Hanna Instruments M Sdn Bhd Jobs in Usa

Responsibilities Include:

Responsible for safety performance of job assignments and maintain good housekeeping.

Work from complicated drawings, specifications and sketches and can completely follow through on job assignments.

Install, operate test, calibrate, maintain, and repair various types of measurement and control instruments, electronic, mechanical, or pneumatic, either manual or automatic. These instruments record, indicate or control, heating value, humidity or dew point, specific gravity, temperature, combustible mixtures, flow, height, odorant, volume, liquid level, speed, weight, and time. Also included are analyzers (chemical, mechanical and electronic), telematics or remote transmission, alarms and safety devices, clocks, and regulators. Installs wells, tubing, and thermocouples.

Strong knowledge and understanding of the problems of gas measurement and control within the plants, metering stations and industrial supply runs, and can make adaptations of instruments for special jobs. Conducts all necessary test and instrument maintenance on such installations.

Strong knowledge and understanding of the problems of gas measurement and control within the plants, meeting stations and industrial supply runs, and can make adaptations of instruments for special jobs. Conducts all necessary tests and instrument maintenance on such installations.

Remove and install values/regulations4 inches and under.

Paint and install simple support for instruments and electrical equipment.

Installs simple supports and equipment.

Must possess the ability to perform all duties of a Technician and a Junior Technician.

Carry and operate radio when necessary.

Must be able to identify material needed to complete jobs as well as remove it from the storeroom.

Directly assist in the development of lower graded classification as required.

Directs lower graded classification as required.

Understand the hazards of natural gas/LNG and is experienced working on natural gas/LNG applications.

Must understand cryogenic applications.

Must make reports for all repairs, tests inspections, and calibrations of instruments.

Must qualify as an operator of plant vehicles such as trucks (dump, flat, pick-up, forklift, bobcat and loader, etc.).

Clean and prepare surface (steel, wood, etc.) for painting by washing, scrubbing, wire brushing, scrapping, and chipping. Apply primer and finish coating.

Clean equipment, check oil, gas and water levels. Reports and defective parts that may need repairs on plant vehicles.

May have the ability to operate all mill workshop tools, band saw, chop box, table saw etc.

Must be able to assist in opening and closing hand valves.

Craft Specialty Work

Service and repair DCS equipment.

Calibrate and troubleshoot instruments loops.

Service analyzer and recording instruments.

Check and maintain combustible gas indicators.

Check and maintain plant odorization system

Maintain water and CO2 analyzers.

Install, set up and calibrate new devices.

Set-up, program and install plant transmitter as needed or required.

Maintain M&R station valves and regulations.

Operate various test equipment and plant system.

Check and maintain Scott freedom oxygen detectors plant wide.

Install, set-up and program Moore site-programmable volt and milliamp limit trip alarms.

Set-up and install chart recorders.

Maintain Sensit Gold Gas Detector, calibrate and repair.

Maintain manual loading stations.

Install and maintain Hazardous Detection System components.

Install, program and set-up smart process control instrumentation.

Note: Only those trained or certified in the following craft specialties may perform these tasks.

General:

Safety is the responsibility of everyone.

Safe driving is the responsibility of everyone.

Future technological advancements in computing monitoring, and date recording do not change essential functions of the job description unless the technological advancements are deemed substantial and increase the workload.

Must maintain current TWIC {Transportation Worker Identification Credential).

Must be current with OQ (Operator Qualification) to perform job duties and remain in compliance.

Able to work in inclement weather and general gas plant conditions.

Must be able to work in confined spaces when required.

Must be able to climb ladders/stairs and work at extreme heights when required.

Must be able to don/doff a full-face respirator when required.

Must be always clean shaven (PGW Respirator Readiness policy 007-10).

Must wear PPE (FR clothing, steel/composite toe work boots - no sneaker type, hard hat, safety glasses etc.-when required.

Must possess high reach, forklift, rigging and signaling training etc.

Must be knowledgeable of the Plant’s Emergency Alarm System.

Must be able to work extended hours and shifts if conditions are required.

Qualifications:

High School Diploma/GED required.

Must possess and maintain a valid driver's license.

Must acquire and maintain a CDL License.

Certified Control Technician by the International Society of Automation {ISA) or similar preferred.

Promotion to this position requires demonstrated ability to perform the job functions. Must pass a written test and (Hands on Test).

This is a drug testing position.

