Is Ehs A Good Career Jobs in Usa

The Boise OB/GYN Clinic, located on the Boise Regional Medical Center campus, is looking for a passionate and adaptable Medical Assistant to join their wonderful team!

• This position will support an established NP at the clinic.

• Please make sure you meet the Minimum Requirements below before applying.

• ***CNA only work experience does not qualify applicants for the MA position. See Minimum Requirements below for details.***

• This clinic sees a wide variety of patients and also has a good mix of providers, from OB surgeons to Gynecologists, to NPs and Certified Nurse Midwives.

• We offer parents a wide array of choices with a full range of maternal services by mother-baby experts to make sure our patients get the care, pampering and keepsake moments they deserve.

• From routine exams to reproductive health care, our comprehensive program encompasses women's health from late adolescence through adulthood, helping guide our patients across all stages of life.

• Our women's health clinics also offer a Unique Families Program. For more information please visit,  

• In addition to the primary MA duties, there will also be opportunities for you to perform blood draws, and also help RNs with patient calls.

• You may assist in procedures such as colposcopies, Endometrial biopsies, IUD placements/removals, and Nexplanon placements/removals.

• An ideal candidate will have a passion for women's health and have experience in OB/GYN or family medicine, but will consider other experience as well.

• You will enjoy working in a strong team-oriented environment, be adaptable, and have strong communication skills.

• 40 hours/week, 4 - 10 hours shifts, during the week, Monday - Friday with rotating day off.

• Around the hours of 7:00am - 5:30pm.

• Shift start and end time can vary based on provider's schedule and clinic needs.

• 1072 N Liberty St., Ste. 100, Boise, Idaho 83704

• Located on the Boise Regional Medical Center campus

Requirements:

• High School Diploma or equivalent required at hire.

• MA certification required within 90 days of hire from one of the following Saint Alphonsus approved agencies:

  • American Association of Medical Assistants (CMA)

  • American Medical Technologists (RMA)

  • National Healthcare Association (CCMA)

  • National Center for Competency Testing (NCMA)

  • National Association of Health Professionals (NRCMA)

  • American Medical Certification Association (CMAC)

  • National Phlebotomy Certification Examination (NPCE MA)

• New Graduates: 1) MA certificate of completion required from an accredited program or school. 2) Completion of either a 100-hour MA externship or 6 months MA experience in lieu of the externship hours even with MA certification.

• Medical Assistant with Experience: 1 Year of MA experience OR Current MA Certification OR obtain or renew certification within 90 days from hire from approved credentialing agencies listed above.

• Basic Life Support for Healthcare providers certification from either AHA, ARC or the Military Training Network is required at hire.

• *Obtaining the MA certification typically requires completing an MA Program or working as a Medical Assistant for at least 1 year. See each of the credentialing organization sites for additional details. EMT and CNA certifications will not count towards an MA certification.

When Saint Alphonsus takes care of you, you can take better care of our patients. We foster personal and professional growth and offer opportunities that empower our colleagues to develop their careers. Our belief in work-life balance compliments the natural beauty, diverse landscapes, and outdoor recreation lifestyle that is unique to Idaho and Oregon.

• We offer market-competitive pay, generous PTO, and multiple options for comprehensive benefits that begin on day one.

• Benefits for your future include retirement planning and matching, college savings plans for your family, and multiple life insurance plans that can change as your needs develop.

• We are proud to offer Employee Assistance Programs, tuition reimbursement, and educational opportunities to help you learn and grow.

Visit to learn more!

Saint Alphonsus Health System is a faith-based ministry and not-for-profit health system serving Idaho, Oregon, and northern Nevada communities. The health system boasts 4 hospitals, 609 licensed beds, and 73 clinic locations. Through innovative technologies, compassionate staff, and healing environments, Saint Alphonsus' goal is to improve the health and well-being of people by emphasizing care that is patient-centered, physician-led, innovative, and community-based.

