Jenner Block Jobs in Usa
1,529 positions found — Page 100
D
Systems Engineer, Senior
🏢 DCS Corp
Salary not disclosed
DCS has an exciting opportunity for a Senior Systems Engineer providing support to the Air Force Life Cycle Management Center/PEO Digital Directorate (AFLCMC/HB), filling a full time position located at Hanscom Air Force Base, Bedford, Massachusetts.
Essential Job Functions: The candidate will provide Systems Engineering assistance that applies a broad theoretical and practical knowledge of system engineering to the acquisition process.
The candidate will also provide engineering support in the design, operation, and sustainment of systems and components that cover tasks throughout the acquisition life cycle (requirements analysis through system disposal).
Conduct reviews on program portfolio to evaluate and/or recommend alternative plans, improve systems engineering programs/processes, manage/sustain program technical baseline, and design/perform system level tests to assure that subsystems and system performance is achieved in accordance with approved specifications.
Perform program reviews to evaluate alternative proposed plans, systems engineering programs, design and test results to assure that subsystem and system performance is achieved in accordance with program specifications.
Prepare technical documents which define, specify, and recommend system/subsystem characteristics.
Prepares management reports and conducts technical presentations for planning, implementation and corrective action using application of engineering economy principles.
Perform validation of systems, including development of criteria and procedures.
Analyze and/or evaluate results of major engineering systems.
Provide system/program engineering, technical support and technical training to support programs/initiatives, including but not limited to: acquisition, development, integration, sustainment, continued evolution, deployment/fielding and installation, and operations oversight.
Provide engineering support services and inputs to program and project risk management activities in compliance with AF SEAM processes.
Provide engineering support to conduct formal trade studies based on engineering performance, effectiveness, cost effectiveness, cost performance, life cycle cost, productivity, reliability, maintainability, risk, and schedule.
Provide technical recommendation support services, including reviews, studies, audits, evaluations and analyses, scientific and procedural guidance, documentation, technical analysis, and support of associated engineering IPTs.
Provide proposal analysis support services that compare and quantify proposed systems, components, approaches for technical feasibility, compatibility, and cost effectiveness.
Provide concepts and requirements analyses support services including, but not limited to, reviewing and analyzing.
Review and analyze system concepts and user requirements that have been approved and entered into a system requirements baseline (functional, allocated, and product).
Assist with material solution analysis, technology, engineering, and manufacturing development, production and deployment, and operation and support.
Support engineering technical and technical management processes associated with version/configuration control.
Requirements definition and analysis.
Architecture design, implementation, integration, verification, validation, transition, decision analysis, technical planning, technical assessment.
Requirements management, risk management, configuration management, technical data management, and interface management.
Assist with planning and execution of technical reviews and assessments (e.g.
System Requirements Review, Technology Readiness Assessment), as well as associated documentation development (e.g.
Systems Engineering Plan, Risk Management Plan) that are an inherent part of the activities and processes listed above.
Development of systems engineering documentation, an understanding of the linking interactions between systems of systems, configuration management, technical data packages and acquisition and sustainment engineering processes.
Support engineering technical and technical management processes associated with version/configuration control, to include: a) Requirements definition and analysis; b) Architecture design, implementation, integration, verification, validation, transition, decision analysis, technical planning, technical assessment; c) Requirements management, risk management, configuration management, technical data management, and interface management.
Assist with planning and execution of technical reviews and assessments (e.g.
System Requirements Review, Technology Readiness Assessment), as well as associated documentation development (e.g.
Systems Engineering Plan, Risk Management Plan) that are an inherent part of the activities and processes listed above.
The Contractor shall provide engineering support in the design, operation, and sustainment of systems and components that cover tasks throughout the acquisition life cycle (requirements analysis through system disposal).
Tasks may also include supporting Foreign Military Sales.
Conduct and support all engineering and technical activities required during the material solution analysis, technology, engineering, and manufacturing development, production and deployment, and operation and support phases of the systems acquisition process.
Develop/prepare engineering and technical documentation inherently part of the activities listed above (e.g.
Analysis of Alternatives (AoA), Systems Engineering Plan (SEP)…), systems review and analysis with written reporting, briefing, and artifact development as required for all of the technical specialty areas defined in this section; and the planning and execution of all necessary technical reviews, assessments, and interchange meetings (e.g.
Critical Design Review(CDR), Manufacturing Readiness Assessment (MRA), Reliability Technical Interchange Meeting (TIM)) and associated artifacts (e.g.
Critical Design Review entry and exit criteria).
Conduct systems architectural analyses to include system design/design feasibility and state-of-the-art assessment.
Produce architectures, document planned and existing systems, determine deficiencies, develop alternatives, recommend solutions, and support development of a plan to implement the chosen solution per acquisition and sustainment system engineering processes.
This may include traditional architecture development or Model Based Systems Engineering processes.
Track and ensure system architecture and interoperability requirements for the baselined system is maintained.
Detail operational requirements and functional interactions within the system and with other systems, considering life cycle costs, logistics supportability, human factors, et al, to determine if the basic building blocks of the system are defined in sufficient detail to support a development program effort.
Translate DoD user requirements into system requirements for designing, developing, testing and evaluating systems and subsystems using USAF and DoD approved acquisition methods.
Provide engineering analysis of system training, training equipment and simulator requirements; prepare technical documentation; and provide engineering evaluation of equipment and simulator designs.
Understand and implement robust DoD acquisition and sustainment systems engineering processes to address the life-cycle requirements.
Prepare and review program specifications for items, processes and materials.
Develop and utilize analytical, simulation, MBSE and digital engineering analysis techniques to optimize system performance and/or system effectiveness; establish system sensitivities, define system parameters, evaluate hardware and validate flight test results in terms of overall system relationships and applications.
Develop, prepare, review, and integrate selected milestone review documentation, periodic reports, and certifications as identified in current DoD and AF acquisition policy.
Review, evaluate and monitor acquisition Contractor drawings for completeness, currency, technical accuracy and conformance to requirements, specifications, regulations and quality control to ensure compliance with ASME technical Data Package format and requirements.
Complete and support requirements definition and analysis, architecture design, implementation, integration, verification and validation, transition, decision analysis, requirements management, risk management, interface management, and configuration management.
Facilitate the transfer of information, lessons learned and best practices across all customers and contractors serviced under this task order within constraints of proprietary rights.
Perform market research and trade studies to assess current and future systems to ensure they that meet mission needs/requirements.
