Engineering Jobs in Birchrunville, PA

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio.  IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers.

Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business.

The Level B Fleet Mechanic/Technician is a journeyman-level role responsible for independent diagnosis and repair of most mechanical, electrical, and hydraulic issues on refuse trucks, heavy trucks/tractors, trailers, and heavy equipment. This role also mentors Level C technicians, supports road calls, and ensures high uptime and DOT compliance for the fleet.

• Diagnostics & Repair

  • Independently diagnose and repair:
    • Diesel and gasoline engines (intake, fuel, cooling, aftertreatment/emissions components).
    • Drivetrain components including clutches, transmissions, differentials, PTOs, and drive lines.
    • Air and hydraulic brake systems, ABS, and suspension components.
    • Hydraulic systems on refuse equipment (packer bodies, arms, cylinders, pumps, valves, and hose routing).
    • Electrical systems including starting/charging, multiplex wiring, sensors, and lighting.

   

  Preventive Maintenance & Compliance

  • Perform and sign off on DOT-compliant inspections and PMs, ensuring all safety-critical items are addressed and documented.
  • Accurately interpret and close out DVIR/eDVIR defects; communicate recurring defects to leadership for root-cause analysis.
  • Use OEM and aftermarket diagnostic software, service bulletins, and wiring schematics to troubleshoot complex issues.

   

  Road Calls & Operational Support

  • Respond to road calls and breakdowns throughout the NYC tri-state area; perform safe temporary or permanent repairs to return vehicles to service or coordinate towing as needed.
  • Communicate clearly with dispatch, supervisors, and drivers on repair status and estimated completion times.

   

  Mentorship, Training & Documentation

  • Guide and mentor Level C technicians on best practices, safety, troubleshooting, and proper repair methods.
  • Complete work orders thoroughly, capturing complaint, cause, correction, labor hours, and parts used.
  • Support continuous improvement initiatives for PM compliance, repeat repair reduction, and parts standardization.

• High school diploma or GED required.
• 3–5+ years hands-on experience as a diesel, truck, or heavy equipment mechanic/technician, including diagnostics and major component replacement.
• Valid CDL Class B (or higher) with air brake endorsement strongly preferred to perform road tests and move equipment on public roads within NY/NJ/CT.
• Demonstrated proficiency with hydraulic, pneumatic, and electrical systems.
• Ability to read and interpret OEM service manuals, wiring diagrams, and hydraulic schematics.
• Experience in refuse/solid waste, municipal, or LTL/heavy trucking fleet operating in urban environments preferred.
• ASE certifications in Medium/Heavy Truck (T series) or Truck Equipment (E series); working toward Master status preferred.
• Basic welding and cutting skills (MIG, stick, torch) for brackets, hangers, and minor body fabrication preferred.
• Familiarity with computerized fleet maintenance and parts inventory systems preferred.

This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. 

Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.  

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. 

Location: Remote: Reside close to (Exton, PA)

Portfolio: Allen‑Sherman‑Hoff (ASH) Engineered Material‑Handling Systems (ANDRITZ)

About the Role

Allen‑Sherman‑Hoff (ASH), an ANDRITZ business, delivers engineered material‑handling systems that support power generation, biomass, and pulp & paper facilities operating in demanding, continuous‑run environments. Although ASH is technically an OEM, we operate far more like an A&E/EPC engineering firm: we deliver system‑level engineered solutions, integrating ASH proprietary equipment with structural, mechanical, electrical, and quality requirements to meet strict performance expectations.

We are seeking a Project Manager with power, energy, utilities, or EPC/A&E engineered‑systems project experience, someone who has led large, customer‑facing technical projects through engineering, fabrication, manufacturing, quality, and site support.

If your background is in internal manufacturing operations, IT/telecom deployments, or continuous improvement, this role is not a match. We need a PM who understands industrial plant environments, engineered equipment, and the rigor of technical project delivery.

What You Will Do

Lead Full Lifecycle Execution (Sales Handover → Final Turnover)

• Own the delivery of engineered ASH material‑handling systems across power, biomass, and pulp & paper facilities.
• Drive engineering, drafting, and calculation packages to meet scope, schedule, and contractual requirements.
• Coordinate and unblock fabrication/manufacturing, ensuring manufacturability and compliance.
• Manage supplier RFQs, subcontractor performance, expediting, and logistics.

