Engineering Jobs in Ny

Job Category: Operations Field

Requisition Number: CIDER016988

Posted: February 1, 2025

Full-Time

On-site

New York, New York, USA

Primary Job Responsibilities:

• Practice safety rules.
• Follow verbal and written instructions.
• Report to and assist immediate supervisor.
• Perform quality work as determined by project specifications.
• Accountable for all tools and materials at the end of your shift.
• Must work well as part of a team.
• Safety - Safety is a core value of our company and no job is so important that it cannot be completed safely. It is the responsibility of all employees to know and understand and comply with all company safety policies and federal, state, and local regulations. Employees have a responsibility to stop and correct unsafe work practices and to refuse to work in an unsafe situation.
• Mobilization and Demobilization - Ability to mobilize equipment being operated, including loading, unloading, securing, set up and tear down.
• Equipment Maintenance - Ensure that all equipment, vehicles, and tools are properly accounted for, used for correct purpose and are maintained.
• Other Serves as backup to other positions at the direction of management; and other duties as assigned.
• Lift, push, pull up to 50 pounds daily, seldom over 50 pounds.
• Grasp and manipulate various hand tools daily.
• Standing for more than two hours at a time, as well twisting, bending, pulling, pushing, reaching, and stooping regularly.
• Identify/distinguish colors and use of manual dexterity and fine motor skills.
• Communicate orally as well as ability to hear and understand.
• Work and operate motorized equipment as well as safely perform procedures where carelessness would potentially result in injury.
• Work in an environment that is uncomfortable due to drafts, noise, temperature variation or similar discomforts.
• Ability to proofread and check documents for accuracy, as well as use a keyboard to enter and transform words or data.
• Must comply with company's drug and alcohol abuse policy.
• Must be able to pass physical examination, pre-employment if necessary, and as required by the company.
• Able to climb and maintain balance on ladders, scaffolding, stairways, etc.
• Stoop, kneel, crouch, crawl, or work at elevated heights as well as in confined spaces (towers, vessels, excavations, etc.).
• It is recommended to get assistance to lift items over 50 lbs. Check with your project supervisor or project safety director.
• Must be able to work extended hours on your feet on uneven surfaces (dirt, concrete, asphalt, mud, gravel, etc.)
• Must be clean shaven and able to work while wearing a respirator and other personal protective equipment, when required.

Work Location

• Industrial construction sites and/or fabrication shops.

Mobility Barriers

• Uneven ground
• Obstructed pathways
• Work at low/high elevations
• Confined workspaces

Environmental Conditions

• Predominantly outdoor work
• Exposure to:
  • Extreme heat or cold
  • Humidity, rain, and other weather conditions
  • Loud noise from tools and machinery
  • Potential chemical exposure

Education & Experience Requirements:

• Minimum 1-2 years related experience excavating near underground utilities.
• Valid driver's license required.

Company Overview:

Primoris Services Corporation is a premier specialty contractor providing critical infrastructure services to the utility, energy, and renewables markets throughout the United States and Canada. Built on a foundation of trust, we deliver a range of engineering, construction, and maintenance services that power, connect, and enhance society. On projects spanning utility-scale solar, renewables, power delivery, communications, and transportation infrastructure, we offer unmatched value to our clients, a safe and entrepreneurial culture to our employees, and innovation and excellence to our communities.

Benefits:

• 401k w/employer match
• Health/Dental/Vision insurance plans
• Paid time off
• Stock purchase plan

Agency Statement:

We are not accepting resumes from Third Party Recruiting Firms for this position. If you are an Agency or Search firm representative, contact the Primoris Talent Acquisition Manager directly for consideration. Primoris or its subsidiaries will not be responsible for any fees arising from the use of resumes and online response forms through this source. In addition, Primoris or its subsidiaries will not be responsible for any fees on unsolicited resumes that are submitted to any member of the Staffing or Operations team. Primoris has established an approved vendor program for this service and will only consider accepting submissions from those approved firms. For consideration in becoming an approved vendor, contact HR.

Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

• Upsell and Expand: Identify and act on opportunities to grow platform usage and adoption within each account (e.g., new advisor teams, new features, deeper integrations).
• Drive Adoption: Lead advisor engagement post-sale by training teams, driving daily usage, and embedding Vise into the firm's operating rhythm. Success means AUM managed on Vise grows consistently.
• Own Relationships: Be the primary point of contact for named enterprise accounts-building trust, anticipating needs, and making sure advisors and home office stakeholders are set up for long-term success.
• Be the Client Voice: Capture advisor feedback and surface insights internally to influence product development, roadmap priorities, and client experience improvements.
• Orchestrate Onboarding: Partner with implementation, product, and service teams to seamlessly onboard new firms and teams-ensuring a smooth transition and successful launch.
• Collaborate Cross-Functionally: Liaise with sales, investments, product, and marketing to align efforts and execute on account growth strategies.
• Support Strategic Projects: Join demos, prep executive updates, and help shape the enterprise success playbook as we scale.

• 3+ years of experience in account management, relationship management, or client success in a B2B SaaS, fintech, or wealth management environment
• Experience working with or selling to financial advisors, broker-dealers, or enterprise RIAs
• Knowledge of investment products and strategies commonly used by financial advisors
• Proven track record of driving adoption, increasing product usage, and growing client relationships
• A sales-forward, consultative mindset with the ability to identify upsell opportunities and close them in partnership with sales
• Comfort managing enterprise clients with complex organizational structures and high expectations
• Strong communication and relationship-building skills-both with advisors and internal stakeholders
• Highly organized and proactive, with the ability to juggle multiple priorities and keep momentum across accounts
• Strong understanding of investment platforms, TAMPs, custodians (e.g., Schwab, Fidelity, Pershing), and the advisor tech stack is a plus
• Experience with Salesforce and comfort analyzing account data to inform strategy

• Opportunity to make a significant impact at a hyper-growth fintech start-up
• Competitive salary and equity
• Unlimited PTO and great benefits, including $1 medical insurance
• 401k plan with generous matching and self-directed brokerage account option
• Access to investment management and free financial advice from one of our partner RIA firms
• Paid lunches at our NYC office
• Career growth and development opportunities

• 
  
• 
  Career Development: We invest in your growth - our Operator Advancement Program supports your goals. We provide operators and assemblers at all levels the opportunity to certify their skills and build their career with us up to 3 times a year by applying to the OAP program. TTM promoted 68% of applicants in the program's first year!
  
• 
  Competitive Compensation: We offer a competitive package that reflects your skills and experience along with annual compensation reviews to ensure your growth is aligned with your performance and market trends.
  
• 
  Comprehensive Benefits and PTO: Including health, dental, and vision insurance to keep you at your best. Enjoy 10 paid holidays and 3 weeks of paid time off annually to recharge.
  

• 
  
• Perform maintenance tasks to maintain equipment in good condition.
  
• Operates test equipment to perform pass/fail product tests.
  
• Daily communication with all team members and supervisor through the use of shift meetings, email, log book, and other written and verbal methods.
  
