Install Vnc Linux Debian Jobs in Usa
3,221 positions found — Page 11
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.
As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.
Use a tension meter to set cable tension according to specifications.
Conduct reaming and riveting as necessary to complete work assignments.
Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.
Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.
Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.
Locate work areas using drawings or paperwork that specify airplane and section numbers.
Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.
Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.
Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.
Disassemble parts and deburr holes to prepare for fastener installation.
Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.
Install cable control pulleys and rig control cables according to drawings and specifications.
Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.
Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
Experience using hand tools and/or hand-held power tools
Experience working with safety and quality processes and procedures.
Basic Computer experience and competency.
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.
Preferred Qualifications:
Experience reading and interpreting drawings, specifications,
material processes, schematic and diagrams
Attended a Boeing partnered manufacturing related high school or
Preferred community and technology college academic program
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $24.32 – $53.30
Applications for this position will be accepted until Sept. 04, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.
As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation
Position Responsibilities
Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.
Locate work areas using drawings and electronic resources that specify airplane and section numbers.
Verify kitted parts against installation plans and bill of materials for accuracy and suitability.
Determine and obtain the correct fasteners from PCA/MMO control per specifications.
Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.
Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.
Install and rework interior parts and assemblies, including carpets, stowbins, and seats.
Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.
Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.
Disassemble parts, deburr holes, and prepare surfaces for fastener installation.
Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.
Install fasteners in the correct sequence using appropriate tools, adhering to specifications.
Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.
Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.
Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications
1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.
1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.
1+ years of experience using hand and power tools
Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.
Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.
Ability to use hazardous chemicals.
Preferred Qualifications:
1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr. 15, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
BHE GT&S
JOB DESCRIPTION
BHE GT&S has an exciting opportunity as an Instrument & Control Technician/Sr. Instrument & Control Technician supporting our North Summit Station in Hopwood, PA.
RESPONSIBILITIES
This role installs maintains and troubleshoots instrumentation control circuits and equipment related to natural gas processes such as the compression, dehydration, measurement, transmission and storage of natural gas.
- Installation includes mounting wiring connecting testing configuring and programming instruments and devices.
- Maintenance includes routine calibration and functional testing of process instruments and devices documentation of calibration data collected during inspections utilizing the instrument inspection monitoring system verification of data communication systems that provide real time process and alarm information to the facility control center.
- Troubleshooting includes the utilization of equipment such as a laptop computer multi-meter instrument/device communicator device software documenting process calibrator etc.
- Develops and maintains interactive work relationships to accurately and effectively complete job responsibilities.
- Directs advises instructs inspects supports and/or assists contractors and employees in the design construction operation and maintenance of assets.
- Ensures regulatory and compliance standards are met.
QUALIFICATIONS
Two-year degree with a minimum of one year direct hands-on experience in instrumentation, PLCs and Computer Systems OR a minimum of four years direct hands-on experience in instrumentation, PLCs, and Computer Systems without a two-year degree.
Instrument & Control Technician :
- Two-year or higher degree in electronics engineering or related field AND a minimum of one year direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR
- A minimum of four years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems.
Required : Must acquire ISA Certified Control Systems Technician (CCST) Level 1 certification within one year of ISA eligibility, not to exceed 15 months.
Sr. Instrument & Control Technician :
- Two-year or higher degree in electronics engineering or related field AND a minimum of three years direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR
- A minimum of seven years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems.
- Ability to lead project teams, assume project supervisor role and develop action plans.
- Knowledge of Natural Gas and Electric Driven Gas Compressors.
- Knowledge of Gas and Fire Detection Systems
- Knowledge of Emergency Shut Down (ESD) Systems.
Both levels :
- Ability to interpret control system software for the purpose of diagnostic troubleshooting.
- Ability to pass electrical, electronic, and digital equipment troubleshooting tests.
- Ability to troubleshoot electrical, electronic, and pneumatic equipment.
- Ability to interpret installation specifications, wiring schematics, instrument drawings and component diagrams.
- Ability to define specifications and requisition instrumentation and control equipment.
- Ability to define problems, collect data and draw conclusions.
- Ability to work independently and as a team member.
