Grip Jobs in Usa
482 positions found — Page 6
PURPOSE OF THE POSITION: The person holding this supervisory position is considered a full time team member and is responsible and accountable for: the daily operation of the restaurant, assisting the RGM with hiring and training team members, directing the activities of team members, and rewarding or disciplining team members in consultation with the RGM; and, performing these functions in ways that assure compliance with all Company policies and procedures, customer satisfaction, a high level of team member morale and the attainment of sales and profit objectives. The Shift Manager reports directly to the RGM, and holds the second highest position in the restaurant if there is not an Assistant Manager. In restaurants with an Assistant Manager, the Shift Manager is the next highest position.
ESSENTIAL FUNCTIONS: The following accountabilities are essential to this position and a high degree of performance must be achieved in each in order for the incumbent to be successful. These accountabilities are organized according to our six Key Result Areas.
When the word "policies" or the phrase "policies and procedures" or similar language is used in any of the Company's documents, the term refers to all policy and procedure bulletins, manuals, training materials, memoranda, newsletters, communications on the “Document Viewer” on the computer, and all other documents and oral discussions with team members' supervisors, which relate to the restaurant. The management team shall be responsible for ensuring that all team members, including the manager himself/herself, comply with all Company policies and procedures and all Pizza Hut standards at all times and take immediate steps to correct actions not in accordance with such policies, procedures and standards.
I. PROFITABILITY
A.Planning
1.Executes the RGM’s plans and overall Daland Corporation plans to achieve consistent sales growth and profit growth.
2.Achieves planned/budgeted profits, as communicated by the RGM. This involves:
- a.Using established control systems and procedures to measure actual results and to identify deviations from planned results.
- b.Assisting the RGM, as requested, in developing and implementing corrective action plans to assure actual results conform to plan.
B.Policies: Complies with all Company policies and procedures, including but not limited to, those relating to inventory, cash, payroll, food handling, interactions with guests, team members, and vendors, and legal compliance.
C.Manages and Controls Cash: In conjunction with the RGM and other managers, ensures that that all cash and checks, minus the change fund is correctly deposited, credit card transactions are correctly settled, and cash over or short is minimized.
1. Performs Banking Transactions
- a. Assures that two deposits daily are prepared and deposited in the bank (more than two may be required in higher volume units.)
- i. The intent of the first deposit is to remove from the unit an amount approximately equal to the total of cash plus checks, minus the amount of the change fund.
- ii. The first deposit is to be made after 4:00 p.m., when the opening manager is ready to leave for the day.
- iii. The final deposit will be all remaining cash plus checks, minus the change fund.
- iv. The managers may take such deposits to the bank, using his/her personal vehicle, and depending on the time of day, make the deposit in the bank lobby or in the night depository.
- v. Assure the “Weekly Deposit Log” is completed for each deposit made.
- b. If requested by the RGM, the other managers shall perform the following tasks. These are the responsibility of the RGM, but may be delegated to other managers.
- i. Picks up validated deposit slips at the bank.
- ii. Verifies bank validated deposit amounts to sales and cash reports as well as the “Weekly Deposit Log,” and assures all appropriate signatures are on the “Weekly Deposit Log”.
- iii. Sends a copy of the “Weekly Deposit Log” to the Home Office with all other weekly paperwork.
D.Controls cash drawers and team member “banks”, following all established manual and computer procedures.
1. Establishes the correct number of cash drawers. Number of cash drawers in use at one time may vary from one to four depending on size of the restaurant, sales volume, method of delivering services to customer. Amount of cash in each drawer is recorded and kept in the drawer for the duration of the shift, or until “dropped” from the cash drawer to the safe.
2. Establishes cash banks for delivery drivers.
3. As needed, will operate cash drawer following established procedures for cash drawer operation.
4. As necessary, money is removed from cash drawers from time to time and secured in the safe.
5. Throughout the shift, cash drawer transactions, such as paid outs, miscellaneous receipts (paid ins), discounts and promotions are properly accounted for, including all documentation; transactions are properly entered into the computer; and, all documentation is organized and secured for transmitting to the Home Office.
6. Assures cash drawers are counted and balanced at the end of each shift or when there is a change in cashiers.
7. Records tips for servers and drivers on credit card/gift card transactions and correctly settles all credit card/gift card transactions.
8. Inform the RGM anytime cash short exceeds $5 for a day.
9. Reviews reports and otherwise takes actions to ensure that team members properly report actual sales and actual tips, and ensures that team members do not falsify credit card receipts or other Company documents. This requires due diligence on the part of the managers.
E.Assists the RGM in Managing and Controlling Cost of Sales: The actual cost per the P&L must be equal to or between Ideal Cost and Allowable Cost as calculated in the Product Cost Analysis report and Bonus Calculation Sheet. This includes these processes:
1.Utilizes manuals and/or automated procedures approved by the Company, orders all approved products used in the restaurant.
2.Properly accepts deliveries and properly stores inventory items used in the restaurant. This involves these processes:
- a.Checks in products as received off of delivery vehicles to verity product quality and verifies that amounts charged for on delivery receipt/packing slips are for amount of goods received.
- b.Uses a two-wheeled hand truck to unload and products, assists and oversees other team members in proper storage of products. Weight of items varies from 10 to 50 pounds. Full load on two-wheeled hand truck may exceed 500 pounds. Generally, ensures that more than one person is available to perform this task.
- c.“Autoposts” inventory received, or enters on inventory record the amount and cost of each product item received, as noted on delivery receipt/packing slip.
3.Accurately accounts for all product coming into the restaurant, used to prepare products, or transferred out of the restaurant.
4.Assures the proper execution of all recipes and specifications for preparing ingredients and assembling products.
5.Manages waste which involves maintaining a FIFO (First In, First Out) system and marking all products with a Made – Ready – Discard label.
6.Assures the correct order entry procedures are followed by all order takers.
7.Assures compliance with team member consumption policies.
8.Performs a Daily Product Usage Analysis on critical inventory items to assure usage meets guidelines.
9.Communicates goals to team members and follows up with team members to ensure goals are being met.
10.The following tools are used to aid in controlling Cost of Sales:
- FMS Product Cost Analysis Report
- FMS Daily Ideal Usage Report
- FMS Weekly Worksheet Report
- Bonus Calculation Sheet
- Profit and Loss Statement
- The General Ledger
- Prep Variance Report
- Daily Prep Variance Report
F.Assists the RGM in Managing and Controlling Cost of Labor: Ensures that “Flow-thru” targets/goals are achieved; actual hours used do not exceed the established labor model/matrix; and, team member productivity is maximized. This includes these processes:.
1.Ensuring the accuracy and completeness of team member timekeeping records, including tips and team member meals. Updates team member records as needed.
2. Minimizing edits to clock-in/clock-out transactions by assuring team members properly clock in at the beginning of their shift and clock out at the end of their shift.
3. Assuring team members do not clock in earlier than five (5) minutes prior to their scheduled shift.
4. Assuring the man-hours used for opening and closing the restaurant do not exceed established targets.
5.Analyzing actual labor hours used versus earned allowable labor hours and calculating the variance; and, using this information to appropriately manage labor each shift.
6.Communicating and cooperating with the Home Office Payroll Department to assure accuracy in payroll, including information about new hires, raises, promotions, and terminations.
7.Making appropriate recommendations to the RGM regarding wages within Company guidelines.
8.Eliminating overtime hours for team members who are paid on an hourly basis.
9.Eliminating supplemental tip credit pay.
10.Improving team member productivity using the measurements and tools available through the Company, as well as the following:
- Assuring the Back of the House (BOH) is “optimized”:
- i. Organized … a place for everything, and everything in its place
- ii. Lineal Flow … eliminate or minimize back tracking
- iii. Have all items located closest to the next step in the product assembly process
- iv. Minimize the number of steps taken and the reach needed for all items
- Assuring that team members are thoroughly trained.
- Ensuring that “prep levels’ are adequate for the forecasted volume of business for the day, including: products thawing/tempering; raw product prep; preassembled pizza and other products; and so on.
- Ensuring that food preparation areas, make table, cut table, and service areas are stocked appropriately before each shift and maintained during peak volume periods.
- Ensuring products are prepared quickly in accordance with time standards.
- Ensuring that tables vacated by customers are cleared, cleaned, sanitized and reset quickly.
11. Reduces turnover by managing all aspects of the restaurant professionally and in accordance with Company standards.
12. If the RGM has delegated scheduling to the Shift Manager, the Shift Manager uses established procedures to produce a sales forecast to be used in the scheduling process.
G.Managing Other Operating Expenses and Semi-Variable Expenses to Budget or less.
II. CUSTOMER SATISFACTION
A.Maintains positive customer relations, which includes:
1. Assuring personal behaviors and team member behaviors toward all customers are courteous, attentive, respectful, and enthusiastic.
2. Assuring a comfortable environment for customers.
3. Executing "Floor Management" by directing activities and greeting and interacting with customers on each shift worked.
4. Immediately resolving customer complaints by apologizing first and then assuring the satisfaction of the customer. Complaints may be received in person, by phone, or in writing. Consult with the RGM if the customer is not satisfied with your suggested resolution.
- a. B.L.A.S.T. is the acronym we use for our complaint resolution process:
- Believe the customer
- Listen to the customer
- Apologize to the customer
- Satisfy the customer
- Thank the customer
5. Immediately contacting the RGM (or DM if the RGM is not available immediately) regarding any incidents in which customers are injured or in which customers claim some harm done to them.
B. Ensures customers receive prompt, quality service. This includes:
1. If the RGM has delegated scheduling to the Shift Manager, scheduling the correct number of team members for forecast sales volume; and deploying those Team members in the correct job roles.
2. Following established service guidelines and procedures to assure all Hospitality Standards are achieved.
3. Directing team member activities to assure speed of service standards are met or exceeded, including product preparation times and delivery times.
4. Personally serving customers as required to meet the demand of the volume of business.
5. Ensuring customers are greeted properly and seated as quickly as appropriate.
6. Recognizing and dealing effectively with the special needs of customers.
7. Ensuring that customer orders are taken promptly, prepared accurately, and served quickly.
8. Ensuring customer follow-up, which means servers check back with customers frequently to see if there is anything else needed.
9. Ensuring immediate attention is given to customers ready to pay, either by prompting servers to complete the table cashout procedure or by performing the transaction of cashing out customer as needed.
10. Ensuring the phone is answered promptly and courteously, following the Telephone Service Essentials.
11. Responding to customers at pickup counter and drive-thru window; finding order; collecting money for the order; verifying order to customer; and, thanking customers.
12. Dispatching orders for delivery customers as required to meet the demands of the volume of business, grouping orders by geographical destination and instructing drivers as they arrive and depart which orders to take with them and where to go.
13. Delivering pizzas as necessary to meet the demands of the business.
14. Ensuring customers are thanked for their business.
C.Ensures quality ingredients are used to prepare all products. This includes:
1. Maintaining Food Safe Temperatures for all ingredients and products.
2. Ensuring food preparation utensils and food contact surfaces are property cleaned and sanitized.
3. Ensuring that procedures for receiving, handling and storing ingredients are followed.
4. Recognizing and correcting any raw ingredients or product problems.
5. Maintaining inventory levels which assure product freshness and no outages.
6. Eliminating the potential for cross contamination.
7. Ensuring that proper procedures are followed to prepare ingredients (dough, sauces, meats, cheeses, and vegetables).
8. Ensuring salad bar is maintained according to standards of operation (restaurant only).
9. Personally preparing ingredients as necessary.
D. Ensures quality products, which includes:
1. Planning dough, ingredient and product preparation to meet sales volumes and personally preparing these items, as necessary, to meet the demand of the business.
2. If deemed appropriate by the RGM, performing a product cookability test to verify proper oven and belt speed.
3. Following proper procedures to process customer orders.
4. Personally preparing and cooking menu items as required to meet the demands of the volume of business.
5. Taking every appropriate action, in consultation with the RGM, including driving to another restaurant to pick up product, to resolve outage or potential outage situations.
6. Maintaining inventory levels which assure product freshness and no outages.
7. Planning dough, ingredient and product preparation to meet sales volumes and personally preparing these items, as necessary, to meet the demand of the business.