• Maintain clean, safe and orderly work environment.
  
• Ability to interpret and follow verbal and written work orders.
  
• Use various measuring tools as required.
  
• Offer suggestions to improve/enhance processes.
  
• Report any problems, defective materials, questionable conditions or unsafe conditions to supervisor or leader
  
• Provide high quality and timely service to all internal customers.
  
• Take personal ownership of internal and external customer issues.
  

• 
  
• Ability to follow detailed written and verbal instructions
  
• Ability to perform basic and routine repetitive mechanical assembly operations on components and subassemblies using fixtures, screwdrivers, etc.
  
• Proficient use and familiarity with hand tools.
  
• Will require basic mechanical skills.
  
• Ability to read, and follow assembly instructions, including visual aids and drawings.
  
• Ability to work both independently and as part of a team.
  
• May require limited soldering skills.
  

As one of Clay's Enterprise Growth Strategists, you'll partner with some of the fastest-growing SaaS companies in the world (think Intercom, Verkada, Anthropic) to define, scale, and continuously expand their Clay strategy.

You'll work directly with senior GTM leaders to:

• Map their growth priorities
• Translate those into actionable Clay use cases
• Expand Clay into new teams and workflows
• Shape the roadmap of both their GTM engine and Clay itself

You are not just supporting customers, you're a strategic business partner, trusted advisor, and internal product voice.

• Onboard with velocity & vision: Guide customers to their first \"aha\" moment in Clay, ensuring fast time-to-value while positioning Clay as a long-term strategic lever.
• Be a growth partner: Act as an extension of our customers' GTM teams by co-creating new plays, uncovering fresh use cases, and helping them stay ahead of their competitors.
• Drive ongoing adoption & expansion: Continuously identify opportunities for Clay across sales, revops, marketing, and CX, expanding Clay's footprint within the org.
• Shape renewal outcomes: By driving outsized value, ensure every customer sees Clay as indispensable, leading to strong renewals and multi-team expansions.
• Influence our roadmap: Synthesize patterns from enterprise accounts and collaborate with Product, Engineering, and Design to bring customer-driven innovation to Clay.
• Build new programs from scratch: Design scalable frameworks, playbooks, and initiatives for future Enterprise customers.

This role is for someone who wants to sit at the intersection of customer strategy, product vision, and GTM innovation and help some of the fastest-growing companies in the world find their edge with Clay.

• Strategic, product-minded thinking: You don't just solve today's problem: you see around corners, help customers envision what's next, and connect their roadmap to ours.
• Deep GTM fluency: You've lived in B2B SaaS and can speak the language of revops, sales, and marketing leaders. Bonus if you've held an in-house GTM operator role.
• Customer obsession with business savvy: You've worked directly with customers (not just managed accounts) and you know how to build trust, challenge thinking, and deliver impact.
• Builder DNA: You thrive in ambiguity, love creating structure where none exists, and get energy from designing processes and teams from 0 ? 1.
• Passion for Clay: You believe in our mission and are excited to evangelize Clay as if it were your own product.

At Delta Air Lines, connection is at the heart of everything we do and guides our every action. We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience.

As a Ground Maintenance Technician (GMT) in a stationary role, you will be a part of Delta's Ground Support Equipment team. A GMT (Stationary) specializes in completing repairs and utilizes preventive maintenance on motors and controls, Programmable Logic Controllers (PLC), pneumatic systems, conveyor systems, and machine shop equipment. The ideal candidate is proficient in the use of diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications to resolve malfunctions and maintain equipment.

Summary of responsibilities:

• Locates sources of problems by observing mechanical devices in operation and repair with precision measuring and testing instruments.
• Determines changes in dimensional requirements of parts by inspecting used parts and using rulers, calipers, micrometers, and other measuring instruments.
• Ensures the proper functioning of mechanical, electro-mechanical, and electronic equipment by troubleshooting, repairing, maintaining, and calibrating industrial equipment and test equipment throughout Stationary GSE in accordance with approved manuals and procedures.
• Maintains equipment, parts, and supplies inventories by checking stock to log inventory levels; anticipating need; placing and expediting orders; and verifying receipt.
• Prepares maintenance reports by collecting, analyzing, and summarizing information and trends.

Qualified candidates must also possess at least one of the following:

• Electrical/Relay knowledge: Understanding and proficiency in repairing 12 to 50 VAC/DC control circuits, 120 VAC single-phase electrical circuits and control circuits, 480 VAC 3-phase electrical systems.
• PLC Controls/Network: Proficiency and knowledge of repairing PLC and the associated computer network systems. Allen Bradly PLCS, SLC 500, SLC 5000 and Micro Logix systems.
• Industrial Maintenance/Conveyor Systems/Passenger Loading Bridges (PLB): Knowledge of system operations for PLB, system operation for conveyor systems and heavy equipment maintenance on hydraulics/electrical/mechanical on large industrial machinery.
• Industrial A/C refrigeration: Knowledge of high-pressure point-of-use pre-condition air systems, low-pressure glycol chiller systems, and repair and isolate system failures, as well as the related software for both high- and low-pressure control circuits systems.
• 400 Hz Generator/Inverter Ground Power: Strong understanding of electronic and electrical components and proficiency at identifying problems and repairing and rebuilding them. A background in 400 Hz, testing equipment as needed to perform repair/overhaul, and the ability to read electrical schematics and drawings are required. Familiarity with Jetpower II, Jetpower Plus, and CSI units. Experience operating passive and resistive load banks and working in an electronics environment.

Delta Air Lines will never ask candidates for money throughout our recruitment process, including for any pre-employment screenings. All email communications with Delta's recruitment team will come from a Delta email domain. If you have any questions about the legitimacy of an outreach from Delta's recruitment team, you can contact

Internal Movement Eligibility

• Consistently prioritizes safety and security of self, others, and personal data.
• Embrace diverse people, thinking, and styles.
• Possesses a high school diploma, GED, or high school equivalency.
• Is at least 18 years of age and has authorization to work in the United States.
• Must have a valid driver's license.
• Must be proficient in English.
• Ability to lift items weighing between 50 and 70 pounds.
• Be willing to work a fixed and/or rotating schedule including afternoons, evenings, weekends, and holidays.
• Completion of a two-year degree at a post-secondary technical school or have a minimum of three years of demonstrated ability.
• Must achieve a satisfactory score on entry tests structured to determine ability to perform required tasks.

• A detailed understanding of mechanical, electrical, hydraulic, and pneumatic subject areas.
• Ability to read, comprehend, and apply information found in technical documents, manuals, and schematics.
• Strong communication while working as a team and coordinating repairs with other GMTs and outside vendors.
• Respond to customers' needs with minimum direction and perform repairs in time-sensitive situations.