Quality & Technical Documentation Leadership

• Manage ITPs, weld maps, NDE requirements, pressure tests, dimensional checks, and documentation packages essential to engineered‑equipment delivery.
• Validate compliance to ASME/AWS, customer specifications, and ASH quality standards.

Schedule, Cost, and Risk Management

• Maintain schedule baselines using Primavera P6.
• Oversee cost performance, margin drivers, change control, and contract compliance.
• Identify and mitigate technical and execution risks early.

Customer‑Facing Project Leadership

• Serve as the primary interface between the customer and ANDRITZ technical teams.
• Prepare and deliver technical and commercial progress reports.
• Support site activities (FAT, readiness reviews, installation coordination, commissioning support).

What You Bring

Required

• Experience in A&E/EPC, power generation, utilities, or industrial engineered‑systems delivery.
• (Examples: material handling, conveying systems, rotating equipment, mechanical process systems, boiler/balance‑of‑plant equipment).
• Proven ability to lead engineering‑heavy, customer‑facing projects with strict contractual and QA requirements.
• Hands‑on coordination with engineering, fabrication, manufacturing, quality, suppliers, and field service.
• Experience managing ITPs, weld maps, NDE, pressure tests, QA documentation, and technical turnover packages.
• Proficiency in Primavera P6 and Oracle or similar ERP.
• Bachelor’s degree in Engineering/Construction Management OR 5+ years of relevant engineered‑systems PM experience.

Preferred

• Power plant, utilities, biomass, or pulp & paper industry experience.
• Background in ash handling, bulk material handling, or mechanical systems integration.
• PMP or CAPM certification.
• Experience with retrofit, outage, upgrade, or brownfield scopes.

Work Model

• Remote with periodic travel to Exton, PA, fabrication shops, and customer facilities for inspections, FATs, readiness reviews, and site support.
• Travel expected but varies by project phase.

Why This Role Matters

Your work directly affects the reliability, uptime, and environmental performance of major industrial facilities. When you execute well, a power plant runs cleaner, a pulp mill avoids downtime, and a customer sees ASH as a trusted engineering partner. This is real engineering impact, not back‑office project tracking.

*All qualified applicants will receive consideration without regard to protected characteristics.

Design and Mechanical Engineer – Medical Devices

Join a global leader medical device company. Design and manufacture technology used in spine and orthopedic surgeries

You will work on the design and development of surgical implants and instruments, collaborating with engineers, surgeons, and cross-functional teams to bring innovative products to market.

Full‐time | W2 | M-F 8am- 5pm | On site Audubon PA (outside of Philadelphia)

Qualifications

• 4+ years of mechanical and medical device design engineering experience.
• II and III medical device experience
• Experience with CREO or SolidWorks for mechanical design and documentation.
• Experience working within regulated environments (ISO 13485 / FDA).
• Ability to work in both engineering and clinical environments, including operating rooms and labs
• Bachelor's degree in Mechanical Engineering, Biomedical Engineering, Bioengineering, or related field.

Benefits:

Visa sponsorship supported within US

W2 contract

Audubon, PA (outside Philadelphia)

Bonus for relocation within US and annual bonuses

Work directly with surgeons

Full product development lifecycle exposure

Key Responsibilities

Product Development

• Lead the design and development of surgical instruments and implants using CAD software (CREO).
• Develop and maintain project plans and FDA-compliant Design History Files (DHF).
• Perform design verification and validation to ensure designs meet technical specifications.
• Manage assigned projects to ensure timely completion while maintaining compliance with regulatory requirements.
• Collaborate with internal prototype teams and external vendors for rapid prototyping and testing.
• Support preparation of regulatory submissions to the FDA.

Customer Engagement

• Work directly with surgeons and clinical users to gather product feedback and translate clinical needs into design requirements.
• Participate in product launches, sales training, and customer visits.
• Support surgical cases in the operating room to observe device performance and identify opportunities for improvement.

Cross-Functional Collaboration

• Partner with marketing and product management to develop market strategies and forecasts.
• Collaborate with operations and manufacturing to support production and commercialization.
• Conduct competitive and industry research to ensure innovative product development.