8. Assuring all products are prepared according to exact specifications, recipes and procedures.
9. Personally preparing and cooking menu items as required to meet the demands of the volume of business.
E.Ensures that all standards for cleanliness and sanitation are met or exceeded, with particular attention to:
1. Restrooms.
2. Table tops; booth backs and seats; and chair seats.
3. Silverware, plateware, and glassware.
4. Dining room floors.
5. Salad bar.
F.Implements new or approved changes in policies, procedures and/or operation standards. This involves:
1. Attending training sessions.
2. Reading "Rollout Guides" or other resources.
3. Assisting the RGM with training restaurant team members of new procedures or changes.
4. Participating in crew training and other actions in the restaurant to assure full and correct implementation.
5. If requested by the RGM, assisting with updating all manuals, resources and job aids as required.
III.PEOPLE
A.Maintains positive team member relations and a positive and productive workplace, which involves:
1. Building relationships with team members based on mutual trust and respect.
2. Communicating and following the Daland “5 Star” Vision and Core Beliefs.
3. Promoting teamwork.
4. Being familiar with benefits available to team members, and referring appropriate questions to the RGM regarding these benefits.
5. Informing the RGM of all team member grievances.
6. Performing correct and consistent administration of team member disciplinary procedures, and discussing all recommended discipline with the RGM.
7. Assuring compliance with various governmental regulations, such as ensuring that all team members are clocked in while working, complying with overtime laws, child labor laws, alcoholic beverage laws, anti-discrimination and anti-harassment laws, FLSA, EEO, etc.
8. Performing consistent administration of and compliance with Company policies and procedures.
9. Communicating effectively with the crew and management team.
10. Assuring team member understanding of the Daland Corporation organization structure and career opportunities within the Company.
B. Assists the RGM with managing the size and quality of staff. The following are responsibilities of the RGM, but if requested by the RGM, the Shift Manager may assist with the following:
1. Planning, recruiting, and hiring to assure a full staff at all times and to assure adequate time for processing MVR's (motor vehicle reports), background checks, etc. Only the RGM is authorized to hire new team members; and Shift Managers are only permitted to interview applicants if authorized by the RGM.
2. Continuously recruiting and taking applications from job candidates.
3. If requested by the RGM, utilizing staffing tools, such as the Pizza Hut Hiring Zone and the team member Assessment; interviewing job candidates; and, checking their references.
4. If requested by the RGM, making recommendations to the RGM regarding the best qualified candidates.
5. Complying with Company employment practices and governmental regulations, including EEO, ADA Title I, etc.
C.Assisting the RGM in training newly hired team members and team members preparing for promotions. This involves:
1. Following Company training policies and meeting Pizza Hut Training Standards.
2. Utilizing on-line training, trainer's guides, checklists, job aids, tests and other training resources to assure a thorough job of training.
3. Using the four step training process of: (1) Preparation (2) Show & Tell; (3) Guided Practice; and (4) Follow-up to assure the trainee can perform all tasks up to required standards prior to being allowed to perform the tasks "solo."
D. Manages team member performance and supervises work. This includes:
1.Utilizing Coaching for Results, which includes:
- a.Activating team member behavior.
- (1)Providing guidance, direction, and reassurance to all team members.
- (2)Communicating non-negotiable standards of performance to team members.
- (3)Conducting team member meetings, group training sessions and Jump Start meetings.
- (4)Assigning Team members tasks from the Opening, Closing and Maintenance checklist.
- (5)Communicating job assignments for each shift to team members and assuring each team member works their assignment.
- (6)Giving instructions to team members that are clear and assure understanding.
- (7)Assigning team members to breaks.
- (8)Sending team members home early if not needed due to business conditions.
- (9)Calling team members in early, or calling extra team members to work to cover unanticipated surges in business volume.
- (10)Assuring all opening, shift, and closing job duties are completed and performed correctly.
- b.Evaluating team member behavior.
- (1)Observing team member performance each shift.
- (2)Working along side team members and assisting in the performance of their tasks, as needed.=
- (3)Monitoring team member meals and signing team member meal guest checks.
- (4)Ensuring adherence to alcoholic beverage laws of the local community
- (5)Conducting regular, written performance appraisals on all subordinates, using the procedure and forms provided by the Company and within the time specified in compensation plans.
- c.Responding to team member behavior with consequences.
- (1)Taking action (corrective or positive reinforcement) to assure team member performance meets or exceeds standards.
- (2)Providing ongoing counseling that gives praise and recognition to team members for jobs well done; identifies areas of performance needing improvement and methods for improving; and, if required, gives reprimands that are job focused.
2.Handling non-routine occurrences/emergencies and informing the RGM of such occurrences/emergencies.
E. Assists RGM with developing promotable team members in his/her restaurant and promotable management for Daland. This includes:
1. Using Company training programs and resources to prepare candidates for promotions and to assure that the management team is 100% certified in management processes, systems, policies, and procedures.
2. Making recommendations to the RGM regarding which team members are eligible for promotion to Shift Manager/Leader.
F. Assists RGM with personnel administration functions, which includes:
1. Assuring team members complete all required personnel documents such as W-4's, I-9's, Team member Acknowledgment, Arbitration Agreement, Delivery Driver Statement, New Driver Checklist, etc.; and, that these required documents are transmitted to the Home Office.
2. Documenting required payroll data for team members, including accurate recording of hours;
3. Managing worker's compensation claims, etc. in accordance with Company policies and procedures.
4. Maintaining personnel files on all team members, which includes filing all personnel documents; recording training dates, vacation dates, evaluation dates, pay increases, and absences; etc.
IV. MARKETING
A.Implements marketing programs to increase business. This includes:
1. Engaging in positive community/public relations for Pizza Hut.
2. Providing input for promotional ideas.
3. Displaying and maintaining Point of Purchase (P.O.P.) and other elements of national, co-op or local marketing programs;
4. Properly executing authorized marketing programs, including new product tests.
5. Taking initiative to recommend new opportunities for increasing business.
V. FACILITIES
A.Maintains a quality environment for our customers and team members. This includes:
1. Conducting routine Preventive Maintenance on the facility and equipment.
2. Taking corrective actions pursuant to the RGM’s safety inspections.
3. Advising the RGM regarding non-routine problems and following up to assure such problems are corrected.
4. Maintaining cleanliness and sanitation in all areas of the restaurant.
5. Organizing all work space to ensure ease of operation.
6. Providing a quality work environment that is safe and complies with all OSHA regulations.
7. Cleaning and organizing refrigeration units.
8. Ensuring floors are clean and free from obstruction.
9. Keeping HVAC vents and filters clean.
10. Ensuring trash is disposed of promptly and according to security procedures.
11. Ensuring parking lot and grounds are free of trash and debris and taking action to correct deficiencies.
12. Ensuring all equipment is used according to proper operational procedures.
13. Keeping restrooms cleaned and stocked.
14. Keeping food prep areas cleaned and sanitized according to approved procedures.
15. Ensuring the daily cleaning and maintenance of all equipment.
16. Correcting any unsafe conditions.
17. Following up to ensure all Scheduled Maintenance and Daily CM&A items are completed.
VI. ADMINISTRATION
A.Effectively manages time, allocating an appropriate amount to each Key Result Area.
B.Manages all paperwork, documentation, written reports, etc. and assures these are always submitted on time and that they are accurate, complete and organized.
C.If requested by the RGM, orders inventory items used in the restaurant. This involves these processes:
1. Review of the Inventory on Hand is performed. The Inventory on Hand is compared to the Weekly Ideal Usage, which is obtained from the Product Cost Analysis report, and a determination is made as to the amount of each particular item to order. The order is then recorded on an order sheet, or is entered into the computer for electronic transfer of order information.
2. Amount ordered of each item may be adjusted upward or downward based on projections of upcoming sales trends, coupon impact, weather changes or other extra-restaurant environmental changes.
3. Calls in orders for supplies on the phone, or electronically submits order via computer.
D.If requested by the RGM, conducts weekly inventory of all food, paper and beverage products used in the unit. This involves these processes:
1. Physically reviewing and counting the inventory on hand (which involves climbing shelves, bending, kneeling, etc.).
2. Rearranging inventory to assure proper rotation (first in, first out) and to make it easier to count and control.
3. Recording amounts of inventory on hand on the inventory form.
E.If requested by the RGM, prepares the weekly labor schedules. This involves these processes:
1. Updating Guest Check Comments file in the restaurant computer to assist in forecasting labor hours.
2. Reviewing Guest Check Comments file and upcoming promotions that may affect sales during the upcoming week.
3. Forecasting anticipated sales volume by shift, by day and by week. The forecast is based on knowledge of any outside events that may influence sales such as coupons, promotions, etc. Particular consideration must be given to how sales are generated--that is, dine-in business contrasted to carry-out business or delivery business.
4. Updating sales forecasts in the FMS (computer system) based on outside events that may influence sales.
5. Reviewing requests for days off that have been turned in by team members and when possible allowing for requested days off.
6. Using experience, past schedules, Black Book information, Guest Check Comments, knowledge of team members' abilities, labor goals, and FMS (computer system) recommended labor schedule to assist in scheduling the proper number of team members each shift to meet sales volume and labor hour guidelines.
7. Obtaining the RGM's approval of the schedule, then posting the final schedule in accordance with Daland Corporation's policies and procedures.
F.Performs daily accounting procedures. This includes these processes:
1. At close of business day requests a sales report from the FMS computer to determine total sales entered into the cash drawers throughout the system.
2. Any cash paidouts or miscellaneous deposits from the day are verified with what is in the system.
3. Cash on hand is counted and reconciled against total sales.
4. Total deposit is calculated, and a deposit is prepared.
5. Dough waste and PPP waste is documented and calculated on the form provided and filed for use in forecasting future prep levels.
6. All gift checks are counted and verified against prior counts less current gift check sales on the Gift Check Tracking form.
G.If requested by the RGM, performs weekly accounting procedures. This includes these processes:
1. Completing, as required, the Weekly Sales Analysis and analyzing it.
2. Completing the Weekly Inventory.
3. Completing the payroll functions.
4. Analyzing the Daily Business Summary Report to determine performance in key measurement areas.
5. Preparing the weekly packet for the home office, using the checklist provided to assure all required items are included.
6. Calling any needed FRS numbers or statistics to the District Manager.
H.Meets all deadlines and assures that subordinates meet their deadlines.
I.Manages all paperwork, documentation, written reports, etc. and assures these are always submitted on time and that they are accurate, complete and organized.
J.Maintains and updates required files, manuals, and reports.
NON-ESSENTIAL FUNCTIONS: The "non-essential" functions are routinely performed by the person holding the Shift Manager's position and they are essential to the effective operation of the restaurant. However, these functions are considered "non-essential" to the position. The Manager on Duty is then accountable for assuring the delegated functions are correctly performed.
A.Receives and stores inventory items used in the unit. This involves these processes:
1. Checking in products as received off delivery vehicles to verify product quality and that amount charged for on the delivery receipt/packing slip is correct when compared to amount received. Signing the delivery receipt/packing slips for amount of goods received.
2. Using a two-wheeled hand truck, assists and oversees other employees in proper storage of products. Weight of items varies. Generally, more than one person is available to perform this task.
3. Entering on inventory screen of the computer the amount and cost of each product item received as noted on the delivery receipt/packing slip.
MINIMUM QUALIFICATIONS/REQUIREMENTS: The following are the qualifications and minimum requirements necessary for a person to perform this job.
A.Ability to work a minimum of three (3) days and at least 30 hours per week, but must be available to work more than 30 hours per week if necessary due to business necessity. In addition to having the flexibility to work a variety of shifts, including late nights and weekends.
B.Valid driver's license, insurance and automobile. Position involves taking large amounts of cash receipts to the bank at different times of the day including at night. Banks are generally at a distance requiring a person to drive to the bank. Position may also need automobile to pick up product, make pizza deliveries, etc.
C.Able and willing to travel. Position requires occasional travel for training, new store openings and meetings, which may be held at a distance from home not feasible to drive daily. Overnight stays at an out-of-town location may be required during the training sessions, new store opening, and meetings for up to one week at a time.
D.Telephone (cellular or land line) at residence. There are circumstances that may arise at the restaurant of which the manager must be informed while off duty.
E.Sufficient physical agility to perform the functions of the position. This includes these processes:
1. Sufficient physical strength to lift most items used in the operation of the restaurant.
2. Sufficient communication skills. Position involves communicating with team members, superiors and customers.
3. Ability to move at a fairly quick pace and to remain stationary for periods of six to eight hours at a time. The position requires person to perform all of the above at different times and intervals as needed by the realities of the environment and the position.