• Competitive salary, industry-leading profit sharing program, and performance incentives.
• 401(k) with generous company contributions up to 9%.
• New hires are eligible for up to 2-weeks of vacation. This is earned for use in the following vacation year (April 1 – March 31).
• In addition to vacation, new hires are eligible for up to 56 hours of paid personal time within a 12-month period.
• LGA/JFK employees may be reimbursed up to $250/month for specific transportation expenses through the NYC Transit Reimbursement Program.
• 10 paid holidays per calendar year.
• Birthing parents are eligible for 12-weeks of paid maternity/parental leave.
• Non-birthing parents are eligible for 2-weeks of paid parental leave.
• Comprehensive health benefits including medical, dental, vision, short/long term disability and life insurance benefits.
• Family care assistance through fertility support, surrogacy and adoption assistance, lactation support, subsidized back-up care, and programs that help with loved ones in all stages.
• Holistic Wellbeing programs to support physical, emotional, social, and financial health, including access to an employee assistance program offering support for you and anyone in your household, free financial coaching, and extensive resources supporting mental health.
• Domestic and International space-available flight privileges for employees and eligible family members.
• Career development programs to achieve your long-term career goals.
• World-wide partnerships to engage in community service and innovative goals created to focus on sustainability and reducing our carbon footprint.
• Business Resource Groups created to connect employees with common interests to promote inclusion, provide perspective and help implement strategies.
• Recognition rewards and awards through the platform Unstoppable Together.
• Access to over 500 discounts, specialty savings and voluntary benefits through Deltaperks such as car and hotel rentals and auto, home, and pet insurance, legal services, and childcare.

• Build Real Skills: Gain hands‐on experience, practical skills, and industry knowledge through meaningful work and targeted learning opportunities.
• Work on Impactful Projects: Contribute to real projects that support business priorities and address real‐world health care challenges.
• Grow Your Network: Connect with leaders, mentors, and fellow interns through networking events and everyday collaboration.
• Learn from Mentors: Receive guidance and feedback from experienced professionals who are invested in your growth.
• Give Back: Participate in community service initiatives and be part of an organization committed to making a difference.
• Support Your Well‐Being: Experience a supportive culture with programs that promote balance and well‐being.
• Launch Your Career: Join an award‐winning, inclusive workplace and explore a future in a growing, evolving industry.

• Assess customer & business needs, perform market research and produce data-based proposals on how to reach desired outcomes.
• Work with customer experience team, business owners, and technical teams to gain alignment on path forward.
• Work across the business to prioritize epics/features, organize product increments, and present on findings and paths forward.
• Present clear and well-defined goals for product increments
• Participate in solution strategy process to ensure that solutions being defined align with incremental goals.
• Work with product and business owners to ensure feature prioritization is representative of the product roadmap.
• Track and manage metrics to measure product performance (e.g. adoption metrics, customer satisfaction, etc.)

• College coursework required towards a degree in technology, design, business or related field.
• Enrollment in Graduate or MBA program preferred.
• 1-3 years work experience in software or healthcare industry preferred.

• Excellent interpersonal skills in areas such as teamwork, facilitation, and negotiation.
• Ability to handle multiple workstreams simultaneously and meet deadlines.
• Ability to create presentations and present to stakeholders.
• Excellent planning, facilitation, and organizational skills.
• Ability to influence technical and non-technical partners.
• Ability to be a product evangelist.
• Interest in and high-level understanding of the product management discipline
• Interest in Agile software development
• Interest in the health care vertical
• Ability to understand the long-term ("big picture") and short-term perspectives of situations.
• Understanding of the software development lifecycle.
• Passionate about customer success and customer results.
• Ability to gather and analyze data from qualitative and quantitative sources.

• $100-$120k annual base salary
• Highly visible role with direct impact on revenue and market share
• Local travel visiting clients and new prospects
• Collaborate with engineering and operations leaders on advanced technologies
• Amazing Benefits, Company culture, Bagels and Lunch on the company every Friday! Amazing tenure as well.
  
  

• Grow and maintain OEM customer relationships
• Identify and pursue new business through research and industry events
• Generate leads, prepare quotes, and close orders
• Deliver technical presentations and negotiate contracts
• Forecast sales and manage CRM reporting
• Partner cross-functionally to align market needs with engineering solutions
  
  

• Bachelor’s degree in a technical or engineering discipline
• Background in OEM or technical sales environments
• Ability to read schematics and present complex technical concepts
• Proficiency in Microsoft Office and CRM platforms
• Authorized to work in the U.S. and able to travel internationally
  
  

We are seeking a highly motivated and experienced Senior Quality Assurance Manager to champion quality, operational efficiency, and excellence at Beyer Graphics in Commack, NY, supporting two sites in New York and New Jersey. This role will lead the development, implementation, and maintenance of a comprehensive Quality Management System and play a pivotal role in fostering a culture of quality, efficiency, and continuous improvement across the organization.

Responsibilities:

• Develop, implement, and manage the site Quality Management System (QMS) that aligns with industry standards and organizational objectives.
• Facilitate quality and continuous improvement initiatives to enhance operational efficiency, customer satisfaction, and overall performance.
• Lead all quality efforts at the plant to ensure that our products consistently meet or exceed defined quality standards and customer expectations.
• Collaborate with cross-functional teams to identify and implement quality improvements, drive process optimization, and achieve cost-effectiveness.
• Ensure timely resolution and closure of Corrective and Preventive Action (CAPA) plans.
• Conduct regular audits and assessments to evaluate the effectiveness of the QMS and processes, identifying areas for improvement.
• Analyze quality performance data and metrics to identify trends, develop insights, and drive data-driven decision-making.
• Establish and monitor key performance indicators (KPIs) to track the effectiveness and efficiency of quality processes and continuous improvement initiatives.
• Ensure site adheres to local regulations and industry standards for pharmaceutical packaging and printing.
• Provide training and mentorship to employees to enhance their understanding of quality principles, practices, and methodologies.
• Oversee supplier quality management, including supplier evaluations and audits, to ensure the quality of incoming materials and components.
• Represent the facility in dealings with external stakeholders related to quality and continuous improvement.
• Assist the Site leadership in driving a culture of quality excellence, continuous improvement, and accountability.
• This role will have supervisory responsibilities over the Quality Department, and it is expected that this individual will have previous experience leading successful teams.
• Other duties as assigned.

Qualifications:

• Bachelor's degree in a related field (e.g., Quality Management, Engineering, Business Administration) is preferred.
• Minimum of 5 years of experience in quality management within the printing, packaging or pharmaceutical industries, with a proven track record of improving quality standards and processes.
• Knowledge of ISO 9001 (Quality Management Systems).
• Prior experience managing direct reports and leading teams to drive quality improvements and standardization efforts.
• Understanding of pharmaceutical industry regulations, including cGMP, FDA, and international quality standards.
• Strong analytical skills with the ability to analyze data, identify trends, and implement effective solutions.
• Excellent communication and interpersonal skills to lead and collaborate with cross-functional teams, direct reports, and stakeholders.
• Proficiency in quality management systems, data analysis tools, and software applications.
• QCBD Software Experience is a plus
• Relevant certifications such as Certified Quality Manager (CQM) or Certified Quality Auditor (CQA) are advantageous.
• Lean Six Sigma certification is a plus

Why work with us? Take a look at all we have to offer!

