Github Connectivity Issues Jobs in Usa
6,747 positions found — Page 7
Job Title: Embedded Hardware Engineer - MCCB and PCB
Location: Cedar Rapids, IA
Job Summary
- Responsible for the Hardware design and development activities for the MCCB products
- Communicate with various (SW, purchase, CAD, ME) teams and implement it in the HW design
- Assist the testing team with test plan generation and procedure
- Support technician in the testing related issue and execute the testing of the designed boards
- Assist the ECAD and MCAD team in product design update.
- Good knowledge on PDLC and support to Industrialization teams.
Knowledge and requirement:
- well experience in Microcontroller selection, design and development activity
- knowledge in Allegro - Cadance for simulation, schematic drafting, PCB layout and routing
- knowledge in MCAD activity review with CREO.
- knowledge in power supply design is an added advantage (not a hard requirement, but need to have atlease testing knowledge)
- knowledge in HW interface(Ethernet) and communication (SPI)
- Knowledge in Simulation tools like MATLAB, LTSPICE & TINA
- knowledge in JIRA, JAMA and confluence (as a user)
- Windchill knowledge(PDM) as a user is must.
- Knowledge in GFCI & AFCI are added advantage for this position
Job Opportunity - Software Lead
Location : Mountain View, CA
Duration : Full-Time
Job Summary:
We are seeking an experienced Senior Embedded Software Engineer with a strong background in automotive software development, particularly in telematics and infotainment systems. The ideal candidate will have deep expertise in non-AUTOSAR platforms, low-level embedded development, and hands-on experience with microcontrollers from NXP and Infineon.
Key Responsibilities
- Design, develop, and integrate embedded software for automotive applications, focusing on telematics and infotainment systems.
- Work on non-AUTOSAR platforms, including development of:
- Bootloaders
- Diagnostics (UDS, CAN, etc.)
- Peripheral drivers
- BSP (Board Support Package) integration
- Develop telematics applications using Embedded C on microcontroller-based systems.
- Interface with hardware teams to ensure seamless integration of software with ECU platforms.
- Perform debugging, root cause analysis, and issue resolution across software layers.
- Ensure compliance with automotive standards and best practices for quality and reliability.
- Collaborate with cross-functional teams (hardware, system, validation) throughout the product lifecycle.
- Support system validation, testing, and release activities.
Required Qualifications
- Bachelor’s or Master’s degree in Electronics, Computer Science, or related field.
- Minimum 15 years of experience in automotive embedded software development.
- At least 2 years of hands-on experience in infotainment or telematics systems.
- Strong expertise in Embedded C programming.
- Proven experience working on non-AUTOSAR platforms.
- Hands-on experience with:
- Bootloader development
- Diagnostics protocols (UDS, CAN)
- Low-level driver development
- BSP integration
- Experience with NXP and Infineon microcontrollers.
Job Title : Industrial Manufacturing Engineer
Customer : Pierce Manufacturing Inc.
Location : Appleton, WI 54914, United States
Visa Requirement : US Citizens / Green Card holders only
Key Skills Required
- Mandatory shop floor experience
- Time Study
- Line Balancing
- Continuous Improvement
- Value Stream Mapping (VSM)
- Lean Manufacturing
Job Description & Skill Requirements
- Study assembly lines and manufacturing processes to identify improvement opportunities based on Lean principles.
- Perform detailed time studies and line balancing activities, including:
- Elemental breakdown
- Video-based time studies
- Analysis across all processes, stations, and operators
- VA / NVA / RNVA analysis
- Development of current-state line balancing
- Muri (overburden) analysis
- Develop Value Stream Maps (VSM), including:
- Current-state VSM to identify bottlenecks, waste, and inefficiencies
- Capacity analysis and baseline performance metrics
- Future-state VSM and gap analysis between current and future states
- Identify process and productivity improvement opportunities across the entire value stream and provide:
- Level 1, 2, and 3 improvement recommendations
- Detailed improvement roadmap and reports
- Develop and revise standard work instructions, including video-based work instructions.
- Conduct root cause analysis for quality issues, defects, and downtime; support corrective actions and Kaizen initiatives with detailed implementation plans.
- Support fixture design activities as per manufacturing and process requirements.
Job Title: Embedded Systems / Firmware Engineer
Location: San Jose, CA
Job Summary:
We are seeking a skilled Embedded Systems/Firmware Engineer to join our team . The ideal candidate will have strong experience in embedded C development, bare-metal programming, and hardware bring-up. This role requires close collaboration with hardware and ASIC design teams to support the development and validation of next-generation networking platforms.