• Forbes America's Best Large Employers 2025;

• Forbes America's Best Employers for Healthcare Professionals 2025;

• Top 15 Health Systems in the country by IBM Watson Health;

• The region’s most advanced Trauma Center (Level II);

• Commission on Cancer Accredited Program through demonstrating an uncompromising commitment to improving patient survival and quality of life.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

• 
  
• $44.14/hour after training; $35.16/hour during training
  
• MondayFriday schedule with overnight travel required
  
• Hotel accommodations provided for overnight stays
  

• 
  
• Deliver drummed chemical products to customer locations
  
• Navigate urban environments including New York City
  
• Perform early morning deliveries and access upper floors of buildings
  
• Climb stairs while carrying pails/containers
  
• Routes originate from Trevose facility and serve surrounding metro areas
  

• 
  
• Box Truck
  
• 24/7 roadside assistance
  

• 
  
• Weekly pay with direct deposit
  
• 11 paid holidays and 10 PTO days annually
  
• Medical, dental, and vision coverage for the CDL Driver and family
  
• Life insurance, short-term disability, and American Fund IRA retirement plan
  

• 
  
• Valid Class A CDL with 2+ years of truck driving experience (more preferred)
  
• Hazmat and Tanker endorsements required, with relevant experience
  
• Experience driving manual transmission (fleet is automatic)
  
• Proven tanker and liquid chemical transport experience
  
• TWIC card or ability to obtain
  
• Passport or ability to obtain
  
• Current DOT Medical Card
  
• Must be clean-shaven (no facial hair)
  
• High school diploma required
  

• 
  
• Valid Class A CDL with 2+ years of truck driving experience (more preferred)
  
• Hazmat and Tanker endorsements required, with relevant experience
  
• Experience driving manual transmission (fleet is automatic)
  
• Proven tanker and liquid chemical transport experience
  
• TWIC card or ability to obtain
  
• Passport or ability to obtain
  
• Current DOT Medical Card
  
• Must be clean-shaven (no facial hair)
  
• High school diploma required
  

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Tank Sealer to join our Joint and Installation team in Everett and Renton, Washington.

As an Integral Fuel Tank Sealer, you will be essential in maintaining the highest standards of quality and safety during the sealing and assembly processes. Utilizing detailed installation plans and specifications, you will prepare tank surfaces, load sealing equipment, and apply sealants and topcoats according to established guidelines. Conducting thorough inspections and shakedowns of work areas prior to tank closure will ensure that any damaged seals or components are repaired and that all systems are functioning correctly. You will also assist with pressure testing operations and perform functional tests on fuel vent systems to identify and address any leaks. Your attention to detail will be critical in determining the appropriate sealing compounds and methods for each task, ensuring compliance. Please note that this role involves working in tight spaces, including entering the wing through a 9.5”X17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the lead or supervisor and review relevant Installation Plans (IP) and Shop Order Instants (SOI) to determine the work area.

• Gather necessary sealants, solvents, cleaners, and wipers from the designated storage area.

• Install ventilation equipment as required to ensure proper airflow in the work cavity.

• Clean tank surfaces using appropriate solvents or detergents, ensuring they are wiped dry.

• Clean and adjust sealing equipment to ensure proper functionality.

• Load sealing guns and apply sealant and/or topcoat per BAC specifications, including fillet seals to system components and sealing heads and collars of fasteners.

• Perform a shake-down of work areas prior to tank closure to repair any damaged seals or components and prepare for inspection.

• Apply wing station identification numbers on tank doors using stencils and spray paint as required.

• Install fuel tank closure panels or access doors after all necessary steps are complete and accepted by quality assurance.

• Assist with pressure testing operations and perform functional tests on fuel vent systems and tank cavities to determine if leaks exist.

• Submit completed jobs or in-process checks to inspectors for acceptance or rejection.

• Determine proper sealing compounds, sequence of work, and method of application to accomplish assignments.

• Apply aerodynamic seals to skin gaps on leading and trailing edge panels as required.

• Position tools for locating vortex generators and apply faying surface seals as needed.

