Loenbro Electrical Jobs in Usa

Electrical Test Engineer – Commercial Chiller Systems

Location: Charlotte NC

Job Type: Full time

Job Description

This role is responsible for the validation and certification of commercial chiller systems. The position focuses on electrical system design evaluation, instrumentation, test execution, data analysis, and compliance with applicable industry standards. Engineers will work closely with mechanical engineers, lab technicians, and quality teams to ensure chiller performance, safety, and reliability.

Key Responsibilities :

· Maintain all electrical systems fully functional to test HVAC systems (water-cooled and air-cooled chillers)

· Plan, execute, and support electrical testing of commercial chillers, including air-cooled and water-cooled systems

· Troubleshoot control circuits and low-voltage wiring on water-cooled and air-cooled chillers

· Develop and review electrical test procedures, wiring diagrams, and control schematics

· Set up and validate test instrumentation for voltage, current, power, harmonic distortion, and control signals

· Troubleshoot electrical, controls, and communication issues during system testing

· Analyze test data and prepare technical reports documenting results, issues, and corrective actions

· Support compliance testing to applicable standards (e.g., UL, IEC, AHRI, ASHRAE)

· Collaborate with design engineering teams to identify root causes and recommend design improvements

· Support factory acceptance testing (FAT), qualification testing, and reliability testing

· Ensure testing activities comply with lab safety procedures and electrical safety requirements

· Provide technical support during audits, certifications, and customer witness testing

Required Qualifications:

· Bachelor’s degree in Electrical Engineering or related field

· 3–7 years of experience in electrical testing, validation, or product development (HVAC or industrial equipment preferred)

· Strong understanding of three-phase power systems, motor drives, starters, and VFDs

· Experience with electrical test equipment (power analyzers, oscilloscopes, multimeters, data acquisition systems)

· Knowledge of control systems, PLCs, sensors, and communication protocols (Modbus, BACnet, CAN, etc.)

· Ability to read and interpret electrical schematics and wiring diagrams

· Strong troubleshooting and problem-solving skills

· Proficiency in technical documentation and test reporting

· Familiarity with lab safety standards and electrical codes (NFPA 70 / NEC)

Preferred Qualifications

· Experience with commercial chillers, large HVAC equipment, or refrigeration systems

· Familiarity with industry standards such as ASHRAE 90.1, AHRI 550/590, UL 1995, IEC 60335

· Experience working in an engineering laboratory or test environment

· Knowledge of energy efficiency testing and performance certification

· Experience with automated test systems and data analysis tools (LabVIEW, Python, MATLAB, or similar)

· Professional Engineer (PE) license or EIT certification

Key Competencies :

· Primarily laboratory-based role with exposure to high-voltage equipment and rotating machinery

· Occasional extended hours during test execution or customer witness testing

· Strict adherence to safety protocols and PPE requirements

Company Overview

Bashas’ is a family-owned, regional grocer that operates in Arizona, New Mexico and serves four Tribal Nations under five well-known brands including Bashas’, Food City, AJ’s Fine Foods, Eddie’s Country Store, and Bashas’ Diné supermarkets. Founded in 1932, Bashas’ has a rich history of serving Arizona families with quality products and great customer service. With more than 110 grocery stores, Bashas’ is one of the largest employers in the state and we are committed to nourishing the communities we serve through purposeful partnerships and giving centered around our vision and purpose of changing the way we eat one plate at a time.

Shared values led Bashas’ to join The Raley’s Companies in 2021 and the partnership has enhanced our core business through technological advancements, shared learning, leadership development and new offerings. With more than 21,000 team members, we are united by a higher purpose: to deliver quality offerings, exceptional service, and to do right by our people, communities, and planet.

Whether through our commitment to nutrition and wellness or Bashas’ legacy of giving back over $100 million to local communities, we strive to empower customers with transparency, education, and access to fresh, affordable, and nourishing food. We’re looking for the same kind of passionate people to join our team, grow with us and share our purpose.