Product Lifecycle & Sustaining

• Support the lifecycle management of commercialized products.
• Drive design improvements, cost reduction initiatives, and engineering changes.
• Work closely with Quality, Regulatory, Manufacturing, and Supply Chain teams to ensure product performance and compliance.

The IN group is here to support you specifically with the recruitment and hiring process for job opportunities. Our role is focused on guiding you through these steps. If you have any questions related to your application or next steps in the hiring process,

Apply, and please feel free to reach out.

Ainsley Search Group is hiring a Plant Engineering Manager with solid experience in plant engineering and maintenance management for a High Growth Manufacturer located in Chester County. This Plant Engineering Manager will report to VP of Operations, lead and develop a maintenance and engineering team and plan, optimize PM, optimize plant reliability and equipment performance output, further promote plant safety, and reliability, oversee the life cycle of major plant engineering projects. This is a full-time, permanent opportunity with lucrative compensation, bonus, benefit and growth.

Responsibilities:

• Lead, manage, mentor, and develop a plant engineering team, plan staffing outlook for maintenance and engineering team based on operational demand and make decision on hiring, training, etc.
• Report to VP of Operations and collaborate with cross functional teams to develop and implement a facility maintenance system, drive PM, reliability, process improvement on safety.
• Lead life cycle of major plant expansion, capital projects, oversee plant engineering projects design, execution, commissioning, close-out, manage contractor, equipment manufacturer, suppliers’ quality, performance and support contractor and supplier selection and qualification process.
• Develop, implement, and standardize maintenance practice, procedure and process across organization, plan and optimize resource for predictive and preventive maintenance, lead and manage plant maintenance programs, oversee equipment inspections, support safety and reliability training to optimize overall plant safety, reliability, and efficiency.
• Manage budget, cost and budget planning for all plant engineering projects, maintenance programs, identify area of cost saving opportunities and drive cost saving initiatives.
• Lead the security, sanitation, janitorial, utility, and property management programs across plant, create and maintain master site plan and collaborate with safety and EHS to ensure compliance with OSHA, GMP and EHS regulations.
• Collect, analyze maintenance data, KPI and operational data to track, monitor up-time, down-time performance on plant systems such as chiller, HVAC, condensate systems, plant steamer, etc, identify root causes and opportunities of improvement, further achieve higher efficiency, accuracy, cost saving on equipment performance output.
• Collaborate with EHS, Reliability Engineer, Project Engineer to support new capex investment, installation, commissioning, upgrade, routine maintenance, repair, and upgrade.
• Collaborate with Process, Quality, Reliability engineering and senior management, based on operational data, analysis to support CI, sustain and promote process safety, equipment reliability, and optimize operational output.
• Collaborate with executive management team on strategic planning regarding plant expansion, major capex investment, maintenance program, etc.
• Lead the new plant site design, development projects from start to finish, develop and modify new plant layout and expanded layout for existing plant facility.

Qualifications:

• Bachelor’s Degree in technical degree is a plus, higher education desired.
• Recent years of tenure as a hands-on senior leader as Plant Engineering Manager, or related roles within manufacturing industry, expose to high yield, fast speed automated manufacturing environment required.
• Hands-on leadership skill, ability to establish rapport and hold subordinates accountable, ability to restructure and develop a team.
• Strong analytical and problem-solving skill, strong knowledge in Project Management skill.
• Strong mindset in process improvement, process safety and reliability, ability to make difficult decision independently.
• Proficient in Microsoft Suite, CMMS and ERP based systems.
• Aspiration to advance to senior management level

Compensation and Benefit:

• Lucrative compensation
• Yearend bonus
• 401k with match
• PTO
• Paid Holidays
• Health, dental and vision
• Life Insurance
• Disability Insurance
• Tuition Reimbursement
• Relocation Assistance

This position is open from junior to senior levels for candidates with expertise in machinery mechanical design. Don’t hesitate to apply!

Join Us at a Pivotal Moment of Growth

[Doosan Robotics X ONExia] is experiencing an exciting transformation. As a leader in robotic solutions with standard products for palletizing and packaging applications using Robot Arms, we're experiencing rapid expansion and scaling our impact across industries. Our cutting-edge systems—from advanced palletizing and case packing to carton erecting and conveyor solutions—are transforming operations for companies across North America, and we need passionate engineers to fuel our next phase of growth.

