Engineering Structures Jobs in Ma

On-site Burlington, Massachusetts

Ongoing contract on a W-2

We are looking for a Field Engineer that ideally has previous linear water rehabilitation experience i.e. sewers. This will be an onsite role for a sewer rehabilitation project for a utility client in Boston. They will be providing Owner's rep services and be reviewing drawings, RFI's, etc. to provide technical support out in the field to the main contractors out in the field. This person will coordinate back with the design engineer office to determine if changes need to be made.

Provide subcontractors with information and direction, as outlined within contract specifications, to allow the work to proceed as scheduled. Authority to interpret technical requirements and provide solutions in conjunction with discipline Project Department Engineer and Discipline Superintendent, to provide drawings and data, and to direct work as assigned and consistent with Company's contractual commitments. May perform subcontract administration of discipline specific or assigned procurements. Interprets and administers fundamental commercial issues. Position may transition to assistant superintendent or startup engineering role. May perform in an EPC environment where Company is either solely responsible or in a Joint Venture/Consortium with others. Provides technical direction/interpretation of design drawings and specification requirements, as well as general guidance to subcontractors on overall design. May perform fundamental design checks and re-design in the field without supervision. Provides commercial direction, interpretation of subcontracts, and administers discipline specific or assigned contract requirements in coordination with Field. Subcontract Administrator or Procurement Manager. Reviews, maintains records, and responds to Contractor Information. Requests (CIRs) as assigned. Monitors assigned subcontractor(s) for compliance with subcontract technical requirements. Monitors discipline construction activities for compliance with the CPM schedule. Prepares and issues all discipline extra work authorization requests (RFMPs/WAs) with the approval of the Project Field Manager Coordinates with Field. Subcontract Administrator as needed. Maintains a daily log for site record purposes. Completes quantity take-offs as required to support construction planning and invoice approval. Reviews all subcontractor progress payment requests for acceptance. Monitors technical service representative (supplier) daily logs and reviews/approves their timesheets. Compiles and maintains Conformed to Construction Records drawing and list markups as assigned. Directs site document control activities for design documents. Assists Field Quality Assurance Manager in performing inspections and verification of tests. Adheres to safety and quality standards as appropriate for level of duties and accountabilities. Supports continuous improvement efforts and the change management effects associated with the implementation of improvements. Provides commercial direction, interpretation of subcontracts, and administers discipline specific or assigned contract requirements in coordination with Field Subcontract Administrator or Procurement Manager. Reviews, maintains records, and responds to Contractor Information Requests (CIRs) as assigned. Acts in capacity of a "lead person" Does not have management responsibility for the people to whom they provide work direction except as assigned Directs other discipline engineers, general foreman, craft personnel, TA's, and vendor representatives.

Education: MUST have a BS in engineering. Preferrably Civil since it is dealing with underground construction (but not a deal-breaker)

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Paragonix Technologies markets organ transportation devices that safeguard organs during the journey between donor and recipient patients. Our devices incorporate clinically proven and medically trusted hypothermic preservation techniques in a novel suspension system to provide unprecedented physical and thermal protection. Our product portfolio spans cardiac, thoracic, and abdominal preservation devices to improve donor organ quality and extend donor organ transport time. Paragonix also markets transplant services and organ screeningto the transplant community.

Position Overview: The Design Quality Engineer will play a crucial role in ensuring the quality and compliance of Paragonix's medical device products throughout the design and development lifecycle. The successful candidate will collaborate closely with cross-functional teams, including R&D, manufacturing, regulatory affairs, and quality assurance, to drive excellence in design control processes.

Primary responsibilities/authority will include:

• 
  
• Design Control Compliance: Implement and maintain design control processes in accordance with applicable regulatory standards (e.g., ISO 13485, ISO 14971, FDA QSR, MDR) to ensure the development of safe and effective medical devices.
  
• Risk Management: Lead and contribute to risk management activities throughout the design process, including the identification, assessment, and mitigation of potential risks. Work closely with the R&D team to integrate risk management into the design process.
  
• Failure Analysis: Assist in Post-Market Surveillance (PMS) initiatives, including failure investigation, record review, and data trending.
  
• Quality Planning: Develop and execute quality plans for new product development projects, outlining quality objectives, deliverables, and verification/validation activities.
  
• Design Input and Output:
  
  • 
    
  • Review and approve design inputs to ensure they are clear, complete, and aligned with user needs and regulatory requirements.
    
