Engineering Jobs in None, WI

• 
  
• Assemble parts to complete units and component parts in a specialized area
  
  • The ability to perform all the following processes: Fixture Weld Inner Assemblies, Insulation Wrapping, Auto-Welder Operations, End of Cell Checking Fixtures, Air testing
  
  
• May use templates, fixtures, surface plate, calipers, snap gauges, or other inspection tools to measure welded components, bead size, or other necessary dimensions per blueprint. Watches for presence of burn through, cold starts, lack of penetration, bead size, or other indications of suspect welds.
  
• Set up and operate assigned machines to produce finished product in a final assembly
  
• Perform a variety of specialized assembly operations such as jigging, air testing, v-bands and component parts.
  
• Follow all ITAR processes when appropriate
  
• Utilize hand tools, power tools and other special equipment within department
  
• Cleanings and inspecting of all parts
  
• Complete proper paperwork per station
  
• Participate in the corrective action process to prevent defects from recurring.
  
• Follow procedures consistently to obtain repeatability.
  
• Participate in team meetings seeking continuous improvements for the operation.
  
• Observe all safety and OSHA procedures and standards. Maximum lifting of 25lb without assistance. PPE is required at times.
  
• Keep work area safe and clean (5S: Sort, Straighten, Shine, Standardize, Sustain)
  
• Assume responsibility for quality workmanship that meets and/or exceeds customer expectations.
  
• Perform other duties as directed by the supervisor/lead
  
• Other jobs as assigned
  

• 
  
• Must remain current on all welding methods required by NGP or our Customers.
  
• Must have demonstrated mechanical aptitude, proficiency in shop math (fractions, decimals, metric), ability to read and follow specific routing instructions, ability to read and understand setup instructions, ability to read blueprints, proficiency in the use of appropriate measuring instruments (tape measure, dial calipers), ability to check quality of parts against templates.
  
• Must pass the NGP Weld Test.
  
• Must have demonstrated ability to handle production requirements and demonstrated problem solving ability from previous work.
  

• 
  
• Must have the ability to stand for 10-hour shift.
  
• Able to bend, twist, stoop to remove parts from baskets and lift to work area.
  
• Able to load parts into work area and complete baskets without damaging the part.
  
• Good hand and eye coordination.
  
• Ability to lift 25 lbs.
  

• 
  
• $3000 Sign-On Bonus!
  
• Medical, Dental, and Vision Coverage
  
• Wellness Programs
  
• 401K Retirement Plan
  
• Short-Term Disability (STD)
  
• Generous Paid Time Off
  
• Company-Paid Life Insurance
  
• And More!
  

We are seeking a hands-on, detail-oriented Quality Supervisor to lead quality assurance and inspection efforts within a fast-paced manufacturing environment. This is a high-impact leadership role for someone who thrives on driving quality standards, developing strong teams, and improving processes that directly impact product performance and customer satisfaction.

If you’re passionate about building a culture of accountability, continuous improvement, and operational excellence, this is an outstanding opportunity to make a visible impact.

This is more than a traditional quality leadership role — it’s a chance to step into a highly visible position within a growing manufacturing organization that is backed by a major industry player and investing heavily in its future. With strong momentum, expanding capabilities, and a clear path for growth, this role offers the opportunity to make a measurable impact while helping shape the next chapter of the business.

What You’ll Do

As the Quality Supervisor, you will oversee day-to-day quality operations across the manufacturing process and ensure products meet rigorous internal and external standards. You’ll partner cross-functionally with production, engineering, and operations teams to resolve issues, improve systems, and elevate overall quality performance.

Key Responsibilities

• Lead and coordinate quality assurance and inspection activities across manufacturing operations
• Supervise a team of quality inspectors, technicians, and team leads across multiple shifts
• Ensure compliance with ISO 9001, ISO 14001, and other applicable quality standards
• Develop, implement, and maintain quality control procedures, systems, and documentation
• Conduct internal audits and help prepare for external audits and inspections
• Drive root cause analysis on non-conformances and lead corrective/preventive actions (CAPA)
• Partner with cross-functional teams to quickly resolve quality issues and improve outcomes
• Maintain inspection records and quality documentation with a high level of accuracy
• Train team members on quality systems, inspection methods, and regulatory requirements
• Identify and implement process improvements that enhance product quality and operational efficiency
• Support and enforce plant safety standards and best practices

What We’re Looking For

We’re looking for a leader who can balance technical quality expertise with strong people leadership. The ideal candidate brings a solid foundation in manufacturing quality systems, understands how to work across teams, and knows how to create structure and accountability on the floor.

