Engineering Structures Jobs Salary Jobs in Compton, CA

• Leading the Naval network warfare missions in developing tactics and procedures to realize tactical, strategic and business advantages afloat and ashore
• Driving interoperability with joint, allied and coalition partners
• Building professional excellence through education, training and certification and milestone qualifications
• Optimizing organizational effectiveness through cutting-edge technologies, knowledge management techniques and a culture of innovation
• Helping to develop and deploy information systems, command and control and space systems
• Serving as a key part of the Information Dominance Corps in its mission to gain a deep understanding of the inner workings of adversaries
• Overseeing the work of Information Systems Technicians - Enlisted Sailors (no degree required) who serve as specialists in information technology

• Serving as part of Battle Group staffs on ships at sea
• Working in C4I/Space/Surveillance on shore tours
• Serving on major Navy and joint staffs
• Serving in command of key communication and surveillance facilities around the globe

• Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
• Completing Joint Professional Military Education (JPME) at one of the various service colleges

Pilot—CBP Air Interdiction Agent

NEW RECRUITMENT AND RETENTION INCENTIVES!

Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.

If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demand–APPLY TODAY!

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW!

Duty Locations

Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:

Southeast Region: Homestead, FL and CAMB: Aguadilla, PR

Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX

NASOC UAS locations: Sierra Vista, AZ; San Angelo, TX

Duties and Responsibilities

As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:

• Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
• Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
• Collecting, refining, and analyzing strategic and tactical intelligence.
• Supporting search and rescue and humanitarian efforts.

Salary and Benefits

Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).

Recruitment Incentive: New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)

Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.

This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).

• GS-11, 1st year annual pay - $106,588
• GS-12, 2nd year annual pay - $127,754
• GS-13, 3rd year annual pay - $151,918

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).

• GS-11, 1st year annual pay - $115,115
• GS-12, 2nd year annual pay - $137,974
• GS-13, 3rd year annual pay - $164,071

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).

• GS-11, 1st year annual pay - $127,906
• GS-12, 2nd year annual pay - $153,305
• GS-13, 3rd year annual pay - $182,302

Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.

• RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)

• RI: Retention Incentive (25% for Key West, FL)

RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)

Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications

Experience: You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:

• Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
• Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
• Developing strategies and coordinating aircraft and ground assets.
• Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
• Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.

Hiring Minimums:

Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:

• Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
• Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
• Helicopter Rated: Rotorcraft Helicopter with instrument rating.
• Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).

Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.

250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.

FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.

Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)

UAS Flight Hours: Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the "Total flight time" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the "day before an individual's 37th birthday" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.

NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.

Age Waiver: Creditable law enforcement officer service - Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v. Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training: This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply

There Are Three Ways to Apply to Become an Air Interdiction Agent:

• Fill out the Air Interdiction Agent applicant checklist and email it to a recruiter at along with a copy of your resume; OR

• Apply on USAJOBS ; OR

• Apply on Airline Apps.

Stay Updated – Opt into CBP's talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. You'll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

Job Title: Office Assistant (Contract)

Location: Santa Fe Springs, CA

Pay Rate: Up to $24/hour

Assignment Length: Contract through June 30

Schedule: Monday–Thursday 7:00 AM – 4:00 PM / Friday 6:00 AM – 2:30 PM (30-minute lunch)

Position Overview

We are seeking a detail-oriented Project Coordinator to support project administration and operational coordination within a fast-paced environment. This role will assist with project documentation, communication, and tracking while working closely with cross-functional teams including engineering, production, and warehouse operations.

Key Responsibilities

• Monitor and manage a high-volume shared inbox, responding to requests and routing inquiries to the appropriate teams.
• Communicate with internal teams through Microsoft Teams messaging to coordinate project updates and requests.
• Prepare and compile project documentation and packets, ensuring materials are complete and distributed accurately.
• Perform data entry and job code tracking, maintaining accurate records and project status updates.
• Utilize Microsoft Excel for sorting, filtering, and basic tracking of project data.
• Coordinate with engineering, production, and warehouse staff to help move projects through different stages.
• Maintain organized and accurate documentation, ensuring proper version control of project files.
• Provide general administrative and project support as needed.