Sixense, Inc. is seeking an Instrumentation and Monitoring Technician to support the deployment and maintenance of structural and geotechnical instrumentation systems. In this hands-on role, you will work closely with the local team to prepare, install, and service a wide range of monitoring equipment in diverse environments.

RESPONSIBILITIES

Summary

Under the supervision of the Project Manager, the candidate will perform field and office-based tasks aligned with company policies, standards, and best practices. You’ll also contribute to project success by providing quality control support, observations, and technical recommendations to the project team.

Main Responsibilities

· Install and maintain the performance of various geotechnical and structural monitoring instruments following Sixense procedures, including but not limited to datalogging systems, Vibration Monitors, Noise Monitors and Automatic Motorized Total Stations.

· Assembling instrumentation and Automatic Data Acquisition Systems (ADAS).

· Operation of power tools and hand tools (hammer drill, Sawzall, wrenches, etc.)

· Performing the configuration of the Data Management System.

· Coordinating and communicating with clients, subcontractors, and others.

· Provide timely assistance to engineers and fellow technicians as needed.

· Perform routine maintenance and installations, which may involve working at height, on rail systems, or during night shifts.

Health & Safety

· Actively participate in Sixense’s Health and Safety Program and help foster a positive safety culture.

· Ensure full understanding of all relevant safety protocols before starting any task.

Other Responsibilities

· Communicate equipment needs, performance issues, or field findings to the Supervisor or Project Manager.

· Occasionally climbing up to ladders and lifting up to 50 lbs. to install or decommission instrumentation.

· Perform additional duties in the workshop or field as needed.

· Seek continuous improvement in operational procedures and workflows.

QUALIFICATIONS & EXPERIENCE

Education & Experience

· BS Degree in Civil Engineering or related discipline is considered an asset.

· 1+ years of relevant field experience.

· Demonstrable experience with the installation and maintenance of geotechnical and structural instruments such as piezometers, inclinometers, extensometers, and total stations.

· Basic understanding of heavy construction means and methods.

· Strong collaboration abilities, working effectively with colleagues and within multidisciplinary teams.

· Strong attention to detail and effective oral and written communication skills.

· Must be technology-minded, have basic knowledge about instrumentation systems, basic programming, software, low-voltage electrical, and remote measurements.

· Valid driver’s license with a clean driving record.

· Proficiency in MS Office Suite (Word, Excel, SharePoint, PowerPoint)

Soft Skills

· Strong work ethic and professionalism in representing the company.

· Self-motivated with the ability to work independently and collaboratively with minimal supervision.

· Must be willing to work outdoors in all weather conditions.

· Able to manage multiple priorities in a fast-paced environment.

ADDITIONAL INFORMATION

· Travel will be required both locally and nationally.

· Candidate must be willing to work outside in all weather conditions.

COMPENSATION

Salary Range: $60,000 – $100,000, based on experience and qualifications.

Sixense offers a competitive benefits package, including health insurance, 401(k) with company match, paid time off, and opportunities for professional growth and development.

To foster a diverse workforce, SIXENSE INC. encourages applications from minorities, veterans, women, and individuals with disabilities. EOE AA M/F/Vet/Disability

SIXENSE INC participates in E-Verify.

Summary

The CNC Lathe Operator is responsible for the manufacture of parts per plant specifications in an accurate and timely manner.

Essential Duties and Responsibilities

This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time.

1. Set up; edit and operate CNC lathes.

2. Inspect completed parts to ensure conformance to specifications.

3. Cleans work area.

4. Remove tooling, fixturing, and return inspection equipment to proper area.

5. Minor machine maintenance (i.e. greasing, oiling, etc.)

Qualifications

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Basic Qualifications

Must be proficient using hand measuring instruments (micrometers, calipers, height gages, optical comparator, etc.).

Must be able to read and understand blueprints, specifications and routings

Ability to operate, adjust offsets; setup experience preferred, but not necessary

Ability to edit programs, fanuc controls, G code and M code programming

Requires mathematical skills that require the ability to add, subtract, multiply, and divide.

Must perform metric conversions.

Requires good oral and written communication skills in order to interact with employees.

Ability to true in jaws

Possess a good mechanical aptitude and/or prior machinist experience a plus

Preferred Skills and Experience

Ability to work in a fast-paced environment.

Ability to communicate with all levels of the organization.

Ability to multi-task, establish priorities, set aggressive goals and achieve them.

Must be open to work overtime, as necessary.