The Opportunity

As one of our Mechanical Engineers, you'll be the creative force behind breakthrough automation solutions. You'll take customer concepts and transform them into sophisticated automated machines that solve real-world industrial challenges. This role combines engineering expertise with inventive problem-solving, offering the perfect opportunity for engineers who love bringing innovative ideas to life.

What Your Days Will Look Like:

• Design Work: Spend most of your time doing what you love—creating innovative machine designs using SolidWorks
• Hands-On Work: Get your hands dirty building prototypes, testing concepts, and working directly with the machines you design
• Project Management: Guide projects from concept through completion, ensuring your designs meet customer goals and timelines
• Collaboration: Present your designs to customers and teammates, sharing ideas and refining solutions together

Job Requirements

• B.S. in Mechanical Engineering with 3+ years of hands-on machine design experience
• Understanding of industrial components inside and out—bearings, motors, sensors, gearboxes, and how they work together
• Knowledge of materials, coatings, and machining processes for fabricated parts
• Ability to develop comprehensive machine layouts and specify the right components for each application
• Strong capability to create fabrication and assembly drawings.
• Solidworks experience
• Experience with robots
• Strong attention to detail
• Good communication skills to present design to customers and co-workers
• Strong capability to create fabrication and assembly drawings.

Ready to Be Part of Something Growing?

We're building something special at "Doosan Robotics X ONExia", and we'd love for you to help us do it. If you're ready to combine technical expertise with meaningful customer relationships while growing your career alongside our expanding company, let's talk.

Additional Details:

• Location: Exton, Pennsylvania (750 Springdale Dr, Exton, PA 19341)
• Schedule: Monday-Friday, 8-hour shifts
• Travel: 5-10% (occasional customer sites)
• Benefits

- 401(k)

- 401(k) matching

- insurance (Health, Life, Vision, Dental)

- Flexible schedule

- Paid time off

[Doosan Robotics X ONExia] welcomes applications from all qualified candidates and is committed to creating an inclusive workplace where everyone can contribute their best work.

[Doosan Robotics X ONExia] is an equal opportunity employer committed to creating an inclusive workplace where diverse perspectives drive innovation.

Project Manager

Compensation Range: $90k - $160k/yr

Exact compensation may vary based on skills, experience and location

Featured Benefits

• Medical insurance
• Vision insurance
• Dental insurance
• 401(k)
• Disability insurance
• Student loan assistance
• Paid maternity leave

About Us

Concrete Strategies Inc. (CSI) is a full-service national concrete contractor with the in-house resources and expertise to safely self-perform a wide variety of commercial construction including all aspects of cast in place concrete, precast erections, and concrete restoration. CSI began as Clayco Tilt-Up in 1988. In 2005, our services expanded, and we re-branded the company to showcase the additional offerings. Our 30 years in the business have enabled us to learn and refine our craft to meet the current market needs.

Why Concrete Strategies?

We provide the integrated services our clients expect, achieving Construction Success through:

• Economical Pricing

• Safe Jobsites

• Efficient, On-time Delivery

• High-quality, Innovative Results

National Presence

SEATTLE – PHOENIX - KANSAS CITY - ST. LOUIS - PENNSYLVANIA - DES MOINES

Engineering News Record Rankings

#8 Top 20 Firms in Concrete

#102 Top 600 Specialty Contractors

#26 Midwest Specialty Contractors

#3 Midwest Top Specialty Contractors by Sector – Missouri

#2 Midwest Top Specialty Contractors by Sector – Concrete

About the Job

The Project Manager will be based in the state of Washington. This position serves as the overall Project Leader for the jobs in which they are involved. Responsibilities range from project set up, project buy out, contract execution and compliance, material and equipment procurement, daily progress tracking, Project safety compliance, material and equipment invoice approval, manpower timesheet approval, responsible for project sequencing and scheduling, maintaining and updating schedules, coordination and communication with GC, extra work and change order distribution/tracking, coordination with Operation managers to secure adequate manpower, weekly cost report job forecasting, overall project fiscal responsibility.