• Paid Time Off and Paid Holidays
• Comprehensive and Competitive Medical, Dental and Vision coverage
• Company Paid Short-Term Disability Insurance and Life Insurance
• Additional Benefits -- Long-Term Disability, Supplemental Life, Accident and Critical Illness Coverage Plans
• Excellent 401(k) retirement plan with generous company contribution
• We pride ourselves in investing in our employees by offering onsite training and the ability to have unlimited growth
• potential within our organization
• We believe in rewarding our employees with performance-based salary increases

CLICK HERE to watch a video and learn more about us!

Duration: Permanent/Full-time

Client: One of the largest Diesel Engines and Power Generators manufacturers in the US

Overview:

We are looking for an Industrial Machine Repair Technician III who troubleshoots, assembles, installs, tests and maintains mechanical systems using all necessary tools to keep equipment available and capable. Learns and understands the protocols of working safely with electricity and other energy sources with industrial equipment. May work independently and instruct or coach others.

Duties:

• Strengthen equipment reliability by expertly troubleshooting, assembling, installing, and maintaining mechanical systems to keep production running smoothly.
• Elevate workplace safety by proactively identifying hazards, stopping unsafe work, and modeling strict adherence to HSE protocols and PPE requirements.
• Improve environmental stewardship by recognizing how daily tasks affect the environment and consistently acting to reduce negative impact.
• Enhance product quality through meticulous craftsmanship, precise use of technical documentation, and thorough inspections that prevent defects and reduce cost exposure.
• Boost operational performance by executing preventive, corrective, emergency, and predictive maintenance that minimizes downtime and supports production goals.
• Develop team capability by coaching less experienced technicians, sharing knowledge, and serving as a trusted resource for troubleshooting and best practices.
• Drive process improvement by identifying constraints, solving recurring problems, and contributing to continuous improvement and TPM initiatives.
• Strengthen team cohesion by communicating clearly, collaborating across support groups, and actively engaging in training and personal development to support collective success.

Qualifications:

• At least 7 years of experience in a relevant trade field, or A Journeyman Trade Certificate with relevant experience, or A 2-year technical degree in a related field, plus 3 years’ experience working in the Machine Repair/Industrial Electrical field.
• Knowledge of mechanical systems including hydraulics, pneumatics, conveyance systems, CNC equipment, and automation required.
• Responsible for completing machine layouts and machine installations.
• Relevant Experience may include: Controls Engineering, Industrial Automation, Robotics, Residential or Commercial Electrical, Heavy Duty Equipment Maintenance, Welding and Fabrication, Machining, and Farming and Agricultural work, specifically maintenance and repair of equipment etc.

Job ID: 517556

Exempt

National Pipe & Plastics, a CRH company, is one of North America’s largest PVC pipe producers, serving the water and energy markets from two east coast locations in Endicott, NY, and Greensboro, NC. But we’re more than just a manufacturer. Our long history of exceptional customer service and product quality enables us to be a trusted and strategic solutions partner to engineers, contractors, distributors, specifiers, and more. As part of the CRH Infrastructure Products business, we are leading the industry with innovative, sustainable solutions with a safety-first mindset.

Job Summary

The Production Supervisor is responsible for leading a manufacturing production team to work injury-free/incident free in a manufacturing environment. They will provide leadership and direction for their team in a way that motivates them to meet all productivity, safety, and quality goals. They are driven to continually improve performance and embrace changes that will help both their team and company meet production standards. They normally will lead a team of 10-20 team members.

Job Location

This position will be located at our plant in Endicott, NY.

Job Responsibilities

• Ensures a safe workplace is maintained and there is a safety mindset in all things we do
• Follows, and ensures others follow, all policies, standards, and safety requirements defined by the company
• Drives safety excellence through promoting employee involvement, ownership, and accountability to proactively eliminate hazards
• Hires, schedules, and supervises full time staff and additional temporary staff
• Provides coaching and corrective feedback timely as well as administers disciplinary processes up to and including termination, as necessary
• Performs timely quarterly and annual reviews for all team members
• Facilitate team development and growth, employee skill development, problem-solving and resolution
• Oversees all process documentation and training program procedures for consistency of operational tasks, and the safety and cleanliness of the workplace
• Ensures a quality product is being produced and all quality processes are being followed
• Works directly with Quality Control, Engineering, and Maintenance, to improve quality, streamline efficiencies and reduce operating expenses
• Tracks productivity for measured efficiency and improvement and operates at or below the budgeted cost for production utilizing lean manufacturing procedures and cross training
• Oversees adherence to inventory control procedures to ensure inventory accuracy goals are constantly achieved
• Assist with troubleshooting and solving production issues
• Performs other duties as requested by management
• Demonstrated leadership in safety & environmental compliance
• Strong analytical, problem-solving, and critical thinking skills
• Ability to coach, develop and build a strong team of employees
• Strong listening and clear communication skills both written and verbal
• Ability to effectively resolve conflict
• Skilled at working effectively with cross functional teams
• Ability to manage multiple priorities simultaneously
• Demonstrated ability to work in a results-oriented environment

Job Requirements

• Minimum one year of supervisory experience required, manufacturing environment preferred
• High school diploma or equivalent required, college degree preferred
• Proficient in Microsoft Office including Word and Excel
• Ability to perform basic mathematical skills such as calculating percentages and volumes

Job Compensation/Benefits

• The annual salary is $70,000-85,000
• $2500 sign on bonus
• Annual bonus opportunity of 5%
• 401(k) plan / group retirement savings program
• Short-term and long-term disability benefits
• Life insurance
• Health, dental, and vision insurance
• Paid time off
• Paid holidays

What CRH Offers You

• Highly competitive base pay
• Comprehensive medical, dental and disability benefits programs
• Group retirement savings program
• Health and wellness programs
• An inclusive culture that values opportunity for growth, development, and internal promotion

About CRH

CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization.

If you’re up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest!

Oldcastle Infrastructure, a CRH Company, is an Affirmative Action and Equal Opportunity Employer.

EOE/Vet/Disability

• CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.

GENERAL RESPONSIBILITIES:

The Senior Quality Engineer is responsible for overall product quality and compliance with ISO 9001 standards. This role will be responsible for developing and maintaining the Quality Management System and leading quality assurance activities throughout the product lifecycle

SPECIFIC RESPONSIBILITIES:

• Develop, implement and maintain the Quality Management System (QMS) in accordance with ISO 9001 standards.
• Ensure continuous improvement of the QMS through regular audits, reviews, and updates.
• Lead quality assurance activities throughout the product lifecycle, from design to manufacturing and post-production.
• Establish and monitor quality metrics and KPIs to assess product quality and performance.
• Identify areas for improvement in manufacturing processes and lead continuous improvement initiatives.
• Implement corrective actions (CAPA) based on root cause analysis.
• Prepare and maintain quality documentation, including inspection plans, work instructions, and standard operating procedures (SOPs).
• Collaborate with engineering, manufacturing, and supply chain personnel to implement product changes for current and next generation products. Maintain documents at various product stages ranging from the creation of part numbers to the release of products for manufacturing.
• Ensure compliance with applicable regulations, industry standards, and customer requirements.
• Review and maintain product manuals and labeling in coordination with Engineering, Sales, and Safety Agencies.
• Conduct training sessions for manufacturing personnel on quality standards, processes, and best practices.
• Act as the customer interface on quality-related issues, providing timely resolutions and maintaining strong relationships.
• Gather customer feedback to drive product improvement and quality improvements.