2 axis or 4 axis/live tooling

Ability to adjust taper on the OD/ID/face

Experience with tail stock and steady rests

Able to check pin size over threads

Knowledge of bore gages

Able to add extra passes to OD/bore/face if necessary

Experience on Mori Seiki, Daewoo, Danichi, Doosan Puma machines a plus

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The phrases occasionally, regularly, and frequently correspond to the following definitions: Occasionally means up to 1/3 of working time, regularly means between 1/3 and 2/3 of working time, and frequently means 2/3 and more working time).

While performing the duties and responsibilities of this position, the employee is occasionally required to walk, use foot/feet to operate machine, reach above shoulders and move from place to place. The incumbent will regularly stand, sit and talk and listen and will frequently use hands to finger, handle or touch. Specific vision requirements for this position include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.

During the performance of his/her work duties, the incumbent will be required to occasionally lift up to 50 pounds, and will frequently lift up to 25 pounds such as moving parts from material storage and moving parts in and out of work area.

Competitive wages and benefits

Job Type: Full-time

PIa42ff7a1f28e-31181-39109657

Required

Preferred

Job Industries

• Other

• Installation includes mounting wiring connecting testing configuring and programming instruments and devices.
• Maintenance includes routine calibration and functional testing of process instruments and devices documentation of calibration data collected during inspections utilizing the instrument inspection monitoring system verification of data communication systems that provide real time process and alarm information to the facility control center.
• Troubleshooting includes the utilization of equipment such as a laptop computer multi-meter instrument/device communicator device software documenting process calibrator etc.
• Develops and maintains interactive work relationships to accurately and effectively complete job responsibilities.
• Directs advises instructs inspects supports and/or assists contractors and employees in the design construction operation and maintenance of assets.
• Ensures regulatory and compliance standards are met.

• Two-year or higher degree in electronics engineering or related field AND a minimum of one year direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR
• A minimum of four years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems.

• Two-year or higher degree in electronics engineering or related field AND a minimum of three years direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR
• A minimum of seven years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems.
• Ability to lead project teams, assume project supervisor role and develop action plans.
• Knowledge of Natural Gas and Electric Driven Gas Compressors.
• Knowledge of Gas and Fire Detection Systems
• Knowledge of Emergency Shut Down (ESD) Systems.

• Ability to interpret control system software for the purpose of diagnostic troubleshooting.
• Ability to pass electrical, electronic, and digital equipment troubleshooting tests.
• Ability to troubleshoot electrical, electronic, and pneumatic equipment.
• Ability to interpret installation specifications, wiring schematics, instrument drawings and component diagrams.
• Ability to define specifications and requisition instrumentation and control equipment.
• Ability to define problems, collect data and draw conclusions.
• Ability to work independently and as a team member.
• Ability to communicate effectively and develop rapport.
• Ability to operate diagnostic equipment (multimeter, calibrator, oscilloscope, etc.)
• Ability to operate personal computer.
• Knowledge of reciprocating and turbine engines, gas dehydration, measurement, environmental motoring, compression and supporting systems
• Knowledge of electric driven compressors may be required.
• Knowledge of electrical and electronic theory and principles
• Knowledge of Measurement devices (Press, Flow, Temperature, Moisture, Vibration, Speed, Density, Level) and ability to calibrate the same.
• Knowledge of Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS)
• Knowledge of Variable Frequency Drives (VFD)
• Knowledge of Human Machine Interface (HMI)
• Knowledge of Ethernet Communications Equipment
• Knowledge of Valves and Positioners
• Knowledge of National Electric Code and National Bureau of Standards Transmitter calibration and tolerance standards
• Knowledge of applicable regulatory requirements

• Knowledge of electronic, radio, digital, and remote-control theory.
• Knowledge of applicable regulations and standards (FCC, FAA, AGA, API, NEC.)
• Ability to carry equipment and parts (50 - 100 pounds) from vehicle to work site, possibly over rough terrain.
• Ability to interpret installation manuals, technical instructions, wiring, diagrams, and blueprints.
• Ability to prepare technical reports and repair and maintenance records.
• Ability to install, test, maintains and repairs equipment (electronic gas measurement telemetering microwave radio satellite equipment chromatographs etc.) to facilitate effective telecommunication gas measurement and remote-control operations.
• Ability to directs and participates in installation of telecommunications equipment.
• Ability to interpret and implement gas measurement and SCADA device installation specifications.
• Ability to performs design programming installation and operation of electronic gas measurement and control systems.
• Inspects and tests facilities and equipment to identify malfunctions.
• Troubleshoots problems replaces equipment/components and repairs calibrates and maintains equipment.
• Ensures installations and equipment comply with regulations.
• Ability to supervise MC&C projects.
• Ability to maintains interactive work relationship with Gas Measurement personnel Specialists and Engineers to accurately and effectively complete job responsibilities

• Associate (Typically two years of related, progressive work experience would be needed for candidates applying for this position who do not possess an associate degree.)