Conduct, define and evaluate system cost, schedule, and technical performance.
Perform reviews, studies (including root cause analysis), audits, evaluations and analyses and provide technical recommendations to the Government.
Conduct engineering performance, effectiveness, cost effectiveness, cost performance, life cycle cost, producibility, reliability and maintainability, risk and scheduling trade-off studies.
Develop USAF approved Test and Evaluation Master Plans (TEMP), test plans and procedures, prepare test readiness reviews and associated test documentation using DoD and USAF standard processes, execute developmental tests and assist in operational test planning/execution, and evaluate tests in support of acquisition and sustainment programs.
Participate in integrated logistics support efforts, provisioning and source coding, maintenance data collection, technical order management, configuration management, evaluation of quality deficiency reports, and/or identification of alternate sources of supply for diminishing manufacturing/materiel sources preferred.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
Citizenship is required.
A bachelor’s degree in a related field and 10 years of experience, 5 of which must be in the DoD.
Active Secret security clearance.
Experienced in requirements development, production and deployment, and operation and support, architectures development & implementation, modeling & simulation including but not limited to Model Based Systems Engineering principles, verification & validation, technical data package development and sustainment, and principles of configuration management.
Experience with network architectures, embedded systems and application deployment across a variety of systems and hardware, to include cloud deployment and virtualization.
Familiarity with DoD Acquisition processes including Technology Maturation, Risk Reduction, Engineering Manufacturing and Development, Production and Deployment activities.
Familiarity with Electronic Warfare and/or Air Combat operations including live aircrew training/development of tactics, techniques, and procedures and Range Infrastructure architectures and systems.
Salary Range: $87,934-$130,000 At DCS, we pride ourselves on providing flexibility that allows employees to balance meaningful work with their personal lives.
We offer competitive compensation, benefits, and opportunities for learning and development.
Our broad and competitive mix of benefits is designed to support and protect employees and their families.
Our robust benefit offerings include medical, dental, 401k, ESOP, PTO, education reimbursement, work/life balance, parental and other leave programs.
Learn more about our benefits here: DCS Corp Benefits
Essential Job Functions: The candidate will provide Systems Engineering assistance that applies a broad theoretical and practical knowledge of system engineering to the acquisition process.
The candidate will also provide engineering support in the design, operation, and sustainment of systems and components that cover tasks throughout the acquisition life cycle (requirements analysis through system disposal).
Conduct reviews on program portfolio to evaluate and/or recommend alternative plans, improve systems engineering programs/processes, manage/sustain program technical baseline, and design/perform system level tests to assure that subsystems and system performance is achieved in accordance with approved specifications.
Perform program reviews to evaluate alternative proposed plans, systems engineering programs, design and test results to assure that subsystem and system performance is achieved in accordance with program specifications.
Prepare technical documents which define, specify, and recommend system/subsystem characteristics.
Prepares management reports and conducts technical presentations for planning, implementation and corrective action using application of engineering economy principles.
Perform validation of systems, including development of criteria and procedures.
Analyze and/or evaluate results of major engineering systems.
Provide system/program engineering, technical support and technical training to support programs/initiatives, including but not limited to: acquisition, development, integration, sustainment, continued evolution, deployment/fielding and installation, and operations oversight.
Provide engineering support services and inputs to program and project risk management activities in compliance with AF SEAM processes.
Provide engineering support to conduct formal trade studies based on engineering performance, effectiveness, cost effectiveness, cost performance, life cycle cost, productivity, reliability, maintainability, risk, and schedule.
Provide technical recommendation support services, including reviews, studies, audits, evaluations and analyses, scientific and procedural guidance, documentation, technical analysis, and support of associated engineering IPTs.
Provide proposal analysis support services that compare and quantify proposed systems, components, approaches for technical feasibility, compatibility, and cost effectiveness.
Provide concepts and requirements analyses support services including, but not limited to, reviewing and analyzing.
Review and analyze system concepts and user requirements that have been approved and entered into a system requirements baseline (functional, allocated, and product).
Assist with material solution analysis, technology, engineering, and manufacturing development, production and deployment, and operation and support.
Support engineering technical and technical management processes associated with version/configuration control.
Requirements definition and analysis.
Architecture design, implementation, integration, verification, validation, transition, decision analysis, technical planning, technical assessment.
Requirements management, risk management, configuration management, technical data management, and interface management.
Assist with planning and execution of technical reviews and assessments (e.g.
System Requirements Review, Technology Readiness Assessment), as well as associated documentation development (e.g.
Systems Engineering Plan, Risk Management Plan) that are an inherent part of the activities and processes listed above.
Development of systems engineering documentation, an understanding of the linking interactions between systems of systems, configuration management, technical data packages and acquisition and sustainment engineering processes.
Support engineering technical and technical management processes associated with version/configuration control, to include: a) Requirements definition and analysis; b) Architecture design, implementation, integration, verification, validation, transition, decision analysis, technical planning, technical assessment; c) Requirements management, risk management, configuration management, technical data management, and interface management.
Assist with planning and execution of technical reviews and assessments (e.g.
System Requirements Review, Technology Readiness Assessment), as well as associated documentation development (e.g.
Systems Engineering Plan, Risk Management Plan) that are an inherent part of the activities and processes listed above.
The Contractor shall provide engineering support in the design, operation, and sustainment of systems and components that cover tasks throughout the acquisition life cycle (requirements analysis through system disposal).
Tasks may also include supporting Foreign Military Sales.
Conduct and support all engineering and technical activities required during the material solution analysis, technology, engineering, and manufacturing development, production and deployment, and operation and support phases of the systems acquisition process.
Develop/prepare engineering and technical documentation inherently part of the activities listed above (e.g.
Analysis of Alternatives (AoA), Systems Engineering Plan (SEP)…), systems review and analysis with written reporting, briefing, and artifact development as required for all of the technical specialty areas defined in this section; and the planning and execution of all necessary technical reviews, assessments, and interchange meetings (e.g.
Critical Design Review(CDR), Manufacturing Readiness Assessment (MRA), Reliability Technical Interchange Meeting (TIM)) and associated artifacts (e.g.
Critical Design Review entry and exit criteria).
Conduct systems architectural analyses to include system design/design feasibility and state-of-the-art assessment.
Produce architectures, document planned and existing systems, determine deficiencies, develop alternatives, recommend solutions, and support development of a plan to implement the chosen solution per acquisition and sustainment system engineering processes.
