Engineering Jobs in Louisiana Remote

(USACE/NAVFAC Vertical Construction Projects)

Location: MCAS Yuma

Overview

Harper Construction is seeking an experienced Project Engineer for a large-scale military vertical construction project located at MCAS Yuma.

This role requires direct, relevant experience on ground-up vertical construction projects valued at $20 million and above. Candidates must have worked on complex federal building projects similar in size, scope, and compliance requirements.

Our military vertical portfolio includes:

• Aircraft Hangars
• Barracks
• Gymnasiums
• Headquarters Buildings
• SCIF (Sensitive Compartmented Information Facility) Secure Buildings

Responsibilities

• Responsible for the quality management duties, including quality of the works, material management, documentation, and close-out to ensure safe, quality, efficient, and effective project execution.
• Directs inspections, documents, and updates appropriate records quickly and accurately.
• Read specifications and resource documents to determine requirements and planning procedures.
• Responsible for leading and managing quality processes, including submittals, shop drawings, and as-builts.
• Creates and implements project-specific inspection and test plans and quality control plans.
• Perform the USACE three phases of control: Preparatory, Initial, and Follow-Up.
• Supports Site Safety to ensure that projects are completed in accordance with safety procedures.

Required Qualifications

• Minimum of 10 years’ experience as a Project Superintendent, QCM, or Project Engineer, on similar-sized and type construction contracts. (vertical construction valued at $20M+)
• At least two years’ experience as a Senior Project Engineer in construction.
• Must be familiar with the requirements of EM 385-1-1, and have experience in the areas of hazard identification, safety compliance, and sustainability.

Preferred Qualifications

• Experience working with USACE and/or NAVFAC is highly preferred
• Bachelor's Degree in Construction, Engineering, or a similar field
• Working knowledge of Procore document control system.

Compensation and Benefits

Salary: $125,000 to $145,000 annually (Compensation will be based on experience, skills, and qualifications.)

• Benefits package includes:
• 100% Company paid medical & dental ( we also cover 30% of dependent coverage)
• vision, life, and supplemental insurance
• 401(k) plan with company match
• Annual increases and discretionary bonuses
• Paid holidays and vacation time

Harper Construction Company provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Company Description

TD Construction Group is a growing heavy civil contractor based in Thibodaux, LA. We self-perform

nearly all aspects of subdivision and site development—sewer, drainage, water, mass earthmoving,

lime treatment, rock placement, and paving. Founded five years ago, we’re expanding and seeki

n

eay

civil, roadway, and utility projects from preconstruction through closeout. The ideal candidate is a strong leader with excellent organizational and communication

sklls

Role Desc

r

ct go
Qualific

a

tions Bachelor’s degree in Construction Management, Engineering, or related field. (Or +3

years
additional relevant construction project management experience in lieu of d

hedulerepo

mplex pro

emen, subcontractors, and supp

crete constru

erred
Pay/Ince

profit shAdvancement Opp

rtunities

We invest in employee development through regular reviews, clear performance benc

h

Job Summary

We are seeking a highly skilled Integrations Engineer to design, develop, and maintain integrations across our enterprise systems. This role will be responsible for building and supporting solutions in Azure API, Azure Data Factory, Master Data Management, SSIS, and SSRS, while also analyzing business requirements and ensuring scalable, cost-effective integration strategies. The ideal candidate will help reduce third-party vendor dependency by providing strong in-house technical expertise.

Key Responsibilities

• Lead end-to-end integration projects from design through delivery.
• Architect, develop, test, and implement complex real-time and batch integrations.
• Act as subject matter expert on integration design, architecture, and best practices.
• Analyze business data requirements and produce documentation including process flows, mapping documents, and data flow diagrams.
• Run and monitor software performance tests, troubleshoot issues, and optimize integrations.
• Collaborate with IT application owners, infrastructure teams, and business stakeholders to align solutions with business needs.
• Prepare and maintain detailed technical specifications and requirements.
• Support Agile development processes and contribute to sprint planning and execution.
• Manage multiple priorities and issues in a fast-paced environment.
• Ensure change control best practices are followed for proposed solutions.
• Document bugs, identify root causes, and provide actionable resolutions.
• Provide technical support for new initiatives and integration requirements.
• Escalate recurring issues reported by service partners.
• Perform additional duties assigned by leadership.