Preferred Qualifications

• Previous experience supporting technical, engineering, or manufacturing teams.
• Ability to review or interpret engineering drawings is strongly preferred.
• Familiarity with NetSuite or similar ERP systems is a plus.
• Strong attention to detail, especially when handling project numbers and job codes.
• Comfortable working in an operational or warehouse-adjacent environment.

Equal Opportunity

Employer/Veterans/Disabled

To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

• The California Fair Chance Act

• Los Angeles City Fair Chance Ordinance

• Los Angeles County Fair Chance Ordinance for Employers

• San Francisco Fair Chance Ordinance

Position Summary:

Who we are: AGSE is a recognized leader in the design and manufacture of aerospace ground support equipment, serving the world’s top aerospace organizations. We are in the midst of a cultural transformation, moving from tribal knowledge and manual reactive processes to a data-driven, standardized, and continuously improving operation. This is your chance to join a team that is committed to real change, not just “checking the box” on Lean.

What You’ll Do: You will be an active partner in driving our transformation—building systems, not just projects. Your focus will be on embedding continuous improvement as a mindset at every level, not just as a set of tools. Your day-to-day will combine process analysis, hands-on problem solving, cross-functional coaching, and project execution, with a direct line to senior leadership.

You won’t just analyze; you’ll implement, teach, and sustain.

Responsibilities: Essential Duties:

· Lead Improvement Projects: Identify, plan, and execute high-impact Lean, Six Sigma, and digital transformation projects focused on operational bottlenecks (quality escapes, long prep times, inefficient assembly, etc.).

· Drive Standardization: Document tribal knowledge into robust SOPs and work instructions; pilot and roll out digital work instruction tools and visual management boards.

· Coach & Train: Deliver hands-on Lean/CI training for operators, leads, and supervisors, focusing on practical skills (problem solving, process mapping, visual management, mistake-proofing, etc.).

· Data-Driven Action: Design meaningful KPIs, collect and analyze shopfloor data (scrap, rework, cycle times, downtime, OTD, etc.), and implement root cause analysis and countermeasures.

· Champion Digital Tools: Work with AI, automation, and analytics tools (Power Automate, ERP integrations, Excel, Power BI) to move the factory toward a paperless, digitally enabled environment.

· Facilitate Change: Run kaizen events, lead daily/weekly Gemba walks, facilitate feedback loops, and support the development of a true continuous improvement culture.

· Collaborate Across Functions: Partner with Quality, Engineering, Production, and Supply Chain to drive cross-functional initiatives and standardize processes.

· Tackle Real Problems: Address recurring issues like final inspection escapes, part marking accuracy, FOD/scratches, material flow, and inefficiencies in manual-heavy processes.

· Measure and Report Savings: Continuous improvement impacts in terms of dollars saved, hours reduced, and risk mitigated; report out to leadership and stakeholders.

Work Location: Santa Fe Springs, CA. 100% Onsite work. No remote nor hybrid availability for this role.

Expertise: Knowledge & Skills:

· 3+ years of hands-on experience in a Lean/Continuous Improvement, manufacturing, or operations engineering role.

· Strong working knowledge of Lean Manufacturing (5S, Value Stream Mapping, SMED, Poka-Yoke, Visual Management), Six Sigma (DMAIC, root cause analysis), and process mapping.

· Track record of driving real improvements, measurable cost savings, cycle time reductions, quality improvements.

· Experience creating and implementing Standard Work, SOPs, and operator-level training.

· Familiarity or experience with digital tools for shop floor (Power BI, Excel, Power Automate, digital checklists, etc.).

· Excellent communication, coaching, and facilitation skills; able to work at all levels from shop floor to leadership.

· Highly self-motivated, able to work with minimal supervision, and thrives in a dynamic, hands-on environment.

· Certification in Lean, Six Sigma (Green/Black Belt), or equivalent experience is highly preferred.

Nice to Have

· Experience supporting or leading ERP transitions (Epicor, Global Shop, etc.).

· Exposure to AI, automation, or advanced manufacturing technologies.

· Background in aerospace, heavy fabrication, or complex assembly environments.