• Electronics & Communications Engineering

• ISA Certification (Required: within one year of ISA eligibility, not to exceed 15 months)

• Contribute to a team-centric work environment based on mutual respect and integrity
• Support the Company's CHAMPION culture, which centers around personal responsibility, continuous improvement and delivering quality for our customers

Compensation details: 32.26-46.39

PIa35bdf77f43e-37344-40004115

About the Company: Innospec Performance Chemicals is looking to add an Electrical, Instrumentation & Controls Technician to the team in Salisbury, NC.

About the Role: The Electrical, Instrumentation & Controls Technician installs, maintains and repairs electrical instrumentation and controls as listed below and maintain cable, heat and exhaust systems in water and wastewater treatment plant as well as manufacturing facilities.

Responsibilities:

• Read, understand and interpret schematics, ladder drawings, technical specifications and manufacture’s manuals related to repair, maintenance and troubleshooting of electrical instrumentation and control equipment.
• Install, maintain, repair and troubleshoot electrical systems including, but not limited to: generators, PLC’s, electric motors, motor controls, flow equipment, alarm and telemetry systems, heating and exhaust systems, conduits, cable and relays.
• Perform preventative maintenance in accordance with established procedures.
• Provide technical guidance to operations and maintenance personnel and provide suggestions to improve service and operations.
• Provide electrical expertise including technical review for in-house modifications, additions and major repairs.
• Contact and work with independent contractors regarding electrical instrumentation and control system repairs and installations.
• Coordinate with Warehouse staff to maintain an inventory of electrical parts and equipment sufficient to perform repairs and complete normal installations.
• Assist in repairs of water and sewer leaks.
• Must be available to work overtime, holidays, weekends, and on-call rotation.
• Other duties may be assigned.

Qualifications:

• This position requires knowledge of installation, maintenance, testing and repair of electrical instrumentation and control equipment and related systems; skill in the techniques of handling tools and equipment used in the electrical trade; and knowledge of safety standards and practices applicable to the repair and maintenance of electrical instrumentation and control equipment and related systems, and to provide corrective measure for resolution of problems.
• The ability to develop work procedures that will provide minimum interference with plant operations.
• The ability to read, interpret and review engineering plans and specifications and to make simple sketches of electrical parts or systems.

Required Skills:

• High School Diploma or equivalent.
• 5+ years of related experience or equivalent education in electrical instrumentation and control system maintenance, installation, and repair.
• Must have pertinent certifications and/or licenses related to job duties.
• Employee is encouraged to continue education through seminars, attend classes, etc. in order to improve knowledge of job-related skills.

Job Type: Full-time

Pay range and compensation package: Starting at $32 per hour (can increase based on experience)

Open date: February 24, 2026

Most recent review date: Tuesday, Mar 10, 2026 at 11:59pm (Pacific Time)

Applications received after this date will be reviewed by the search committee if the position has not yet been filled.

Final date: Friday, Mar 27, 2026 at 11:59pm (Pacific Time)

Applications will continue to be accepted until this date, but those received after the review date will only be considered if the position has not yet been filled.

The Advanced BioImaging Center (ABC) in the Department of Molecular and Cell Biology at the University of California, Berkeley seeks applications for two Project Scientist at the Assistant, Associate, or full rank. The selected candidate will be appointed at the rank to commensurate with prior experience. The position will report to Professor Gokul Upadhyayula, with Professor Eric Betzig serving as an additional academic mentor. The project scientist will make significant and creative contributions in the area of molecular and cellular microscopy research.