QUALIFICATIONS:

• Bachelor’s degree in Electrical Engineering, Industrial Engineering, Quality Engineering, Manufacturing Engineering, or a related field.
• At least 5+ years of experience in quality engineering or a similar role in a manufacturing environment.
• Certification as an ISO 9001 Lead Auditor or similar quality management certification is preferred.
• Strong knowledge of general manufacturing, quality control, and lean principles.
• Skilled in MS Word and Excel.
• Experience with SAP preferred.
• Must be detail oriented and organized in reviewing information, identifying issues, evaluating options and proposing solutions.
• Clear and organized written and verbal communication.

Title: Controls Engineer

Location: Tonawanda, NY (Onsite)

Duration: 12+ Months Contract

Overview

Key Responsibilities

Production & Floor Support

Provide daily hands‑on technical support for engine assembly lines.

Troubleshoot issues with PLCs, robotics, HMIs, vision systems, instrumentation, and automation equipment.

Respond quickly to equipment downtime and root-cause issues impacting production.

Work closely with production, quality, maintenance, and engineering groups to prioritize issues.

Machine Controls & Automation

Program, modify, and troubleshoot:

Siemens PLC systems

Rockwell / Allen-Bradley Global Common platforms

HMI systems

Fanuc robots and cobots

Support automation equipment from Hirata (Japan) and other vendors.

Vision Systems & Sensors

Configure and troubleshoot:

Cognex AI vision systems

Dalsa

Matrox camera systems

Equipment Launch & Implementation

Support installation and commissioning of new Gen6 Small Block Internal Gas Engine assembly equipment.

Assist with procurement, integration, testing, and validation of automated systems.

Document changes, support PFMEAs, and maintain standard work.

AMR / Material Handling Systems

Support Autonomous Mobile Robots (AMR) such as:

OTTO

Bastian Auto Fork Truck

Meetings & Communication

Participate in:

Morning carryover meeting

Smaller team stand-ups

End-of-shift review meetings

Review cross‑shift communication logs and email updates.

Communicate top priorities, risks, and production support needs daily.

Required Qualifications

Education

Associate Degree required

Bachelor’s Degree preferred (Electrical Engineering strongly preferred)

Experience 5–7 years’ experience in manufacturing, automation, or controls.

Will consider less experienced candidates with strong aptitude and learning ability.

Must-Have Hard Skills

Extensive manufacturing plant floor experience

On feet all day, fast-paced environment, high urgency, hands-on troubleshooting

Machine controls experience

PLCs, robotics, test systems, HMIs, instrumentation, and vision systems

Robotics / Automation system experience

Fanuc robots/cobots, cameras, AMRs, etc.

Preferred Technical Skills

(Not required but highly beneficial)

Siemens PLC

Rockwell/Allen‑Bradley

Cognex AI Vision

Dalsa / Matrox cameras

Fanuc Robot/Cobot programming

OTTO AMR, Bastian autonomous forklift

Experience in engine assembly or automated assembly lines

Soft Skills & Traits

Team player with strong communication skills

High energy, flexible, positive attitude

Quick learner with strong mechanical/electrical aptitude

Able to think on their feet in a dynamic environment

Comfortable with large manufacturing operations

Work Environment

Fast-paced engine assembly plant

Mix of older equipment (10+ years) and brand‑new automation

Highly collaborative with a 12-person engineering team

Support production, quality, maintenance, and cross-functional groups

Craft is the AI sales engine for the trillion-dollar home services industry. Our AI analyzes every customer interaction across the customer journey and uses that rich context to create differentiated agents that book new appointments, sell new opportunities, and expand existing customer bases.

We've signed some of the largest enterprises and PE consolidators in the space without a dedicated sales team. Without external funding. Profitably. Now we're looking for someone to accelerate what's already working.

• Own the full sales cycle — from prospecting to signed contract
• Close enterprise deals with VP/C-level buyers at PE consolidators and large regionals
• Build pipeline through outbound, events, and referrals
• Expand existing accounts — our customers love us, help them buy more
• Build the sales playbook to get us to $10M ARR

• Proven ability to source and close 5-6 figure deals
• High agency and grit. You've done hard things.
• Strong communicator who can hold their own with skeptical executives
• Extremely competitive. You've been the top performer somewhere.

• Sold to sales leaders or operations executives
• Experience in trades or home services industry
• Worked with PE-backed companies

• Shape GTM at a category-defining AI company in an industry that's powering the backbone of America
• Customers are renewing, expanding, and referring — you're pushing on an open door
• Competitive base + uncapped commission + generous equity (we're profitable, not VC-backed)
• Work directly with our founders and accelerate your career. Path to Head of Revenue.

• $150K - $250K+ OTE + meaningful equity
• Full medical, dental, vision
• Unlimited PTO

Job Title: Planner

Location: Hauppauge, NY

Zip Code: 11788

Start Date: Right Away

Pay Rate: $32.83 - $41.04/hr

Shift: 1st Shift, M-F. 8.5 hour day with .5 for lunch

Keywords: #HauppaugeJobs; #HauppaugeJobs;

Benefits:

* Medical / Health Benefits with multiple plan options, Flexible Spending Accounts, Dental and Vision

* 401k

* On the job training / cross-training

* Life Insurance, disability insurance

* Voluntary life insurance for family members available.

* Accident and critical illness insurance optional.

* Scheduled performance reviews

* Referral program

SUMMARY:

Ensures performance to the master production schedule to achieve division objectives for customer service, inventory levels, and configuration management. Plans, prepares, issues, and controls basic production schedules and material requirements to ensure a controlled flow of approved materials timed to meet production requirements.

ESSENTIAL FUNCTIONS:

* Identifies common raw material and component requirements for production from engineering and production specifications. Ensures accurate item master schedules and bill of materials.

* Advises management of the status of work in progress, material availability, and potential production problems to ensure that personnel, equipment, materials, and services are provided as needed.

* Confirms materials supply is available to meet demand. Prepares work orders or purchase requests for the production or purchase of components or parts to support master production schedule, shop load, and inventory requirements. Coordinates material movements between internal work and storage areas and/or outside processing or suppliers to ensure materials are available when needed.

* Schedules and expedites the movement of parts by means of move orders and/or stock transfers to meet customer shipping dates. Projects hardware availability for assembly build schedule update and development of monthly sales plan objectives.

* Analyzes inventory usage, scrap, and waste, and identifies and quantifies potential problems and causes that would impact the ability to achieve inventory level objectives.