F.Ability to maintain a state of self-composure under conditions of stress and anxiety. Position routinely involves stress resulting from work overload, role ambiguity, conflicting demands from various customers, and team members. Person in this position must be able to function effectively under these conditions.
G.Previous experience with this Company as a Shift Manager/Leader; or previous restaurant management experience with another Company.
H.Sufficient mental and cognitive ability to perform the calculations and fill in the sales and product tracking forms used by the Company. Estimate is that ability to read, write and perform arithmetic procedures at the 12th grade level will be sufficient.
I.Ability to perform all of the duties of the hourly team members and supervisors under this person's supervision. As time and circumstances dictate the person in this position may have to assist or take over the duties of an hourly team member in order to expedite good customer service. Also necessary in order to train new team members in this function.
J.Ability to communicate effectively with a large variety of persons with diverse backgrounds. Position is one where incumbent provides direction and supervision to a variety of subordinates with diverse levels of education, differences in ages, and experience. Must be able to express ideas and concepts to these persons to assure teamwork through organization and leadership.
EQUIPMENT USED:
Standard restaurant office equipment such as calculator, telephone, and computer.
"Pizza Wheel". This is a device with a handle and a round stainless steel blade that is used to cut certain types of pizza dough crusts.
"Rocker Knife". This is a device about two feet long with a stainless steel handle that extends across the top of a stainless steel blade fashioned in a curve. It is used to cut certain types of pizzas by placing on the pizza and rocking the blade across the pizza surface.
"Vegetable Chopper". This is a hand operated mechanical device used to slice whole raw vegetables into smaller pieces for use on the make table.
"Crock". A generic term used to describe a variety of containers used to hold food items served on a salad bar. Knives, spoons, spatulas and other common utensils.
"Make Table". An open topped, refrigerated, compartmented table for the storage of food items used in the preparation of products for customer orders. Has doors which allow access to interior refrigerated section below the table top where additional food items are stored as back-up for the items stored on top of the table.
"Cut Table". A stainless steel table where cooked pizzas are cut into slices and where other products are assembled prior to serving them to the customer.
"Oven". A power driven device operating at high temperatures used to bake food products.
"Automatic Dishwasher". A mechanical device consisting of: (1) a dirty dish/rinse table, used to rinse and prepare dishes for washing; (2) dishwasher compartment, where dishes are washed with hot water, soap, sanitizing chemical and pressurized water; and, (3) clean dish/drain table, where clean dishes drain, dry and are sorted for storage.
"Dough Proofer". A metal cabinet heated to approximately 95 degrees Fahrenheit, in which panned dough is placed to obtain the correct rise in the dough.
"Three Compartment Sink". A stainless steel sink, separated into three compartments used to wash, rinse and sanitize all kitchen tools, and smallwares not washed in the automatic dishwasher.
"Pan Gripper". This is a mechanical device used to grip certain types of pizza pans for purposes of lifting or carrying when they have been heated to a high temperature.
"Portion Cups". These are pre-measured cups used by Pizza Hut restaurants for portioning cheese and toppings for pizzas.
"Scales". This is a small table model scale used to weigh and portion ingredients used in the recipes of various products.
"Pan Separators". These are plastic items, of varying shape, diameter and circumference, used to separate pans filled with dough to protect the dough inside the pan from contamination and to allow pans to be stacked for storage.
"Dough Perforator". This is a mechanical device consisting of a handle attached to a small wheeled drum that is dotted with metal protrusions. It is used to perforate certain types of dough prior to topping to prevent formation of bubbles during baking.
"Cutting Board". This is a hard surface board, rectangular or square in shape, on which pizzas and other food products are cut.
"Reach In". A refrigerated piece of equipment with doors which open to allow dough or pizza ingredients to be stored inside for easy access.
"Scraper Block". A device with a stainless steel blade and a wooden handle in a rectangular shape used to cut dough for portioning, and scraping the make table/cut table surfaces off for cleaning.
"Prep Table". A table about 34 to 36 inches high, with a stainless steel top. The table is used as a work surface for the preparation of many ingredient items used in the Pizza Hut.
“Kitchen and Dining Utensils". Such as knives, spoons, spatulas, etc.
"Plates, Bowls, Mugs, Tumblers". and other items to serve food and beverages to customers.
"Spoon". A stainless steel device with a long handle and a curved end used for applying sauce to prepared dough.
"Pan". A round metal device with a raised edge for holding dough prior to topping and baking.
"Walk-in". A refrigerated compartment of sufficient size to allow the individual to actually walk into the refrigerated compartment to obtain or store perishable items. Compartment may be sufficiently cold to freeze items.
"Freezer". A refrigerated box maintained at sufficient cold temperatures so as to freeze items stored inside.
"Ice Machine". A device that automatically receives water, freezes it, and stores it as ice in an attached storage bin.
"Soda Dispenser" (pop machine). A device that mixes syrup and carbonated water and dispenses carbonated soft beverage (soda, pop).
"Point of Sale Computer". Electronic device used in tracking orders, inventory, payroll information. Contains cash drawer used to make change for customer transactions, track paidouts, delivery orders, dispatching.
"FMS" Field Management System. Software used on the point of sale computer that provides management information necessary in managing the day to day operations of the restaurant.
Miscellaneous equipment such as a telephone, carry-out boxes and bags, hand towels, etc.
Serving tray, ticket book, bus tub, flatware and other small items.
Note: Many restaurants have additional equipment such as beer boxes, spaghetti magic machine, etc.
PLACES WHERE WORK IS PERFORMED: This work is performed on the employer's premises. Location of premises may vary throughout the employer's Company. This job description was developed by observing the work in process and from information provided by the management of Daland Corporation.
$13.00/hour
Ages 18+
As a seasonal Associate Housing Cleaning Attendant, you will be responsible for cleaning and organizing associate housing areas. You’ll also:
- Maintain cleanliness of public spaces by picking up litter and trash.
- Ensure cleanliness of all hallway areas throughout the dormitory building by sweeping and mopping floors.
- Establish cleanliness in restroom areas throughout the dormitory building by sanitizing sinks, toilets, and showers.
Some of our amazing perks and benefits:
- Paid training and FREE uniforms!
- FREE Admission to Kings Dominion and other Six Flags parks!
- FREE tickets and discounts to local attractions!
- FREE tickets for family and friends!
- Discounts on food and merchandise!
- Employee-only ride nights, game nights, and FREE FOOD events!
Responsibilities:
As a member of our team, you’ll also…
- Work with chemicals in accordance with all safety guidelines listed on the safety data sheets (SDS). Uses cleaning equipment in accordance with the departmental safety guidelines. Utilizes personal protective equipment (PPE) as necessary
- Cleans and maintains common areas of the Associate housing building
- Provides guest service according to Six Flags standards when serving the guest or working with subordinates, including initiating guest interactions, answering questions and giving directions.
Qualifications:
- You!
- Ability to perform physical and repetitious tasks including pushing, pulling, lifting and gripping.
- Previous experience in hotel housekeeping preferred but not required.
- People who love helping others and will support the needs of our guests and associates.
- Good judgement and a commitment to safety.
- Ability to work and interact with people from diverse backgrounds.
- Individuals with a passion and excitement about Kings Dominion.
- Availability to include some weekdays, weekends, evenings, and holidays.
Find your calling at Mercy!
The Registered Nurse, utilizing theoretical concepts as a basis for decisions in practice will assess, plan, implement and evaluate individualized nursing care in accordance with standards of nursing practice for adult/geriatric patients. Candidate must report to facilities within the regional footprint of the home hospital where they are employed. Determination of facilities to be discussed upon hire into position with approval by hiring leader/leadership team.
Position Details:
MERCY HOSPITALS: Mercy Washington and Surrounding Communities
Department: Regional Float Pool
Status: Part Time (24 hours per week)
Shift: Nights
#BeAMercyNurse
Incentives:
- Sign-On Bonus: $10,000 - No Contract
- Base Pay (Determined by Experience)
- PLUS Regional Float Pool Perk AND Shift Differentials: $2.75/Evenings, $4.60/Nights, $1.50/Weekends
- Benefits: Day-One Comprehensive Medical, Vision & Dental Insurance
- Stay Premium Program: Active after 2 years with Mercy. Up to $8/hour based on years of Mercy service
- Retirement: 401(k) Employer-Matched Retirement Funds
- Referral Bonus Opportunity
- Education Assistance:
- Tuition Reimbursement $2,000 per year
- ASN to BSN (Up to $16,000)
- PTO/Vacation Time
Overview:
Join Mercy's Regional Float Pool and bring your expertise to multiple hospitals across the St. Louis region. This is a fantastic opportunity for experienced RNs who thrive in dynamic environments and enjoy continuous learning.
Why Join the Float Pool?
- Strengthen your clinical assessment and critical thinking skills
- Collaborate with diverse care teams and patient populations
- Experience flexibility and variety in your daily work
Units You May Float To:
- Medical/Surgical (Med/Surg):
- Orthopedics (Ortho), Trauma, Surgery, Oncology, Neuro, Medical, Surgical
- Telemetry (Tele):
- Cardiac, Surgical, Medical
- Stepdown (SD):
- Medical (Med SD), Surgical (Surg SD), Trauma, Neuro, Cardiac
- Intensive Care – ICU:
- CVICU (Cardiac Vascular ICU), Trauma ICU, Burn ICU, Surgical ICU, Neuro ICU
- And more!
Facilities You'll Serve (Min of 3 assigned) :
- Mercy St. Louis - St. Louis, MO
- Mercy Jefferson - Festus, MO
- Mercy South - South St. Louis County, MO
- Mercy Washington - Washington, MO
- Mercy Lincoln - Troy, MO
- Mercy Perry - Perryville, MO
- Mercy Southeast - Cape Girardeau, MO
- Mercy Stoddard - Dexter, MO
Qualifications:
- Required Education:
- Graduate of an accredited registered professional nursing program.
- Preferred Education: BSN
- Licensure:
- Is personally responsible for obtaining, and maintaining, a current RN license within the hiring state and/or compact licensure in which nursing duties are performed and must meet all state board of nursing requirements.
- REQUIRED Experience:
- One year of recent bed-side RN experience to work Med Surg.
- For all other specialties (ICU, etc.) a minimum of two years of recent bed-side RN experience.
- Preferred Experience: Epic experience
- Certifications (Must have to start):
- For Med Surg and Behavioral Health - BLS
- For Critical Care (CC) - BLS, ACLS
- Physical Requirements/Demands:
- Stand/Walk most of the time on duty; significant amount of bending and stooping, as well as lifting and turning patients with assistance; push/pull/grip up to 50 pounds
Why Mercy?
From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
Find your calling at Mercy!
The Registered Nurse, utilizing theoretical concepts as a basis for decisions in practice will assess, plan, implement and evaluate individualized nursing care in accordance with standards of nursing practice for adult/geriatric patients. Candidate must report to facilities within the regional footprint of the home hospital where they are employed. Determination of facilities to be discussed upon hire into position with approval by hiring leader/leadership team.
Position Details:
MERCY HOSPITALS: Mercy South and Surrounding Communities
Department: Regional Float Pool
Status: Part Time (24 hours per week)
Shift: Nights
#BeAMercyNurse
Incentives:
- Sign-On Bonus: $10,000 - No Contract
- Base Pay (Determined by Experience)
- PLUS Regional Float Pool Perk AND Shift Differentials: $2.75/Evenings, $4.60/Nights, $1.50/Weekends
- Benefits: Day-One Comprehensive Medical, Vision & Dental Insurance
- Stay Premium Program: Active after 2 years with Mercy. Up to $8/hour based on years of Mercy service
- Retirement: 401(k) Employer-Matched Retirement Funds
- Referral Bonus Opportunity
- Education Assistance:
- Tuition Reimbursement $2,000 per year
- ASN to BSN (Up to $16,000)
- PTO/Vacation Time
Overview:
Join Mercy's Regional Float Pool and bring your expertise to multiple hospitals across the St. Louis region. This is a fantastic opportunity for experienced RNs who thrive in dynamic environments and enjoy continuous learning.
Why Join the Float Pool?
- Strengthen your clinical assessment and critical thinking skills
- Collaborate with diverse care teams and patient populations
- Experience flexibility and variety in your daily work
Units You May Float To:
- Medical/Surgical (Med/Surg):
- Orthopedics (Ortho), Trauma, Surgery, Oncology, Neuro, Medical, Surgical
- Telemetry (Tele):
- Cardiac, Surgical, Medical
- Stepdown (SD):
- Medical (Med SD), Surgical (Surg SD), Trauma, Neuro, Cardiac
- Intensive Care – ICU:
- CVICU (Cardiac Vascular ICU), Trauma ICU, Burn ICU, Surgical ICU, Neuro ICU
- And more!