The Advanced BioImaging Center (ABC) at UC Berkeley aspires to be a world-leading multidisciplinary imaging center that drives important biological discoveries through critical new advances in all aspects of imaging technology and that drives the dissemination of that technology through a multi-pronged education strategy to scientists around the world. ABC was intentionally designed to maximize scientific productivity and impact by adopting groundbreaking imaging technologies such as the next-generation adaptive optical multifunctional microscope, incorporating the high-level technical expertise of instrumentation scientists, applied mathematicians, and computational scientists, and building worldwide collaborations aimed at tackling the challenges posed by terabyte and petabyte-scale imaging data processing, visualization, and dissemination. Members of the ABC have access to leading - edge imaging and computing hardware, as well as exposure to collaborators from a range of diverse disciplines, including in the fields of Artificial Intelligence, Data Science, Mathematics, and more.

The purpose of this project is to develop a foundation AI model capable of extracting biological insights from 4D (x,y,z,time) datasets of subcellular dynamics within physiological contexts and across scales. Incumbent will advance imaging to generate petabytes of targeted and high quality datasets necessary to prototype and build this model. The Assistant/Associate/Full Project Scientists will help develop and execute the research program focused around ABC's overarching goal of moving cell biology away from the coverslip and into physiological systems. These positions will work within a dedicated team to develop and refine the microscopy techniques. This position will manage projects and provide regular progress reports to PIs and collaborators.

The incumbent will spend 90% of their time on ABC research goals and managing and maintaining equipment in the lab and 10% of their time training/supervising collaborators, graduate students and postdoctoral fellows on MOSAIC/iAOLLSM capabilities.

Key responsibilities:

*Make significant and creative contributions to designing, building, and testing of a new high throughput adaptive optical inverted lattice light-sheet microscope (iAO-LLSM). This instrument aims to achieve a 10-fold increase in data acquisition throughput while maintaining the high-quality optical performance demonstrated in our previous work.

*Use, maintain, and oversee the operations of the two next-generation multimodal optical scopes with adaptive imaging correction (MOSAIC) microscopes at the ABC.

*Actively participate in handling/mounting biological samples on advanced microscopes and collect 4/5D datasets.

*Collaborate with a cross-disciplinary team of AI scientists, data engineers, instrumentation scientists and biologists and generate high resolution microscopy data using novel transparent developing organism reagents necessary to reach the goal of prototyping and training a 4D foundation model.

*Actively participate in national and international collaborations, presentation of research findings at scientific conferences, and publication of results in leading peer-reviewed journals.

*The incumbent will actively participate in and occasionally lead efforts to develop new projects.

These positions are eligible for full benefits.

Lab:

Contract: resources/employment-policies-contracts/bargaining-units/academic-researchers/contract/

*PhD (or equivalent international degree)

*Minimum of four years of postdoctoral research experience

*For consideration for the Associate Project Scientist rank: a minimum of 8 years of post PhD research experience

*For consideration for the full Project Scientist rank: a minimum of 14 years of post PhD research experience

*PhD or equivalent international degree in Physics, Chemical or Biological Engineering, Molecular and Cell Biology, Systems Biology, Biochemistry, or Related Field.

*Experience or expertise in light microscopy, spectroscopy, or laser optics.

*Experience or experience with adaptive optics and lattice light sheet microscopy.

*Experience or experience designing and building custom microscopes.

*Ability to troubleshoot microscopy instruments, prepare samples, design research methodology.

*Proficient with CAD programs for instrument design (e.g. Autodesk Inventor or Solidworks).

*Ability to explain concepts to a variety of audiences; and oversee a laboratory space or unit.

*A strong preference for a record of imaging, characterization and analysis of live cells and biological tissues.

*Experience with data and image processing, evaluating image quality, visualizing and analyzing image data.

*Experience making figures and movies with microscopy data for publishing articles.

*Experience collaborating with labs in a wide variety of areas.

*Experience executing large imaging projects (tens of terabytes to multi petabyte-scale)

*Experience leading technicians

*Ability to review research proposals and ideas, evaluate research capabilities, and make recommendations.

*Ability to effectively communicate, participate in efficient and open collaboration, and engage with a diverse group of researchers.

*The ideal candidate will be innovative and able to synergize various ideas and approaches, while exercising sound judgment to evaluate and take acceptable risks.

• Curriculum Vitae - Your most recently updated C.V.

  
  

• Cover Letter

  
  

• Statement of Research - Provide a summary of your major research accomplishments in approximately 250 words. Additionally, please include a brief statement highlighting your experience that is directly relevant to the key responsibilities of this position.

  
  

• 3 required (contact information only)

Help contact:

UC Berkeley is committed to diversity, equity, inclusion, and belonging in our public mission of research, teaching, and service, consistent with UC Regents Policy 4400 and University of California Academic Personnel policy (APM 210 1-d). These values are embedded in our Principles of Community, which reflect our passion for critical inquiry, debate, discovery and innovation, and our deep commitment to contributing to a better world. Every member of the UC Berkeley community has a role in sustaining a safe, caring and humane environment in which these values can thrive.