Preferred Qualifications

• 3+ years of supervisory experience in a manufacturing environment
• 5+ years of experience working with ISO 9001 quality systems
• Experience leading quality assurance, inspection, or quality systems in a production setting
• Strong experience with root cause analysis, non-conformance resolution, and CAPA processes
• Ability to read and interpret blueprints, technical drawings, machining drawings, and CAD models
• Experience with ERP systems and strong working knowledge of Excel
• Hands-on experience using precision inspection equipment such as:
• CMM
• 3D scanners
• Calipers
• Gauges and other metrology tools
• Strong communication skills with the ability to lead teams and collaborate cross-functionally
• High school diploma required; bachelor’s degree in Engineering, Quality, Business, or a related field preferred
• Relevant quality certifications are a plus

Preco is now hiring a Full-Time Production Supervisor (2nd Shift) for their Metals Department in Somerset, WI.

The Production Supervisor would have all production personnel on that shift as direct reports. The team will be focused on the Metals Market. The Supervisor is responsible for training and motivating employees. The team must meet quality, production, and efficiency goals. The Production Supervisor is to be a point of contact for anyone on shift for questions or directions. The Supervisor is responsible for communication with other groups and shifts.

Preco is a leading designer and manufacturer of precision automated processing systems for high-speed and high-accuracy cutting, perforating, welding, and other specialized industrial processing applications. With our proprietary die cutting and laser-based manufacturing capabilities, Preco has also become one of the largest contract manufacturing service (CMS) providers in North America.

Key Responsibilities:

• Ensure all personnel are aware of and follow Preco safety protocols.
• Follow and meet the manufacturing schedule as defined by Scheduler. Adjust personnel to maintain schedule priorities.
• Strive to manufacture all products to meet specifications. Troubleshoot and resolve quality issues. Stop production if solution cannot be found.
• Support data accuracy and input for production analytics. Use data to analyze productivity to manage production and personnel. Make recommendations to management as appropriate.
• Identify process and procedure problems that negatively affect quality and efficiency. Work with team, other shifts, Engineering, and Quality to resolve problems and continuously improve process.
• Communicate issues and solutions across all shifts. This ensures solutions are leveraged and problems are not repeated.
• Ensure team has resources, tools, and materials to keep machines running efficiently and without quality defects.
• Identify training needs for personnel on shift and schedule training.
• Develop/implement growth and development plans for personnel. This includes daily feedback and annual reviews.
• Verify that orders are complete, documentation is complete and accurate, parts are packed and labeled, properly report time and quantity correctly, and ready to be shipped (all paperwork is filled out completely and correctly).
• Assure production team is performing line clean out and work cell clean up prior to next job or shift.
• Responsible for meeting all SQF (Safe Quality Foods), quality, and customer requirements for this position.
• Responsible for facility lock up and shutdown of unused laser systems.
• Other tasks assigned by supervisor.

Job Requirements:

• High school diploma or GED.
• Minimum 5 years’ experience in a supervisory role utilizing automated production equipment.
• Excellent communication and interpersonal skills.
• Ability to prioritize tasks.
• Strong organizational and time management skills.

Preferred Qualifications:

• Associate Degree or coursework in Management, Business, or Leadership.
• Working knowledge of quality management system (QMS), International Organization for Standardization (ISO), and SQF.
• Exposure to or completion of formal business courses beyond the high school level.

Our dedicated staff keeps us at the leading edge of precision automated processing systems in our industry. When you work at Preco, you have the opportunity to apply your skills to create optimal solutions for our customers. We have a collaborative culture and a team united by a passion to provide solutions to our customers.

Preco has partnered with Hueman for its recruitment needs.

If you are interested in learning more about a career with Preco as a Production Supervisor, apply today!

