Jets Comics Jobs in Usa

Whether you're a resident or a returning guest to Sarasota County, you're bound to have had a memorable experience at one of our well-known beaches! Ranked #1 time and time again, the beauty and impact could not be possible without our outstanding team of lifeguards, fit and equipped to ensure our safety and provide necessary updates regarding changes to our beach conditions.

If you are an experienced lifeguard with active CPR/AED certifications and an ability to lead/train others, this is the role you've been looking for! The starting pay rate is $22.14 (Step 1), benefits begin within 60 days of hire, and there are opportunities for advancement. Apply today and help us to keep our beaches a safe and enjoyable environment for guests and residents alike!

As a Senior Lifeguard (Lieutenant), you will supervise the operation of your assigned county-operated beach, patrolling to prevent accidents, performing rescues, administering medical assistance (first aid and CPR), and maintaining order per Sarasota County ordinances. For more information, see below.

• Oversee daily operations of your assigned County-operated beach, including overseeing Lifeguard station operations, supervising Beach Lifeguards, and supervising all activities directed towards saving lives and preventing injury to patrons.
• Work as part of the Lifeguard Operations leadership team to motivate others and support leadership.
• Assist in the development and continued training of Lifeguards.
• Assist Lifeguard Captains in completing Lifeguard performance evaluations by providing input. Promote appropriate employee conduct in a constructive and corrective way. Educate Beach Lifeguards through verbal warnings and issue corrective counseling as necessary; refer higher-level disciplinary actions to Lifeguard Captains.
• Clean the lifeguard office and storage areas daily, and as needed. Maintain inventory of first aid supplies, ordering supplies as needed.
• Complete incident reports, daily operational reports, and statistical record reporting on time and accurately.
• Keep beaches safe by maintaining order and discipline and enforcing County ordinances. Explain and interpret operational and programmatic rules and regulations for patrons; enforce or refer enforcement to proper authorities.
• Rescue swimmers in distress. Administer first aid and/or CPR, Automated External Defibrillator (AED), and oxygen following appropriate medical protocols; call for emergency assistance when necessary.
• Inspect assigned area(s) to ensure proper warning signs and safety devices are properly posted or in place. Assist the public by providing beach condition information, including unsafe or hazardous swimming conditions.
• Operate county-issued equipment, which may include radio, vehicle, boat, and jet ski, and perform preventative equipment maintenance duties, as necessary.
• Participate in training activities. Assist in aquatic programs such as learn-to-swim classes, water safety classes, and special events.
• Assist in public relations, including answering phones, providing customer service, and taking messages.

Work Hours:

• Beach hours are 9:00 a.m. to 5:00 p.m., 7 days a week.
• Lifeguards work 40 hours per week, with overtime and flexible shifts available.

Minimum Qualifications:

• High School Diploma or its equivalent.
• Minimum of two (2) years of open water lifeguard experience.
• Ability to pass the Sarasota County's Basic Lifeguard Performance Test, which includes:
  • mile run (4:00 minute time limit)
  • 500-meter pool swim (10:00 minute time limit)
  • 200-yard beach run with 50-yard swim rescue ( 4:00 minute time limit)
  • 100-yard board rescue (4:00 minute time limit) (those with prior open water experience only)
• Current CPR/AED and Emergency Response certificate.
• Ability to re-qualify for Sarasota County Basic Lifeguard Performance Test, biannually.
• Valid Florida Driver's License at time of hire, or ability to obtain within 30 days of hire.

Preferred Qualifications:

• EMT certification.
• Prior supervisory experience.

Physical Demands:

• Must regularly lift and/or move up to 50 pounds.
• This position works outdoors, and during a red tide, there may be fumes/airborne particles.
• There is also a risk of exposure to bloodborne pathogens.

Special Note: This position works where children regularly congregate, and in accordance with Florida Statutes, applicants must pass a criminal sexual predator and sexual offender background check.