Key Responsibilities:
- Develop and maintain embedded firmware using C for networking hardware platforms
- Collaborate with hardware engineers to bring up and validate new board designs
- Work closely with ASIC teams to support bring-up of custom network switch ASICs
- Design and implement diagnostic tests for platform validation and troubleshooting
- Analyze and debug hardware/software integration issues
- Interpret hardware schematics, component datasheets, and technical documentation
- Support system-level testing and performance optimization
Required Qualifications:
- Minimum of 4 years of experience in C programming
- Strong experience in embedded systems development, particularly bare-metal environments
- Proven experience in hardware bring-up and debugging
- Solid understanding of hardware-software interaction
- Experience working with x86 processors
- Ability to read and understand schematics, datasheets, and user manuals
Preferred Qualifications:
- Experience in networking systems or switch ASICs
- Familiarity with diagnostic and validation tools
- Strong problem-solving and debugging skills
- Excellent communication and teamwork abilities
Job Description:
The work involves understanding an existing Arm-based SoC embedded software code base-including setting it up, building it, and running it. And bringing up the code and existing documentation to DO-178C DAL A standards to cover the entire safety-critical software development lifecycle: requirements, design, and test. As well as requirements traceability and configuration management.
Must have experience:
• 7+ Years experience as Embedded Software Design Engineer
• Software Development Lifecycle (SDLC) per DO-178C DAL A Safety Critical Standards
• Software Requirement Capture & Analysis
• Software Architecture & Design
• Traceability
• Updating Source Code to DO-178C
• SDLC Reviews
• DAL Level A Software Development Lifecycle Documentation
• Protocols - Ethernet, SPI, RS485, CAN, I2C, Pre-SOI Audit Experience
• Design Analysis & Report Preparation, Resolving issues
• DOORS, Git, Matissa, MS Visio, AMD Vitis, ARM C Compiler, Lauterbach Trace32
Job Title: Construction Manager – Data Centers (AI & GPU Infrastructure)
Location: Austin, Texas
The company
A fast-growing, elite infrastructure platform working with the world’s leading AI labs, governments, and enterprises is hiring a Data Center Construction Manager to lead execution of next-generation GPU data center builds across multiple geographies.
This is a hands-on, owner-side role for construction leaders who thrive in the field, move fast, and deliver complex projects under extreme power and cooling demands. If you’ve built hyperscale, semiconductor, or mission-critical facilities and want to operate at the bleeding edge of AI infrastructure, this role delivers.
The position
- Lead day-to-day site execution for greenfield and brownfield data center builds
- Build and drive integrated schedules (Primavera P6 / MS Project) across design, procurement, construction, and commissioning
- Enforce a zero-incident safety culture across all contractors and trades
- Coordinate CSA and MEP scopes, resolving field conflicts in real time
- Track daily progress, cost, earned value, and resources; issue recovery plans as needed
- Oversee QA/QC, material submittals, RFIs, and change orders
- Interface closely with Design, Procurement, Commissioning, and Operations teams
- Develop scopes of work and technical exhibits for critical-path trades
- Manage construction contracts from award through close-out, ensuring budget, schedule, and spec compliance
Could this role be for you?
- Bachelor’s degree in Engineering (Construction Management preferred)
- 7+ years delivering hyperscale, semiconductor, or mission-critical construction projects
- Deep understanding of CSA & MEP execution, procurement workflows, and cost controls
- Proven success on fast-track, multi-site or multi-region builds
- OSHA 30 (or equivalent); strong familiarity with NFPA 70E, local codes, and permitting
- Strong field leadership and subcontractor management skills
- Ability to read BIM/Revit models and interpret IFC packages on the fly
- Willingness to travel 50%+ to active project sites
Why apply?
- Build GPU-dense, AI-driven data centers at global scale
- True site ownership — execution authority, not oversight
- Fast-track projects with elite design, procurement, and ops teams
- Work directly on infrastructure enabling frontier AI development
- Highly competitive base salary: $130,000 – $230,000 (experience, location dependent)
- Equity participation as part of total compensation
- Health, dental, and vision insurance
- Retirement or pension plan (region-aligned)
- Generous PTO policy
Job Title: Hardware Technician
Location: Novi, MI
Job Type: Long-Term
Job Summary:
We are seeking a detail-oriented and hands-on Hardware Technician to support hardware test bench setup, maintenance, and integration activities. The ideal candidate will have strong experience in electronics hardware environments, with the ability to install, troubleshoot, and maintain test systems while collaborating closely with engineering teams.
Key Responsibilities
- Install, wire, and configure hardware test benches according to engineering specifications and safety standards
- Perform routine maintenance, troubleshooting, and repair of test bench components and equipment
- Assist engineering teams with hardware integration, diagnostics, and validation testing
- Support calibration and functional verification of electronic test systems
- Maintain inventory of tools, components, and lab equipment
- Document test configurations, procedures, maintenance activities, and issue resolutions
- Ensure compliance with lab safety protocols and maintain a clean, organized workspace
- Work independently and collaboratively within cross-functional teams
Required Qualifications
- Associate’s degree or technical certification in Electronics, Electrical Engineering Technology, or a related field
- Minimum 2 years of experience in hardware setup, lab support, or electronics test environment
- Hands-on experience with wiring, soldering, crimping, and cable assembly
- Proficiency in using diagnostic tools such as multimeters and oscilloscopes
- Strong troubleshooting and problem-solving skills
- High attention to detail and documentation accuracy
- Ability to work in a fast-paced engineering environment
Position: CNC Process Engineer
Location: Middlebury Indiana
Job Description
The CNC Process Engineer will lead the standardization and optimization of CNC machining operations across multiple identical vertical machining cells. This role involves converting subject-matter expertise into clear, repeatable shop-floor documentation, defining escalation tiers, and serving as the advanced technical escalation point for unique failures. The position also drives continuous improvement initiatives focused on cycle time reduction, tool life, chip evacuation, and tooling strategy, often collaborating directly with tooling vendors to design custom solutions.
