Manufacturing Code Example Jobs in Usa

Bars Changeover Specialist (Lean Manufacturing Changeover Specialist)

Location: Albuquerque, NM

Duration: 24+ Months

Position Overview:

• This role will focus on changeover improvements for the Chewy Bars platform. They will work with platform teams, floor teams, site FSQ and department management to understand (a) the size of the prize around changeovers and (b) opportunities to improve changeover time while maintaining effectiveness and safety. A successful individual in this role will use tools such as process mapping, value stream mapping, 5 whys, fishbones, and apply a learning mindset to identify opportunities outside of cleaning practices to reduce CO % on the system.
• When not in changeover, the changeover specialist will be working to learn more about our equipment, how we currently clean it, and why we use the process we currently use. They’ll also be identifying opportunities for improvement and developing experiments for actual changeover time. During changeovers, they’ll be working with the team on the floor to execute experiments, agree on success, and following up immediately with process changes (as is reasonable and feasible). As you can probably guess, this person will have a highly flexible schedule to enable this work.

Key Accountabilties:

• Changeover Reduction Ownership – identify opportunity in current changeovers to improve changeover practices, to include:
• Identify longest lead items
• Develop process standard to run
• Work with team leads to allocate resources more efficiently
• Develop pre-changeover prep strategy
• Teach and coach methodology to treat changeovers just like production, with scheduling, resource allocation, attention to issues, and overall urgency
• Develop best practice clearing for longest lead items
• Strategic Partnership
• Work with FSQ to develop risk rankings and reasons to clean each item
• Instill understanding of why we clean each item
• Work with the floor and platform teams to understand the minimum level of clean required, identify and eliminate overcleaning
• Create and/or revise standard task flows around changeover execution in different areas to enhance speed without sacrificing effectiveness or safety

Embrace a Learning Mindset

• Identify pain points in the clean and:
• Develop understanding of the need to clean those areas
• Develop ways to clean easier via changes in equipment, process, or tools used
• Fully investigate capital opportunities and present to engineering
• Implement all other changes
• “Try it Out!” – assess the risk associated with your ideas, and experiment responsibly

Leverage an External Perspective

• Does another site with similar equipment clean better than us? Gather their best practices, but don’t remain limited to similar equipment! Explore other cleaning best practices.
• Think outside the box – how does your dentist clean your teeth? How does a carwash clean your vehicle? Ever watched a car detailing video on YouTube? What can we take from how cleaning is done elsewhere to implement safer, faster, and/or more effective cleaning HERE?

Minimum Qualifications:

• Bachelor's degree (Engineering/Technical preferred) w/ minimum 5 years of related manufacturing experience OR HS Diploma w/ minimum 10 years of related manufacturing experience
• Working knowledge of data systems including manufacturing systems for Asset and storeroom management, Quality information tracking, ERP, and Safety and Environment management (*** systems used: MAXIMO, MQIS, INSQL, and GSTEMS).

Demonstrated capability in application of Foundational Systems and Driving system utilization.

Effective communication skills (both verbal and written)

Demonstrated ability to effectively coach/utilize standards and processes to drive continuous improvement

Preferred Qualifications:

Lean or Continuous Improvement training

Pay $37-$39 per hour DOE

Seeking a tactical, detail-oriented Quality professional to support external-facing quality records related to raw material suppliers. The ideal candidate will have 3-5 years of hands-on experience managing deviations, change controls, and CAPAs using systems like TrackWise or Veeva. A strong grasp of root cause analysis and investigation review is essential. Candidates should have a background in biotech or medical device industries, with the ability to operate in a fast-paced, remote environment. Bachelors Degree is best but associate-degree holders with deep experience (10+ years) will be considered. Overqualified individuals (e.g., former directors or PhDs) and those without relevant quality records experience should not be submitted.

Quality records experience working with suppliers would be a home run candidate.

Basic project management skills required.

The Specialist Manufacturing is expected to own and execute under minor supervision all the processes related to deviations (minor and majors), Corrective and Preventive Actions (CAPAs), CAPA-Effectiveness Verifications, Supplier Event Notifications and Investigations (SICAR /EN), and Change Control quality records. This Specialist Manufacturing will act as the External Supply representative across functional teams and drive closure of quality records in a timely manner. The Specialist Manufacturing, External Supply owns and manages quality records originating from manufacturing sites across the network. In addition, this role will be the main External Supply quality record owner point of contact for New Albany, OH site.

Responsibilities:

- Address and close quality records (Deviations, Corrective and Preventive Actions (CAPAs), CAPA-Effectiveness Verifications, Supplier Event Notifications and Investigations (SICAR /EN), and Change Control) under the company's quality management system procedures and ensures compliance with regulatory agency requirements.