Company Description

• Founded in 1975, New Berlin Plastics (NBP) is a family-owned leader in custom injection molding, specializing in high-precision, engineering-grade components. Based in a state-of-the-art, 100,000-square-foot facility in New Berlin, WI, we pride ourselves on being more than just a manufacturer; we are a strategic partner to some of North America’s leading OEMs. At NBP, you aren't just a cog in a machine; you are part of a team that values continuous improvement, technical expertise, and a "solution-first" mindset.

Job Description

• Supervise and coordinate daily activities of the production employees to ensure a quality product is produced to meet on-time delivery goals in a cost-effective and safe manner

Duties and Responsibilities

• Assign and prioritize work to produce products according to the production schedule.
• Ensure company policies, safety procedures, and quality standards are followed by all team members
• Actively coach, train, develop, and counsel employees for personal and professional growth opportunities to continually enhance their skill sets.
• Identifies training gaps and ensures production employees receive all required training in a timely manner and cross-training is completed as needed.
• Works with Manufacturing Manager to identify and implement improvement projects to increase safety, production efficiency, and reduce downtown.
• Perform daily shift audits and monitor scrap, molding and finishing performance to ensure quality and quantity standards are met.
• Maintain a safe and clean work environment by periodic inspections of production equipment, workstations, and plant. Request/direct corrective action as needed.
• Review shift-end reports for transaction errors, inefficiencies, and scrap issues and work to resolve issues through communication, training, or corrective action.
• Provide technical assistance with production/process problems
• Work with Human Resources in staffing activities such as interviewing, hiring, career pathing, and training and development of production employees.
• Maintain good employee relations and continuously monitor employee performance.
• Maintain personnel/attendance records of assigned employees.
• Investigate and document work-related injuries.
• Supervisory Responsibilities: Production Employees, Quality Assurance Auditors
• Other duties as assigned.

Qualifications

• Bachelor’s degree and 5 years of supervisor experience in manufacturing and/or a combination of relevant work experience and education in related field.
• Injection Molding experience preferred
• Demonstrated leadership skills to develop, mentor, motivate, and hold others accountable
• Ability to mitigate teams conflicts and elicit cooperation from a wide variety of sources / cross functional teams.
• Strong problem-solving abilities and continuous improvement mindset.
• Proficient with Enterprise Resource Planning (ERP) software. IQMS a plus.
• Ability to be flexible and responsive to changing scheduling requirements.
• Basic proficiency with Microsoft Office (Word, Excel, Outlook)
• License or Certificate Suggested: Forklift

Physical & Work Environmental Requirements

• The physical demands here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with physical disabilities to perform the essential functions.
• Employee is frequently required to stand; use of hands to fingers, talk, and hear. The employee is occasionally required to walk; sit; and stoop, or kneel. Specific vision requires include close vision and color vision.
• Manufacturing and office environment. Safety glasses required in the plant.

All your information will be kept confidential according to EEO guidelines.

Job Title: Deviation Investigation Writer/Associate

Location: Pleasant Prairie, WI

Duration: 3-Month Contract (Potential of Extension)

Overview:

We are seeking two detail-oriented and driven professionals to join a dynamic manufacturing

operations team as Deviation Investigation Writers. These individuals will play a critical role in

supporting quality compliance by documenting and investigating deviations—unexpected events that

impact product quality, safety, or regulatory standards.

Key Responsibilities:

• Ghostwrite deviation investigation reports on behalf of technical staff, including operators and engineers.
• Collaborate with subject matter experts to gather information and draft clear, audit-ready documentation.
• Support root cause investigations (RCI) and contribute to continuous improvement efforts.
• Assist in managing deviations across various manufacturing areas, including filling, inspection robotics, and process operations.
• Ensure documentation meets regulatory standards and is easily understandable by auditors and cross-functional teams.

Required Qualifications:

• Proven experience in technical writing, preferably in a regulated or manufacturing environment.
• Background in quality assurance, engineering, or a related technical field.
• Ability to quickly learn complex manufacturing processes and translate them into clear, structured documentation.
• Strong analytical and communication skills.
• Comfortable working independently and collaboratively in a fast-paced setting.

