K2view Fabric Jobs in Usa
1,447 positions found — Page 3
Machined & Fabricated Buyer is responsible for sourcing, quoting, and purchasing machined and fabricated parts while developing supplier relationships and driving continuous improvement. You will support cost reduction initiatives, evaluate supplier capabilities, and ensure the quality and reliability of critical components used in production.
On Site- Bedford/Lynchburg VA Market
US Persons
This role requires strong mechanical aptitude, the ability to read and interpret engineering drawings, experience in a manufacturing environment, and an interest in long-term strategic procurement work.
Key Responsibilities
- Source, purchase, and negotiate pricing for machined and fabricated components
- Review and interpret engineering drawings, blueprints, and technical specifications
- Obtain, evaluate, and compare supplier quotes and estimates
- Perform cost and labor analysis for machined/fabricated parts
- Work closely with Engineering, Quality, and Production teams to ensure supplier alignment
- Develop supplier relationships and monitor performance on quality, cost, delivery, and capability
- Support make/buy decisions, process improvements, and new product/component launches
- Maintain accurate purchasing data and documentation within ERP systems
- Drive strategic initiatives including cost savings, risk mitigation, and supplier consolidation
- Support sourcing for components involving bearings, motors, and other mechanical assemblies
- Work fully onsite in Lynchburg to collaborate with cross-functional manufacturing teams
Required Qualifications
- Bachelor’s degree in Business (required)
- 3+ years of purchasing and/or sourcing experience in a manufacturing environment
- Ability to read and interpret technical drawings
- Strong mechanical aptitude; familiarity with machining or fabrication processes
- Proficiency in Microsoft Office (Excel, Word, Outlook)
- APICS or Supply Chain Management certification preferred
- Strong communication, negotiation, and supplier management skills
- Must be authorized to work in the U.S. and work onsite in Lynchburg, VA
Preferred Background (Highly Attractive)
- Prior machinist, tool & die, or machine shop experience
- Background in estimating or quoting machined parts
- Experience with bearings, motors, and mechanical components
- Technical buyer, estimator, or strategic sourcing specialist experience
- Understanding of manufacturing workflows, tolerances, and machining terminology
Why This Role Attracts Strong Lynchburg Manufacturing Talent
- Hands-on collaboration with engineering and production
- Opportunity to step into strategic sourcing, not just transactional buying
- Work with complex machined and fabricated components
- Ability to influence supplier selection, cost, and quality
- Growth path into senior strategic sourcing roles
Equal Opportunity Employer/Veterans/Disabled
Benefit offerings include medical, dental, vision, term life insurance, short-term disability insurance, additional voluntary benefits, commuter benefits and 401K plan. Our program provides employees the flexibility to choose the type of coverage that meets their individual needs. Available paid leave may include Paid Sick Leave, where required by law; any other paid leave required by Federal, State or local law; and Holiday pay upon meeting eligibility criteria. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs which are direct hire to a client
To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records.
Thorough Built LLC, based in Chattanooga, TN, is a leading provider of design, fabrication, and machining services. The company specializes in custom fabrication, CNC plasma cutting, press brake forming, machining, and welding, adhering to AWS and ASME standards. With expertise in material handling, CWI/metallurgy, and comprehensive design services including 3D modeling and reverse engineering, Thorough Built delivers streamlined manufacturing solutions. We pride ourselves on delivering high-quality, innovative technical solutions tailored to industrial and custom applications. Our facilities include advanced equipment and a dedicated team, making us a trusted partner for large-scale structural fabrication projects.
The Structural Steel Fabricator role at Thorough Built LLC is a full-time, on-site position located in Chattanooga, TN. The individual in this role will be responsible for fabricating structural steel components by interpreting blueprints and technical drawings, using metalworking machinery, operating hand and power tools, and performing welding, grinding, and cutting tasks. Additional responsibilities include ensuring quality control, adhering to safety standards, and assisting in material handling and equipment operations, such as forklift usage.
- Proficiency in metalworking, including cutting, shaping, and assembling structural steel components.
- Skilled in the use of hand tools and power tools for welding, grinding, and other related tasks.
- Experienced in operating grinding equipment and power tools safely and effectively.
- Ability to operate forklifts and other material handling equipment in compliance with safety guidelines.
