Engineering Jobs in Compton, CA

As a Lead Electrical Engineer, the candidate must have experience with L band RF systems, able to work from customer requirements to derive additional requirements, define the architecture of a possible solution based on requirements, setup a requirements schema & link requirements to documents (systems/subsystem specification, hardware/RF architecture description document, etc.) and flow down applicable requirements to other groups (software, ASIC, & test) so that they can contribute to realize the end solution based on the proposed architecture.

The Lead EE will also oversee the development a qualification test plan that will ensure that the architecture and solution satisfy the customers’ requirements.

The Lead EE will also work with subject matter experts in the areas of GPS signal processing, anti-jam signal processing, other hardware design team members, control software, and government qualification standards.

As a Lead EE, the candidate is expected to understand each aspect of the technology used in the proposed solution.

The Lead EE also must work with the cost account manager, program management, and project management to develop the solution within the program’s budget and schedule.

Essential Functions: Requires comprehensive level knowledge of Electrical Engineering low frequency and high frequency (RF) Analog and Digital circuit design.

Experience with RF systems, ideally GPS receivers Able to contribute to providing innovative Electrical Engineering solutions consistent with business development plans.

Ability to develop circuit designs, requirements, design descriptions, verification plans/procedures, customer CDRLs to meet program schedules.

Ability to support cross functional teams for cross functional conflict resolution, Root Cause Analysis, blank page architecture developments and design Ability to contribute to algorithm development, analysis, implementation, system architecture, verification, and Test with emphasis on military GPS electronics.

Ability to contribute to execution of design, build, integration and test activities, problem resolution and verifying that the deliverable products meet all program and customer requirements.

Ability to provide project management reports as required, support senior level and customer reviews as necessary.

Ability to provide inputs and reviews of the engineering technical baseline as part of proposal efforts.

Ability to interface with the program’s leadership and other teams (SW, Systems, ME, and Test) on a frequent basis, conduct or participate in customer and/or program technical review presentations, and provide progress status updates on work products.

Ability to participate or lead in the product development process including design reviews.

5 to 10% Travel required.

Must have Secret Security Clearance or be able to obtain a US security clearance.

Qualifications: Required Education/Experience: Requires mastery level knowledge within a specific technical area or multiple job areas.

Viewed as an expert and/or resource within the field by peers in and outside the organization.

Bachelor’s Degree and a minimum of 9 years of prior relevant experience.

Graduate Degree and a minimum of 7 years of prior related experience.

In lieu of a degree, a minimum of 13 years of prior related experience.

Minimum of 5 years’ experience in ability to capture schematics design and PCBA Layout using modern EE CAD such as Altium or Mentor Graphics.

5 years’ experience with project management and product design team leadership guided by individual annual goals and objectives with minimal oversight or direction; working in a team environment as an individual contributor.

6 years’ strong experience with receiver, Antenna, or Radio design (i.e.

RF).

4 years’ experience with embedded Hardware design.

2 years’ experience with FPGA design with emphasis in digital signal processing (DSP) 4 years’ experience demonstrating strong verbal and written skills 7 Years experience with design tools such as MATLAB/Simulink, P-Spice, Agilent ADS (or AWR), Schematics Capturing/PCBA Layout tools such as Altium, and Ansys HFSS 2 Years’ experience with FPGA design tools such as Xilinx ISE, Xilinx EDK, and ModelSim Must have Secret Security Clearance or be able to obtain a US security clearance.

Preferred Additional Skills: Strong familiarity with GPS Module design and topology.

Advanced with High-speed Analog design methodologies.

Advanced in MS Office, design tools such as Simulink/MATLAB, P-Spice, Altium (Schematics Capturing & PCBA Layout), Agilent ADS (or AWR), and Ansys HFSS.

Familiar with FPGA design methodologies.

Proficient with DO-254 design.

In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is Min $127,500.00
- $ 236,500.00 Max.

The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio, and Vermont is $110,500.00 Min
- $205,500.00 Max.

This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location.

L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays.

The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

LI-KM1 L3Harris Technologies is proud to be an Equal Opportunity Employer.

L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.

All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.

L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance.

Security clearances may only be granted to U.S.

citizens.

In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer.

Please click here for the E-Verify Poster in English or Spanish .

For information regarding your Right To Work, please click here for English or Spanish .

Under general supervision, deburr, weld prep and/or clean titanium and aluminum components and sub-assemblies to support all core processes, such as machining, welding, and NDE.

Essential Responsibilities

• 
  
• Support the highest standards of safety and environmental practices.
  
• Deburr machined components for sharp edges.
  
• Hand blend machined and welded surfaces to drawing requirements.
  
• Hand abrade components to desired finish for weld.
  
• Clean components and assemblies per drawing and/or manufacturing work instructions.
  