Facilities You'll Serve (Min of 3 assigned) :
- Mercy St. Louis - St. Louis, MO
- Mercy Jefferson - Festus, MO
- Mercy South - South St. Louis County, MO
- Mercy Washington - Washington, MO
- Mercy Lincoln - Troy, MO
- Mercy Perry - Perryville, MO
- Mercy Southeast - Cape Girardeau, MO
- Mercy Stoddard - Dexter, MO
Qualifications:
- Required Education:
- Graduate of an accredited registered professional nursing program.
- Preferred Education: BSN
- Licensure:
- Is personally responsible for obtaining, and maintaining, a current RN license within the hiring state and/or compact licensure in which nursing duties are performed and must meet all state board of nursing requirements.
- REQUIRED Experience:
- One year of recent bed-side RN experience to work Med Surg.
- For all other specialties (ICU, etc.) a minimum of two years of recent bed-side RN experience.
- Preferred Experience: Epic experience
- Certifications (Must have to start):
- For Med Surg and Behavioral Health - BLS
- For Women's Health - BLS & NRP
- Physical Requirements/Demands:
- Stand/Walk most of the time on duty; significant amount of bending and stooping, as well as lifting and turning patients with assistance; push/pull/grip up to 50 pounds
Why Mercy?
From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
Minimum Requirements:
Education: Graduated from a school of nursing (Associate's Degree, Diploma, or BSN).
Licensure: Is personally responsible for obtaining, and maintaining, a current RN license within the hiring state and/or compact licensure in which nursing duties are performed and must meet all state board of nursing requirements.
Experience: Six months OR experience. Proficient in Level I requirements as defined per policy.
Certifications: Basic Life Support certification through the American Heart Association or successful completion of course within 30 days of hire.
One or more of the certifications below may be required based on the position/unit hired to, or acquisition of certification within department required timeframe:
- ACLS (Advanced Cardiac Life Support)
- NRP (Neonatal Resuscitation Program)
- ENPC (Emergency Nursing Pediatric Course)
- TNCC (Trauma Nursing Core Course)
- CPHON (Certified Pediatric/Hematology/Oncology Nurses)
- OCN (Oncology Certified Nurse)
- BLS (Basic Life Support)
- PALS (Pediatric Advanced Life Support)
- PEARS (Pediatric Assessment Recognition and Stabilization)
- S.T.A.B.L.E. (Sugar, Temperature, Airway, Blood Pressure, Lab Work, And Emotional Support) Six Assessment & Care Modules
- C-EFM (Fetal Monitor Certification)
- Other unit-specific certifications as required
Physical Requirements:
• Position requires the ability to push, pull, and/or lift 50 lbs. on a regular basis.
• Position requires prolonged standing and walking during each shift.
• Position requires the ability to grip, reach, bend, kneel, twist, and squat to perform duties.
From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
Qualifications:
Education: Graduated from a school of nursing (Associate's Degree, Diploma, or BSN).
Licensure: Is personally responsible for obtaining, and maintaining, a current RN license within the hiring state and/or compact licensure in which nursing duties are performed and must meet all state board of nursing requirements.
Experience:
Certifications:
- Basic Life Support certification through the American Heart Association or successful completion of course within 30 days of hire.
One or more of the certifications below may be required based on the position/unit hired to, or acquisition of certification within department required timeframe:
- ACLS (Advanced Cardiac Life Support)
- NRP (Neonatal Resuscitation Program)
- ENPC (Emergency Nursing Pediatric Course)
- TNCC (Trauma Nursing Core Course)
- CPHON (Certified Pediatric/Hematology/Oncology Nurses)
- OCN (Oncology Certified Nurse)
- BLS (Basic Life Support)
- PALS (Pediatric Advanced Life Support)
- PEARS (Pediatric Assessment Recognition and Stabilization)
- S.T.A.B.L.E. (Sugar, Temperature, Airway, Blood Pressure, Lab Work, And Emotional Support) Six Assessment & Care Modules
- C-EFM (Fetal Monitor Certification)
- Other unit-specific certifications as required
Physical Requirements:
• Position requires the ability to push, pull, and/or lift 50 lbs on a regular basis.
• Position requires prolonged standing and walking during each shift.
• Position requires the ability to grip, reach, bend, kneel, twist, and squat to perform duties.
From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
Education: Graduated from a school of nursing (Associate's Degree, Diploma, or BSN).
Licensure: Is personally responsible for obtaining, and maintaining, a current RN license within the hiring state and/or compact licensure in which nursing duties are performed and must meet all state board of nursing requirements.
Physical requirements/demands:
- Position requires individuals to push, pull, and/or lift 50 pounds on a regular basis
- Position requires prolonged standing and walking each shift
- Position requires the ability to grip, reach, bend, kneel, twist, and squat to perform duties
Experience:
Certifications: WCC/WOCN certification
Other: Responsible and accountable for prescribing, delegating and coordinating the nursing care provided to a select group of patients for wound and ostomy care within the context of the organizations and nursing services. Wound care nurses specialize in the proper management of wound care by treating and monitoring wounds that are the result of disease, injury, or medical treatments. The job requires that a wound care nurse provides care that will optimally and safely manage various types of wounds, including but not limiting surgical openings, ulcers, decubitus ulcers, feeding tube sites, and abscesses. Their work requires that they assess the wounds, create and implement treatment plans, monitor infections and signs of various infections, and clean wounds. The nurses must also have advanced skills to assess symptoms of complex wounds. Wound care nurses will also educate other healthcare members in the area of proper wound care.
Preferred Education:
Preferred Licensure:
Preferred Experience:
Preferred Certifications:
Preferred Other:
From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
keyword(s): Wound Care, Ostomy, Ardmore, Nursing, RN
Wound Care, Ostomy, Ardmore, Nursing, RN
We are a 25-bed swing-bed/med-surg unit that works to restore patients to their highest level of independence in preparation to return home after hospitalization. We are a multi-disciplinary team that strives to bring that personal touch to healthcare, and serve the rural area of Kingfisher, Oklahoma.
Sign-On Bonus Incentives
New Grad: $10,000
Experienced (1+ years): $20,000Position Details:
Qualifications:
Education: Graduated from a school of nursing (Associate's Degree, Diploma, or BSN).
Licensure: Is personally responsible for obtaining, and maintaining, a current RN license within the hiring state and/or compact licensure in which nursing duties are performed and must meet all state board of nursing requirements.
Physical requirements/demands:
- Position requires individuals to push, pull, and/or lift 50 pounds on a regular basis
- Position requires prolonged standing and walking each shift
- Position requires the ability to grip, reach, bend, kneel, twist, and squat to perform duties
Certifications: Basic Life Support certification through the American Heart Association or successful completion of course within 30 days of hire.
One or more of the certifications below may be required based on the position/unit hired to, or acquisition of certification within department required timeframe:
- ACLS (Advanced Cardiac Life Support)
- NRP (Neonatal Resuscitation Program)
- ENPC (Emergency Nursing Pediatric Course)
- TNCC (Trauma Nursing Core Course)
- CPHON (Certified Pediatric/Hematology/Oncology Nurses)
- OCN (Oncology Certified Nurse)
- BLS (Basic Life Support)
- PALS (Pediatric Advanced Life Support)
- PEARS (Pediatric Assessment Recognition and Stabilization)
- S.T.A.B.L.E. (Sugar, Temperature, Airway, Blood Pressure, Lab Work, And Emotional Support) Six Assessment &Care Modules
- C-EFM (Fetal Monitor Certification)
- Other unit specific certifications as required
From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
Registered Nurse - Respiratory
Full Time Days
36 hours/week - Monday-Friday
$10,000 Sign on Bonus Available
Qualifications:
Education: Graduated from a school of nursing (Associate's Degree, Diploma, or BSN).
Licensure: Is personally responsible for obtaining, and maintaining, a current RN license within the hiring state and/or compact licensure in which nursing duties are performed and must meet all state board of nursing requirements.
Certifications: Basic Life Support certification through the American Heart Association or successful completion of course within 30 days of hire. ACLS required.
Physical Requirements: Position requires the ability to push, pull, and/or lift 50 lbs on a regular basis. Position requires prolonged standing and walking during each shift. Position requires the ability to grip, reach, bend, kneel, twist, and squat to perform duties.
Preferred: Inpatient experience, preferably ICU, stepdown or ER, but will consider several years of floor experience.
Why Mercy?From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
Enjoy day-one benefits: Comprehensive medical, dental, and vision coverage; generous PTO (up to 24 days your first year, growing to 34 with tenure and rollover up to 440 hours); paid parental leave; 401(k) with employer match; $100/month Dependent Care FSA contribution; paid volunteer time; free parking; and career advancement opportunities.
Education & Loan Assistance:
• $10,000 Scholar Loan Program (LPN to RN)
• $20,000 RN Loan Forgiveness
• $16,000 RN to BSN AssistancePosition Details:Registered Nurse (RN) – Med Surg 5W
New Grads and Experienced Nurses Welcome!
Location: Mercy Hospital South - 10010 Kennerly Rd, St. Louis, Missouri 63128
Schedule: Full-Time | 36 hours/week
Shift: Night Shift | 7:00PM-7:30AM
Sign-On Bonus:
- Experienced Nurses: Up to $10,000
- New Graduate Nurses (less than 1 year of experience): Up to $5,000
About the Unit — Med Surg 5W
Med Surg 5W cares for adult medical patients with diagnoses such as small bowel obstructions, respiratory infections, cellulitis, diverticulitis, and pneumonia. This unit provides an excellent environment to strengthen core Med Surg skills, enhance assessment abilities, and manage patients with diverse medical needs.
Overview
Utilizes the nursing process to provide patient care. Maintains professional accountability for provision of patient care for the assigned patients. Evaluates the overall effectiveness of care provided by other direct care givers. Coordinates the patient care in conjunction with other departments. Maintains patient rights and confidentiality of patient information. Performs duties and responsibilities in a manner consistent with our mission, values, and mercy service standards.
Qualifications
Education: Graduate of an accredited school of nursing with one of the following:
- Associate Degree in Nursing
- Nursing Diploma
- Bachelor of Science in Nursing (BSN)
Licensure: Must hold and maintain a current Registered Nurse (RN) license in the state of Missouri or possess compact licensure, in accordance with state board of nursing regulations.
Experience: Previous hospital experience is preferred and may be required depending on the unit.
Certifications:
- Required: Basic Life Support (BLS) certification through the American Heart Association, or completion within 30 days of hire.
Preferred Qualifications
- Education: BSN preferred
- Licensure: Additional state licensure or specialty certifications preferred
- Experience: Prior experience in specialty area or similar clinical setting
Physical Requirements
- Ability to push, pull, and lift up to 50 lbs regularly
- Prolonged standing and walking throughout the shift
- Ability to grip, reach, bend, kneel, twist, and squat as needed to perform nursing duties
From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
keyword(s): Registered Nurse
RN
Acute Care
Acute Care RN
Staff Nurse
Inpatient RN
Medical Surgical
Med Surg
Nurse Hiring
Sign-on Bonus
Loan Assistance
Tuition Reimbursement
Nursing Career
New Grad RN
Experienced RN
Sign on bonus
Missouri
Utilizes the nursing process to provide patient care. Maintains professional accountability for provision of patient care for the assigned patients. Evaluates the overall effectiveness of care provided by other direct caregivers. Coordinates the patient care in conjunction with other departments. Maintains patient rights and confidentiality of patient information. Performs duties and responsibilities in a manner consistent with our mission, values, and Mercy Service Standards.Position Details:
MERCY HOSPITAL Mercy Perry
Department: GIG
Status: PRN/Per Diem/Flex/Float
Shift: Various Shifts Available
#BeAMercyNurse
Incentives:
$40/hour + Variable Shift Incentive
W-2 Employee
Minimum 12 hours every 90 days
Maximum 30 hours a week (Sun-Sat)
4, 8, or 12 hour shifts available
Variable Shift Incentives
Work Where and When You Want!
Overview:
Are you seeking a flexible incentivized Registered Nurse position? Ability to pick up day shift OR night shift- whatever works best for you! No weekend, holiday, or shift requirement. Participation in the Gig Nursing Program requires being responsible for scheduling a minimum number of hours, being available on short notice, being flexible and subject to last minute shift cancellation. The Gig Nursing Program does not offer guaranteed shift hours and will be the first for cancellation.