* Advises and assists management in resolving problems concerning over shipments, shortages, engineering changes, and cancellation of orders. Monitors component shortage status. May prepare detailed layouts of component shortage requirements on assigned programs over three-month horizon.

* Maintains configuration control on all open orders and appropriate data files as required by division policies and procedures.

* Coordinates cross-functional activities with Quality Assurance, Manufacturing, Purchasing, Engineering, Inventory Control, Shipping/Receiving, and Contract Administration to ensure a smooth flow of materials through the production process and consistent information regarding status and priorities.

* Recommends changes to improve product or process efficiency and/or reduce cost using continuous improvement principles.

* Maintains professional and technical knowledge by attending educational workshops, reviewing technical and/or trade publications, establishing networks, and/or participating in professional associations.

* Complies with federal, state, and aerospace industry regulations; ensures adherence to requirements and advises management on needed actions. Complies with policies and procedures in Government/Commercial Practices Manual (GPM/CPM).

* Contributes to team effort by accomplishing related results as needed. Work assignments may include cross-functional or project team responsibilities (e.g., continuous improvement).

QUALIFICATIONS:

* Professional entry level position. Bachelor"s degree in business administration or a related field; may be actively pursuing and is currently studying upper-division core curriculum courses; OR has passed the CPIM national certification basics exam and is committed to achieving the CPIM national certification; OR has completed a certification program in production and inventory control.

* Knowledge of general manufacturing and business operations and key manufacturing resources planning theories and principles including continuous improvement methods (e.g., pull systems, process mapping, JIT).

* General knowledge of legal and regulatory requirements related to production control.

* General knowledge of manufacturing resource planning systems and standard business application software.

* Ability to research and analyze data and develop recommendations or resolve problems by drawing on internal information and referring to prior decisions.

* Ability to work with only general work direction and instructions regarding the scope of assignments and determine priority and order of assignments.

* Ability to read, analyze, and interpret financial reports and policies.

* Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community.

* Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to effectively demonstrate team member competencies and participate in goal setting, performance feedback, and self-development activities.

WHAT YOU WILL BE DOING

Develop, document, and maintain manufacturing processes for aerospace and industrial components in a high-mix, low-volume manufacturing environment, with a focus on continuous improvement throughout the process.

Manufacturing/Test Engineers are responsible for cultivating and driving company-wide productivity initiatives, regularly maintaining a healthy pipeline of continuous-improvement ideas, and assisting in developing an effective site strategy and plan. This position supports the assembly and test areas by implementing effective processes, programs, instructions, etc. Additional duties and responsibilities may be required based on organizational needs.

Maximize Productivity

• Continuously drive the development and implementation of productivity projects supporting the strategic direction of the business unit.
• Contribute to the productivity project funnel to achieve annual goals, report progress to team members, and management.
• Drive $400,000 of cost savings a year.
• Lead the team to develop and track relevant operations metrics with the goal of continuous improvement.

Process Automation

• Utilize LabVIEW, PLC programming, robotics, and emerging automation technology to develop automated and semi-automated processes for the assembly and test of aerospace products.
• Collaborate with Design Engineering and Manufacturing Engineering to develop tooling and fixtures in support of improved process efficiency.

Support New Business efforts

• Work with Purchasing and Design Engineering to provide cost estimates and advise on manufacturability for new business opportunities.
• Work with Design Engineering to develop and review Acceptance Test Procedures for new business programs.

Support Ongoing Production

• Develop and document methods and processes for manufactured parts and assemblies through routings, operation sketches, tool sheets, set-up information, and assembly instructions.
• Using lean strategies and methodologies, improve upon inefficient processes, eliminate single-point failure areas, and implement process automation initiatives.
• Work with the Supply Chain and Operations teams to influence site strategy, planning, and execution.
• CNC tooling and fixture design, assembly, and test fixture design.
• Day-to-day support for production operations.

WHAT IS NEEDED FOR THIS ROLE

• Candidates for this role must be a US Person (under export regulations): US Citizens, a refugee/asylee, or a Green Card holder.
• Bachelor’s Degree in an Engineering or Technical discipline and 5+ years’ experience.
• Proficient with CAD Software (Autodesk Inventor preferred).
• Experience in robust fixture and tooling design.
• Proficient in programming (LabVIEW preferred).
• Lean Six Sigma project experience.
• Continuous Improvement.
• Geometric Dimensioning and Tolerancing.
• Automation.
• Product Assembly (hydraulic, electro-hydraulic, and pneumatic components preferred).
• Hydraulic, electro-hydraulic, and pneumatic valve testing.
• Mechanical Troubleshooting.
• Technical Writing (Work Instructions, Policies, and Procedures).
• Good interpersonal communication skills and a team player, ability to direct the work of others.
• Ability to promote and maintain manufacturing process standardization.
• Ability to manage and prioritize multiple projects.

Physical Demands

Individuals may need to sit or stand as needed. May require walking primarily on a level surface for periodic periods throughout the day. Reaching above shoulder heights, below the waist or lifting as required to file documents or store materials throughout the workday. Proper lifting techniques required. May include lifting up to 10 pounds for files and computer printouts on occasion. The performance of this position may occasionally require exposure to the manufacturing areas, where, under certain conditions, the use of personal protective equipment, such as safety glasses with side shields and mandatory hearing protection, is required. Primary environment: ambient room temperatures, lighting, and traditional office equipment as found in a typical office environment.

Borealis Enterprises, LLC is seeking a Federal Construction Quality Control Manager (QCM) in Niagara, New York. The Quality Control Manager shall oversee and coordinate the planning, implementation, and supervision of the project quality control plan, including employees and outside agencies or consultants involved in inspections and testing.

Borealis Enterprises, LLC is an entity of NTVI Federal, Inc, a federal contractor engaged in construction, professional services, facility management and telecommunications, with its corporate office in Chantilly, Virginia.

Key Responsibilities (including but are not limited to):

• The Quality Control Manager (QCM) will assure, to the best of their abilities, that all materials, workmanship and construction are in full compliance with the contract, plans and specifications, and all applicable building codes.
• The QCM will conduct business in a professional and ethical manner and integrate well into the project team. The QCM is authorized to require that defective work or material be corrected or removed until made compliant.
• Submittal review and approval shall be the responsibility of the QCM including recommendations for variations, value engineering, and betterments.
• The QCM shall perform inspections as needed and shall prepare and maintain inspection and performance records daily.
• Preparatory meetings shall be held with subcontractors and all parties concerned as needed to define QC and safety policies and procedures with each newly definable feature of work.
• The QCM will also maintain current certifications for First Aid, CPR and OSHA.