This may include traditional architecture development or Model Based Systems Engineering processes.
Track and ensure system architecture and interoperability requirements for the baselined system is maintained.
Detail operational requirements and functional interactions within the system and with other systems, considering life cycle costs, logistics supportability, human factors, et al, to determine if the basic building blocks of the system are defined in sufficient detail to support a development program effort.
Translate DoD user requirements into system requirements for designing, developing, testing and evaluating systems and subsystems using USAF and DoD approved acquisition methods.
Provide engineering analysis of system training, training equipment and simulator requirements; prepare technical documentation; and provide engineering evaluation of equipment and simulator designs.
Understand and implement robust DoD acquisition and sustainment systems engineering processes to address the life-cycle requirements.
Prepare and review program specifications for items, processes and materials.
Develop and utilize analytical, simulation, MBSE and digital engineering analysis techniques to optimize system performance and/or system effectiveness; establish system sensitivities, define system parameters, evaluate hardware and validate flight test results in terms of overall system relationships and applications.
Develop, prepare, review, and integrate selected milestone review documentation, periodic reports, and certifications as identified in current DoD and AF acquisition policy.
Review, evaluate and monitor acquisition Contractor drawings for completeness, currency, technical accuracy and conformance to requirements, specifications, regulations and quality control to ensure compliance with ASME technical Data Package format and requirements.
Complete and support requirements definition and analysis, architecture design, implementation, integration, verification and validation, transition, decision analysis, requirements management, risk management, interface management, and configuration management.
Facilitate the transfer of information, lessons learned and best practices across all customers and contractors serviced under this task order within constraints of proprietary rights.
Perform market research and trade studies to assess current and future systems to ensure they that meet mission needs/requirements.
Conduct, define and evaluate system cost, schedule, and technical performance.
Perform reviews, studies (including root cause analysis), audits, evaluations and analyses and provide technical recommendations to the Government.
Conduct engineering performance, effectiveness, cost effectiveness, cost performance, life cycle cost, producibility, reliability and maintainability, risk and scheduling trade-off studies.
Develop USAF approved Test and Evaluation Master Plans (TEMP), test plans and procedures, prepare test readiness reviews and associated test documentation using DoD and USAF standard processes, execute developmental tests and assist in operational test planning/execution, and evaluate tests in support of acquisition and sustainment programs.
Participate in integrated logistics support efforts, provisioning and source coding, maintenance data collection, technical order management, configuration management, evaluation of quality deficiency reports, and/or identification of alternate sources of supply for diminishing manufacturing/materiel sources preferred.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
Citizenship is required.
A bachelor’s degree in a related field and 10 years of experience, 5 of which must be in the DoD.
Active Secret security clearance.
Experienced in requirements development, production and deployment, and operation and support, architectures development & implementation, modeling & simulation including but not limited to Model Based Systems Engineering principles, verification & validation, technical data package development and sustainment, and principles of configuration management.
Experience with network architectures, embedded systems and application deployment across a variety of systems and hardware, to include cloud deployment and virtualization.
Familiarity with DoD Acquisition processes including Technology Maturation, Risk Reduction, Engineering Manufacturing and Development, Production and Deployment activities.
Familiarity with Electronic Warfare and/or Air Combat operations including live aircrew training/development of tactics, techniques, and procedures and Range Infrastructure architectures and systems.
Salary Range: $87,934-$130,000 At DCS, we pride ourselves on providing flexibility that allows employees to balance meaningful work with their personal lives.
We offer competitive compensation, benefits, and opportunities for learning and development.
Our broad and competitive mix of benefits is designed to support and protect employees and their families.
Our robust benefit offerings include medical, dental, 401k, ESOP, PTO, education reimbursement, work/life balance, parental and other leave programs.
Learn more about our benefits here: DCS Corp Benefits
Not Specified
S
General Assignment Reporter
Salary not disclosed
7 News in the nation’s capital is looking for a self-starting, enterprise-focused Reporter to help us build our growing evening and late news audience across all platforms.
A great storyteller who builds local contacts and digs to find stories that genuinely impact the market and our target audience.
If you’re ready to hit the ground running and compete in the country’s most important news market – we want to hear from you! THE SUCCESSFUL CANDIDATE: Multi-platform news consumer, well-versed in the major storylines of the day and important, ongoing isues.
Solid news judgment Writes impactful, balanced and concise copy.
Understands the digital news cycle of updating and adding to your story throughout the shift.
Skilled at utilizing social media platforms.
Committed to journalistic standards and ethics.
Takes pride in pitching A block enterprise stories that set 7 News apart from the competition.
Comfortable engaging and fostering relationships with local leaders and sources.
Performs well under pressure and able to meet strict deadlines.
Responds positively to feedback and makes adjustments as required.
Thrives in a collaborative environment and brings a positive attitude to the team.
Understands news is a 24-7 business and may require nights, weekends and holidays.
MINIMUM REQUIREMENTS: Bachelor's degree in journalism or a related field Minimum 5 years reporter experience in Top 40 market.
Significant anchor experience a plus.
Familiarity with iNews, Avid and Premiere a plus.
Sinclair is proud to be an equal opportunity employer and a drug free workplace.
Employment practices will not be influenced or affected by virtue of an applicant's or employee's race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, military or veteran status or any other characteristic protected by law.
About Sinclair: Sinclair, Inc.
(Nasdaq: SBGI) is a diversified media company and a leading provider of local news and sports.
The Company owns, operates and/or provides services to 178 television stations in 81 markets affiliated with all major broadcast networks; owns Tennis Channel, the premium destination for tennis enthusiasts; multicast networks CHARGE, Comet, ROAR and The Nest.
Sinclair’s AMP Media produces a growing portfolio of digital content and original podcasts.
Additional information about Sinclair can be found at .
About the Team The life-blood of our organization is our people.
We have a compelling story, a goal-oriented culture, and we take really good care of people.
How good? Here is a glimpse: great benefits, open-door policy, upward mobility and a strong desire to see you succeed.
Ready to be part of a winning team? Let’s talk.
A great storyteller who builds local contacts and digs to find stories that genuinely impact the market and our target audience.
If you’re ready to hit the ground running and compete in the country’s most important news market – we want to hear from you! THE SUCCESSFUL CANDIDATE: Multi-platform news consumer, well-versed in the major storylines of the day and important, ongoing isues.
Solid news judgment Writes impactful, balanced and concise copy.