  • Validate that design outputs meet the specified design input requirements.
    
  
  
  
• Change Control: Manage design changes by assessing their impact on product quality, ensuring proper documentation, and obtaining necessary approvals.
  
• Verification and Validation:
  
  • 
    
  • Develop and execute protocols for design verification and validation strategies and acceptance criteria.
    
  • Collaborate with testing teams to ensure thorough testing of product designs.
    
  
  
  
• Collaboration: Work closely with cross-functional teams, including R&D, manufacturing, regulatory affairs, and quality assurance, to facilitate effective communication and collaboration throughout the product development process.
  
• Regulatory Compliance: Stay abreast of relevant regulations and standards and ensure that product designs comply with applicable requirements. Support regulatory submissions as needed.
  
• Continuous Improvement: Identify opportunities for process improvements within the design control system and contribute to the development and implementation of best practices.
  

Required Qualifications:

• 
  
• Bachelor's degree in engineering or a related field; advanced degree preferred.
  
• Minimum of 1-3 years of experience in a quality engineering role in the medical device industry.
  
• In-depth knowledge of design control processes, risk management, and quality management systems (ISO 13485, ISO 14971, FDA QSR).
  
• Strong technical skills related to product quality including VOE translation to Design Specs, Human Factors, CTQ Cascades, Design Characterization, Verification / Validation, Test Method Validation, Process Validation, Inspection Techniques and Statistics.
  
• Strong understanding of regulatory requirements for medical devices (FDA, EU MDR, etc.).
  
• Excellent communication and interpersonal skills, with the ability to collaborate effectively across functions.
  
• DFSS or DMAIC Black Belt Certified, ASQ Certified Quality Engineer (CQE) or Certified Quality Auditor (CQA) certification is a plus.
  

Other Requirements:

• 
  
• Electrical and mechanical background strongly preferred.
  
• Experience creating and analyzing charts in Minitab, JMP, or equivalent software a plus.
  
• Knowledge of Six Sigma, Lean, SPC, ASQ and/or ISO process controls a plus.
  
• Computer proficiency in MS office (specifically Excel).
  
• Effective verbal and excellent technical writing skills.
  
• Excels at generating and maintaining organized and accurate records.
  
• Excellent oral and written communication skills in English.
  
• Able to travel domestically and internationally as required (

Experienced CNC Machinists wanted! Join a stable manufacturing company with 40+ years in business. We are looking for a skilled CNC Lathe Setup/Operator who can produce precision components and support our growing production team.

• Set up and operate CNC lathes for production runs
• Read and interpret blueprints and technical drawings
• Inspect parts using calipers, micrometers, and precision measuring tools
• Perform machine adjustments and basic troubleshooting
• Work with engineering on CNC programs (Mastercam / CAM software)
• Maintain quality standards through in-process inspections
• Keep machines and work areas clean, safe, and organized

• 510 years CNC machining experience
• Strong experience with lathe setup and tooling
• Experience with multi-axis / multi-spindle machines (Mazak, Puma, Miyano preferred)
• Knowledge of GD&T and blueprint reading
• Strong mechanical aptitude and problem-solving skills
• High School Diploma or equivalent
  

• Established company 40+ years in business
• Competitive pay
• Comprehensive benefits package
• Stable full-time work
• Opportunity to grow with an experienced manufacturing team

PI14ac14f66

Job Summary:

The 2nd Shift Production Supervisor leads a multi-department team of CNC Operators and Set-Up Operators, in a high mix / low volume aerospace component manufacturing environment. This role is expected to balance expertise in set-up and operation of CNC machining for precision tolerance components, along with strong interpersonal skills to motivate the team to work toward common goals and objectives. Key responsibilities include managing the day-to-day priorities for multiple departments, cross-training staff on best practices to meet set-up and production run-times, optimizing processes through the elimination of waste, and leading lean continuous improvement initiatives. As a working supervisor, this role is expected to run production jobs and provide the necessary supervisory management to a small 2nd shift team.

This role is 100% in office at our plant in East Hartford, CT.