• Make a continuous effort to improve operations, decrease turnaround times, streamline work processes, and work cooperatively.
  
• Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment.
  
• Check work after completion of each operation in job and/or completed job to ensure it is complete per drawing and/or manufacturing work instruction.
  

$23-$26 per hour

• High school diploma or General Education Degree (GED).
• Aerospace manufacturing experience preferred.

This position is currently accepting applications.

Apply Now

AppleOne is partnering with an industry leader in custom chemical formulation and manufacturing based in Santa Fe Springs, CA. This organization serves as a critical partner to various industries, delivering high-quality, precision-engineered chemical solutions. Known for a culture of safety and reliability, they provide a dynamic environment where team members are empowered to take full ownership of the customer experience.

We are seeking a Sales Support Specialist for a full-time, onsite role. This position serves as the vital link between customers, Account Managers, vendors, and internal production teams. You will ensure that orders move accurately and efficiently while maintaining high standards of quality and safety. This role is highly suitable for a detail-driven professional who thrives in a fast-paced, evolving atmosphere and is motivated by the direct impact their work has on business success.

• Industry: Chemical Manufacturing / Industrial Solutions
• Job Function: Sales Support / Order Management
• Employment Type: Direct Hire
• Pay Rate: $24.00 – $27.00 per hour (Based on experience and skills)
• Workplace Type: 100% Onsite (Santa Fe Springs, CA)

Core Responsibilities

• Customer Advocacy: Serve as the primary point of contact for customer and Account Manager needs regarding order status and logistics.
• Order Management: Manage the full lifecycle of customer orders within the ERP system, ensuring accuracy from initial entry through final completion.
• Data Integrity: Maintain highly accurate documentation, pricing records, and customer/product profiles to ensure seamless internal transitions.
• Cross-Functional Coordination: Collaborate with vendors and internal departments to resolve issues and align production with customer expectations.
• Process Ownership: Proactively identify and resolve potential order hurdles to maintain customer trust and operational flow.

Required Qualifications

• Experience: 3 to 5 years of experience in sales support, customer service, or order management, preferably within a manufacturing or industrial environment.
• Technical Skills: Very strong proficiency in ERP systems and Microsoft Office Suite.
• Communication: Ability to communicate clearly and professionally with a variety of internal and external stakeholders.
• Adaptability: A strong ability to adjust to shifting priorities and changing customer needs in a high-volume environment.
• Accountability: A track record of taking ownership of outcomes and following through on complex tasks from start to finish.

POSITION DESCRIPTION

This position is responsible for day-to-day compliance of safety programs and related activities at the Vernon, CA facility.

Responsibilities:

• Environmental Compliance Programs:Ensure operations are compliant with applicable federal, state, and local regulations.
• Conduct audits and training programs as needed.
• Establish a working relationship with appropriate regulatory agency personnel.
• Generate reports and permit applications (air, water, waste), ensure compliance with applicable permit requirements.
• Review proposed manufacturing changes and assess environmental impact.
• Work to reduce waste generation and support any remediation activities under the direction of the Corporate HSE Director and Regional HSE Manager.
• Health and Safety Programs:Have oversight of Industrial Hygiene, Fire Prevention LOTO, PPE, etc. Ensure that programs are in place to assist in meeting Company objectives.
• Ensure training programs and in place to ensure compliance.
• Implement accident, near miss, and observation reporting programs to proactively manage safety performance.
• Lead root cause analysis investigation and manage documentation confirm corrective actions have been put in place ensuring complete case management of injuries (reporting, workers compensation, return to work, etc.).
• Build communications required to present incident details and corrective action plans to diffident levels of the business.
• Ensure Job Safety and Environmental Analyses/Job Hazard Analysis are being conducted as required.
• Evaluate operational practices to determine methods to eliminate workplace hazards.

Qualifications:

• Bachelor’s degree in Health & Safety or the Sciences
• Min of 3+ years of Health & Safety experience 2 years in a manufacturing environment.
• Experience with OSHA, LOTO, Root Cause Analysis
• Union experience a plus
• Needs to have occasional flexibility on start time.

Calgon Carbon | A Kuraray Company currently has an opportunity where you can be a part of our growing team as we provide our customers with outstanding products that make the air we breathe and the water we use safe for generations to come.  

Position: Senior Technical Sales Representative
Location: US – Remote West Coast

Excellent Benefits: Medical, dental, prescription & vision, HSA & retirement savings (401k) – Generous Company Match!
Perks: Incentives/bonus plans, competitive pay, paid time off (vacation starting at 3 weeks), tuition reimbursement, wellness programs, fun events, learning & development opportunities.  