- Strong understanding of reading blueprints, technical drawings, and specifications to execute projects accurately.
- Prior experience working in a fabrication or manufacturing environment is an advantage.
- Knowledge of safety procedures and commitment to maintaining a clean and organized work environment.
is an established post tension and rebar manufacturing company that has been in business for over 30 years.
We supply construction related materials to builders from one of our nine facilities in the US.
The Rebar Project Manager / Detailer is responsible for producing accurate rebar detailing and fabrication documents while simultaneously managing all project deliverables for concrete reinforcing steel projects.
This role oversees projects from award through closeout, ensuring rebar is detailed, fabricated, delivered, and installed in accordance with structural specifications, schedules, budgets, and quality standards.
The ideal candidate combines strong technical proficiency in AutoCAD and RebarCAD with hands-on project management experience in concrete reinforcing operations.
Responsibilities Manage all project deliverables from pre-constructions through closeout Develop and maintain project schedules Manage cost control, supply and administration of various size Concrete reinforcing projects to our Customers.
This will include the use of associated industry standard technologies such as Autocad and Rebarcad for the detailing and fabrication of rebar per structural specifications.
Identify risks and proactively resolve issues related to scope, schedule, constructability or field coordination service delays or bottlenecks Utilize tools provided to detail smaller less than 50 Ton projects in house.
Import orders into our Electronic Operating System and co-ordination of fabrication and delivery requirements, based on Approved Rebar shop drawings, as specified by our Customer.
Review and highlight cost saving opportunities for the company by familiarizing yourself with project specific contract documentation.
The ability to analyze, cost, order and coordinate these opportunities with Operations Dept.
is critical.
Provide excellent Customer Service as required to facilitate the Project Management role on a daily basis to achieve best results for the company.
Prepare and cost small estimates for smaller sized projects and supply project weights/requirements to Sales department for preparation of quotes.
Coordination and cost control of specialized vendor products including checking and approval of associated vendor invoices.
Ensure compliance with safety, quality and contractual requirements Qualifications Education: Bachelor’s degree or equivalent hands-on experience Required background: Requires 5 years minimum experience in rebar Project Management Successful candidate will be familiar with ACI 318 concrete reinforcing standards Requires 10 years minimum Detailing experience using industry standard programs such as Autocad and Rebarcad Experience in programs such as On-Screen Takeoff, Excel, I SqFt etc.
or similar preferred Knowledge Skills & Abilities: Strong problem-solving skills Excellent verbal and written communication skills Previous personnel management experience would be an advantage however not necessarily required Ability to recognize and provide solutions to customer related Construction issues in the field using accepted industry based products Sound knowledge of basic mathematical principles is a must Experience with Lumpsum job reconciliations and dispute resolution Ability to manage workload with changing priorities while achieving project deadlines Exceptional attention to detail and organizational abilities Physical Requirements: Must occasionally lift and/or move up to 50-75 pounds Frequently required to sit or stand for long periods of time and walk distances, as well as stoop, bend, kneel and crouch Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus While performing the duties of this job, the employee is regularly required to talk or hear Frequently required to use hands and fingers to handle, reach or feel and manipulate objects or controls Must be able to work in fumes and odors.
(non-hazardous) Must be able to work in loud areas and wear hearing protection Must be able to work with oils, grease and dust, with limited personal protection (aprons, gloves, etc.) Additional Information Salary Range: $100,000+ DOE Actual salary will be based on a variety of factors including relevant internal and external experience, knowledge, skills, scope of job, geographical location or other factors permitted by law Benefits: 401(k) + matching Health, Dental, Vision insurance Life insurance Paid time off (PTO) Holiday Pay Suncoast Post-Tension is an Equal Opportunity Employer.
We encourage qualified women, minorities, veterans, individuals with disabilities, and others to apply.
#Keller1 #LI-LK
Position: Precision Tool and Die Fabricator
Company: Chicago Metallic
Location: 1502 N Central Avenue About Us
Bundy Baking Solutions is a global family business with a rich legacy rooted in genuine care for everyone connected with the organization. Founded by Russ Bundy 60 years ago, the company started by selling baking pans from the trunk of his car and has since grown into an international leader in baking solutions. Its extensive reach encompasses designing, manufacturing, coating, and distributing high-quality bakery equipment and supplies. Today, Bundy Baking Solutions operates worldwide, employing nearly 2,000 people across 11 countries and multiple business units and manufacturing facilities.