At HORST we offer a variety of benefits including but not limited to:

• Competitive PTO Package
• Paid Company Holidays
• 401K Match Program
• Medical, Dental, Vision Benefits
• Tuition Reimbursement/Assistance Program

Essential Job Duties:

• Conduct security, quality and EH&S audits to ensure the safety of employees on the second shift, and compliance with company and customer policies.
• Coordinate time-off requests, with attention to skills matrix, to ensure adequate staffing level across all disciplines of machine centers to meet production needs.
• Motivate team to meet daily, weekly and monthly goals and objectives. Identify waste and non-value-added tasks that interfere with objectives.
• Routinely measure, monitor, and publish the performance of all individuals on the team. Compare results against department standards. Complete periodic performance evaluations, and correct any issues in real time as needed, up to and including, disciplinary actions if needed.
• Host a daily GEMBA walk and serve as the primary conduit for all communications between operators and cross functional teams. Attend production meetings, and quality clinic/MRB meetings as needed. Collaborate with engineering, purchasing, production and sales teams to drive open issues to rapid closure.
• Partner with production control to stage daily and weekly priorities. Ensure jobs are completed on time, and productivity is sustained. Expedite jobs as necessary.
• Set-up and operate CNC machines according to operation sheet instructions. Provide technical support for team.
• Maintain ERP data integrity ensuring job punches match traveler package. Report any discrepancies that could impact job quantity or delivery.
• Develop and author standard work for the operation of production equipment. Coach and train teammates in best practices, enforcing safety, departmental and QMS polices, with the goal of process improvement, reduction in set up time, faster productivity rates, and improved quality.

Experience & Skills:

• Minimum of 10 years progressive career in the manufacturing of precision machined components in a regulated industry such as aerospace or medical. Previous experience in a high mix, low volume shop with an emphasis on lean manufacturing preferred.
• Working knowledge of ISO/AS quality standards, basic OSHA/EHS safety regulations, and a commitment to adherence of company policies.
• Advanced or expert machining skills in 1 or more disciplines. Swiss lathe, multi-axis turning, turning, milling, or grinding. Must be able to independently set-up and operate CNC equipment and provide the necessary training to others on shift.
• Experience leading and managing a small team toward common goals. An effective communicator that can build rapport with a diverse team. Previous team lead experience preferred.
• A willingness to take accountability for self and team, driving and inheriting the collective results of a department or team.
• High degree of urgency to drive operations at full speed. Keen sense of attention to detail to understand how to work with pace, not haste, avoiding careless mistakes.
• Strong understanding of operational metrics such as first past yield, efficiency, WIP aging, on-time-delivery, job cost, scrap rate, etc.
• Strong computer skills especially related to navigating ERP systems, job clocking systems, CAD/CAM software, and Microsoft products such Outlooks, Excel, PowerPoint, etc. Previous experience with EPICOR a plus.

Physical Demands:

Legend

N (Not applicable)

Activity is not applicable to this position

O (Occasionally)

Position requires this activity up to 33% of the time (0-2.5 hours/day)

F (Frequently)

Position requires this activity up to 66% of the time (2.5-5.5 hours/day)

C (Constantly)

Position requires this activity more than 66% of the time (5.5+ hours/day)

Lift/Carry 10-30lbs

F

Stand

F

Walk

F

Manually manipulate

F

Squat or kneel

O

Bend

O

Reach above shoulder

O

PIcdef49d468

Job Title: Manufacturing Engineer – BOM & Configuration Management

Location: Chelmsford MA

Duration: Full time

Pay rate : $60000 – $65000 / annum

Manufacturing Engineer – BOM / Configuration Management

We are seeking a Manufacturing Engineer to support product documentation and configuration management for electronics manufacturing operations. This role will focus on creating and maintaining multi-level Bills of Materials (BOMs) and manufacturing documentation for PCBA, cable assemblies, and electro-mechanical products.

Key Responsibilities

• Create and maintain single-level and multi-level BOMs in ERP/MRP/PLM systems
• Translate engineering drawings and schematics into structured manufacturing documentation
• Process Engineering Change Orders (ECOs) and Engineering Change Notices (ECNs)
• Develop assembly documentation, work instructions, and manufacturing process flows
• Support new product introduction (NPI) and design transfer to manufacturing
• Collaborate with engineering, supply chain, quality, and production teams
• Maintain product configuration control and documentation accuracy

Qualifications

• Bachelor’s degree in Mechanical, Manufacturing, or Industrial Engineering (or equivalent experience)
• 3–7+ years of manufacturing engineering or product documentation experience
• Experience with BOM management, ECO/ECN processes, and ERP/PLM systems
• Background in electronics manufacturing (PCBA, SMT, electro-mechanical assembly) preferred
• Strong organizational, documentation, and communication skills

This is an onsite role supporting manufacturing operations and product documentation within a collaborative engineering environment.