Hours of work: Full-time position with hours Monday - Friday, typically 8:30 AM - 5:00 PM
Travel: 50%; air, automobile, and overnight travel to visit customer sites, and company meetings

Responsible for the sale of activated carbon, equipment and services as well as growing and maintaining current business relationships within the defined geographical and/or market specific territories. This position is responsible for municipal and/or industrial sales for various markets such as environmental, chemical, food, drinking water, wastewater, groundwater, and process applications, and requires selling/influencing decision makers in procurement, operations, management, consulting engineers, general contractors, etc. Typical territory revenue responsibility $12-$20 MM (not confined to this range).  This role has more autonomy for managing his/her territory than the TSR IV role.

Duties and Responsibilities (not limited to)
 

• Prepare and document all sales proposals and customer communications as required by the company and business unit directives. This will include the use of GCRM to record and share meaningful customer and market information, bid results, competitive pricing, and other relevant activities
• Update sales forecast on a regular basis
• Keep the manager informed of all activities, including business threats and opportunities, in the assigned customer and market territory
• Assist with Accounts Receivables as needed
• Expand and strengthen the assigned business portfolio by driving strategic growth initiatives and cultivating high-value relationships across target markets
• Identify and secure new opportunities through proactive engagement, market intelligence, and alignment with organizational objectives
• Deliver exceptional customer service by maintaining a deep understanding of client needs and industry trends
• Build trusted, multi-level relationships with key stakeholders across consulting engineering firms, utilities, and manufacturing companies, ensuring tailored solutions and long-term value through best-in-class business practices
• Conduct all activities with a strong commitment to health, safety, and environmental awareness
• Promote safe business practices through professional behavior and by supporting company policies and standards in interactions with customers, partners, and colleagues
• Attend and be involved with market specific conferences and organizations
• Influence/Drive the creation of marketing collateral through communication of market specific needs
• Coordinate and participate in webinars, seminars and/or Lunch and Learns, as needed, to educate customers, prospects, engineering firms, and other stakeholders
• Responsible for the achievement of geographical territory annual sales, profit, and other plan goals
• Conduct regular outbound sales calls to prospect, qualify, and nurture leads, ensuring a full and healthy sales pipeline
• Initiate follow-up calls with prospective and existing clients to build relationships, address needs and advance opportunities through the sales cycle
• Assigned to special projects or initiatives on an as-needed basis
• Organize and/or present relevant technical-based presentations to customers, engineering firms and other market influencers or stakeholders
• Execute market strategies to strengthen Calgon Carbon’s position versus the competition
• Conduct activities in accordance with the marketing plan and sales strategies for assigned customer and market responsibilities
• Actively participate in training activities
   

Qualifications

• A Bachelor's degree (B.A. or B.S.), or equivalent from four-year college or university is required
• An MBA is preferred
• 7-10 years of Technical Sales Experience is required
• Experience in chemical manufacturing/industrial sales is preferred

More about Calgon Carbon, A Kuraray Company 

We are a company of scientific innovators with over 205 patents. For over 75 years, we’ve been innovating solutions to the world’s emerging challenges. Since creating the first activated carbon products from bituminous coal in the 1940s, Calgon Carbon has been a pioneer in developing advanced products, systems and services for air and water purification. Calgon Carbon’s product portfolio now encompasses more than 700 direct market applications. 

Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,350 people and operates 20 manufacturing, reactivation, innovation and equipment fabrication facilities in the U.S., Asia, and in Europe, where Calgon Carbon is known as Chemviron. 

Calgon Carbon was acquired by Kuraray in March of 2018. With complementary products and services, the combined organization will continue to focus on providing the highest quality and most innovative activated carbon and filtration media products, equipment, and services to meet customer needs anywhere in the world. 

Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran

PIa0921025d61c-3631

The Assistant Controller plays a critical role in supporting Finance Director in managing accounting operations for two Business Units. This position focuses on inventory control, cost accounting, and audit compliance, ensuring accurate financial reporting and adherence to industry standards. The role requires strong analytical skills, attention to detail, and the ability to work collaboratively across departments.

Pay Range: $105,000.00 to $135,000.00 per year. Final compensation will be based on experience and qualifications.

Essential Duties and Responsibilities

This is not intended as a comprehensive list; it is intended to provide a representative summary of the major duties and responsibilities. Incumbent(s) may not be required to perform all duties listed, and may be required to perform additional, position-specific tasks.

• 
  
• Inventory & Cost Accounting
  
  
  • 
    
  • Oversee inventory accounting processes, including valuation, reconciliation, and reporting.
    
  • Maintain and analyze costs, variances, and manufacturing overhead allocations.
    
  • Partner with operations and supply chain teams to ensure accurate inventory tracking and cost control.
    
  
  
  
• Program Finance & EAC Management
  
  • 
    
  • Collaborate with Program Managers to monitor program financial performance.
    
  • Review Estimate at Completion (EAC) reports, ensuring accuracy and alignment with program budgets.
    