Subject to Passing Substance Screening: This position is subject to passing a pre-employment substance screening. An applicant who fails to pass a required drug screening test shall be disqualified from employment for a period of five years.

Starting Pay: $22.14 (Step 1)

Interviews: Qualified candidates may be invited to complete Sarasota County's Basic Lifeguard Performance Test. Upon successful completion of the Performance Test, candidates may be invited to an in-person interview.

Our interview process could include phone interview(s), Microsoft Teams video interview(s), and/or in-person interview(s).

If you are selected to join our team, please click on this link to review the Required First Day Documents.

1. I-9 Acceptable Documents to show your identity and authorization to work. Use this link to learn more and review the different document options: your position requires a Florida Driver's License, this must be one of your documents. (Your Florida Driver's License can serve as one of your documents listed in link above List B Documents.)

2. U.S. Social Security Card (signed, physical card). This is a requirement of our Payroll Department and failure to provide this document could jeopardize timely compensation. (Your U.S. Social Security Card can serve as one of your documents listed in link above List C Documents.)

Benefits:

• Enjoy great benefits including Health, Dental, Vision, and Life Insurance, Short-Term and Long-Term Disability, Flexible Spending Accounts, Employee Assistance Program (EAP), Florida Retirement System (FRS) and many, many more! Choose one of three great medical plans, including one with a $0 premium option, with completed preventative visits!
• For more information about employee benefits, please click this link or visit for additional information.
• Utilize our award-winning wellness program including free gyms at multiple Sarasota County Government locations.
• Enjoy 11 paid holidays, 3 personal days and 16 paid vacation days in the first year of full-time employment with increasing accrual rates with years of service. (That adds up to a possible 30 days off in your 1st year!)

A different blend of voices prompt better conversations, choices and results for everyone. Sarasota County Many Voices, One Team.

We celebrate and value the experiences, backgrounds, perspectives, talents and strengths that make us different.

Our vision is to attract, develop, retain and engage a talented workforce broadly representative of the citizens and communities we serve. To further value creativity, innovation, collaboration and great customer service internally and externally.

A job applicant with a disability who requires reasonable accommodation to participate in the application/selection process is requested to make known the need for an accommodation to Human Resources or appropriate county staff members. For assistance with the application, please call 941-861-5353.

Sarasota County prohibits discrimination in all services, programs or activities. View the complete (keywords: ADA Compliance).

Sarasota County Government is a Tobacco-Free/Drug-Free Workplace.

• 
  
• Read and interpret blueprints, sketches, drawings, routing instructions, manuals, specifications or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations and setup requirements.
  
• Properly select, align and secure work holding. Must be able to improvise setups using common tooling such as risers, angle plates etc.
  
• Monitor and/or develop speed, feed, depth or angle of cut during machining operations.
  
• Must observe machine operation to predict or detect malfunctions or out of tolerance machining conditions and adjust machine controls /control media as required.
  
• Verify that all machined details meet print and router specifications, using precision measuring instruments and recording data results. Responsible to ensure first piece inspection is completed for multiple piece runs.
  
• Monitor and maintain proper cleanliness of machine and work area on a daily basis.
  

• 
  
• A minimum of two years of trade school, vocational education or apprenticeship
  
• A minimum of three to five years of CNC machining experience
  
• General machining knowledge, shop math, precision measuring instruments, blueprint reading and GD&T
  
• Part and tool probing
  
• Experience with high speed machining preferred (16 - 27k RPM)
  
• Some openings may require specialized experience with particular machining processes or equipment
  
• Experience with Siemens 840D Control software a plus
  

• 
  
• Present a positive attitude
  
• Be able to work well with meeting deadlines
  
• Have a good work ethic and attendance
  
• Have the ability to communicate well with peers, engineers and leadership
  

This off-shift position is located within our Plant 10 Whitehall Casting Operation and will direct and motivate the manufacturing work force to produce products of high quality in the most efficient and safe manner and ensure that scheduling meets business and customer needs.