We plan to offer a competitive salary, a great benefits package, a genuine company culture, and the rewarding opportunity to have a significant impact on a global family business. Speaking of culture, be sure to check out the CREED section of our careers page:
Bundy Baking Solutions is the world's leading manufacturer of baking equipment custom and stock baking pans and pan coatings. Built with extensive hands-on knowledge of the baking industry and its operations, Bundy has a legendary reputation for both quality and innovation.
Position SummarySet up and operate machine tools. Fit and assemble parts to make or repair metal stamping dies, applying knowledge of mechanics, shop mathematics, metal properties, and machining procedures. Study specifications, such as blueprints, sketch, or description of part to be made, and plan sequence of operations. Primary Duties and Responsibilities include the following:- Studies sample parts, blueprints, drawings, and engineering information to determine methods and sequence of operations to fabricate product
- Operates metalworking machine tools, such as lathe, milling machine, drill, or grinder to machine parts to specifications
- Assembles parts into completed units using jigs, fixtures, hand tools, and power tools
- Fabricates, assembles, and modifies tooling, such as jigs, fixtures, templates, and molds or dies to produce parts and assemblies
- Verifies dimensions of parts, using precision measuring and marking instruments and knowledge of trigonometry within .0005
- Calculates and sets controls to regulate machining, or enters commands to retrieve, input, or edit computerized machine control media
- Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials onto machines
- Measures, examines, and tests completed units to detect defects and ensure conformance to specifications
- Dismantles machines, dies, or equipment, using hand tools and power tools, to examine parts for defect or to remove defective parts
- Cleans, lubricates, and maintains machines, tools, and equipment to remove grease, rust, stains, and foreign matter
- Confers with engineering, supervisory, and manufacturing personnel to exchange technical information
- Designs fixtures, tooling, and experimental parts to meet special engineering needs
- Knowledge of various machines such as cutting tools, lathes, milling machine, shaper, grinder
- Knowledge of powered tools
- Ability to read blueprints
- Ability to measure, mark and organize metal stock for machining
- The ability to exert maximum muscle force to lift, push, pull, or carry objects weighing 50 pounds
- The ability to choose quickly and correctly between two or more movements in response to two or more signals (lights, sounds, pictures, etc.). It includes the speed with which the correct response is started with the hand, foot, or other body parts
- The ability to quickly respond (with the hand, finger, or foot) to one signal (sound, light, picture, etc.) when it appears
- The ability to time the adjustments of a movement or equipment control in anticipation of changes in the speed and/or direction of a continuously moving object or scene
- The ability to communicate information and ideas in writing so others will understand
- The ability to remember information such as words, numbers, pictures, and procedures
- The ability to quickly and repeatedly bend, stretch, twist, or reach out with the body, arms, and/or legs
#IND123
PIbefd11991366-26289-39921649
Now Hiring General Laborers & Fabricators
Training wage is $24.67!
2nd Shift starting at $26.47!Weekend Shift starting at $27.97!
Flexibility to be Hired for Either 2nd or Weekend Shift
Shifts Available:
- 2nd Shift: Mondays - Thursdays, 3:45pm - 3:30am; Fridays, 3:45pm - 8:45pm
- Weekend Shift: Fridays - Sundays; 5:00am - 5:00pm
- 2nd Shift: Hours Over 40 Paid at Time and a Half
- Weekend Shift: Hours Over 36 Paid at Time and a Half
- All Shifts: Hours Over 50 Paid at Double Time
At Veritas Steel, were leading the way in the bridge fabrication industry and want you to join our team! We look for people who are committed to working safely by performing their job to the best of their ability, as well as people who enjoy fun and hard work. Ready to leave your legacy? Join the Veritas Steel team today!
Advantages of Working Here:
- Weekly Paycheck
- Weekly Attendance Bonus
- Paid Training
- Safety Boot Reimbursement
- Paid Vacation Hours
- Paid Company Holidays
- Medical, Dental, & Vision Insurance
- Pension Program
A Day in the Life: As a General Laborer/Fabricator employed at Veritas Steel's Wausau location, you are responsible for grinding, drilling, shop clean-up, and miscellaneous tasks. You can meet production demands promptly and complete high-quality work.
