Engineering Jobs in North Reading, MA

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Principal Product Engineer will learn the technical aspect of key product in the Andover, MA factory.  The Product Engineer will be product centric technical liaison, focused on driving collaboration across work centers and all disciplines to resolve technical issues, improve efficiencies and optimize overall product yield to ensure high-quality and cost-effective products and systems. You will utilize data analysis, CORE methodologies, and technical understanding to maximize overall product test yield, efficiency, and value.

What You Will Do

• Address major yield and technical issues highlighted by tech leads and factory operation managers.

• Perform data analysis and provide direction for overall product yield and performance improvement.

• Facilitate collaboration across manufacturing work centers and design engineering.

• Empower production test engineer to resolve complex failures through data driven troubleshooting technique.

• Establish technical understanding of the product architecture, subassemblies, and test requirement.

• Partner with test and design engineering team to develop sustaining solution to technical problems with root cause and corrective action identification.  

• Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment.

Qualifications You Must Have  

• Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and typically a minimum 8 years of relevant experience

• 4+ years in Production testing/troubleshooting

• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer

• Preferred majors: Electrical Engineering, Computer Science/Engineering Technology

• The ability to interpret and analyzer RF parametric data

• Experience with lean principles in a manufacturing environment

• Current DOD Secret Security Clearance

• Excellent communication skills (written and verbal) and presentation skills

• Good interpersonal skills to manage tasks that bridge operations, production control, engineering, supply chain, and customer relations

• Experience applying technical principles in the manufacturing life cycle

• Experience with Quality Systems and their application

• Shop Floor Management

• Strong engineering aptitude and analytical skills

• Technical problem solving

• Customer and company oriented and driven to meet or exceed expectations

• Ability to work cohesively in a team environment

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation assistance is not available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

• Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Systems Engineering, Integrated Systems Department is seeking a Systems Engineering Technical Lead for the NASAMS product line. This role requires strong technical expertise and engineering leadership skills to drive the design and development of world-class air and missile defense systems.

The Integrated Systems Department supports Raytheon by providing world-class weapon systems engineering. Domain expertise includes radar systems, effector systems, battle management, command and control, network design, battlespace integration, and interoperability for both domestic and international customers.

You will work alongside motivated engineers who are responsible for conducting systems engineering studies and trades; supporting system requirements definition and analysis; and contributing to algorithm development, integration, test, and evaluation.

What You Will Do

• Provide technical oversight and management for a variety of Systems Engineering efforts

• Concept and requirements development (including decomposition and flowdown) within a mature product-line

• Concept of Operations (CONOPS) development and design

• Algorithm optimization and development

• Multi-disciplinary development efforts across the kill-chain for an Air and Missile Defense System

• Collaboration with customer to bring new capabilities to the warfighter

• Functional analysis of real world and test data; trade studies to bring advanced features to fielded system

• Support and lead Internal and External Program and Design Reviews

• Collaborate with other IPT/CPT leads from the various functions and products

• Support and lead Internal Research and Development for future capability upgrades

• System integration and test support, including live fire test events

• Periods of travel up to 25% of time both domestically and internationally

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience

• Experience with Air Defense Systems in systems engineering roles supporting development or production

• Experience with managing budget, scope and/or earned value

Qualifications We Prefer

• Experience interfacing with external customers and industry partners

• Excellent communication skills, written and verbal, with a variety of audiences

• Self-motivated, passionate leader

• 5+ years of experience in Air Defense Systems, Systems Engineering production or development

• Existing DoD Security Clearance

• Knowledge of Air Defense systems (examples – Patriot and NASAMS Systems)

• Experience managing competing programmatic priorities

• Experience making challenging technical decisions

• Familiarity with the Raytheon Integrated Product Development System (IPDS) or equivalent

• Experience with Earned Value Management (EVM) (plus, experience with Raytheon execution of EVM)

• Advanced degree in EE, CE, Physics, Math, ME, Aerospace\

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation assistance is available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Atlas is a nationwide leader in civil engineering, materials testing and geotechnical consulting services for environmental, industrial and infrastructure construction projects. Headquartered in Denver, CO, Atlas currently has over 3,500 employees with offices throughout the US, including Alaska & Hawaii. It’s no accident that Atlas creates a better experience for infrastructure and environmental projects. It’s how we are built – with the best people in the industry, with the reach and expertise to help at any and every step of the project, and with a heart-led approach that puts quality and safety at the center of everything we do. We’re just built to be better. We are a great company.

We are seeking an Environmental Project Manager to join our Woburn, MA or Manchester, NH teams! Come join us!

Job responsibilities include but are not limited to:

• Managing and prepare all phases and associated Massachusetts Contingency Plan milestone documents as well as NH Contaminated Site Management and/or Maine Petroleum and Hazardous Waste Cleanup regulations.
• Designing and overseeing site assessments.
• Mentoring junior staff.
• Procuring and managing subcontractors.
• Strong time and task-management skills
• Supporting other Atlas services lines commensurate with skills: Building Sciences, Regulatory Compliance, SPCC Plan preparation, NPDES Services, and/or Industrial Hygiene
• Supporting business development and proposal efforts.
• Technical support for Atlas 24/7 Emergency Response efforts

Minimum requirements:

• Bachelor of Science degree in Geology, Environmental science, Engineering or similar field of study
• 5-10+ years of professional experience
• Thorough knowledge of Massachusetts Contingency Plan
• Strong technical writing skills. Must be able to prepare reports independently and with limited direction.
• Strong project management skills
• Valid driver's license

Technical requirements:

• Knowledge and understanding of the Massachusetts Contingency Plan, developing compliance programs and preparing milestone reports.
• Developing and implementing subsurface and groundwater site assessment program
• Current OSHA HAZWOPER Certification
• Proficient with Microsoft Office (Word, Excel, PowerPoint, etc.)
• Proficient with PDF software
• Knowledge of Teams/OneDrive/SharePoint
• Fill Environmental Professional role for ASTM Phase I Environmental Site Assessment reports

Other miscellaneous qualities:

• Tracking to obtain Licensed Site Professional License's
• Ability to travel within New England up to 20% of the time
• Participate in Emergency Response technical support program, including periodic evening and weekend response support
• Ability to travel within New England up to 20% of the time
• Risk Assessment, Site Assessment, Fate and Transport, and/or remediation design expertise a plus.
• Strong understanding of environmental field practices; environmental media sampling, soil and groundwater investigation, remediation oversight.