Departments Utilizing GIG RNs:
- Behavioral Health (BH)
- Emergency Department (ED)
- Intensive Care Unit (ICU)
- Medical-Surgical (MS)
- Women's Health (L&D, M&B)
Facilities/Locations:
- Mercy St. Louis - St.Louis, MO
- Mercy Jefferson - Festus, MO
- Mercy South - South St. Louis County, MO
- Mercy Washington - Washington, MO
- Mercy Lincoln - Troy, MO
- Mercy Perry - Perryville, MO
- Mercy Southeast - Cape Girardeau, MO
- Mercy Stoddard - Dexter, MO
Qualifications:
Required Education:
Graduate of an accredited registered professional nursing program
Preferred Education: BSN
Licensure:
Is personally responsible for obtaining, and maintaining, a current RN license within the hiring state and/or compact licensure in which nursing duties are performed and must meet all state board of nursing requirements.
Experience:
One year of recent bed-side RN experience to work Med Surg.
For all other specialties (ED, ICU, etc.) a minimum of two years of recent specialty specific bed-side RN experience.
Preferred Experience: Epic experience
Certifications:
For Med Surg, Behavioral Healthand Women's Health (L&D, NICU, M&B) - BLS
For Critical Care (CC) - BLS, ACLS
For Emergency Department (ED) - BLS, ACLS, & PALS
Additional Certifications may be required after start
Physical requirements/demands:
Position requires individuals to push, pull, and/or lift 50 pounds on a regular basis
Position requires prolonged standing and walking each shift
Position requires the ability to grip, reach, bend, kneel, twist, and squat to perform duties
Why Mercy?From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
Utilizes the nursing process to provide patient care. Maintains professional accountability for provision of patient care for the assigned patients. Evaluates the overall effectiveness of care provided by other direct caregivers. Coordinates the patient care in conjunction with other departments. Maintains patient rights and confidentiality of patient information. Performs duties and responsibilities in a manner consistent with our mission, values, and Mercy Service Standards.Position Details:
MERCY HOSPITAL Mercy Washington
Department: GIG
Status: PRN/Per Diem/Flex/Float
Shift: Various Shifts Available
#BeAMercyNurse
Incentives:
$40/hour + Variable Shift Incentive
W-2 Employee
Minimum 12 hours every 90 days
Maximum 30 hours a week (Sun-Sat)
4, 8, or 12 hour shifts available
Variable Shift Incentives
Work Where and When You Want!
Overview:
Are you seeking a flexible incentivized Registered Nurse position? Ability to pick up day shift OR night shift- whatever works best for you! No weekend, holiday, or shift requirement. Participation in the Gig Nursing Program requires being responsible for scheduling a minimum number of hours, being available on short notice, being flexible and subject to last minute shift cancellation. The Gig Nursing Program does not offer guaranteed shift hours and will be the first for cancellation.
Departments Utilizing GIG RNs:
- Behavioral Health (BH)
- Emergency Department (ED)
- Intensive Care Unit (ICU)
- Medical-Surgical (MS)
- Women's Health (L&D, M&B)
Facilities/Locations:
- Mercy St. Louis - St.Louis, MO
- Mercy Jefferson - Festus, MO
- Mercy South - South St. Louis County, MO
- Mercy Washington - Washington, MO
- Mercy Lincoln - Troy, MO
- Mercy Perry - Perryville, MO
- Mercy Southeast - Cape Girardeau, MO
- Mercy Stoddard - Dexter, MO
Qualifications:
Required Education:
Graduate of an accredited registered professional nursing program
Preferred Education: BSN
Licensure:
Is personally responsible for obtaining, and maintaining, a current RN license within the hiring state and/or compact licensure in which nursing duties are performed and must meet all state board of nursing requirements.
Experience:
One year of recent bed-side RN experience to work Med Surg.
For all other specialties (ED, ICU, etc.) a minimum of two years of recent specialty specific bed-side RN experience.
Preferred Experience: Epic experience
Certifications:
For Med Surg, Behavioral Healthand Women's Health (L&D, NICU, M&B) - BLS
For Critical Care (CC) - BLS, ACLS
For Emergency Department (ED) - BLS, ACLS, & PALS
Additional Certifications may be required after start
Physical requirements/demands:
Position requires individuals to push, pull, and/or lift 50 pounds on a regular basis
Position requires prolonged standing and walking each shift
Position requires the ability to grip, reach, bend, kneel, twist, and squat to perform duties
Why Mercy?From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
PURPOSE OF THE POSITION: The person holding this supervisory position is considered a part time team member and is responsible and accountable for: the daily operation of the restaurant, assisting the RGM with hiring and training team members, directing the activities of team members, and rewarding or disciplining team members in consultation with the RGM; and, performing these functions in ways that assure compliance with all Company policies and procedures, customer satisfaction, a high level of team member morale and the attainment of sales and profit objectives. The Shift Manager reports directly to the RGM, and holds the second highest position in the restaurant if there is not an Assistant Manager. In restaurants with an Assistant Manager, the Shift Manager is the next highest position.
ESSENTIAL FUNCTIONS: The following accountabilities are essential to this position and a high degree of performance must be achieved in each in order for the incumbent to be successful. These accountabilities are organized according to our six Key Result Areas.
When the word "policies" or the phrase "policies and procedures" or similar language is used in any of the Company's documents, the term refers to all policy and procedure bulletins, manuals, training materials, memoranda, newsletters, communications on the “Document Viewer” on the computer, and all other documents and oral discussions with team members' supervisors, which relate to the restaurant. The management team shall be responsible for ensuring that all team members, including the manager himself/herself, comply with all Company policies and procedures and all Pizza Hut standards at all times and take immediate steps to correct actions not in accordance with such policies, procedures and standards.
I. PROFITABILITY
A.Planning
1.Executes the RGM’s plans and overall Daland Corporation plans to achieve consistent sales growth and profit growth.
2.Achieves planned/budgeted profits, as communicated by the RGM. This involves:
- a.Using established control systems and procedures to measure actual results and to identify deviations from planned results.
- b.Assisting the RGM, as requested, in developing and implementing corrective action plans to assure actual results conform to plan.
B.Policies: Complies with all Company policies and procedures, including but not limited to, those relating to inventory, cash, payroll, food handling, interactions with guests, team members, and vendors, and legal compliance.
C.Manages and Controls Cash: In conjunction with the RGM and other managers, ensures that that all cash and checks, minus the change fund is correctly deposited, credit card transactions are correctly settled, and cash over or short is minimized.
1. Performs Banking Transactions
- a. Assures that two deposits daily are prepared and deposited in the bank (more than two may be required in higher volume units.)
- i. The intent of the first deposit is to remove from the unit an amount approximately equal to the total of cash plus checks, minus the amount of the change fund.
- ii. The first deposit is to be made after 4:00 p.m., when the opening manager is ready to leave for the day.
- iii. The final deposit will be all remaining cash plus checks, minus the change fund.
- iv. The managers may take such deposits to the bank, using his/her personal vehicle, and depending on the time of day, make the deposit in the bank lobby or in the night depository.
- v. Assure the “Weekly Deposit Log” is completed for each deposit made.
- b. If requested by the RGM, the other managers shall perform the following tasks. These are the responsibility of the RGM, but may be delegated to other managers.
- i. Picks up validated deposit slips at the bank.
- ii. Verifies bank validated deposit amounts to sales and cash reports as well as the “Weekly Deposit Log,” and assures all appropriate signatures are on the “Weekly Deposit Log”.
- iii. Sends a copy of the “Weekly Deposit Log” to the Home Office with all other weekly paperwork.
D.Controls cash drawers and team member “banks”, following all established manual and computer procedures.
1. Establishes the correct number of cash drawers. Number of cash drawers in use at one time may vary from one to four depending on size of the restaurant, sales volume, method of delivering services to customer. Amount of cash in each drawer is recorded and kept in the drawer for the duration of the shift, or until “dropped” from the cash drawer to the safe.
2. Establishes cash banks for delivery drivers.
3. As needed, will operate cash drawer following established procedures for cash drawer operation.
4. As necessary, money is removed from cash drawers from time to time and secured in the safe.
5. Throughout the shift, cash drawer transactions, such as paid outs, miscellaneous receipts (paid ins), discounts and promotions are properly accounted for, including all documentation; transactions are properly entered into the computer; and, all documentation is organized and secured for transmitting to the Home Office.
6. Assures cash drawers are counted and balanced at the end of each shift or when there is a change in cashiers.
7. Records tips for servers and drivers on credit card/gift card transactions and correctly settles all credit card/gift card transactions.
8. Inform the RGM anytime cash short exceeds $5 for a day.
9. Reviews reports and otherwise takes actions to ensure that team members properly report actual sales and actual tips, and ensures that team members do not falsify credit card receipts or other Company documents. This requires due diligence on the part of the managers.
E.Assists the RGM in Managing and Controlling Cost of Sales: The actual cost per the P&L must be equal to or between Ideal Cost and Allowable Cost as calculated in the Product Cost Analysis report and Bonus Calculation Sheet. This includes these processes:
1.Utilizes manuals and/or automated procedures approved by the Company, orders all approved products used in the restaurant.
2.Properly accepts deliveries and properly stores inventory items used in the restaurant. This involves these processes:
- a.Checks in products as received off of delivery vehicles to verity product quality and verifies that amounts charged for on delivery receipt/packing slips are for amount of goods received.
- b.Uses a two-wheeled hand truck to unload and products, assists and oversees other team members in proper storage of products. Weight of items varies from 10 to 50 pounds. Full load on two-wheeled hand truck may exceed 500 pounds. Generally, ensures that more than one person is available to perform this task.
- c.“Autoposts” inventory received, or enters on inventory record the amount and cost of each product item received, as noted on delivery receipt/packing slip.
3.Accurately accounts for all product coming into the restaurant, used to prepare products, or transferred out of the restaurant.
4.Assures the proper execution of all recipes and specifications for preparing ingredients and assembling products.
5.Manages waste which involves maintaining a FIFO (First In, First Out) system and marking all products with a Made – Ready – Discard label.
6.Assures the correct order entry procedures are followed by all order takers.
7.Assures compliance with team member consumption policies.
8.Performs a Daily Product Usage Analysis on critical inventory items to assure usage meets guidelines.
9.Communicates goals to team members and follows up with team members to ensure goals are being met.
10.The following tools are used to aid in controlling Cost of Sales:
- FMS Product Cost Analysis Report
- FMS Daily Ideal Usage Report
- FMS Weekly Worksheet Report
- Bonus Calculation Sheet
- Profit and Loss Statement
- The General Ledger
- Prep Variance Report
- Daily Prep Variance Report
F.Assists the RGM in Managing and Controlling Cost of Labor: Ensures that “Flow-thru” targets/goals are achieved; actual hours used do not exceed the established labor model/matrix; and, team member productivity is maximized. This includes these processes:.
1.Ensuring the accuracy and completeness of team member timekeeping records, including tips and team member meals. Updates team member records as needed.
2. Minimizing edits to clock-in/clock-out transactions by assuring team members properly clock in at the beginning of their shift and clock out at the end of their shift.
3. Assuring team members do not clock in earlier than five (5) minutes prior to their scheduled shift.
4. Assuring the man-hours used for opening and closing the restaurant do not exceed established targets.
5.Analyzing actual labor hours used versus earned allowable labor hours and calculating the variance; and, using this information to appropriately manage labor each shift.
6.Communicating and cooperating with the Home Office Payroll Department to assure accuracy in payroll, including information about new hires, raises, promotions, and terminations.
7.Making appropriate recommendations to the RGM regarding wages within Company guidelines.
8.Eliminating overtime hours for team members who are paid on an hourly basis.
9.Eliminating supplemental tip credit pay.
10.Improving team member productivity using the measurements and tools available through the Company, as well as the following:
- Assuring the Back of the House (BOH) is “optimized”:
- i. Organized … a place for everything, and everything in its place
- ii. Lineal Flow … eliminate or minimize back tracking
- iii. Have all items located closest to the next step in the product assembly process
- iv. Minimize the number of steps taken and the reach needed for all items
- Assuring that team members are thoroughly trained.
- Ensuring that “prep levels’ are adequate for the forecasted volume of business for the day, including: products thawing/tempering; raw product prep; preassembled pizza and other products; and so on.
- Ensuring that food preparation areas, make table, cut table, and service areas are stocked appropriately before each shift and maintained during peak volume periods.