  • Track program costs, revenue recognition, and margin analysis for long-term contracts.
    
  • Provide financial insights to support program decision-making and risk mitigation.
    
  
  
  
• Financial Reporting & Compliance
  
  • 
    
  • Prepare and review monthly, quarterly, and annual financial statements in accordance with GAAP.
    
  • Ensure compliance with internal policies, SOX requirements, and external regulations.
    
  • Support internal and external audits, providing documentation and resolving inquiries.
    
  
  
  
• Accounting Operations
  
  • 
    
  • Manage general ledger activities, including journal entries and account reconciliations.
    
  • Oversee accounts payable, accounts receivable, and payroll functions as needed.
    
  • Assist with month-end and year-end close processes.
    
  
  
  
• Budgeting & Forecasting
  
  • 
    
  • Contribute to annual budgeting and periodic forecasting processes.
    
  • Provide cost analysis and variance reporting to support decision-making.
    
  
  
  
• Process Improvement & Systems
  
  • 
    
  • Identify opportunities to streamline accounting processes and improve efficiency.
    
  • Support ERP system enhancements and automation initiatives.
    
  
  
  
• Team Leadership
  

Supervise and mentor accounting staff, fostering a culture of accuracy and accountability.

• Strong background in inventory management, cost accounting, and audit support.
• Bachelor's degree from an accredited institution in Finance or Accounting.
• Formal training and in-depth experience in cost accounting, financial accounting, local, state, and federal tax regulations, and financial analysis & reporting.
• Minimum 5 years of accounting experience.

Desired Qualifications

• Manufacturing environment

• Strong analytical and evaluative skills
• Developed written and oral communication skills
• Strong interpersonal skills as this team member will interact frequently with personnel outside of accounting and finance department.
• Strong decision-making skills: incumbent needs to analyze and synthesize data, and be able to make decisions without having complete information
• Expert user of Microsoft Office products

Additional Eligibility Qualifications

The Company will only employ those who are legally authorized to work in the United States for this opening. US Citizenship or Permanent Residence (Green Card) is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening.

Any offer of employment is conditioned upon the successful completion of a background investigation and drug screen. Candidate must also pass a basic visual acuity exam.

This position is currently accepting applications.

Apply Now

We are seeking a motivated and experienced, Tungsten Inert Gas (TIG) Welder to join our aerospace manufacturing team. This position is ideal for individuals who have experience and are eager to grow within a structured and supportive environment. You will assist in the welding, fabrication, and assembly of propellant space tank systems and sub-assemblies.

Pay Range: $40 to $60 per hour.

• Weld, assemble, and fabricate various propellant space tank systems and sub-assembly components using GTAW (TIG) welding methods
• Use precision-calibrated tools such as torque wrenches, micrometers, and calipers to ensure quality and accuracy
• Perform work in accordance with detailed procedures, specifications, and test instructions
• Read and interpret technical drawings and manufacturing work instructions
• Utilize various mechanical tools and equipment with minimal supervision
• Operate forklifts, overhead cranes, and other heavy equipment safely
• Perform surface preparation processes such as blending, filing, and abrading of flight hardware
• Maintain a clean and organized workspace, ensuring compliance with safety standards
• Support team members with additional duties as required to ensure efficient operations

Qualifications:

• Minimum 5 years of aerospace welding experience
• High school diploma or GED required
• Technical training or certification in TIG welding
• Understanding of GTAW techniques and material weldability
• Ability to read blueprints or technical drawings
• Willingness to learn and follow precise instructions and procedures
• Strong attention to detail and pride in workmanship
• Ability to work well in a team and communicate effectively
• Comfortable working with hand tools and shop equipment
• Forklift or crane certification is a plus

Work Environment:

• Aerospace clean room and shop environment
• Exposure to high-precision components and tight tolerances
• Regular lifting of up to 50 lbs and standing for extended periods

This position is currently accepting applications.

Apply Now

Are you an experienced Grind Operator with strong centreless grinding capability in a precision manufacturing environment? Do you want to work on safety critical components where quality and consistency are essential? Are you looking for long term stability and development in a growing aerospace business? If so, this opportunity may be the right next step for you.

This business is a leading aerospace fastener manufacturer supporting highly demanding applications. With fully vertically integrated operations including forging, heat treatment, machining, centreless grinding, thread rolling, NDT and mechanical testing, the operation is built around quality, accountability and continuous improvement.

The purpose of this role is to produce high quality aerospace components using centreless grinding processes, ensuring all parts meet drawing and specification requirements while maintaining safe working practices.