Compensation:

$80,000 - $105,000 per year.

The expected salary range for the position is displayed in accordance with the state’s law. Final agreed upon compensation is based upon individual qualifications and experience.

Benefits:

Atlas offers a comprehensive benefit program to meet the diverse needs of our employees. Depending on your employment status, Atlas benefits include health, dental, vision, life, AD&D, voluntary life / AD&D, disability benefits, leaves of absence, 401k, paid time off, paid holidays, employee assistance program, educational assistance program.

Who We Are:

We strive to be the most sought-after infrastructure and environmental solutions company, known for our unique, values-driven approach and brought to life by the industry’s most exceptional people.

Atlas provides professional testing, inspection, engineering, environmental and consulting services from more than 100 locations nationwide. We deliver solutions to both public and private sector clients in the transportation, commercial, water, government, education and industrial markets.

With a legacy of providing consistent quality and results, Atlas creates a better experience at every stage of an infrastructure project. We connect the best experts in the industry to deliver value from concept to completion and beyond. This means doing everything our clients expect and then raising the expectations in a way that only our people can.

Our Values:

Life: We enhance quality of life. We value people and safety above all else.

Heart: As our hallmarks, we act with compassion, empathy and respect.

Trust: We work together as partners, doing what we say with full accountability.

Mastery: Always striving for the highest quality, we ensure greatness inspires all our work.

Atlas EEOC Statement

Atlas is an equal opportunity employer. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Atlas makes hiring decisions based solely on qualifications, merit, and business needs at the time. For more information, read through our EEO Policy

On-site Burlington, Massachusetts

Ongoing contract on a W-2

We are looking for a Field Engineer that ideally has previous linear water rehabilitation experience i.e. sewers. This will be an onsite role for a sewer rehabilitation project for a utility client in Boston. They will be providing Owner's rep services and be reviewing drawings, RFI's, etc. to provide technical support out in the field to the main contractors out in the field. This person will coordinate back with the design engineer office to determine if changes need to be made.

Provide subcontractors with information and direction, as outlined within contract specifications, to allow the work to proceed as scheduled. Authority to interpret technical requirements and provide solutions in conjunction with discipline Project Department Engineer and Discipline Superintendent, to provide drawings and data, and to direct work as assigned and consistent with Company's contractual commitments. May perform subcontract administration of discipline specific or assigned procurements. Interprets and administers fundamental commercial issues. Position may transition to assistant superintendent or startup engineering role. May perform in an EPC environment where Company is either solely responsible or in a Joint Venture/Consortium with others. Provides technical direction/interpretation of design drawings and specification requirements, as well as general guidance to subcontractors on overall design. May perform fundamental design checks and re-design in the field without supervision. Provides commercial direction, interpretation of subcontracts, and administers discipline specific or assigned contract requirements in coordination with Field. Subcontract Administrator or Procurement Manager. Reviews, maintains records, and responds to Contractor Information. Requests (CIRs) as assigned. Monitors assigned subcontractor(s) for compliance with subcontract technical requirements. Monitors discipline construction activities for compliance with the CPM schedule. Prepares and issues all discipline extra work authorization requests (RFMPs/WAs) with the approval of the Project Field Manager Coordinates with Field. Subcontract Administrator as needed. Maintains a daily log for site record purposes. Completes quantity take-offs as required to support construction planning and invoice approval. Reviews all subcontractor progress payment requests for acceptance. Monitors technical service representative (supplier) daily logs and reviews/approves their timesheets. Compiles and maintains Conformed to Construction Records drawing and list markups as assigned. Directs site document control activities for design documents. Assists Field Quality Assurance Manager in performing inspections and verification of tests. Adheres to safety and quality standards as appropriate for level of duties and accountabilities. Supports continuous improvement efforts and the change management effects associated with the implementation of improvements. Provides commercial direction, interpretation of subcontracts, and administers discipline specific or assigned contract requirements in coordination with Field Subcontract Administrator or Procurement Manager. Reviews, maintains records, and responds to Contractor Information Requests (CIRs) as assigned. Acts in capacity of a "lead person" Does not have management responsibility for the people to whom they provide work direction except as assigned Directs other discipline engineers, general foreman, craft personnel, TA's, and vendor representatives.

Education: MUST have a BS in engineering. Preferrably Civil since it is dealing with underground construction (but not a deal-breaker)

Job Title - Engineering, Design, R&D - Testing Technician

Duration: 12month

Location: Burlington, MA

The Testing Technician is responsible for creating formulations on the benchtop, brewing using client Brewers and testing the formulations both pre-brewing as well as the finished beverage for a number of analytical measures and sensory testing.

The role will include:

- Preparing benchtop formulations including measuring and weighing ingredients, blending, and packing into single serve portions.

- Performing analytical and sensory analysis on samples both before and after preparation.

- Labeling, organizing, and putting samples into storage for shelf life testing.

- Maintaining documentation of incoming samples, samples prepared, samples in shelf life, as well as documenting test results

- Performing simple mathematical calculations to scale formulas or determine quantities for batch sizing

- Sample preparation for scientist and business partners to taste, including a clean appearance, and acting with politeness and confidence.

- Record and organize quality data in appropriate computer spreadsheets and report results to management.

- Provide training as required for new permanent and temporary personnel in proper test techniques and methods, as well as data recording requirements.

- Ability to troubleshoot issues with brewers or unexpected sample behavior and perform root cause analysis.

Our client is currently seeking a Electrical Maintenance Technician for their Consumer Goods Manufacturing facility located near Danvers MA. This is a Day Shift position working Monday - Friday. The Technician will oversee the repair, maintenance & preventative upkeep of production equipment & facility systems. The ideal candidate is detail-oriented, technically skilled, and proactive in ensuring maximum equipment reliability and minimal downtime in a manufacturing environment. Techs with a stronger electrical aptitude are desired. This person needs intermediate electrical skills & to be able to read a schematics & diagrams, identify safeties & relays and rewire components back into the machine correctly.