Dexian is a leading provider of staffing, IT, and workforce solutions with over 12,000 employees and 70 locations worldwide. As one of the largest IT staffing companies and the 2nd largest minority-owned staffing company in the U.S., Dexian was formed in 2023 through the merger of DISYS and Signature Consultants. Combining the best elements of its core companies, Dexian's platform connects talent, technology, and organizations to produce game-changing results that help everyone achieve their ambitions and goals. Dexian's brands include Dexian DISYS, Dexian Signature Consultants, Dexian Government Solutions, Dexian Talent Development and Dexian IT Solutions. Visit to learn more. Dexian is an Equal Opportunity Employer that recruits and hires qualified candidates without regard to race, religion, sex, sexual orientation, gender identity, age, national origin, ancestry, citizenship, disability, or veteran status.

What We Do:

SMK Services, Inc. (SMK) is a Construction Management and Engineering services consultancy based in Belmont, Massachusetts. Our clients include public agencies, professional engineering firms, general contractors, and subcontractors. We provide services in Project Management, Construction Build Strategy, Scheduling, Engineering Support, Construction Estimating, Claims Analysis and Field Services.

With a growing client base and an expanding range of services, SMK is seeking a Construction Project Manager to join our team in the Greater Boston Area.

Company Culture:

SMK is an exciting, collaborative, supportive environment where we take pride in the work we do and celebrate our collective success. We cultivate a strong sense of community, one where colleagues’ voices are valued, growth is encouraged, and leadership remains open and accessible. As our firm continues to expand, the successful candidate will help shape and strengthen SMK’s culture alongside us.

Opportunities for Growth:

SMK is a growing business that is continually evolving, creating meaningful opportunities for employees to grow alongside the company and advance their careers. We actively encourage and support colleagues in developing their careers in areas of the business and industry that align with their interests and passions. SMK offers ongoing professional development opportunities to broaden employee knowledge and ensure our team stays current with the latest industry practices and innovations.

Why SMK

SMK is intentionally built as a close-knit, highly collaborative team where people genuinely know, trust, and support one another. Our size allows for real relationships, open communication, and a workplace where individual contributions are visible and valued.

We pride ourselves on creating a warm, engaging, and supportive environment, one where experienced professionals can do their best work without bureaucracy or being lost in the crowd. Leadership is hands-on and accessible, collaboration is the norm, and we care deeply about both the quality of our work and the well-being of our team.

At SMK, you’re not just filling a role, you’re joining a group of professionals who respect each other’s expertise, enjoy working together, and are committed to growing the firm thoughtfully and sustainably.

The Role:

SMK is seeking an experienced Construction Project Manager to coordinate and supervise a diverse portfolio of contracts, primarily in the infrastructure field (highway/bridge or transit). The ideal candidate should have experience in Civil and Structural construction projects as well as having experience in general construction methodologies, disciplines and procedures. 

Ideal Candidate

The ideal candidate is an experienced construction professional with a strong background in civil and structural infrastructure projects who excels in a client-facing, consulting-oriented environment. They possess the ability to clearly visualize construction sequencing and phasing and to lead the development of thoughtful, practical build strategies that balance feasibility, risk, schedule, and cost.

They are comfortable managing project-level internal teams that may include estimators, schedulers, and assistant project managers, providing direction and coordination to ensure project objectives are executed efficiently and consistently. This individual can bring together work from different team members into clear, consistent deliverables.

The ideal candidate brings strong written communication skills and is experienced in independently authoring professional reports, technical memoranda, and narratives. They are equally adept at reviewing and quality-controlling the work of others, ensuring analytical rigor, clarity, and consistency before deliverables are issued to clients.

Highly organized and analytical, this individual can manage multiple projects and priorities while maintaining attention to detail. They communicate clearly and confidently, exercise sound professional judgment, and are comfortable representing SMK in discussions related to constructability, scheduling, cost, and risk.

They value collaboration, mentorship, and continuous improvement and are motivated by contributing to a close-knit, high-performing team. Adaptable and proactive, the ideal candidate is willing to step beyond their core responsibilities when needed to support colleagues, strengthen client relationships, and help grow the firm.