Responsibilities

• Supervises an effective team; includes planning and holding meetings, preparing and conducting performance appraisals as appropriate, managing staffing levels (including vacations, overtime, and leaves of absences), assisting with career development (motivates, coaches, and trains to acquire maximum quality, productivity, morale, and cooperation), approving time and attendance, and prioritizing and making work assignments.
• Provides effective feedback to employees, both positive and negative. Maintains appropriate documentation for all disciplinary actions taken.
• Provides training and mentoring to new Supervisors.
• Directs training and orientation of employees to ensure EHS rules are known and understood, to improve work performance, and acquaint employees with company policies and procedures.
• Maintains compliance with the collective bargaining agreement. Interfaces between management and union officials. Handles grievances.
• Ensures compliance with company policies, procedures, and practices.
• Schedules production and work teams.
• Reviews production and operating reports and resolves operations, manufacturing, and maintenance problems to ensure minimum costs and prevent operational delays.
• Promotes EHS and continuous improvement initiatives and culture.
• Implements ABS principles and initiatives and is the 6S program leader.
• Interacts with their employees and other departments in order to manage the flow of product through the operation.
• Maintains inventories, as applicable.
• Creates a total awareness among assigned employees of Company policies, regulations, procedures, and business initiatives. Enforces compliance and acts as a positive resource for information and questions.
• Responds to emergencies. Assists in troubleshooting production problems. Investigates and analyzes. Initiates or recommends actions to correct deviations and variables affecting schedules, costs, quality, and other factors.
• Prepares and analyzes documentation as required (i.e. production reports, log sheets, etc).
• Reviews work procedures for safety regulations and concerns.
• Plans, develops, and implements new methods and procedures designed to improve operations, minimize operating costs, and effect greater utilization of labor and materials.
• Confers with management, engineering, and quality control personnel to resolve maintenance problems and recommend measures to improve operations and conditions of machines and equipment.
• Performs audits for safety compliance; facilitates the 6S audit program.
• Assists with budget and goal setting of the operation.
• Complies with all EHS rules required for the work environment.
• Performs other duties, as assigned.

Job Roles

• Anticipation--asks questions to understand needs of multiple stakeholder groups; prepares operation for optimal execution; contributes as a strategic partner to planning process
• Reliability--leads by example; provides goal and measurement information to others; facilitates safe environment; works effectively within parameters of bargaining unit contract
• Optimizer--improves processes; executes production for maximal output; eliminates waste; increases quality; aligns activity and resources to desired outcomes; sets others up for success
• Facilitator--interacts with internal and external stakeholders at multiple levels; furnishes accurate instructions to others; acts as liaison between planning, management and execution elements of the business
• Responsiveness--deals effectively with the unforeseen; modifies labor schedule or other variables as needed based on circumstances
• Influence-- delegates effectively; capable of explaining the why behind a recommendation or directive; advocates for the business; maintains approachability; deals with conflict and change effectively
• Organization and structure--plans daily; coordinates to deliver on time; ensures efficiencies while balancing priorities of multiple projects and stakeholder groups; has contingency plans
• Observation--sees and hears through the lens of performance; enables accuracy in scheduling, quality in production and relationship with customers; makes recommendations and changes based on patterns and data; monitors for feedback and communicates findings; sees physical and personnel issues and acts on observations; has a finger on the pulse of what occurs within the plant
• Ownership--accepts accountability for the performance of others and the business; inspires ownership and improvement in others; invites measurement

Basic Qualifications:

• High School Diploma or GED from an accredited institution
• Minimum of 3 years leadership experience
• Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.

Preferred Qualifications

• Experience supervising in a manufacturing environment
• Experience with TPM, Synchronous Mfg., and Kaizen Concepts
• Must be able to communicate effectively with all levels of the organization, have good team building skills, excellent people skills; ability to handle multiple tasks, technically oriented
• Must be energetic and a self-starter, able to promote and implement change, have good PC skills, good telephone skills, strong organizational skills, and ability to promote a continuous improvement atmosphere

• 
  
• Building complex assemblies by performing the layout, fit-up, assembly and welding operations.
  