- Ability to communicate effectively and develop rapport.
- Ability to operate diagnostic equipment (multimeter, calibrator, oscilloscope, etc.)
- Ability to operate personal computer.
- Knowledge of reciprocating and turbine engines, gas dehydration, measurement, environmental motoring, compression and supporting systems
- Knowledge of electric driven compressors may be required.
- Knowledge of electrical and electronic theory and principles
- Knowledge of Measurement devices (Press, Flow, Temperature, Moisture, Vibration, Speed, Density, Level) and ability to calibrate the same.
- Knowledge of Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS)
- Knowledge of Variable Frequency Drives (VFD)
- Knowledge of Human Machine Interface (HMI)
- Knowledge of Ethernet Communications Equipment
- Knowledge of Valves and Positioners
- Knowledge of National Electric Code and National Bureau of Standards Transmitter calibration and tolerance standards
- Knowledge of applicable regulatory requirements
Preferences :
It is strongly preferred that the candidates have the additional knowledge, skills, and abilities to effectively perform the job:
- Knowledge of electronic, radio, digital, and remote-control theory.
- Knowledge of applicable regulations and standards (FCC, FAA, AGA, API, NEC.)
- Ability to carry equipment and parts (50 - 100 pounds) from vehicle to work site, possibly over rough terrain.
- Ability to interpret installation manuals, technical instructions, wiring, diagrams, and blueprints.
- Ability to prepare technical reports and repair and maintenance records.
- Ability to install, test, maintains and repairs equipment (electronic gas measurement telemetering microwave radio satellite equipment chromatographs etc.) to facilitate effective telecommunication gas measurement and remote-control operations.
- Ability to directs and participates in installation of telecommunications equipment.
- Ability to interpret and implement gas measurement and SCADA device installation specifications.
- Ability to performs design programming installation and operation of electronic gas measurement and control systems.
- Inspects and tests facilities and equipment to identify malfunctions.
- Troubleshoots problems replaces equipment/components and repairs calibrates and maintains equipment.
- Ensures installations and equipment comply with regulations.
- Ability to supervise MC&C projects.
- Ability to maintains interactive work relationship with Gas Measurement personnel Specialists and Engineers to accurately and effectively complete job responsibilities
**Relocation assistance for this position is available dependent upon meeting eligibility requirements.
Education
- Associate (Typically two years of related, progressive work experience would be needed for candidates applying for this position who do not possess an associate degree.)
Preferred Degree
- Electronics & Communications Engineering
* Preferred Licenses, Certifications, Qualifications or Standards:
- ISA Certification (Required: within one year of ISA eligibility, not to exceed 15 months)
CHAMPION :
- Contribute to a team-centric work environment based on mutual respect and integrity
- Support the Company's CHAMPION culture, which centers around personal responsibility, continuous improvement and delivering quality for our customers
Employees must be able to perform the essential functions of the position, with or without an accommodation.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
Position descriptions are developed as guides for the employees of BHE GT&S. The management team of BHE GT&S reserves the right to modify job responsibilities and position requirements to meet the corporate business goals and needs.
ABOUT THE TEAM
BHE GT&S is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Employees must be able to perform the essential functions of the position, with or without an accommodation.
JOB INFO
Job Identification 10004544
Job Category Pipeline Operations
Posting Date 2026-03-18
Apply Before 2026-04-07T03:59:00+00:00
Job Schedule Full time
Locations 252 Jumonville Rd, Hopwood, PA, 15445, US
Travel Requirements Up to 25%
Relocation Assistance Available for this position dependent upon eligibility requirements
Business Eastern Gas Transmission and Storage, Inc.
Compensation details: 32.26-46.39
PIa35bdf77f43e-37344-40004115
Analyze, design, configure, maintain, test, troubleshoot, and implement changes to custom and package applications.
Learn and understand business processes associated with supported applications.
Develop technical designs that meet business needs and support the companys IT direction.
Properly leverage the correct technology for defined requirements.
Create and execute comprehensive unit test plans, develop test cases, assist with integration, and complete system test plans.
Develop clear documentation for completed products.
Investigate and resolve problems with supported applications in a production support environment.