Key Responsibilities:

In this role, you will be responsible for a variety of tasks, including:

• Conducting site visits to enforce project requirements while recording project progress and assisting in the resolution of field issues.
• Preparing and reviewing submittals, RFIs and other official project correspondence.
• Attending and leading project issues, progress and change order negotiation meetings.
• Performing reviews of design documents for: (1) Compliance with project requirements; (2) Interdisciplinary coordination; (3) Analysis of conceptual feasibility and review for fatal flaws.
• Reviewing design plans and specifications to: (1) Propose means and methods build strategies with phasing and sequencing in report format; (2) Evaluate constructability, risk, delay, and cost overrun mitigation.
• Ability to develop and manage the development of: (1) Construction cost estimates; (2) Claim reviews and performing change order analysis; (3) Schedules using Primavera P6 and phasing methodology for construction activities; (4) Reviews on contractor schedule updates, time impact analyses and recovery efforts while proposing solutions to scheduling issues.
• Performing and presenting Risk Assessments and Value Engineering studies.
• Monitoring and tracking SMK project budgets.
• Assisting in the development and preparation of scope and fee proposals to clients.
• Supervising and mentoring entry level project management staff.

Key Attributes:

• Strong, intuitive understanding of construction principles, sequencing, and contractor means and methods.
• Ability to read, understand and interpret design drawings, specifications, and schedules.
• Exceptional written, verbal, and organizational skills.
• Demonstrated proficiency in independently authoring clear, well-structured analytical reports and narratives.
• Ability to think critically and think of solutions to complex problems in a dynamic environment.
• Sound judgment and confidence when engaging directly with clients.
• Ability to manage priorities and handle multiple tasks at once.
• Willingness to assist with other non-project management tasks as needed.

Qualifications:

• A Bachelor’s degree in Construction Management, Engineering, or a related field.
• A minimum of 7+ years of Project Management related experience in the civil heavy construction/transportation field.
• 5+ years experience with concrete placement, earth support systems, deep foundation construction, marine construction, structural steel erection, structural demolition, highway construction, drainage system construction, Interstate Highway traffic controls, environmental protection systems and field survey/layout.
• Required proficiency in Bluebeam and Microsoft Office 365.
• Experience with HCSS, Bid2Win, and/or Estimating Link
• Experience with Primavera P6 or Microsoft Project
• Valid driver’s license and access to a personal vehicle.
• Authorization to work in the United States.

Additional Employment Information:

• Full-time salaried position.
• Annual starting salary of $120,000 to $160,000, dependent on experience.
• Paid Time Off.
• Eleven days of holiday pay.
• Generous retirement plan contribution.
• Paid office parking.
• Cell phone allowance.
• Medical and dental insurance.
• Hybrid work structure with remote and in-office days based on workload, collaboration needs, client meetings, training, and experience level.
• Primary work location is office-based, with occasional site visits throughout New England.

Note to Applicants

This role requires significant experience in Civil (Heavy) Construction field, with Transportation experience preferred. We encourage applicants who closely match the qualifications outlined above to apply. Candidates whose experience does not align with the requirements will not be considered at this time.

Equal Employment Opportunity Statement:

SMK provides equal employment opportunity in employment and advancement for all persons regardless of race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran and persons with a disability, at all employment levels, including the executive level. We do not and will not discriminate against any applicant or employee regardless of race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran and persons with a disability for any position for which the applicant or employee is qualified. Such affirmative action shall apply to all employment practices, including, but not limited to hiring, upgrading, demotion or transfer, recruitment, recruitment advertising, layoff or termination, rates of pay or other forms of compensation, and selection for training, including apprenticeship and on-the-job training.

Granite delivers advanced communications and technology solutions to businesses and government agencies throughout the United States and Canada. We provide exceptional customized service with an emphasis on reliability and outstanding customer support and our customers include over 85 of the Fortune 100. Granite has over $1.85 Billion in revenue with more than 2,100 employees and is headquartered in Quincy, MA. Our mission is to be the leading telecommunications company wherever we offer services as well as provide an environment where the value of each individual is recognized and where each person has the opportunity to further their growth and achieve success.

Granite has been recognized by the Boston Business Journal as one of the "Healthiest Companies" in Massachusetts for the past 15 consecutive years.

Our offices have onsite fully equipped state of the art gyms for employees at zero cost.