Position Overview

Are you an expert in electrical systems, energy management, and construction practices — and passionate about improving performance across an entire multi‑site organization? As the Manager of Electrical Systems, you’ll lead critical energy management initiatives, oversee electrical construction activities, and guide a high‑performing team responsible for delivering efficient, safe, and cost‑effective solutions across stores, facilities, and support center locations.

In this role, you’ll manage energy reduction programs, direct electrical construction from design through completion, partner with vendors and utilities, and ensure compliance with industry regulations. You’ll also provide servant‑style leadership, empowering your team to innovate, grow, and meet the evolving needs of the business.

If you’re a strategic leader with deep technical expertise and a passion for operational excellence, this role offers the opportunity to make a measurable impact on energy performance, safety, and long‑term cost reduction.

What You’ll Do

Energy Management Leadership

• Lead all Energy Management System (EMS) programs for stores, facilities, and corporate locations from design through installation.
• Develop and implement energy‑reduction plans that drive efficiency across facilities and construction projects.
• Recommend policies and strategies focused on energy conservation and long‑term cost savings.
• Provide accurate cost estimates, ROI assessments, and supporting documentation for energy initiatives.
• Manage Electricians, Refrigeration Engineers, and outside vendors to support program execution.
• Coordinate with utility companies to maximize rebate opportunities tied to energy‑efficient installations.
• Use tools such as FacilityIQ or other utility‑based platforms to track, document, and analyze energy usage.

Electrical Construction Management

• Oversee all electrical components of construction projects from design through completion.
• Initiate, evaluate, and prioritize work requests; develop and maintain project schedules.
• Supervise and coordinate team members assigned to electrical projects.
• Prepare scopes of work, proposals, schedules, and negotiate vendor and contractor costs.
• Conduct pre‑bid walk‑throughs and participate in construction and maintenance meetings.
• Inspect work quality, enforce material specifications, and certify completed installations.

Lighting Programs & Technology

• Lead lighting retrofit, replacement, and maintenance programs from initial design through installation.
• Prepare detailed scopes of work and cost estimates for lighting controls and upgrades.
• Review competitive bids, negotiate costs, and award projects.
• Stay current on lighting technology, best practices, and local code requirements.

Document Control & Technical Specifications

• Oversee all electrical construction documents including design, plan check, bidding, and final construction stages.
• Generate punch lists and manage project closeout activities.
• Review and verify As‑Built documentation for accuracy.
• Prepare and update electrical specifications to align with company standards and project needs.

Leadership, Operations & Fiscal Management

• Serve as a servant leader by fostering a positive, growth‑oriented environment for team members.
• Develop departmental plans, including budget, staffing, and operational priorities.
• Hire, evaluate, and recognize team member performance, while ensuring accountability and results.
• Encourage innovation, continuous learning, and opportunities for employee development.
• Manage departmental staffing levels, budgets, and financial goals.

Safety & Compliance

• Ensure full team compliance with OSHA, NFPA, NECA, and all applicable safety regulations.
• Conduct regular safety meetings and maintain a strong safety culture.

What You Bring

Education & Experience

• High school diploma or GED required.
• 10+ years of experience in the grocery electrical or related trade fields, including 2+ years of supervisory experience.
• Associate degree, trade school certification, or formal apprenticeship preferred.
• Grocery or multi‑site industry experience strongly preferred.
• Or an equivalent combination of education, training, and experience.

Knowledge & Expertise

• Deep expertise in building trades and electrical codes.
• Advanced understanding of department operations, contracts, policies, and specialized systems.
• Knowledge of state, local, and federal regulations related to electrical and construction work.
• Familiarity with administrative job costing and bookkeeping practices.

Skills & Strengths

• Ability to track work orders, generate accurate project estimates, and manage complex workloads.
• Strong communication skills, both verbal and written.
• Ability to lead project teams and support collaborative problem‑solving.
• Exceptional multitasking ability in a fast‑paced environment.
• Strong planning, analytical, and organizational skills with attention to detail.
• Ability to apply broad technical and professional knowledge to drive independent judgment and sound decision‑making.