The University of California, Berkeley is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status.

For more information, please refer to the University of California's Affirmative Action and Nondiscrimination in Employment Policy and the University of California's Anti-Discrimination Policy.

In searches when letters of reference are required all letters will be treated as confidential per University of California policy and California state law. Please refer potential referees, including when letters are provided via a third party (i.e., dossier service or career center), to the UC Berkeley statement of confidentiality prior to submitting their letter.

As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements.

Unless stated otherwise, unambiguously, in the position description, this position does not include sponsorship of a new consular H-1B visa petition that would require payment of the $100,000 supplemental fee.

As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct.

• 
  
• "Misconduct" means any violation of the policies or laws governing conduct at the applicant's previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment or discrimination, as defined by the employer.
  
• UC Sexual Violence and Sexual Harassment Policy
  
• UC Anti-Discrimination Policy
  
• APM - 035: Affirmative Action and Nondiscrimination in Employment
  

Shift Details:

Option 1: Monday - Friday from 1:00 pm - 9:30 pm OR 2:00 pm - 10:30 pm

Option 2: Tuesday- Friday from 3:00 pm - 1:30 am OR 1:00 pm - 11:30 pm

Position Purpose:  

In accordance with the Mission and Guiding Behaviors; the Instrument Technician Non-Certified is responsible for the reprocessing of reusable general hospital and surgical equipment and supplies to include advanced surgical instruments and laparoscopic instruments, Orthopedic specialty, and case carts.   

What you will do: 

• Exhibits each of the Mount Carmel Service Excellence Behavior Standards holding self and others accountable and role modeling excellence for all to see.  For example:  demonstrates friendliness and courtesy, effective communication creates a professional environment and provides first class service. 

• Meets population specific and all other competencies according to department requirements. 

• Promotes a Culture of Safety by adhering to policy, procedures and plans that are in place to prevent workplace injury, violence or adverse outcome to associates and patients.  

• Relationship-based Care:  Creates a caring and healing environment that keeps the patient and family at the center of care throughout their experience at Mount Carmel following the principles of our interdisciplinary care delivery system. 

• (For patient care providers) Provides nursing care, ensures an environment of patient safety, promotes evidence-based practice and quality initiatives, and exhibits professionalism in nursing practice within the model of the ANCC Magnet Recognition Program®. 

• Performs decontamination process procedures. 

• Performs assembly process and procedures. 

• Performs sterilization process and procedures.  

• Performs sterile storage and inventory control process procedures. 

• Performs case cart preparation process utilizing appropriate pick sheets/preference cards. 

Other Responsibilities: 

• Performs above duties independently in multiple specialties.  

• Works proficiently without direct supervision.  

• Informs immediate supervisor or in-charge tech of inventory shortages and missing instrumentation.  

• Maintains a safe work environment. 

• Prioritizes workload.  

• Identifies various surgical instrumentation accurately. 

• Responsible for using proper packaging and processing techniques. 

• Communicates back-order information and facilities appropriate substitutions.  

• Responsible for Proper Quality Assurance Documentation. 

• Participates in and fosters a performance improvement approach that includes both intra-departmental and interdepartmental activities. 

• Responsible for compliance with Organizational Integrity through raising questions and  

• promptly reporting actual or potential wrongdoing. 

• All other duties as assigned.  

Minimum Qualifications: 

• Education: High School graduate or equivalent 

• License / Certification:  N/A    

• Experience:  Preferred, but not required 

• Effective Communication Skills 

• Effective mathematical skills. 

• Ability to work with minimal supervision and willingness to participate in a team environment. 

• Basic knowledge of medical terminology. 

Position Highlights and Benefits: 

• Mount Carmel Health System recognized by Forbes in 2025 as one of America’s Best State Employers. 

• Competitive compensation and benefits packages including medical, dental, and vision with coverage starting on day one. 

• Retirement savings account with employer match starting on day one.  

• Generous paid time off programs. 

• Employee recognition programs. 

• Tuition/professional development reimbursement starting on day one. 

• RN to BSN tuition 100% paid at Mount Carmel’s College of Nursing. 

• Relocation assistance (geographic and position restrictions apply).  

• Employee Referral Rewards program. 