Understands the digital news cycle of updating and adding to your story throughout the shift.
Skilled at utilizing social media platforms.
Committed to journalistic standards and ethics.
Takes pride in pitching A block enterprise stories that set 7 News apart from the competition.
Comfortable engaging and fostering relationships with local leaders and sources.
Performs well under pressure and able to meet strict deadlines.
Responds positively to feedback and makes adjustments as required.
Thrives in a collaborative environment and brings a positive attitude to the team.
Understands news is a 24-7 business and may require nights, weekends and holidays.
MINIMUM REQUIREMENTS: Bachelor's degree in journalism or a related field Minimum 5 years reporter experience in Top 40 market.
Significant anchor experience a plus.
Familiarity with iNews, Avid and Premiere a plus.
Sinclair is proud to be an equal opportunity employer and a drug free workplace.
Employment practices will not be influenced or affected by virtue of an applicant's or employee's race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, military or veteran status or any other characteristic protected by law.
About Sinclair: Sinclair, Inc.
(Nasdaq: SBGI) is a diversified media company and a leading provider of local news and sports.
The Company owns, operates and/or provides services to 178 television stations in 81 markets affiliated with all major broadcast networks; owns Tennis Channel, the premium destination for tennis enthusiasts; multicast networks CHARGE, Comet, ROAR and The Nest.
Sinclair’s AMP Media produces a growing portfolio of digital content and original podcasts.
Additional information about Sinclair can be found at .
About the Team The life-blood of our organization is our people.
We have a compelling story, a goal-oriented culture, and we take really good care of people.
How good? Here is a glimpse: great benefits, open-door policy, upward mobility and a strong desire to see you succeed.
Ready to be part of a winning team? Let’s talk.
Not Specified
C
Assembly and Glass Processing Technician
Salary not disclosed
Job Title: Assembly and Glass Processing Technician Location: Kent, WA 98031 Duration: 06 Months+ (Possibility of permanent hire) Pay range: $30
- $32/hr.
on w2 Travel Requirements: Onsite (5 days a week) Job Description: Position Summary: While a part of a multibillion-dollar corporation, this site is a small (11 employees) operation.
Given their very efficient size, they are seeking a motivated self-starter type individual with the desire to learn glass-handling, product assembly, packaging, shipping, and receiving, all of which will keep the right candidate challenged at all times.
Candidates with Technology AAS degrees will also participate in Manufacturing Engineering and product logistics planning activities.
Essential Duties and Responsibilities: Material handling: loading and unloading glass sheets, glass blocks, steel plate, rubber rolls, bags of grit, lead wool, lead sheets, gypsum sheets, oil drums, and pallets by utilizing pallet jacks, overhead cranes, and manual lifting.
(Contingents will not operate a forklift, but if the worker is hired fulltime, they will be trained to operate forklift) Assistance in product assembly: installation of glass into steel frames, manual lead wool compacting, component assembly using bolts and gaskets, filling and draining mineral oil from windows using an electrical pump.
Assistance in fabrication: grinding, cutting, drilling, and tapping of steel Product finishing: sanding edges of cut glass, deburring steel components, and rubber gaskets by utilizing manual and power sanding methods, manual glass cleaning.
Shipping and receiving: receiving and opening of incoming shipments, verifying documentation, packaging items, and preparing crates for shipment.
Qualifications: HS diploma is required / Technology AAS degree is desired High degree of mechanical aptitude required, 1-3 years demonstrated experience Ability to use manual and power hand tools required (Wrenches, hydraulic jacks, air tools, etc.) Ability to follow written practices and procedures, read drawings and document their tasks (must follow good record keeping practices).
Valid Driver’s License is required Must have the ability to lift 50+ pounds Travel is not required as a contractor (but will be required if converted to a direct employee, 25-30% of time)
- $32/hr.
on w2 Travel Requirements: Onsite (5 days a week) Job Description: Position Summary: While a part of a multibillion-dollar corporation, this site is a small (11 employees) operation.
Given their very efficient size, they are seeking a motivated self-starter type individual with the desire to learn glass-handling, product assembly, packaging, shipping, and receiving, all of which will keep the right candidate challenged at all times.
Candidates with Technology AAS degrees will also participate in Manufacturing Engineering and product logistics planning activities.
Essential Duties and Responsibilities: Material handling: loading and unloading glass sheets, glass blocks, steel plate, rubber rolls, bags of grit, lead wool, lead sheets, gypsum sheets, oil drums, and pallets by utilizing pallet jacks, overhead cranes, and manual lifting.
(Contingents will not operate a forklift, but if the worker is hired fulltime, they will be trained to operate forklift) Assistance in product assembly: installation of glass into steel frames, manual lead wool compacting, component assembly using bolts and gaskets, filling and draining mineral oil from windows using an electrical pump.
Assistance in fabrication: grinding, cutting, drilling, and tapping of steel Product finishing: sanding edges of cut glass, deburring steel components, and rubber gaskets by utilizing manual and power sanding methods, manual glass cleaning.
Shipping and receiving: receiving and opening of incoming shipments, verifying documentation, packaging items, and preparing crates for shipment.
Qualifications: HS diploma is required / Technology AAS degree is desired High degree of mechanical aptitude required, 1-3 years demonstrated experience Ability to use manual and power hand tools required (Wrenches, hydraulic jacks, air tools, etc.) Ability to follow written practices and procedures, read drawings and document their tasks (must follow good record keeping practices).
Valid Driver’s License is required Must have the ability to lift 50+ pounds Travel is not required as a contractor (but will be required if converted to a direct employee, 25-30% of time)
Not Specified
A
CNC Machine Operator II
Salary not disclosed
Machine Operator II Parsippany, NJ 12 Months PAY: $28.19/HR.
Working Hours: 6am
- 2pm, Monday
- Friday Set-up and operate CNC and/or EDM machines to perform machining operations, fast hole drilling, graphite shaping on metal castings, forgings and bar stock according to specifications and set-up instructions, applying knowledge of machining methods.
Study work instructions (mechanical drawings) and set-up instructions to determine machining required, dimensional specifications, work procedures and methods.
Determine tool lengths, maintain tool change list and program measuring adjustments.
Install work holding devices such as blocks and tooling on table of machine using hand tools.
Lift work piece on table manually or with other material handling equipment and position and secure work piece on machine table or in holding device.
Select and install tooling, place electrodes in automatic-tool-changer (if required) in sequence specified on process sheet.