Certifications

• Forklift Certification
• Scissor‑Lift Certification
• NFPA 70E Certification

Physical Demands

You may occasionally experience:

• Extended sitting while in office or vehicle
• Frequent driving for site visits
• Viewing technical drawings and computer screens
• Climbing ladders or stairs, bending in tight spaces such as catwalks
• Reviewing specifications and construction plans

Work Environment

This role operates in both an office environment and at active retail construction or maintenance sites.

Regular travel to locations, including long drives and on‑site inspections, is required.

The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of personnel so classified.

• 
  
• Assembling and wiring completely aircraft electrical, radio, and radar units such as main junction and terminal boxes, main engine disconnect plug, main control, switch panels, radio panels, and instrument panels
  
• Completing hookup of wiring, flexes, and cables, and troubleshooting electrical and radio assemblies having multiple interconnected units and accessories
  
• Forming and running harnesses, breaking out and terminating wiring to terminal points where wire routing and location of electrical units and accessories are established by jig board layouts
  
• Making continuity checks (including necessary operation) of above assemblies and harnesses as required, and selling same to inspection
  
• Fabricating completely hi-voltage radio and radar cables that require the soldering of multiple wires, shields, tubes, connectors, pins, washers, spacers, and cores
  

• Inspect electrical construction work associated with aeronautical lighting systems, 5kV systems, electrical substations/regulators, high-tension systems, Fiber Optic communication infrastructure, fire alarm systems, and other electrical-based work.
• Review plans and specifications for constructability and compliance with codes and contract requirements.
• Prepare detailed inspection reports, daily narratives, controlled inspection reports, and time/material documentation.
• Identify potential extra work issues and provide estimates, sketches, and supporting documentation.
• Review contractor payment requests and recommend reasonableness to the Resident Engineer.
• Ensure contractor compliance with MWBE participation, certified payrolls, and other regulatory reporting.
• Maintain accurate project records, databases, and filing systems.
• Coordinate inspections, meetings, and follow-ups with contractors and internal staff.
• Enforce safety compliance including LOTO, fall protection, trench excavation, confined space, and permit-required confined space OSHA regulations.

• Bachelor's degree in electrical engineering.
• Minimum of 10 years' experience inspecting electrical construction work, with projects ranging from $500K to $5M+ in size and varying complexity.
• Valid Driver's License required.
• Ability to obtain high-level security clearance such as SWAC, SIDA at Airports, or TWIC at Ports.
• Night and weekend shifts required.
• Completion of 30-hour OSHA Construction Safety Training.
• Relevant Electrical Licenses/Certifications: NJ DCA Electrical Inspector License, NICET Certifications - Electrical Power Tests and Fire Alarm Systems Level III or higher.

• Strong knowledge of electrical construction methods, safety standards, and inspection procedures.
• Excellent oral and written communication skills.
• Ability to read plans, specifications, and contract documents.
• Strong attention to detail with excellent organizational skills.
• Ability to work independently and exercise professional judgment in task execution.
• Experience with large-scale, complex construction projects preferred.

• 401(k) with employer matching
• Health, dental, and life insurance
• Long-term disability (LTD) and accidental death & dismemberment (AD&D)
• Paid time off and holidays
• Professional development assistance

Electrical Industrial Automation Engineer

Howard Industries is the nation’s leading manufacturer of distribution transformers, with over 10 million overhead, single-phase and three-phase pad mounted, and network transformers in service throughout the United States and abroad. As Mississippi's largest privately held employer headquartered within the state, the company employs over 4,000 team members, generates over $1 billion in revenue, and consists of 4 main corporate divisions: Howard Power Solutions, Howard Lighting, Howard Transportation, and Howard Technology Solutions.

Job Description:

We are seeking a highly skilled Electrical Industrial Automation Engineer to design, develop, and integrate electrical equipment and systems for a wide range of industrial and engineering applications. This role involves working with power systems, instrumentation, computer-based control systems, and high-power/high-voltage testing systems. The ideal candidate will have a strong background in electrical engineering, automation, and system integration to optimize industrial processes and ensure high performance, reliability, and safety.