- Monitors and investigate deviations owned by External Supply and implements corrective / preventive actions. Partner cross-functionally across the site to ensure maturity and execution of robust Deviations / CAPA process

- Build and present quality records summaries for Senior Management review. Provide timely and comprehensive process and status updates to senior management

- Support New Albany, OH site as the external supply quality record owner main point of contact and collaborates with the site and technical teams to evaluate observed supplier related defects.

The candidate will be:

• Responsible for a group of Sub-Commodities for Components (springs, stamping, turned parts, plastic, rubber parts, pistons, electromechanical parts etc) and Outsourced Manufacturing (painting, coating materials, heating treatments etc);
• Working in a cross functional Team with the Global Purchasing Dept, Local Operations, Quality and Logistics;
• Responsible to develop and implement the purchasing strategy on Components and Outsourced Manufacturing in order to maximize the company’s results;
• Responsible to develop and design a proper supplier base in USA and Mexico in accordance to the guidelines of the Global Purchasing Manager, in terms of cost competitiveness, quality, service & innovation;
• Responsible to identify risks and opportunities involved in each sourcing process.

Professional Qualifications & experiences (Hard Skills)

• In-depth experience of Purchasing (NOT LOGISTICS OR PLANNING), at least 5 years, in a multi-country environment and complex Purchasing Organizations.
• Good knowledge and understanding of Purchasing best practice. Experience in buying Components and Outsourced Manufacturing services in an Automotive Companies and in-depth knowledge of the NA supply chain market.
• Ability to work in a truly global organization. Proven experience of working in a fast moving and result driven environment which demands to work under pressure most of the time.

Education / Languages

• Bachelor's degree preferably in Engineering, Manufacturing, Finance, Business or other relevant discipline.

Personal attributes

• Entrepreneurial skills in terms of innovation and problem solving
• Tenacity, tough-mindedness
• Ability to demonstrate strong commitment and team working abilities
• Strong level of autonomy
• Results- driven
• High level of negotiation, influencing and communication skills.

Industrial Electrician – Manufacturing

We are looking for an experienced Industrial Electrician to support maintenance and repair of electrical systems in a manufacturing environment.

Responsibilities

• Troubleshoot and repair industrial electrical equipment

• Work with 480V / 3-phase systems, motors, drives, and control panels

• Read and interpret electrical schematics and wiring diagrams

• Perform preventive maintenance on production equipment

• Assist with equipment installations and electrical upgrades

Qualifications

• Experience as an Industrial Electrician in manufacturing or production

• Strong troubleshooting skills with industrial electrical systems

• Experience with motors, contactors, relays, sensors, and controls

• Ability to work in a fast-paced manufacturing environment

Company Description

EllisLudell, headquartered in Itasca, Illinois, has been a leader in the industrial laundry sector since 1898, offering cutting-edge equipment and solutions. Known for their expert engineering, they design advanced machinery such as Sideloader Washer/Extractor and WHISPERDRYer and provide innovative systems like the Uptime Intelligent Machine Management platform. Focused on sustainability, Ellis develops products that minimize water and energy consumption, reducing costs and environmental impact. With clients in industries such as healthcare, hospitality, and food processing, Ellis specializes in delivering customized solutions that enhance performance and efficiency. Their commitment to innovation and environmental stewardship solidifies their leadership in the industrial laundry industry.

Role Description

At EllisLudell, our Buyers don’t just place orders — they help keep production moving.

We design and manufacture engineered-to-order industrial laundry and water treatment systems used across North America. Every machine we build is different. Every project has a schedule. And every late part has the potential to delay customer shipments.

We’re looking for a mid-level Buyer who thrives in a fast-paced manufacturing environment and enjoys solving real problems — working directly with Engineering, Production, Customer Service, and suppliers to make sure materials arrive when they’re needed.

If you’ve ever found yourself chasing down a critical component so a build doesn’t stall… this might be the role for you.

What You'll Be Doing

• Issue purchase orders for mechanical, electrical, and fabricated components based on engineering BOMs and production schedules
• Monitor open orders and proactively follow up with suppliers to ensure on-time delivery
• Expedite late or critical materials to prevent production delays
• Communicate delivery risks or supply disruptions to internal stakeholders
• Collaborate with Engineering regarding design changes and part revisions
• Work with Production and Customer Service to align material availability with build schedules
• Participate in production meetings as needed
• Engage directly with shop floor personnel to identify and resolve material shortages
• Maintain purchasing data in ERP system
• Support vendor communication regarding order status, lead times, and pricing updates
• Identify opportunities to improve planning and reduce reactive expediting
• Participate in occasional supplier visits, particularly during onboarding or when addressing delivery/quality concerns