Granite's philanthropy is unparalleled with over $300 million in donations to organizations such as Dana Farber Cancer Institute, The ALS Foundation and the Alzheimer's Association to name a few.

We have been consistently rated a "Fastest Growing Company" by Inc. Magazine.

Granite was named to Forbes List of America's Best Employers 2022, 2023 and 2024.

Granite was recently named One of Forbes Best Employers for Diversity.

Our company's insurance package includes health, dental, vision, life, disability coverage, 401K retirement with company match, childcare benefits, tuition assistance, and more.

If you are a highly motivated individual who wants to grow your career with a fast paced and progressive company, Granite has countless opportunities for you.

EOE/M/F/Vets/Disabled

General Summary of Position:

• 
  
• Prospecting, cold calling and selling our structured cabling products and services to national companies.
  
• Building and maintaining a sales funnel.
  
• Effectively communicate and demonstrate the features and values of our business.
  
• Identify prospect needs and develop action plans and proposals; Deliver in person and online presentations.
  
• Close the deal and maintain positive client relationships.
  
• Create additional revenue opportunities.
  
• Achieve and exceed sales goals.
  
• Develop a clear understanding of Granite's cabling products and services: Managed Services, Cabling Projects, Wi-Fi projects and Rollouts.
  
• You will be selling infrastructure engineering and network installations for voice, data, video, security, and wireless solutions.
  

Duties and Responsibilities:

• 
  
• Prospecting, cold calling and selling our structured cabling products and services to national companies.
  
• Building and maintaining a sales funnel.
  
• Effectively communicate and demonstrate the features and values of our business.
  
• Identify prospect needs and develop action plans and proposals; Deliver in person and online presentations.
  
• Close the deal and maintain positive client relationships.
  
• Create additional revenue opportunities.
  
• Achieve and exceed sales goals.
  
• Develop a clear understanding of Granite's cabling products and services: Managed Services, Cabling Projects, Wi-Fi projects and Rollouts.
  
• You will be selling infrastructure engineering and network installations for voice, data, video, security, and wireless solutions.
  
• Bachelor's Degree Preferred
  

#LI-GC1

Senior Software Engineer – Deployment & Reliability (Digital Pathology / Medical Imaging)

A fast-growing technology company operating in the digital pathology and medical imaging space is seeking a Senior Software Engineer to support the deployment, configuration, and long-term reliability of advanced imaging and AI-driven software systems.

This role sits at the intersection of software deployment, infrastructure engineering, and site reliability, ensuring complex software platforms are successfully installed, integrated with customer IT environments, and maintained at high levels of performance and stability.

You will work closely with engineering, customer support, and monitoring teams to ensure a smooth transition from system deployment to ongoing operational support while contributing to improvements that make deployments more scalable and reliable over time.

Key Responsibilities

Deployment & Configuration

• Lead end-to-end deployments of imaging, AI, and data management software systems at customer environments
• Configure and integrate servers, clusters, and storage systems within hospital or laboratory IT infrastructures
• Work with networking, authentication, storage, and security configurations to ensure successful installations
• Collaborate with field engineering teams during system installation and commissioning
• Develop standardized deployment playbooks, documentation, and validation checklists

System Reliability & Upgrades

• Manage software version rollouts, upgrades, and patching across deployed customer environments
• Work with monitoring and observability teams to track system performance and health
• Troubleshoot complex issues across multi-component systems including imaging software, AI inference pipelines, and storage layers
• Improve automation around upgrades, rollbacks, and maintenance processes

Engineering Collaboration & Continuous Improvement

• Identify recurring deployment or performance challenges and work with R&D teams to design long-term solutions
• Provide structured feedback from field deployments to improve product architecture and deployment workflows
• Validate new deployment tools, frameworks, and configuration approaches prior to wider rollout
• Contribute to improving the scalability and resilience of the overall platform

Customer IT & Cross-Functional Collaboration

• Serve as a technical liaison with customer IT teams regarding networking, infrastructure, security, and data access
• Ensure deployments comply with institutional IT policies and healthcare regulatory requirements
• Collaborate closely with support and monitoring teams to align escalation processes and root cause investigations
• Participate in post-deployment reviews to improve operational processes and reliability

Documentation & Knowledge Sharing

• Maintain detailed installation and configuration documentation
• Develop deployment guides, troubleshooting documentation, and internal knowledge resources
• Support and mentor field teams on standardized deployment and configuration practices