• Mount Carmel offers DailyPay - if you’re hired as an eligible colleague, you’ll be able to see how much you’ve made every day and transfer your money any time before payday. You deserve to get paid every day! 

• Opportunity to join Diversity, Equity, and Inclusion Colleague Resource Groups. 

Ministry/Facility Information: 

Mount Carmel, a member of Trinity Health, has been a transforming healing presence in Central Ohio for over 135 years. Mount Carmel serves over 1.3 million patients each year at our five hospitals, free-standing emergency centers, outpatient facilities, surgery centers, urgent care centers, primary care and specialty care physician offices, community outreach sites and homes across the region. Mount Carmel College of Nursing offers one of Ohio's largest undergraduate, graduate, and doctor of nursing programs. If you’re seeking a rewarding career where your purpose, passion, and desire to make a dif

Shift Details:

• Full-Time/Mid-Shift: 12:00 pm - 8:30 pm EST
• Monday-Friday

Position Purpose:  

In accordance with the Mission and Guiding Behaviors; the Instrument Technician Non-Certified is responsible for the reprocessing of reusable general hospital and surgical equipment and supplies to include advanced surgical instruments and laparoscopic instruments, Orthopedic specialty, and case carts.   

What you will do: 

• Exhibits each of the Mount Carmel Service Excellence Behavior Standards holding self and others accountable and role modeling excellence for all to see.  For example:  demonstrates friendliness and courtesy, effective communication creates a professional environment and provides first class service. 

• Meets population specific and all other competencies according to department requirements. 

• Promotes a Culture of Safety by adhering to policy, procedures and plans that are in place to prevent workplace injury, violence or adverse outcome to associates and patients.  

• Relationship-based Care:  Creates a caring and healing environment that keeps the patient and family at the center of care throughout their experience at Mount Carmel following the principles of our interdisciplinary care delivery system. 

• (For patient care providers) Provides nursing care, ensures an environment of patient safety, promotes evidence-based practice and quality initiatives, and exhibits professionalism in nursing practice within the model of the ANCC Magnet Recognition Program®. 

• Performs decontamination process procedures. 

• Performs assembly process and procedures. 

• Performs sterilization process and procedures.  

• Performs sterile storage and inventory control process procedures. 

• Performs case cart preparation process utilizing appropriate pick sheets/preference cards. 

Other Responsibilities: 

• Performs above duties independently in multiple specialties.  

• Works proficiently without direct supervision.  

• Informs immediate supervisor or in-charge tech of inventory shortages and missing instrumentation.  

• Maintains a safe work environment. 

• Prioritizes workload.  

• Identifies various surgical instrumentation accurately. 

• Responsible for using proper packaging and processing techniques. 

• Communicates back-order information and facilities appropriate substitutions.  

• Responsible for Proper Quality Assurance Documentation. 

• Participates in and fosters a performance improvement approach that includes both intra-departmental and interdepartmental activities. 

• Responsible for compliance with Organizational Integrity through raising questions and  

• promptly reporting actual or potential wrongdoing. 

• All other duties as assigned.  

Minimum Qualifications: 

• Education: High School graduate or equivalent 

• License / Certification:  N/A    

• Experience:  Preferred, but not required 

• Effective Communication Skills 

• Effective mathematical skills. 

• Ability to work with minimal supervision and willingness to participate in a team environment. 

• Basic knowledge of medical terminology. 

Position Highlights and Benefits: 

• Mount Carmel Health System recognized by Forbes in 2025 as one of America’s Best State Employers. 

• Competitive compensation and benefits packages including medical, dental, and vision with coverage starting on day one. 

• Retirement savings account with employer match starting on day one.  

• Generous paid time off programs. 

• Employee recognition programs. 

• Tuition/professional development reimbursement starting on day one. 

• RN to BSN tuition 100% paid at Mount Carmel’s College of Nursing. 

• Relocation assistance (geographic and position restrictions apply).  

• Employee Referral Rewards program. 

• Mount Carmel offers DailyPay - if you’re hired as an eligible colleague, you’ll be able to see how much you’ve made every day and transfer your money any time before payday. You deserve to get paid every day! 

• Opportunity to join Diversity, Equity, and Inclusion Colleague Resource Groups. 

