Formlabs 3d Printer Jobs in Usa

Doctor of Medicine | Radiology
- General/Other Location: Asheboro, NC Employer: Alumni Healthcare Staffing Pay: Competitive weekly pay (inquire for details) Contract Duration: 2 Weeks Start Date: ASAP About the Position Specialty Radiology State NC Location 364 White Oak St, Asheboro, NC Requirements Northern Light Medical Management
- Randolph Health is looking for temporary Mammography Specialist with General Dx and Light IR Responsibilities/Flouro Supervision coverage through 2025! Onsite shifts: M-F 8a-5p Job Locations: • Main Hospital
- 364 White Oak St.

Asheboro NC 27203 • MRI Center
- 237 N Fayetteville St B Asheboro NC 27203 Systems Used: • EMR: Meditech • PACS: Intelerad • VR: Fluency • Fluoroscopy Procedures: Perform real-time imaging to assist in diagnostic and therapeutic procedures.

• General Radiology: Conduct and interpret routine imaging exams such as X-rays CTs and MRIs.

Mammography Specialist with General Dx and Light IR Responsibilities/Flouro Supervision – Onsite 8a-5p Breast Imaging: Perform and interpret imaging procedures such as:3D mammographyDigital mammographyBreast ultrasoundsDiagnostic Procedures: Conduct stereotactic and ultrasound-guided breast biopsies.

Fluoroscopy Procedures: Supervise and assist in diagnostic and therapeutic procedures.

3-4/day General Radiology: Conduct and interpret routine imaging exams such as X-rays CTs and MRIs.

Light Interventional Procedures: Not a 100 IR Position No IR Call Perform non-complex procedures such as: 5-6/dayImage-guided biopsiesDrainagesKyphoplastyPICC line placementsParacentesis and thoracentesis Schedule Days, Monday to Friday, 8a-5p Dates Needed
- Alumni Healthcare Staffing offers: Weekly Direct Deposits Travel and Lodging Provided if Needed A Rated Malpractice Coverage 24/7 Availability of your Recruiting Consultant & Credentialing Staff If you have availability for this job or are interested in other opportunities, please send an updated CV or contact me today.

Danielle Dick (9 aa415a4b-8b21-40fc-a65c-70d2b25ca29a

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Job Overview

Effectively design, develop, and document medical devices and medical equipment that satisfy internal and external customer needs and business objectives.

Job Responsibilities and Essential Duties

* Interprets customer specifications to define requirements for mechanical designs.

* Performs first principal analysis related to appropriate aspects of mechanical design.

* Provide support to peers, Jr Engineers, and Co-Ops.

* Applies the 3D CAD system to create mechanical design and drawings.

* Develops detailed fabrication and assembly drawings and performs tolerance analysis.

* Develop prototypes for design evaluation.

* Troubleshoot and resolve design & processing issues.

* Contributes to details of design documentation using electronic documentation systems.

* Collects, analyzes, and interprets data to propose recommendations.

* Develops & execute design verification protocols and technical reports.

* Work with internal and external resources on fabrication, inspection, and testing of new product parts and assemblies.

* Develop & debug prototype tooling / equipment and processes.

* Develop test methods and fixtures.

* Formulate plans & methods to accomplish assignments with appropriate oversight.

* Works independently and prioritizes assigned tasks with guidance.

* Contribute to project planning activities.

* Train technicians and operators on new process techniques.

Minimum Requirements

* BS in engineering discipline, mechanical preferred.

* Minimum 2-4 years related experience, or an MS and less than one year experience.

* Experience with a solid modeling CAD program, preferably SolidWorks and/or ProE.

* Experience in medical equipment / device design with experience in electromechanical, electro- pneumatic, and/or blood pumping equipment development.

* Knowledge in medical device industry regulations and practices - ISO 13485, ISO 7198 & GMP.

* Proficiency with Microsoft Windows, MS Office applications, and Adobe Acrobat.

* Experience with Microsoft Visio and Microsoft Project preferred.

Required Knowledge, Skills, and Abilities

* Design for Manufacturability and Assembly, DFM&A (cost/tooling/process considerations), preferably using SolidWorks CAD software.

* Understanding in design and development of injection molded plastic, plastic extrusion, casting, sheet metal, metal stampings, additive manufacturing processes, and machined metal components, and assemblies with high part counts highly desirable.

* Knowledge of mechanical design and development using metric ANSI/ISO dimensioning and drafting standards highly desirable.

* Understanding of GD&T, mechanical measurement and testing equip., and statistical analysis of test data.

* Experience with electronic document control systems in medical device and/or medical equipment design and development.

* Highly skilled at analytical reasoning, mechanism design, creative problem solving, and mathematical analysis.