Qualifications

• Bachelor’s degree in Computer Science, Software Engineering, Information Technology, or related field.
• 5+ years of experience designing and leading system integrations in a mid-size enterprise environment.
• Proficiency in ETL and real-time integration with at least one ESB platform (Boomi, SSIS, Azure Integration Services).
• Strong experience with Azure API development, Node.js, React.js, CI/CD pipelines, and familiarity with SOAP and REST APIs.
• Hands-on experience with Azure Database for PostgreSQL.
• Strong knowledge of front-end and back-end programming languages (SQL, Java, HTML, .NET, scripting languages).
• Experience in Agile/Scrum environments.

Quality Control Manager

Location: Streator, Illinois

Industry: Manufacturing / Industrial Equipment

Compensation: 90k - 120k Base Salary + Bonus

A growing manufacturing operation in Streator, IL is seeking a Quality Control Manager to lead plant quality systems and ensure production standards across manufacturing operations.

This individual will oversee quality programs, inspections, and continuous improvement initiatives while partnering closely with production leadership to maintain high standards across the facility.

This role is ideal for a hands-on manufacturing quality leader who understands how to balance production demands with quality standards.

Key Responsibilities

• Lead all plant quality control and assurance programs

• Oversee inspection processes across manufacturing operations

• Develop and maintain quality standards, documentation, and procedures

• Conduct internal audits and ensure compliance with regulatory and industry standards

• Investigate root causes of quality issues and implement corrective actions

• Partner with production and engineering teams to improve manufacturing processes

• Manage and mentor quality technicians and inspectors

• Track quality metrics and drive continuous improvement initiatives

Qualifications

• 3+ years of quality experience in a manufacturing environment

• Prior leadership or supervisory experience within a quality department

• Strong knowledge of quality management systems and manufacturing processes

• Experience with inspections, audits, root cause analysis, and corrective actions

• Ability to work cross-functionally with production and engineering teams

• Bachelor’s degree in Engineering, Manufacturing, or related field preferred

Why This Opportunity

• Leadership role within a growing manufacturing operation

• Opportunity to build and improve plant quality systems

• Work directly with plant leadership and production teams

• Stable manufacturing environment with long-term growth potential

At Makita USA, we believe our employees are the driving force behind our success. That’s why we offer a competitive and comprehensive benefits package to support your health, financial well-being, and professional growth. When you join Makita, you become part of a dynamic, innovative, and team-oriented culture that values hard work and dedication.

Makita is a worldwide leader in the professional power tool industry. Over the past 100 years, we have built a reputation for using the finest raw materials, the most advanced manufacturing equipment, and the most rigorous quality testing in the industry. Headquartered in La Mirada, CA, Makita U.S.A., with offices in Reno, NV, Wilmer, TX, and Flowery Branch, GA, has brought Makita's best-in-class engineering advantage to professional power tool users in America since 1970.

Salary $85,000 - $100,000 annually

Job Summary

Makita is the innovation leader in power tools, equipment, and accessories – so join the team at our U.S.A. headquarters in Southern California and help us make the Makita Advantage come alive at trade shows and events across the U.S.A.

As the Trade Show Manager, you will take a leading role in planning, coordinating, and executing trade shows and events to reach our target audiences, including pro-contractors, hardware dealers/distributors, and the media. You will help communicate the Makita Advantage to these audiences by creating and executing event plans that include compelling signage and graphics, hands-on product demonstrations, dynamic display structures, efficient lighting, effective lead collection, and more.

Areas of focus will range from budget and calendar planning to asset co-design and sourcing, inventory management, and hands-on activity, including booth set-up and on-site management at select events.

Across categories, Makita products have leading power and performance but with lower noise, less vibration, reduced weight, and superior ergonomics. This combination of performance and comfort is unique in the category, giving users of all types – from pro contractors to DIYers – a complete solution that helps get work done faster and more efficiently. Join our team and be a part of this exciting innovation story.

Essential Job Duties

• Work with the senior communications manager as well as product management, channel marketing, brand marketing, operations, and senior management on a full range of trade show activities. This will include live trade shows in major convention venues.
• Build the annual Makita U.S.A. trade show calendar and budget.
• Work with our off-site logistics partner to manage and track asset inventory and display tool inventory for use at trade shows. This includes inspection and inventory reconciliation as well as routine maintenance and repairs.
• Collaborate with in-house marketing staff and vendors to build booth assets, including structures and signage.
• Work with the in-house product management team (and occasionally outside vendors) to create demonstrations of key Makita products.
• Create effective lead collection tactics at trade shows.
• Coordinate show orders and shipping for select events.
• Coordinate on-site details for select events, including shipping and receiving, staffing, and set-up.