Qualifications

• 3+ years of purchasing experience in a manufacturing environment
• Experience working within an ERP system
• Strong organizational and time management skills
• Proficiency in Microsoft Excel
• Ability to manage multiple priorities in a deadline-driven environment
• Effective communication skills across departments and with suppliers

Preferred (But Not Required)

• Experience in engineered-to-order or custom equipment manufacturing
• Ability to read and interpret engineering drawings or BOMs
• Experience purchasing mechanical or electrical components
• Exposure to supplier performance management or vendor negotiation
• APICS certification or similar supply chain training

Compensation & Benefits

• Salary Range: $70,000 – $90,000 annually (based on experience)
• Health insurance
• 401(k)
• Paid time off
• Company holidays

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Helper Manufacturing to join our Fabrication team in Algona and Auburn, Washington. 

Join our innovative manufacturing team as a Helper, where your contributions will play a vital role in the production process. In this dynamic position, you will utilize a variety of hand and power tools to perform essential tasks such as sorting, cleaning, and preparing parts for assembly and finishing. Your attention to detail will ensure that identification markings are accurately applied, while your organizational skills will help maintain a clean and efficient workspace. You will collaborate closely with skilled employees, assisting in mechanical and paint duties, and ensuring safety protocols are followed in high-stakes environments. Your ability to operate specialized equipment, such as the video jet marking machine and anodizing processes, will be crucial in supporting our production goals. If you are passionate about contributing to a team that values quality and precision in manufacturing, we invite you to be a part of our mission to deliver excellence. 

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities:

• Perform various duties using hand or power tools, including staking, filing, trimming, sawing, buffing, drilling, sanding, and filling to facilitate assigned tasks. 

• Sort, count, wrap, unwrap, and clean parts, tools, assemblies, or equipment as required. 

• Maintain cleanliness and organization of work areas by sweeping, cleaning, and picking up materials and parts. 

• Move, pack, and unpack boxes, materials, parts, tools, and equipment, ensuring proper handling and storage. 

• Apply identification numbers or letters (part marks) to parts, materials, or assemblies using various marking methods (e.g., steel, rubber, electro-etch). 

• Rack and unrack tubes and materials, applying dust caps and seals, and verifying configuration discrepancies against samples. 

• Assist higher classification employees with mechanical and paint duties, including filling pots, moving lifts, and setting up/removing painting equipment. 

• Maintain surveillance in paint and assembly areas, ensuring safety procedures are followed and assisting incapacitated employees as needed. 

• Perform masking processes, including applying masking tape and protective materials to parts in preparation for painting or plating operations. 

• Finish contoured and flat surfaces to required specifications using abrasive materials prior to and after painting, including hand touch-ups. 

• Clean and service paint spray application equipment, including tanks, brushes, and hoses, after use. 

• Review Work Orders (WOs) and drawings to determine work requirements and obtain necessary tools and specifications using online computing equipment. 

• Operate and maintain the video jet marking machine, ensuring proper fluid levels and cleanliness of heads. 

• Assist in the anodizing process by loading and unloading detail parts on/off the load bar and performing low-pressure tests on tubing. 

• Count, load, and protective wrap finished production parts for shipment to the next operation, and log completed jobs into the Decac MRM system. 

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.  

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. 

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee 

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. 

Basic Qualifications:

• 1+ years of experience using basic math (e.g. addition, subtraction, multiplication and division)

• 1+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design)

• Must be able to lift, push and pull up to 35 pounds frequently within an 8-hour shift

• Must have basic computer experience and competency skills

Typical Education & Experience:

High school graduate or GED preferred. 

Relocation: 

Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. 

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. 

Shift Work Statement:

This role is primarily second shift; however, there may be additional shift requirements to support program objectives.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.    

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.    

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay: $21.32/hour, with potential to earn up to $48.70/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 25, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Category: QUALITY

Requisition Number: QUALI002369

Posted: March 6, 2026

Full-Time

NMG Aerospace - ARIZONA

Tempe, AZ 85282, USA

At NMG Aerospace our Quality Inspector 1 are responsible for receiving, in-process, and final inspections / audits of parts/assemblies/processes to meet customer specifications, purchase order, and quality requirements. Determine part conformity, compliance, and ensure that it is suitable for use by our customer.

Hours are: Monday - Friday 6:00 am to 2:30 pm

Job Summary:

Responsible for receiving, in-process, and final inspections / audits of parts/assemblies/processes to meet customer specifications, purchase order, and quality requirements. Determine part conformity, compliance, and ensure that it is suitable for use by our customer.

Essential Job Functions:

• Inspect/audit product using basic variable or attribute measuring equipment and record results to ensure conformance with part and customer requirements.
• Be able to read and understand aerospace specifications, military specifications, industry specifications, and/or manufacturing instructions.
• Be able to read and interpret basic print requirements.
• Review, control and maintenance of paperwork, documents, certs, and records.
• Process DMR's.

Additional Duties:

• Provide support for Lean manufacturing and continuous improvement initiatives, companywide.
• Other duties, reporting, special assignments, or projects as needed and assigned.
• Must remain current with and complete all required training as assigned.
• Must adhere to Company Corporate EHS Policy and department, occupation, and task specific safety protocols, including but not limited to Personal Protective Equipment (PPE) requirements.

Qualifications:

• Demonstrated competency with metrology equipment.
• Computer Skills: Microsoft (Excel, Outlook, and Word), digital imaging, Adobe Acrobat.
• Must submit to and satisfactorily pass any pre-employment screening required for employment with the Company.
• Must take medical exams required by law, in conjunction with occupation specific activities, the physical work environment, and ongoing industrial hygiene sampling results.
• Depending on assignment, may be required to use stairs, remain upright and/or seated for prolonged timeframes, intermittently reposition the body per various tasks performed, and use various tools and work-related supplies.
• May be required to perform manual lifting activities, not to exceed a 40lb lift performed by one individual.

Education:

• High School diploma or equivalent

In addition to competitive wages, NMG is proud to offer a retirement savings plan with company matching opportunity, excellent health and wellness benefits including a $350 annual wellness allowance for assistance with personal health and fitness goals, can earn up to 5 weeks paid-time off, on the job training, education assistance, and a variety of other supportive programs to meet our team member's needs.

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Job Overview

To assemble components per manufacturing work instructions that meet production efficiencies and quality requirements.

Job Responsibilities and Essential Duties

• 
  
• Ability to perform low-moderate assembly process.
  
• Ability to follow written and verbal instructions.
  
• Ability to perform tasks at established manufacturing standards.
  
• Demonstrate attention to detail and the ability to interface with team members.
  
• Demonstrate good manufacturing practices including recordkeeping.
  
• Operate in a clean room environment.
  
• Maintains safe, clean and healthy work environment by following and enforcing standards and procedures; complying with legal regulations.
  
• Work in a fast-paced environment constructing various components.
  
• Perform other related duties as required.
  

Minimum Requirements

• 
  
• High School Diploma or equivalent.
  
• Open to working 2nd Shift (3:00PM - 11:30PM)
  
• Basic computer skills with MS Office applications (Word/Excel) preferred.
  
• Ability to read, understand and comprehend directions - written and verbal (English).
  
• Must be open to working in a cleanroom environment
  

Required Knowledge, Skills and Abilities

• 
  
• Must have a high commitment to safety.
  
• Able to pay close attention to detail.
  
• Must have good judgment, positive attitude and a high level of initiative.
  
• Good communication skills, both written and spoken.
  
• Good finger and hand dexterity.
  
• Capable of working in a fast paced, dynamic environment.
  

Pay rate: $21.50/hr

#LI-BS1

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  
• Parental and Caregiver Leave
  
• Tuition Reimbursement
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

HIRING FOR ADVANCED MACHINE OPERATOR ROLES!

APC offers state-of-the-art equipment in a climate-controlled environment that has been named "Best of the Best" in the Best Workplaces in the America's for 12 years in a row!

WAGES STARTING AT:

* $25.46 + PER HOUR

* $3.00 PER HOUR NIGHT SHIFT DIFFERENTIAL

American Packaging Corporation offers an industry-leading benefits package:

* Medical/Health Insurance

* Dental - Employer Paid

* Vision - Employer Paid

* Short Term Disability - Employer Paid

* Long Term Disability - Employer Paid

* FSA - Health and/or Childcare

* Paid Holidays - 11

* PTO

* 401 (k) - lucrative employer matching

* Bonuses including yearly holiday, 401k and quarterly production

Benefit eligibility begins in the first 60 days of employment

Experienced Manufacturing Candidates- APPLY TODAY!

12-hour shift on a 2-2-3 Schedule

Day & Night Shift Available

Cedar City Location: Reliably commute (Required)

Manufacturing: 1+ year (Required)

For over a century, American Packaging Corporation (APC) has been a leading flexible packaging converter for customers throughout North America. We nurture our employees by providing competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs. These are just a few reasons why we were named a "Best of the Best" in the Best Workplaces in the Americas awards for 12 years in a row. APC's longstanding success is fueled from the inside out, and we consistently seek to improve our internal operations to propel that success into the future. ?Apply now and join a company that cares about you, your family, and your career!?

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) required. Previous manufacturing experience preferred.

LANGUAGE SKILLS

Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.

MATHEMATICAL SKILLS

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

REASONING ABILITY

Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear. The employee is occasionally required to walk and reach with hands and arms. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to airborne particles and vibration. The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.