Interested Candidates should contact Lee Douglas @ 61 or email a current resume to

This job will have the following responsibilities:

• Perform preventive maintenance on production machinery, including engines, motors, pneumatic tools, conveyor systems, and packaging/processing equipment.
• Troubleshoot and diagnose equipment malfunctions and using precision measuring and testing instruments.
• Follow diagrams, sketches, operation manuals, manufacturer instructions, and engineering specifications to repair and maintain equipment.
• Fabricate, modify, or repair machine parts using machine shop tools and equipment
• Communicate with production teams to ensure proper operation and share preventive maintenance techniques.
• Support overall facility maintenance, including utilities, building systems, and general repairs.
• Maintain accurate maintenance records and report recurring issues to supervisors.
• Contribute to team goals by assisting coworkers and taking initiative on projects and repairs as needed.

Qualifications & Requirements:

• Technical / Vocational Education or Training preferred
• 3+ years of maintenance experience in a manufacturing environment
• Strong Electrical Maintenance Aptitude
• Strong mechanical aptitude with the ability to troubleshoot, repair, and maintain mechanical and electrical systems.
• Ability to read and interpret diagrams, technical manuals, and schematics

#JDP

The Vice President, Growth is a key executive leader responsible for developing and executing a unified growth strategy that accelerates company expansion across the Department of Defense and national security markets. The Vice President, Growth is responsible for shaping and executing Odyssey's growth strategy to deliver mission-critical solutions that ensure national security and warfighter readiness. This role integrates business development, capture management, proposals, and marketing into a unified, high-performance growth engine. The ideal candidate is a proven growth executive with deep knowledge of federal acquisition processes, strong customer relationships, and a record of accomplishment in winning large-scale federal contracts. Reporting directly to the CEO, the Vice President, Growth is a key member of the executive team, driving expansion, strategic positioning, and customer impact across the enterprise.

Growth Strategy & Leadership

• Architect, shape and lead the company's strategic growth strategy in alignment with its long-term vision, capabilities, and emerging customer needs.
• Translate strategic goals into executable business plans, capture priorities, and investment areas.
• Identify and assess adjacent market segments and emerging customer needs to inform growth priorities.
• Serve as a strategic advisor to the CEO and executive team on growth investments and performance, pipeline health and bid strategies, and competitive positioning.
• Identify market trends, customer priorities, and technology shifts to inform positioning and investment decisions.
• Collaborate with operations, technical, and finance teams to shape high value, differentiated offerings.

Business Development & Capture

• Drive the end-to-end business development lifecycle from opportunity identification through contract award.
• Lead opportunity identification, qualification, and capture across existing and emerging DoD markets.
• Manage and mentor a high-performing business development and capture team focused on prime contract growth.
• Build and maintain a robust forward-looking qualified pipeline of defense-focused pursuits, focusing on high-value opportunities.
• Engage directly with senior customers, program offices, and mission stakeholders to shape requirements and influence outcomes.
• Serve as executive sponsor/capture lead for strategic pursuits, ensuring competitive positioning and customer engagement.

Proposal Operations

• Oversee a centralized proposal function that delivers high-quality, compliant, and compelling responses.
• Implement scalable processes, tools, and color team reviews to drive proposal efficiency and excellence.
• Collaborate with operations and technical teams to craft win themes, discriminating value propositions, and solution differentiators.
• Standardize proposal operations with repeatable tools, templates, and processes across all phases (RFI, RFQ, RFP).

Marketing & Brand Positioning

• Lead Odyssey's marketing strategy to amplify our voice, mission, and value to the defense community.
• Position Odyssey as a trusted, mission-aligned partner by elevating visibility at industry events and conferences.
• Drive the development of thought leadership content, campaign strategies, digital assets, and event engagement.
• Ensure brand consistency across all internal and external channels and communication platforms.
• Oversee the creation of content including white papers, capability statements, website messaging, case studies, and social media.

Customer & Partner Engagement

• Serve as a visible ambassador of Odyssey's mission and capabilities across the defense ecosystem.
• Cultivate and nurture enduring relationships with senior government customers, acquisition leaders, and industry partners.
• Represent the company at industry events, conferences, and government forums as a growth ambassador.
• Identify, negotiate and manage teaming relationships, strategic partnerships, small business, and joint venture alliances that enhance market competitiveness.

Internal Collaboration & Leadership

• Champion a culture of growth, agility, accountability, and team development across the organization while mentoring and developing Growth team members.
• Collaborate with operational leaders to ensure proposed solutions align with customer needs, delivery capacity and technical excellence.
• Work closely with operations, finance, HR, and technical leaders to ensure solutions are aligned with customer needs and delivery capabilities.
• Provide executive-level reporting on key growth metrics, win rates, pipeline health, and strategic goals to executive leadership and Board stakeholders.

Citizenship: Must be a US citizen

Clearance: Must have an Active Secret Clearance with the ability to obtain Top Secret

Minimum Required Qualifications:

Education: Bachelor's degree in business, engineering, public policy, or related field.

Years of Experience: 15+ years of experience in federal business development, capture, or strategic marketing in the defense sector.

Preferred Qualifications

Clearance: Active Top Secret

Education: Advanced degree (MBA or relevant technical field)

• Proven success leading and winning complex DoD services contracts
• Deep understanding of federal acquisition regulations (FAR/DFARS), procurement strategies, and GWAC/IDIQ/OTA vehicles.
• Strong executive presence with demonstrated experience briefing senior government officials and C-level management.

The ideal candidate is:

• Mission-Oriented: Understands and supports the national defense mission and warfighter priorities.
• Growth-minded: Combines analytical rigor with creative pursuit strategies.
• Integrated Thinker: Seamlessly connects capture, proposals, and marketing into a strategic growth engine.
• Collaborative: Operate effectively across diverse technical and operational teams.
• Customer-Centric: Builds trust through deep engagement, insight, and tailored solutions.
• Brand-Aware: Understands how to communicate value and differentiation across federal and industry audiences.
• Results-Driven: Motivated by measurable outcomes, accountable for pipeline development and win rates.
• Resilient and accountable: Able to navigate complex pursuits and maintain high performance under pressure.