Observe numerical displays on control panel and compare with data on process sheet to verify dimensional adjustments, feed rates and speed of machining cuts.
Check program at start of each shift.
Inspect first-run piece, maintain measured dimension list.
Record and inspect key dimensions for conformance to specifications using micrometer and precision dial gauges.
Notify supervisor if machined first piece does not conform to specifications or of machine malfunction.
Deburr all pieces as per specifications and good machining practice.
Troubleshoot production problems.
Troubleshoot production, machine and quality problems.
Maintain tools and measuring instruments supplied by company.
Maintain company production and quality standards.
Report unusual problems or conditions to supervisor.
Observe company safety rules and regulations.
Perform, as assigned, other similar and related duties.
Qualifications/Requirements: High School Diploma or GED equivalent A background in machine operation, assembly, or equipment maintenance.
Must be comfortable working with tools and following manufacturing work instructions.
Eligibility Requirements: Ability to lift/push/pull at least 50 pounds, with or without reasonable accommodation Willingness to wear personal protective equipment, for example safety glasses, safety shoes gloves and gowns Ability to work overtime including occasional weekend shifts Desired Characteristics: Shop math skills Previous experience using precision measuring tools Able to work with computerized shop floor tools and basic understanding of Microsoft Word and Excel Demonstrates positive attitude, strong work ethic, and self-motivation Strong communication skills including verbal and written skills.
Working Hours: 6am
- 2pm, Monday
- Friday Set-up and operate CNC and/or EDM machines to perform machining operations, fast hole drilling, graphite shaping on metal castings, forgings and bar stock according to specifications and set-up instructions, applying knowledge of machining methods.
Study work instructions (mechanical drawings) and set-up instructions to determine machining required, dimensional specifications, work procedures and methods.
Determine tool lengths, maintain tool change list and program measuring adjustments.
Install work holding devices such as blocks and tooling on table of machine using hand tools.
Lift work piece on table manually or with other material handling equipment and position and secure work piece on machine table or in holding device.
Select and install tooling, place electrodes in automatic-tool-changer (if required) in sequence specified on process sheet.
Observe numerical displays on control panel and compare with data on process sheet to verify dimensional adjustments, feed rates and speed of machining cuts.
Check program at start of each shift.
Inspect first-run piece, maintain measured dimension list.
Record and inspect key dimensions for conformance to specifications using micrometer and precision dial gauges.
Notify supervisor if machined first piece does not conform to specifications or of machine malfunction.
Deburr all pieces as per specifications and good machining practice.
Troubleshoot production problems.
Troubleshoot production, machine and quality problems.
Maintain tools and measuring instruments supplied by company.
Maintain company production and quality standards.
Report unusual problems or conditions to supervisor.
Observe company safety rules and regulations.
Perform, as assigned, other similar and related duties.
Qualifications/Requirements: High School Diploma or GED equivalent A background in machine operation, assembly, or equipment maintenance.
Must be comfortable working with tools and following manufacturing work instructions.
Eligibility Requirements: Ability to lift/push/pull at least 50 pounds, with or without reasonable accommodation Willingness to wear personal protective equipment, for example safety glasses, safety shoes gloves and gowns Ability to work overtime including occasional weekend shifts Desired Characteristics: Shop math skills Previous experience using precision measuring tools Able to work with computerized shop floor tools and basic understanding of Microsoft Word and Excel Demonstrates positive attitude, strong work ethic, and self-motivation Strong communication skills including verbal and written skills.
Not Specified
N
Machine Operators
Salary not disclosed
Shifts 2nd shift 2:00 PM – 10:30 PM 3rd shift 9:30 PM – 6:15 AM Prior experience running CNC Machines Preferred Follow Part Process Packet How to set part up for each operation, tools needed for each program, load workholding/fixtures as needed Setup Part-Indicate parts in straight, Set X,Y,Z, Touch Off Tools Observe Machines Regularly throughout shift-2-3 machines per operator Use Measuring Equipment to Check Parts-Micrometers, Calipers, Probe, Gauge Blocks/Pins, etc.
Keep Work Area Clean-Sweep, organize, return tooling/bolts to crib Use Computer for Notes and Time Tracking-Proshop Stations & Paper Time Tickets Produce Conforming Parts- When parts are non-conforming fill out Red Tag Follow all company safety protocol COM028 Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Keep Work Area Clean-Sweep, organize, return tooling/bolts to crib Use Computer for Notes and Time Tracking-Proshop Stations & Paper Time Tickets Produce Conforming Parts- When parts are non-conforming fill out Red Tag Follow all company safety protocol COM028 Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Not Specified
N
Assembly & Glass Processing Technician
🏢 Nesco Resource
Salary not disclosed
Title: Assembly and Glass Processing Technician Location: Kent, WA, 100% onsite Hours: 6am
- 2:30pm, Monday
- Friday Interview Process: Phone screen by manager, then onsite interview US Citizenship is required (DOE contractual requirement).
No US Persons or Nationals permitted.
Other important notes: This is not an assembly line type of position.
This is custom product assembly from beginning to shipment.
1-3 years experience in a job that demonstrates mechanical aptitude required.
Automotive Technicians do well in this role.
The manager is not looking for some who has worked on a typical assembly line.
***'s goal is to convert the contingent worker at 6 months time.
There is no guarantee of this as it is dependent on the work performance and culture fit of the worker.
Company Information: Hot Cell Services, located in Kent, WA is an affiliate of
*** Incorporated, one of the world's oldest and largest glass companies.
They are the leader in the radiation shielding protection industry and have been manufacturing radiation shielding windows for over 45 years.
Position Summary: While a part of a multibillion-dollar corporation, this site is a small (11 employees) operation.
Given their very efficient size, they are seeking a motivated self-starter type individual with the desire to learn glass-handling, product assembly, packaging, shipping and receiving, all of which will keep the right candidate challenged at all times.
Candidates with Technology AAS degrees will also participate in Manufacturing Engineering and product logistics planning activities.
Essential Duties and Responsibilities:
- Material handling: loading and unloading glass sheets, glass blocks, steel plate, rubber rolls, bags of grit, lead wool, lead sheets, gypsum sheets, oil drums and pallets by utilizing pallet jacks, overhead cranes and manual lifting.
(Contingents will not operate a forklift, but if the worker is hired fulltime, they will be trained to operate forklift)
- Assistance in product assembly: installation of glass into steel frames, manual lead wool compacting, component assembly using bolts and gaskets, filling and draining mineral oil from windows using an electrical pump.