Responsibilities
Capture tribal knowledge from CNC subject matter experts and translate it into standardized documentation.
Create and maintain Standard Operating Procedures (SOPs) and Operator-Driven Reliability (ODR) tasks.
Develop troubleshooting guides and decision trees for rapid issue resolution.
Standardize documentation across identical machine cells while clearly identifying exceptions.
Establish escalation tiers and support model for operators, skilled trades, and CNC engineers.
Provide high-level CNC troubleshooting and root cause analysis.
Improve process reliability, repeatability, and uptime.
Drive continuous improvement initiatives focused on cycle time and process stability.
Lead tooling optimization efforts including tool selection, feeds/speeds, and tool life management.
Collaborate with tooling vendors to design custom tooling solutions.
Address chip evacuation and high-volume machining challenges.
Develop training materials and deliver hands-on training for operators, skilled trades, and engineering staff.
Essential Skills
5+ years of CNC machining or CNC process engineering experience.
Strong documentation and technical writing skills.
Proven experience with troubleshooting, root cause analysis, and continuous improvement.
Ability to work directly on the manufacturing floor.
Additional Skills & Qualifications
Experience with Haas NGC control.
Knowledge of Haas Advanced Tool Management (ATM).
Understanding of global macro variables, mathematical operators, and logical functions in CNC programming.
Experienced CAM programmer.
Experienced G-code programmer.
Familiarity with Midaco (or similar) pallet change systems and programming.
Extensive knowledge of tooling selection and application.
Experience with high-volume machining, automated fixturing, pallet systems, and robot automation related to CNC machining.
Work Environment
Job Title: Robot Programmer / Technician – Fanuc
Location: Warsaw, IN
Role Overview
We are seeking Robot Programmers/Technicians with hands-on Fanuc robotics experience to support integration and commissioning efforts for a high-volume automotive manufacturer in Northern Indiana.
This role requires strong hands-on experience with Fanuc robotics, body shop applications, and special means build. The selected candidates will support programming, touch-ups, commissioning, and quality collaboration during pre-commissioning and launch phases.
This is a high-impact, floor-support role in an active manufacturing and commissioning environment.
Mandatory Skills
- 2–5 years of experience with robot setup, troubleshooting, and/or programming
- Experience with Fanuc robotics (SpotTool+ & V9.40 for R30iB Plus controller preferred)
- Certification-only Fanuc experience is acceptable
- Must be willing to work onsite in Warsaw, IN – 6 days/week, 12-hour shifts
Key Responsibilities
Programming & Optimization
- Develop, modify, and optimize Fanuc robot programs for body shop applications
- Configure robot frames, tools, payloads, and TCPs
- Support rapid program adjustments during special means builds
Commissioning & Startup Support
- Perform robot teaching, touch-ups, and recovery in production and pre-commissioning environments
- Support robot cell startup and offline system work
- Assist in commissioning activities under tight timelines
Troubleshooting & Floor Support
- Troubleshoot robot alarms, motion issues, and sequence ladder logic
- Coordinate with Controls teams to validate I/O, interlocks, and handshaking
- Provide on-floor programming support during peak production periods
Quality & Collaboration
- Work closely with Quality teams to improve weld quality, part accuracy, and repeatability
- Support containment actions and fast-turn engineering changes
- Follow all safety procedures in active manufacturing environments
Required Qualifications
- 2–5 years of industrial robotics experience
- Strong hands-on Fanuc programming and troubleshooting
- Experience in automotive body shop environments preferred
- Ability to work extended shifts in a fast-paced manufacturing setting
- Strong problem-solving and teamwork skills
Job Title: Embedded Hardware Engineer
Location: Cedar Rapids, IA
Job Summary
- Responsible for the Hardware design and development activities for the MCCB products
- Communicate with various (SW, purchase, CAD, ME) teams and implement it in the HW design
- Assist the testing team with test plan generation and procedure
- Support technician in the testing related issue and execute the testing of the designed boards
- Assist the ECAD and MCAD team in product design update.
- Good knowledge on PDLC and support to Industrialization teams.
Knowledge and requirement:
- well experience in Microcontroller selection, design and development activity
- knowledge in Allegro - Cadance for simulation, schematic drafting, PCB layout and routing
- knowledge in MCAD activity review with CREO.
- knowledge in power supply design is an added advantage (not a hard requirement, but need to have atlease testing knowledge)
- knowledge in HW interface(Ethernet) and communication (SPI)
- Knowledge in Simulation tools like MATLAB, LTSPICE & TINA
- knowledge in JIRA, JAMA and confluence (as a user)
- Windchill knowledge(PDM) as a user is must.
- Knowledge in GFCI & AFCI are added advantage for this position