Additional Information:

Location: Corporate Headquarters - Wakefield, MA

Travel: Up to 50%

Remote, Onsite, or Hybrid: Onsite

Odyssey Systems Consulting Group, is an innovative small business committed to providing world-class technical, management, and training support services to government and public sector clients. We focus on people, processes, and performance to deliver superior results. Since our inception in 1997, our commitment to mission success and customer satisfaction has been recognized with exponential growth and exceptional past performance ratings. We accept challenging assignments and drive projects from the planning stages, through implementation, and into operations and support.

Please note: Final compensation for this position will be determined by various factors such as the Federal Government contract labor categories and contract wage rates, relevant work experience, specific skills and competencies, geographic location, education, and certifications.

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

About GE Aerospace

If you want to do work that really matters among a team of spirited and collaborative individuals, you need to know more about GE Aerospace. We've become a world leader in the design, development and manufacture of advanced aviation technologies including jet engines, components, and integrated systems for commercial and military aircraft. We're a people-first organization that will bring out your best ideas and performance as part of our on-going LEAN transformation. We believe that the world works better when it flies. Do you? If so, come aboard.

Working at our Lynn Facility

Come and elevate your career in a facility that combines a rich tradition of aviation technology with a deep commitment to the future of flight. The GE Aerospace manufacturing site in Lynn designs, produces, assembles, and tests military and commercial aircraft engines and components. With more 2,500 employees and 1.6 million sqft of manufacturing space, we're making a huge contribution to the future of flight. And, considering that very first jet engines were born here in 1942, we clearly are the career home of people who are deeply knowledgeable about building quality engines. What's more, GE Aerospace has invested more than $100 million in our facility in the last five years alone.

By engaging with highly collaborative teams, we're reaching for new Sustainable Aviation Fuel milestones every year. And by encouraging our teams to join us in extensive community service and volunteerism, we're making a difference in all the ways that matter.

Here are just a few of the best reasons you will want to consider us:

• Do work with a real purpose helping to solve the global challenge of how the world flies more sustainably.
• Be a part of a global workforce of diverse backgrounds, perspectives, ideas, and experiences where everyone feels supported and respected.
• Earn merit-based rewards and incentives.
• Free Onsite Parking.
• Set work schedule with no mandatory overtime.
• Work in a climate-controlled building out of the elements.
• Have opportunities for continuous learning and development.

Job Overview:

This is a challenging opportunity that involves complete assembly, disassembly, test set up, adjustment, and inspection of aircraft engines and major components in accordance with assembly, test or engineering instructions, specifications, and drawings. You'll do set-up and operate a variety of standard and specialized tools and a variety of balance machines to perform all types of balancing operations.

The Ideal Candidate:

We are looking for a team player who is looking to help continue our vision of seeing not only our engines take flight, but their careers as well. Utilizing your training or military experience in the field to provide detail-oriented support on aircraft engine assembly and test functions.

Requirements include:

• High School diploma or equivalent.
• FAA Power Plant License; OR 2 years minimum experience aircraft power plant maintenance experience with another company; OR 2 years minimum experience as an aircraft aviation mechanic or equivalent in a branch of the military.
• Relocation assistance available!

Preferred qualifications:

• Strong interpersonal and communication skills.
• Proficient in the use of basic hand and power tools.
• Experience in the use of precision measuring instruments.
• Experience with computers, applications, and keyboarding.

Additional Information:

• If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation for purposes of participating in the application/hiring process with GE. If you are unable or limited in your ability to apply or interview as a result of your disability, you can request reasonable accommodations by emailing us at .
• Any offer of employment is conditioned upon the successful completion of a background check and drug screen (as applicable).
• You must have the ability to lift, move, and manipulate fixtures and component hardware up to 45 lbs. with or without reasonable accommodations.

Whether we are manufacturing components for our engines, driving innovation in fuel and noise reduction, or unlocking new opportunities to grow and deliver more productivity, our GE Aerospace teams are dedicated and making a global impact. Join us and help move the aerospace industry forward.

The pay for this position is $32/hr. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on 12/31/2026.

GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness.

GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a \"Sponsor\"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual.

This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)).

GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunities Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Relocation assistance provided: Yes.

Locations: Atlanta | Boston | Heredia

Who We Are

Boston Consulting Group partners with leaders in business and society to tackle their most important challenges and capture their greatest opportunities. BCG was the pioneer in business strategy when it was founded in 1963. Today, we help clients with total transformation-inspiring complex change, enabling organizations to grow, building competitive advantage, and driving bottom-line impact.
To succeed, organizations must blend digital and human capabilities. Our diverse, global teams bring deep industry and functional expertise and a range of perspectives to spark change. BCG delivers solutions through leading-edge management consulting along with technology and design, corporate and digital ventures—and business purpose. We work in a uniquely collaborative model across the firm and throughout all levels of the client organization, generating results that allow our clients to thrive.

What You'll Do

POSITION DESCRIPTION

We are seeking a motivated and experienced Technical Application Engineer to lead the engineering, administration, and optimization of personal productivity applications across BCG. This role plays a critical part in ensuring that BCG's suite of productivity tools—including Microsoft 365, Adobe Acrobat and Creative Cloud, and other integrated third-party applications—are implemented and operated at peak performance. As a key member of the Productivity Tools team within BCG's Personal Productivity Organization, you will collaborate with product owners, vendors, and architects and engineering teams to ensure seamless user experiences, effective governance, and ongoing operational excellence.