- Assistance in fabrication: grinding, cutting, drilling and tapping of steel
- Product finishing: sanding edges of cut glass, deburring steel components and rubber gaskets by utilizing manual and power sanding methods, manual glass cleaning.
- Shipping and receiving: receiving and opening of incoming shipments, verifying documentation, packaging items and preparing crates for shipment.
Qualifications: • HS diploma is required / Technology AAS degree is desired • High degree of mechanical aptitude required, 1-3 years demonstrated experience • Ability to use manual and power hand tools required (Wrenches, hydraulic jacks, air tools, etc) • Ability to follow written practices and procedures, read drawings and document their tasks (must follow good record keeping practices).
• Valid Driver's License is required • Must have the ability to lift 50+ pounds • Travel is not required as a contractor (but will be required if converted to a direct employee, 25-30% of time) Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
#EDS014
- 2:30pm, Monday
- Friday Interview Process: Phone screen by manager, then onsite interview US Citizenship is required (DOE contractual requirement).
No US Persons or Nationals permitted.
Other important notes: This is not an assembly line type of position.
This is custom product assembly from beginning to shipment.
1-3 years experience in a job that demonstrates mechanical aptitude required.
Automotive Technicians do well in this role.
The manager is not looking for some who has worked on a typical assembly line.
***'s goal is to convert the contingent worker at 6 months time.
There is no guarantee of this as it is dependent on the work performance and culture fit of the worker.
Company Information: Hot Cell Services, located in Kent, WA is an affiliate of
*** Incorporated, one of the world's oldest and largest glass companies.
They are the leader in the radiation shielding protection industry and have been manufacturing radiation shielding windows for over 45 years.
Position Summary: While a part of a multibillion-dollar corporation, this site is a small (11 employees) operation.
Given their very efficient size, they are seeking a motivated self-starter type individual with the desire to learn glass-handling, product assembly, packaging, shipping and receiving, all of which will keep the right candidate challenged at all times.
Candidates with Technology AAS degrees will also participate in Manufacturing Engineering and product logistics planning activities.
Essential Duties and Responsibilities:
- Material handling: loading and unloading glass sheets, glass blocks, steel plate, rubber rolls, bags of grit, lead wool, lead sheets, gypsum sheets, oil drums and pallets by utilizing pallet jacks, overhead cranes and manual lifting.
(Contingents will not operate a forklift, but if the worker is hired fulltime, they will be trained to operate forklift)
- Assistance in product assembly: installation of glass into steel frames, manual lead wool compacting, component assembly using bolts and gaskets, filling and draining mineral oil from windows using an electrical pump.
- Assistance in fabrication: grinding, cutting, drilling and tapping of steel
- Product finishing: sanding edges of cut glass, deburring steel components and rubber gaskets by utilizing manual and power sanding methods, manual glass cleaning.
- Shipping and receiving: receiving and opening of incoming shipments, verifying documentation, packaging items and preparing crates for shipment.
Qualifications: • HS diploma is required / Technology AAS degree is desired • High degree of mechanical aptitude required, 1-3 years demonstrated experience • Ability to use manual and power hand tools required (Wrenches, hydraulic jacks, air tools, etc) • Ability to follow written practices and procedures, read drawings and document their tasks (must follow good record keeping practices).
• Valid Driver's License is required • Must have the ability to lift 50+ pounds • Travel is not required as a contractor (but will be required if converted to a direct employee, 25-30% of time) Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
#EDS014
Not Specified
N
Quality Inspector
🏢 Nesco Resource
Salary not disclosed
Are you a motivated and driven individual with experience in inspection and a desire to provide quality products? We would love to hear from you! Our client offers a competitive salary and growth opportunities! Pay Rate: $20/hour Location: Willoughby, OH Shift
- 1st shift, 7:00am-3:00pm, Monday-Friday Requirements: Previous experience doing quality inspection in a manufacturing environment Knowledge of precision measuring instruments, tools, and equipment.
Strong attention to detail and good organizational skills Good verbal and written communication skills HS Diploma or GED required Ability to pass pre-employment screenings What will you do: Visually and dimensionally inspect ceramic core products to customer specifications.
Utilize various inspection tools and equipment including stationary, laser and transducer gages, checking blocks, hand-held inspection tools, comparator, X-Ray, and OASIS inspection computer.
Perform inspection process meeting production goals and quality requirements.
Assist in calibration of company inspection tools as needed.
Maintain required documentation and records; including customer required shipping documents (certifications, dimensional data, SDAR/deviation, etc.) Help maintain Quality filing and record keeping system.
Communicate effectively with manager, lead person, other company personnel and outside customers during source inspection to address any issues/concerns.
Assure proper completion of end of shift duties including production reporting, required TPM, and 6S activities Willingness to cross-train in other company job functions is expected.
Company Benefits Include: Medical, dental and vision insurance Vacation time and paid holidays 401k plan Quarterly and annual bonuses Employee lunches Employee recognition program Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
- 1st shift, 7:00am-3:00pm, Monday-Friday Requirements: Previous experience doing quality inspection in a manufacturing environment Knowledge of precision measuring instruments, tools, and equipment.
Strong attention to detail and good organizational skills Good verbal and written communication skills HS Diploma or GED required Ability to pass pre-employment screenings What will you do: Visually and dimensionally inspect ceramic core products to customer specifications.
Utilize various inspection tools and equipment including stationary, laser and transducer gages, checking blocks, hand-held inspection tools, comparator, X-Ray, and OASIS inspection computer.
Perform inspection process meeting production goals and quality requirements.
Assist in calibration of company inspection tools as needed.
Maintain required documentation and records; including customer required shipping documents (certifications, dimensional data, SDAR/deviation, etc.) Help maintain Quality filing and record keeping system.
Communicate effectively with manager, lead person, other company personnel and outside customers during source inspection to address any issues/concerns.
Assure proper completion of end of shift duties including production reporting, required TPM, and 6S activities Willingness to cross-train in other company job functions is expected.
Company Benefits Include: Medical, dental and vision insurance Vacation time and paid holidays 401k plan Quarterly and annual bonuses Employee lunches Employee recognition program Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Not Specified
A
Warehouse Associate
🏢 Axelon Services Corporation
Salary not disclosed
Summary: Location: Roswell, GA Duration: 4 Months Responsibilities: Handle all incoming shipments.
Perform verification of purchased products and enter order receipts into the company’s computer system.