• Certify to multiple weld specifications as required for different materials and weld processes.
  
• Reading and interpreting blueprints, sketches, drawings, routing instructions, manuals, specifications and procedures to determine dimensions and tolerances of finished weldment.
  
• Measuring, marking and scribing dimensions and reference points on material or work pieces as guides for subsequent machining or fabrication operations as required by router instructions and good shop practice.
  
• Using precision measurement instruments.
  
• Operating hand tools and other shop equipment such as grinders, positioners, turn rolls.
  
• Perform material handling of large weldments using overhead cranes, using proper lifting techniques with high degree of attention to safety.
  
• May operate fork truck, with certification requirements
  
• Ensure proper data entry of inspection and other information into computer system.
  
• Monitor and maintain proper cleanliness and function of equipment and work area on a daily basis.
  

• 
  
• A minimum of two years of trade school or vocational education or appropriate work experience in welding
  
• General welding knowledge, shop math, precision measuring instruments, blueprint reading and welding symbols
  
• Must have MIG and TIG welding experience; physical weld test will be required in selection process to meet minimum criteria for qualification.
  
• Material familiarity with carbon and stainless steel, nickel-based alloys and aluminum
  
• Robotic welding/programming a plus
  

• 
  
• Present a positive attitude
  
• Be able to work well with meeting deadlines
  
• Have a good work ethic and attendance
  
• Have the ability to communicate well with peers, engineers and leadership
  

Responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness.

The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer's aircraft.

DUTIES AND RESPONSIBILITES

* Responsible for Quality Assurance for quality and airworthiness and may report to Maintenance Supervision for the assignment of aircraft maintenance tasks.

* Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed.

* Adheres to general work and safety requirements.

* May travel to locations other than the Repair Station's fixed location to support customer aircraft.

* May perform inspections, adjusts and repairs, replace components and corrects any malfunction or deficiency with and without power applied to the aircraft.

* May perform repairs on components removed from the aircraft.

* May remove and re-install aircraft components to gain access for the performance of assigned tasks.

* May troubleshoot (fault isolation) aircraft system malfunction.

* May perform basic mechanical and electrical removals and installations.

* Documents, records, and signs for work performed and/or inspected per RSM/QCM.

* Perform other related tasks as assigned by supervision.

* May fuel and defuel aircraft.

* May perform aircraft line services.

* Performs inspection on-site and at off-site locations.

* Supports production aircraft under Production Certificate System.

* Assists other employees in the performance of their duties within area(s) of qualification.

* Is familiar with and adheres to the RSM/QCM and applicable regulations.

* Is responsible for and accountable for work performed.

QUALIFICATIONS

* Possess a Mechanics certificate with Airframe and Power plant ratings.

* Minimum 5 years' experience in aircraft maintenance and alteration of turbo fan powered business aircraft.

* Trained in or experience with the methods, techniques, practices, aids, equipment, and tools used to perform aircraft maintenance and alterations.

* Minimum 5 years' experience working on our Falcon models.

* Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment, and tools appropriate for the work being performed and approved for return to service.

* Able to work unsupervised for extended periods.

* Excellent written and verbal communications skills.

* Can Do attitude - highly motivated,

* Demonstrate excellent customer service skills.

* Team player that exhibits and models Dassault Falcon Jet core values and attributes.

* Repair Station Training

* Applicable Airframe Initial Training

* Applicable Engine Training

* Applicable Avionics Systems Training

* RVSM Training

* FAR 91.411/FAR 91.413 Training

* Human Factors Training

* Performs duties as assigned.

This off-shift position is located within our Plant 10 Whitehall Casting Operation and will direct and motivate the manufacturing work force to produce products of high quality in the most efficient and safe manner and ensure that scheduling meets business and customer needs.