Key Responsibilities:

• Design, develop, and implement electrical and automation systems for industrial applications.
• Integrate power systems, instrumentation, and computer-based control systems to optimize performance and efficiency.
• Develop and modify electrical schematics, wiring diagrams, and control panel layouts.
• Configure and program PLCs (Programmable Logic Controllers), industrial PCs, I/O systems, and other industrial control devices.
• Conduct high-power/high-voltage testing and troubleshooting of electrical systems.
• Perform system analysis, testing, and validation to ensure compliance with safety and regulatory standards.
• Collaborate with cross-functional teams, including mechanical engineers, software engineers, and project managers, to ensure seamless integration of automation solutions.
• Support commissioning, startup, and maintenance of electrical automation systems in manufacturing facilities.
• Stay updated on emerging technologies and industry best practices to enhance system performance and reliability.

Qualifications:

• Bachelor's degree in Electrical Engineering from a four-year accredited program.
• 3+ years of experience in industrial automation, electrical system design, or a related field (preferred).
• Proficiency in designing and programming industrial control systems incorporating PLCs, HMIs, PCs, and industrial communication protocols.
• Experience with power distribution, motor control, and variable frequency drives (VFDs).
• Familiarity with high-power/high-voltage testing and electrical safety standards.
• Strong analytical and problem-solving skills with the ability to troubleshoot and resolve complex electrical issues.
• Excellent communication and teamwork skills, with the ability to work independently or collaboratively.
• Willingness to travel to manufacturing facilities as needed for system installation, commissioning, and support.

Preferred Skills (Optional):

• Experience with robotics and motion control systems.
• Knowledge of industrial networking and communication protocols (Ethernet/IP, Modbus, PROFIBUS, etc.).
• Familiarity with industry standards such as IEEE, NEC, NFPA 70E, and IEC.

If you are a motivated Electrical Industrial Automation Engineer looking for a challenging and rewarding opportunity, we encourage you to apply and be part of our innovative team!

Job Title: Electrical Superintendent – Commercial Construction

Location: Fort Myers/Cape Coral area

Overview

We are seeking an experienced Electrical Superintendent to oversee the planning, coordination, and installation of electrical systems on new and existing commercial construction projects. This role is responsible for ensuring work is executed safely, efficiently, and in full compliance with contract documents, codes, and company standards. The ideal candidate is a strong field leader with deep electrical expertise, sound judgment, and the ability to manage crews and jobsite operations effectively.

Key Responsibilities

The Electrical Superintendent plans and assigns daily work activities based on workforce capabilities and project needs. This position orders materials and tools, schedules major deliveries, and attends jobsite meetings to coordinate with project stakeholders. The superintendent supervises electrical installations to verify compliance with drawings, specifications, and applicable codes.

Responsibilities also include calling for inspections, accompanying inspectors during walkthroughs, and documenting any violations or deficiencies. The superintendent notifies the general contractor or appropriate administrators of any code violations, omissions, conflicts, or deviations identified in the installation documents.

This role enforces all company safety programs, including safety, drug-free workplace, and hazardous communication requirements. The Electrical Superintendent works closely with manufacturers, owner representatives, and owners to ensure proper installation and system performance. Understanding employee strengths and placing individuals in the most appropriate tasks is a key part of this role.

Qualifications

Candidates must possess a Journeyman or Master Electrician license and have completed a minimum of four years of formal training through an approved apprenticeship program. A minimum of eight years of field experience in commercial electrical construction is required, along with prior supervisory experience.

Required certifications include OSHA 10-hour training, First Aid and CPR, and Hilti or Cadweld certification. Candidates must have strong leadership and interpersonal skills, with the ability to work effectively across all trades and levels within a jobsite environment.