Key Responsibilities:

• Engineering & Administration
• Manage and configure enterprise application services across both legacy and cloud platforms.
• Lead upgrades, rollouts, patching, and migrations for a variety of applications.
• Conduct health checks, monitoring, troubleshooting, and performance tuning.
• Integrate applications with third-party platforms or in-house solutions.
• Support complex deployments and ensure high availability of services.
• Governance, Documentation & Support
• Define and maintain SOPs, administrative practices, and end-user documentation.
• Develop governance frameworks around licensing, lifecycle, and architecture.
• Provide Tier 3 escalation support and resolve complex technical issues.
• Mentor service desk teams and promote best practices in application usage and management.
• Collaboration & Cross-Team Engagement
• Coordinate with network, security, and support teams for seamless application service delivery.
• Participate in planning, migrations, upgrades, and project execution.
• Liaise directly with Microsoft, Adobe and other vendors for advanced configuration and support scenarios.

Core Focus Areas:

• Deliver robust engineering and operational support for Microsoft 365 apps, add-ins, Adobe Acrobat, MS Forms, and other productivity tools.
• Drive standardization and operational consistency across the firm's application portfolio.
• Provide leadership and guidance within the M365 Application Governance Council.
• Contribute to the strategy and implementation of productivity-enhancing tools firmwide.

What You'll Bring

Experience Required:

• 5+ years of experience managing enterprise-grade applications, with 3–5 years specifically in Microsoft 365 administration and technical product analysis.
• Proven experience in Adobe Creative Cloud deployment and productivity enablement.
• Strong background in enterprise M365 configuration and governance, including automation tools like Power Automate and scripting with PowerShell and Microsoft Graph API.
• Advanced capabilities using GraphAPI, PowerShell, SQL, and Power BI for:
• Scripting and bulk administration
• Automating service management
• Data analysis and backend reporting
• Visualizing application performance metrics
• Background in implementing GenAI capabilities across Microsoft 365 (e.g., Powerpoint, Word, Excel) is a significant plus.
• Familiarity with Azure AD, Conditional Access, Defender for Office 365, Intune, and related services.
• Expertise in managing applications in a cross platform environment such as Windows, Mac (OSX), and iOS platforms.
• Experience across application development life cycles, including requirements design, development tracking, change/release management, and operational support.
• Ability to identify and manage integration dependencies across M365 apps and third-party solutions.
• Strong incident management, security compliance, and vulnerability remediation experience.
• Track record in defining KPIs and reporting on performance and service stability.
• Level C2 English proficiency as demonstrated by IELTS 8.5+, TOEFL iBT 110+, TOEIC 945+, CAMBRIDGE CPE, or comparable demonstrated proficiency.
• B.S. CS/MIS or four (4) additional years relevant experience in lieu of degree

Preferred Qualifications:

• Certifications such as MS-100, MS-101, SC-300, AZ-900 are highly desirable.
• Agile/Scrum experience and familiarity with Jira, Confluence, or Azure DevOps.
• Prior involvement in enterprise-level security policy enforcement and tooling compliance.
• Strong communication skills with an ability to convey technical issues to non-technical stakeholders.
• Key Attributes for Success:
• Excellent organizational and time management skills.
• Proven ability to manage multiple priorities in a fast-paced environment.
• Proactive problem-solver with a collaborative mindset.
• Clear, confident communicator with strong documentation capabilities.

Additional info

*** For US locations only ***

In the US, we have a compensation transparency approach.

Total compensation for this role includes base salary, annual discretionary performance bonus, retirement contribution, and a market leading benefits package described below.

• The base salary range for this role in Atlanta is $121,000.00 - $147,700.00

This is an estimated range, however, specific base salaries within the range depend on various factors such as experience and skill set. It is not common for new BCG employees to be hired at the high-end of the salary range. BCG regularly reviews its ranges to ensure market competitiveness.

In addition to your base salary, your total compensation will include a bonus of up to 16% and a generous retirement contribution that starts at 5% and moves to 10% after 2 years.

All of our plans provide best in class coverage:

• Zero dollar ($0) health insurance premiums for BCG employees, spouses, and children
• Low $10 (USD) copays for trips to the doctor, urgent care visits and prescriptions for generic drugs
• Dental coverage, including up to $5,000 in orthodontia benefits
• Vision insurance with coverage for both glasses and contact lenses annually
• Reimbursement for gym memberships and other fitness activities
• Fully vested Profit Sharing Retirement Fund contributions made annually, whether you contribute or not, plus the option for employees to make personal contributions to a 401(k) plan
• Paid Parental Leave and other family benefits such as elective egg freezing, surrogacy, and adoption reimbursement
• Generous paid time off including 12 holidays per year, an annual office closure between Christmas and New Years, and 15 vacation days per year (earned at 1.25 days per month)
• Paid sick time on an as needed basis

Boston Consulting Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity / expression, national origin, disability, protected veteran status, or any other characteristic protected under national, provincial, or local law, where applicable, and those with criminal histories will be considered in a manner consistent with applicable state and local laws.
BCG is an E - Verify Employer. Click here for more information on E-Verify.

Are you a hands-on Quality leader who thrives in high-accountability environments and believes great culture drives great results? We’re looking for a Site Quality Manager to lead all Quality functions at our North Billerica facility and play a key role in shaping performance, compliance, and team development.

If you’re passionate about building strong teams, driving continuous improvement, and ensuring world-class quality standards — this is your opportunity to make a measurable impact.

As the Site Quality Manager, you will:

• Lead and continuously improve our AS9100 / ISO 9001 Quality Management System
• Oversee MRB, NCMRs, CAPAs, SCARs, RMAs, and root cause investigations
• Direct all inspection activities (In-Process, Pre-Mold, Final) including AS9102 First Article Inspections
• Ensure cable and harness assemblies meet IPC-620, J-STD-001, AS9102, and customer requirements
• Review and approve work order packages, C of Cs, and shipment documentation
• Monitor quality metrics, defect trends, and drive Zero Defect initiatives
• Lead internal audits and support customer and certification audits
• Partner cross-functionally with Production, Engineering, Planning, Procurement, and Corporate Quality
• Develop and mentor the Quality team, building capability and accountability at every level
• Serve as the primary customer liaison for quality-related matters

Technical Expertise:

• Strong working knowledge of AS9100 Rev D and ISO 9001
• Experience with AS9102 First Article Inspection
• Familiarity with IPC-620 and J-STD-001 (Space Addendum a plus)
• Deep experience with NCMR, MRB, CAPA/RCCA, and root cause analysis
• Aerospace or military manufacturing background preferred
• Ability to read and interpret engineering drawings, wire lists, and MIL specs
• Experience in build-to-print cable/harness manufacturing is a plus

Leadership & Impact:

• 5+ years in Quality Assurance/Quality Control within manufacturing
• Prior team leadership experience
• Proven track record leading corrective actions to closure
• Experience conducting internal audits under AS9100
• Strong analytical skills with the ability to turn data into actionable insights
• Clear, professional communication with customers and suppliers

This is a high-visibility leadership role in a fast-paced aerospace manufacturing environment where quality is mission-critical.