- Ensuring products are prepared quickly in accordance with time standards.
- Ensuring that tables vacated by customers are cleared, cleaned, sanitized and reset quickly.
11. Reduces turnover by managing all aspects of the restaurant professionally and in accordance with Company standards.
12. If the RGM has delegated scheduling to the Shift Manager, the Shift Manager uses established procedures to produce a sales forecast to be used in the scheduling process.
G.Managing Other Operating Expenses and Semi-Variable Expenses to Budget or less.
II. CUSTOMER SATISFACTION
A.Maintains positive customer relations, which includes:
1. Assuring personal behaviors and team member behaviors toward all customers are courteous, attentive, respectful, and enthusiastic.
2. Assuring a comfortable environment for customers.
3. Executing "Floor Management" by directing activities and greeting and interacting with customers on each shift worked.
4. Immediately resolving customer complaints by apologizing first and then assuring the satisfaction of the customer. Complaints may be received in person, by phone, or in writing. Consult with the RGM if the customer is not satisfied with your suggested resolution.
- a. B.L.A.S.T. is the acronym we use for our complaint resolution process:
- Believe the customer
- Listen to the customer
- Apologize to the customer
- Satisfy the customer
- Thank the customer
5. Immediately contacting the RGM (or DM if the RGM is not available immediately) regarding any incidents in which customers are injured or in which customers claim some harm done to them.
B. Ensures customers receive prompt, quality service. This includes:
1. If the RGM has delegated scheduling to the Shift Manager, scheduling the correct number of team members for forecast sales volume; and deploying those Team members in the correct job roles.
2. Following established service guidelines and procedures to assure all Hospitality Standards are achieved.
3. Directing team member activities to assure speed of service standards are met or exceeded, including product preparation times and delivery times.
4. Personally serving customers as required to meet the demand of the volume of business.
5. Ensuring customers are greeted properly and seated as quickly as appropriate.
6. Recognizing and dealing effectively with the special needs of customers.
7. Ensuring that customer orders are taken promptly, prepared accurately, and served quickly.
8. Ensuring customer follow-up, which means servers check back with customers frequently to see if there is anything else needed.
9. Ensuring immediate attention is given to customers ready to pay, either by prompting servers to complete the table cashout procedure or by performing the transaction of cashing out customer as needed.
10. Ensuring the phone is answered promptly and courteously, following the Telephone Service Essentials.
11. Responding to customers at pickup counter and drive-thru window; finding order; collecting money for the order; verifying order to customer; and, thanking customers.
12. Dispatching orders for delivery customers as required to meet the demands of the volume of business, grouping orders by geographical destination and instructing drivers as they arrive and depart which orders to take with them and where to go.
13. Delivering pizzas as necessary to meet the demands of the business.
14. Ensuring customers are thanked for their business.
C.Ensures quality ingredients are used to prepare all products. This includes:
1. Maintaining Food Safe Temperatures for all ingredients and products.
2. Ensuring food preparation utensils and food contact surfaces are property cleaned and sanitized.
3. Ensuring that procedures for receiving, handling and storing ingredients are followed.
4. Recognizing and correcting any raw ingredients or product problems.
5. Maintaining inventory levels which assure product freshness and no outages.
6. Eliminating the potential for cross contamination.
7. Ensuring that proper procedures are followed to prepare ingredients (dough, sauces, meats, cheeses, and vegetables).
8. Ensuring salad bar is maintained according to standards of operation (restaurant only).
9. Personally preparing ingredients as necessary.
D. Ensures quality products, which includes:
1. Planning dough, ingredient and product preparation to meet sales volumes and personally preparing these items, as necessary, to meet the demand of the business.
2. If deemed appropriate by the RGM, performing a product cookability test to verify proper oven and belt speed.
3. Following proper procedures to process customer orders.
4. Personally preparing and cooking menu items as required to meet the demands of the volume of business.
5. Taking every appropriate action, in consultation with the RGM, including driving to another restaurant to pick up product, to resolve outage or potential outage situations.
6. Maintaining inventory levels which assure product freshness and no outages.
7. Planning dough, ingredient and product preparation to meet sales volumes and personally preparing these items, as necessary, to meet the demand of the business.
8. Assuring all products are prepared according to exact specifications, recipes and procedures.
9. Personally preparing and cooking menu items as required to meet the demands of the volume of business.
E.Ensures that all standards for cleanliness and sanitation are met or exceeded, with particular attention to:
1. Restrooms.
2. Table tops; booth backs and seats; and chair seats.
3. Silverware, plateware, and glassware.
4. Dining room floors.
5. Salad bar.
F.Implements new or approved changes in policies, procedures and/or operation standards. This involves:
1. Attending training sessions.
2. Reading "Rollout Guides" or other resources.
3. Assisting the RGM with training restaurant team members of new procedures or changes.
4. Participating in crew training and other actions in the restaurant to assure full and correct implementation.
5. If requested by the RGM, assisting with updating all manuals, resources and job aids as required.
III.PEOPLE
A.Maintains positive team member relations and a positive and productive workplace, which involves:
1. Building relationships with team members based on mutual trust and respect.
2. Communicating and following the Daland “5 Star” Vision and Core Beliefs.
3. Promoting teamwork.
4. Being familiar with benefits available to team members, and referring appropriate questions to the RGM regarding these benefits.
5. Informing the RGM of all team member grievances.
6. Performing correct and consistent administration of team member disciplinary procedures, and discussing all recommended discipline with the RGM.
7. Assuring compliance with various governmental regulations, such as ensuring that all team members are clocked in while working, complying with overtime laws, child labor laws, alcoholic beverage laws, anti-discrimination and anti-harassment laws, FLSA, EEO, etc.
8. Performing consistent administration of and compliance with Company policies and procedures.
9. Communicating effectively with the crew and management team.
10. Assuring team member understanding of the Daland Corporation organization structure and career opportunities within the Company.
B. Assists the RGM with managing the size and quality of staff. The following are responsibilities of the RGM, but if requested by the RGM, the Shift Manager may assist with the following:
1. Planning, recruiting, and hiring to assure a full staff at all times and to assure adequate time for processing MVR's (motor vehicle reports), background checks, etc. Only the RGM is authorized to hire new team members; and Shift Managers are only permitted to interview applicants if authorized by the RGM.
2. Continuously recruiting and taking applications from job candidates.
3. If requested by the RGM, utilizing staffing tools, such as the Pizza Hut Hiring Zone and the team member Assessment; interviewing job candidates; and, checking their references.
4. If requested by the RGM, making recommendations to the RGM regarding the best qualified candidates.
5. Complying with Company employment practices and governmental regulations, including EEO, ADA Title I, etc.
C.Assisting the RGM in training newly hired team members and team members preparing for promotions. This involves:
1. Following Company training policies and meeting Pizza Hut Training Standards.
2. Utilizing on-line training, trainer's guides, checklists, job aids, tests and other training resources to assure a thorough job of training.
3. Using the four step training process of: (1) Preparation (2) Show & Tell; (3) Guided Practice; and (4) Follow-up to assure the trainee can perform all tasks up to required standards prior to being allowed to perform the tasks "solo."
D. Manages team member performance and supervises work. This includes:
1.Utilizing Coaching for Results, which includes:
- a.Activating team member behavior.
- (1)Providing guidance, direction, and reassurance to all team members.
- (2)Communicating non-negotiable standards of performance to team members.
- (3)Conducting team member meetings, group training sessions and Jump Start meetings.
- (4)Assigning Team members tasks from the Opening, Closing and Maintenance checklist.
- (5)Communicating job assignments for each shift to team members and assuring each team member works their assignment.
- (6)Giving instructions to team members that are clear and assure understanding.
- (7)Assigning team members to breaks.
- (8)Sending team members home early if not needed due to business conditions.
- (9)Calling team members in early, or calling extra team members to work to cover unanticipated surges in business volume.
- (10)Assuring all opening, shift, and closing job duties are completed and performed correctly.
- b.Evaluating team member behavior.
- (1)Observing team member performance each shift.
- (2)Working along side team members and assisting in the performance of their tasks, as needed.=
- (3)Monitoring team member meals and signing team member meal guest checks.
- (4)Ensuring adherence to alcoholic beverage laws of the local community
- (5)Conducting regular, written performance appraisals on all subordinates, using the procedure and forms provided by the Company and within the time specified in compensation plans.
- c.Responding to team member behavior with consequences.
- (1)Taking action (corrective or positive reinforcement) to assure team member performance meets or exceeds standards.
- (2)Providing ongoing counseling that gives praise and recognition to team members for jobs well done; identifies areas of performance needing improvement and methods for improving; and, if required, gives reprimands that are job focused.
2.Handling non-routine occurrences/emergencies and informing the RGM of such occurrences/emergencies.
E. Assists RGM with developing promotable team members in his/her restaurant and promotable management for Daland. This includes:
1. Using Company training programs and resources to prepare candidates for promotions and to assure that the management team is 100% certified in management processes, systems, policies, and procedures.
2. Making recommendations to the RGM regarding which team members are eligible for promotion to Shift Manager/Leader.
F. Assists RGM with personnel administration functions, which includes:
1. Assuring team members complete all required personnel documents such as W-4's, I-9's, Team member Acknowledgment, Arbitration Agreement, Delivery Driver Statement, New Driver Checklist, etc.; and, that these required documents are transmitted to the Home Office.
2. Documenting required payroll data for team members, including accurate recording of hours;
3. Managing worker's compensation claims, etc. in accordance with Company policies and procedures.
4. Maintaining personnel files on all team members, which includes filing all personnel documents; recording training dates, vacation dates, evaluation dates, pay increases, and absences; etc.
IV. MARKETING
A.Implements marketing programs to increase business. This includes:
1. Engaging in positive community/public relations for Pizza Hut.
2. Providing input for promotional ideas.
3. Displaying and maintaining Point of Purchase (P.O.P.) and other elements of national, co-op or local marketing programs;
4. Properly executing authorized marketing programs, including new product tests.
5. Taking initiative to recommend new opportunities for increasing business.
V. FACILITIES
A.Maintains a quality environment for our customers and team members. This includes:
1. Conducting routine Preventive Maintenance on the facility and equipment.
2. Taking corrective actions pursuant to the RGM’s safety inspections.
3. Advising the RGM regarding non-routine problems and following up to assure such problems are corrected.
4. Maintaining cleanliness and sanitation in all areas of the restaurant.
5. Organizing all work space to ensure ease of operation.
6. Providing a quality work environment that is safe and complies with all OSHA regulations.
7. Cleaning and organizing refrigeration units.
8. Ensuring floors are clean and free from obstruction.
9. Keeping HVAC vents and filters clean.
10. Ensuring trash is disposed of promptly and according to security procedures.
11. Ensuring parking lot and grounds are free of trash and debris and taking action to correct deficiencies.
12. Ensuring all equipment is used according to proper operational procedures.
13. Keeping restrooms cleaned and stocked.
14. Keeping food prep areas cleaned and sanitized according to approved procedures.
15. Ensuring the daily cleaning and maintenance of all equipment.
16. Correcting any unsafe conditions.
17. Following up to ensure all Scheduled Maintenance and Daily CM&A items are completed.
VI. ADMINISTRATION
A.Effectively manages time, allocating an appropriate amount to each Key Result Area.
B.Manages all paperwork, documentation, written reports, etc. and assures these are always submitted on time and that they are accurate, complete and organized.
C.If requested by the RGM, orders inventory items used in the restaurant. This involves these processes:
1. Review of the Inventory on Hand is performed. The Inventory on Hand is compared to the Weekly Ideal Usage, which is obtained from the Product Cost Analysis report, and a determination is made as to the amount of each particular item to order. The order is then recorded on an order sheet, or is entered into the computer for electronic transfer of order information.
2. Amount ordered of each item may be adjusted upward or downward based on projections of upcoming sales trends, coupon impact, weather changes or other extra-restaurant environmental changes.
3. Calls in orders for supplies on the phone, or electronically submits order via computer.
D.If requested by the RGM, conducts weekly inventory of all food, paper and beverage products used in the unit. This involves these processes:
1. Physically reviewing and counting the inventory on hand (which involves climbing shelves, bending, kneeling, etc.).
2. Rearranging inventory to assure proper rotation (first in, first out) and to make it easier to count and control.
3. Recording amounts of inventory on hand on the inventory form.
E.If requested by the RGM, prepares the weekly labor schedules. This involves these processes:
1. Updating Guest Check Comments file in the restaurant computer to assist in forecasting labor hours.
2. Reviewing Guest Check Comments file and upcoming promotions that may affect sales during the upcoming week.
3. Forecasting anticipated sales volume by shift, by day and by week. The forecast is based on knowledge of any outside events that may influence sales such as coupons, promotions, etc. Particular consideration must be given to how sales are generated--that is, dine-in business contrasted to carry-out business or delivery business.