Perform quality assurance inspections when appropriate.
Place received material, after segregating backorders, into proper warehouse storage locations.
Relocate and consolidate material and notify management of new locations when appropriate.
Pull, pack, weigh, and label materials for shipment, including assembling & holding orders.
Prepare bills of lading and express receipts.
Assist in loading the trucks.
Prepare local delivery records and complete applicable blocks on the pick ticket.
Maintain appropriate forms pending return of material.
Inspect condition of returned material prior to completing return authorization forms.
Pull stock and return it to the correct location pending credit memo, sale, or return to supplier.
Clean warehouse and trucking/parking area.
Assemble and disassemble bins, racks, shelves, and tables as needed.
Administer preventative maintenance programs to delivery vehicles and warehouse equipment to ensure proper functioning and safety practices for warehouse operations.
Record verbal/written complaints from customers concerning dissatisfaction with product or service provided.
Process the complaint by responding to the customer with the action taken to correct the problem or directing the complaint to the department supervisor/manager where necessary.
Maintain counter stock as needed.
May assist with over-the-counter sales.
Requirements: High School Degree or Equivalent Required Skills: Basic computer skills Working Environment: Work is generally performed in a warehouse environment.
The noise level is moderately quiet.
The warehouse is generally well ventilated and well lighted.
Employees may be exposed to all kinds of weather and may be required to wear protective clothing.
Operates heavy equipment.
Strict safety regulations may be required.
Physical Requirements: Work is physically strenuous and workers are required to lift heavy packages up to 50 pounds.
Employee required to use hand tools.
Perform verification of purchased products and enter order receipts into the company’s computer system.
Perform quality assurance inspections when appropriate.
Place received material, after segregating backorders, into proper warehouse storage locations.
Relocate and consolidate material and notify management of new locations when appropriate.
Pull, pack, weigh, and label materials for shipment, including assembling & holding orders.
Prepare bills of lading and express receipts.
Assist in loading the trucks.
Prepare local delivery records and complete applicable blocks on the pick ticket.
Maintain appropriate forms pending return of material.
Inspect condition of returned material prior to completing return authorization forms.
Pull stock and return it to the correct location pending credit memo, sale, or return to supplier.
Clean warehouse and trucking/parking area.
Assemble and disassemble bins, racks, shelves, and tables as needed.
Administer preventative maintenance programs to delivery vehicles and warehouse equipment to ensure proper functioning and safety practices for warehouse operations.
Record verbal/written complaints from customers concerning dissatisfaction with product or service provided.
Process the complaint by responding to the customer with the action taken to correct the problem or directing the complaint to the department supervisor/manager where necessary.
Maintain counter stock as needed.
May assist with over-the-counter sales.
Requirements: High School Degree or Equivalent Required Skills: Basic computer skills Working Environment: Work is generally performed in a warehouse environment.
The noise level is moderately quiet.
The warehouse is generally well ventilated and well lighted.
Employees may be exposed to all kinds of weather and may be required to wear protective clothing.
Operates heavy equipment.
Strict safety regulations may be required.
Physical Requirements: Work is physically strenuous and workers are required to lift heavy packages up to 50 pounds.
Employee required to use hand tools.
Not Specified
N
Press break Operator - 1st shift
🏢 Nesco Resource
Salary not disclosed
Nesco is working with a Production Company in Dublin Ohio.
Looking for a 1st shift Press Break Operator.
Monday- Friday 8a-4:30p with OT as needed Pay is based on expierance About the Company and Position Automotive sheet metal fabrication Company located in the Columbus, Ohio area.
We are seeking production workers who will manufacture sheet metal and light rail parts.
Summary Sets up and operates both mechanical and hydraulic power presses to bend, form, stretch, and straighten metal plates, metal extrusions, formed sheet metal, structural shapes and forgings by performing the following duties.
Essential Duties and Responsibilities include the following.
Other duties may be assigned.
Plans sequence of operations.
Measures and sights along workpiece to mark reference lines.
Selects and positions flat, V-block, radius, or special purpose die sets into ram and bed of machine.
Aligns and bolts dies to ram and bed of machine.
Turns handwheel, levers or operates switches to set depth and pressure of ram stroke.
Lifts and positions workpiece between dies of machine.
Starts machine to lower ram which bends or straightens workpiece between dies.
Repositions workpiece and changes dies when making multiple or successive passes.
Hand forms or finishes workpiece.
Grinds out burrs and sharp edges.
Inspects and marks job number on finished workpiece.
Bends or straightens cold metal.
Sets dies to punch and blank heavy metal.
Operates press equipped with two or more rams to bend angles or flanges or bend to radius by successive passes; or operates multiple acting hydraulic press to perform deep progressive and reverse draw operations of sheet metal.
Education and/or Experience High school diploma or general education degree (GED); or one to three years related experience and/or training; or equivalent combination of Requirements Minimum of 1 + years of experience in a manufacturing or job shop environment Blueprint, stamping and/or welding experience(s) a plus Good attitude and communication skills Must have a mechanical aptitude and strong attention to detail Must be able to use calipers and micrometers Must be able to lift up to 50lbs consistently Education and/or Experience High school diploma or general education degree (GED); or one to three years' related experience and/or training; or equivalent combination of education and experience.
Physical Demands The physical demands described in this job description are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger in a repetitive motion, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear.
The employee must regularly lift and /or move up to 50 pounds and occasionally lift and/or move up to 100 pounds.
Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
Looking for a 1st shift Press Break Operator.
Monday- Friday 8a-4:30p with OT as needed Pay is based on expierance About the Company and Position Automotive sheet metal fabrication Company located in the Columbus, Ohio area.
We are seeking production workers who will manufacture sheet metal and light rail parts.
Summary Sets up and operates both mechanical and hydraulic power presses to bend, form, stretch, and straighten metal plates, metal extrusions, formed sheet metal, structural shapes and forgings by performing the following duties.
Essential Duties and Responsibilities include the following.
Other duties may be assigned.
Plans sequence of operations.
Measures and sights along workpiece to mark reference lines.
Selects and positions flat, V-block, radius, or special purpose die sets into ram and bed of machine.
Aligns and bolts dies to ram and bed of machine.
Turns handwheel, levers or operates switches to set depth and pressure of ram stroke.
Lifts and positions workpiece between dies of machine.
Starts machine to lower ram which bends or straightens workpiece between dies.
Repositions workpiece and changes dies when making multiple or successive passes.
Hand forms or finishes workpiece.