Role Overview

The Key Account Manager (KAM) is responsible for managing and expanding Pion’s most

strategic customer relationships within the Boston market. This role is central to the

company’s growth strategy and carries meaningful ownership over revenue performance,

account expansion and long-term customer value.

The KAM operates with a high degree of autonomy and accountability, working in a

performance-driven environment where accurate forecasting, structured account

planning, and disciplined execution are essential. This is not a transactional sales role - it

requires strategic thinking, scientific credibility and operational rigor.

Key Responsibilities

Strategic Account Management

 Own and execute comprehensive account plans aligned to company growth targets

 Build deep, multi-level relationships across R&D, Analytical, CMC and Procurement

 Understand customer workflows, strategic priorities, and long-term pipelines

 Position Pion as a long-term partner through value-based, consultative engagement

 Identify expansion opportunities tied to new applications, enhanced products and

evolving customer needs

Sales Execution & Growth

 Deliver against defined revenue and growth objectives for assigned territory

 Manage complex sales cycles involving capital equipment, consumables and

services

 Maintain disciplined pipeline management, opportunity qualification and

forecasting

 Ensure CRM accuracy and timely updates to support operational planning and

leadership visibility

 Set and manage customer expectations around manufacturing schedules, lead

times and delivery constraints

Operational Excellence & Rigor

 Operate with a high level of structure, accountability and follow-through

 Partner closely with Operations, Manufacturing, Applications, and Service to drive

predictable outcomes

 Proactively identify risks and constraints, escalating appropriately and early

 Contribute to continuous improvement of sales processes, tools, and cadence

Customer Advocacy & Internal Collaboration

 Serve as the primary commercial owner for assigned territory accounts

 Coordinate internal resources to ensure successful installations, adoption and

ongoing value realization

 Act as the voice of the customer, providing actionable feedback to Product and

Leadership teams

 Navigate escalations and competitive pressures with professionalism and clarity

Market & Competitive Insight

 Maintain strong awareness of regional market dynamics, competitors and emerging

technologies

 Represent Pion customer meetings, scientific forums and industry events

 Identify high-growth opportunities within pharma, biotech, CDMOs and academic

institutions in the Boston ecosystem

Qualifications & Experience

Required

 Advanced degree in Chemistry, Pharmaceutical Sciences, Engineering or a related

scientific discipline preferred

 5+ years of experience in life sciences sales

 Demonstrated success managing complex, high-value strategic accounts

 Strong understanding of drug development workflows

 Ability to operate e􀆯ectively in a performance-driven, growth-oriented environment

 Strong organizational skills with a track record of operational discipline and

execution

 Willingness to travel regionally and occasionally nationally

Preferred

 Experience selling analytical instrumentation or pharmaceutical enabling

technologies

 Familiarity with capital equipment sales cycles

 MBA or advanced scientific degree

 Experience working cross-functionally within a global organization

What Success Looks Like

 Measurable contribution to Pion’s strategic growth targets

 Strong penetration and expansion within assigned key accounts

 Accurate forecasting and disciplined account management

 High customer trust and long-term partnership development

 Consistent demonstration of operational excellence and accountability

Why Join Pion

 Be part of a respected scientific company entering an exciting new growth phase

 Work with enhanced technologies that are expanding Pion’s impact in drug

development

 Operate in a role where individual performance directly influences company

success

 Collaborate with a knowledgeable, committed team focused on execution and

results

 Competitive compensation, incentive plan and benefits

Our client, a fast-paced leader in product development, is seeking a Manufacturing/Process Engineer to join their very busy team. The Manufacturing/Process Engineer will support the transition of products from engineering to manufacturing and will be responsible for bringing new products from Design Verification build to Pilot Production. Additionally, the Manufacturing/Process Engineer will support the design, installation, and operation of production processes, including sheet metal fabrication, foaming of refrigeration enclosures, heat pipe assembly, electro-mechanical assembly, and performance testing. They will also collaborate with engineers in Design for Manufacturability to transition new products from Design Verification builds into Manufacturing Validation builds and Mass Production, as well as work in a multidisciplinary production and development team.

To be successful in this role, candidates will utilize SolidWorks to produce deliverables, including production assembly procedures, and will also provide technical training to the production staff for all new product introductions to enhance product quality and maximize production efficiency. In this very important role, candidates must be experienced engineers who can work independently and communicate clearly with managers, co-workers, and clients. Candidates with an Engineering degree in Mechanical, Manufacturing, or Industrial Engineering, and at least 10 years of manufacturing engineering experience, will be considered. Please apply if you meet these qualifications and are local to the Greater Boston area.

Additional Responsibilities and Qualifications

• Troubleshoot and resolve production line failures and technical issues.
• Design and implement functional fixtures and gauges to increase efficiency, improve quality, and minimize defects.
• Support the installation, programming, and maintenance of production equipment and materials.
• Lead continuous improvement initiatives for production line defects and field failures.
• Support the implementation of an ERP system and process ERP data to reinforce a lean manufacturing environment.
• Analyze production times, shop layout, and costs to provide reports for operational decisions.
• Collaborate with engineers to improve control processes for existing products and implement new control processes for new product introductions.
• Experience with refrigeration systems and foaming tools is preferred.
• Experience with various fabrication processes such as vacuum forming, injection molding, sheet metal forming, and rapid prototyping methods
• Working knowledge of Lean Manufacturing and Six Sigma principles is preferred.
• Ability to generate robust mechanical drawings, assembly procedures, and written reports. 3D CAD experience is a must. SolidWorks proficiency required.
• High level of personal commitment to quality, with demonstrated thoroughness and attention to detail in all phases of a process or project.
• Excellent communication and interpersonal skills, highlighted by a flexible and collaborative working style.
• Due to the nature of the work, citizenship or legal residents only will be considered.