Position Requirements:

• Engineering Degree Required (Civil Engineering degree preferred)
• 2+ years of field experience in the role of Quality Control Assistant Manager or 5-10 years of acceptable construction related experience – Superintendent or Assistant Project Manager or similar.
• Possess a current CQM certification
• CPR Certification Required
• Completion of OSHA 30-Hour Safety Course
• Proven competency and proficiency of position’s essential job functions, duties, and responsibilities.
• Broad-based project and management skills to lead and effectively communicate with people both internal and external to the company.
• Project experience in the $1 million to $10 million range including multi-story buildings, site work, grading, and site utilities
• Proficiency in PC-based programs including Microsoft Office, scheduling software, etc.
• Experience with Government/Military projects
• The QCM may spend part of their time at noisy production sites. In some areas, you may have to wear protective clothing or goggles. Some travel may be required.

Send your resume to

Company History

The origins of Prym date back to 1530, making it one of the oldest family-owned industrial companies in the world. Founded by Wilhelm Prym as a goldsmith in Aachen, the company has shown remarkable resilience and adaptability throughout its nearly five-century history. In the mid-17th century, Prym relocated to Stolberg and shifted its focus to brass production. As demand for brass products declined, the company pivoted to machine production of metal haberdashery, establishing itself as a leader in this field.

A significant milestone in Prym's history occurred in 1903 when Hans F. Prym developed the innovative s-spring press fastener, which revolutionized fastening solutions. This invention, produced in countless colors and shapes, has solidified Prym's reputation for quality and reliability, showcasing the company’s commitment to innovation.

Today, Prym thrives with over 3,500 employees across 30 locations in 18 countries and 9 production sites. Under the William Prym Holding, four independent divisions operate globally, each catering to distinct market needs. Prym Consumer is the first choice for textile handicraft, Prym Fashion serves the fashion industry with exceptional customer service and tailored solutions, Prym Intimates offers innovative accessory solutions for lingerie, swimwear, and athleisure, while Inovan Prym specializes in unique engineering for metal and hybrid processing. As a majority-owned family business, Prym remains dedicated to its founding values while embracing the dynamic needs of its customers, playing a vital role in shaping the future of crafting and textile innovation.

Summary/Objective

The Account Executive drives strategic, profitable, long-term growth for existing customers, while building intentional sales development plans for acquiring new business.

Essential Functions

• Lead all aspects of sales for designated accounts with responsibility for growth and development of the business. Responsible for achieving sales revenue and profitability for Prym Fashion America accounts.
• Develop and execute sales strategies by account to foster and grow business. Focus on acquiring new customer targets while nurturing strong relationships with current business partners.
• Proactively manage business opportunities with individual customers to set Prym apart from our competitors.
• Manage own costing strategies to align with team margin goals.
• Collaborate with internal global team members in sales, customer service, finance, and product development.
• Translate market trends and customer needs into measurable goals that build competitive advantage.
• Self-motivated: Ability to take initiative and solve problems with the tools available.
• Product Curiosity – deeply interested in product and interested in learning new categories.
• Act as a team player and change agent.
• Model the Group’s code of conduct and values.
• Other duties as assigned

Required Education and Experience

• Bachelor’s Degree in Fashion, Marketing, Business Administration, or other related degree
• 5-8 years’ experience in the Fashion industry or a related field
• Must be proficient in MS Office products including Word, Excel and PowerPoint, SharePoint and Microsoft Teams
• Proven success in cross-regional projects or initiatives.
• Sophisticated business and financial acuity needed.
• Practical experience in researching new opportunities and implementing successful account penetration.
• Excellent oral, written communication, and presentation skills.
• Strong organizational skills-able to focus, prioritize and follow through.

Preferred Education and Experience

• Experience working within Fashion segments
• In-depth knowledge of the Fashion Industry and understanding of market trends.

Supervisory Responsibility

This position has no supervisory function.

Career Path Progression from this position

Sr. Sales Manager

Travel

This position requires up to 20% travel – mostly regionally in NY and/or domestic.

Work Environment or Working Conditions

This job operates in a combination of professional office and basement environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, and filing cabinets.

Other Duties

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Physical Demands

• Ability to lift 5 – 20 lbs. periodically and 50 lbs. on occasion
• Ability to stand/walk for up to 8 hours
• Ability to sit for up to 8 hours

EEO Statement

EOE/Vet/Disabled

As a Quality Manager you will provide leadership as well as the tools to continuously improve quality. Functions as a change agent in moving quality process & initiatives forward. Establishes, manages and implements quality initiatives, systems & measures by driving the continued development of a quality culture.

Job Responsibilities

1. Develops effective quality measurements and reports results to leadership team and others across division at multiple locations both domestic and/or international;
2. Sets direction and measures effectiveness of implemented systems
3. Coordinates and executes quality duties across the location: quality improvements; leads warranty reduction project teams; system improvements; best practices quality initiatives; and training
4. Manages quality system policies and procedures by administering and coordinating quality policies and practices designed to improve quality & reduce costs
5. Coordinates the quality management system certification process
6. Represents Briggs & Stratton’s quality interests for the location with suppliers and customers; participates in customer feedback gathering and focuses to improve customer satisfaction
7. Performs full range of managerial responsibilities which may include but not be limited to: interviewing, hiring, coaching and developing employees; planning, assigning and directing work; EEO/AA; performance management; department budget
8. Performs other duties as assigned

Job Skills Requirements

• Thorough knowledge of quality practices and procedures including Quality Management System (QMS) and ISO requirements
• Excellent written, verbal, interpersonal and team oriented communication skills to effectively work with diverse groups of people
• Demonstrated success implementing large-scale improvements in complex and diverse environments both domestic and/or international
• Demonstrated project management and effective facilitation skills
• Comprehensive technical knowledge and background of quality and manufacturing processes
• Ability to exercise considerable judgment in guiding quality team in solving practical problems with a variety of concrete variables in situations where there may/may not be standardization
• Excellent planning, organizational, problem solving and decision making skills
• Fluent in English and primary language used in area of responsibility and/or location
• Bachelor's Degree in Engineering or related field
• Bachelors Degree in engineering or related field
• Seven years of quality or related professional experience
• Prior leadership and management experience
• Travel up to 25%

Briggs and Stratton

• For this position, the expected base annual salary range is $110K-150K commensurate with experience. Actual compensation within that range will be dependent upon the individual's skills, experience, qualifications, and applicable laws.

Briggs & Stratton, headquartered in Milwaukee, Wisconsin, provides innovative products and diverse power solutions to help people get work done. Briggs & Stratton is the world’s largest producer of engines for outdoor power equipment, and is a leading designer, manufacturer and marketer of lithium-ion battery, standby generator, energy storage system, lawn and turf care products through its Briggs & Stratton®, Vanguard®, Ferris®, Billy Goat®, and Branco® brands. Briggs & Stratton products are designed, manufactured, marketed and serviced in more than 100 countries on six continents.