· Experience implementing digital work instruction systems or MES.

· Knowledge of ISO 9001/AS9100 QMS requirements.

Required:

· Bachelor’s degree in: Bachelor’s degree in Industrial, Manufacturing, Mechanical Engineering or related technical field.

· Manufacturing engineering experience a must

· Six Sigma Black Belt, Lean, Quality, or other related certification preferred.

· Onsite role. No hybrid nor remote work available for this role

· Ability to work non-standard schedule as needed.

Physical Demands:

While performing the duties of this job, the employee is regularly required to sit and talk or listen. The employee frequently is required to use hands to handle or feel and reach with hands and arms. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds.

Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.

• Noise Intensity: Moderate
• Occasionally: Office environment, Production/manufacturing environment, Warehouse environment

Pay Range: $90,000 - $120,000 plus a discretionary bonus.

While a Company bonus is not guaranteed, this position’s maximum bonus percentage range can be up to 10% of base salary.

Company bonuses are not guaranteed and are based on your performance, the department’s performance and/or the Company’s financial results.

AGSE is required by law in certain jurisdictions to include a pay scale in the job posting for this position. "Pay scale" means the salary or hourly range that AGSE reasonably expects to pay for this position; it is neither a promise nor a guarantee of the compensation that the successful candidate will receive. The pay scale for this position considers the wide range of factors that AGSE considers in making compensation decisions, including, without limitation: skill set, experience, and training, licensure and certifications, and other business and organizational needs. Please note that it is not typical for AGSE employees to be at or near the top of the pay scale for their role - especially as a new hire - and compensation decisions are dependent on the facts and circumstances of each case.

Job Type: Full-time

Pay: $90,000.00 - $120,000.00 per year

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Referral program
• Tuition reimbursement
• Vision insurance

Work Location: In person

About Castelion

Castelion is bringing a new approach to defense development and production: one that focuses on short, iterative design cycles, rapid testing in development, and modern commercial manufacturing strategies for production at scale. We’re designing, building, and testing next generation long range strike weapons systems to give America and its Allies a definitive edge and deter future conflicts.

Senior Manufacturing Engineer - Mechanisms/Test

Castelion is seeking an expert in the manufacture and design of complex mechanisms for our in-house hypersonic vehicle development. This role will work closely with design engineering and technician teams to build and execute on testing and validation efforts to keep pace with the research and development timetable of our products. You will be apart of a team responsible for serving as a critical node in implementing feedback from testing and validation efforts, streamlining designs and implementing manufacturing changes to quickly mature our products for flight testing and production. Desire for product and process ownership is a must in this role.

Responsibilities

• Work with component design engineering teams to determine the manufacturing and testing feasibility of products
• Operate as a standalone resource responsible for a family of mechanisms
• Architect, mature and develop testing and validation procedures for a wide array of complex mechanisms
• Generate concept proposals in alignment with R&D efforts to help attribute requirements gathering
• Down select solutions generated based on quantifiable vehicle attributes, system cost and weight
• Propose and defend solutions in engineering review meetings
• Develop and refine process documentation including build instructions, test and validation procedures, health and safety standards, and mBOMs
• Create, maintain, and communicate detailed production plans and schedules
• Work closely with supply chain to develop new and existing suppliers as needed
• Design, develop and implement production tooling and equipment
• Participate in design reviews to drive design for manufacturing (DFM)
• Oversee introduction and implementation of new products and manufacturing capabilities
• Analyze and resolve manufacturing issues and non-conformances
• Develop, mentor, and train peers and colleagues

Basic Qualifications

• Bachelor’s degree in mechanical, aerospace, or manufacturing engineering, or other technical degree.
• 5+ years of mechanisms manufacturing, testing and validation experience
• Experience with operations/product line management
• Demonstrated direct or indirect leadership
• Proficiency in CAD/CAM software (NX preferred)
• Experience in selection, procurement, and implementation/validation of manufacturing equipment

Preferred Qualifications

• Experience in mechanisms design, testing and validation from high volume production environments
• Experience developing comprehensive testing and validation procedures and the required documentation processes
• Experience in qualification and acceptance testing of complex aerospace mechanisms
• Working experience with capacity modeling, process mapping, Lean/Six Sigma and value stream mapping
• Experience in transitioning development processes to rate production

Additional Requirements

• Must be willing to work extended hours and/or weekends as needed
• Must be able to travel up to 10%
• All employees are granted long-term stock incentives as part of their employment as Castelion. All employees receive access to comprehensive medial, vision, and dental insurance, and the company offers three weeks of paid time off per year.