Manufacturing Engineer | Wilmington, MA

Contract-To-Hire (6-Months)

Provide engineering and project management skills in support of the design and development of new processes/equipment, the scale-up and commercialization of new products, the continual improvement of existing technologies, and the optimal performance and troubleshooting of existing operations.

Responsibilities

• Provide strong engineering skills in support of the scale-up and development of new products and processes. This includes methods, procedures and specifications to ensure a timely transfer to Manufacturing.
• Provide strong engineering understanding on continual improvement teams, developing process methods, designing/sourcing equipment, conducting feasibility/developmental trials, executing validation requirements, drafting documents/specifications/drawings, and providing on-the-job training to ensure the effective transfer/start-up of new/refined products/processes.
• Manage equipment and process validations, including creation of the protocol, identification of test requirements, analysis and presentation of results, and creation of the final report, in accordance with internal procedures and external regulations.
• Utilize Lean Manufacturing principles and appropriate tools to drive continual improvement of key operational measures, e.g. yield, velocity, takt time, inventory, nonconformances, etc.
• Provide engineering support to manufacturing and QA groups to ensure that production requirements are satisfied.
• Prepare presentations and reports, as appropriate, to communicate status of engineering projects, progress towards goals and objectives, future opportunities, and current risks/alternatives to senior management.
• Support the site in developing, training, and maintaining calibration/preventative maintenance programs and manufacturing process controls.

Requirements

• 2+ years of experience in an engineering position within a medical device manufacturing organization or GMP/FDA Regulated Environment
• Working knowledge of Lean Manufacturing Principles
• Six Sigma Green Belt Certification a plus.
• Electro-mechanical systems experience is a plus

Tewksbury, Ma (On-Site)

The successful candidate will have the knowledge and experience to lead the in-house engineering team in the design and construction of complex process-facility projects. 

Projects include new design and construction of manufacturing plants and facilities, and rehabilitation of existing plants/facilities and other high-hazard environments. 

A design engineer with hands on experience who can effectively manage their time and complete tasks on their own. 

Requirements 

B.S. in Chemical Engineering as a minimum

8+ years’ experience in chemical process engineering

Ability to work closely with a team of engineers of varied backgrounds and expertise and effectively align solution delivery with vendors to ensure ultimate satisfaction of the client’s requirements

Time management skills to deal with competing priorities while setting progressive yet realistic time frames and expectations relative to project deliverables

The Chemical Process Engineer will work to support the entire team in the execution of projects. Having knowledge of, and ability to perform, the following is required:

Working independently

Developing material and energy balances and process flow diagrams (PFD’s);

Development of piping and instrumentation diagrams (PID’s)

Equipment sizing, specifying and purchasing;

Equipment and piping layout design support,

Process and utility calculation

Gabriele & Company, recruiters for manufacturing and supply chain professionals, is working with a local manufacturer of electromechanical products used in industries including semiconductors, defense and medical devices.

Our client is looking for a Test Technician to build, maintain, and operate test stands to validate performance, reliability, and safety of industrial refrigeration systems and thermal management equipment.

Key Responsibilities

• Assemble, plumb, wire, and commission test stands including pumps, heat exchangers, valves, sensors, and data acquisition systems
• Execute functional, performance, and safety tests per established procedures
• Monitor and record critical parameters: temperatures, pressures, flow rates, power consumption
• Troubleshoot and document test failures; collaborate with engineering on corrective actions
• Maintain test equipment, calibration status, and lab organization
• Follow safety protocols including lockout/tagout, electrical safety, and refrigerant handling

Qualifications

• 2+ years as test technician or manufacturing technician in industrial/lab environment
• Hands-on experience with mechanical assembly, plumbing, basic electrical wiring
• Familiarity with refrigeration systems, HVAC, pumps, or heat exchangers
• Ability to read mechanical drawings, electrical schematics, and test procedures
• Strong troubleshooting skills and attention to detail

Preferred

• Knowledge of instrumentation and data acquisition systems
• EPA refrigerant certification or willingness to obtain

Compensation is hourly with benefits that included health/dental/vision, VERY generous PTO plan, 401(k) with match and more!

Vaxess is developing a pipeline of next-generation therapeutics on our novel micro-array patch platform. With only five minutes of wear-time on the skin, the Vaxess’ patch combines room temperature stability with simplified application to dramatically alter the way that drugs are delivered. Vaxess is committed to enabling products that are not only more effective, but also more accessible to patients around the world.

The Role

We are seeking a motivated and detail-oriented Research Associate with strong hands-on experience in chromatographic analysis to support QC release and stability testing. The successful candidate will perform routine cGMP QC testing using HPLC methods (RP-HPLC, SEC, IEX), Agilent HPLC systems, and additional supporting assays in a fast-paced, collaborative environment. This is a unique opportunity to be part of an emerging early-phase clinical company bringing innovative technology to the global market.

Key Responsibilities

• Perform routine QC release and stability testing using HPLC methods including RP-HPLC, SEC, and IEX.
• Prepare samples, operate Agilent HPLC systems, verify system suitability, and ensure analyses meet method and specification requirements.
• Execute complementary analytical assays such as UV-Vis, pH, surface tension, and mechanical tests.
• Maintain complete, accurate documentation in compliance with cGMP, ALCOA+, and data integrity requirements.
• Conduct routine instrument care (solvent flushes, column care, daily checks) and assist troubleshooting under supervision.
• Process and review chromatographic data in Agilent OpenLab CDS.
• Support method qualification, validation, and transfer activities by executing protocols and recording observations.
• Maintain calibration, maintenance, and service records for analytical instrumentation.
• Independently author method SOPs, analytical protocols, technical reports, and contribute to regulatory submissions.
• Collaborate cross-functionally with QC, Analytical Development, Process Development, Manufacturing, and Regulatory teams to enable program success.
• Maintain rigorous laboratory documentation and complete, audit-ready analytical records.
• Thrive in a fast-paced, cross-functional environment with excellent communication and organizational skills.