* Ability to create and meet scheduled timelines (manage and coordinate tasks as required).

* Ability to work in a team environment.

* Strong communication skills.

* Competent in use of Microsoft Office tools.

* Ability to operate test equipment such as various pressure and flow measurement equipment, temperature/humidity chambers, PC-based data recorders, simulators, DVM's and oscilloscopes.

* Familiarity and the ability to operate basic shop equipment such as hand tools, a drill and Dremel.

* Understand and interpret simple wiring diagrams.

* Familiarity with Agile Scrum and waterfall project planning methods

This is a "Defined Term" assignment that will last approximately 6 months or until project is complete. Defined Term employees are eligible for most benefits (including health insurance and paid time off) while on assignment.

#LI-AS1

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

The Opportunity

The Institute of Simulation and Training (IST) at the University of Central Florida (UCF) is seeking applicants for a full-time, 12-month, non-tenure earning, embedded research training and engineer-oriented, research position. This is a full-time Contract and Grants (C&G)-based faculty position to support ongoing federally sponsored research in a long-standing and agile R&D lab. For information about the Institute for Simulation and Training and the Orlando area, see .

We are seeking an Assistant In Embedded Training Researcher/Software Engineer with expertise in advanced algorithms and software development, computer visualization, and immersive training technologies to support the design, development, and implementation of next-generation embedded, visual, and intelligent research training systems. The successful candidate will join a multidisciplinary team conducting applied research in simulation-based training, modeling, and opportunity-based training systems.

Key Responsibilities

• 
  

• Research, design, develop, and implement software to enhance training in real-world and 3D environments. Develop high-fidelity visual simulation and application prototypes.

  
  

• Research and develop frameworks for embedded hardware and software for advanced embedded training systems.

  
  

• Work with interdisciplinary teams including engineers, cognitive scientists, and domain experts to define research objectives, design experiments, and analyze results.

  
  

• Create prototypes and capabilities demonstrators to showcase IST's expertise aligned with trends and opportunities.

  
  

• Design and execute hands-on demonstrations and exhibits at strategic events.

  
  

• Perform embedded hardware and software research and contribute to peer-reviewed publications.

  
  

Minimum Qualifications:

A master's degree from an accredited institution in a field related to computer science or computer engineering and two years of related professional experience, or a bachelor's degree from an accredited institution in a field related to computer science or computer engineering and five years of related professional experience.

Strong applicants will have experience in at least three of the following areas:

• 
  
• Augmented Reality/Virtual Reality concepts and development experience
  
• Artificial Intelligence use
  • 
    
  • Working knowledge of Unity's ML Agents or similar systems
    
  • Computer Vision applications development using AI techniques
    
  
  
  
• C, Objective C, C++, C#, Java or Python software languages
  
• Windows, Linux and Mac operating system cross-platform coding techniques
  
• Mobile platform application development (Android and IOS)
  
• Understanding of small, low-powered, and embedded hardware
  
• Embedded software authoring for IOT devices
  
• Knowledge of commercial game engines such as Unity and Unreal
  

Preferred Qualifications:

• 
  

• Embedded software design and development (e.g. Arduino)

  
  

• Knowledge using visual development environments such as: IntelliJ, Xcode, Visual Studio, Qt Creator, Eclipse, and MonoDevelop.

  
  

• Network design and optimization

  
  

• Understanding of geospatial and cartographic concepts

  
  

Additional Application Materials Required:

UCF requires all applications and supporting documents be submitted electronically through the Human Resources employment opportunities website, jobs/. In addition to the online application, interested candidates should upload the following:

• 
  

• A curriculum vitae.

  
  

• A letter of interest describing qualifications for the position, such as research agenda and teaching experience/interest.

  
  

NOTE: Please have all documents ready when applying so they can be simultaneously uploaded. Once the online submission process is finalized, the system does not allow applicants to submit additional documents later.

The selected candidate will be required to submit official transcripts (and, as applicable, U.S. degree equivalency evaluations) documenting the conferral of their qualifying academic credentials.

Questions regarding this search should be directed to: Dean Reed at .

Special Instructions to the Applicants:

Sponsorship for employment-based visas will only be considered under exceptional circumstances and is not guaranteed. Preference will be given to candidates who are currently authorized to work for any employer in the United States.

The position requires U.S. citizenship for a University-sponsored application for a security clearance. This position is funded by contract and grant sources and is contingent upon available funding.

Job Close Date:

Open until filled.

Are you ready to unleash YOUR potential?

As a next-generation public research university and Forbes-ranked top employer in Florida, we are a community of thinkers, doers, creators, innovators, healers, and leaders striving to create broader prosperity and help shape a better future. No matter what your role is, when you join Knight Nation, you'll play an integral role at one of the most impactful universities in the country. You'll be met with opportunities to connect and collaborate with talented faculty, staff, and students across 13 colleges and multiple campuses, engaging in impactful work that makes a positive difference. Your time at UCF will provide you with many meaningful opportunities to grow, you'll work alongside talented colleagues on complex projects that will challenge you and help you gain new skills and you'll have countless rewarding experiences that go well beyond a paycheck.

Working at UCF has its perks!UCF offers:

• 
  
• Benefit packages, including Medical, Dental, Vision, Life Insurance, Flexible Spending, and Employee Assistance Program.
  
• Paid time off, including annual (12-month faculty) and sick time off and paid holidays.
  
• Retirement savings options.
  
• Employee discounts, including tickets to many Orlando attractions.
  
• Education assistance.
  
• Flexible work environment.
  
• And more...For more benefits information, view the UCF Employee Benefits Guideclick here.
  

Unless explicitly stated on the job posting, it is UCF's expectation that an employee of UCF will reside in Florida as of the date the employment begins.

Additional Requirements related to Research Positions:

Pursuant to Florida State Statute 1010.35, prior to offering employment to certain individuals in research-related positions, UCF is required to conduct additional screening. Applicants subject to additional screening include any citizen of a foreign country who is not a permanent resident of the U.S., or who is a citizen or permanent resident but is affiliated with or has had at least 1 year of education, employment, or training in China, Cuba, Iran, Russia, North Korea, Syria, or Venezuela.

The additional screening requirements only apply to research-related positions, including, but not limited to faculty, graduate positions, individuals compensated by research grants or contract funds, post-doctoral positions, undergraduate positions, visiting assistant professors, and visiting research associates.

Department

Work Schedule

Type of Appointment

Expected Salary

As a Florida public university, the University of Central Florida makes all application materials and selection procedures available to the public upon request.

UCF is proud to be a smoke-free campus and an E-Verify employer.

If an accommodation due to a disability is needed to apply for this position, please call or email .

For general application or posting questions, please email .

Michelin is hiring!

- - - - - - - - - - - -

This opportunity is in Woodburn, Indiana in our BF Goodrich tire plant. Woodburn is a small town located about 30 mins east of Fort Wayne, IN. Fort Wayne is the cultural and economic center of northeastern Indiana and the second largest city in Indiana. Established in 1961, our plant makes passenger and light truck tires.

THE OPPORTUNITY

Michelin has an immediate opening for an Electrical / Automation Engineer to lead, design, and implement electrical and automation solutions to improve our performance in safety, quality, productivity, delivery, cost, and innovation. Michelin's purpose is to support everyone's right to move freely to find their better way forward. Innovation and performance open mobility opportunities to people who were limited geographically or economically before. Entry level training is provided by Michelin and will include formal classes and on-the-job mentoring under an experienced area expert. If respect for people, teamwork and trust are some values you live by you should consider joining us, the Worldwide leader in Tires!

Michelin / BFG is a global tire manufacturing company in the middle of an exciting digital transformation, with a vision of factory of the future using advanced robotic technology and data-driven engineering solutions. We are seeking a highly skilled and motivated Automation Engineer to join our BFG Manufacturing Engineering team near Fort Wayne, Indiana. As an Automation Engineer, you will play a crucial role in designing and implementing automation solutions that drive efficiency and productivity across our manufacturing operations. You will be responsible for leading projects from conception to completion, collaborating with cross-functional teams to develop innovative solutions that leverage advanced technologies such as smart material handling, robotics, AGV, ASRS, vision systems, machine learning and artificial intelligence.

WHAT WILL YOU DO

• Conduct pre-studies, prototypes, and pilots to capture business requirements and determine the best solutions in terms of costs/benefits, deadlines, risks, and functional capabilities.
• Design, build, and lead implementation projects to improve plant performance by replacing outdated systems, improving existing equipment, or adding new innovations to make progress.
• Implement and monitor actions necessary to mitigate risks (calculations, simulations, tests, etc.)
• Implement best practices for automation design and development, including worldwide sharing of best practices.
• Develop and maintain relationships with suppliers, vendors and contractors.
• Stay up-to-date with emerging trends and technologies in automation.
• Provide detailed electrical design and automation programming for assigned projects.
• Provide estimates and technical schedules for all phases of process equipment addition, replacement or upgrade.
• Provide backup support and training to plant maintenance teams on new automation systems that they implement.

Additional for Senior Level

• Start to finish technical Project Management including risk, schedule, budget, and resources.
• Lead/Participate in system approvals, qualification, and validation of industrial robustness.
• Manage change requests, approvals, and change testing.
• Assist local technicians in troubleshooting and root cause analysis as needed.
• Interface with internal company support groups to accomplish objectives and provide contract engineering management and direction when needed.

WHAT WILL YOU BRING

• Bachelor's degree in Electrical Engineering, Automation, or related field, or equivalent technical experience.
• Ability to set and achieve goals with minimum supervision.
• Success in working with other people or a team to meet a common objective.
• Developed/implemented team or group project plans that met or exceeded expectations.
• Demonstrated attention to detail and data accuracy in previous work.
• Experience with electrical design standards and able to complete controls systems designs using standard CAD design tools.
• Knowledge of PLC programming standards & programming software, including GRAFCET, Ladder Logic, and Structured Text. Specific experience with Rockwell / Allen Bradley is a must, with Siemens being a plus.
• Experienced with controls systems network interfaces and various protocols for communications between devices including computer system databases.
• Experienced with Variable Frequency drives and Motion Control technologies. Specific experience with Rockwell, Siemens and Control Techniques is a plus.
• Experienced with HMI configuration, programming, and communication. Specific experience with Rockwell is a plus.
• Experience with electrical design standards and ability to complete power and controls system designs using standard CAD design tools.

Additional for Senior Level

• Minimum 2-5 years' experience in a similar role or 5-7 years in a manufacturing maintenance area.
• Able to prioritize and handle multiple projects simultaneously.
• Ability to work well under pressure and handle strict deadlines.
• Develop and maintain technical documentation for automation solutions.
• Analyze and troubleshoot complex technical issues related to automation solutions.
• Ability to mentor and train junior engineers
• Proven experience in project management, from conception to completion
• Strong understanding of procurement, installation, commissioning, and programming of automation systems
• Strong experience with PLC programming
• Vision System configuration and interface for width measurement applications and defect detection applications is preferred, but not required. Specific experience with Cognex, Keyence, Adept, Bytewise, Gocator is a plus.
• Robotic experience, configuration or knowledge is preferred, but not required. Specific experience with Fanuc or Yaskawa is a plus.
• Experience with advanced robotic technologies such as AGV, ASRS, vision systems, machine learning and artificial intelligence

Join our team and be a part of our global digital transformation journey towards factories of the future. If you have a passion for automation, project management and advanced robotic technologies, we encourage you to apply today. We care about giving people a better way forward as we manufacture the future.

#LI-HIRINGMICHELIN

#LI-RM1

Inspire Motion for Life: Apply Today!

As the leading mobility company, we work with tires, around tires and beyond tires to enable Motion for Life. Dedicated to enhancing our clients' mobility and sustainability, Michelin designs and distributes the most suitable tires, services and solutions for our customers' needs. Michelin provides digital services, maps and guides to help enrich trips and travels and make them unique experiences. Bringing our expertise to new markets, we invest in high-technology materials, 3D printing and hydrogen, to serve a wide a variety of industries-from aerospace to biotech. Headquartered in Greenville, South Carolina, Michelin North America has approximately 23,000 employees and operates 34 production facilities in the United States and Canada.

MICHELIN tires have been ranked the #1 Tire Brand across major categories and segments by industry experts and consumers alike. For nearly three decades we've been recognized for our achievements in Customer Satisfaction, Performance, Durability, Technology and Innovation.

Michelin cares for the personal and professional development of its employees. We support career advancement through various options, which include: skill and career development, training, career exploration and work with cross-functional teams. We offer the possibility of a varied and fulfilling career path in an environment where unique contributions are valued.

Michelin offers 10 Business Resource Groups (BRGs) which are all-inclusive groups created and led by employees who have shared life experiences across various diversity dimensions. Each group supports business strategies and initiatives along with meeting the needs of members. The goal of each group is to help employees feel welcome and included, support employee engagement and encourage professional development. BRGs also provide cross-cultural support, career management resources and opportunities for community involvement.

Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .

This position is not available for immigration sponsorship.

Get in the driver's seat and be on your way to a meaningful professional journey!

Build a Career That Matters with One of the World's Most Respected Employers!

- - - - - - - - - - - -

THE OPPORTUNITY

This opportunity is in Woodburn, Indiana in our BF Goodrich tire plant. Woodburn is a small town located about 30 mins east of Fort Wayne, IN. Fort Wayne is the cultural and economic center of northeastern Indiana and the second largest city in Indiana. Established in 1961, our plant makes passenger and light truck tires.

WHAT YOU WILL BRING

• The Electrical Engineer provides project management and technical support for the design and construction of electrical site work, utilities, and buildings. Education and work experience requirements

• BS Electrical Engineering for Design and Procurement Phases with 5+ years of experience on industrial projects preferred. Degree or Significant Experience for Industrial Construction and acceptance phases 5+ years of experience with degree or 10+ years of experience with field supervision on industrial projectsrequired.

• Professional Engineering License is a plus.

• Demonstrated leadership experience.

• Demonstrated strong organizational skills and project management ability.

• Strong skills in written and verbal communication.

• Demonstrated ability to set and achieve goals with minimum supervision and the ability to suggest and implement ideas to bring value to the team.

• Demonstrated solid teamwork, communication, and planning skillsrequired.

• Demonstrate good understanding of electrical designs and practices for medium and low voltage distribution systems, building power, emergency power and lighting distributions, fire detection, data and networking,intrusionand access control, BMS controls and automation, lighting protection systems,groundingand bonding.

• Software Proficiency Requirements: Microsoft Excel, Project, Word.

• Completed 10-hour OSHA safety training.

• Demonstrate a professional attitude by treating each person with respectonthe job.

WHAT YOU WILL DO

1 - Design Phase

a) Work with the design teamdailyto answer questions, monitor the design, and evaluate progress.

b) Participate in design reviews at 30%, 60%, 90%, and final detail design review and IFC documentation.

c) Participate in 3D Model conflict resolution by disciplines.

d) Participate in the analysis of design proposals as part of the Michelin Design Team under the direction of the Michelin Design leader.

e) Conduct analysis and provide weekly reports concerning the proposed technical solutions, costs, staffing plan, completion schedule,permittingplans, and other details provided by each EPC. Evaluate and grade the proposals providing recommendation to Michelin.

f) Provide a risk analysisforthe technical concepts for all systems and equipment.

g) AssistMichelin with change management by evaluating technical solutions, completing estimates, providing a riskanalysisand supporting the procurement manager as needed with information.

2 - Procurement Phase

Review material and construction packages with the EPC company prior to issue. Provide a report concerning the quality of the package and adherence to the contract requirements.

b) Review the top 2 responses to each procurement package. Provide a report concerning the quality of the package and adherence to the contract requirements.

c) Review material and equipment shop drawings after review by the EPC company. Provide a report concerningthe adherenceto the contract requirements.

3 - Construction Phase

a) Participate in pre-construction meetings and provide input and comments to the meeting to add value to the construction process.

b) Planning for construction and authorization to start construction.

c) Validatereadiness of GC and subs for task execution based on preplanning action list.

d).Finalizea workscope and schedule with Site management.

e). Setup safety work expectations with GC and subs

f). Setup QA and task acceptance expectations with GC and subs.

g).FinalizeandapproveSchedule targets for GC and subs. Supplement schedule with the risk matrix and recovery plans.

h) Authorization to start construction.

c) Determine a construction material testing programin syncwith the construction activity. Quality testing concerning equipment testing, cable testing, welding, etc. must be considered in the testing plan.

d) Manage the on-site operations of the quality test technicians who will execute the quality testing plan. Following NETA testing guidelines. Receive and analyze testing reports. Takeactionsto minimize schedule impact if a test does not pass.

e) All activities will havean initialinspection conductedperthe pre-construction meeting. Witness the work and approve of the methods andthe final result. Work with the contractor on the remedies and deficient items.

f) Afterinitialinspection and approval of method and results confirm that all work will match theinitialinspection requirements. Monitor andobservethe quality of the work and drive corrections and punch list process to achieve the correct level of quality.

g) Make observations concerning the work methods, equipment, rigging, etc. used on site by the contractor.Record violations of Michelin rules, regulations, goodpractices. Makecorrections asnecessary in the field. Special focus shall be made on fall protection, rigging, Lockout, Tagout, Tryout, Arc flash safety, shock hazard protection, and welding.

h) AssistMichelin with change management by evaluating technical solutions, completing estimates, providing a riskanalysisand supporting the procurement manager as needed with information.

i) Track system installation versus major milestones andidentifyconflicts and risks of late milestone completion.

j) Answer RFI's, evaluate Change Orders as delegated by theteamleader. Participate in project reviews withMichelinProject Team.

k) Attend weekly contractormeetingsand weekly Safetymeetings.

4 - Final Completion and Acceptance

a) Evaluate the design documents and make acceptance filesin accordance withMichelin direction.

b) Ensure the contractor develops a punch list and corrects all items in preparation for building acceptance.

c) Inspect the completed areas and record acceptance or non-acceptance on the documents. Drive the contractor to complete the non-accepted items to meet the contract completion dates.

d) Coordinate with Michelin Construction, safety, environmental, and maintenance and includetheir representativesand comments in the final acceptance process and documents.

e) Verify as built drawings. Check all drawings against physical installation. Note items where the as built is not correct and drive the EPC contractor to properly complete theas-builtdrawings.

#LI-RM1

#LI-HIRINGMICHELIN

Ready to Shape the Future of Innovation?

Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.

The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.

Why Michelin?

• Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.

• Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Connected Communities.

• Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.

• Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.

Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .

This position is not available for immigration sponsorship.

We build the future with people like you. Begin your career with Michelin today!

Build a Career That Matters with One of the World's Most Respected Employers!

- - - - - - - - - - - -

THE OPPORTUNITY

Michelin has openings for Summer 2026 Internships in Chemical, Mechanical, Industrial, Occupational Health and Safety, and Human Resources. This opportunity is located at our Norwood, NC site. Michelin's purpose is to support everyone's right to move freely to find their better way forward. If respect for people, teamwork and trust are some values you live by you should consider joining us, the Worldwide leader in Tires!

Michelin, the leading mobility company, is working with tires, around tires and beyond tires to enable Motion for Life. Dedicated to enhancing its clients' mobility and sustainability, Michelin designs and distributes the most suitable tires, services and solutions for its customers' needs. Michelin provides digital services, maps and guides to help enrich trips and travels and make them unique experiences. Bringing its expertise to new markets, the company is investing in high-technology materials, 3D printing and hydrogen, to serve a wide variety of industries - from aerospace to biotech.

Norwood, North Carolina is the perfect place to start your career while enjoying life outside of work. Set on Lake Tillery and close to the National Forest, it's a great spot for boating, hiking, and weekend adventures. With affordable living, a friendly community, and easy access to Charlotte's nightlife and opportunities, Norwood combines small-town comfort with big-city convenience. For young professionals joining Michelin, it's a place to grow your career and enjoy an active lifestyle.

Get in the driver's seat and be on your way to a meaningful professional journey!

Ready to Shape the Future of Innovation?

Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.

The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.

Why Michelin?

• Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.
• Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Business Resource Groups and Inclusion Councils.
• Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.
• Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.

Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .

This position is not available for immigration sponsorship.

We build the future with people like you. Begin your career with Michelin today!

• 
  
• Directly supervise and train manufacturing staff of the assigned area.
  
• Lead, coach, and support the team's growth to reach maximum throughput.
  
• Conduct daily standup meetings, discussing goals, needs, and solutions.
  
• Prepare daily reports against planned manufacturing targets.
  
• Ensure all leads have the necessary materials, tools and documents are adequate for an upcoming shift.
  
• Identify areas of improvement and collaborate cross-functionally on solutions.
  
• Enforcement of OSHA standards and corrective action.
  
• Perform 7S and Lean projects.
  

• 
  
• A minimum of 5 years of experience in a component (CNC) manufacturing environment.
  
• Experience leading a team within a CNC manufacturing environment for machining, deburring and assembly.
  
• Experience in manufacturing for the Aerospace industry
  
• Self-motivated, hands-on, with a practical mindset, and capable of setting and reaching ambitious goals.
  
• Proficient in the use of Microsoft Office Suite Software, ERP Systems (EPICOR), Outlook, and others as needed.
  

• 
  
• Bachelor's degree in Mechanical, Systems Engineering or equivalent, or work equivalent.
  
• Excited about taking on new challenges in a fast-paced environment (3D Printing Manufacturing a plus)
  
• Self-motivated, hands-on, practical mindset.
  
• Strong sense of ownership.
  
• High mathematical reasoning and aptitude.
  

TOOLMAKER III

BENEFITS

• 15% Shift Premium - 2ND SHIFT ONLY
• Medical & Vision Insurance
• Supplemental Insurance Plans Available
• Dental Insurance (Company paid)
• STD and Life & AD&D Insurance (Company paid)
• 401(K) Matching
• PTO & Unpaid Excused Absences
• Uniforms (Company paid)
• Training & Apprenticeship Opportunities
• Safety Shoe & Glasses Reimbursement Program
• Gym Membership Reimbursement Program

JOB SUMMARY

As a Toolmaker III, you play a critical role in developing and optimizing advanced tooling solutions for manufacturing processes. Leveraging your extensive experience and expertise as a toolmaker, you are responsible for designing, fabricating, manufacturing, and maintaining complex tools, dies, molds, and fixtures. Your role involves collaborating with cross-functional teams, providing technical guidance, and leading projects to drive process improvements and efficiency gains.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Interprets complex engineering drawings, blueprints, and specifications to identify tooling requirements and constraints.
• Utilizes advanced computer-aided design (CAD) software to help create intricate 2D and 3D models of tooling components, ensuring optimal design and manufacturability.
• Directs the Toolmaker Is and IIs on daily tasks.
• Operates various precision machine tools, including CNC machines, EDM machines, grinders, and lathes, to fabricate and modify complex tooling components.
• Conducts thorough inspections and dimensional checks using advanced metrology equipment to ensure the accuracy and quality of finished tooling components.
• Assembles, fits, and tests intricate tooling components, verifying functionality, performance, and conformance to specifications.
• Leads cross-functional teams in developing and optimizing tooling designs, collaborating with engineers, production personnel, and quality assurance teams to drive innovation and efficiency.
• Troubleshoots and resolves complex tooling-related issues, utilizing root cause analysis and implementing corrective actions to improve performance and reliability.
• Develops and implements preventative maintenance programs to ensure tooling assets' longevity and optimal performance.
• Generates comprehensive documentation, including design records, modification logs, and maintenance reports, to maintain accurate records and facilitate knowledge transfer.
• Provides technical guidance and mentorship to Toolmaker Is and IIs, fostering a culture of continuous learning and skill development.

The above list reflects the general details necessary to describe the principle and essential functions of the position. It shall not be construed as the only duties that may be assigned for the position. An individual in this position must successfully perform the essential duties and responsibilities listed above. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position.

MINIMUM QUALIFICATIONS

• Strong attention to detail, organization, and leadership skills.
• Ability to follow written and verbal directions.
• Strong teamwork skills.
• 5+ years of experience working with molds and dies.
• 5+ years of experience working as a Toolmaker.
• Working knowledge of safety protocols.
• Ability to use shop mathematics, working with drawings, specifications, and formulas in tooling.
• Ability to pass Company-provided Overhead Crane and Forklift Operating Certifications.
• Proficient at using floor equipment such as grinders, mills, lathes, etc.
• Must possess own toolbox and tools for the position.
• Experience with CAD software.
• Ability to work with equipment used for making hydraulic lines and water circuits.
• Proficient in timing and fitting of die components.
• Ability to remain at or under budget on projects.
• Proficient knowledge of various steel grades, heat treat specifications, and coatings/texturings.

PREFERRED QUALIFICATIONS

• 10+ years of experience working with molds and dies.
• High school degree or equivalent.
• A Journeymans Tool & Die Makers Accredited Apprenticeship or two years of technical college training in the tool & die field.

PHYSICAL AND MENTAL DEMANDS

An employee must meet the physical and mental demands described here to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

• Stand, walk, push, pull, reach overhead, and bend to the floor.
• Exert 1 to 25 pounds of force 75% of the time.
• Exert 26 to 50 pounds of force 20% of the time.
• Exert 50 plus pounds of force 5% of the time.
• Ability to read machine dial gages, blueprints, precision measuring instruments, and computer screens.
• Read English and understand sketches, routings, safety rules, operating and maintenance instructions, and procedure manuals.
• Communicate effectively with employees.

WORKING ENVIRONMENT

The work environment characteristics described here represent those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

• Indoor shop-based position.
• Moderate noise levels from operating machines.
• Physical hazards from moving equipment and machine parts.
• Machining fumes, dust, and mist.
• Skin exposed to oils and cutting fluids.

Compensation details: 35-45 Hourly Wage

PIfe3072403d93-26289-39495701

Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts.

Valued at $1.6B, we're accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts.

Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond.

As a CAM Programmer, you will have direct responsibility for producing CAM packages and CNC Programs for highly complex, close-tolerance components. You will play a critical role within the company, sitting at the intersection of manufacturing and software R&D. This role is instrumental in developing and testing the technologies that will move the manufacturing industry forward and truly shape the future of manufacturing.

Responsibilities include generating precise CNC programs that align with our programming standards, directly contributing to the success of your teammates within CAM Operations by producing highly reliable, well-executed CAM files and efficient programs at a rapid pace.

The ideal candidate will possess an analytical mindset, viewing challenges as opportunities for improvement and innovation. They will systematically address and solve these challenges while contributing to Hadrian's knowledge base, covering tooling, application processes, workholding design, and manufacturing methodologies. Additionally, they should enrich our culture through proactive communication, teamwork, and carry themselves with the utmost integrity.

CAM Program and Component Process Deployment:

• Generate CAM files with detailed manufacturing intent, strictly adhering to Hadrian's design principles
• Craft clear, comprehensive work instruction documents suitable for all skill levels, specifically designed to empower individuals with minimal experience in machine tool setups to achieve success.

Internal Product Development:

• Be flexible working with ever-changing technology
• Improve internal automation software by providing feedback, identifying application process gaps, trends, and problems.
• Report factory bugs and general workflow issues as you encounter them, placing the utmost importance on promptly communicating issues or challenges that arise daily. No matter how small they are perceived to be.