Other Duties

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Skills Required

• Familiarity with best practices in trade show booth construction, including lighting and graphics.
• Basic inventory management of trade show assets.
• Building and managing a budget.
• Post-event actions, including reviewing and approving show invoices.
• Strong ability to proactively coordinate numerous projects while maintaining follow-up and follow-through skills.
• Strong attention to detail.
• Ability to calculate figures and amounts such as discounts, percentages, and area. .
• Ability to read, analyze, and interpret general business periodicals, technical procedures, or trade show regulations.
• Ability to write reports, business correspondence, and procedure manuals (e.g., booth set-up instructions).
• Ability to effectively present information and respond to questions from groups of managers and vendors.
• Ability to learn: Obtain knowledge and understanding of our power tools, competition, target professional users, the product applications, and the types of dealers that support the users.
• Presentation skills: Organize information and present to both internal and external audiences.
• The ability to work under pressure and with constantly changing priorities
• Experience in executing a trade show booth “from the ground up”, including arranging shipping and on-site booth set-up, as well as ordering and tracking on-site show services.

Supervisory Responsibility

This position does not have supervisory responsibilities.

Work Environment

This position is based full-time in the Makita U.S.A. Home Office in La Mirada, CA.

EVENTS: This position will include indoor and outdoor events. The work environmental characteristics for these events include the following:

• The employee may be exposed to moving mechanical parts and outside weather conditions.
• In rare instances, activity goes into the night and proceeds until completion, rain or shine.
• The employee is occasionally exposed to fumes or airborne particles, as well as risk of electrical shock and vibration. Personal protective equipment is provided, and professional labor is on hand to manage advanced electrical applications.
• The noise level in the work environment is usually moderate. At select trade shows, noise levels are similar to a construction job site. Hearing protection is provided.

Education and/or Experience Desired

• Five to ten years of related trade show and event experience in venues including convention halls.
• Experience in executing a trade show booth “from the ground up”, including arranging shipping and on-site booth set-up, as well as ordering and tracking on-site show services.

Travel: The expected travel for this role is up to 15%.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

• The employee is regularly required to stand, walk, use hands to handle or feel, reach with hands and arms, and talk or hear. The employee is frequently required to sit and stoop, kneel, crouch, or crawl. The employee is occasionally required to climb or balance.
• The employee must regularly lift and /or move up to 20 pounds, frequently lift and/or move up to 40 pounds, and occasionally lift and/or move up to 50 pounds.
• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus.
• The employee must be able to safely operate a moving vehicle per our company policy.
• Occasional extended hours are expected to complete assembly or take-down activities on-site during trade shows and events, as well as in the office.

Our Benefits Include:

Health & Wellness

• Medical, Dental, and Vision insurance options after 30 days of employment
• Flexible spending accounts (FSA) & Health Savings Accounts (HSA)
• Employee assistance program (EAP) for mental health and well-being
• Paid subscription to Headspace and 5 other members of your choice

Financial Security

• Competitive pay & performance-based incentives
• 401(k) retirement plan with company match
• Basic Term Life insurance is 100% company paid
• Long-term Disability Coverage 100% company paid
• Disability Coverage
• Voluntary Coverage: Critical illness, accidental, hospital indemnity, whole life, and supplemental life plans.

Work-Life Balance

• Paid time off (vacation, sick leave, and 13 paid holidays)
• Employee discounts on Makita tools and accessories - because we know you love quality tools!

Join Makita USA and power up your career with a company that values innovation, teamwork, and excellence!

Explore Opportunities & Apply Today!

Disclaimer:

This description is based on management's assessment of the requirements and functions of the job as of the date this description was prepared. It is a general guideline for managers and employees, but it does not intend to be an exhaustive list of all of the elements of the job. Management reserves the right to modify the description at any time, or to vary the duties and responsibilities of the job on a temporary or indefinite basis to meet production, scheduling, or staffing needs.