Qualifications

• Bachelor’s degree in Chemistry, Biochemistry, Chemical Engineering, or related field with 1–3 years of experience; or a master’s degree with relevant laboratory experience.
• Hands-on experience operating HPLC systems; Agilent systems and OpenLab CDS experience strongly preferred.
• Practical experience with chromatographic techniques including RP-HPLC, SEC, and IEX.
• Experience supporting QC release or stability testing in a GMP/GLP environment.
• Strong attention to detail and ability to follow SOPs precisely.
• Excellent documentation practices and understanding of data integrity.
• Strong organizational skills with the ability to manage multiple workflows and prioritize effectively in a fast-paced environment.
• Excellent verbal and written communication skills and comfort working within interdisciplinary teams.
• Commitment to collaborative work within interdisciplinary project teams.

At Vaxess, we’re bringing together exceptional talent to drive our product development forward. We value collaboration, curiosity, and a dynamic work environment. To apply, please submit your CV/resume to

Project Manager – Construction

Location: Woburn, MA Area

Compensation: $110,000 – $135,000 base salary + bonus

Employment Type: Full-Time

Overview

An established construction management firm in the Greater Boston area is seeking a Project Manager to lead complex building projects from preconstruction through completion. This role works closely with field leadership, design teams, and ownership groups to ensure projects are delivered on schedule, within budget, and to high quality standards.

This position offers strong long-term career growth, a collaborative team environment, and a comprehensive compensation and benefits package.

Responsibilities

• Manage project planning, scheduling, and overall execution
• Coordinate with Superintendents and project leadership to maintain progress and resolve challenges
• Oversee project documentation including RFIs, submittals, permits, and contract records
• Support procurement activities including subcontractor coordination and scope alignment
• Administer change orders and maintain scope control
• Act as primary contact for clients, architects, and consultants
• Prepare budgets, forecasts, and cost tracking reports
• Lead project meetings and maintain consistent communication across teams
• Ensure adherence to safety, quality, and schedule expectations
• Mentor junior project staff and support team development
• Manage project closeout including punch lists and final documentation
• Maintain strong client and partner relationships

Qualifications

• Bachelor’s degree in Construction Management, Engineering, or related field (or equivalent experience)
• 6–10+ years of construction project management experience
• Experience supporting large, complex building projects preferred
• Strong understanding of drawings, specifications, scheduling, and cost control
• Experience with construction management software (Procore, MS Project, Bluebeam, Excel or similar)
• Strong organizational and leadership skills
• Ability to work effectively in active construction environments

Compensation & Benefits

• Competitive salary plus performance bonus
• Comprehensive health and retirement benefits
• Professional development opportunities
• Collaborative, team-oriented culture
• Long-term career growth potential

OPTIMUM CONSTRUCTION, INC. is one of New England’s foremost construction managers and general contractors with a broad portfolio of projects for commercial, corporate, healthcare, housing, and institutional clients.

Our culture is defined by our simple purpose – Build Better Relationships & Better Buildings. We believe taking the time to really know people (each other, our clients, our subs) to be the key behind creating value and leading projects that connect people in New England.

Our team is growing. Optimum is hiring a full-time Assistant Project Manager to help us continue this great work and serve as a key team member of the project team. This position will be responsible for assisting in leading project teams within the construction projects from the preconstruction and construction phase through closeout with the Project Manager. Duties include identifying clients' or stakeholders’ project needs and goals, creating detailed plans to successfully complete projects, and organizing and storing project reports and documents for the Portland, Maine office location.

Essential Functions

• Assist in total project responsibility, scheduling, safety, staff compliance, buyouts, pay applications, monthly job status meetings, and quality control.
• Assist in managing client relationships, project planning, project document management, and assist in leading weekly subcontractor meetings.
• Assume full responsibility for submittal logs and submittals, RFI logs and RFIs.
• Assist in reviewing change orders with the General Contractor and Sub-contractors.
• Assist in scheduling and/or facilitating the various project meetings.
• Have thorough knowledge of all major project issues and priorities.
• Keep superiors informed concerning the progress of the project and any issues that might affect the schedule, budget or status of the project.
• Assist in close out of the project.
• Maintain and complete site reports (during all stages of production).

Qualifications

• Two (2) years of Project Management specific experience.
• BS in Engineering, Construction Management, or related field preferred.
• Knowledge of the construction process and understanding of the specifications and field labor.
• Knowledge of the project management process and principles of scheduling and estimating.
• Strong skills in time management, communication, and the ability to work within tight deadlines and under pressure.
• Ability to develop and maintain positive relationships with all parties involved in the construction project, while handling difficult issues and/or personalities.
• Self-motivated with excellent time management and organizational skills.
• Demonstrates strong critical and analytical thinking abilities.
• Proficient in using: Procore, Microsoft Word, Excel & Project.
• Ability to lead and accomplish Optimum’s objectives by maintaining and fostering a strong sense of personal responsibility and urgency.
• Ability to independently prioritize, make timely decisions and rapidly respond to changes and problems while using Optimum priorities and best practices as guidelines.
• Ability to work effectively in a collaborative team environment and to adjust to changes in priorities and work plans.

Benefits

Optimum Construction Inc. offers a competitive salary and generous benefits package including medical and dental insurance; 401(K) with company matching; Paid Time Off (PTO) earned plus company-paid holidays; professional development; and a collaborative, rewarding culture rooted in a set of Core Values that we believe results in shared success. To learn more visit, Construction Inc. is an Equal Opportunity Employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, gender, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization. Optimum Construction makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Applications and Submissions

Candidates can apply online or send a resume and letter of interest including job history and salary requirements.

If you’re not in the market, but you know of someone that would be a great fit, please share their name with us!