Applicants must be knowledgeable in the operation of electrical tools and equipment, including conduit benders, lifts, cable tuggers, KO sets, trenchers, backhoes, cranes, generators, and related equipment. The ability to read and interpret drawings, specifications, wiring diagrams, and contract documents is essential. Candidates must also be able to identify potential price changes, produce clear sketches, and communicate technical information effectively to field personnel. A valid driver’s license is required.

Education and Experience

A minimum of four years of experience working on commercial electrical projects is required, along with demonstrated supervisory experience.

Skills and Abilities

The Electrical Superintendent must demonstrate strong organizational skills, be self-motivated, and capable of managing multiple responsibilities in a fast-paced environment. Basic mathematical skills and sound reasoning abilities are required to support daily decision-making and problem-solving.

Physical Requirements

This position requires the ability to work in active construction environments, including climbing ladders and scaffolding, working at heights, lifting and carrying up to 50 pounds, bending, crouching, crawling, and working overhead for extended periods. Normal vision and hearing are required, with or without corrective devices.

Work Environment

The role is performed in active construction jobsite environments that may include noise, debris, uneven surfaces, and potential safety hazards such as trenches and openings. Employees must remain alert and adhere to all safety protocols at all times.

Equal Employment Opportunity

Meisner Electric, Inc. is an Equal Opportunity Employer and a Drug-Free Workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability, veteran status, or any other protected characteristic

Seniority Level

Mid-Senior level

Industry

Construction

Employment Type

Full-time

Job Functions

ManagementStrategy/PlanningProject Management

Skills

TrainingConstructionCommercial ConstructionSupervisory SkillsMechanical, Electrical, and Plumbing (MEP)Problem SolvingOSHA ComplianceElectrical Conduits

Job Title: Electrical QA Inspector – Semiconductor Manufacturing (Fab Project)

Location: Manassas, VA

Project: Large-Scale Semiconductor Manufacturing Facility

About the Project

We are supporting a major semiconductor manufacturing expansion in Manassas, contributing to one of the most advanced fabrication (fab) environments in the United States. This high-profile project involves complex electrical systems, cleanroom infrastructure, and mission-critical power distribution systems essential to semiconductor production.

Position Summary

We are seeking an experienced Electrical QA Inspector with semiconductor or high-tech manufacturing experience to support a large-scale fab construction project. This role is responsible for ensuring all electrical installations meet project specifications, NEC requirements, industry standards, and client quality expectations.

The ideal candidate will have experience in mission-critical facilities, cleanroom environments, or semiconductor fabs and a strong understanding of electrical quality control processes in large industrial construction projects.

Key Responsibilities

• Perform quality assurance inspections of electrical installations including:
• Medium- and low-voltage power distribution systems
• Switchgear, transformers, and UPS systems
• Cable tray, conduit, and grounding systems
• Cleanroom electrical systems and specialty equipment feeds
• Verify installation compliance with:
• NEC and applicable codes
• Project drawings and specifications
• ITPs (Inspection & Test Plans)
• Conduct field inspections and document findings through QA reports
• Coordinate with contractors, engineers, and project management teams
• Witness and document testing and commissioning activities
• Track deficiencies, manage punch lists, and verify corrective actions
• Support turnover documentation and system handover processes

Required Qualifications

• 5+ years of electrical QA/QC inspection experience in industrial or mission-critical construction
• Electrical journeyman, Master Electrician, or Electrical Engineer.
• Semiconductor fab, cleanroom, or data center project experience preferred
• Strong knowledge of NEC and electrical construction standards
• Ability to read and interpret electrical drawings and specifications
• Experience with submittal reviews, RFIs, and change documentation
• Strong documentation and reporting skills
• OSHA 10 or 30 certification preferred

About the Company: Innospec Performance Chemicals is looking to add an Electrical, Instrumentation & Controls Technician to the team in Salisbury, NC.

About the Role: The Electrical, Instrumentation & Controls Technician installs, maintains and repairs electrical instrumentation and controls as listed below and maintain cable, heat and exhaust systems in water and wastewater treatment plant as well as manufacturing facilities.