Preferred Qualifications:

• Experience writing deviation investigation reports or supporting root cause analysis.
• Familiarity with manufacturing environments such as pharmaceutical, chemical, or food production.
• Understanding of parenteral manufacturing processes is a plus, but not required.

Installing underground cables for power transmission, power distribution, renewable energy and communication networks is a necessary step in hardening the electrical grid, delivering reliable communication networks, and integrating renewable energy into our existing systems. Michels Underground Cable, Inc. is one of the most trusted underground line and duct bank contractors in the United States. We do it all – from directly burying or installing protective casing for solid and stranded conductors and copper, fiber optic and coaxial cable. Our work improves lives. Find out how a career at Michels Underground Cable, Inc. can change yours.

As an Associate Project Manager your key responsibilities will be to serve as project support by planning, organizing, and implementing project management principles. This position must demonstrate an understanding of how the business runs, how changing circumstances are handled, and who to contact when there are questions. Critical for success are the abilities to work independently and as a part of a team, meet deadlines, and anticipate and meet internal customer needs

Why Michels Underground Cable, Inc.?

• Customers trust us to build cables that will be out of sight, but in high demand
• Our steady, strategic growth revolves around a commitment to quality
• We are family owned and operated
• We invest an average of $5,000 per employee on training each year
• We perform challenging, meaningful work that improves the world
• We believe everyone is responsible for promoting safety, regardless of job title
• We are a part of the Michels family of companies – one of North America’s largest, most diversified energy and infrastructure contractors
• We offer a comprehensive benefits program, including Health, Dental, Life, Flexible Spending Accounts, Health Savings Account, Short Term and Long Term Disability Insurance, 401(k) plan, Legal Plan, and Identity Theft and Monitoring Plan. Depending on your positions and location you may participate in a different benefit plan.

Why you?

• You like to surround yourself with dedicated, value-driven people
• You relish new challenges and evolving technology
• You cringe when you hear: “Because that’s the way we’ve always done it.”
• You like to know your efforts are noticed and appreciated
• You want to make your own decisions, but know support is always available
• You want to work to make a difference in people’s lives

What it takes?

• Bachelor’s degree in construction management, civil engineering or related field, 3 years of related experience or equivalent combination
• Experience with Microsoft Office Suite, job cost tracking software, estimating software or Primavera (desired)
• A valid driver’s license for the type(s) of vehicles you may be driving and an acceptable driving record
• Ability to travel and commit to long term onsite projects

Hiring: Utility Project Manager – Data Center Infrastructure

Milwaukee WI (Onsite)

Start: ASAP | End: 3/12/2027 with possible extension

We are seeking an experienced Utility Project Manager to support large-scale data center infrastructure projects. This role will serve as the single point of contact for all utility-related scope, including transmission, distribution, and substations, supporting high-availability, mission-critical facilities.

Role Overview

The Utility Project Manager will lead scope, cost, schedule, quality, and safety for utility and substation work supporting data center developments. You will collaborate with internal energy teams, engineering, construction, utilities, and AHJs to ensure reliable, on-time energization of data center campuses.

Key Responsibilities

Scope & Stakeholder Management

• Act as Single Point of Contact for all utility and substation scope (transmission, distribution, substations)
• Lead weekly design and site coordination meetings with Energy, Engineering, Construction, Utilities, and AHJs
• Coordinate utility design reviews, approvals, and signoffs using Adobe Sign / DocuSign
• Manage design coordination using latest AutoCAD and BIM 360
• Develop and maintain responsibility matrices and stakeholder contact lists
• Track and manage utility agreements, easements, deeds, and ROW documentation to meet project schedules

Cost Management

• Establish and manage budgets, estimates, contingencies, and not-to-exceed values
• Track purchase orders and report funding status at defined milestones
• Ensure scope validation prior to work execution
• Manage all change orders and scope changes through formal change management processes

Schedule Management

• Develop and publish detailed utility and substation schedules
• Identify critical path activities and maintain zero-float logic
• Track long-lead equipment (LLE) delivery and on-site readiness
• Provide mitigation plans, recovery schedules, and cost impacts for delays
• Publish weekly progress reports with photos and milestone updates