Leadership Qualities

Bias to Action and Creative Problem Solving. Desire and experience questioning assumptions in ways that lead to break through ideas that are ultimately implemented. Successfully bring in applicable processes/concepts/materials from other industries to achieve efficiency gains. Ability to personally resolve minor issues in development without requiring significant support.

High Commitment, High Initiative. A successful candidate will have a genuine passion for Castelion’s mission and consistently look for ways to contribute to the company’s technical goals and prevent hardware blockers. Ability to work in a fast paced, autonomously driven, and demanding atmosphere. Strong sense of accountability and integrity.

Clear Communicator. Proactively communicates blockers. Trusted in previous roles to be voice of company with regulators, suppliers, gate keepers and customers. Capable of tactfully managing relationships with stakeholders to achieve company-desired outcomes without compromising relationships. Emails, IMs and verbal interactions are logical, drive clarity, and detailed enough to eliminate ambiguity.

ITAR Requirements:

• To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Employment with Castelion is governed on the basis of competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Calgon Carbon | A Kuraray Company currently has an opportunity where you can be a part of our growing team as we provide our customers with outstanding products that make the air we breathe and the water we use safe for generations to come.  

Position: Senior Technical Sales Representative
Location: US – Remote West Coast

Excellent Benefits: Medical, dental, prescription & vision, HSA & retirement savings (401k) – Generous Company Match!
Perks: Incentives/bonus plans, competitive pay, paid time off (vacation starting at 3 weeks), tuition reimbursement, wellness programs, fun events, learning & development opportunities.  

Hours of work: Full-time position with hours Monday - Friday, typically 8:30 AM - 5:00 PM
Travel: 50%; air, automobile, and overnight travel to visit customer sites, and company meetings

Responsible for the sale of activated carbon, equipment and services as well as growing and maintaining current business relationships within the defined geographical and/or market specific territories. This position is responsible for municipal and/or industrial sales for various markets such as environmental, chemical, food, drinking water, wastewater, groundwater, and process applications, and requires selling/influencing decision makers in procurement, operations, management, consulting engineers, general contractors, etc. Typical territory revenue responsibility $12-$20 MM (not confined to this range).  This role has more autonomy for managing his/her territory than the TSR IV role.

Duties and Responsibilities (not limited to)
 

• Prepare and document all sales proposals and customer communications as required by the company and business unit directives. This will include the use of GCRM to record and share meaningful customer and market information, bid results, competitive pricing, and other relevant activities
• Update sales forecast on a regular basis
• Keep the manager informed of all activities, including business threats and opportunities, in the assigned customer and market territory
• Assist with Accounts Receivables as needed
• Expand and strengthen the assigned business portfolio by driving strategic growth initiatives and cultivating high-value relationships across target markets
• Identify and secure new opportunities through proactive engagement, market intelligence, and alignment with organizational objectives
• Deliver exceptional customer service by maintaining a deep understanding of client needs and industry trends
• Build trusted, multi-level relationships with key stakeholders across consulting engineering firms, utilities, and manufacturing companies, ensuring tailored solutions and long-term value through best-in-class business practices
• Conduct all activities with a strong commitment to health, safety, and environmental awareness
• Promote safe business practices through professional behavior and by supporting company policies and standards in interactions with customers, partners, and colleagues
• Attend and be involved with market specific conferences and organizations
• Influence/Drive the creation of marketing collateral through communication of market specific needs
• Coordinate and participate in webinars, seminars and/or Lunch and Learns, as needed, to educate customers, prospects, engineering firms, and other stakeholders
• Responsible for the achievement of geographical territory annual sales, profit, and other plan goals
• Conduct regular outbound sales calls to prospect, qualify, and nurture leads, ensuring a full and healthy sales pipeline
• Initiate follow-up calls with prospective and existing clients to build relationships, address needs and advance opportunities through the sales cycle
• Assigned to special projects or initiatives on an as-needed basis
• Organize and/or present relevant technical-based presentations to customers, engineering firms and other market influencers or stakeholders
• Execute market strategies to strengthen Calgon Carbon’s position versus the competition
• Conduct activities in accordance with the marketing plan and sales strategies for assigned customer and market responsibilities
• Actively participate in training activities
   