Specific Role Responsibilities:

• Contract/Scope review and execution.
• Project safety compliance
• Job cost spread and estimate review
• Project sequencing and scheduling
• Project quantity/progress tracking
• Project cost reporting
• Invoice coding and approval
• Material/equipment procurement
• Change order request issuance/tracking
• Develop basic change order estimate pricing
• Coordination with GC/Owner
• Coordination with CSI Operations manager regarding manpower/resources

Requirements

• 5+ years of experience
• Bachelor’s degree in Construction management or Engineer recommended.
• Strong knowledge of construction principles/practices required
• Excellent problem-solving skills, with an adaptable and flexible style in working with all types of individuals
• Project set up, budget planning, buy out, and cost reporting experience is a must
• Good understanding of critical path scheduling.
• Experience leading successful project team, including development of employee and maintaining relationships with external entities
• Energetic and highly motivated with a strong sense of urgency
• Highly entrepreneurial and self-motivated, with the ability to work equally well on own as well as in a team environment.
• Ability to walk the job site, climb ladders, and multi floor scaffolding.

The Company is an Equal Opportunity Employer. The Company hires individuals on the basis of their qualifications and ability to complete the essential requirements and responsibilities of the job to be filled. It is our policy to grant equal employment opportunities to qualified persons without regard to race, color, national origin, sex, sexual orientation, gender identity/gender expression, religion, pregnancy, parental status, marital status, age, veterans’ or military status, regardless of how discharged, or physical or mental handicap or disability, genetic information, or other classification protected by applicable federal, state or local laws. The Company will provide equal opportunities in employment and take affirmative action as necessary in all aspects of the employment relationship, including without limitation, recruiting, hiring, compensation, promotion, working conditions, benefits and all other privileges, terms and conditions of employment. All employment decisions are made based on availability, qualifications, ability, merit and/or other legitimate factors consistent with principles of equal employment. This position is a safety sensitive position for purposes of state and federal law.

Who We Are

As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute.

Total Rewards

Constellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.

Expected salary range of $139,500 to $155,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k).

Primary Purpose of Position

Demonstrates mastery of skills and extensive subject matter knowledge in carrying out assignments associated with the analysis, design, development, implementation, evaluation, and proposed modification of plant specific nuclear licensed Operations training programs.

Primary Duties and Accountabilities

• Drives the clean energy center (CEC) and personnel performance improvement through the use of training. Coordinates, and conducts performance-based operations Reactor Operator (RO)/Non-Licensed Operator (NLO) training programs as required by user community in accordance with Constellation's systematic approach to training model, department procedures, and with proper application of the analysis, design, development, implementation, and evaluation phases.
• Assures the training programs are maintained current and incorporate information gained from Institute of Nuclear Power Operations (INPO) Significant Operating Experience Reports and Constellation Nuclear Event Reports (NERs), Nuclear Regulatory Commission (NRC) Bulletins and Information Notices, CEC design change and backfit information, CEC procedure changes and revisions, new regulations, and training effectiveness reports.
• Prepares trainee examination and conducts trainee evaluations for classroom, laboratory, OJT, and simulator environments, as appropriate and conducts counseling sessions for trainees, evaluates the results, and recommends/develops individualized training programs.
• Support CEC and fleet in the areas of business initiatives, project management, refuel outage support, emergency preparedness duties, and special projects.
• Participates in NRC, INPO and management audits, and prepares responses to audit findings.
• Maintains knowledge of plant operations, disciplinary skills and techniques, commensurate with the responsibility to develop and conduct effective, high-quality training.
• Supervises the collection and maintenance of auditable training records and reports required to document training program activities.
• Must achieve Senior Reactor Operator (SRO) certification within 18 months of assuming the position.
• Perform other job assignments and duties as directed by management or pursuant to company policy, including but not limited to emergency response, departmental coverage, call outs, and support of outage activities in positions outside the department.

