Mantech Electronics Jobs in Usa

Summary:

HCLTech is looking for a highly talented, self-motivated and Experienced PLC Engineer to join it in advancing the technological world through innovation and creativity.

Job Title: Electrical PLC Engineer

Job ID: 1543025BR

Position Type: Fulltime

Location: Milpitas, CA

Key Skills & Experiences required :

• Experience in control systems and Safety interlock circuits.
• Expert in Siemens PLC program development
• Hands on experience in component selection (Cables, wire, connectors and harnesses accessories)
• Experience in Power budget and load calculation and Electrical component selection
• Semi experience in Harnesses design for PDU, Racks, Process equipment's
• Hands on experience in electrical schematic design and system level interconnect diagram design
• Knowledge on the thermal test and power measurement
• Material procurement and Design Validation
• Capable to understand the high-level system requirement and providing workable solution
• Good knowledge in compliance NFPA, CE, SEMI S2, S8
• Knowledge of Clean room and SEMI standards is an added advantage.
• Aspire to own complete product cable harness, PDU design ownership and installation

Education & Experience

• Bachelor's degree in electrical, Electronics, Mechatronics, or related field.
• Minimum 5+ years of relevant experience in Electrical Engineering

Pay and Benefits

Pay Range Minimum: $68000 per year

Pay Range Maximum: $110000 per year

HCLTech is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to for investigation.

Compensation and Benefits

A candidate's pay within the range will depend on their work location, skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year.

How You'll Grow

At HCLTech, we offer continuous opportunities for you to find your spark and grow with us. We want you to be happy and satisfied with your role and to really learn what type of work sparks your brilliance the best. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries. We believe that you should be in control of your career with unlimited opportunities to find the role that fits you best.

Our client, Japanese Electronics manufacturing company, is seeking a Data Analyst in the Schaumburg area with 2+ years of experience.

Title: Data Analyst

Location: Schaumburg IL (Hybrid 3 days on site)

Type: Full Time Direct Hire

Salary: 55-60K

Key Responsibilities

• Develop and analyze eight-month sales forecasts; perform variance and gap analysis against actuals and plans.
• Monitor daily sales/order performance and deliver regular status and management reports.
• Identify data discrepancies and partner with sales to resolve issues and improve accuracy.
• Support short- and long-term sales planning through data-driven insights and risk analysis.
• Manage ERP (SAP/OASIS) master data and provide system support, enhancements, and user training.
• Support audit requirements and conduct market research and ad hoc analysis as needed.

Qualifications

• Strong verbal and written communication skills.
• Japanese language skill preferred.
• Professional collaborator with ability to support senior management.
• Detail-oriented and able to manage multiple deadlines with accuracy.
• Proficient in Excel, Power BI, Outlook, Word, PowerPoint, and SharePoint; skilled in database mining and large data analysis.
• Bachelor’s degree (or equivalent) with 2+ years of relevant experience.

**Please submit your application with a 1-2 page resume. Only qualified applicants will be contacted**

The Manufacturing Supervisor is responsible for supervising daily manufacturing operations and production personnel to ensure production goals are met safely, efficiently, and in accordance with quality standards. This role leads and coordinates training and cross-training initiatives to build workforce flexibility, capability, and coverage. The Manufacturing Supervisor provides direct supervision to production staff, supports continuous improvement initiatives, and ensures consistent execution of production plans, policies, procedures, and standard work.

Supervisory Responsibilities

• Promote a positive, accountable, and team-oriented work environment
• Provide mentorship, development, coaching, and appropriate feedback for team member career pathing and growth
• Support and coordinate staffing needs including cross-training and skills development
• Directly supervise production personnel, managing their production schedules and standard work execution daily
• Conduct performance evaluations
• Ensure company policies and procedures are followed; assist with corrective action and disciplinary processes in accordance with company policy as needed

Essential Duties and Responsibilities

Leadership & Communication

• Develop and grow team member skills, aligned to support our operations roadmap
• Act as a liaison between the Manufacturing Manager and the production team members to ensure clear communication and alignment
• Communicate production performance, risks, and issues to management in a timely manner
• Support training initiatives, standard work development, and skills progression for the team
• Assist department and company leadership with special projects and assignments as needed

Safety & Quality

• Enforce safety standards and safe work practices; lead by example in maintaining a strong safety culture
• Ensure production processes comply with quality standards, work instructions, and regulatory requirements
• Support investigations of quality issues, implement corrective actions, and verify effectiveness
• Conduct floor audits, inspections, and compliance checks as required

Continuous Improvement

• Identify and drive opportunities for process improvement, waste reduction, and efficiency gains
• Lead and support continuous improvement initiatives (Lean, Kaizen, standard work)
• Ensure improvements are documented, trained, and sustained on the production floor

Production & Operations

• Supervise daily production activities to ensure schedules and targets are met
• Assign labor, balance workloads, and address production constraints
• Serve as the primary escalation point for production, quality, safety, and equipment issues on the floor
• Partner with the Manufacturing Manager and supply chain roles to execute production schedules and adjust priorities as needed
• Monitor equipment performance and coordinate to minimize downtime

Requirements

Qualifications, Knowledge, Skills & Abilities

Required

• Bachelor’s degree in Operations Management, Engineering, Industrial Management, or related field OR equivalent leadership experience in manufacturing
• Minimum of three (3) years of leadership experience in a manufacturing environment (Lead, Supervisor, or equivalent)
• Strong working knowledge of manufacturing processes, safety standards, and quality systems
• Demonstrated ability to supervise and develop team
• Strong communication, organizational, and problem-solving skills
• Proficient with Microsoft Office Suite

Preferred

• Electronics manufacturing experience
• Experience supporting or leading continuous improvement initiatives
• Experience working with an ERP system

Job Description

Sanmina Corporation (Nasdaq: SANM) is a leading integrated manufacturing solutions provider serving the fastest-growing segments of the global Electronics Manufacturing Services (EMS) market. Recognized as a technology leader, Sanmina Corporation provides end-to-end manufacturing solutions, delivering superior quality and support to Original Equipment Manufacturers (OEMs) primarily in the communications networks, defense and aerospace, industrial and semiconductor systems, medical, multimedia, computing and storage, automotive and clean technology sectors. Sanmina Corporation has facilities strategically located in key regions throughout the world.

The Sanmina Fremont facility is a full-service enclosure systems solution manufacturing plant. Located in California’s Silicon Valley, this facility produces low-to-mid volume New Product Introduction (NPI) runs to full-scale volume. The Fremont facility offers everything from small piece parts to fully integrated and tested systems. In addition, this location offers in-house painting capabilities and flexible logistics solutions in distribution, inventory management and hubbing, as well as repair services.

Job Purpose- The Production Manager is responsible for the direct management of all manufacturing and production activities for complex fabricated sheet metal, tubular frames, final assembly & test of a variety technical components & products. This role focuses on optimizing shop floor processes, ensuring product quality, meeting production schedules, and maintaining a safe working environment, directly supporting the strategic goals set by the Plant Manager.

Key Responsibilities

Production & Efficiency Management

• Oversee the daily execution of production schedules across multiple departments (e.g., sheet metal fabrication, welding, powder coat painting, final assembly, testing) to ensure on-time delivery (OTD) targets are met.
• Drive the implementation and application of Lean Manufacturing principles and Continuous Improvement initiatives (e.g., 5S, Standard Work, Waste Reduction) to enhance operational efficiency and reduce manufacturing cycle time.
• Monitor key operational metrics, including Overall Equipment Effectiveness (OEE), scrap rate, and labor utilization, taking corrective action as necessary.
• Coordinate with the Engineering department to manage the introduction of new products (NPI) smoothly into production and resolve complex manufacturing issues.

Quality and Safety

• Champion a rigorous Safety (HSE) program on the shop floor, ensuring all employees adhere to strict safety protocols and environmental compliance standards.
• Work closely with the Quality team to maintain high product quality, ensure compliance with the ISO 9001 standard, and manage in-process quality control gates.
• Lead and support teams in performing Root Cause Analysis (RCA) for production defects and implementing sustainable corrective and preventive actions (CAPA).

Team and Resource Management

• Directly supervise Production Supervisors, leading, mentoring, and developing the manufacturing workforce.
• Manage labor planning, scheduling, and capacity requirements to match demand fluctuations.
• Collaborate with Materials Planning, Purchasing and Logistics teams to optimize inventory levels and ensure the timely flow of components to the production line.

Qualifications

Education: Bachelor's degree in Industrial Engineering, Manufacturing Engineering, Operations Management, or a related technical field.

Experience: Minimum of 7+ years of experience in a manufacturing environment, with at least 3 years in a management or senior supervisory role overseeing production operations.

Industry Knowledge: Hands-on experience in the heavy electrical equipment or similar industrial manufacturing sector is highly preferred as is familiarity with processes for MV products (e.g. electrical assembly, insulation processes).

Technical Skills:

• Proven expertise in Lean Manufacturing and Continuous Improvement methodologies.
• Strong working knowledge of manufacturing ERP/MRP systems and production scheduling tools.

Leadership: Exceptional problem-solving skills, decisiveness, and proven ability to manage and motivate a large, diverse manufacturing workforce in a fast-paced environment.

This is an ITAR facility and applicant must be a US Citizen or a lawful permanent resident.

Sanmina is an Equal Opportunity Employer – M/F/Veteran/Disability/Sexual Orientation/Gender Identity

Job description:

Overview

The Engineer/Programmer is responsible for preparing and validating PCB fabrication and assembly data packages while also programming and supporting production equipment across Adura’s SMT, inspection, and electrical test platforms.

This role bridges design-to-manufacturing execution by converting customer data into production-ready CAM outputs and machine programs for SMT lines, AOI, X-ray, and Flying Probe systems. The position plays a critical role in enabling high-reliability thermal PCB-A production for Automotive, Medical, Defense, and Aerospace markets.

Key Responsibilities

CAM & DFM Responsibilities

• Review customer Gerber, ODB++, IPC-2581, and CAD data for manufacturability
• Create panel layouts optimized for yield, SMT flow, and thermal PCB constraints
• Define stack-ups, copper weights, materials, impedance requirements
• Perform DFM analysis for heavy copper, metal-core, and high-power designs
• Generate fabrication drawings, drill files, and production documentation
• Manage revision control and maintain accurate data records
• Support quoting with panel yield calculations and fabrication cost drivers

Machine Programming & Production Support

• Program SMT pick-and-place machines (component libraries, feeder setup, placement files)
• Generate and optimize solder paste printer programs (alignment, offsets, stencil parameters)
• Program 3D SPI inspection parameters and board models
• Develop AOI inspection programs and tuning criteria
• Support X-ray inspection programming for void analysis and BTC/QFN inspection
• Create and validate Flying Probe test programs for electrical verification
• Assist in NPI builds by debugging programs and optimizing cycle time
• Maintain component libraries and machine databases
• Collaborate with Process Engineering to optimize placement strategy and throughput

Requirements

• 3+ years experience in PCB CAM and SMT manufacturing environments
• Proficiency with CAM350, Genesis, or equivalent CAM software
• Hands-on experience programming SMT equipment (printer, pick-and-place, AOI)
• Familiarity with X-ray and Flying Probe programming environments preferred
• Strong understanding of PCB stack-ups, thermal materials, heavy copper routing
• Experience with high-mix / low-to-medium volume production environments
• Strong documentation and attention to detail
• Ability to troubleshoot machine programs and support production ramp-up

Ideal Candidate Profile

• Comfortable moving between CAD data and production floor
• Strong problem-solving mindset
• Detail-oriented but production-focused
• Understands impact of programming decisions on yield and cycle time
• Familiar with IPC Class 2/3 environments

Benefits:

• 401(k)
• Dental insurance
• Health insurance
• Paid time off
• Vision insurance

Experience:

• SMT Programming: 2 years (Required)
• CAM programming: 1 year (Required)
• electronics manufacturing: 1 year (Required)

Work Location: In person

Why join AVIRE?

Do you have an entrepreneurial mindset? Do you like being part of high growth, high impact environments? Are you looking for an opportunity to lead a world class team intent on providing an unrivalled customer experience? If you have answered yes to these questions, we should connect!

The Avire Sussex, WI team is looking for a highly driven, highly motivated individual to take us to new heights. In this role, you will be responsible for planning, coordinating, and deploying the resources necessary to ensure our manufacturing capabilities grow with the organization focusing on continuous improvement--ensuring that our team is supported to effectively build high-quality products for our customers. Our assembly team is critical to our success as an organization as we produce high quality products that surpass customer expectations. You will be a part of a team of dedicated Production, Shipping and Receiving personnel, Supply Chain professionals, Technical Support Specialists, and Operations experts with the collective goal of supplying high quality products with a best-in-class lead-time exceeding our customer’s highest expectations. Further, you will be a part of a team that has a track record of delivering double digit compound growth while supporting each other. This position reports to the Operations Manager.

What you will do:

1. Sets clear, attainable production-level and cell-level production targets and direct the team to meet these objectives.
2. Manage daily production activities for the assembly cells including scheduling, production quality, material shortages and nonconformance reporting.
3. Manage the production employees, including performance management, health and safety, and individual training & development.
4. Work cross-functionally to ensure effective production processes and align resources to meet both customer & business demands.
5. Work directly with product management to ensure sustainable production for critical products while providing guidance to drive design for manufacturing/design for automation improvements. Facilitates new product integration and manages related engineering changes.
6. Build a culture of continuous improvement to ensure effective labor and materials management are engrained in everyday activities. Support continuous improvement initiatives and implement and evaluate outcomes.
7. Work directly with operational leadership to manage production requirements in alignment with business objectives & strategies and prepare monthly production reports.
8. Maintain production standards to ensure accurate labor reporting and costing.
9. Ensure compliance with local standards and maintains a safe working environment.
10. Perform other duties as assigned.

We want someone who displays:

Action-Oriented Curiosity: You readily take on challenges, and you identify and seize new opportunities. You have an outstanding history of delivering on your projects. You work on the problems that truly need solving, and you effectively challenge the organization to be better. You can cut through the clutter and focus on the priorities that align with organizational objectives.

Collaboration: You embrace the unique experiences, viewpoints, and abilities of your teammates and proactively engage those differences to come to the best possible outcome.

Empowerment: You thrive in an environment where you can make decisions. You do not shy away from taking a stand, and you recognize the importance of challenging the team to ensure that we strive for more. You take responsibility to solve customer problems the first time.

Accountability: You take responsibility for your actions, and you deliver on your commitments.

Inclusion: In all aspects of your work, you treat everyone with respect.

Performance Objectives

1. Cells are functioning effectively and team members are deployed in alignment with the needs of the business.
2. Lean principles are implemented and driven throughout the organization.
3. Performance management, including training & development, is process-driven and implemented consistently throughout the manufacturing team.
4. Plan production schedule and allocate resources to drive efficient, timely output, targeting improved productivity.

Job Skills

• Strong interpersonal and communication skills
• Proven problem-solving proficiency
• Proven ability to lead hourly employees in a manufacturing environment
• Experience in electronics manufacturing a plus
• Experience with KPI metric management and deployment
• Excellent written, verbal, and interpersonal skills to work effectively with diverse groups of people both within, and outside, of the organization.

Qualifications

• Bachelor’s degree in engineering, engineering management, supply chain or a related field
• A minimum of 5 years’ experience in a production environment holding positions of progressive responsibility
• Alternative combinations of education and experience will be considered
• A minimum of 3 years’ experience in a direct management position
• Strong interpersonal and communication skills at all organizational levels
• Strong decision-making skills and results-driven approach
• Proven analytical ability and familiarity with a KPI-driven operations environment
• Proficiency in Lean Principles a plus: Problem Solving, 5S, Flow, Standard Work, Kanban

Who is AVIRE?

Connecting and Protecting People. AVIRE combines 4 market-leading brands (Rath, Janus, Microkey, and Memco) within the elevator and emergency communications industries; currently offering light curtains, area of refuge, emergency telephones / GSMs, and life safety solutions. Each brand has a strong market presence, a unique identity, a distinct product range, and a long, successful history. The group has manufacturing locations in 2 countries, R&D in 2 countries and Sales & Marketing in 8 countries employing over 400 people globally.

AVIRE is part of the Halma group ( ). Halma bets on talent! We are looking for bright, ambitious people to join our team and stay for the long term. With over 50 businesses under its ownership, Halma is a great place to start, advance, or accelerate your career.

Benefits

• Competitive salary
• Organizational bonus plan
• Complete benefits package including health, dental & vision insurance, 401K, paid vacation, paid holidays, and generous parental leave
• Professional development training opportunities
• Company events (i.e. bbq’s, lunches, bowling and much more)!
• 4 x 10 hour schedule Monday – Thursday

Must Haves:

• 3+ years in Quality Assurance in manufacturing/production/assembly
• Experience working in automotive, semiconductor, electronics, or highly automated environments
• 2+ years in a supervisor role
• Experience working with Lean Manufacturing/JIT, Six Sigma methodologies and Total Quality fundamentals

Plusses:

• Certifications (UL1703, IEC 61215, IEC61730-1, IEC61730- 2, Green Belt, etc)
• Experience with solar modules

Job Description:

The Quality Supervisor is responsible for overseeing and ensuring the implementation of quality control measures and standards within the organization. You will play a crucial role in maintaining and improving the quality of products, processes, and services. Your attention to detail, analytical skills, and leadership abilities will contribute to the overall success of the company's quality management efforts.

Responsibilities:

• Manage daily performance of QC staff
• Responsible for leading, motivating, and training QC personnel to meet or exceed department and company goals and objectives
• Lead or assist in Quality department projects as assigned by Management and assist Engineering and Manufacturing with projects, as appropriate
• Investigate root cause of customer complaints and initiate/complete corrective action, as appropriate
• Propose, promote and champion actions to improve quality, processes and product
• Eliminate process variation and product defects through creative solutions
• Maintain ISO based quality systems
• Implement and manage systems to complete statistical analyses and control of all products including raw materials, WIP materials, non-conforming products, and finished goods
• Ensure customer requirements are met
• Devise ways to reduce waste and increase efficiency
• Actively drive Lean Manufacturing initiatives using all available tools and technologies
• Maintain professional and technical knowledge by attending educational workshops, reviewing professional publications, establishing personal networks, and participating in professional societies
• Participate in internal and external audits
• Develop and present KPI reports

Job title: Control Engineer

Location: Lancaster, PA

Position: Long term contract

Job Overview

• We are seeking a skilled Controls Engineer to support, maintain, and enhance automation systems within our Injection Molding facility.
• The role involves developing, troubleshooting, and optimizing control systems for injection Molding machines, auxiliaries, and related automation to ensure high efficiency, quality, and reliability of production.
• Key Responsibilities
• Design, develop, and maintain PLC/HMI/SCADA-based control systems for injection Moulding machines and auxiliary equipment (robots, dryers, chillers, conveyors, etc.).
• Troubleshoot electrical and automation issues to minimize downtime.
• Program and modify PLCs (Siemens, Allen-Bradley, Mitsubishi, etc.) and HMIs to improve cycle times, efficiency, and safety.
• Vision systems (Cognex, Keyence, Omron, Sick, Basler, OpenCV-based solutions) for inspection and defect detection.
• Integrated vision inspection systems for in-line defect detection, dimensional accuracy, and traceability.
• Integrate new machines, robotics, and automation equipment into existing systems.
• Ensure compliance with safety standards, electrical codes, and company policies.
• Collaborate with maintenance, production, and quality teams to resolve automation and process-related issues.
• Provide documentation (wiring diagrams, control logic, program backups, change logs).
• Support preventive and predictive maintenance activities for automation systems.
• Lead or support continuous improvement initiatives such as Industry 4.0/IIoT integration, data acquisition, and energy optimization.
• Train technicians and operators on control system functionalities and troubleshooting.

Qualifications & Skills

• Bachelor’s degree in Electrical, Electronics, Instrumentation, Mechatronics, or related field.
• 7+ years of experience in automation/controls engineering, preferably in plastics or injection Moulding industry.
• Hands-on experience with PLC programming (Siemens, Allen-Bradley, Mitsubishi, or similar).
• Familiarity with robotics (Fanuc robot, SCARA robot or similar) and integration with Moulding machines.
• Strong knowledge of industrial communication protocols (Ethernet/IP, Profinet, Profibus, Modbus, OPC-UA).
• Experience with SCADA, HMI development, and data logging systems.
• Solid understanding of electrical schematics, motor controls, VFDs, and safety circuits.
• Problem-solving mindset with the ability to work under pressure in a fast-paced production environment.
• Good communication skills and ability to work in cross-functional teams.
• Preferred (Nice-to-Have)
• Experience in injection Moulding process optimization (cycle time reduction, scrap reduction).
• Knowledge of Industry 4.0, MES, or IIoT platforms.
• Exposure to vision systems and quality inspection automation.
• Familiarity with ISO/TS standards for manufacturing.

SUMMARY DESCRIPTION:

The R&D Testing Technician will execute daily engineering test assigned by Engineering Manager. The candidate will perform various acoustical, mechanical, and electrical tests. The candidate will support the engineers in their ongoing R&D testing to achieve their task on time. The candidate should be well organized, has strong attention to details and able to work in fast paced environment

SPECIFIC DUTIES AND RESPONSIBILITIES:

• Perform engineering tests including and not limited to: Acoustical testing, mechanical testing and electrical testing
• Documenting and archiving test results and test procedures
• Work with various mechanical tools and fixtures to conduct tests
• Work with electronic test equipment
• Manage the engineering lab, make sure tools and equipment are arranged in the right spot and perform 5S to the labs
• Manage engineering samples with proper labels and arrange them in cabinet
• Support engineers in new developed test procedures by documenting the test procedures
• Support engineers in shipping samples out to customers, purchase experimental parts from website

POSITION REQUIREMENTS:

• Associate’s degree in engineering, Electronics, or equivalent work experience
• Ability to set up and utilize electronic test equipment such as multimeters, oscilloscopes, and run LabVIEW code
• Ability to work with various fixtures and tools to conduct various testing
• Able to multi-task and work fast paced environment to meet deadlines
• Attention to detail and organized
• Excellent communication skills
• Self-motivated and eager to learn
• Ability to follow instructions
• Basic knowledge of computers, spreadsheets, and power point

REPORTING RELATIONSHIPS:

Reports to: Sr. Manager Application Engineering – MedTech & Specialty Audio

Materials Planner II

Broadband Telcom Power is an EV charging equipment manufacturing company focused on delivering reliable power solutions that support the future of electric mobility. We are seeking a Materials Planner II to support field service parts planning and new product material readiness. This role plays a key part in ensuring service material availability, inventory optimization, and strong customer support performance.

Job Summary

The Materials Planner II supports planning and purchasing activities for field service materials and new product introductions. This position partners closely with customer service, supply chain, and engineering teams to maintain inventory balance, support production demands, and proactively manage material risks.

Responsibilities

• Plan and purchase field service parts for key customers, partnering closely with customer service to minimize shortages while meeting service-level expectations

• Manage and balance Vendor Managed Inventory (VMI), including monitoring demand trends, failure rates, recall events, and customer requests

• Ensure all part substitutions are properly communicated, documented, and approved by customers as required

• Review forecasts and develop long-term material planning strategies to support field service and production needs

• Drive purchasing activity to support demand for field service or production materials

• Maintain appropriate inventory levels of raw materials and NPI finished goods through product development and release stages

• Track production volume and monitor customer demand patterns to proactively address supply risks

• Perform excess and obsolete (E&O) analysis, prepare inventory reports, and lead E&O review discussions with clear recommendations

• Manage inventory challenges including schedule changes, cancellations, and material constraints

• Prepare and publish cost estimates, inventory reports, and KPI updates

• Proactively escalate and resolve material challenges with internal teams and external customers while balancing service and business priorities

Qualifications / Requirements

• Bachelor’s degree in Business or a related field

• Minimum of 4 years of experience in an electronics manufacturing environment

• Strong analytical and problem-solving skills

• Advanced proficiency in Microsoft Excel and PowerPoint

• Strong communication skills with the ability to work across all levels of the organization

• Ability to manage multiple high-priority projects in a fast-paced environment

• Self-motivated and able to work independently with clear goals and accountability

• Strong collaboration skills and experience working with cross-functional teams, including remote teams

• Demonstrated initiative and ability to drive resolution of material and inventory issues

Benefits

• Holiday Pay and Paid Time Off

• Medical, Dental, Vision, Life and AD&D Insurance

• 401(k) Retirement Plan with Company Match

• Opportunity to grow and develop professionally

EEO Statement

Broadband Telcom Power provides equal employment opportunities to all employees and applicants and prohibits discrimination and harassment of any kind in accordance with applicable federal, state, and local laws.