Ministry/Facility Information: 

Mount Carmel, a member of Trinity Health, has been a transforming healing presence in Central Ohio for over 135 years. Mount Carmel serves over 1.3 million patients each year at our five hospitals, free-standing emergency centers, outpatient facilities, surgery centers, urgent care centers, primary care and specialty care physician offices, community outreach sites and homes across the region. Mount Carmel College of Nursing offers one of Ohio's largest undergraduate, graduate, and doctor of nursing programs. If you’re seeking a rewarding career where your purpose, passion, and desire to make a difference come alive, we invite you to consider joining our team. Here, care is provided by all of us For All of You!

Shift Details

• Full-Time/Evening Shift (40 hours a week)

• Monday-Friday from 3:00 pm - 11:30 pm EST

Position Purpose:  

In accordance with the Mission and Guiding Behaviors; the Instrument

Technician Non-Certified is responsible for the reprocessing of reusable general hospital and surgical equipment and supplies to include advanced surgical instruments and laparoscopic instruments, Orthopedic specialty, and case carts.   

What you will do: 

• Exhibits each of the Mount Carmel Service Excellence Behavior Standards holding self and others accountable and role modeling excellence for all to see.  For example:  demonstrates friendliness and courtesy, effective communication creates a professional environment and provides first class service. 

• Meets population specific and all other competencies according to department requirements. 

• Promotes a Culture of Safety by adhering to policy, procedures and plans that are in place to prevent workplace injury, violence or adverse outcome to associates and patients.  

• Relationship-based Care:  Creates a caring and healing environment that keeps the patient and family at the center of care throughout their experience at Mount Carmel following the principles of our interdisciplinary care delivery system. 

• (For patient care providers) Provides nursing care, ensures an environment of patient safety, promotes evidence-based practice and quality initiatives, and exhibits professionalism in nursing practice within the model of the ANCC Magnet Recognition Program®. 

• Performs decontamination process procedures. 

• Performs assembly process and procedures. 

• Performs sterilization process and procedures.  

• Performs sterile storage and inventory control process procedures. 

• Performs case cart preparation process utilizing appropriate pick sheets/preference cards. 

Other Responsibilities: 

• Performs above duties independently in multiple specialties.  

• Works proficiently without direct supervision.  

• Informs immediate supervisor or in-charge tech of inventory shortages and missing instrumentation.  

• Maintains a safe work environment. 

• Prioritizes workload.  

• Identifies various surgical instrumentation accurately. 

• Responsible for using proper packaging and processing techniques. 

• Communicates back-order information and facilities appropriate substitutions.  

• Responsible for Proper Quality Assurance Documentation. 

• Participates in and fosters a performance improvement approach that includes both intra-departmental and interdepartmental activities. 

• Responsible for compliance with Organizational Integrity through raising questions and  

• promptly reporting actual or potential wrongdoing. 

• All other duties as assigned.  

Minimum Qualifications: 

• Education: High School graduate or equivalent 

• License / Certification:  N/A    

• Experience:  Preferred, but not required 

• Effective Communication Skills 

• Effective mathematical skills. 

• Ability to work with minimal supervision and willingness to participate in a team environment. 

• Basic knowledge of medical terminology. 

Position Highlights and Benefits: 

• Mount Carmel Health System recognized by Forbes in 2025 as one of America’s Best State Employers. 

• Competitive compensation and benefits packages including medical, dental, and vision with coverage starting on day one. 

• Retirement savings account with employer match starting on day one.  

• Generous paid time off programs. 

• Employee recognition programs. 

• Tuition/professional development reimbursement starting on day one. 

• RN to BSN tuition 100% paid at Mount Carmel’s College of Nursing. 

• Relocation assistance (geographic and position restrictions apply).  

• Employee Referral Rewards program. 

• Mount Carmel offers DailyPay - if you’re hired as an eligible colleague, you’ll be able to see how much you’ve made every day and transfer your money any time before payday. You deserve to get paid every day! 

• Opportunity to join Diversity, Equity, and Inclusion Colleague Resource Groups. 

Ministry/Facility Information: 

Mount Carmel, a member of Trinity Health, has been a transforming healing presence in Central Ohio for over 135 years. Mount Carmel serves over 1.3 million patients each year at our five hospitals, free-standing emergency centers, outpatient facilities, surgery centers, urgent care centers, primary care and specialty care physician offices, community outreach sites and homes across the region. Mount Carmel College of Nursing offers one of Ohio's largest undergraduate, graduate, and doctor of nursing programs. If you’re seeking a rewarding career where your purpose, passion, and desire to make a difference come alive, we invite you to consider joining our team. Here,