Responsibilities:

• Read, understand and interpret schematics, ladder drawings, technical specifications and manufacture’s manuals related to repair, maintenance and troubleshooting of electrical instrumentation and control equipment.
• Install, maintain, repair and troubleshoot electrical systems including, but not limited to: generators, PLC’s, electric motors, motor controls, flow equipment, alarm and telemetry systems, heating and exhaust systems, conduits, cable and relays.
• Perform preventative maintenance in accordance with established procedures.
• Provide technical guidance to operations and maintenance personnel and provide suggestions to improve service and operations.
• Provide electrical expertise including technical review for in-house modifications, additions and major repairs.
• Contact and work with independent contractors regarding electrical instrumentation and control system repairs and installations.
• Coordinate with Warehouse staff to maintain an inventory of electrical parts and equipment sufficient to perform repairs and complete normal installations.
• Assist in repairs of water and sewer leaks.
• Must be available to work overtime, holidays, weekends, and on-call rotation.
• Other duties may be assigned.

Qualifications:

• This position requires knowledge of installation, maintenance, testing and repair of electrical instrumentation and control equipment and related systems; skill in the techniques of handling tools and equipment used in the electrical trade; and knowledge of safety standards and practices applicable to the repair and maintenance of electrical instrumentation and control equipment and related systems, and to provide corrective measure for resolution of problems.
• The ability to develop work procedures that will provide minimum interference with plant operations.
• The ability to read, interpret and review engineering plans and specifications and to make simple sketches of electrical parts or systems.

Required Skills:

• High School Diploma or equivalent.
• 5+ years of related experience or equivalent education in electrical instrumentation and control system maintenance, installation, and repair.
• Must have pertinent certifications and/or licenses related to job duties.
• Employee is encouraged to continue education through seminars, attend classes, etc. in order to improve knowledge of job-related skills.

Job Type: Full-time

Pay range and compensation package: Starting at $32 per hour (can increase based on experience)

Manager - Electrical Installation Manager

Location: Nationwide Travel Required

Job Type: Direct Hire

Location: Cincinnati, OH; Charlotte, NC; Atlanta, GA

Overview

We are seeking an experienced Electrical Installation Manager to lead electrical field teams delivering complex automation and material handling installations across customer sites nationwide.

This role oversees the electrical installation of conveyor systems, robotics, and warehouse automation equipment, ensuring projects are completed safely, efficiently, and to high quality standards. The position works closely with mechanical installation teams, controls engineers, and project managers to ensure successful project execution.

What You’ll Be Responsible For

• Leading and developing electrical installers, foremen, and subcontractors across multiple projects
• Overseeing electrical installation for conveyor systems, material handling equipment, robotics, and automation systems
• Reviewing electrical drawings, schematics, and installation scope prior to project kickoff
• Ensuring compliance with NEC, OSHA, and customer standards
• Supporting system startup, troubleshooting, and commissioning activities
• Planning labor needs and deploying crews across active installations
• Coordinating work with mechanical installation teams, controls engineers, and project leadership
• Identifying site risks early and implementing corrective actions to maintain schedule and quality

What We’re Looking For

• 10+ years of industrial electrical installation experience within material handling, automation, conveyor systems, or similar environments
• 5+ years leading electrical field teams, foremen, or subcontractors
• Experience installing electrical infrastructure for automation systems, including motor controls, VFDs, sensors, safety systems, and industrial control panels
• Experience coordinating with mechanical installation teams, controls engineers, and project managers on complex installations
• Ability to manage labor planning, crew deployment, and installation schedules across multiple sites

What Success Looks Like

• Safe, high-quality installations with minimal rework
• Projects delivered on schedule with efficient labor utilization
• Strong field leadership and well-developed electrical teams
• Consistent installation standards across projects
• Positive collaboration with engineering, installation, and project teams

Ideal Background

This role is well suited for an experienced electrical leader coming from material handling, warehouse automation, conveyor systems, industrial installation, or large-scale facility buildouts who enjoys leading field teams and delivering complex projects.