Equal Opportunity Statement:

The Company is an equal opportunity employer and makes employment decisions based on merit. Company policy prohibits discrimination based on race, color, creed, sex, religion, marital status, age, gender, national origin, ancestry, physical disability (including HIV and AIDS), mental disability, veteran status, military service, pregnancy, childbirth or related medical condition, genetic information, medical (including genetic characteristics or cancer diagnosis), actual or perceived sexual orientation, or any consideration protected by federal, state or local laws. All such discrimination is prohibited. Additionally, the Company will provide registered domestic partners with all rights and benefits as required by Law. The Genetic Information Nondiscrimination Act of 2008 (GINA) prohibits employers from requesting or requiring genetic information of an individual or a family member of the individual. The Company is committed to complying with all applicable laws and providing equal employment opportunities.

As a Material Compliance Engineer at Cinch Connectivity Solutions (Bel Fuse), you will play a critical role in ensuring our products meet all relevant environmental, legal, and safety regulations regarding material usage. You will drive compliance initiatives across the product lifecycle, collaborate with cross-functional teams and suppliers, and proactively monitor global regulatory requirements. Leveraging your expertise in compliance management systems and regulatory frameworks, you will help safeguard product integrity, support sustainability efforts, and contribute to the continuous improvement of compliance processes throughout the organization.

Are You Looking to:

• Work with engineering, manufacturing, marketing, purchasing and quality assurance teams to ensure new and existing products comply with material standards.
• Compile, analyze, and manage data on material content using excel databases and internal operating systems.
• Create and maintain compliance documentation, review materials, and handle submissions to customers.
• Help develop and maintain internal policies and procedures for material compliance.
• Monitor and interpret global regulatory requirements (e.g., WEEE, TSCA, IMDS, EU, Asia-Pacific, Americas) and ensure company products comply with all applicable standards.
• Support sustainability initiatives and assist in preparing environmental impact reports and disclosures as required by corporate and regulatory standards.
• Identify opportunities for process improvement and automation within compliance workflows to enhance efficiency and accuracy.
• Maintain up-to-date knowledge of evolving regulatory standards through horizon scanning; provide training and guidance to internal stakeholders on compliance requirements.
• Demonstrate advanced proficiency in compliance management software, ERP, and PLM systems (e.g., Assent, GreenSoft, SAP).
• Represent the company in industry forums, regulatory meetings, or customer engagements regarding materials compliance topics.

Are You Ready to:

• Interpret federal and international product compliance regulations (RoHS, REACH, PROP65, CMRT, SCIP Database).
• Take corrective action for non-compliant products.
• Collaborate with suppliers on discrepancies or non-compliance.
• Conduct supplier audits and assessments to verify material compliance; lead corrective action processes for discrepancies or non-compliance.
• Lead compliance-related projects and mentor junior team members to promote best practices across the organization.
• Participate in cross-functional teams to address compliance challenges and drive continuous improvement.
• Assist with internal and external audits related to product and materials compliance.
• Engage in continuous learning regarding related compliance topics.

What You’ll Need:

• Bachelor’s degree in Environmental Science, Materials Science, Engineering, or equivalent experience.
• 3 plus years relevant experience working in a manufacturing setting.
• Demonstrated experience in interpreting regulatory frameworks and delivering clear, actionable guidance on compliance requirements, with a focus on RoHS, REACH, Prop 65, CMRT, SCIP Database, and related standards.
• Willingness and flexibility to travel domestically up to 10%, as required by management.
• Must be a US Citizen or Permanent Resident.

What You’ll Get:

• Compensation range: $75,000 – $90,000
• Participation in the annual bonus program
• 401K and company match
• Medical, Dental, Vision
• Health Savings Account (HSA)
• Flexible Spending Account (FSA)
• Company Life Insurance
• Short & Long-term disability
• Paid Time Off (e.g., Vacation Benefits, Company Holidays, Sick Leave Benefits, Personal Days)
• Pet Insurance
• Tuition Reimbursement 

To review a full listing of our benefits, please refer to the 2026 Bel Fuse Benefits Summary and Paid Time Off Benefits, or by visiting the Bel Fuse Careers page. 

Work Opportunity

Bel will only employ those who are legally authorized to work in the United States.  This is not a position for which sponsorship will be provided.  Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.

Equal Opportunity Employer

Bel is an Equal Opportunity employer.