Assist with coordination of software packaging requests to support Asset Management.
Solve complex problems and troubleshoot functionality for issue identification.
Learn electric utility transmission and distribution related business processes.
Become proficient in software development on supported applications and related tools.
Consistently deliver high-quality results.
Manage source code repositories, builds, and deploys.
Actively participate in a collaborative work environment.
Availability to work flexible hours to support our application portfolio.
Interact frequently with business owners/stakeholders to gather requirements for new development projects and assist in defect resolution.
Requirements: Experience with relational databases and strong SQL skills, including writing procedures, triggers, and jobs.
Experience with Microsoft Server configuration/administration (IIS, Services, Tasks).
Experience with Asset Management products such as DNV Cascade, Doble Powerbase, Hitachi Asset Performance Monitor (APM), and SEL Compass is a strong plus.
Knowledge of Linux/UNIX operating systems is a plus.
Experience with Kubernetes clusters and application deployments is a plus.
Integration experience is a strong plus.
Analytical skills to resolve problems and think creatively.
Willingness to undertake assignments involving unfamiliar subjects, with the aptitude to learn quickly.
Ability to learn new concepts in information technology and update skills to adapt to changing technology.
Good interpersonal skills and ability to work effectively as part of a team.
Highly motivated to work independently and productively in a virtual environment.
Ability to meet established priorities and schedules, and handle multiple tasks.
Demonstrated ability to provide software solutions and support the entire software development life cycle.
Proven ability to troubleshoot and solve problems in a production support environment.
Demonstrated ability to effectively prioritize and plan work, handle multiple concurrent tasks, and meet deadlines.
Required Skills: Relational databases and strong SQL skills.
Microsoft Server configuration/administration.
Analytical and problem-solving skills.
Interpersonal and team collaboration skills.
Ability to work independently and in a virtual environment.
Preferred Skills: Experience with Asset Management products.
Knowledge of Linux/UNIX operating systems.
Experience with Kubernetes clusters and application deployments.
Integration experience.
The ideal candidate will have 7–10+ years of hands-on experience working in heavy mechanical environments and must be confident in precision alignments, equipment leveling, and reading technical drawings.
Responsibilities Install and align large reciprocating compressors and industrial engines/motors (CAT, Ariel, Waukesha, etc.) Perform precision coupling alignments using tools such as OPTALIGN and FIXTURLASER XA Pro Conduct flatness testing on compressor frames and mounting surfaces Perform mechanical checks and adjustments, including: Rod run-outs Crosshead and piston clearance checks Soft foot/pull-down checks Piston end clearance adjustments Install and align compressor sheaves and belts Heat and install coupling hubs to specification Install and level compressor cylinders and distance piece supports per manufacturer specs Interpret and apply information from mechanical drawings, OEM installation manuals, balance sheets, and lubricator block diagrams Follow project schedules and work under time-sensitive conditions while maintaining high quality and safety standards Required Skills 10+ years’ experience in compressor/engine installation and heavy mechanical assembly In-depth knowledge of reciprocating gas compressors and rotating equipment Expert in using precision measurement tools (micrometers, dial indicators, laser alignment systems) Strong ability to read and interpret technical drawings and OEM installation documents Experience performing equipment leveling, alignments, and fit-ups according to manufacturer tolerances Field experience with oil & gas compression packages or industrial compressor skids Familiarity with startup/commissioning support and troubleshooting Knowledge of gas compressor operation, packaging, and mechanical systems Self-motivated, professional, and able to work effectively under pressure Additional Information Schedule: 1st Shift: Monday – Friday | 6:00 AM – 4:45 PM Weekend Work: Saturday & Sunday as needed (every other Sunday off) | 5:00 AM – 1:00 PM Schedule may vary depending on project deadlines OR 2nd Shift with a $3/Hr.
shift differential
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries regarding the following opportunity, please contact our Talent Specialist, Marshelin at (224) 507-1280 Title: Mechanical Engineer (Manufacturing / Equipment) Duration: 12 Months Location: On-site in Newton, NC Travel Requirements: Expected to be on-site in the plant during the week Travel to a supplier or vendor may be required for equipment check-out before shipment Work Schedule: Typical 40 hours per week.