Your Skills Include:
- High School diploma or GED
- Great attendance to learn and grow your skills
- Commitment to the attendance policy and procedures
- Commitment to work safety and actively participating in our safety culture
- Quality, accuracy, thoroughness, and reliability of work performed
Your Day Includes:
- Operating hand and power tools, such as grinders and sanders
- Assisting with setup and operation of equipment necessary to fabricate material as required by job specifications
- Maintaining a clean and organized work environment, including the proper storage and disposal of materials
- Using proper safety equipment to ensure surfaces are adequately prepared for all operations
- Coordinating with shop supervisor and other personnel to complete work orders efficiently, on time, and with top-notch quality
- Performing other tasks as assigned by the supervisor
Your Physical Abilities:
- Able to lift 40 lbs. and carry 30 lbs.
- Must be able to push /move objects up to 50 lbs. of force
- Pulling requirements up to 122 lbs. of force
- Necessary to stand, walk, stoop, and kneel
- Must have a good range of motion when reaching forward, shoulder to overhead, and bending
- Agile fingers and thumbs on both hands
Your Environment:
- Work performed indoors in a large warehouse or outside in all weather conditions
- Regular exposure to dirt, dust, paint fumes, noise, moving equipment, heavy steel, and other possible hazardous conditions
- Safety glasses, hearing protection, hard hats, and steel-toed boots are required
Veritas Steel is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.
Compensation details: 24.67-27.97 Hourly Wage
PIe9eb53198b7d-26289-39854707
2026-03-04
Country:
United States of America
Location:
US-CT-WINDSOR LOCKS-B1A 1 Hamilton Rd BLDG 1A
Position Role Type:
Onsite
U.S. Citizen, U.S. Person, or Immigration Status Requirements:
U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.
Security Clearance Type:
None/Not Required
Security Clearance Status:
Not Required
Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology.
Plan, set-up, and perform a variety of processes to maintain the flow of work to manufacture heat exchangers, water separators and other environmental control system components while practicing and complying with environmental health and safety directions and procedures.
What You Will Do:
- Plan, set-up, prepare and perform fabrication, assembly, test and associated precision fabrication processes.
- Plan, set-up and operate a variety of tools and equipment such as power presses, band saws, belt sanders, expanders, and power shears to cut, form, trim, fit, roll, bend, drill and saw material to fabricate detail parts following established methods and procedures.
- Plan, set-up, and perform resistance spot welding and salt braze processes.
- Operate a variety of conventional and CNC/NC equipment to perform milling, drilling and turning operations to established methods and procedures.
- Plan, set-up, edit programs, and operate various presses and lasers to cut and form details.
- Plan, set-up, and perform pressure, leakage and functional tests.
- Plan, set-up and operate furnaces for processes such as drying, annealing, aging and curing product.
- Receive, unload, check, record, prepare, inventory, store, disburse, and deliver a variety of materials, products and equipment.
- Maintain rough stores, cribs, gage cabinets, and point of use storage areas. Order, organize, and store such items as supplies, materials, chemicals and tools.
- Safety wire, prepare product, make and apply nameplates and package for shipment.
- Fabricate and repair containers.
- Participate in review, analysis and ordering of purchased parts and materials to ensure appropriate inventory levels. Communicate with suppliers on delivery and quality concerns.
- Review open purchasing and shop part requirements. Review regularly with internal suppliers and purchasing. Coordinate and expedite deliveries as required.
- Perform visual, dimensional and functional inspection using variable measuring instruments such as micrometers, verniers and checking fixtures.
- Mix and apply bonding agents, coatings and chemicals.
- Check calibration of gages, instruments and equipment in accordance with established procedures. Record and document as required.
- Prepare test pieces and micros using equipment such as grinders, cutters, sanders, polishers and mounting presses.
- Sharpen or modify tools, make up simple forming dies, tooling and templates.
- Perform periodic maintenance such as cleaning and lubricating fixtures and equipment, adding fluids, charging filters and tightening hardware.
- Participate in audits of processes, procedure and work areas.
- Use computers and office equipment to record and process transactions.
- Utilize and maintain all necessary documentation such as logs, reports, charts, sampling plans, statistical process control records and nonconformance documents.
- Instruct one or two fellow employees in proper performance of duties.
- Utilize statistical methods to monitor process control and capability. Use data to investigate areas for potential process improvement.
- Improve processes and solve problems in cooperation with fellow employees and technical support.
- Move parts and materials to designated locations in accordance with material flow procedures, and initiate follow-up lists.
- Keep equipment and surroundings neat, clean and organized.
- Perform related duties as required within the scope of this job function.
- 3rd Shift: 12am to 7am, Monday to Friday.
- Training may take place on 1st, 2nd Shift, or 3rd Shift for up to 3 months.
Qualifications You Must Have:
- Must have a high school diploma or GED.
- 1-2 years of experience in quality control and inspection processes.
- Prior use of air tools and fixtures to set-up parts for welding and understanding of location gages such vernier calipers and depth micrometers.
Qualifications We Prefer:
- Sheet metal working skills such as grinding, bending, cut-off tools, polishing, deburring.
- Experience completing pressure test, assembly of Heli coils, riveting, and spot welding.
- 5-7 years of relevant experience in quality control and inspection processes.
- Familiarity with statistical process control (SPC) and other quality assurance methodologies.
- Experience with the use of precision measuring instruments and inspection equipment.
What We Offer:
Some of our competitive benefits package includes:
- Medical, dental, and vision insurance
- Generous 401(k) plan that includes employer matching funds
- Collins provides eligible employees with paid time off
- Tuition reimbursement program
- Student Loan Repayment Program
- Life insurance and disability coverage
- Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection
- Birth, adoption, parental leave benefits
- Ovia Health, fertility, and family planning
- Adoption Assistance
- Autism Benefit
- Employee Assistance Plan, including up to 10 free counseling sessions
- Healthy You Incentives, wellness rewards program
- Doctor on Demand, virtual doctor visits
- Bright Horizons, child and elder care services
- Teladoc Medical Experts, second opinion program
- And more!
Learn More & Apply Now!
We make modern flight possible for millions of travelers and our military every second. Our major product lines are on-board virtually every aircraft flying. Be it keeping passengers safe with our emergency power generation systems or creating a positive in-flight experience through reliable cabin pressure controls and quieter engines, Power & Controls focuses on delivering a best-in-class experience to our customers. We hire the top people in the industry. Their ideas drive our performance, and their integrity keeps our customers happy. Join us as we take flight!
*Please ensure the role type (defined below) is appropriate for your needs before applying to this role.
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
The salary range for this role $35.40 - $44.47 per hour; however, Raytheon Technologies considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, education/training, and key skills.
At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again.
Apply now and be part of the team that's redefining aerospace, every day.
#TopOpps
#P&CPM
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.
This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
*This role is currently based in Commerce, CA.
Cross Brothers Manufacturing
Company Overview
Cross Brothers Manufacturing is a rapidly growing fabrication and electrical infrastructure manufacturing company serving utilities, OEMs, and electrical contractors across the Western United States. The company is a portfolio investment of TBG Equity, a private investment firm focused on building and scaling industrial and infrastructure manufacturing businesses.
Our products support the expansion of the electrical grid and industrial infrastructure, including utility structures, enclosures, and custom fabricated components.
Demand for our products is increasing as electrification, AI infrastructure, and data center growth drive massive expansion of the electrical grid.
We encourage candidates who enjoy solving operational problems and building systems in fast-growing environments to apply.
Benefits & Perks
· Fully paid medical benefits
· 401k matching
· Generous Paid Time Off and Holidays
Compensation & Growth Path
· Base salary expected to be in the range of $100,000 – $130,000, depending on experience.
· This role is also eligible for performance bonuses tied to operational improvements and company growth.
· Cross Brothers leadership participates in a shared bonus pool tied to company performance, which this role will have the opportunity to join as responsibilities expand.
· As the company grows, this position is expected to evolve into Director of Operations, with responsibility for broader operational leadership.
· Top performers may also have the opportunity to participate in long-term incentive programs, including potential equity participation, as the company scales.
About the Position – Operations & Systems Manager
Cross Brothers is entering a rapid growth phase as demand for electrical infrastructure equipment accelerates across the United States.
The company is currently expanding production capacity, launching a second shift, and preparing for a facility relocation to support continued growth.
This role offers a rare opportunity to help build the operational foundation of a growing manufacturing platform, working directly with leadership to improve manufacturing systems, implement new technology, and scale production capacity.
The successful candidate will play a key role in helping the company evolve from a traditional fabrication shop into a modern, data-driven manufacturing organization while working closely with leadership to shape how the business scales operationally.
Role Mission
The Operations & Systems Manager will help transform Cross Brothers from a traditional fabrication shop into a scalable, data-driven manufacturing platform.
This role will work directly with the CEO and leadership team to build operational systems, improve shop-floor processes, implement automation and AI tools, and support the company’s next phase of growth.
This is a hands-on role inside the factory environment, working closely with production, finance, engineering, and leadership to improve efficiency, throughput, and operational visibility.
Key Responsibilities
Operational Systems
- Implement and refine work order tracking and production systems
- Develop operational dashboards and KPIs
- Track labor efficiency across cutting, bending, welding, and assembly
- Identify production bottlenecks and process improvement opportunities
Manufacturing Process Improvement
- Improve production scheduling and workflow coordination
- Support second shift production ramp
- Reduce rework, delays, and operational waste
- Assist with facility layout and production flow improvements for our upcoming facility move
Technology & Automation
- Evaluate and implement automation and AI tools for operations
- Improve digital workflows across quoting, engineering, and production
- Help modernize internal systems and reporting
Operational Execution
- Support daily shop-floor operations
- Coordinate between engineering, finance, production, and leadership
- Assist leadership in scaling operational capacity as demand grows
Ideal Candidate
We are looking for a highly analytical, hands-on operator who enjoys solving complex operational problems.
Strong candidates may come from backgrounds such as:
· Operations or manufacturing roles
· Industrial engineering
· Operations consulting
· Supply chain optimization
· MBA programs with operations focus
The ideal candidate will be:
· Extremely analytical and systems-oriented
· Comfortable working in a manufacturing environment
· Comfortable working in both the office and on the shop floor
· Curious about technology and AI tools
· Proactive and solutions-driven
· Eager to grow with a fast-scaling company
Location
This role is currently based at our manufacturing facility in Commerce, California.
As the company continues to grow, we expect to relocate to a larger facility within the next 9–12 months, likely in Orange County or the Inland Empire.
Work Schedule
This role works closely with production teams and requires an early start to support daily shop-floor operations.
Typical hours begin around 6:30–7:00 AM.
We are seeking a skilled Fitter to join our dynamic team. The ideal candidate will possess a strong mechanical knowledge and experience in fabrication and welding processes. As a Fitter, you will play a crucial role in assembling and constructing various components, ensuring that all specifications are met according to blueprints and engineering drawings. This position requires attention to detail, adherence to safety protocols, and the ability to work effectively both independently and as part of a team.
*Responsibilities*
* Interpret and read blueprints and engineering drawings to determine specifications and assembly requirements.
* Fabricate components using various machining techniques and tools.
* Perform welding tasks using FCAW (Flux-Cored Arc Welding) and Stick welding methods.
* Build assemblies by fitting parts together with precision, ensuring structural integrity.
* Operate cranes and other lifting equipment safely to move heavy materials as needed.
* Utilize measuring tools such as micrometers to ensure accurate dimensions of components.
* Maintain a clean and organized workspace, adhering to safety regulations at all times.
* Collaborate with team members to troubleshoot issues during the fitting process.
*Skills*
* Strong mechanical knowledge with the ability to understand complex systems.
* Proficient in fabrication techniques, including welding (FCAW and Stick welding).
* Experience with machining processes is preferred.
* Ability to read and interpret blueprints accurately.
* Familiarity with operating cranes and other lifting equipment safely.
* Competent in using measuring instruments like micrometers for precise measurements.
* Excellent problem-solving skills and attention to detail.
* Strong communication skills for effective collaboration within a team environment.
Join us as a Fitter, where your skills will contribute significantly to our projects while you grow professionally in a supportive environment!