Responsibilities

• Supervises an effective team; includes planning and holding meetings, preparing and conducting performance appraisals as appropriate, managing staffing levels (including vacations, overtime, and leaves of absences), assisting with career development (motivates, coaches, and trains to acquire maximum quality, productivity, morale, and cooperation), approving time and attendance, and prioritizing and making work assignments.
• Provides effective feedback to employees, both positive and negative. Maintains appropriate documentation for all disciplinary actions taken.
• Provides training and mentoring to new Supervisors.
• Directs training and orientation of employees to ensure EHS rules are known and understood, to improve work performance, and acquaint employees with company policies and procedures.
• Maintains compliance with the collective bargaining agreement. Interfaces between management and union officials. Handles grievances.
• Ensures compliance with company policies, procedures, and practices.
• Schedules production and work teams.
• Reviews production and operating reports and resolves operations, manufacturing, and maintenance problems to ensure minimum costs and prevent operational delays.
• Promotes EHS and continuous improvement initiatives and culture.
• Implements ABS principles and initiatives and is the 6S program leader.
• Interacts with their employees and other departments in order to manage the flow of product through the operation.
• Maintains inventories, as applicable.
• Creates a total awareness among assigned employees of Company policies, regulations, procedures, and business initiatives. Enforces compliance and acts as a positive resource for information and questions.
• Responds to emergencies. Assists in troubleshooting production problems. Investigates and analyzes. Initiates or recommends actions to correct deviations and variables affecting schedules, costs, quality, and other factors.
• Prepares and analyzes documentation as required (i.e. production reports, log sheets, etc).
• Reviews work procedures for safety regulations and concerns.
• Plans, develops, and implements new methods and procedures designed to improve operations, minimize operating costs, and effect greater utilization of labor and materials.
• Confers with management, engineering, and quality control personnel to resolve maintenance problems and recommend measures to improve operations and conditions of machines and equipment.
• Performs audits for safety compliance; facilitates the 6S audit program.
• Assists with budget and goal setting of the operation.
• Complies with all EHS rules required for the work environment.
• Performs other duties, as assigned.

Job Roles

• Anticipation--asks questions to understand needs of multiple stakeholder groups; prepares operation for optimal execution; contributes as a strategic partner to planning process
• Reliability--leads by example; provides goal and measurement information to others; facilitates safe environment; works effectively within parameters of bargaining unit contract
• Optimizer--improves processes; executes production for maximal output; eliminates waste; increases quality; aligns activity and resources to desired outcomes; sets others up for success
• Facilitator--interacts with internal and external stakeholders at multiple levels; furnishes accurate instructions to others; acts as liaison between planning, management and execution elements of the business
• Responsiveness--deals effectively with the unforeseen; modifies labor schedule or other variables as needed based on circumstances
• Influence-- delegates effectively; capable of explaining the why behind a recommendation or directive; advocates for the business; maintains approachability; deals with conflict and change effectively
• Organization and structure--plans daily; coordinates to deliver on time; ensures efficiencies while balancing priorities of multiple projects and stakeholder groups; has contingency plans
• Observation--sees and hears through the lens of performance; enables accuracy in scheduling, quality in production and relationship with customers; makes recommendations and changes based on patterns and data; monitors for feedback and communicates findings; sees physical and personnel issues and acts on observations; has a finger on the pulse of what occurs within the plant
• Ownership--accepts accountability for the performance of others and the business; inspires ownership and improvement in others; invites measurement

Basic Qualifications:

• High School Diploma or GED from an accredited institution
• Minimum of 3 years leadership experience
• Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.

Preferred Qualifications

• Experience supervising in a manufacturing environment
• Experience with TPM, Synchronous Mfg., and Kaizen Concepts
• Must be able to communicate effectively with all levels of the organization, have good team building skills, excellent people skills; ability to handle multiple tasks, technically oriented
• Must be energetic and a self-starter, able to promote and implement change, have good PC skills, good telephone skills, strong organizational skills, and ability to promote a continuous improvement atmosphere

Seeking an Interventional Cardiologist with peripheral skills.