As the Grind Operator your responsibilities will include

• Producing parts using centreless grinding methods that meet drawing and specification requirements
• Verifying machine settings prior to operation
• Following customer and internal work instructions accurately
• Performing basic machine maintenance in line with PM schedules
• Troubleshooting tooling or equipment issues and maintaining shop floor standards

As the Grind Operator you will bring

• Ability to read and interpret engineering drawings
• Strong shop maths skills and basic computer literacy
• Three to five years or more of centreless grinding experience
• Experience using inspection equipment including micrometers and calipers
• Background working with manual OM grinders, camout machines or CNC grinders

You will join a business with a positive and supportive culture where people are encouraged to develop and grow. Competitive pay is offered alongside clear long term career opportunity, making this an environment where commitment and skill are genuinely valued.

This role requires the ability to stand for extended periods and lift up to 30 lbs in line with EHS policies, with flexibility to work overtime when required.

All successful applicants will be contacted within two working days.

Position Summary:

Who we are: AGSE is a recognized leader in the design and manufacture of aerospace ground support equipment, serving the world’s top aerospace organizations. We are in the midst of a cultural transformation, moving from tribal knowledge and manual reactive processes to a data-driven, standardized, and continuously improving operation. This is your chance to join a team that is committed to real change, not just “checking the box” on Lean.

What You’ll Do: You will be an active partner in driving our transformation—building systems, not just projects. Your focus will be on embedding continuous improvement as a mindset at every level, not just as a set of tools. Your day-to-day will combine process analysis, hands-on problem solving, cross-functional coaching, and project execution, with a direct line to senior leadership.

You won’t just analyze; you’ll implement, teach, and sustain.

Responsibilities: Essential Duties:

· Lead Improvement Projects: Identify, plan, and execute high-impact Lean, Six Sigma, and digital transformation projects focused on operational bottlenecks (quality escapes, long prep times, inefficient assembly, etc.).

· Drive Standardization: Document tribal knowledge into robust SOPs and work instructions; pilot and roll out digital work instruction tools and visual management boards.

· Coach & Train: Deliver hands-on Lean/CI training for operators, leads, and supervisors, focusing on practical skills (problem solving, process mapping, visual management, mistake-proofing, etc.).

· Data-Driven Action: Design meaningful KPIs, collect and analyze shopfloor data (scrap, rework, cycle times, downtime, OTD, etc.), and implement root cause analysis and countermeasures.

· Champion Digital Tools: Work with AI, automation, and analytics tools (Power Automate, ERP integrations, Excel, Power BI) to move the factory toward a paperless, digitally enabled environment.

· Facilitate Change: Run kaizen events, lead daily/weekly Gemba walks, facilitate feedback loops, and support the development of a true continuous improvement culture.

· Collaborate Across Functions: Partner with Quality, Engineering, Production, and Supply Chain to drive cross-functional initiatives and standardize processes.

· Tackle Real Problems: Address recurring issues like final inspection escapes, part marking accuracy, FOD/scratches, material flow, and inefficiencies in manual-heavy processes.

· Measure and Report Savings: Continuous improvement impacts in terms of dollars saved, hours reduced, and risk mitigated; report out to leadership and stakeholders.

Work Location: Santa Fe Springs, CA. 100% Onsite work. No remote nor hybrid availability for this role.

Expertise: Knowledge & Skills:

· 3+ years of hands-on experience in a Lean/Continuous Improvement, manufacturing, or operations engineering role.

· Strong working knowledge of Lean Manufacturing (5S, Value Stream Mapping, SMED, Poka-Yoke, Visual Management), Six Sigma (DMAIC, root cause analysis), and process mapping.

· Track record of driving real improvements, measurable cost savings, cycle time reductions, quality improvements.

· Experience creating and implementing Standard Work, SOPs, and operator-level training.

· Familiarity or experience with digital tools for shop floor (Power BI, Excel, Power Automate, digital checklists, etc.).

· Excellent communication, coaching, and facilitation skills; able to work at all levels from shop floor to leadership.

· Highly self-motivated, able to work with minimal supervision, and thrives in a dynamic, hands-on environment.

· Certification in Lean, Six Sigma (Green/Black Belt), or equivalent experience is highly preferred.

Nice to Have

· Experience supporting or leading ERP transitions (Epicor, Global Shop, etc.).

· Exposure to AI, automation, or advanced manufacturing technologies.

· Background in aerospace, heavy fabrication, or complex assembly environments.

· Experience implementing digital work instruction systems or MES.

· Knowledge of ISO 9001/AS9100 QMS requirements.

Required:

· Bachelor’s degree in: Bachelor’s degree in Industrial, Manufacturing, Mechanical Engineering or related technical field.

· Manufacturing engineering experience a must

· Six Sigma Black Belt, Lean, Quality, or other related certification preferred.

· Onsite role. No hybrid nor remote work available for this role

· Ability to work non-standard schedule as needed.

Physical Demands:

While performing the duties of this job, the employee is regularly required to sit and talk or listen. The employee frequently is required to use hands to handle or feel and reach with hands and arms. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds.

Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.

• Noise Intensity: Moderate
• Occasionally: Office environment, Production/manufacturing environment, Warehouse environment

Pay Range: $90,000 - $120,000 plus a discretionary bonus.

While a Company bonus is not guaranteed, this position’s maximum bonus percentage range can be up to 10% of base salary.

Company bonuses are not guaranteed and are based on your performance, the department’s performance and/or the Company’s financial results.

AGSE is required by law in certain jurisdictions to include a pay scale in the job posting for this position. "Pay scale" means the salary or hourly range that AGSE reasonably expects to pay for this position; it is neither a promise nor a guarantee of the compensation that the successful candidate will receive. The pay scale for this position considers the wide range of factors that AGSE considers in making compensation decisions, including, without limitation: skill set, experience, and training, licensure and certifications, and other business and organizational needs. Please note that it is not typical for AGSE employees to be at or near the top of the pay scale for their role - especially as a new hire - and compensation decisions are dependent on the facts and circumstances of each case.

Job Type: Full-time

Pay: $90,000.00 - $120,000.00 per year

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Referral program
• Tuition reimbursement
• Vision insurance

Work Location: In person

Responsibilities:

• Operate 3 and 5 axis milling machines. Writing machine programs using MASTERCAM. Conventional machining skill. Ability to read engineering drawings and follow process and specifications. Strong communication skills.

Basic Qualifications:

• High School Diploma/GED and minimum 5 years of CNC programming/machining experience.

• Must have strong knowledge of Mastercam to program 3 and 5-axis parts.

• Prior Experience operating Haas CNC machines.

• Ability to obtain and maintain a DoD Secret Security Clearance and meet the approval process for individual SAR program access.

• Must be willing to work 1st or 2nd shift and overtime as needed.

Preferred Qualifications:

• 10 or more years of related CNC machining experience.

• Experience with Mazak CNC machines.

• Ability to operate EDM and Plunge/Sinker machines.

• Current Secret security clearance and ability to meet the approval process for individual SAR program access.

Northrop Grumman Aeronautics Systems has an opening for a Sr Principal Engineer Air Breathing Propulsion to join our team of qualified, diverse individuals. This position will be located in Redondo Beach, CA.

As an engineer supporting the Air Breathing Propulsion section, the selected candidate will support the design and analysis needs of unclassified and classified programs in Redondo Beach, California.  Candidate will interface with customers to define study areas and report status on current programs and technology development efforts.  Candidate may interface with their management and technical teams to define business relationships and technology initiatives for both IRAD (Internal Research and Development) and CRAD (Contractual Research and Development) efforts.  This position will support a variety of programs performing analysis and integration activities.

Essential Functions:

• Lead engine performance and cycle analysis and provide guidance to programs
• Lead subsonic and supersonic inlet and exhaust design and integration
• Perform project planning to determine program requirements and develop plans for program execution
• Interface with external engine suppliers and manage external engine supplier activities
• Interface with internal and external customers, assisting in defining system requirements, defining study areas, and providing status on current programs and technology
• Develop and present materials for internal and external program related briefings
• Support new business generation and prepare proposal material
• Strong verbal and communication skills to interact with key cross-discipline stakeholders to achieve program objectives in a timely manner
• Technical and ICD writing
• Task planning, conducting technical peer reviews, and mentoring junior engineers
• Apply and contribute to the development of advanced technical principles, theories, and concepts.
• Work on complex technical problems and provide solutions which are highly innovative
• Collaborate and execute on long-range goals and objectives.
• Develop advanced technological ideas and guide development into a final product.

Basic Qualifications for a Sr Principal Engineer:

• Bachelor's degree in a STEM discipline (Science, Technology, Engineering or Math) with 12 years of related engineering experience; OR a Master’s degree in STEM with 10 years of related engineering experience; OR a PhD in STEM with 8 years of related engineering experience.
• Air Breathing Propulsion knowledge and experience on aircraft (subsonic, supersonic or hypersonic) or missile systems.
• Ability and willingness to travel 25% of the time.
• Must have an active DoD Secret (or higher) clearance (with a background investigation within the past 6 years or enrolled into Continuous Education).
• Must have the ability to obtain and maintain Special Access Program (SAP) clearance.

Preferred Qualifications:

• Ten plus (10+) years of experience with Aeronautical Air Breathing Propulsion and Flight Sciences engineering disciplines.
• Experience with survivable propulsion systems
• Experience in technical leadership and guidance of junior Air Breathing Propulsion engineers.
• Experience in Air Breathing Propulsion processes and products throughout the program life cycle.
• Experience in hypersonic design and analysis
• Demonstrated ability to lead an engineering cross-functional team.
• Experience with Agile design teams and tools(Atlassian)
• Understanding of Systems Engineering Principles and Model Based Systems Engineering tools (MBSE) with a practical focus for relevant use cases in propulsion integration.
• Experience with PLM software (Teamcenter)
• Serve as organization spokesperson on advanced projects and/or programs. Act as advisor to management and customers on advanced technical research studies and applications.
• A current active in-scope U.S. Government DoD Top Secret clearance with current or previous Special Program Access (SAP/PAR).

