Engineering Journal Scimago Jobs in Cerritos, CA

Description

Northrop Grumman Aeronautics Systems has an opening for a Sr Principal Engineer Air Breathing Propulsion to join our team of qualified, diverse individuals. This position will be located in Redondo Beach, CA.

As an engineer supporting the Air Breathing Propulsion section, the selected candidate will support the design and analysis needs of unclassified and classified programs in Redondo Beach, California. Candidate will interface with customers to define study areas and report status on current programs and technology development efforts. Candidate may interface with their management and technical teams to define business relationships and technology initiatives for both IRAD (Internal Research and Development) and CRAD (Contractual Research and Development) efforts. This position will support a variety of programs performing analysis and integration activities.

Essential Functions:

• Lead engine performance and cycle analysis and provide guidance to programs
• Lead subsonic and supersonic inlet and exhaust design and integration
• Perform project planning to determine program requirements and develop plans for program execution
• Interface with external engine suppliers and manage external engine supplier activities
• Interface with internal and external customers, assisting in defining system requirements, defining study areas, and providing status on current programs and technology
• Develop and present materials for internal and external program related briefings
• Support new business generation and prepare proposal material
• Strong verbal and communication skills to interact with key cross-discipline stakeholders to achieve program objectives in a timely manner
• Technical and ICD writing
• Task planning, conducting technical peer reviews, and mentoring junior engineers
• Apply and contribute to the development of advanced technical principles, theories, and concepts.
• Work on complex technical problems and provide solutions which are highly innovative
• Collaborate and execute on long-range goals and objectives.
• Develop advanced technological ideas and guide development into a final product.

Basic Qualifications for a Sr Principal Engineer:

• Bachelor's degree in a STEM discipline (Science, Technology, Engineering or Math) with 12 years of related engineering experience; OR a Master's degree in STEM with 10 years of related engineering experience; OR a PhD in STEM with 8 years of related engineering experience.
• Air Breathing Propulsion knowledge and experience on aircraft (subsonic, supersonic or hypersonic) or missile systems.
• Ability and willingness to travel 25% of the time.
• Must have an active DoD Secret (or higher) clearance (with a background investigation within the past 6 years or enrolled into Continuous Education).
• Must have the ability to obtain and maintain Special Access Program (SAP) clearance.

Preferred Qualifications:

• Ten plus (10+) years of experience with Aeronautical Air Breathing Propulsion and Flight Sciences engineering disciplines.
• Experience with survivable propulsion systems
• Experience in technical leadership and guidance of junior Air Breathing Propulsion engineers.
• Experience in Air Breathing Propulsion processes and products throughout the program life cycle.
• Experience in hypersonic design and analysis
• Demonstrated ability to lead an engineering cross-functional team.
• Experience with Agile design teams and tools(Atlassian)
• Understanding of Systems Engineering Principles and Model Based Systems Engineering tools (MBSE) with a practical focus for relevant use cases in propulsion integration.
• Experience with PLM software (Teamcenter)
• Serve as organization spokesperson on advanced projects and/or programs. Act as advisor to management and customers on advanced technical research studies and applications.
• A current active in-scope U.S. Government DoD Top Secret clearance with current or previous Special Program Access (SAP/PAR).

“We create happiness.” That’s our motto at Disney Experiences. At Disney, you’ll help inspire magic by enabling our teams to push the limits of entertainment and create innovative built environments. You will collaborate to develop ideas/thoughts into physical reality! The Architecture & Facilities Engineering (A&FE) team is looking for a Staff Mechanical Engineer to support the development and sustainment of projects we support throughout the Disneyland Resort. Our department supports a wide range of project types including Attractions, Maintenance, Foods, Merchandise, and Entertainment. Projects range from minor renovations to new facilities. You will also support immediate response efforts with reactionary projects.

You will act as the Staff Mechanical Engineering Owner’s Representative with technical expertise for mechanical engineering issues, design management of in-house and outside resources, code compliance, Disney design standards, documentation, specifications, and life cycle cost analysis for best value. This role also involves close collaboration with other engineering disciplines and multiple Disney project teams including FAM, WDI, Entertainment, and Operations.

You will report to the Senior Manager for MEP Engineering with DLR Architecture & Facilities Engineering.

What You Will Do

• Act as Owner’s Representative on projects from concept through construction at the Disneyland Resort.  Project types will include shops, rides, hotels, shows, maintenance facilities, and nearly any built facility and area development found on our property.

• Manage the design and development of contract documents of projects with in-house and outside resources to meet project scopes, schedules and budgets.

• Develop concepts and Request for Proposals (RFP)s.

• Attend, participate, and problem solve during site visits from concept through construction.

• Review drawings and specifications and ensure that all projects are designed and executed to applicable codes and statutes

• Work with stakeholders to provide civil engineering resources to develop project scope including design, planning and code compliance for estimation and feasibility.

• Resolve design issues creatively and thoroughly coordinating design with other disciplines.

• Develop clear technical analyses and recommend frameworks to inform executive review and approval.

• Partner with internal teams to develop, maintain, communicate, and enforce Walt Disney Company design guidelines, standards, master specifications, and details.

• As the owner's representative, you'll review with a focus on constructability, efficiency, and long-term maintainability.

• Liaison with City officials and external agencies to ensure project scope and implementation is coordinated and compliant with external requirements.

• Research Record Drawings in Disneyland Archives.

• Perform field work to investigate and assess mechanical related infrastructure in the Resort.

• Independently review new and existing design drawings and calculations.

• Review shop drawing submittals and respond to vendor requests for information per Resort standards.

• Coordinate design activities and monitor field installations and demolition work that comply with specifications and code requirements.

• Perform reviews of existing infrastructure: propose upgrades and replacements, present findings and recommendations.

• Serve as Engineer of Record on assigned projects, including signing and sealing construction documents when required.

• Design with focus on constructability, efficiency, and long-term maintainability.

• Expedite the receipt of sample submittals required for final design approval.

• Participate in weekly design coordination meetings and prioritize items to minimize schedule impacts.

• Assist Project and Design Managers to resolve design compliance issues relating to Projects requirements. Validate that all Item Specifications are consistent with products installed before archiving manuals.

• Support Executive Design Reviews by contributing technical content, analysis, and coordination as requested by Project or Design Management.

What We Look For

• 10+ years of experience in mechanical engineering design, HVAC/DX/VRF/CHW applications, central plant development and operational guidance, hydraulics, hydronics, compressed air, overall kitchen designs and implementation.

• Ability to support project partners in procurement and construction.

• Experience with AutoCAD, Revit, ACC, and other engineering-based software.

• Working knowledge of both National and Local Standards and Codes.

Required Education and Licensure

• BS Mechanical Engineering or related field from an ABET accredited university.

• Current registration as a Professional Engineer in the State of California in good standing.

#DXMedia #DXFOS #LI-YW1

Additional Information

Benefits and Perks: Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at  hiring range for this position in Anaheim, CA is $126,800.00 to $154,800.00 per year. The base pay actually offered will take into account internal equity and also may vary depending on the candidate’s geographical region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.

As a Lead Electrical Engineer, the candidate must have experience with L band RF systems, able to work from customer requirements to derive additional requirements, define the architecture of a possible solution based on requirements, setup a requirements schema & link requirements to documents (systems/subsystem specification, hardware/RF architecture description document, etc.) and flow down applicable requirements to other groups (software, ASIC, & test) so that they can contribute to realize the end solution based on the proposed architecture.

The Lead EE will also oversee the development a qualification test plan that will ensure that the architecture and solution satisfy the customers’ requirements.

The Lead EE will also work with subject matter experts in the areas of GPS signal processing, anti-jam signal processing, other hardware design team members, control software, and government qualification standards.

As a Lead EE, the candidate is expected to understand each aspect of the technology used in the proposed solution.

The Lead EE also must work with the cost account manager, program management, and project management to develop the solution within the program’s budget and schedule.

Essential Functions: Requires comprehensive level knowledge of Electrical Engineering low frequency and high frequency (RF) Analog and Digital circuit design.

Experience with RF systems, ideally GPS receivers Able to contribute to providing innovative Electrical Engineering solutions consistent with business development plans.

Ability to develop circuit designs, requirements, design descriptions, verification plans/procedures, customer CDRLs to meet program schedules.

Ability to support cross functional teams for cross functional conflict resolution, Root Cause Analysis, blank page architecture developments and design Ability to contribute to algorithm development, analysis, implementation, system architecture, verification, and Test with emphasis on military GPS electronics.

Ability to contribute to execution of design, build, integration and test activities, problem resolution and verifying that the deliverable products meet all program and customer requirements.

Ability to provide project management reports as required, support senior level and customer reviews as necessary.

Ability to provide inputs and reviews of the engineering technical baseline as part of proposal efforts.

Ability to interface with the program’s leadership and other teams (SW, Systems, ME, and Test) on a frequent basis, conduct or participate in customer and/or program technical review presentations, and provide progress status updates on work products.

Ability to participate or lead in the product development process including design reviews.

5 to 10% Travel required.

Must have Secret Security Clearance or be able to obtain a US security clearance.

Qualifications: Required Education/Experience: Requires mastery level knowledge within a specific technical area or multiple job areas.

Viewed as an expert and/or resource within the field by peers in and outside the organization.

Bachelor’s Degree and a minimum of 9 years of prior relevant experience.

Graduate Degree and a minimum of 7 years of prior related experience.

In lieu of a degree, a minimum of 13 years of prior related experience.

Minimum of 5 years’ experience in ability to capture schematics design and PCBA Layout using modern EE CAD such as Altium or Mentor Graphics.

5 years’ experience with project management and product design team leadership guided by individual annual goals and objectives with minimal oversight or direction; working in a team environment as an individual contributor.

6 years’ strong experience with receiver, Antenna, or Radio design (i.e.

RF).

4 years’ experience with embedded Hardware design.

2 years’ experience with FPGA design with emphasis in digital signal processing (DSP) 4 years’ experience demonstrating strong verbal and written skills 7 Years experience with design tools such as MATLAB/Simulink, P-Spice, Agilent ADS (or AWR), Schematics Capturing/PCBA Layout tools such as Altium, and Ansys HFSS 2 Years’ experience with FPGA design tools such as Xilinx ISE, Xilinx EDK, and ModelSim Must have Secret Security Clearance or be able to obtain a US security clearance.

Preferred Additional Skills: Strong familiarity with GPS Module design and topology.

Advanced with High-speed Analog design methodologies.

Advanced in MS Office, design tools such as Simulink/MATLAB, P-Spice, Altium (Schematics Capturing & PCBA Layout), Agilent ADS (or AWR), and Ansys HFSS.

Familiar with FPGA design methodologies.

Proficient with DO-254 design.

In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is Min $127,500.00
- $ 236,500.00 Max.

The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio, and Vermont is $110,500.00 Min
- $205,500.00 Max.

This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location.

L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays.

The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

LI-KM1 L3Harris Technologies is proud to be an Equal Opportunity Employer.

L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.

All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.

L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance.

Security clearances may only be granted to U.S.

citizens.

In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer.

Please click here for the E-Verify Poster in English or Spanish .

For information regarding your Right To Work, please click here for English or Spanish .

d24ad0b8-823f-4e68-a892-2986ccdf7392

Senior Java/Kotlin engineer
Remote
6+ Month Contract: $70-$80 per hour
Our client is in search of a Senior Java Engineer for a 6+ month contract. You will lead the development and testing of our systems and services Participate in shaping the technical architecture of the product Help translate product requirements into user stories and technical solutions Deliver highly available and scalable services in a production environment Mentor other engineers, support the technical culture, and help grow the team Generate ideas for new initiatives and technologies Communicate with project leads, product managers and other software developers

• Systems Development: Lead and participate in the development and testing of our systems and services.
• Requirement Translation: Help translate product requirements into user stories and actionable technical solutions.
• Production Delivery: Deliver highly available and scalable services in a production environment.
• Cross-Functional Collaboration: Communicate effectively with project leads, product managers, and other software developers.

• Education: Bachelor's Degree in Computer Science or a related field.
• Experience: 4+ years of programming experience, ideally using a modern stack.
• Backend Expertise: 2+ years of experience with Java or Kotlin.
• Core Stack Knowledge: Familiarity with our environment ( Java/Kotlin, Spring, PostgreSQL, React) running on Kubernetes within a service-oriented architecture (100+ services).
• Database Proficiency: A solid understanding of relational databases and ORMs.
• Architecture: Experience working on SOA or microservice-based applications.
• Quality Standards: View Unit and Integration tests as first-class citizens in the software development lifecycle.
• Collaborative Workflow: Experience refining designs, performing code reviews, and managing pull requests in a team environment.
• Ownership & Mindset: * A solid sense of responsibility and the ability to drive projects from inception to completion

• Full-Stack Experience: Additional expertise in any of the following areas:
  • Systems: Kafka, Temporal, Docker, POSIX.
  • Databases: Deep PostgreSQL knowledge.
  • