Fault Failure Error Example Jobs in Usa

Summary:

The Senior Manufacturing / Process Engineer is responsible for developing, implementing, and improving manufacturing processes for electronic assemblies in a high-mix, low-volume environment. This role supports both the U.S. and Vietnam facilities, ensuring process repeatability, cost efficiency, and product quality across SMT, Through-Hole, and system assembly operations. The senior manufacturing process engineer will report directly to the VP of operations.

Goals:

• Build products and provide services with the highest Flexibility, Productivity, and Quality.
• Achieve total customer satisfaction through technical excellence and responsive engineering support.
• Ensure successful NPI launches through cross-functional collaboration, process validation, and data-driven feedback to design and quality teams.

Objectives:

1.      Support production operations in the following categories:

a.      Reduce downtime caused by engineering issues (programming, MPI errors, tooling, design, or line stoppage).

b.      Improve quality yield through root cause analysis, corrective actions, and robust process setup.

c.      Lead NPI and prototype builds, ensuring process readiness, documentation completeness, and manufacturability validation prior to production release.

2.      Provide engineering services to meet customer needs and expectations in the following areas:

a.      Design for Manufacturability (DFM).

b.      Manufacturing Process Instruction (MPI) creation and maintenance.

c.      Engineering Change Order (ECO) implementation.

d.      Defect Reduction Team (DRT) meetings and follow-up actions.

e.      Failure analysis and corrective action documentation.

f.       Develop and validate new or modified processes, including process capability studies, DOE validation, and reflow/wave solder profile optimization

g.      Other engineering requests as required by customers or management.

Job Description:

SMT / Through-Hole / 2nd Ops / 3rd Ops Process Support

1. Review daily SMT or build schedule to ensure process readiness.
2. Confirm all required items are complete and available prior to production:
3. Job package with full build documentation.
4. Manufacturing Process Instruction (MPI) reviewed and approved.
5. Routing definitions for data collection.
6. Validated reflow or wave solder profiles.
7. ECOs, deviations, or special instructions incorporated into the MPI and/or job package.
8. All required tooling available and verified.
9. Review pre-build DFM, document known defects, and hyperlink details in the MPI.
10. Lead cross-functional NPI kickoff meetings to review design requirements, risk areas, and special process considerations.
11. Document and track NPI issues and lessons learned for future builds.
12. Coordinate with Program Managers to resolve DFM showstoppers prior to build.
13. Analyze previous quality data, identify recurring defects, determine root causes, and implement corrective actions.
14. Design, order, and verify all required tooling (stencils, wave solder pallets, press-fit fixtures, conformal coat fixtures, etc.).
15. Maintain tooling logs, labeling, and readiness tracking within Omega Build Readiness.
16. Inspect and sign off first article setups for critical processes (stencil printer, reflow oven, wave solder, etc.) using the First Article Checklist.
17. Inspect initial boards after print and reflow for solder release, bridging, voids, and process anomalies. Document findings and sign off the First Article Report.
18. Provide on-the-floor training for operators and technicians regarding new processes, corrective actions, or observed deficiencies.
19. Support production by promptly responding to technical inquiries or line support issues.
20. Exercise full authority to stop the line if repeated defects or safety concerns are observed.

Quality Data Review & Root Cause Analysis

1. Review production data in Omega Data Collection, identifying root causes and corrective actions.
2. Review Daily, Weekly, and Customer Quality Reports to identify trends, recurring issues, or process gaps.
3. Provide structured analysis and report findings to Quality and Production (using 8D or equivalent methodology).
4. Document corrective actions and verify implementation during the next production run.
5. Present findings and improvement updates in internal and customer quality meetings.

Other Responsibilities:

1. Create and submit Post-Build DFM reports to Program Managers with improvement recommendations.
2. Implement and validate ECO changes per revision control procedures.
3. Perform and document detailed failure analyses for internal and customer returns.
4. Participate in process improvement projects and defect-reduction initiatives.
5. Provide customer-driven engineering services or special support requests.
6. Develop and deliver internal technical training for operators and peers.
7. Support ISO 9001 and AS9100 activities, including audits, documentation, and Work Instruction updates.

Qualifications:

• Bachelor’s degree in Manufacturing, Industrial, or Mechanical Engineering (or related discipline).
• 8–12 years of hands-on experience in electronics manufacturing (PCBA, box-build, system integration).
• Deep understanding of SMT, Through-Hole, and system assembly processes.
• Proficient in process validation, FAI, SPC, DOE, and yield improvement.
• Familiarity with FactoryLogix and related MES/ERP systems.
• Experience leading NPI builds and developing new assembly processes from prototype through production release.
• Familiarity with DFM/DFT analysis tools and PCB CAD systems (e.g., Altium, Valor, Mentor).
• Experience with Lean, Six Sigma, and structured problem-solving tools.
• Strong communication and analytical skills with the ability to multitask in a fast-paced environment.
• U.S. Citizen or Permanent Resident (ITAR requirement).

Compensation:

$120-$150K Annually

Benefits:

Medical

Dental

Vision

401K + Roth 401K

Vacation

Paid Holidays

Location: Auburn Hills, MI

Position: Long Term Contract (Possible Extension)

Title: 26-00326 - Manufacturing Process Engineer – BIW / General Assembly (Bilingual Spanish & English Required)

Job Description:

• Vehicle Process Engineer Specialist (Toluca Vehicles) will create, updating and maintenance of process documents that affect the current and new vehicle program(s) project(s) and includes working in different process areas BIW and General Assembly.

Responsibilities:

• Vehicle Process Engineer must be able to perform studies for assembly processes, process documents creation includes graphics & illustrations of the parts to be assembled and its development contains the identification of assembly risks through the use and implementation of Process Failure Mode and Effects Analysis (PFMEA) on current and new products. The previous activities includes the sequence analysis to install parts, the implementation of product and parts engineering specifications, process tools specifications, digital process simulation studies and interferences analysis related to current and new products parts and assemblies, as well as any other study related to required process, it will be performed under the acknowledgment and use of the following software applications: Teamcenter 11, Siemens NX (NX Unigraphics software), Mockup and Vis-Professional Version 14.1 visualizers, MS Visio 2016, Autodesk DWG TrueView 2019, MS PowerPoint and MS Office 2016, Snipping Tool Version 10, AMPS - Advanced Manufacturing Planning Systems (Client Internal System). These computer software applications will be used to define process and identify in advance any potential process risk with the use of PFMEA technique to ensure the correct integration of processes on time, in a safety matter and in accordance with product specifications.
• As part of Process Failure Mode and Effects Analysis (PFMEA) development, Vehicle Process Engineer will generate the initial list of PFMEAs to be carried out according to the new processes requirements. The definition of PFMEAs will be performed in mutual agreement with VPE Cars, WPI (Work Process Integration) and plant team members. Once the matrix of PFMEAs to be generated has been defined, Process Engineer will be responsible to schedule meetings in mutual agreement with VPE and plant, develop and lead the PFMEAs. For the creation of PFMEA it will be required to populate the process steps on the PFMEA form provided by VPE Cars /WPI, which includes process steps, identifying potential process risks, establishment of severity, occurrence and detection values, establishment of recommended actions, assignment of responsible for each created recommended action, creation of summary reports after each PFMEA review and document posting into WPI web. It also includes the follow-up of open recommended actions with responsible(s) up to which all the actions will be closed as well.
• Vehicle Process Engineer will be responsible to perform the new and update process documents for the current and new vehicle product programs produced by Toluca Plant, it includes all product parts end items, parts change last level released by product engineering that may affect the process(es) and the inclusion of the changes into the processes should be done considering the product implementation date specified in the engineering change Vehicle Process Engineer will be able to understand the product specifications included in the Engineering Bill of Material (EBOM) system, Product Change Notes (CNs) and Engineering Bulletins.
• It is expected after being familiar with the product specifications, Client systems use and process document requirements that the Vehicle Process Engineer will develop a new process page under the rate of 30 minutes and meet the quality required. If the process or PFMEA's documents performed by Vehicle Process Engineer contain mistakes or missing information, the time used to fix the errors and meet the quality requirements will be covered by Engineering Services.
• Vehicle Process Engineer will provide these services considering performing in the different process areas BIW and GA process areas, work under pressure, availability to travel, assistance on weekends and sometime holidays.
• Vehicle Process Engineer is responsible to keep the information managed updated, control the changes, and manage the process documents assigned as well as have them available into the corresponding systems indicated in accordance with the vehicle(s) program(s) needs established by IME/ME. The confidentiality of the documents generated must be maintained across all the vehicle programs and assigned projects.
• Assist the VPE Cars engineers in the generation of process documents, graphics and PFMEAs, as well as during the revision and updating of these documents.
• Support to VPE Cars engineers in the presentation required to identify the process and product changes related or any activity related to new models as well as to current vehicles (carry over).
• Assist to obtain the product specification, parts and plant information required by VPE Cars Process in order to develop the process documents, Graphics, PFMEA's and tasks needed due to product changes, plant request to improve or update the process documents during the implementation of new and carry over vehicles. The supplier personnel should follow the confidentiality policy.
• Engineering services must be following the official Mexican norms and regulations applicable to the processes safety, environmental that are considered into Product Specifications (Process Standards, Material Standards and Quality MQAS Mexico Client during the work assigned to supplier in the process areas and the plant location.
• Support parts and vehicle(s) model data finding in Teamcenter requested by IME in order to develop and update the new and current process documents, graphics and PFMEA's.
• Assist to obtain information to develop and follow up vehicle(s) KPI's, create weekly reports and support any task related to process documents, it will be performed using forms and tools from VPE and Program Vehicle(s) Management.

Requirements:

• Teamcenter 14
• Siemens NX
• VisPro 14.1
• AutoCAD
• MS Visio
• MS Office / PowerPoint
• AMPS Client
• PFMEA basic template
• EBOM Client
• CN's Client

Education / Training:

• Engineering Degree Required
• Speak and Write Spanish and English
• 2 years as minimum experience in manufacturing process, operation plants, a variety of manufacturing engineering.

Job Description At Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.

Millennium Space Systems, a part of Boeing Defense, Space and Security (BDS), is a fast, agile small satellite company focused on national security space.

Our missions have direct impact to global security, like missile warning and Earth observation.

Our team is curious, bold and innovative.

We take risks, innovate and explore new techniques and technologies.

We influence change because we challenge the status quo.

And when we watch our satellites launch, we know each one of us made it happen.

Job Summary Autonomy Engineering is focused on design, analysis, and development of mission Concepts of Operations (CONOPS) from customer use cases and requirements, and enabling mission success through comprehensive on-board fault management and autonomy.

Engineers in the group are integral throughout the entire program lifecycle.

They are key stakeholders in the design and validation of mission CONOPS and Design Reference Missions (DRM), and are leaders in comprehensive end-to-end software integration, validation, and testing.

They define the underlying architecture for fault detection, isolation, and response (FDIR), and own the development and validation of satellite/constellation specific fault configuration(s).

They are the chief architects and implementers of satellite/constellation autonomy, ensuring mission level objectives are met and spacecraft health and safety are always maintained.

As an Autonomy Engineer on the Autonomy Team, you will be the Responsible Engineering Authority (REA) for all Autonomy for a program, study, or proposal.

You will define fault & autonomy requirements; define states, modes, and transitions; define and develop the fault & autonomy architecture for satellites/constellations, including fault-tolerance and redundancy requirements; define and analyze thresholds and persistence of on-board fault tests; design fault responses to ensure containment of failed hardware and health and safety of on-orbit satellites; provide tools and procedures for use during on-orbit mission operations; and support on-console mission operations for on-orbit spacecraft as a mission specialist.

In addition to execution of technical design, analysis, and operation, you may be responsible for project management activities to support programs, ensuring that high-quality work products are delivered on-time.

This position's internal job code is Systems Engineer.

Our team is currently hiring for Levels 3.

Position Responsibilities: Perform fault and autonomy requirements definition, verification, and validation Define satellite/constellation states, modes, transitions, and other autonomous spacecraft behaviors Contribute to architecture concepts, CONOPS, and technology trade-off analyses Design and validate onboard fault detection, isolation, and responses and perform end-to-end validation of autonomy products and behaviors Support on-console operations for on-orbit missions Other duties as assigned This position is expected to be 100% onsite.

The selected candidate will be required to work onsite at one of the listed location options.

Security Clearance and Export Control Requirements This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R.

§ 120.15 is required.

"US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.

Basic Qualifications (Required Skills/Experience): 2 years experience in satellite design and/or operation Familiarity with common analysis tools such as MATLAB/Simulink, Python, STK, etc.

Exceptional critical thinking skills and an ability to notice and debug problems with minimal guidance Ability to anticipate effects and interactions for varying cases across a complex system Strong attention to detail while maintaining big-picture perspective This position requires the ability to obtain a U.S.

Security Clearance for which the U.S.

Government requires U.S.

Citizenship.

Preferred Qualifications (Desired Skills/Experience): 5 years experience in satellite design and/or operation Experience with fault management strategies/architectures for safety of mission critical systems Experience with autonomous system design and analysis Ability to plan and execute integrated system fault management and autonomy V&V (validation and verification) Experience with satellite end-to-end testing Possess active TS/SCI clearance Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process Drug Free Workplace: Millennium Space Systems, a Boeing Company, is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift: This role will be on 1st Shift Total Rewards: At Millennium Space Systems, a Boeing Company, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

Millennium Space Systems also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range: Level 3: $104,550
- $153,750 Millennium is DDTC-registered, ITAR-compliant Company.

This position is located at a facility that requires special access.

Applicants MUST be U.S.

citizens and eligible for a security clearance.

Additionally, applicants must be willing to apply for and maintain a security clearance.

We encourage all interested candidates to apply for any open position for which they feel they are qualified.

Applications for this position will be accepted until Mar.

26, 2026 Export Control Requirements: This position must meet U.S.

export control compliance requirements.

To meet U.S.

export control compliance requirements, a "U.S.

Person" as defined by 22 C.F.R.

§120.62 is required.

"U.S.

Person" includes U.S.

Citizen, U.S.

National, lawful permanent resident, refugee, or asylee.

Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship Employer will not sponsor applicants for employment visa status.

Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.aa415a4b-8b21-40fc-a65c-70d2b25ca29a

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Senior Flight Navigation Engineer at Reliable Robotics, you will be part of the Guidance, Navigation and Control Team. You will contribute to the navigation system design, implementation, and testing, and your work will enable the integration of uncrewed aircraft into the National Airspace System.

Responsibilities

• Define navigation system requirements in collaboration with internal and external stakeholders

• Analyze, source, and select sensor solutions for use in the navigation system

• Develop sensor models in simulation for evaluation of the navigation system

• Implement state estimation algorithms in flight software

• Establish test methods to ensure compliance with requirements, best practices, and regulatory standards

• Evaluate the navigation system performance via simulation, hardware-in-loop, and flight test cases

Basic Success Criteria

• MS in aerospace engineering, electrical engineering, computer science, or similar advanced degree

• Technical expertise in one of the following areas: Kalman filtering; GNSS navigation; inertial navigation; or alternative navigation technologies

• 8+ years of professional experience developing and testing navigation algorithms

• Professional experience with developing C/C++ flight software and Python data reduction & analysis

• Excellent written and verbal communication skills

Preferred Criteria

• PhD in aerospace engineering, electrical engineering, computer science, or similar advanced degree

• Technical expertise in one of the following areas: probability theory; fault detection and exclusion (FDE); sensor error/noise modeling; or GPS-denied navigation

• Experience developing software for safety critical applications

• Experience with navigation system certification

We are building high-integrity, safety-critical systems for automated flight, and your role is critical to what we do at Reliable Robotics. With the support of the whole team, you will contribute to a novel navigation system that drives our mission forward.

Must be willing to travel 25% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $200K - $300K

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Flight Navigation Engineer at Reliable Robotics, you will be part of the Guidance, Navigation and Control Team. You will contribute to the navigation system design, implementation, and testing, and your work will enable the integration of uncrewed aircraft into the National Airspace System.

Responsibilities

• Define navigation system requirements in collaboration with internal and external stakeholders

• Analyze, source, and select sensor solutions for use in the navigation system

• Develop sensor models in simulation for evaluation of the navigation system

• Implement state estimation algorithms in flight software

• Establish test methods to ensure compliance with requirements, best practices, and regulatory standards

• Evaluate the navigation system via simulation, hardware-in-loop, and flight test cases

Basic Success Criteria

• BS in aerospace engineering, electrical engineering, computer science, or similar advanced degree

• Technical expertise in one of the following areas: Kalman filtering; GNSS navigation; inertial navigation; or alternative navigation technologies

• 3+ years of professional experience developing and testing navigation algorithms

• Professional experience with developing C/C++ flight software and Python data reduction & analysis

• Excellent written and verbal communication skills

Preferred Criteria

• MS in aerospace engineering, electrical engineering, computer science, or similar advanced degree

• Technical expertise in one of the following areas: probability theory; fault detection and exclusion (FDE); sensor error/noise modeling; or GPS-denied navigation

• Experience developing software for safety critical applications

• Experience with navigation system certification

We are building high-integrity, safety-critical systems for automated flight, and your role is critical to what we do at Reliable Robotics. With the support of the whole team, you will contribute to a novel navigation system that drives our mission forward.

Must be willing to travel 10% of the time. This position is based at our facility in Mountain View, California.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $155K - $215K

Join the US Foods Team!

Ready to build a career with a company that's leading the foodservice industry?

Schedule: Monday - Saturday, w/two days off (must work Saturdays)

Pay: Our Non-CDL Delivery Drivers make $25.50/hour.

Benefits Begin Day 1! Medical, dental, vision, 401K, life insurance, strong safety culture, and much more!  Excellent local leadership.

ESSENTIAL DUTIES AND RESPONSIBILITIES  (Each item should account for 10% or more)
An individual must be able to satisfactorily perform each essential duty listed below.  The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Essential Job Functions:
• Lift up to 50 lbs. on a frequent basis and up to 100 lbs. on an occasional basis.
• Load and unload the vehicle for multi-stop deliveries.
• Transport deliveries by driving assigned vehicles.
• Use hand truck to move product from the delivery vehicle into the customer location including going up and down stairs with product as necessary.
• Accurately record delivery information including operating a hand scanner and all company required documentation.
• Responsible for the proper documentation and disposition for any return product.
• Communicate delivery- customer issues to proper authority (i.e., Customer Service, Territory Manager, Transportation Supervisor, etc.).
• Deliver product to each of the designated stops following the stop sequence provided for the day.
• Unload product safely and stage product in the space(s) designated by customer.
• Check invoice for complete delivery. Process paperwork and damaged merchandise if any.
• Collect payments if necessary.
• Monitor refrigeration system on the delivery vehicle on a consistent basis for safety; follow all safe food handling procedures.
• Perform pre-trip and post-trip inspections such as monitoring fluid levels, tires, windshield wash and replenishing fuel.
• Other duties as assigned.
***EOE Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Protected Veteran/Disability Status***

SUPERVISION
None

RELATIONSHIPS
Internal:   Transportation associates, Maintenance associates and other internal contacts
External: Customers

QUALIFICATIONS

Education/Training: 
High school diploma or general education degree (GED) preferred
Related Experience/Requirements:
Must be 21 years of age or older.
Valid U.S. driver’s license issued by the state of legal residence with proper endorsements if required. No more than two convictions in the past two-year period for traffic violations, no DUI convictions in the past three years, no driver’s license suspensions in the past three years. Must be able to pass DOT physical.
No commercial or professional driving experience required. One year of multi-stop delivery experience is preferred or six months local delivery experience and/or foodservice industry experience.
Hand cart delivery experience preferred.
Able to read, write and communicate in English as it relates to the job and safety regulations.
Must have basic math skills (add, subtract, multiply, divide).
Must pass pre-employment testing (including items such a Background Check)
Have knowledge of area and/or map reading abilities.
Use safe lifting and loading techniques
Great interpersonal/customer service skills.
Availability to work on weekends, Holidays and overtime in order to service customers
Knowledge/Skills/Abilities: 
To be successful in this position, the individual performing the duties must successfully demonstrate the following competencies:
• Building Customer Loyalty
• Managing Work
• Adaptability
• Building Trust
• Follow-up
• Communication
• Demonstrate Defensive Driving techniques
No more than two convictions in the past two year period for traffic violations. No more than one of these may be a serious as defined by DOT (e.g., leaving scene of an accident, reckless driving, homicide/assault, eluding police, at fault offense, refusing a breathalyzer test, committing a felony with a vehicle) violation or result of an accident - company or private vehicle; No DUI convictions within past three years, regardless of type of vehicle operated; no driver's license suspension within past three years (insurance and overweight tickets are excluded); and no termination by previous employer for failure to comply with safety regulations or for accident involvement.
Physical Requirements:
This work requires the following physical activities: climbing, bending, stooping, kneeling, twisting, reaching, sitting, standing, walking, and lifting up to 50 lbs. of material on a consistent basis, 100 lbs. on an occasional basis and repetitive motions. The work is performed primarily outdoors.
Physical Requirements: Must be able to pass DOT physical.  Must be able to work in extreme weather conditions.  Must be able to perform the following physical activities for described length of time:

OCCASIONALLY: 1% - 33%
FREQUENTLY: 34% - 66%
CONTINUOUSLY: 67% - 100%

JOB REQUIRES WORKER TO:
1. STAND Frequently 
2. WALK  Frequently 
3. DRIVE Frequently 
4. SIT Frequently

JOB REQUIRES WORKER TO LIFT:
1. 1-10 lbs. (Sedentary) Occasionally
2. 10-20 lbs. (Light) Frequently 
3. 25-50 lbs. (Medium) Frequently 
4. 50-100 lbs. (Heavy) Occasionally
5. Over 100 lbs. (Very Heavy) Occasionally

JOB REQUIRES WORKER TO CARRY:
1. 1-10 lbs. (Sedentary) Occasionally
2. 10-20 lbs. (Light)          Occasionally
3. 20-50 lbs. (Medium) Occasionally
4. 50-100 lbs. (Heavy) Occasionally
5. Over 100 lbs. (Very Heavy) Never

JOB REQUIRES WORKER TO:
1. Push/pull Frequently – e.g.: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift
2. Climb/balance Frequently – e.g.: In/Out Truck/Trailer (2 vertical steps) to cab.  On/Off ramp to ground level and side door steps and Platform of trailer.  Stairs, truck and delivery ramps.
3. Stoop/squat Occasionally
4. Kneel/bend Occasionally
5. Bend Frequently
6. Reach above shoulder Occasionally
7. Grasp objects Frequently – e.g.: Hand truck, boxes, cartons
Continuously - Steering wheel
 8. Manipulate objects  Frequently – e.g.: Boxes, dolly, metal truck ramp, hand truck, paper work, truck gate, straps
Continuously – e.g.: truck gear shift
9. Twisting   Frequently

Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law.  The expected base rate for this role is between $20.61 and $25.50.

This role will also receive overtime compensation.​

​Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here:

Join the US Foods Team!

Ready to build a career with a company that's leading the foodservice industry?

Schedule: Monday - Saturday, w/two days off (must work Saturdays)

Pay: Our Non-CDL Delivery Drivers make $25.50/hour.

Benefits Begin Day 1! Medical, dental, vision, 401K, life insurance, strong safety culture, and much more!  Excellent local leadership.

ESSENTIAL DUTIES AND RESPONSIBILITIES  (Each item should account for 10% or more)
An individual must be able to satisfactorily perform each essential duty listed below.  The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Essential Job Functions:
• Lift up to 50 lbs. on a frequent basis and up to 100 lbs. on an occasional basis.
• Load and unload the vehicle for multi-stop deliveries.
• Transport deliveries by driving assigned vehicles.
• Use hand truck to move product from the delivery vehicle into the customer location including going up and down stairs with product as necessary.
• Accurately record delivery information including operating a hand scanner and all company required documentation.
• Responsible for the proper documentation and disposition for any return product.
• Communicate delivery- customer issues to proper authority (i.e., Customer Service, Territory Manager, Transportation Supervisor, etc.).
• Deliver product to each of the designated stops following the stop sequence provided for the day.
• Unload product safely and stage product in the space(s) designated by customer.
• Check invoice for complete delivery. Process paperwork and damaged merchandise if any.
• Collect payments if necessary.
• Monitor refrigeration system on the delivery vehicle on a consistent basis for safety; follow all safe food handling procedures.
• Perform pre-trip and post-trip inspections such as monitoring fluid levels, tires, windshield wash and replenishing fuel.
• Other duties as assigned.
***EOE Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Protected Veteran/Disability Status***

SUPERVISION
None

RELATIONSHIPS
Internal:   Transportation associates, Maintenance associates and other internal contacts
External: Customers

QUALIFICATIONS

Education/Training: 
High school diploma or general education degree (GED) preferred
Related Experience/Requirements:
Must be 21 years of age or older.
Valid U.S. driver’s license issued by the state of legal residence with proper endorsements if required. No more than two convictions in the past two-year period for traffic violations, no DUI convictions in the past three years, no driver’s license suspensions in the past three years. Must be able to pass DOT physical.
No commercial or professional driving experience required. One year of multi-stop delivery experience is preferred or six months local delivery experience and/or foodservice industry experience.
Hand cart delivery experience preferred.
Able to read, write and communicate in English as it relates to the job and safety regulations.
Must have basic math skills (add, subtract, multiply, divide).
Must pass pre-employment testing (including items such a Background Check)
Have knowledge of area and/or map reading abilities.
Use safe lifting and loading techniques
Great interpersonal/customer service skills.
Availability to work on weekends, Holidays and overtime in order to service customers
Knowledge/Skills/Abilities: 
To be successful in this position, the individual performing the duties must successfully demonstrate the following competencies:
• Building Customer Loyalty
• Managing Work
• Adaptability
• Building Trust
• Follow-up
• Communication
• Demonstrate Defensive Driving techniques
No more than two convictions in the past two year period for traffic violations. No more than one of these may be a serious as defined by DOT (e.g., leaving scene of an accident, reckless driving, homicide/assault, eluding police, at fault offense, refusing a breathalyzer test, committing a felony with a vehicle) violation or result of an accident - company or private vehicle; No DUI convictions within past three years, regardless of type of vehicle operated; no driver's license suspension within past three years (insurance and overweight tickets are excluded); and no termination by previous employer for failure to comply with safety regulations or for accident involvement.
Physical Requirements:
This work requires the following physical activities: climbing, bending, stooping, kneeling, twisting, reaching, sitting, standing, walking, and lifting up to 50 lbs. of material on a consistent basis, 100 lbs. on an occasional basis and repetitive motions. The work is performed primarily outdoors.
Physical Requirements: Must be able to pass DOT physical.  Must be able to work in extreme weather conditions.  Must be able to perform the following physical activities for described length of time:

OCCASIONALLY: 1% - 33%
FREQUENTLY: 34% - 66%
CONTINUOUSLY: 67% - 100%

JOB REQUIRES WORKER TO:
1. STAND Frequently 
2. WALK  Frequently 
3. DRIVE Frequently 
4. SIT Frequently

JOB REQUIRES WORKER TO LIFT:
1. 1-10 lbs. (Sedentary) Occasionally
2. 10-20 lbs. (Light) Frequently 
3. 25-50 lbs. (Medium) Frequently 
4. 50-100 lbs. (Heavy) Occasionally
5. Over 100 lbs. (Very Heavy) Occasionally

JOB REQUIRES WORKER TO CARRY:
1. 1-10 lbs. (Sedentary) Occasionally
2. 10-20 lbs. (Light)          Occasionally
3. 20-50 lbs. (Medium) Occasionally
4. 50-100 lbs. (Heavy) Occasionally
5. Over 100 lbs. (Very Heavy) Never

JOB REQUIRES WORKER TO:
1. Push/pull Frequently – e.g.: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift
2. Climb/balance Frequently – e.g.: In/Out Truck/Trailer (2 vertical steps) to cab.  On/Off ramp to ground level and side door steps and Platform of trailer.  Stairs, truck and delivery ramps.
3. Stoop/squat Occasionally
4. Kneel/bend Occasionally
5. Bend Frequently
6. Reach above shoulder Occasionally
7. Grasp objects Frequently – e.g.: Hand truck, boxes, cartons
Continuously - Steering wheel
 8. Manipulate objects  Frequently – e.g.: Boxes, dolly, metal truck ramp, hand truck, paper work, truck gate, straps
Continuously – e.g.: truck gear shift
9. Twisting   Frequently

Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law.  The expected base rate for this role is between $20.61 and $25.50.

This role will also receive overtime compensation.​

​Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here:

Join the US Foods Team!

Ready to build a career with a company that's leading the foodservice industry?

Schedule: Monday - Saturday, w/two days off (must work Saturdays)

Pay: Our Non-CDL Delivery Drivers make $25.50/hour.

Benefits Begin Day 1! Medical, dental, vision, 401K, life insurance, strong safety culture, and much more!  Excellent local leadership.

ESSENTIAL DUTIES AND RESPONSIBILITIES  (Each item should account for 10% or more)
An individual must be able to satisfactorily perform each essential duty listed below.  The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Essential Job Functions:
• Lift up to 50 lbs. on a frequent basis and up to 100 lbs. on an occasional basis.
• Load and unload the vehicle for multi-stop deliveries.
• Transport deliveries by driving assigned vehicles.
• Use hand truck to move product from the delivery vehicle into the customer location including going up and down stairs with product as necessary.
• Accurately record delivery information including operating a hand scanner and all company required documentation.
• Responsible for the proper documentation and disposition for any return product.
• Communicate delivery- customer issues to proper authority (i.e., Customer Service, Territory Manager, Transportation Supervisor, etc.).
• Deliver product to each of the designated stops following the stop sequence provided for the day.
• Unload product safely and stage product in the space(s) designated by customer.
• Check invoice for complete delivery. Process paperwork and damaged merchandise if any.
• Collect payments if necessary.
• Monitor refrigeration system on the delivery vehicle on a consistent basis for safety; follow all safe food handling procedures.
• Perform pre-trip and post-trip inspections such as monitoring fluid levels, tires, windshield wash and replenishing fuel.
• Other duties as assigned.
***EOE Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Protected Veteran/Disability Status***

SUPERVISION
None

RELATIONSHIPS
Internal:   Transportation associates, Maintenance associates and other internal contacts
External: Customers

QUALIFICATIONS

Education/Training: 
High school diploma or general education degree (GED) preferred
Related Experience/Requirements:
Must be 21 years of age or older.
Valid U.S. driver’s license issued by the state of legal residence with proper endorsements if required. No more than two convictions in the past two-year period for traffic violations, no DUI convictions in the past three years, no driver’s license suspensions in the past three years. Must be able to pass DOT physical.
No commercial or professional driving experience required. One year of multi-stop delivery experience is preferred or six months local delivery experience and/or foodservice industry experience.
Hand cart delivery experience preferred.
Able to read, write and communicate in English as it relates to the job and safety regulations.
Must have basic math skills (add, subtract, multiply, divide).
Must pass pre-employment testing (including items such a Background Check)
Have knowledge of area and/or map reading abilities.
Use safe lifting and loading techniques
Great interpersonal/customer service skills.
Availability to work on weekends, Holidays and overtime in order to service customers
Knowledge/Skills/Abilities: 
To be successful in this position, the individual performing the duties must successfully demonstrate the following competencies:
• Building Customer Loyalty
• Managing Work
• Adaptability
• Building Trust
• Follow-up
• Communication
• Demonstrate Defensive Driving techniques
No more than two convictions in the past two year period for traffic violations. No more than one of these may be a serious as defined by DOT (e.g., leaving scene of an accident, reckless driving, homicide/assault, eluding police, at fault offense, refusing a breathalyzer test, committing a felony with a vehicle) violation or result of an accident - company or private vehicle; No DUI convictions within past three years, regardless of type of vehicle operated; no driver's license suspension within past three years (insurance and overweight tickets are excluded); and no termination by previous employer for failure to comply with safety regulations or for accident involvement.
Physical Requirements:
This work requires the following physical activities: climbing, bending, stooping, kneeling, twisting, reaching, sitting, standing, walking, and lifting up to 50 lbs. of material on a consistent basis, 100 lbs. on an occasional basis and repetitive motions. The work is performed primarily outdoors.
Physical Requirements: Must be able to pass DOT physical.  Must be able to work in extreme weather conditions.  Must be able to perform the following physical activities for described length of time:

OCCASIONALLY: 1% - 33%
FREQUENTLY: 34% - 66%
CONTINUOUSLY: 67% - 100%

JOB REQUIRES WORKER TO:
1. STAND Frequently 
2. WALK  Frequently 
3. DRIVE Frequently 
4. SIT Frequently

JOB REQUIRES WORKER TO LIFT:
1. 1-10 lbs. (Sedentary) Occasionally
2. 10-20 lbs. (Light) Frequently 
3. 25-50 lbs. (Medium) Frequently 
4. 50-100 lbs. (Heavy) Occasionally
5. Over 100 lbs. (Very Heavy) Occasionally

JOB REQUIRES WORKER TO CARRY:
1. 1-10 lbs. (Sedentary) Occasionally
2. 10-20 lbs. (Light)          Occasionally
3. 20-50 lbs. (Medium) Occasionally
4. 50-100 lbs. (Heavy) Occasionally
5. Over 100 lbs. (Very Heavy) Never

JOB REQUIRES WORKER TO:
1. Push/pull Frequently – e.g.: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift
2. Climb/balance Frequently – e.g.: In/Out Truck/Trailer (2 vertical steps) to cab.  On/Off ramp to ground level and side door steps and Platform of trailer.  Stairs, truck and delivery ramps.
3. Stoop/squat Occasionally
4. Kneel/bend Occasionally
5. Bend Frequently
6. Reach above shoulder Occasionally
7. Grasp objects Frequently – e.g.: Hand truck, boxes, cartons
Continuously - Steering wheel
 8. Manipulate objects  Frequently – e.g.: Boxes, dolly, metal truck ramp, hand truck, paper work, truck gate, straps
Continuously – e.g.: truck gear shift
9. Twisting   Frequently

Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law.  The expected base rate for this role is between $20.61 and $25.50.

This role will also receive overtime compensation.​

​Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here:

Join the US Foods Team!

Ready to build a career with a company that's leading the foodservice industry?

Schedule: Monday - Saturday, w/two days off (must work Saturdays)

Pay: Our Non-CDL Delivery Drivers make $25.50/hour.

Benefits Begin Day 1! Medical, dental, vision, 401K, life insurance, strong safety culture, and much more!  Excellent local leadership.

ESSENTIAL DUTIES AND RESPONSIBILITIES  (Each item should account for 10% or more)
An individual must be able to satisfactorily perform each essential duty listed below.  The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Essential Job Functions:
• Lift up to 50 lbs. on a frequent basis and up to 100 lbs. on an occasional basis.
• Load and unload the vehicle for multi-stop deliveries.
• Transport deliveries by driving assigned vehicles.
• Use hand truck to move product from the delivery vehicle into the customer location including going up and down stairs with product as necessary.
• Accurately record delivery information including operating a hand scanner and all company required documentation.
• Responsible for the proper documentation and disposition for any return product.
• Communicate delivery- customer issues to proper authority (i.e., Customer Service, Territory Manager, Transportation Supervisor, etc.).
• Deliver product to each of the designated stops following the stop sequence provided for the day.
• Unload product safely and stage product in the space(s) designated by customer.
• Check invoice for complete delivery. Process paperwork and damaged merchandise if any.
• Collect payments if necessary.
• Monitor refrigeration system on the delivery vehicle on a consistent basis for safety; follow all safe food handling procedures.
• Perform pre-trip and post-trip inspections such as monitoring fluid levels, tires, windshield wash and replenishing fuel.
• Other duties as assigned.
***EOE Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Protected Veteran/Disability Status***

SUPERVISION
None

RELATIONSHIPS
Internal:   Transportation associates, Maintenance associates and other internal contacts
External: Customers

QUALIFICATIONS

Education/Training: 
High school diploma or general education degree (GED) preferred
Related Experience/Requirements:
Must be 21 years of age or older.
Valid U.S. driver’s license issued by the state of legal residence with proper endorsements if required. No more than two convictions in the past two-year period for traffic violations, no DUI convictions in the past three years, no driver’s license suspensions in the past three years. Must be able to pass DOT physical.
No commercial or professional driving experience required. One year of multi-stop delivery experience is preferred or six months local delivery experience and/or foodservice industry experience.
Hand cart delivery experience preferred.
Able to read, write and communicate in English as it relates to the job and safety regulations.
Must have basic math skills (add, subtract, multiply, divide).
Must pass pre-employment testing (including items such a Background Check)
Have knowledge of area and/or map reading abilities.
Use safe lifting and loading techniques
Great interpersonal/customer service skills.
Availability to work on weekends, Holidays and overtime in order to service customers
Knowledge/Skills/Abilities: 
To be successful in this position, the individual performing the duties must successfully demonstrate the following competencies:
• Building Customer Loyalty
• Managing Work
• Adaptability
• Building Trust
• Follow-up
• Communication
• Demonstrate Defensive Driving techniques
No more than two convictions in the past two year period for traffic violations. No more than one of these may be a serious as defined by DOT (e.g., leaving scene of an accident, reckless driving, homicide/assault, eluding police, at fault offense, refusing a breathalyzer test, committing a felony with a vehicle) violation or result of an accident - company or private vehicle; No DUI convictions within past three years, regardless of type of vehicle operated; no driver's license suspension within past three years (insurance and overweight tickets are excluded); and no termination by previous employer for failure to comply with safety regulations or for accident involvement.
Physical Requirements:
This work requires the following physical activities: climbing, bending, stooping, kneeling, twisting, reaching, sitting, standing, walking, and lifting up to 50 lbs. of material on a consistent basis, 100 lbs. on an occasional basis and repetitive motions. The work is performed primarily outdoors.
Physical Requirements: Must be able to pass DOT physical.  Must be able to work in extreme weather conditions.  Must be able to perform the following physical activities for described length of time:

OCCASIONALLY: 1% - 33%
FREQUENTLY: 34% - 66%
CONTINUOUSLY: 67% - 100%

JOB REQUIRES WORKER TO:
1. STAND Frequently 
2. WALK  Frequently 
3. DRIVE Frequently 
4. SIT Frequently

JOB REQUIRES WORKER TO LIFT:
1. 1-10 lbs. (Sedentary) Occasionally
2. 10-20 lbs. (Light) Frequently 
3. 25-50 lbs. (Medium) Frequently 
4. 50-100 lbs. (Heavy) Occasionally
5. Over 100 lbs. (Very Heavy) Occasionally

JOB REQUIRES WORKER TO CARRY:
1. 1-10 lbs. (Sedentary) Occasionally
2. 10-20 lbs. (Light)          Occasionally
3. 20-50 lbs. (Medium) Occasionally
4. 50-100 lbs. (Heavy) Occasionally
5. Over 100 lbs. (Very Heavy) Never

JOB REQUIRES WORKER TO:
1. Push/pull Frequently – e.g.: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift
2. Climb/balance Frequently – e.g.: In/Out Truck/Trailer (2 vertical steps) to cab.  On/Off ramp to ground level and side door steps and Platform of trailer.  Stairs, truck and delivery ramps.
3. Stoop/squat Occasionally
4. Kneel/bend Occasionally
5. Bend Frequently
6. Reach above shoulder Occasionally
7. Grasp objects Frequently – e.g.: Hand truck, boxes, cartons
Continuously - Steering wheel
 8. Manipulate objects  Frequently – e.g.: Boxes, dolly, metal truck ramp, hand truck, paper work, truck gate, straps
Continuously – e.g.: truck gear shift
9. Twisting   Frequently

Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law.  The expected base rate for this role is between $20.61 and $25.50.

This role will also receive overtime compensation.​

​Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here:

Introduction

Restaurant HVAC Technician

***EPA Type 2 or Universal certification REQUIRED***

Skol Construction Concepts an arm of Checkmate Pizza, is one of the largest Domino’s franchises in the United States, has over 80 locations in the Southeast market. We are seeking an experienced HVAC Technician with 3 years of experience to join our team. This position requires technical skills to evaluate, troubleshoot, repair, and install equipment. In addition, the Maintenance Technician must possess an awareness and understanding of how to work safely while performing facilities and equipment repairs as well as preventative maintenance on Commercial  HVAC systems, makeline tables and walk-in coolers.

Shift – Full Time, Must be able to work flexible shifts including nights, some weekends, and rotating “On-Call” duty with other techs

Compensation/Benefits - $35-40/hour, Health Insurance, Dental, Paid time off

Job Description

Troubleshoot, Diagnose, and Repair restaurant level equipment:

· Strong practical knowledge of commercial HVAC, refrigeration, electrical, plumbing systems

· Service and repair 5–10-ton HVAC units, makeline tables and walk-in coolers.

· Handle thermostats and remote equipment controllers

· Service and repair walk in and reach in coolers

· Monitor equipment to detect malfunctions for electrical and mechanical faults

· Use appropriate hand & power tools, refrigerant gauges, multi meters, ohmmeters, and other related equipment in the performance of PM and repairs.

· Work from elevated areas such as ladders, platforms, roof tops

· Keep equipment warranty/repair records and asset tags up to date

· Mild plumbing work (mop sinks, drains)

· Mild electrical work (switches, outlets, conduit)

· Manage Corrigo, Service Channel, Service Titan W/O, equipment tagging

 Qualifications

· High School diploma or GED preferred

· Minimum 3 year’s experience with HVAC/R

· Basic level computer skills for word processing and spreadsheets

· EPA Type 2 or Universal certification, Contractor’s license preferred

· RETA / NATE certification preferred

 Other Requirements

· Must pass a background check and random drug screenings

· Must have a clean driving record – will undergo regular MVR reports

· Must have a smart device to communicate and access Service Channel

· Carry cell phone for “on call” rotating schedule

· Maintain an accurate inventory of supplies and tools

· Complete work orders promptly, prioritizing critical tasks

· Work without direct supervision on daily assigned tasks

· Must be able to read and interpret blueprints and electrical schematics

· Must be able to perform under extreme stress when there is an equipment failure

· Must communicate clearly and effectively via both verbal and written

· Critical thinker with good problem-solving abilities and strong attention to details

· Must be able to work in temperatures ranging from 30 degrees and up to 100 degrees for long periods of time

· Must be comfortable working in narrow aisles and passageways including confined spaces for extended periods of time

· Must be able to remain calm, professional, and maintain self-control during challenging events

· Ability to lift 50 pounds or more on a frequent basis

· The ability to stand or kneel for multiple hours at a time

· Good manual dexterity

The Maintenance Technician position is responsible for independently performing both basic/routine and complex/non-routine maintenance, repair and performance of production equipment in accordance with Safety Standards, SOP's and Statistical Process Control (SPC) requirements. The Maintenance Technician may be required to help, assist, instruct and train others on the mechanical, electrical and hydraulic repair and maintenance of equipment.

Independently modify, repair, install, maintain, improve and troubleshoots various types of injection press & axillary equipment

Diagnose mechanical problems and provide quick, innovative solutions for mechanical equipment breakdowns by applying proven skills in the principles of mechanics, fitting, retrofitting, plumbing, basic welding, metal work, troubleshooting and analytical problem solving

Diagnose electrical faults and failures and trouble shoot solutions by performing control system analysis and interpretation of PLC ladder logic diagrams to solve problems

Fix and maintain plant equipment including air compressors, chillers, water towers, and fire systems

Support the timely and effective line handover between shifts, including the completion of proper documentation and accurate briefing on progress/issues within the Maintenance team and Production Supervisors

Independently conduct PM activities according to PM program schedules and standards

Train others to handle equipment changeover, set up, take down

Recommend and implement solutions to both routine and unique equipment problems, including fabricating or modification of alternate components as needed

Respond to equipment problems in a timely and customer oriented manner

Solve problems independently as per standard guidelines and procedures, as well as developing new procedures as needed to address non-routine and complex issues

Maintain high standards of organization and general housekeeping

Integrate all plant, quality, safety, and security policies and guidelines into all day to day activities on the job

Follow all proper maintenance, sanitation and Environmental Health and Safety protocols at all times

Demonstrated track record of excellent attendance (i.e. no attendance write-ups)

All other work as assigned by management

Independently modify, repair, install, maintain, improve and troubleshoot mechanical, hydraulic and electrical issues for various types of press and axillary equipment in rubber manufacturing

Diagnose mechanical problems and provide quick, innovative solutions for mechanical equipment breakdowns by applying proven skills in the advanced principles of mechanics, fitting, plumbing, basic welding, metal work, troubleshooting and analytical problem solving

Support the timely and effective line handover between shifts, including the completion of proper documentation and accurate briefing on progress/issues within the Maintenance Team and Production Supervisors

Solve problems independently

Work cooperatively with co-workers and supervisors as a Quality Focused, Service Oriented Team Player

Trade school certification or accreditation

5 years' experience maintaining electrical and mechanical systems and equipment

PLC experience with AB PLC-5 or Seimens

Trained in hydraulics or 5 years' relevant experience

Trained in pneumatics of 5 years' relevant experience

Skilled in lockout tag out

Written skills for document completion and use

Able to acquire new skills as per training provided

Finding information

Must be able to read blueprints and schematics and technical sketches

Literate in Microsoft Office Suite

Job consists of many repetitive tasks

Must be able to stand for extended periods

Working on elevated surfaces such as ladders, platforms, hoists as required

Must be able to walk, stoop, kneel, crouch, and otherwise maneuver the plant

Uses hands and fingers to handle and feel

Must be able to communicate effectively

Listens to machines to troubleshoot problems

Must have strong visual abilities at close, distance, and peripheral with ability to sharp focus and perceive depth

Handling and lifting loads up to 50lbs

Environment contains loud noises

Strong attention to detail

AirBoss Flexible Products is an equal opportunity employer. We provide employment opportunities without regard to race, gender, color, disability, national origin, age, religion, sexual orientation, veteran status, or any other status protected by law. AirBoss Flexible Products participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Maintenance Coordinator

A leading global organization in the food processing and packaging industry is seeking a Maintenance Coordinator to support plant operations and improve equipment reliability. This role plays an important part in coordinating maintenance activities, troubleshooting production equipment, and supporting automation and process improvements to maximize equipment uptime.

Key Responsibilities

• Coordinate preventive maintenance activities and address corrective maintenance needs during production shifts

• Troubleshoot failures involving production equipment, mechanical systems, PLCs, and drives

• Support a zero-downtime production strategy through loss analysis, fault diagnosis, and equipment repairs

• Participate in automation and new equipment projects focused on safety, performance, and lifecycle management

• Facilitate Single Event Analysis (SEA) with maintenance technicians to identify root causes and prevent repeat issues

• Maintain and update machine documentation within internal systems

• Collaborate with the inventory team to improve the e-maintenance system, including parts tracking and usage

• Generate purchase requests for maintenance components and operational supplies

• Ensure clear communication between maintenance teams across shifts

Required Qualifications

• At least 3+ years of experience in a maintenance department as an A-level Maintenance Technician or similar role

• 1–2 years of PLC programming and troubleshooting experience

• Strong knowledge of mechanical systems, controls, and automation

• Experience performing preventive and corrective maintenance in a manufacturing environment

• Bachelor’s degree, technical degree, certification preferred or equivalent hands-on experience

• Technical education or certification in Controls or Automation (preferred)

• Forklift operation experience

• Millwright trade experience or apprenticeship

• Mechanical or Electrical certifications or licenses

Benefits:

• Salary $75K

• Competitive benefits package

• PTO

• 401K

If you are interested in learning more about this opportunity, apply now or reach out directly to discuss the role.

We are seeking a skilled HVAC/R Technician to join our growing team. In this role, you will diagnose, service, and repair a wide range of commercial refrigeration and commercial HVAC equipment, including walk-in coolers/freezers, reach-ins, ice machines, and rooftop units. Youll work directly with restaurants, convenience stores, and commercial kitchens throughout Central Kentucky, including top national brands such as Buffalo Wild Wings, Chipotle, Pizza Hut, Arbys, Freddys, and many others.

Why Join Our Team?

Were growing fast and looking for motivated, skilled HVAC/R technicians who want more than just a job. At our company, you get top pay, real benefits, long-term stability, and a team that respects your craft.

Location in Lexington, KY and a new branch in Ashland, KY.

What We Offer

• Top Pay: Up to $40/hr depending on experience
• Take-Home Company Van no more putting miles on your personal vehicle
• Profit Sharing share in the companys success
• Full Benefits Package:
• Health, dental, vision, & life insurance
• Supplemental insurance options
• 401(k) with 4% Company Match
• Paid Time Off & Holidays
• Professional Development & Training Opportunities

What Youll Do

Youll service commercial refrigeration and HVAC equipment across Central Kentucky, with a focus on foodservice and retail environments. Daily responsibilities include:

• Installing, maintaining, and repairing walk-in coolers/freezers, reach-ins, prep tables, ice machines, and commercial HVAC systems
• Troubleshooting and diagnosing refrigeration issues including temperature control problems, defrost failures, leaks, compressor issues, and electrical faults
• Replacing major components such as compressors, evaporator/condenser fan motors, TXVs, contactors, relays, and motor starters
• Performing scheduled preventive maintenance on walk-ins, ice machines, and rooftop HVAC units to maximize uptime and efficiency
• Responding quickly to emergency cooling or ice-production outages for restaurants, c-stores, and commercial kitchens
• Working independently in the field while collaborating with team members and office staff as needed
• Communicating clearly and professionally with customers to explain findings and recommended repairs
• Following all safety standards, EPA guidelines, and local mechanical codes

What Were Looking For

Required

• Valid drivers license
• EPA certification
• 1+ year of hands-on HVAC experience
• Technical training in HVAC, refrigeration, electrical, or mechanical systems
• Strong communication and customer service skills

Preferred

• High school diploma or equivalent
• Kentucky Journeyman or Master HVAC License
• Additional certifications (controls, mechanical systems, etc.)

About the Role

We need technicians who take pride in their work. People who show up ready to solve problems, treat customers right, and represent the company with professionalism. If thats you, youll fit right in.

Visit our website to learn more: to Apply?

If youre a dedicated technician ready to join a team that values quality, service, and professional growth, wed love to hear from you.

We are an Equal Opportunity Employer and a Drug-Free Workplace.

Job Type: Full-time

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off

Required qualifications:

• Legally authorized to work in the United States
• 18 years or older

Preferred qualifications:

• Available to work: on call

JOB DESCRIPTION

Manufacturing Engineer

Department: Manufacturing

Reports To: Sr. Manufacturing Manager

Location: Naples, FL

Classification: Full-Time, Exempt

Position Summary

Skeletal Dynamics is a precision contract manufacturing facility specializing in Class II orthopedic implants (ISO 13485 certified, titanium precision machining). We are looking for a Manufacturing Engineer to own investigations, drive process improvements, and lead continuous improvement initiatives across the facility. This role works alongside our existing Quality Engineer (who owns document control and QMS maintenance) and focuses on the analytical, problem-solving, and process optimization side of the operation.

This is a hands-on engineering role in a fast-paced, technology-forward environment. You will be expected to leverage AI tools (Claude, ChatGPT, etc.), data visualization platforms (Power BI), and modern analytics to accelerate your work and multiply your impact. We are a small, high-trust team — you will have real ownership from day one.

Core Responsibilities

Investigations & Root Cause Analysis

• Lead NCR (nonconformance report) investigations from identification through disposition, including containment, root cause analysis, and corrective action.
• Own the CAPA (corrective and preventive action) process — identify systemic issues, develop sustainable corrective actions, verify effectiveness, and close out with full documentation.
• Conduct structured root cause analysis using 5-Why, Ishikawa, fault tree analysis, and other methodologies appropriate to the failure mode.
• Interface with customers on quality escapes, investigations, and corrective action responses.

Process Improvement & Continuous Improvement

• Identify, prioritize, and execute process improvement projects across machining, inspection, and post-processing operations
• Apply lean manufacturing principles and continuous improvement methodologies to reduce waste, improve cycle times, and increase first-pass yield.
• Develop and maintain statistical process control (SPC) programs; monitor Cpk/Ppk and drive process capability improvements.
• Support process validation activities (IQ/OQ/PQ) for new equipment, tooling, and process changes.
• Evaluate and recommend fixture, tooling, and workholding improvements to improve quality and throughput.

Automation & Capital Improvement Projects

• Evaluate, justify, and lead implementation of automation projects including robotic machine tending, automated inspection, and lights-out manufacturing capability.
• Develop business cases and ROI analyses for capital equipment and automation investments.
• Own project management for automation deployments — vendor evaluation, installation, validation, and production handoff.
• Collaborate with equipment vendors and integrators to define requirements, review designs, and manage timelines.
• Identify opportunities to reduce manual handling, improve repeatability, and increase throughput through technology adoption.

Supplier Quality Support

• Support incoming material inspections and supplier nonconformance resolution.
• Assist with supplier qualification, audits, and performance monitoring as needed.
• Collaborate with supply chain on supplier corrective action requests (SCARs).

Data Analysis & Reporting

• Build and maintain Power BI dashboards to track quality metrics, NCR trends, CAPA status, scrap rates, and process capability.
• Use AI tools (Claude, etc.) to accelerate document drafting, data analysis, investigation summaries, and reporting workflows.
• Present data-driven improvement recommendations to leadership with clear ROI justification.

Qualifications

Required

• Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, Biomedical Engineering, or related discipline.
• 2–3 years of engineering experience in a manufacturing environment, preferably medical device or aerospace.
• Working knowledge of ISO 13485, FDA 21 CFR 820, or equivalent regulated quality management systems.
• Demonstrated experience with NCR/CAPA investigation and root cause analysis methodologies.
• Proficiency with data visualization tools (Power BI preferred) and Microsoft Office Suite.
• Comfort with AI-assisted workflows — experience using LLMs (Claude, ChatGPT) and a willingness to push the boundaries of how AI tools can be applied in a manufacturing/quality context.
• Strong written and verbal communication skills; ability to write clear, audit-ready documentation.

Preferred

• Experience in CNC machining or precision manufacturing environments.
• Familiarity with GD&T, CMM inspection, and metrology fundamentals.
• Exposure to lean manufacturing, Six Sigma, or structured CI methodologies (certification not required).
• Experience with ERP/MES/QMS platforms (e.g., Business Central, 1Factory, Greenlight Guru, MachineMetrics, or similar).
• Exposure to industrial automation, robotics, or machine tending systems (collaborative robots, automated loading/unloading, vision systems).
• SPC/statistical analysis experience (Minitab, JMP, or equivalent).

What We Offer

• A high-trust, low-bureaucracy environment where your work has direct, visible impact on the business.
• Exposure to cutting-edge manufacturing technology and AI-driven workflows — this is not a traditional shop floor.
• A facility built 100% digital from day one — fully integrated ERP, QMS, MES, and machine monitoring systems.
• Ownership and autonomy from day one — we hire smart people and get out of their way.
• Competitive compensation, benefits, and growth opportunity in a rapidly evolving organization.

Skeletal Dynamics is an equal opportunity employer. We consider all qualified applicants without regard to race, color, religion, sex, national origin, disability, veteran status, or any other protected characteristic.

SUMMARY

As a Mechanic (Class B), this position is responsible for repairing and maintaining company-owned equipment. The Mechanic is accountable for diagnosing issues and making necessary adjustments, repairs, or overhauls on various heavy machinery used in heavy civil, railroad, and marine construction.

JOB DUTIES AND RESPONSIBILITIES

• Plan and schedule regular maintenance for industrial machines and equipment. Maintain accurate equipment service records.
• Conduct planned maintenance by examining parts for damage or excessive use, repairing and replacing damaged or worn parts, cleaning, lubricating, assembling, and testing equipment to ensure operational efficiency. May install batteries and windows on specific equipment.
• Diagnose and examine faults or malfunctions in equipment to determine repairs using engine diagnostic equipment such as computerized tests and calibration devices.
• Order materials and supplies needed for repair and maintenance of equipment.
• Test mechanical equipment after repair or assembly to ensure proper performance and compliance with the manufacturer’s specifications, which may include the assembly of gear systems, aligning frames and gears on heavy equipment, and/or fitting the proper bearings for mobile mechanical, hydraulic, and pneumatic equipment.
• Adjust and maintain industrial machinery using control and regulating devices.
• Perform general facility maintenance and clean-up tasks.
• Perform other related duties as assigned.

REQUIRED QUALIFICATIONS

• Education: Must possess a Transportation Worker Identification Credential (TWIC) or be willing/eligible to obtain one upon hire. Must have a valid driver’s license.
• Experience: Five (5) years of experience maintaining and repairing heavy equipment, hydraulic cranes, and friction cranes.
• Knowledge/Skills/Abilities (KSA): Must possess strong written and verbal communication skills in English to effectively present information and respond to questions from managers, clients, and customers. Must possess the ability to read and understand operating manuals, blueprints, and technical drawings. Proficient in the use of computer diagnostic equipment and software. Must provide tools required to work on cranes and heavy equipment.

PREFERRED QUALIFICATIONS

• Experience: Seven (7) years of experience maintaining and repairing heavy equipment, hydraulic cranes, and friction cranes.
• Knowledge/Skills/Abilities (KSA): General knowledge and skills in marine operations, such as pile driving, welding, crane operations, barges, etc. General knowledge and understanding of basic construction terms and concepts.

WORKING CONDITIONS

• The individual must be able to perform the essential functions of the job with or without reasonable workplace accommodation.
• The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes a hard hat, safety glasses, life vest, respirators, ear plugs, steel-toed shoes, personal floatation devices (PFD), and/or other protective equipment.
• The individual frequently works near moving mechanical parts and must be able to adapt to temperature changes, outdoor conditions, and prolonged exposure to dusty, wet, or humid conditions, loud noises, and vibration.
• The individual may be required to work long hours and/or weekends. Additionally, some out-of-town or overnight travel may be required.
• The individual may occasionally be required to sit in a vehicle for up to 8 hours.
• The individual may be required to walk, step, climb, or otherwise move from one location on the job site to another, which may be of varying heights and access parameters.
• The individual may occasionally be required to stand, stoop, bend, crouch, kneel, climb, or sit for long periods.
• The individual may be required to work in confined spaces, climb vertical ladders of a height of 6 ft. or greater, and/or elevated heights.
• The individual may be required to lift objects with a minimum of 10 lbs. and a maximum single-person lift of 50 lbs. This could result in frequent lifting or carrying depending on project needs.
• The individual must meet specific vision abilities, such as close vision and color vision.
• The individual may be required to perform repetitive movements by feet, shoulders, arms, wrists, hands, and back in the performance of work.

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

The Company expects and requires all employees to observe and fulfill all safety responsibilities as outlined in workplace safety training and actively work toward maintaining a safe workplace. Employees are authorized and obligated to stop work on any task or series of tasks whenever an unsafe condition or situation is anticipated or is observed as well as bring problems to the attention of the immediate supervisor, HSE Manager, or HR Manager. Failure to do so can result in disciplinary action, up to and including termination of employment. Regular attendance and punctuality are required of all employees. Employment at Russell Marine, LLC is on an “at-will” basis. There is no contract of employment between Russell Marine, LLC and any one or all of its employees unless explicitly stated elsewhere. Employment security cannot be guaranteed for or by any employee. No Manager, Supervisor, or employee of the Company has any authority to enter into an agreement for employment for any specified period of time or to make an agreement for employment other than at-will. Only the Owner or President has the authority to modify the at-will relationship, and then only in writing specifically addressed to the employee on this issue and signed by that Russell Marine, LLC Executive.

Russell Marine, LLC is proud to be an equal opportunity employer and does not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other protected status. If you require special assistance or accommodation while seeking employment with Russell Marine, LLC, please contact Human Resources at