4. Updating sales forecasts in the FMS (computer system) based on outside events that may influence sales.
5. Reviewing requests for days off that have been turned in by team members and when possible allowing for requested days off.
6. Using experience, past schedules, Black Book information, Guest Check Comments, knowledge of team members' abilities, labor goals, and FMS (computer system) recommended labor schedule to assist in scheduling the proper number of team members each shift to meet sales volume and labor hour guidelines.
7. Obtaining the RGM's approval of the schedule, then posting the final schedule in accordance with Daland Corporation's policies and procedures.
F.Performs daily accounting procedures. This includes these processes:
1. At close of business day requests a sales report from the FMS computer to determine total sales entered into the cash drawers throughout the system.
2. Any cash paidouts or miscellaneous deposits from the day are verified with what is in the system.
3. Cash on hand is counted and reconciled against total sales.
4. Total deposit is calculated, and a deposit is prepared.
5. Dough waste and PPP waste is documented and calculated on the form provided and filed for use in forecasting future prep levels.
6. All gift checks are counted and verified against prior counts less current gift check sales on the Gift Check Tracking form.
G.If requested by the RGM, performs weekly accounting procedures. This includes these processes:
1. Completing, as required, the Weekly Sales Analysis and analyzing it.
2. Completing the Weekly Inventory.
3. Completing the payroll functions.
4. Analyzing the Daily Business Summary Report to determine performance in key measurement areas.
5. Preparing the weekly packet for the home office, using the checklist provided to assure all required items are included.
6. Calling any needed FRS numbers or statistics to the District Manager.
H.Meets all deadlines and assures that subordinates meet their deadlines.
I.Manages all paperwork, documentation, written reports, etc. and assures these are always submitted on time and that they are accurate, complete and organized.
J.Maintains and updates required files, manuals, and reports.
NON-ESSENTIAL FUNCTIONS: The "non-essential" functions are routinely performed by the person holding the Shift Manager's position and they are essential to the effective operation of the restaurant. However, these functions are considered "non-essential" to the position. The Manager on Duty is then accountable for assuring the delegated functions are correctly performed.
A.Receives and stores inventory items used in the unit. This involves these processes:
1. Checking in products as received off delivery vehicles to verify product quality and that amount charged for on the delivery receipt/packing slip is correct when compared to amount received. Signing the delivery receipt/packing slips for amount of goods received.
2. Using a two-wheeled hand truck, assists and oversees other employees in proper storage of products. Weight of items varies. Generally, more than one person is available to perform this task.
3. Entering on inventory screen of the computer the amount and cost of each product item received as noted on the delivery receipt/packing slip.
MINIMUM QUALIFICATIONS/REQUIREMENTS: The following are the qualifications and minimum requirements necessary for a person to perform this job.
A.Ability to work a minimum of three (3) days and at least 30 hours per week, but must be available to work more than 30 hours per week if necessary due to business necessity. In addition to having the flexibility to work a variety of shifts, including late nights and weekends.
B.Valid driver's license, insurance and automobile. Position involves taking large amounts of cash receipts to the bank at different times of the day including at night. Banks are generally at a distance requiring a person to drive to the bank. Position may also need automobile to pick up product, make pizza deliveries, etc.
C.Able and willing to travel. Position requires occasional travel for training, new store openings and meetings, which may be held at a distance from home not feasible to drive daily. Overnight stays at an out-of-town location may be required during the training sessions, new store opening, and meetings for up to one week at a time.
D.Telephone (cellular or land line) at residence. There are circumstances that may arise at the restaurant of which the manager must be informed while off duty.
E.Sufficient physical agility to perform the functions of the position. This includes these processes:
1. Sufficient physical strength to lift most items used in the operation of the restaurant.
2. Sufficient communication skills. Position involves communicating with team members, superiors and customers.
3. Ability to move at a fairly quick pace and to remain stationary for periods of six to eight hours at a time. The position requires person to perform all of the above at different times and intervals as needed by the realities of the environment and the position.
F.Ability to maintain a state of self-composure under conditions of stress and anxiety. Position routinely involves stress resulting from work overload, role ambiguity, conflicting demands from various customers, and team members. Person in this position must be able to function effectively under these conditions.
G.Previous experience with this Company as a Shift Manager/Leader; or previous restaurant management experience with another Company.
H.Sufficient mental and cognitive ability to perform the calculations and fill in the sales and product tracking forms used by the Company. Estimate is that ability to read, write and perform arithmetic procedures at the 12th grade level will be sufficient.
I.Ability to perform all of the duties of the hourly team members and supervisors under this person's supervision. As time and circumstances dictate the person in this position may have to assist or take over the duties of an hourly team member in order to expedite good customer service. Also necessary in order to train new team members in this function.
J.Ability to communicate effectively with a large variety of persons with diverse backgrounds. Position is one where incumbent provides direction and supervision to a variety of subordinates with diverse levels of education, differences in ages, and experience. Must be able to express ideas and concepts to these persons to assure teamwork through organization and leadership.
EQUIPMENT USED:
Standard restaurant office equipment such as calculator, telephone, and computer.
"Pizza Wheel". This is a device with a handle and a round stainless steel blade that is used to cut certain types of pizza dough crusts.
"Rocker Knife". This is a device about two feet long with a stainless steel handle that extends across the top of a stainless steel blade fashioned in a curve. It is used to cut certain types of pizzas by placing on the pizza and rocking the blade across the pizza surface.
"Vegetable Chopper". This is a hand operated mechanical device used to slice whole raw vegetables into smaller pieces for use on the make table.
"Crock". A generic term used to describe a variety of containers used to hold food items served on a salad bar. Knives, spoons, spatulas and other common utensils.
"Make Table". An open topped, refrigerated, compartmented table for the storage of food items used in the preparation of products for customer orders. Has doors which allow access to interior refrigerated section below the table top where additional food items are stored as back-up for the items stored on top of the table.
"Cut Table". A stainless steel table where cooked pizzas are cut into slices and where other products are assembled prior to serving them to the customer.
"Oven". A power driven device operating at high temperatures used to bake food products.
"Automatic Dishwasher". A mechanical device consisting of: (1) a dirty dish/rinse table, used to rinse and prepare dishes for washing; (2) dishwasher compartment, where dishes are washed with hot water, soap, sanitizing chemical and pressurized water; and, (3) clean dish/drain table, where clean dishes drain, dry and are sorted for storage.
"Dough Proofer". A metal cabinet heated to approximately 95 degrees Fahrenheit, in which panned dough is placed to obtain the correct rise in the dough.
"Three Compartment Sink". A stainless steel sink, separated into three compartments used to wash, rinse and sanitize all kitchen tools, and smallwares not washed in the automatic dishwasher.
"Pan Gripper". This is a mechanical device used to grip certain types of pizza pans for purposes of lifting or carrying when they have been heated to a high temperature.
"Portion Cups". These are pre-measured cups used by Pizza Hut restaurants for portioning cheese and toppings for pizzas.
"Scales". This is a small table model scale used to weigh and portion ingredients used in the recipes of various products.
"Pan Separators". These are plastic items, of varying shape, diameter and circumference, used to separate pans filled with dough to protect the dough inside the pan from contamination and to allow pans to be stacked for storage.
"Dough Perforator". This is a mechanical device consisting of a handle attached to a small wheeled drum that is dotted with metal protrusions. It is used to perforate certain types of dough prior to topping to prevent formation of bubbles during baking.
"Cutting Board". This is a hard surface board, rectangular or square in shape, on which pizzas and other food products are cut.
"Reach In". A refrigerated piece of equipment with doors which open to allow dough or pizza ingredients to be stored inside for easy access.
"Scraper Block". A device with a stainless steel blade and a wooden handle in a rectangular shape used to cut dough for portioning, and scraping the make table/cut table surfaces off for cleaning.
"Prep Table". A table about 34 to 36 inches high, with a stainless steel top. The table is used as a work surface for the preparation of many ingredient items used in the Pizza Hut.
“Kitchen and Dining Utensils". Such as knives, spoons, spatulas, etc.
"Plates, Bowls, Mugs, Tumblers". and other items to serve food and beverages to customers.
"Spoon". A stainless steel device with a long handle and a curved end used for applying sauce to prepared dough.
"Pan". A round metal device with a raised edge for holding dough prior to topping and baking.
"Walk-in". A refrigerated compartment of sufficient size to allow the individual to actually walk into the refrigerated compartment to obtain or store perishable items. Compartment may be sufficiently cold to freeze items.
"Freezer". A refrigerated box maintained at sufficient cold temperatures so as to freeze items stored inside.
"Ice Machine". A device that automatically receives water, freezes it, and stores it as ice in an attached storage bin.
"Soda Dispenser" (pop machine). A device that mixes syrup and carbonated water and dispenses carbonated soft beverage (soda, pop).
"Point of Sale Computer". Electronic device used in tracking orders, inventory, payroll information. Contains cash drawer used to make change for customer transactions, track paidouts, delivery orders, dispatching.
"FMS" Field Management System. Software used on the point of sale computer that provides management information necessary in managing the day to day operations of the restaurant.
Miscellaneous equipment such as a telephone, carry-out boxes and bags, hand towels, etc.
Serving tray, ticket book, bus tub, flatware and other small items.
Note: Many restaurants have additional equipment such as beer boxes, spaghetti magic machine, etc.
PLACES WHERE WORK IS PERFORMED: This work is performed on the employer's premises. Location of premises may vary throughout the employer's Company. This job description was developed by observing the work in process and from information provided by the management of Daland Corporation.
Minimum Qualifications:
Education: Graduate of an accredited Radiologic Technologist Program and completed required clinical hours.
Experience: no experience required
Licensure: State licensure may be required depending on the specific state of practice.
Certification/Registration: American Registry of Radiologic Technologists (ARRT) registry or registry eligible. Achieved ARRT registry within 6 months of hire. Basic Life Support (BLS) within 30 days of hire.
Preferred Qualifications:
Preferred Skills, Knowledge, and Abilities:
Proficiency in operating radiographic imaging equipment.
Strong attention to detail and ability to follow complex instructions.
Excellent communication and interpersonal skills.
Ability to work effectively in a fast-paced, collaborative environment.
Physical Requirements:
Position requires the ability to push, pull, and/or lift 50 lbs. on a regular basis.
Position requires prolonged standing and walking during each shift.
Position requires the ability to grip, reach, bend, kneel, twist, and squat to perform duties.
From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
Education: Graduate of an accredited Radiologic Technologist Program and completed required clinical hours.
Experience: 1 year of relevant experience OR graduate of Bachelor degree program
Licensure: State licensure may be required depending on the specific state of practice.
Certification/Registration: ARRT (R)(M); Basic Life Support (BLS);
Preferred Qualifications:
Preferred Skills, Knowledge, and Abilities:
- Proficient knowledge in producing diagnostic images with the ability to recognize technical abnormalities
- Knowledge of a variety of advanced procedures as applicable
- Knowledge of safe & proper machine operation.
- Knowledge of quality improvement programs.
- Knowledge of machine emergency procedures and radiation safety procedures.
- Knowledge of protocols and ability to make adjustments as needed
- Strong attention to detail and ability to follow complex instructions.
- Excellent communication and interpersonal skills.
- Ability to work effectively in a fast-paced, collaborative environment.
Physical Requirements:
• Position requires the ability to push, pull, and/or lift 50 lbs. on a regular basis.
• Position requires prolonged standing and walking during each shift.
• Position requires the ability to grip, reach, bend, kneel, twist, and squat to perform duties.
Why Mercy?From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
Position: Patient Care Associate/Patient Care Technician
Department: OR
Hours / Shift: Full-Time
Overview:
Under the direction of the RN or LPN, assists in the individualized care of the patient to achieve the patient’s highest level of wellness.
Job Duties:
Opportunity for advancement through career ladder to Patient Care Technician (PCT) and/or beyond.
Responsibilities for Patient Care Associate (PCA):
Obtain vital signs and document into the electronic medical records system
Assist with patient care needs including, meals, bathing, toileting, ambulation, patient mobility, and transport.
Clerical support duties, as needed.