Grinds out burrs and sharp edges.
Inspects and marks job number on finished workpiece.
Bends or straightens cold metal.
Sets dies to punch and blank heavy metal.
Operates press equipped with two or more rams to bend angles or flanges or bend to radius by successive passes; or operates multiple acting hydraulic press to perform deep progressive and reverse draw operations of sheet metal.
Education and/or Experience High school diploma or general education degree (GED); or one to three years related experience and/or training; or equivalent combination of Requirements Minimum of 1 + years of experience in a manufacturing or job shop environment Blueprint, stamping and/or welding experience(s) a plus Good attitude and communication skills Must have a mechanical aptitude and strong attention to detail Must be able to use calipers and micrometers Must be able to lift up to 50lbs consistently Education and/or Experience High school diploma or general education degree (GED); or one to three years' related experience and/or training; or equivalent combination of education and experience.
Physical Demands The physical demands described in this job description are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger in a repetitive motion, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear.
The employee must regularly lift and /or move up to 50 pounds and occasionally lift and/or move up to 100 pounds.
Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
Not Specified
N
Engineering Aide
🏢 Nesco Resource
Salary not disclosed
Description: As a Manufacturing Engineering Aide, you will: Collaborate with Manufacturing Engineers (ME) on various technical tasks, providing crucial support in gathering, maintaining, formatting, compiling, and manipulating technical data, such as engineering designs and design changes.
Produce high-quality engineering documentation, reports, marking files, designs, drawings (flow charts, block diagrams, and schematics), and machine operation procedures, ensuring accuracy and attention to detail.
Act as a key liaison between the ME and production teams, assisting in providing technical guidance and timely problem resolution to support assembly performance.
Review, respond to, and adjudicate EODIs and requests for floor support, working closely with the assembly team to identify and correct issues firsthand.
Update assembly work instructions based on drawings and/or models, reviewing content with Manufacturing Engineers prior to release to the floor.
Assist in working ME's tasks on Qnotes and EODIs, inputting data provided by ME to tools in support of planning, routing, work instruction generation, status reporting, and issue resolution.
Actively engage in PMT (Performance Management Team) and assist in implementing lean principles and technologies and other process improvement activities, ensuring continuous growth and improvement.
Maintain and control shop aids used in the production process, programming and maintaining assembly-related machines as required for their respective areas.
Work closely with the Wire Cut area to provide assistance with machine set-up and support, troubleshoot issues, optimize machine performance, and implement process improvements to enhance overall productivity and quality.
Basic Qualifications:
- Minimum 3-5 years of experience in a manufacturing role.
- Collaborate in the creation manufacturing engineer instructions and visuals
- High School diploma, or equivalent experience/combined education, with additional technical training sufficient enough to perform required basic calculations, electronic/mechanical assembly, computer operations, etc.
- Ability to read and understand engineering design drawings and interpret design specifications and their applicability to manufacturing.
- Microsoft Office suite experience with MS Word, PowerPoint, Excel, and Publisher
- Ability to work in a fast-paced environment, with multiple priorities and deadlines.
- Excellent verbal/written communications skills
- Ability to provide technical guidance and timely problem resolution to production floor operators
- Familiarity with cable and/or harnesses production, and has the ability to analyze electrical and mechanical schematics and diagrams
- IPC/WHMA-A-620 and J-STD-001 trained and/or certified
- Familiarity with mechanical, power, and pneumatic tools
- Familiarity with cable wire cutter and stripper machines Desired skills:
- Familiarity with SAP (Qnotes, Routings, Bills of material) or a related manufacturing system
- Knowledge of Lean manufacturing concepts and technique and experience generating/implementing process improvements
- Must have strong interpersonal skills and be able to work effectively in a team environment.
Custom Fields: Name: Allow Expenses Value: No Name: Work Schedule Value: 4/10-1st Shift Name: Security Clearance Value: None Name: Security Clearance Comments Value: None Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Produce high-quality engineering documentation, reports, marking files, designs, drawings (flow charts, block diagrams, and schematics), and machine operation procedures, ensuring accuracy and attention to detail.
Act as a key liaison between the ME and production teams, assisting in providing technical guidance and timely problem resolution to support assembly performance.
Review, respond to, and adjudicate EODIs and requests for floor support, working closely with the assembly team to identify and correct issues firsthand.
Update assembly work instructions based on drawings and/or models, reviewing content with Manufacturing Engineers prior to release to the floor.
Assist in working ME's tasks on Qnotes and EODIs, inputting data provided by ME to tools in support of planning, routing, work instruction generation, status reporting, and issue resolution.
Actively engage in PMT (Performance Management Team) and assist in implementing lean principles and technologies and other process improvement activities, ensuring continuous growth and improvement.
Maintain and control shop aids used in the production process, programming and maintaining assembly-related machines as required for their respective areas.
Work closely with the Wire Cut area to provide assistance with machine set-up and support, troubleshoot issues, optimize machine performance, and implement process improvements to enhance overall productivity and quality.
Basic Qualifications:
- Minimum 3-5 years of experience in a manufacturing role.
- Collaborate in the creation manufacturing engineer instructions and visuals
- High School diploma, or equivalent experience/combined education, with additional technical training sufficient enough to perform required basic calculations, electronic/mechanical assembly, computer operations, etc.
- Ability to read and understand engineering design drawings and interpret design specifications and their applicability to manufacturing.
- Microsoft Office suite experience with MS Word, PowerPoint, Excel, and Publisher
- Ability to work in a fast-paced environment, with multiple priorities and deadlines.
- Excellent verbal/written communications skills
- Ability to provide technical guidance and timely problem resolution to production floor operators
- Familiarity with cable and/or harnesses production, and has the ability to analyze electrical and mechanical schematics and diagrams
- IPC/WHMA-A-620 and J-STD-001 trained and/or certified
- Familiarity with mechanical, power, and pneumatic tools
- Familiarity with cable wire cutter and stripper machines Desired skills:
- Familiarity with SAP (Qnotes, Routings, Bills of material) or a related manufacturing system
- Knowledge of Lean manufacturing concepts and technique and experience generating/implementing process improvements
- Must have strong interpersonal skills and be able to work effectively in a team environment.
Custom Fields: Name: Allow Expenses Value: No Name: Work Schedule Value: 4/10-1st Shift Name: Security Clearance Value: None Name: Security Clearance Comments Value: None Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Not Specified
jobs by
✓ All jobs loaded