- No structural work- Join an established, busy, single specialty practice that current consists of 4 interventionalists and 1 electrophysiologist, and 2 non-invasive.-Practice is located across the street from the hospital-The office has an abundance of exam rooms, well-trained medical assistants, five ARNPs- Full ancillary services including an office based cath lab (converting to an ASC in 2025-26 )nuclear medicine including SPECT and cardiac PET, cardiac CT, echocardiography, vascular ultrasound, pacer checks, remote and holter monitoring etc-Registered techs (RVT and RDMS) and have a very busy venous program including laser and radiofrequency ablations and sclerotherepy, etc.-The peripheral cases include many complex peripheral interventional cases.

Including laser atherectomy, rotoblator, angio jet, etc.

-The peripheral vascular is well established with a diverse referral base- The more experienced operators work alongside and help new peripheral interventionalists gain the experience and exposure to the complex cases at the office based lab.

-The hospital has 6 labs, 4 cardiac and Peripheral, one or two full time EP labs and a hybrid room that can do routine coronary and PV, EP WACHMAN, lead extraction, latest ablations and has a structural program including TAVR-Call rotation for STEMI is most often for established group patients mostly and once per month or so it may coincide with the hospital STEMI call-The group is on call rotation (1:4 or 5)-We have about 25-45 patients in the hospital every day to consult or round and this number will grow.

We have ARNPs to assist.

- The group admits 99% of the patients through the hospitalists or PCPs and our cardiologists only are consulting.

After you leave for the eve, usually phone calls only except interventionalist respond to STEMI or cold legs.- There will be some general cardiology for everyone in the group, but the interventionalists will be an busy with PV and coronary cases.

-Base salary guarantee, productivity bonus, CME/PTO, paid relocation, health insurance, dues, medical malpractice including tail contribution

Company:

RSA provides flight-critical components and assemblies for the commercial, defense and business jet markets. RSA designs and produces custom-engineered high pressure/high-temperature ducting assemblies for each customer’s specific performance requirements. RSA’s Peri-SealTM is one of the most sought-after connectors in the aerospace industry. Additionally, RSA designs and produces flexible joints and hoses, ozone converters and many complex assemblies to meet stringent customer needs.

Job Summary:

Responsible for planning, directing and coordinating manufacturing processes throughout the company to meet production requirements. Help plan and drive tooling requirements and improvements to increase output improve quality and reduce cost.

RSA is ITAR regulated.

Principal Duties & Responsibilities:

Developing, evaluating, improving, and documenting manufacturing processes.

Designing and implementing production assembly fixtures and tooling.

Analyzing manufacturing process flows to enhancement quality, cost reduction, and productivity.

Collaborating with all departments regarding product design to ensure effective production methods.

Ability to clearly write or edit technical documentation and assembly or process instructions.

Help trouble-shoot and drive root cause analysis.

Conform to company safety policies and procedures.

Work in both standalone and team environments to discover and implement solutions.

Analytical problem solving on manufacturing floor with production hardware.

This role is required to be on-site 5 days at the Simi Valley, CA location.

Minimum Education & Experience:

Bachelors or master’s degree in Mechanical, Manufacturing, Industrial, or Aerospace Engineering

Minimum of 1 year of experience in a related field.

Experience in sheet metal processes (forming, cutting, etc.) - metallic or composite ducting or structure manufacturing preferred.

Weld fabrication experience is a plus.

Experience with interrogating 3D models using Solidworks (preferred) or other 3D CAD software

Must be able to read and interpret blueprints and specifications.

Must be able to initiate, work through and close short- and long-term projects according to project schedule.

Must have ability to perform with ambiguous and incomplete information in a fast-paced environment.

Desirable Working Knowledge or Skills:

Microsoft Office

Use of ERP Systems: RSA uses Epicor

Knowledge of mechanical fabrication and assembly

Compensation

In compliance with all states and cities requiring transparency of pay, the expected pay range for this position is $75,000 - $90,000.