Responsibilities for Patient Care Technician (PCT):
Patient Care Associate job duties.
Phlebotomy/blood cultures
Enteral Feeding
Wound care
IV/Foley removal
Trach care/suctioning
Qualifications:
Education: High school diploma, G.E.D, CNA/CPTC., and/or a current co-worker of Mercy.
Experience: CNA/CMA experience or certification required.
Minimum Physical Requirements
Position requires individuals to push, pull, and/or lift 50 pounds on a regular basis
Position requires prolonged standing and walking each shift
Position requires the ability to grip, reach, bend, kneel, twist, and squat to perform duties
Training:
Our Patient Care Associate training program is an accredited Department of Labor Apprenticeship Program, providing a comprehensive, hands-on experience. Join Mercy to gain valuable skills and credentials through this program in a supportive healthcare environment!
If no previous experience, Mercy will provide a required 175-hour training program that meets the Department of Health and Senior Services requirements. The program will be completed as part of the new hire orientation process and must be completed within 90 days of hire to remain in the PCA position per state guidelines.
BLS Required within one month of hire, completion of PCA competencies within 3 months of hire
Key Mercy Benefits:
Education assistance towards nursing degree.
Future career growth!
From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
The Advanced Cardiovascular Technician is responsible for entering all Holter Monitor and/or Cardiac Event Monitor studies in cardiac software, ensuring compliance for joint commission, in addition to all responsibilities for the CV Tech. This role will act as lead when leader is not available and be responsible for the day to day operation of the department.
- Oversee QA measurements
- Precepting new hires, students, and current co-workers as needed
- Cardiac software superuser
- Performs EKGs
- Places Holters and event monitors
- Maintains proper logs and documentation of all tracings received.
- Consistently communicates monitor results with ordering physicians and corresponding physicians.
- Assists with scheduling patients appropriately in the scheduling system.
- Assists physicians and staff with patient flow, obtaining dictation, chart preparation, etc., in order to ensure proper patient care.
- Stock Supplies / Check Supply Expirations
- Performs other duties as assigned
Qualifications
Education: High school diploma or equivalent.
Certifications: BLS (Basic Life Support)
Other: Ability to read and communicate effectively in English. Basic computer knowledge. EKG and EEG experience.
Preferred Experience: One Year of Experience or previous on-the-job training or training through an Allied Health program.
Preferred Certifications: CCT or CRAT through CCI or CET through American Allied Health.
Preferred Other: Additional languages preferred.
Physical Requirements:
• Position requires individuals to push, pull, and/or lift 50 pounds on a regular basis.
• Position requires prolonged standing and walking each shift.
• Position requires the ability to grip, reach, bend, kneel, twist, and squat to perform duties.
From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
keyword(s): Cardiovascular tech
Advanced Tech
Find your calling at Mercy!
The Registered Nurse, utilizing theoretical concepts as a basis for decisions in practice will assess, plan, implement and evaluate individualized nursing care in accordance with standards of nursing practice for adult/geriatric patients. Candidate must report to facilities within the regional footprint of the home hospital where they are employed. Determination of facilities to be discussed upon hire into position with approval by hiring leader/leadership team.
Position Details:
MERCY HOSPITALS: Mercy Southeast (Cape Girardeau) and Surrounding Communities
Department: Regional Float Pool
Status: Full Time
Shift: Nights
#BeAMercyNurse
Incentives:
- Sign-On Bonus: $10,000 - No Contract
- Base Pay (Determined by Experience)
- PLUS Regional Float Pool Perk AND Shift Differentials: $2.75/Evenings, $4.60/Nights, $1.50/Weekends
- Benefits: Day-One Comprehensive Medical, Vision & Dental Insurance
- Stay Premium Program: Active after 2 years with Mercy. Up to $8/hour based on years of Mercy service
- Retirement: 401(k) Employer-Matched Retirement Funds
- Referral Bonus Opportunity
- Education Assistance:
- Tuition Reimbursement $2,000 per year
- ASN to BSN (Up to $16,000)
- PTO/Vacation Time
Overview:
Join Mercy's Regional Float Pool and bring your expertise to multiple hospitals across the St. Louis region. This is a fantastic opportunity for experienced RNs who thrive in dynamic environments and enjoy continuous learning.
Why Join the Float Pool?
- Strengthen your clinical assessment and critical thinking skills
- Collaborate with diverse care teams and patient populations
- Experience flexibility and variety in your daily work
Units You May Float To:
- Medical/Surgical (Med/Surg):
- Orthopedics (Ortho), Trauma, Surgery, Oncology, Neuro, Medical, Surgical
- Telemetry (Tele):
- Cardiac, Surgical, Medical
- Stepdown (SD):
- Medical (Med SD), Surgical (Surg SD), Trauma, Neuro, Cardiac
- Intensive Care – ICU:
- CVICU (Cardiac Vascular ICU), Trauma ICU, Burn ICU, Surgical ICU, Neuro ICU
- And more!
Facilities You'll Serve (Min of 3 assigned) :
- Mercy St. Louis - St. Louis, MO
- Mercy Jefferson - Festus, MO
- Mercy South - South St. Louis County, MO
- Mercy Washington - Washington, MO
- Mercy Lincoln - Troy, MO
- Mercy Perry - Perryville, MO
- Mercy Southeast - Cape Girardeau, MO
- Mercy Stoddard - Dexter, MO
Qualifications:
- Required Education:
- Graduate of an accredited registered professional nursing program.
- Preferred Education: BSN
- Licensure:
- Is personally responsible for obtaining, and maintaining, a current RN license within the hiring state and/or compact licensure in which nursing duties are performed and must meet all state board of nursing requirements.
- REQUIRED Experience:
- One year of recent bed-side RN experience to work Med Surg.
- For all other specialties (ICU, etc.) a minimum of two years of recent bed-side RN experience.
- Preferred Experience: Epic experience
- Certifications (Must have to start):
- For Med Surg and Behavioral Health - BLS
- For Women's Health - BLS & NRP
- For Critical Care (CC) - BLS, ACLS
- For Emergency Department (ED) - BLS, ACLS, & PALS
- Physical Requirements/Demands:
- Stand/Walk most of the time on duty; significant amount of bending and stooping, as well as lifting and turning patients with assistance; push/pull/grip up to 50 pounds
Why Mercy?
From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
Position Summary
The Vice President (VP) of Sales and Marketing is a strategic executive leadership role reporting directly to the CEO and serving on the Executive Leadership Team. This position leads and aligns MedPharm’s Business Development, Project Management, and Marketing functions with the shared goal of accelerating sustainable revenue growth. The VP of Sales and Marketing is responsible for setting and executing the company’s commercial strategy, cultivating client relationships, driving top-line performance, and leading a high-performing cross-functional team that represents MedPharm in the market. This leader will ensure consistent delivery of integrated solutions across all stages of the client lifecycle—from lead identification to contract signing and program execution—within the context of MedPharm’s CDMO business focused on topical and transdermal drug development and manufacturing.
Essential Functions
Strategic Leadership & Growth
- Own and execute the commercial strategy to grow MedPharm’s development and manufacturing services globally.
- Lead the Business Development and Project Management functions to ensure alignment across pre-sales, proposal generation, contracting, and program delivery.
- Serve as a primary driver of growth strategy, pipeline development, forecasting, and sales target achievement.
- Partner with the CEO and Executive Team to provide insight and updates to the Board of Directors on growth initiatives, pipeline strength, and go-to-market performance.
Team Management & Performance
- Recruit, develop, and retain high-performing Business Development and Project Management teams.
- Coach team members to continuously improve client engagement, customer service, proposal requests, technical positioning, and deal closure capabilities.
- Establish KPIs and reporting tools to monitor team effectiveness, sales pipeline health, and client satisfaction.
- Cultivate a collaborative and accountable culture that fosters internal alignment and a unified client experience.
Commercial Execution
- Lead pricing discussions in coordination with Finance and Technical teams to ensure profitable, competitive proposals.
- Lead contracting and negotiation in collaboration with legal and operational leadership.
Market Positioning & Intelligence
- Direct marketing efforts to strengthen the MedPharm brand, elevate market visibility, and clearly communicate service differentiation.
- Analyze market trends, client feedback, and competitor activity to inform strategic planning and identify emerging opportunities.
- Contribute to cross-functional development of new service offerings and solutions based on market needs and internal capabilities.
Operational & Financial Oversight
- · Collaborate with functional peers across Technical, Manufacturing, Quality, and Finance to ensure effective internal handoffs and delivery of contracted programs.
- Develop and manage department budgets; ensure optimal allocation of resources to achieve strategic goals.
- Utilize CRM and business intelligence tools to drive data-based decision-making and process automation.
Supervisory responsibilities:
· Direct Reports: Yes
· Indirect Reports: Yes
Travel requirements:
· Yes, 50%
Education and Experience
- At least 10 years of experience in the pharmaceutical industry with at least 5 years’ experience as Business Development Director or equivalent Bachelor’s of Science Degree required, MBA preferred.
- Combined CRO and cGMP experience preferred. Demonstrated customer focus – a track record of building and maintaining positive customer relationships and key business outcomes
Required Qualifications
- Proven experience growing business through leadership of commercial functions, including Business Development, Project Management, and Marketing.
- Demonstrated success leading and developing cross-functional sales teams in pharmaceutical or life sciences sectors.
- Experience managing global client relationships across North America, Europe, and ideally Asia.
- Deep knowledge of topical and transdermal dosage forms; small molecule drug development experience preferred.
- Track record of individual sales success and effective transition into strategic sales leadership.
- Expertise in developing, scaling, and optimizing commercial business processes and tools.
Knowledge, Skills, and Abilities
- Strategic Vision: Ability to drive long-term growth strategies while managing near-term priorities.
- Team Leadership: Inspires high performance, accountability, and collaboration across functions.
- Client Focus: Builds strong partnerships through trust, value creation, and responsive service.
- Commercial Acumen: Skilled in opportunity evaluation, pricing strategy, and contract negotiation.
- Communication: Exceptional ability to articulate complex concepts across audiences and formats.
- Executional Agility: Balances big-picture thinking with hands-on engagement where needed.
Physical Demands and Work Environment
While performing the duties of this job, there may be certain physical demands required for the position.
- Requires frequent standing, walking, & gripping
- Requires constant sitting, seeing, & hearing
- Requires occasional carrying, lifting, pushing, & pulling under 20 LBS
Utilizes the nursing process to provide patient care. Maintains professional accountability for provision of patient care for the assigned patients. Evaluates the overall effectiveness of care provided by other direct care givers. Coordinates the patient care in conjunction with other departments. Maintains patient rights and confidentiality of patient information. Performs duties and responsibilities in a manner consistent with our mission, values, and Mercy Service Standards.Position Details:
Location
Mercy Hospital Stoddard
1200 North One Mile Rd
Dexter, MO 63841
Hours/Schedule
PRN - Infusion Center
Qualifications:
Education: Graduated from a school of nursing (Associate's Degree, Diploma, or BSN).
Licensure: Is personally responsible for obtaining, and maintaining, a current RN license within the hiring state and/or compact licensure in which nursing duties are performed and must meet all state board of nursing requirements.
Experience:
Certifications:
- Basic Life Support certification through the American Heart Association or successful completion of course within 30 days of hire.
One or more of the certifications below may be required based on the position/unit hired to, or acquisition of certification within department required timeframe:
- ACLS (Advanced Cardiac Life Support)
- NRP (Neonatal Resuscitation Program)
- ENPC (Emergency Nursing Pediatric Course)
- TNCC (Trauma Nursing Core Course)
- CPHON (Certified Pediatric/Hematology/Oncology Nurses)
- OCN (Oncology Certified Nurse)
- BLS (Basic Life Support)
- PALS (Pediatric Advanced Life Support)
- PEARS (Pediatric Assessment Recognition and Stabilization)
- S.T.A.B.L.E. (Sugar, Temperature, Airway, Blood Pressure, Lab Work, And Emotional Support) Six Assessment & Care Modules
- C-EFM (Fetal Monitor Certification)
- Other unit-specific certifications as required
Other:
Preferred Education:
Preferred Licensure:
Preferred Experience:
Preferred Certifications:
Preferred Other:
Physical Requirements:
• Position requires the ability to push, pull, and/or lift 50 lbs on a regular basis.
• Position requires prolonged standing and walking during each shift.
• Position requires the ability to grip, reach, bend, kneel, twist, and squat to perform duties.
From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
keyword(s): RN