Job Type: Full-time
Pay: $20.00 - $24.00 per hour
Benefits:
* 401(k) matching
* Dental insurance
* Health insurance
* Life insurance
* Vision insurance
Experience:
* FCAW: 1 year (Required)
* Stick welding: 1 year (Required)
* Overhead crane: 1 year (Required)
Work Location: In person
Fabrication Welder
Location: 377 Crooked Lane, King of Prussia, PA, 19406, United States
Base Pay: $44,000.00 - $50,000.00 / Year
Employee Type: FT Non-Exempt
Required Degree: High school
Manage Others: No
Description
We are excited to welcome a Welder to our team! From generous benefits, including bonus opportunities and an Employee Stock Ownership Plan (ESOP), to great employee retention, this is a fantastic opportunity to join a thriving organization!
Benefits: Offering a generous benefits package to include Medical, Dental, Vision, 401k, Paid Time Off, Paid Holidays, Flexible Spending, Company paid Life Insurance, Voluntary Life Insurance, and a generous bonus plan.
Job Summary:
Responsible for fitting and welding of steel, aluminum and stainless-steel parts using a MIG process. Also required to perform other miscellaneous tasks, as assigned by his or her supervisor.
Essential Responsibilities:
- Set up welding machines based on the job at hand or using a Welding procedure specification.
- Read and interpret blueprints and/or drawings to determine the specific welding requirements.
- MIG weld steel, aluminum and stainless-steel components based on the specifications of the blueprints and/or drawings.
- Inspect equipment as required to maintain proper function.
- Follow, create, and help maintain Welding Procedure Specifications.
- Operate machinery used in the production process or assist machine operators.
- Assemble items as instructed by superintendent.
- Complete housekeeping duties in assigned area daily and/or when required.
- Follow all company rules and policies.
- Provide a great level of attention to detail and focus on the given task.
- Work with other employees to maximize productivity and efficiency.
- Prepare product for shipment.
- Lift raw materials, final products, and items packed for shipment, manually (up to 70 pounds), or using a hoist.
- Uphold all safety rules, OSHA standards, and quality standards, applicable to the responsibilities above.
Required Skills & Abilities:
- Minimum 3 years demonstrated experience in welding and fabrication using MIG or TIG practices.
- Ability to read tape measure, calipers and angle gauges.
- Ability to read and understand production assembly drawings, blueprints, specifications, and welding symbols.
- Effective oral and written communication.
- Strong Mechanical aptitude.
Education and Experience:
- High School Diploma, GED or equivalent education preferred.
- Good Mathematical skills.
- Knowledge of welding and fabrication of piping and structural steel assemblies.
- Knowledge of machines and tools including their designs and uses.
Physical Requirements:
- Ability to lift, move, and carry materials and equipment up to 70 pounds consistently.
- Must be able to pass clearance for respirator and wear respirator for up to 8 hours per day.
- Ability to stand or walk for up to 12 hours per day.
- Must be able to utilize appropriate Personal Protective Equipment required for each job task (Steel toed shoes, eye protection, hearing protection, gloves, hard hat).
- Be able to operate varied hand and power tools and related equipment.
- Specific vision abilities required include close vision, distance vision, color vision to identify electrical wires and pipes, peripheral vision, depth perception, and the ability to adjust focus.
- Must be able to concentrate on a task over a long period of time without being distracted.
- Finger dexterity to operate above-mentioned tools and equipment.
- Ability to bend, stoop, kneel, reach, and climb to perform work.
- Ability to pass pre-employment drug test.
Compensation details: 44 Yearly Salary
PI0b4339bf3b
Salary: $20-32
Express Employment Professionals Cincinnati Northwest is seeking a Level 3 Welder / Fabricator to fill several immediate 1st shift openings in the Cincinnati area!
Responsibilities:
- Prepare and fabricate metal as needed using various tools
- Weld metal together following blueprint instructions
- Perform quality inspections to ensure accuracy of measurements
- Document work processes
- Maintain a clean and orderly workspace
Qualifications:
- Previous experience as a Welder is required
- Previous experience with MIG Welding is required
- Previous experience with TIG Welding is a plus
- Ability to read blueprints and weld symbols is required
- Strong communication skills
Compensation:$20-32 an hour
#EEPCNW
Express Office: Cincinnati (Northwest)
3551 Springdale Road
Cincinnati, OH 45251