Qualifications

• A Bachelor's degree (B.A. or B.S.), or equivalent from four-year college or university is required
• An MBA is preferred
• 7-10 years of Technical Sales Experience is required
• Experience in chemical manufacturing/industrial sales is preferred

More about Calgon Carbon, A Kuraray Company 

We are a company of scientific innovators with over 205 patents. For over 75 years, we’ve been innovating solutions to the world’s emerging challenges. Since creating the first activated carbon products from bituminous coal in the 1940s, Calgon Carbon has been a pioneer in developing advanced products, systems and services for air and water purification. Calgon Carbon’s product portfolio now encompasses more than 700 direct market applications. 

Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,350 people and operates 20 manufacturing, reactivation, innovation and equipment fabrication facilities in the U.S., Asia, and in Europe, where Calgon Carbon is known as Chemviron. 

Calgon Carbon was acquired by Kuraray in March of 2018. With complementary products and services, the combined organization will continue to focus on providing the highest quality and most innovative activated carbon and filtration media products, equipment, and services to meet customer needs anywhere in the world. 

Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran

PI1e1f371f93ff-37344-39320496

ERP Manager (Microsoft Dynamics 365 Business Central)

Location: Torrance, CA (Hybrid work environment)

Employment Type: Full-time

Salary Range: $90,000 – $110,000 annually (commensurate with experience)

Work Authorization: Must be authorized to work in the U.S. without sponsorship.

Position Overview

We are seeking an experienced ERP Manager to lead ERP implementation initiatives while also supporting presales activities and business development efforts. This role combines project management, functional leadership, client-facing presales support, and strategic system planning. The ERP Manager will work closely with executive leadership, sales teams, offshore engineering teams, and clients to design ERP solutions that align with operational and financial objectives. This role also requires occasional travel to client sites to support implementation activities, user testing, and training.

Key Responsibilities

1. Project Leadership & Delivery

· Lead full-cycle ERP implementation projects from discovery to go-live and post-launch support

· Develop and manage project plans, budgets, and resource allocations

· Manage risks, scope, and client expectations

· Ensure on-time and on-budget project delivery

· Coordinate with offshore engineering teams to optimize task allocation and maintain development quality

2. Presales & Solution Consulting

· Participate in client discovery meetings and requirements workshops

· Provide solution design support during proposal development

· Prepare high-level solution architecture and implementation approaches

· Estimate project scope, timelines, and resource requirements

· Support RFP/RFI responses and client presentations

· Partner with Sales to help close ERP-related opportunities

3. Business & Functional Leadership

· Translate business requirements into functional ERP configurations

· Advise clients on best practices in Finance, Sales, Purchasing, and Inventory processes

· Identify opportunities for automation and operational efficiency

· Align ERP capabilities with financial reporting and management needs

4. Team & Executive review Management

· Supervise internal ERP consultants and coordinate with external vendors

· Work with global/HQ teams on cross-border ERP initiatives

· Collaborate with offshore engineers to ensure efficient delivery and consistent implementation quality

· Mentor junior consultants and build internal ERP capabilities

· Communicate effectively with executive leadership and department heads

5. Governance & Continuous Improvement

· Support user acceptance testing (UAT) and implementation readiness

· Provide client training and guidance to ensure successful system adoption

· Travel to client sites when needed to assist with testing, training, and implementation support

· Establish ERP governance and documentation standards

· Monitor system performance and recommend enhancements

· Drive adoption of Microsoft ecosystem tools (Power Platform, reporting tools, etc.)