PilotCBP Air Interdiction Agent

NEW RECRUITMENT AND RETENTION INCENTIVES!

Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.

If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demandAPPLY TODAY!

DONT FORGET TO CHECK OUT THE INCENTIVES SEE SALARY SECTION BELOW!

Duty Locations

Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:

Southeast Region:Homestead, FL and CAMB:Aguadilla, PR

Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX

NASOC UAS locations:Sierra Vista, AZ; San Angelo, TX

Duties and Responsibilities

As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:

• Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
• Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
• Collecting, refining, and analyzing strategic and tactical intelligence.
• Supporting search and rescue and humanitarian efforts.

Salary and Benefits

Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).

Recruitment Incentive:New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)

Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.

This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).

• GS-11, 1st year annual pay - $106,588
• GS-12, 2nd year annual pay - $127,754
• GS-13, 3rd year annual pay - $151,918

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).

• GS-11, 1st year annual pay - $115,115
• GS-12, 2nd year annual pay - $137,974
• GS-13, 3rd year annual pay - $164,071

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).

• GS-11, 1st year annual pay - $127,906
• GS-12, 2nd year annual pay - $153,305
• GS-13, 3rd year annual pay - $182,302

Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.

• RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)

• RI: Retention Incentive (25% for Key West, FL)

RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)

Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications

Experience:You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:

• Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
• Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
• Developing strategies and coordinating aircraft and ground assets.
• Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
• Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.

Hiring Minimums:

Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:

• Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
• Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
• Helicopter Rated: Rotorcraft Helicopter with instrument rating.
• Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).

Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.

250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.

FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.

Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)

UAS Flight Hours:Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the ""Total flight time"" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the ""day before an individual's 37th birthday"" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.

NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.

Age Waiver: Creditable law enforcement officer service -Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decisionIsabellav.Dept of State,the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training:This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply

There Are Three Ways to Apply to Become an Air Interdiction Agent:

• Fill out theAir Interdiction Agent applicant checklistand email it to a recruiter at along with a copy of your resume; OR

• Apply onUSAJOBS;OR

• Apply onAirline Apps.

Stay Updated Opt into CBPs talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. Youll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

• Government & Military

• Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
• Completing Joint Professional Military Education (JPME) at one of the various service colleges

We’re seeking an experienced Sales Support Representative to partner with sales, technical, and procurement teams in a fast‑paced IT services environment. This role is ideal for someone who thrives on organization, cross‑functional collaboration, and supporting revenue growth across technology, telecom, network, and infrastructure solutions.

What You’ll Do

• Support the end‑to‑end sales lifecycle, including RFP/RFQ coordination, pipeline tracking, and order fulfillment
• Partner closely with sales, engineering, finance, and vendors to ensure accurate, timely delivery of IT solutions
• Maintain and organize sales documentation, pricing, contracts, and proposals
• Enable pipeline generation through strong administrative support and process execution

What You Bring

• 5+ years of administrative experience supporting sales, marketing, or procurement teams
• Hands‑on experience with RFPs/RFQs and sales pipelines in an IT services or technology solutions environment
• Strong understanding of telecom, network, or infrastructure services
• Exceptional organizational and communication skills, with proven success working across cross‑functional teams

Why This Role

• High‑impact position supporting complex IT solutions
• Exposure to enterprise‑level technology deals
• Collaborative, team‑oriented environment where your support directly drives sales success

Job Type & Location

This is a Contract to Hire position based out of Torrance, CA.

The pay range for this position is $30.00 - $35.00/hr.

Eligibility requirements apply to some benefits and may depend on your job
classification and length of employment. Benefits are subject to change and may be
subject to specific elections, plan, or program terms. If eligible, the benefits
available for this temporary role may include the following:

• Medical, dental & vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life & AD&D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave)

This is a fully onsite position in Torrance,CA.

This position is anticipated to close on Mar 20, 2026.

We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at .

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Company Description

Meadows Mechanical is a trusted provider of plumbing, piping, and sheet metal services based in the Los Angeles area. With over 76 years of experience, the company has established a strong reputation in the aerospace and healthcare industries. Meadows Mechanical specializes in executing complex projects with expertise and confidence, drawing on its decades-long legacy. The company emphasizes quality and reliability in delivering tailored solutions to meet client needs.

Role Description

This is a full-time on-site role located in Gardena, CA, for a Project Engineer. The Project Engineer will oversee and manage engineering projects, including project planning, coordination, and execution. Responsibilities also include ensuring technical standards are met, collaborating with cross-functional teams, and maintaining clear communication with stakeholders. The role involves applying engineering principles to support successful project outcomes while adhering to timelines and budgets.

Qualifications

• Strong skills in Project Engineering, Project Management, and Project Planning
• Proficiency in Mechanical Engineering principles and practices
• Excellent Communication skills, with the ability to convey technical information effectively
• Organizational and problem-solving abilities
• Bachelor’s degree in Mechanical, Electrical, or related Engineering field
• Familiarity with aerospace or healthcare industries is a plus
• Ability to work on-site in Gardena, CA
• Experience with CAD software and project management tools is advantageous

Responsibilities

• Assist Project Manager(s) in planning project scope, schedule, manpower, and resource allocations.
• Coordinate between design team, contractors, subcontractors, and suppliers to ensure all parties have the latest documents and information.
• Interpret design drawings, specifications, and codes; provide technical guidance and clarification to field teams.
• Prepare, track, and process Requests for Information (RFIs), submittals, and change orders.
• Support budget tracking, cost control, and change order management processes.
• Maintain up-to-date project documentation, including RFI logs, submittal logs, and equipment procurement schedules.
• Assist in procurement activities, including preparing purchase requisitions, comparing supplier quotations, and tracking deliveries.
• Work with the accounting team to prepare project billings, review subcontractor payment applications, and support project financial reporting.
• Monitor construction progress, perform site visits, and verify that work aligns with project plans, schedules, and quality standards.
• Participate in job walks, punch list reviews, site inspections, and safety walks.
• Act as a liaison between office engineering/management staff and field construction teams, ensuring accurate communication of design revisions, clarifications, and changes.
• Support pre-commissioning and commissioning activities with contractors, vendors, and project teams.
• Ensure accurate closeout deliverables, including as-built drawings, O&M manuals, warranties, and turnover documents.
• Perform other duties as assigned in support of project goals and company objectives.

Salary Range

• $60,000 – $100,000 per year, depending on experience and qualifications.

As we continue to enhance our digital customer experience, we’re seeking a dynamic temporary Ecommerce Manager to lead key growth initiatives across our ecommerce website.

The temporary Ecommerce Manager will be responsible for owning key strategic areas of our digital business, including but not limited to: planning and executing site content on Shopify, optimizing the online customer journey including reporting, and driving impactful digital promotions and campaigns. This role is ideal for someone who thrives in an entrepreneurial environment, who can lead strategy development and execute creatively to deliver results.

Essential Job Functions & Responsibilities:

• Lead the strategy, optimization, and performance of the Windsor eCommerce homepage in addition to key digital touchpoints across
• Oversee daily content updates and overall site experience in partnership with product, UX, customer service and engineering teams
• Drive KPIs around site engagement and conversion while delivering ongoing analytics reporting and actionable insights
• Collaborate with merchandising, design, SEO and marketing teams to leverage site content, identify opportunities and optimize on-site incentives
• Develop and deliver seamless omnichannel promotions in partnership with buying, marketing and customer service teams
• Manage on-site discount code creation, execution and maintenance alongside sitewide promotional initiatives
• Lead cross-functional efforts to monitor, report on and improve page speed and overall web performance, driving higher conversion, stronger search visibility, and an enhanced user experience
• Partner with our third-party returns vendor to optimize the online customer returns experience
• Own the brand protection initiative in partnership with our third-party vendor to identify and remove counterfeit listings and fraudulent websites
• Analyze eCommerce trends and competitor insights to guide best practices and support strategic planning for

Key Qualifications & Requirements:

• Business or Communications related degree
• Fashion retail or DTC brand experience
• Minimum 5+ years experience in a fast-paced, ecommerce business, with direct experience managing site content
• Must have hands-on experience using Shopify Plus

• Strong analytical skills, with proven experience working with reporting and analyzing data to drive results
• Strong market research skills & a knowledge of the fashion industry
• Strong writing &presentation skills
• Experience leading projects and working collaboratively across departments
• Proven experience driving change and innovation online
• Ability to multitask and meet deadlines, whilst maintaining close attention to detail

Physical/Environmental Demands and Overtime & Availability

Work is performed in an office environment and requires the ability to operate standard office equipment and keyboards. Must have the ability to walk short distances. Sedentary work. Exerting up to 10 pounds of force occasionally and/or a small amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects. Repetitive motion. Adequate movements(motions) of the wrists, hands, and/or fingers. Team members are required to have close visual acuity to perform activities such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading.

*

Job descriptions are merely a summary of the position. Duties and responsibilities are subject to change and may include any other that management finds necessary to successfully maintain business operations.

WINDSOR EQUAL OPPORTUNITY EMPLOYER