May require working weekends/holidays or longer days to support installation schedule Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description Comments: 1) Candidates local to the NC region are preferred but Client is willing to consider candidates outside the local region who are willing to relocate at their own expense.
2) Candidates must be eligible to work in the US for at least 18 months.
Top skills: Experience with high-speed cable manufacturing equipment is a plus but not required (jacketing, ribbon stranding, buffering) Experience with mechanical equipment design, install, start-up and debug in a high-volume manufacturing environment.
Candidate must have 5 years demonstrated leadership experience with coordinating scheduling, workflows, etc..
Managing mechanical and electrical trades (both internal and external) executing equipment install and debug.
Skilled with use of design software (AutoCAD, Solidworks, Inventor) Scope of Position: A mechanical engineer responsible for leading and providing hands-on mechanical support for the installation, start-up and debug of high-cable manufacturing process equipment.
This includes working with a multi-functional team (mechanical, electrical, controls, facilities, IT, operations, etc.) Involves the application of mechanical principles encompassed in mechanics, hydraulics, thermodynamics, metallurgy, and machine design used for the design, production, operation, and use machinery of all types.
Requirements: Experience with high-speed cable manufacturing equipment is a plus but not required (jacketing, ribbon stranding, buffering) Experience with mechanical equipment design, install, start-up and debug in a high-volume manufacturing environment Managing mechanical and electrical trades executing equipment install and debug.
Skilled with use of design software (AutoCAD, SolidWorks, or Inventor) Knowledge of machine guarding and safety practices and standards (OSHA, ANSI, ASME, etc) OSHA 30 Certification desired Good written and oral communication skills Ability to collaborate and work with diverse teams (skills, gender, culture, race, etc.) Capable of multitasking Ability to work with minimal direction Independently determines and develops approaches to solutions Familiarity with other engineering disciplines (electrical, civil, process, etc.) Key Responsibilities Coordinating the task and workplan for team members to meet customer schedule Providing hands on input and insight into equipment installation and troubleshooting Support start-up and qualification of equipment Verifying equipment build and layout against drawings Coordinating installation plan with safety and plant receivers Conferring with Client engineers and vendors to resolve equipment install or build discrepancies Ensure safe work practices Updating drawings and equipment documentation Education: BS in Mechanical Engineering, Mechatronics, Mechanical Technology Minimum Experience: 5 Years Interview process: Initial teams meeting with manager, then onsite interview if local.
If not local, interview will be by teams.
Local candidates are strongly preferred.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
Manufacturing, Solidworks, Inventor, AutoCad, multitasking
Technical Project Manager to support controller software and test bench development.
Essential Job Functions: You will support the design, development, integration, and testing of solutions for the US Army Ground Vehicle Systems Center
- Active Protection Integration Laboratory.
Technical responsibilities will involve software development on Linux, Windows, and RTOS environments ranging from low-level driver development, up to the application layer.
These solutions will facilitate proving concepts, testing frameworks, and addressing requirements leading to informing fielded implementations.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
citizenship is required.
Ability to obtain and maintain a DoD Secret clearance.
Masters Degree with 12 years or a Bachelors Degree with 15 years of relevant technical management experience.
Proficient using Eclipse, Visual Studio, and basic Linux text editor and command-line compilers.
Ability to work in an integrated, multi-discipline team.
Experience developing significant, complex software applications.
Familiarity with Git and CM processes.
Desired Skills: RTOS experience.
GDB Debugging tool experience.
Hardware device interfacing.
Experience with processor development boards.
Experience with Ethernet network programming/development.
Python, C# experience.
Position Title: DAS Technician Level 1 Location : Job will be based in Northern Virginia, Washington, DC and Rockville, MD and travel is required Permanent/Fulltime Description: The ideal candidate will be responsible for the installation of DAS, Small Cell, BTS deployments.
This is a hands-on position that requires strong communication, documentation, and customer interface skills.
Additional duties will include installing connectors, splicing fiber, and testing and troubleshooting of new and existing systems including equipment and cabling.