Required Qualifications

· 5+ years of ERP implementation experience

· 2+ years of project leadership or PM experience

· Experience participating in presales or solution consulting activities

· Strong experience with Microsoft Dynamics 365 Business Central preferred

· Solid understanding of Finance, Accounting, Sales, Purchasing, and Inventory processes

· Experience preparing project estimates and implementation plans

· Experience collaborating with offshore or distributed engineering teams

· Willingness to travel to client sites for testing support and user training when needed

· Excellent client-facing communication skills

· Business-level Japanese proficiency (日常会話レベル以上)

· Must be authorized to work in the U.S. without sponsorship

· Must be available for hybrid work

Preferred Qualifications

· Experience in IT services or ERP consulting firms

· Experience supporting Japanese subsidiaries in the U.S.

· Familiarity with Microsoft Power Platform

· PMP certification or equivalent

· Experience in manufacturing or distribution environments

Number of Openings

DMF is looking for a recent Electrical Engineering graduate with a passion for electronics and circuit design to join our new product development team. In this role you will work on developing industry leading LED lighting and IOT products with exposure to everything from ideation to detailed circuit design, analysis, prototyping and validation. The candidate will be an integral part of a dynamic and growing engineering team with room to innovate, learn and grow rapidly.

This role is onsite in Carson, CA.

The salary range is $75,000 to $100,000 (based on skills/knowledge/experience).

Responsibilities:

• Support the Electrical Engineering team in the design and qualification of compact LED drivers incorporating switch mode power supplies and associated control and communication circuits.
• Execute hardware testing and report results for review.
• Perform detail circuit design, simulation and prototyping under the direction of a senior engineer.
• Troubleshoot field returns, identifying root cause of problem and potential design improvements.
• Work with a cross functional team consisting of Mechanical engineers, Firmware engineers, Industrial Designers, and Project Managers supporting the overall product development effort.
• Follow the company product development process, conduct design reviews and interface with other engineers and departments to ensure an efficient transfer from design to production.

Requirements:

• Passionate about solving problems, using technology, and building product.
• Ideally, 2 or more years of professional experience with exposure to circuit design or testing within the consumer or industrial electronics sector.
• Knowledgeable with the fundamentals of electronics, components, and circuit design
• Hands on experience with electronics through professional experience, personal projects or college assignments.
• Able to communicate in an effective and professional manner (written and oral).
• High level of maturity and organization with a healthy obsession to learn
• Experience with microcontrollers and firmware is a plus.

Responsibilities.

The Director of Manufacturing will lead the production, planning, quality inspection and inventory control teams and work with the test and engineering teams for successful LRIP (Low-Rate Initial Production) of our Subsurface Compressor Systems; perform cost reduction; improve productivity, ensure quality builds; and ensure deliveries are made on time.

Essential Duties and Responsibilities:

1. Lead and direct the manufacturing team to meet delivery commitments.
2. Develop and maintain the Master Production Schedule; identify risks and take mitigating actions to address them preemptively.
3. Ensure production builds meet delivery, design, quality and forecasted budget.
4. Drive the S&OP forecasting process based on sales outlook, fleet support and internal usage.
5. Maintain spare part requirements for the operating fleet including R&D. Drive the S&OP process through purchase approvals.
6. Institute plans to improve productivity, reduce build costs and execute high quality builds. Continue to implement KPIs for these and define and track performance metrics, including OTTR and forecast accuracy.
7. Initiate NCR and follow through to closure to correct and prevent re-occurrence of manufacturing issues.
8. Verify quality traceability in the production management systems per ISO 9001
9. Ensure build procedures are consistently followed and operators are trained.
10. Build hardware failure contingency plans for production work and field support to reduce delivery risk and lead times
11. Implement 5S, including a special focus on safety assessment and PPE.
12. Assist in dispositioning discrepant material and ensuring engineering intent is met in the manufacturing process.
13. Contribute to and comply with ISO9001.