Briggs & Stratton is committed to a policy of equal employment opportunity. The Company conducts all employment practices without regard to race, sex, color, religion, national origin, age, disability, protected veteran's status, pregnancy, genetic information, sexual orientation or any other basis prohibited by law. Briggs & Stratton also undertakes affirmative action to assure equal employment opportunity for minorities and women, for persons with disabilities, and for protected veterans

Briggs & Stratton, headquartered in Milwaukee, Wisconsin, provides innovative products and diverse power solutions to help people get work done. Briggs & Stratton is the world’s largest producer of engines for outdoor power equipment, and is a leading designer, manufacturer and marketer of lithium-ion battery, standby generator, energy storage system, lawn and turf care products through its Briggs & Stratton®, Vanguard®, Ferris®, Billy Goat®, and Branco® brands. Briggs & Stratton products are designed, manufactured, marketed and serviced in more than 100 countries on six continents.

Job Title: Service Operations Manager

Job Type: Full-time

Location: Hawthorne, NY (Hybrid)

Who Are We

Leviant deploys UV-C sanitization technology inside hospitals and hotels. Every device in the field represents a commitment to cleaner, safer environments. This role exists to keep that promise. A cleaner hospital is a safer hospital.

We move fast, hold ourselves to a high standard, and expect the same from the people around us. If you thrive with real responsibility, take pride in closing loops, and have a low tolerance for vague processes or dropped balls — read on.

The Role

This is a high-accountability, high-visibility role at the center of Leviant’s field operations. You will manage the full lifecycle of service requests — intake, triage, technician dispatch, parts coordination, documentation, invoicing, and closure.

Every service event contains valuable data. Recurring failures, error codes, and technician visits reveal insights about device performance. Your job is to capture those signals and translate them into improvements for product, service, and operations.

This role also includes time in the field. You will visit customer sites, shadow technicians, and speak with EVS teams and facility managers to understand how devices perform in real environments.

What You’ll Own

Service Intake & Triage

·  Serve as the first point of contact for service requests

·  Assess urgency and determine the fastest path to resolution

·  Provide remote troubleshooting and escalate when needed

Technician Dispatch & Coordination

·  Match service needs with the right technician and parts

·  Coordinate scheduling and maintain clear communication with customers

·  Ensure work is completed to Leviant standards

Parts & Inventory Management

·  Track repair and consumable inventory

·  Coordinate shipments so technicians arrive prepared

Salesforce & Documentation

·  Maintain accurate service records

·  Build a historical record for each device and customer site

·  Track personnel changes at customer locations

Invoicing & Financial Accuracy

·  Ensure work orders are complete and invoiced promptly

·  Maintain financial accuracy across service operations

Continuous Improvement

·  Lead weekly service reviews

·  Identify patterns in field issues and communicate insights to engineering

·  Improve internal service workflows

Field Presence

·  Conduct site visits to observe device performance

·  Build relationships with EVS teams and facility managers

·  Bring field insights back to improve product and service quality

What We Require

·  Relentless follow-through and ownership

·  Strong organizational ability

·  Fluency with CRM systems and productivity tools

·  AI-forward mindset to improve workflows

·  Clear professional communication

·  Adaptability in hospital environments

·  Strong collaboration across teams

Preferred Qualifications

·  Experience in service operations or field coordination

·  Experience managing technicians or service logistics

·  Familiarity with inventory management and invoicing

·  Experience with Salesforce or similar CRM platforms

·  Experience implementing AI tools in workflows

·  Healthcare, facilities, or hospitality operations experience

·  Second language (Spanish, Russian, or French)

Leviant is an equal opportunity employer. We evaluate candidates based on ability, character, and drive.

Part of the Interparfums group founded in 1982, Interparfums USA develops, manufactures and distributes prestige perfumes and cosmetics as the exclusive worldwide licensee for Abercrombie & Fitch, Anna Sui, Donna Karan, DKNY, Graff, GUESS, Hollister, MCM, Oscar de la Renta, Roberto Cavalli, Salvatore Ferragamo and Ungaro. Through its global distribution network, the Company’s products are sold in over 120 countries.

The Senior Manager – Material Planning is a key role within the Planning Team, responsible for overseeing the planning of short- and long-term product requirements in support of the Master Production Schedule. This role evaluates inventory levels and demand across multiple domestic and international locations, balancing requirements and financial considerations to align with company objectives. The Senior Manager also partners closely with suppliers and cross-functional teams to ensure timely and accurate receipt of inventory, while effectively managing excess and obsolescent materials, and provides leadership and guidance to two direct reports.

This position is based in office from Mondays-Thursdays, and remote on Fridays.

Responsibilities:

• Own purchasing of materials using the Material Replenishment Planning as needed for production and in accordance with supply parameters
• Determine and maintain supply parameters such as lead times and Minimum Order Quantities to ensure efficient outputs
• Management of component versions to ensure accurate work orders and stock usage
• Confirm material availability to create production orders that support service objectives, inclusive of required stock transfers
• Utilize capacity planning, economic order quantity evaluation to ensure a smoother supply chain
• Review material shortages preventing order conversion and follow up with appropriate suppliers to expedite deliveries
• Manage exceptions and deviations from the plan as needed by advancing or adjusting supplier orders
• Track and maintain purchase orders to always ensure accuracy
• Engage in efforts that support inventory reconciliation and evaluation of inventory health
• Communicate material supply issues to Supply Planning
• Participation in the coordination of engineering changes, product line extensions or new product launches to ensure timely transitions in material and production flow
• Achieve in-stock and inventory goals
• Approve supplier purchase orders in accordance with company targets and guidelines
• Oversee movement of material within location network
• Lead supply chain projects and initiatives that will enhance planning and inventory process and results
• Supervise, mentor and coach direct reports (Coordinator, Planner or Manager-level)
• Recognize opportunities and take initiative to develop or redevelop processes accordingly

Education/Experience

• Bachelor’s degree in Supply Chain Management, Business Administration, or related field
• 5+ years of experience within material/component planning and supply chain
• 1+ years of experience managing direct reports
• Prior working experience within the Beauty or CPG industry required

Required Skills

• Fundamental knowledge of Supply Chain (Plan, Source, Make, Deliver), the integration of organization, system, and process enterprise wide, and the importance of Master Data in the overall effectiveness and operation of the Supply Chain
• Strong technical (MRP, Office, Outlook, etc.) and interpersonal communication skills
• The ability to work independently with strong decision-making and problem-solving skills
• Excellent communication skills, including written, verbal, and presentation; comfortable and credible with both internal and external partners
• Self-starter who will thrive in fast-paced, dynamic environment
• Possess a strong sense of urgency and ability to multi-task and pivot

We Offer:

• The salary range for this position is $125,000 – $150,000 annually, commensurable with skills, experience, and qualifications
• Bonus opportunity based on personal and business performance
• Robust healthcare, insurance, and benefit options
• Paid time off policies including vacation, personal, holiday, and sick days
• 401K plus company match
• Options to support development, including complimentary access to LinkedIn Learning
• An entrepreneurial career with a dynamic environment where all voices are heard and appreciated
• Low hierarchy with high visibility to C-Suite on a regular basis
• A growing company with a proven track record of solid financial stability

Interparfums USA, LLC is an Equal Opportunity Employer and is committed to providing fair and equitable employment opportunities in compliance with all applicable federal, state, and local laws.