CAM Process Optimization through Internal Feedback Integration:

• Actively seek out and incorporate feedback from team members and technical staff to boost productivity and refine machining programs and overall CAM process procedures.
• Create repeatable output across the production of hundreds of units, utilizing partner teams' feedback in the pursuit of continuous improvement opportunities.
• Rigorously identify gaps and communicate these findings to CAM Process Designers for integration or revision

Fixture Design and CAD Modeling:

• Design and model 3D fixtures conforming to Hadrian's fixture design standards with the Siemens NX CAD platform. Embrace advanced fixture design processes (e.g., 3-2-1 locating, Poka-Yoke error-proofing, equation-driven design) for creating efficient and robust fixtures.
• Adhere to industry-standard CAD design-tree practices and follow internally developed workflows

Software Proficiency:

• Operate efficiently within the hyperMILL and NX environments, utilizing best practices while fully leveraging Hadrian's automation suite for effective design and program creation.
• Maximize the use of Hadrian's Co-Pilot CAM integration throughout the CAM Programming process, fully leveraging it on a daily basis.
• Effectively utilize a variety of communication tools such as email, messaging applications, Microsoft Office suite, etc.

• Proven experience in programming 3 and/or 5-axis CNC machine tools within a production environment of high-tolerance precision components.
• Prior involvement in the aerospace sector or similar industries with stringent requirements.
• Knowledge of safety procedures, quality standards, and tool selection is essential.
• Average understanding of Geometric Dimensioning and Tolerances (GD&T).
• Capability to interpret data (such as CMM reports), identify trends, or tools needed to gather understanding of dimensional instability, and apply insights to enhance the manufacturing process.
• Demonstrated ability and willingness to try new things, adopt new approaches to the industry, and have the vision and discipline necessary to push through development scenarios within an operational setting.
• Demonstrated commitment to integrity while facing difficult production challenges and debugging issues. Valuing action and team-centric solutions over anything else.

• Advanced Materials: Steels, Stainless, Titanium, Inconel
• 5-Axis Proficiency and Mill-turn experience is a plus
• Proficiency in integrating probing routines within CNC programming
• Skills in manufacturing data analysis and software aiding this analysis are used to identify patterns, trends, and inefficiencies in the manufacturing process.
• Being a forever student of the trade. Maintaining awareness and understanding of current trends, technologies, and foundational practices such as Industry 4.0, IoT, Artificial Intelligence applications within manufacturing, and lean principles. Adaptability to evolving technologies and processes is fundamental to Hadrian's mission.

For this role, the target salary range is $110,000 - $165,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs.

• Medical, dental, vision, and life insurance plans for employees
• 401k
• Relocation support may be provided for certain situations, based on business need.
• Flexible vacation policy

ITAR Requirements

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.

Hadrian Is An Equal Opportunity Employer

It is the Company's policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

SKILLED TRADES WANTED

CNC Machinists • Welders • Electricians

Spears Manufacturing Co. | Caney, KS | Full-Time

Build. Fix. Program. Power. Repeat.

Spears Manufacturing is growing — and we’re hiring skilled trades professionals who take pride in precision, craftsmanship, and problem-solving.

This is not repetitive production work.
This is real hands-on industrial skill.

If you want a career where your ability matters — keep reading.

CNC MACHINISTS

Climate Controlled Environment

What You’ll Do:

• 
  
• Program, set up & operate CNC equipment
  
• Work with Hurco Mills & Romi Lathes (Fanuc / Winmax controls)
  
• Hold close tolerances ( 77; .002” or better)
  
• Read blueprints & tool drawings
  
• Select proper speeds, feeds & tooling
  
• Inspect precision parts
  

Experience With:

• 
  
• Conversational programming
  
• 3D Mill / Mastercam (plus)
  
• Conventional mill/lathe/surface grinder (plus)
  
• ID/OD mics, depth mics, indicators (.0005), sine plates, layout
  

We are NOT a high-volume production shop.
You must adapt to custom, changing work.

What We’re Looking For

Strong mechanical or electrical aptitude
Ability to work with minimal supervision
Dependable & focused
Pride in quality workmanship
Problem-solving mindset

Entry-level candidates with strong aptitude will be considered for select positions.

What We Offer

Competitive Pay (based on experience)
Medical & Dental & Vision after 90 days
Paid Life Insurance
401(k) with 4% Company Match
6 Paid Holidays
Paid Vacation
Long-Term Career Stability
Growth Opportunities

Why Spears?

• 
  
• Established, stable company
  
• Skilled trades environment
  
• Clean, professional facility
  
• Variety of work — not repetitive production
  
• Room to grow your skill and income
  

APPLY TODAY

Spears Manufacturing Co.
Caney, Kansas

Bring your skill. Build your future. Power your career.

Equal Opportunity Employer.

60;