Requirements: Minimum of 2 years’ experience with Telecom installations Position Summary: The DAS Technician will support DAS, small cell and BTS deployments at client sites.
Installations may include working in attics, crawl spaces and office environments.
Travel (up to 25%) as needed for remote projects.
ESSENTIAL JOB DUTIES: •Installing DAS, Small Cell and BTS deployments, swap outs and retrofits •Installing coax cables and fiber cabling •Sharing Knowledge with other team members in Construction / Installation best practices.
•Reporting on job safety and being a safety champion include JHA’s, Incident Reports and Safety Plan Preparation •The ability to work a flexible schedule including after hours and weekends.
• Strong customer service and communication skills.
•Strong proficiency in cable termination •Ability to translate design drawings into actionable daily requirements.
EDUCATION/EXPERIENCE/SPECIALIZED KNOWLEDGE AND COMPETENCY REQUIREMENTS: •Hands-On Installation / Construction Experience Required •Coax Cable Connections –coax cable connectorization preferred.
•Must be able to pass a drug test and background screening (no misdemeanor or felony convictions).
•A valid driver’s license with a clean driving record and a minimum of 1 years driving experience.
•Ability to use MS Office Products (Outlook, Word, Excel, PowerPoint, Project) for reporting.
•OSHA10 Certification Required, OSHA30 strongly preferred.
Physical Requirements: Must be comfortable walking, crawling, bending and kneeling.
• Ability to lift at least 50lbs and handle a step/extension ladder.
Location: San Diego, CA
Duration: 9 Months
Job Description:
The Build & Integration Engineer will be responsible for supporting global engineering teams and client's customers in resolving build, integration, and functional issues across multiple operating systems and platforms. This role requires strong system-level understanding, hands?on debugging expertise, and the ability to collaborate across diverse technical teams. The engineer will work closely with internal and external stakeholders to triage issues, enhance integration workflows, and contribute to automation and tooling improvements for increased efficiency.
Responsibilities:
- Establish and maintain effective working relationships with peers associated with system integration of BSP and Multimedia environment.
- Work on toolchain and system integration of RTOS functionalities.
- Communicate with source and consumer environment stakeholders to ensure seamless integration between various environments during design, development, testing and deployment phases.
- Work with team leads and project leads to provide support and contribution in preparing critical customer User Acceptance scenarios.
- Assist in deploying and migrating project artifacts within the production environment and customer development sites.
- Maintain and monitor jobs and programs in production as well as provide issue resolution for any production failures. Assist and provide guidance to resolve system-related issues.
- Develop, modify and debug automation programs with CI/CD environments
- Develop and deploy tools and technologies to optimize the build times for faster deployment.
Required:
- 2+ years of academic or work experience with Programming Language Python, etc.
- 5+ years of experience developing tools using Python that is used smart integration and release of software to external developers
- Experience with software configuration management tools (e.g., Git/Gerrit), integration, build environments, and debug aids (e.g., Trace 32).
- Experience with Linux Bash Shell
- Excellent Communication skills and self-starter.
- 5+ years of experience with makefiles, bitbake using C/C++ on Yocto Linux, Android, and RTOSs on ARM-based platforms (QNX).
Education:
- Bachelor's Degree in Engineering, Information Systems, Computer Science or related field and 2+ years of Software Engineering or related work experience OR Master's Degree in Engineering, Information Systems, Computer Science or related field and 1+ year of Software Engineering or related work experience OR PhD in Engineering, Information Systems, Computer Science or related field
Company Overview:
Fire-Dex is a family-owned, global manufacturer of head-to-toe personal protective equipment (PPE) for first responders and an Independent Service Provider (ISP) of PPE care and maintenance. Our mission is simple: to serve those who serve. We live by our values—Fun, Integrity, Respect, and Excellence (FIRE)—and take pride in being recognized as a multi award-winning organization, including Top Workplace by NorthCoast 99 and Weatherhead 100.
Role Summary
We are seeking an IT Web Developer to help support and enhance our custom web applications. This role is ideal for a developer who has a solid foundation in modern web development and is looking to grow their skills while working on real-world business systems.