• Maintain personal and tool certifications, ensuring compliance with operational standards, and contact supervisors for assistance when needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience with paints, coatings, finishes, and/or sealants.

• Experience in handling chemicals and/or hazardous materials.

• Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.

• Experience working from heights & using fall protection equipment with weight limitations.  

• Experience with safety process and/or procedures in a manufacturing or operations environment.

• Experience working with tools and following work instructions.

• Ability to access/enter a wing fuel tank opening (approximately 9.5 inch x 17.7 inch)

Preferred Qualifications:

• 1+ year of experience performing aerospace sealing.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

• Respirator trained

• Completed 1+ year of aerospace training in high school or community and technology college

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility. 

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement

Applications for this position will be accepted until Aug. 28, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Company Overview

GTI designs, engineers, and manufactures complex modular systems supporting energy storage, power generation, modular data center infrastructure, defense, and industrial markets. Operating in a high-mix, engineered-to-order manufacturing environment, GTI delivers steel enclosures, integrated platforms, and mission-critical modular systems. Maintaining safe operations, environmental compliance, and disciplined quality systems is critical to GTI’s manufacturing performance and ISO 9001-certified operating environment.

Position Overview

GTI is seeking a Director of Environmental Health & Safety (EHS) to lead enterprise safety, environmental compliance, and risk management across manufacturing operations. This role is responsible for developing and enforcing EHS programs that protect employees, ensure regulatory compliance, and support operational excellence in fabrication-driven manufacturing environments. The Director of EHS partners closely with Operations, Engineering, Quality, and Supply Chain leadership to embed safety into daily production activities while maintaining compliance with OSHA regulations, environmental standards, and ISO-aligned quality systems.

Key Responsibilities

• Develop and lead GTI’s Environmental Health & Safety strategy across manufacturing facilities

• Establish and enforce safety programs aligned with OSHA, EPA, and applicable state and federal regulations

• Build and maintain safety management systems that support ISO 9001 operational discipline

• Lead site-level safety initiatives including hazard identification, risk mitigation, and safety audits

• Oversee incident investigations, root cause analysis, and corrective action implementation

• Develop leading and lagging safety KPIs including TRIR, DART, near-miss reporting, and incident frequency rates

• Implement safety training programs covering equipment operation, lockout/tagout, confined space, welding safety, and industrial hazards

• Partner with manufacturing leadership to integrate safety into fabrication, assembly, welding, and production workflows

• Ensure environmental compliance including waste handling, hazardous material storage, emissions reporting, and regulatory documentation

• Manage site emergency response planning and incident preparedness

• Conduct internal audits and inspections to verify compliance with safety and environmental standards

• Develop and maintain safety documentation, policies, and regulatory reporting requirements

• Lead continuous improvement initiatives to reduce workplace hazards and improve operational safety culture

• Collaborate with HR and Operations to support worker safety training, onboarding safety orientation, and compliance programs

• Provide executive reporting on safety performance, compliance risks, and improvement initiatives

Required Qualifications

• Bachelor’s degree in Environmental Health & Safety, Occupational Safety, Industrial Engineering, Environmental Science, or related field

• 10+ years of EHS experience within industrial manufacturing or fabrication environments

• 5+ years of leadership experience managing EHS programs or safety teams

• Strong working knowledge of OSHA regulations and environmental compliance standards

• Experience implementing safety systems within ISO-aligned manufacturing environments

• Proven experience leading incident investigations and corrective action programs

• Strong knowledge of industrial hazards including welding, fabrication, heavy equipment, and manufacturing processes

• Demonstrated ability to influence plant leadership and drive safety culture improvements

Preferred Qualifications

• Certified Safety Professional (CSP), Certified Industrial Hygienist (CIH), or similar certification

• Experience in fabrication, modular manufacturing, or heavy industrial environments

• Experience supporting multi-site manufacturing operations

• Familiarity with environmental reporting, hazardous materials management, and sustainability initiatives

• Experience building enterprise EHS programs in growth-stage manufacturing organizations