Quality Management

• Conduct weekly site walks and pre-construction walkthroughs
• Verify substation civil and electrical work meets utility and data center standards
• Identify, document, and escalate quality issues proactively

Safety Management

• Champion safety as a core value on all data center sites
• Develop and submit Energization Safety Plans
• Lead pre-energization coordination walks with all stakeholders
• Review and coordinate Methods of Procedure (MOPs)
• Verify downstream scope completion prior to energization

Required Qualifications

• 10+ years of utility experience, including transmission, distribution, and substations
• Proven experience supporting data center or mission-critical infrastructure projects
• Bachelor’s degree in Engineering or Project Management (preferred)
• Strong knowledge of easements, ROW, and utility agreements
• Solid construction project management fundamentals
• Highly organized, adaptable, and comfortable working in fast-paced, high-visibility environments

Disqualifier: Candidates without direct utility experience will not be considered.

Ideal Candidate Traits

• Experience working in hyperscale or campus-style data center environments
• Strong coordination skills across internal teams, utilities, and AHJs
• Ability to manage ambiguity, tight schedules, and multiple stakeholders

Interested?

Apply now or reach out directly to learn more about this opportunity.

Dexian is a leading provider of staffing, IT, and workforce solutions with over 12,000 employees and 70 locations worldwide. As one of the largest IT staffing companies and the 2nd largest minority-owned staffing company in the U.S., Dexian was formed in 2023 through the merger of DISYS and Signature Consultants. Combining the best elements of its core companies, Dexian's platform connects talent, technology, and organizations to produce game-changing results that help everyone achieve their ambitions and goals.

Dexian's brands include Dexian DISYS, Dexian Signature Consultants, Dexian Government Solutions, Dexian Talent Development and Dexian IT Solutions. Visit to learn more.

Dexian is an Equal Opportunity Employer that recruits and hires qualified candidates without regard to race, religion, sex, sexual orientation, gender identity, age, national origin, ancestry, citizenship, disability, or veteran status.

Dexian | Unlock trajectory changing opportunities.

Unlock business potential with Dexian's comprehensive solutions. Discover staffing, talent development, and valuable resources. Explore now!

RB Royal, a family owned and operated manufacturing company based in Fond du Lac, WI, is looking for a motivated professional to join our team as a CNC Machine Operator!

RB Royal is a premium manufacturer of fluid transfer systems. Think custom coils, tubing and hoses that move water, air, oil and fuel. Our products support a wide range of industries including marine, automotive, construction, motor sports, agriculture, food processing medical, and power generation.

Shift

1st Shift: M-Th 5:00am-3:00pm

2nd Shift: M-Th 3:00pm-1:00am

Duties and Responsibilities

Reads and interprets blueprints, planning sheets, sketches and related technical data to determine tooling requirements, setup procedures, control settings and methods and sequences.

Enters computer program for parts to be run based on technical data supplied by drawing, engineering and other sources.

Selects and communicates type of tooling required for each job to be run.

Mounts, aligns and secures tooling, attachments and workpiece on machine.

Programs controller to run the parts as specified.

Uses statistical process controls to ensure quality production.

Adjusts setup and tooling as needed.

Loads new data in coordinate measuring machine and verifies product to blueprint.

Provides support for the job estimates and prototype development.

Participate in testing's and requesting new tooling.

Qualifications

Previous experience programming, setting up and operating CNC type machines preferred. Metalworking courses at a technical school preferred.

We Offer

Modern, clean, air-conditioned & safe work environment.

Competitive benefit package.

Paid holiday's.

Paid time off.

Paid Weekly.

Overtime Opportunities.

Promotion from within.

History of stable year-round work.

This is an on-site position, Monday- Friday. Per Diems will be provided for travel.

This role will be instrumental in developing and managing schedules, analyzing project performance, and driving proactive solutions to keep high-profile projects on track.

Key Responsibilities

• Lead the development and management of detailed project schedules using Primavera P6 (or similar scheduling software).
• Provide expert-level analysis on schedule performance, risks, and recovery strategies.
• Prepare executive-level reports and presentations for clients and senior leadership
• Oversee time-impact analysis, delay claims, and schedule mitigation planning.
• Collaborate closely with project managers, construction managers, and clients to ensure schedule alignment and transparency.
• Mentor and support junior schedulers and project team members.

Qualifications

• Bachelor’s degree in Construction Management, Engineering, or related field preferred.
• 8+ years of construction scheduling experience, with proven expertise in mission-critical projects (data centers strongly preferred).
• Advanced proficiency in Primavera P6 and other scheduling tools.
• Deep understanding of construction sequencing, methodologies, and resource planning.
• Strong communication and leadership skills, with experience advising senior stakeholders.

The Advanced Aortic Imaging for Clinical and Translational Research (AAI-CTR) lab at UW–Madison is hiring a Postdoctoral Research Associate to develop and validate next-generation imaging biomarkers for aortic disease. If you want your algorithms to change how patients are monitored and treated, not just generate papers (although there is plenty of that too), this is the role.

Why This Lab:

Our group has built several image analysis techniques that have completely changed how we view aortic disease. Specifically, vascular deformation mapping (VDM) is a technique that detects aortic deformation patterns invisible to conventional diameter measurement, and we are actively translating it from research tool to clinical product. Our work sits at the intersection of deep learning, image registration, and clinical decision-making, with active industry partnerships aimed at commercializing the methods we develop. Former trainees have moved into competitive industry positions, co-developed new IP, and gone on to train at other top-tier programs. This is a lab where technical innovation and clinical impact are not separate goals.

What You’ll Do:

Algorithm & Pipeline Development

• Design, train, and validate DL/ML models for aortic CT and MRI (segmentation, registration, shape/growth modeling, VDM pipelines).
• Build and optimize image-based pipelines for longitudinal aortic surveillance using large, multi-center datasets.
• Benchmark algorithms against clinical reference standards; lead external validation and reproducibility testing.

Clinical Translation

• Collaborate directly with cardiovascular surgeons, cardiologists, and radiologists to define clinically meaningful performance targets.
• Advance investigational tools toward real-world use: workflow integration, reliability testing, and documentation aligned with regulatory and commercial pathways.
• Apply novel analysis methods to large patient populations (UW and multi-center cohorts) to generate evidence that supports clinical adoption.

Data & Project Leadership

• Curate, organize, and manage large clinical imaging datasets and associated outcomes data.
• Mentor and collaborate with trainees across clinical, engineering, and physics backgrounds.
• Lead manuscript preparation, conference abstracts, and presentations; build your independent publication record.

Required Qualifications

• Ph.D. (or equivalent) in Biomedical Engineering, Electrical/Computer Engineering, Computer Science, Medical Physics, or a closely related quantitative field.
• Hands-on experience with medical image analysis on CT and/or MRI.
• Strong AI/DL skill set: proficiency in Python and common ML/DL frameworks (PyTorch, TensorFlow); experience training and evaluating models on large imaging datasets.
• Experience with core medical imaging tasks: segmentation, registration, or 3D model/shape analysis, transfer learning. Interest in deformation or longitudinal analysis is a plus.
• Track record of scientific productivity (peer-reviewed publications, conference papers) and strong written/oral communication.
• Genuine interest in clinical translation, meaning building tools clinicians will actually use, not just publishing methods papers.

Preferred

• Prior work with vascular or cardiovascular imaging (aorta, aneurysm/dissection, cardiac CT/MR).
• Experience with image registration or statistical shape/deformation modeling.
• Familiarity with database tools and good data engineering practices for imaging research.
• Comfort working in multi-disciplinary teams and collaborating closely with clinicians.
• Creative, independent problem-solving mindset: able to prototype, test, and iterate quickly.

Commitment & Environment

We are looking for someone who can commit to at least 18–24 months. Meaningful translational research takes time: developing a method, validating it rigorously, and publishing the results is not a short-term endeavor. In return, you will work in a highly collaborative environment spanning Radiology, Surgery, Cardiology, and Medical Physics at UW–Madison, with direct access to large clinical datasets and a PI who is invested in your long-term career trajectory.

Work Authorization

Candidates who already hold valid U.S. work authorization are preferred, including F-1 OPT and STEM OPT. We are open to sponsoring H-1B visas for exceptional candidates, though candidates who do not require immediate employer-sponsored work authorization will have an advantage given current processing timelines.