Requirements

• Bachelor’s or Master’s degree in Computer Science, Computer Engineering, or related discipline
• 5+ years of experience in software deployment, DevOps, infrastructure engineering, or systems engineering
• Strong Linux (Ubuntu) administration and scripting skills
• Experience with containerization and orchestration technologies (Docker, Kubernetes)
• Experience with database technologies such as PostgreSQL or MongoDB
• Familiarity with web service configuration (Nginx or Apache)
• Solid understanding of networking concepts including VPNs, firewalls, and authentication systems
• Ability to troubleshoot complex distributed systems across software, infrastructure, and data layers
• Strong communication and collaboration skills when working with cross-functional teams and customer IT stakeholders

Preferred Experience

• Exposure to medical imaging systems, digital pathology, or healthcare technology environments
• Familiarity with DICOM or PACS systems
• Experience deploying or supporting AI/ML models in production environments
• Experience with observability and monitoring tools (Prometheus, Grafana, ELK)
• Knowledge of regulated environments and healthcare compliance frameworks (HIPAA, GDPR, IVDR)
• Experience supporting hardware and software integrated systems

Why This Role

This position offers the opportunity to work on advanced digital pathology and imaging technologies that support clinical diagnostics and research globally. The role combines hands-on technical deployment with the chance to influence how complex systems are designed, automated, and scaled across a growing global customer base.

What We Do:

SMK Services, Inc. (SMK) is a Construction Management and Engineering services consultancy based in Belmont, Massachusetts. Our clients include public agencies, professional engineering firms, general contractors, and subcontractors. We provide services in Project Management, Construction Build Strategy, Scheduling, Engineering Support, Construction Estimating, Claims Analysis and Field Services.

With a growing client base and an expanding range of services, SMK is seeking a Senior Construction Scheduler to join our team in the Greater Boston Area.

Company Culture:

SMK is an exciting, collaborative, supportive environment where we take pride in the work we do and celebrate our collective success. We cultivate a strong sense of community, one where colleagues’ voices are valued, growth is encouraged, and leadership remains open and accessible. As our firm continues to expand, the successful candidate will help shape and strengthen SMK’s culture alongside us.

Opportunities for Growth:

SMK is a growing business that is continually evolving, creating meaningful opportunities for employees to grow alongside the company and advance their careers. We actively encourage and support colleagues in developing their careers in areas of the business and industry that align with their interests and passions. SMK offers ongoing professional development opportunities to broaden employee knowledge and ensure our team stays current with the latest industry practices and innovations.

Why SMK

SMK is intentionally built as a close-knit, highly collaborative team where people genuinely know, trust, and support one another. Our size allows for real relationships, open communication, and a workplace where individual contributions are visible and valued.

We pride ourselves on creating a warm, engaging, and supportive environment, one where experienced professionals can do their best work without bureaucracy or being lost in the crowd. Leadership is hands-on and accessible, collaboration is the norm, and we care deeply about both the quality of our work and the well-being of our team.

At SMK, you’re not just filling a role, you’re joining a group of professionals who respect each other’s expertise, enjoy working together, and are committed to growing the firm thoughtfully and sustainably.

The Role:

SMK is seeking a seasoned Senior Construction Scheduler to support and lead scheduling efforts for complex infrastructure and heavy civil design and construction projects, which may include transportation, rail, facilities, multi-modal, and large highway programs. The successful candidate will bring advanced Critical Path Method (CPM) scheduling expertise, deep hands-on experience with Primavera P6, and a proven ability to develop schedules and analyze, manage, and communicate schedule risks, constraints, and construction sequencing.

Ideal Candidate

The ideal candidate is someone who enjoys being trusted to take ownership of their work and is comfortable operating without heavy oversight. They are naturally curious, ask the right questions early, and think several steps ahead when developing or reviewing schedules.

They have the confidence to challenge assumptions, respectfully and constructively, and are comfortable explaining schedule logic, risks, and impacts to both technical and non-technical audiences. Rather than simply updating schedules, they focus on understanding why activities move, where risk is accumulating, and how decisions affect the overall program.

The ideal candidate values clarity, accuracy, and professionalism in written communication and takes pride in producing narratives and analyses that stand up to scrutiny. They are organized, pragmatic, and calm under pressure, with the judgment to prioritize what truly matters when multiple deadlines compete.