Compensation can vary depending on several factors, including a candidate's qualifications, skills, experience, competencies, and geographic location. Some roles may qualify for extra incentives like equity, commissions, or other variable performance-related bonuses. Further details will be provided by our recruiting team during the interview process.

Company Description

Flygreen™ is a private jet charter brokerage dedicated to delivering personalized travel experiences for business and leisure clients. With access to over 7,000 certified operators and a diverse fleet, Flygreen™ ensures seamless and efficient journeys tailored to individual or group needs. Join us in exploring new horizons through responsible and purposeful air travel.

Role Description

This is a full-time, on-site position based in Charlotte, NC, for a Sales Representative at Flygreen™. The Sales Representative will engage prospective clients to build relationships, identify their private travel needs, and provide custom-tailored charter solutions. Responsibilities include generating leads, managing a sales pipeline, negotiating contracts, and delivering excellent customer service. The ideal candidate will collaborate with the operations and customer success teams to ensure all travel arrangements meet clients' expectations. A goal-driven mindset and the ability to effectively communicate Flygreen’s unique value proposition are essential for this role.

Qualifications

• Strong sales and negotiation skills, with experience in prospecting, closing deals, and building long-term client relationships.
• Exceptional communication and interpersonal skills, with the ability to articulate complex solutions clearly and effectively.
• Organizational and time management skills to manage a dynamic sales pipeline and meet targets.
• Proficiency in using CRM tools and other sales software platforms to support sales activities.
• Customer service experience and a proven ability to deliver tailored solutions that exceed client expectations.
• Knowledge of the private aviation industry or related fields is a plus.
• Flexibility and capacity to adapt to a fast-paced, results-driven environment.
• Bachelor’s degree in Business, Sales, Marketing, or related field is preferred.

Financial Analyst - Only considering Local candidates

Insightful Talent is supporting a client who is looking for a Financial Analyst to join their team! In this role you will analyze financial status by collecting, monitoring, and studying data and recommending actions. Primary areas of focus are budgeting, forecasting and treasury analysis with an emphasis on accurate, timely deliverables, utilization of systems for automation and being able to solve problems and identify issues to escalate to management.

What’s in it for you:

• Work for a PE backed full-service practice management company partnering with providers who specialize in dermatology and aesthetic medicine.
• Competitive compensation package – base comp, benefits and 401K plan.
• Hybrid schedule – 3 days onsite.

What you’ll be doing:

• Assist in preparing the annual budget and monthly rolling forecast for the company at the division and practice level.
• Assist in preparing daily, weekly, monthly treasury and cash analysis reports for all bank accounts.
• Assist in mergers and acquisitions diligence and analysis.
• Takes initiative to improve and automate processes (reduce cycle time) in conjunction with the data warehouse team.
• Interface independently with other internal departments to coordinate timing and accuracy of recurring data requirements.
• Assist in monthly revenue recognition and AR reconciliation.
• Identifies financial status by comparing and analyzing actual results with plans and forecasts.
• Improve financial status by analyzing results; monitoring variances; identifying trends; recommending actions to management.
• Reconcile transactions by comparing and correcting data.

What you need to bring:

• Bachelor’s degree in business or analytical field.
• Healthcare experience in a high transaction multi-site healthcare services environment preferred.
• A minimum of 2-3 years of prior analyst experience.
• Ability to think analytically and to provide in-depth analysis and recommendations using critical thinking and sound judgment.
• Advanced Excel skills are required and will be tested by Power Users. Candidates should be extremely specific about these skills.
• Experience with Microsoft NAV, Business Central, Jet, SQL or other database tools is preferred.
• Demonstrated ability to communicate in a clear and concise manner both verbally and in writing.
• “Self-starter” who works with enthusiasm to manage responsibilities with a sense of urgency.

Insightful Talent LLC is an equal opportunity employer and prohibits discrimination and harassment of any kind. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, veteran status, or any other characteristic protected by applicable laws.