Skills, Experience, Education, and Abilities:

• BS degree in a technical field (Manufacturing, Industrial or Mechanical Engineering preferred) or equivalent combination of education/experience.
• A minimum of 7 years progressive and related experience required.
• Demonstrated ability to support hands-on decision making, management, mentoring and development of technicians and engineers in a highly collaborative environment.
• Ability to read prints and familiar with interpretation of GD&T call outs.
• Strong understanding of geometric tolerancing per ASME Y14.5, dimensional stack-ups, inspection procedures and metrology equipment.
• Experience building turbomachinery, which includes high-speed rotating equipment, electric motors, compressors and oil management systems.
• Familiar with creating ERP system BOM’s & Routers; experience with Global Shop is a plus.
• Knowledge of standard manufacturing processes for complex, precision turbo machinery: casting, machining, milling, grinding, rotor balancing, mechanical and electrical assembly, inspection techniques, oil management systems (tubing, fittings, etc.) and pressurized assemblies.
• Experience with NPI of complex equipment.
• Kaizen, 5S, Six Sigma, Demand Flow Technology, Lean Manufacturing, ISO 9001 experience is a plus.
• Experience configuring assembly lines, in-process Kanban’s and visual work instructions is a plus.
• Good interpersonal and interfacing skills (i.e. communicating well with people across different departments both internally and externally)
• Additional computer skills: Microsoft Office Suite

Intangibles Sought:

• Able to exercise independent judgment and make decisions on technical issues.
• Ability to establish positive rapport with individuals at all levels of organization.
• Ability to motivate working team through leadership and “can do” attitude.
• Self-awareness; not afraid to ask for help or admit error.
• Willingness to engage in constructive debate.
• Ownership, initiative and accountability.
• Flexibility in range of responsibilities.

Supervisory Responsibilities:

Position will lead the manufacturing team. Position will be responsible for directing and coordinating activities of others to meet company objectives.

Physical Demands / Work Environment:

Time will be split between office and shop floor. Personal protective equipment, such as safety glasses, gloves, or masks may be required in some assembly areas. Some travel will be required as needed for vendor visits/qualifications.

Wire Harness Design Engineer

Location: Long Beach California and Centennial, Colorado

Rate: $40/hour to $75/hour; The salary may be negotiable based on experience, education, geographic location, and other factors.

Contract to Hire

RESPONSIBILITIES

• Creates 3D harness routes considering bend radius, separation, and maintainability and manage technical trade studies.
• Generate electrical interconnect diagrams and schematics by defining point-to-point connections for power, signals, and data links; understands grounding and shielding principles.
• Interface and coordinate between various team members including engineering, program management, production and quality Create 3D models of harness designs using SolidWorks software.
• Analyze harnesses with applicable quality and reliability standards.
• Develop test equipment for IR/DWV testing.
• Design and integrate harness routing within the spacecraft and test equipment.
• Support production and quality assurance to clear obstacles and ensure build meets design intent.
• Develop BOM’s and work within ERP system for production coordination.

QUALIFICATIONS

• Bachelor’s degree in mechanical, electrical or related engineering experience.
• 2+ years of professional experience with harnessing design and routing.
• Experience with SolidWorks, CATIA, NX or similar 3D CAD software..
• Experience with Model-Based Systems Engineering (MBSE) as it relates to harness design (e.g., use of tools such as Cameo).
• Demonstrated ability to work autonomously with little input on requirements or management oversight.
• Excellent written and verbal communication skills.
• Willing to travel 20% of the time.

PREFERRED SKILLS AND EXPERIENCE

• Experience with SolidWorks Electrical and Routing.
• Experience implementing designs compliant with IPC/WHMA-A-620A or NASA-STD-8739.4.

This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). All applicants must be United States citizens, lawful permanent residents of the United States, persons granted refugee or asylee status in the United States and any other status within the meaning of US Export Control laws. If you meet these requirements, we are happy to continue discussing this opportunity with you. If you do not meet these requirements, we will be glad to look for a different opportunity that does not contain this requirement

If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at

Equal Opportunity Employer/Veterans/Disabled

Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable.

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

· The California Fair Chance Act

· Los Angeles City Fair Chance Ordinance

· Los Angeles County Fair Chance Ordinance for Employers

· San Francisco Fair Chance Ordinance