The developer will work with tools such as React & JavaScript for frontend development. PHP backend using an MVC framework, and a MySQL database, all hosted in a Linux-based VPS environment. This role will collaborate closely with experienced IT team members, business stakeholders, and third-party developers contributing to new features, improvements, and ongoing application support. This will be a hybrid role located at our headquarters in Medina, OH.
Key Responsibilities
Application Development & Support
- Assist in maintaining and enhancing custom web applications
- Implement new features, UI improvements, and administrative tools under guidance from senior IT staff
- Troubleshoot and resolve application issues across frontend, backend, and database layers
- Learn and follow established coding standards and best practices
Backend & Database Contributions
- Write and maintain database queries and assist with schema updates
- Support backend development, including APIs and admin functionality
- Help ensure data accuracy, performance, and reliability
Required Skills & Experience
Experience and Education
- 1–3 years of experience supporting or building web applications
- Bachelor’s degree in Computer Science, Software Engineering, Information Systems, or IT is preferred
- Equivalent experience accepted (Associate’s degree, bootcamp, or self-taught) with demonstrable project work and ability to work in an existing codebase
Technical Foundation
- Working knowledge of JavaScript and React (components, hooks, API integration)
- Experience with PHP in a web application context
- Intermediate experience with relational database management systems, such as MySQL, Microsoft SQL Server, etc.
- Familiarity with Git and collaborative development workflows
General Competencies
- Ability to debug issues across frontend, backend, and database layer
- Willingness to learn existing systems and improve them incrementally
- Comfort working with established codebases
- Ability to cooperate effectively across teams while demonstrating strong self-accountability and leadership
- Ability to understand and interpret technical specifications to business stakeholders
- Strong attention to detail and eagerness to grow technical skills
Preferred / Nice-to-Have Skills
- Exposure to PHP frameworks (e.g. Laravel, Symfony, or similar)
- Experience with Microsoft Power Platform
- Basic familiarity with Linux environments
- Familiarity with NoSQL Databases, such as MongoDB
- Hands-on experience developing and deploying solutions in Azure and/or AWS cloud environments
- Production experience with large codes bases
- History of maintenance with business-critical systems
- Performance optimization skills (application and database-level) with large data applications
More Benefits Include:
- Competitive salary
- Employee Assistance Program
- Health, dental, and vision insurance
- Paid time off and parental leave
- 401(k) with matching, life insurance, EAP, discount programs and other perks
- Fulfillment about your work and this industry because it is impactful
More About Us:
- Our values include fun, integrity, respect, and excellence = FIRE!
- Our dedicated team of associates have helped pave the path of innovation for new products and services that are focused on the health and safety of first responders
- Temperature-controlled production floor with nice break rooms, fresh food market, and outdoor patios
- 40+ years in business
- Multi award-winning organization – including multiple repeat recognition as a Top Workplace by NorthCoast 99 eight times over, Family Business Achievement Awards, Smart Culture Awards, Cascade Business Growth Awards and Weatherhead 100!
Be part of making the highest quality personal protective equipment in the USA and keeping first responders safe!
Learn more about our culture and team!
- Find purposeful work making firefighter PPE: your work passion with the Fire-Dex family: It's Made: Turnout Gear: Opportunity Employer (EOE)
Fire- Dex is an equal opportunity employer to all, regardless of age (40 and over), ancestry, color, disability (physical and mental, including HIV and AIDS), genetic information, gender identity and expression, marital status, medical condition, military or veteran status, national origin, race (includes traits historically associated with race, including, but not limited to, hair texture and protective hairstyles), religion (includes religious dress and grooming practices), sex (includes pregnancy, childbirth, breastfeeding, and related medical conditions), sexual orientation, or any other basis protected by law. We are committed to a diverse and inclusive workforce and actively seek to ensure that our hiring and employment practices reflect this commitment.
Interview Process & Consent
Fire‑Dex may use AI‑assisted tools to record and transcribe interviews for evaluation purposes, with candidate notice and consent. These tools support, but do not replace, human decision‑making. Interview data is handled in accordance with applicable privacy laws, including CCPA and GDPR.
Please note: We are only considering direct applicants for this position. Third‑party agencies will not be considered.