Minimum Qualifications

• Previous Equipment Operator with 6 years of related (e.g. test reactor, commercial, industrial, or military power plant operator) experience OR
• Associate's degree in technical discipline, education, or training with 4 years of nuclear technical background or 6 years of related (e.g. test reactor, commercial, industrial, or military power plant operator) experience OR
• Current or previous licensed Reactor Operator or SRO certification with 4 years of related (e.g. test reactor, commercial, industrial, or military power plant operator) experience OR
• Bachelor's degree in engineering (chemical, civil/structural, electrical, industrial, mechanical or nuclear) or related science, education or training with 3 years of nuclear technical background or 4 years of related (e.g. test reactor, commercial, industrial, or military power plant operator) experience OR
• Current or previous SRO license
• The requirements as outlined above meet or exceed ANSI/ANS-3.1-2 Standard, "Selection, Qualification, and Training of Personnel for Nuclear Power Plants"
• Maintain minimum access requirement or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties

Preferred Qualifications

• Experience in commercial nuclear training
• Knowledge of and experience with the systematic approach to training (SAT)

Kelly Science is seeking a Regulatory Specialist for a contract-to-hire opportunity with a growing client located in Exton, PA.

Compensation: $90,000-99,000/year

Travel: up to 5% (Domestic & International)

Work Model: Onsite with potential for 1 day remote

Responsibilities:

• Serve as subject matter expert for chemical, disinfectant, and antimicrobial products.
• Develop and execute global regulatory strategies for product lifecycles and market expansion.
• Prepare and submit regulatory filings prior to agency submission.
• Manage EPA reporting, FDA annual volume reporting, and state registrations/renewals.
• Review product labels, maintain Safety Data Sheets (SDS), and provide regulatory input on new formulations.
• Act as the primary point of contact for regulatory inquiries, audits, and inspections.
• Monitor changing domestic and international laws, reporting impacts to senior leadership.

Qualifications:

• Bachelor's degree in Chemistry, Biology, Microbiology, or a related scientific field.
• 5–8 years in regulatory affairs or compliance within the Pharmaceutical, Biotech, or Medical Device industries.
• Deep knowledge of EPA and FDA processes. Experience with biocidals or disinfectants is a major plus.
• High attention to detail, proficiency in MS Office, and the ability to manage complex, shifting priorities.

Interested? Please apply today for immediate consideration!

Join Us at a Pivotal Moment of Growth

[Doosan Robotics Americas & ONExia] is experiencing an exciting transformation. As a leader in not only Cobot but robotic solutions with standard products for palletizing and packaging applications, we're experiencing rapid expansion and scaling our impact across industries. Our cutting-edge systems—from advanced palletizing and case packing to carton erecting and conveyor solutions—are transforming operations for companies across North America, and we need passionate engineers to fuel our next phase of growth.

The Opportunity

Do you want to work on cutting-edge collaborative robots (Cobots) that redefine automation across industries? At Doosan Robotics, our multidisciplinary team of R&D experts, engineers, and technicians collaborates to create a new era of robotics—robots that work right beside us.

We are looking for an experienced, detail-oriented, and self-motivated Cobot Application Engineer to join our team and work directly at customer sites.

Responsibilities

• Perform on-site review and analysis for robot applications.

(Analyze Cobot logs and provide troubleshooting support to resolve customer issues)

(Provide both Hardware(HW) and Software(SW) service support for Cobots)

(Inspect equipment to identify damaged or faulty parts)

• Manage service tickets through the service portal (Zendesk).
• Perform Cobot repair services and Manage after-market(AM) parts.
• Manage and maintain service facilities, tools, and equipment.
• Deliver product and technical training.

Job Requirements

• Associate’s degree in a related field (Robotics, Mechatronics, Mechanical Engineering, Electrical Engineering, etc.)
• 3+ years of experience in automation field, especially with: system integrators / Robot or Cobot manufacturers
• Hands-on experience in one or more of the following:

(Automation project management / Implementation of specific robot applications / Robot programming)

• Experience handling customer issues directly or indirectly
• Flexibility and willingness to travel as required (30~50%)

Preferred Qualifications

• Experience as a Robot Application Engineer or Technical Project Manager in an industrial environment.
• Experience using 3D simulation tools (RoboDK, Emulator 3D or similar tools)
• Understanding of industrial communication protocols for automation systems.
• Experience planning or delivering training and service programs, or operating technical training courses.
• Bachelor's degree in a related field
• Fluency in Spanish

Additional Details:

• Location: Exton, Pennsylvania
• Schedule: Monday-Friday
• Travel: 30-50% (occasional customer sites)
• Compensation Range:
• Benefits:
• 401(k) & 401(k) matching
• Insurance (Health, Life, Vision, Dental)
• Flexible schedule
• Paid time off

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.