Finally, the ideal candidate is someone who appreciates working in a small, close-knit team. They are generous with their knowledge, supportive of colleagues, and motivated by contributing to a respectful, collaborative environment where people genuinely enjoy working together.

Key Responsibilities:

In this role, you will be responsible for a variety of tasks, including:

• Develop, maintain, and manage cost and resource-loaded CPM schedules using Primavera P6 and other scheduling tools.
• Prepare, update, and maintain design and Contract Time Determination schedules in accordance with contract requirements, client procedures, and industry best practices.
• Review designer and contractor schedule submittals, including baseline and re-baseline schedules, monthly updates, Time Impact Analyses, acceleration schedules, and recovery plans, for contractual and technical compliance.
• Perform independent time-impact analyses and review contractor requests for time extensions and delay-related submissions.
• Analyze schedule progress, critical paths, float consumption, and forecasted completion; identify at-risk activities and recommend mitigation strategies.
• Conduct site visits to active heavy civil construction projects to verify progress, document conditions, and perform or review schedule updates.
• Perform “what-if” schedule scenarios to assess impacts to milestones and overall project delivery.
• Prepare clear, well-documented technical reports, narratives, charts, and graphics summarizing schedule analyses and findings.
• Provide quality review of schedule-related reports prepared by others.
• Attend and participate in client progress and scheduling meetings; confidently present schedule updates, analyses, and recommendations.
• Coordinate closely with project managers, designers, contractors, and internal teams to resolve schedule issues and support effective project delivery.
• Support the maintenance and updating of SMK’s company-wide project and program schedules.

Key Attributes:

• Exceptional written, verbal, and organizational skills.
• Demonstrated proficiency in independently authoring clear, well-structured analytical reports and narratives.
• Ability to work independently while also collaborating effectively within a team.
• Strong, intuitive understanding of construction principles, sequencing, and contractor means and methods.
• Professional judgment and confidence to step into client-facing discussions.
• Flexibility with work location within Eastern Massachusetts.
• Willingness to step outside the core role to assist with periodic Project Management tasks as needed.

Qualifications:

A minimum of 6+ years of active civil (heavy) construction scheduling experience (transportation experience preferred), including:

• Developing and updating Contract Time Determination schedules with narrative reports.
• Reviewing and analyzing baseline schedules and monthly progress update schedules developed by others.

Required proficiency in:

• Primavera P6
• Microsoft Excel, Word, and Outlook

Experience with:

• Microsoft PowerPoint
• Bluebeam

Valid driver’s license and access to a personal vehicle

Authorization to work in the United States

Additional Employment Information:

• Full-time salaried position.
• Annual starting salary of $130,000 to $175,000, dependent on experience.
• Paid Time Off.
• Eleven days of holiday pay.
• Generous retirement plan contribution.
• Paid office parking.
• Cell phone allowance.
• Medical and dental insurance.
• Hybrid work structure with remote and in-office days based on workload, collaboration needs, client meetings, training, and experience level.
• Primary work location is office-based, with occasional site visits throughout New England.

Note to Applicants

This is a senior-level role requiring significant experience in Civil (Heavy) Construction scheduling, with Transportation experience preferred. We encourage applicants who closely match the qualifications outlined above to apply. Candidates whose experience does not align with the requirements will not be considered at this time.

Equal Employment Opportunity Statement:

SMK provides equal employment opportunity in employment and advancement for all persons regardless of race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran and persons with a disability, at all employment levels, including the executive level. We do not and will not discriminate against any applicant or employee regardless of race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran and persons with a disability for any position for which the applicant or employee is qualified. Such affirmative action shall apply to all employment practices, including, but not limited to hiring, upgrading, demotion or transfer, recruitment, recruitment advertising, layoff or termination, rates of pay or other forms of compensation, and selection for training, including apprenticeship and on-the-job training.

• Design and implement automated workflows and AI agents for supply chain tasks.
• Conduct iterative testing and user acceptance testing with supply chain teams.
• Configure workflow logic, decision trees, automation sequences, and integration points for AI functionality.
• Develop hybrid solutions integrating analytics dashboards with AI workflows for process automation.
• Document workflow configurations, prompt patterns, and decisions in detail for non-technical user maintenance.

• Expertise in prompt engineering and AI platform management
• Proficiency in no-code/low-code workflow automation tools
• Deep understanding of AI agent training, context windows, model limitations, and hallucination mitigation.
• Basic technical understanding (APIs, data structures, integrations)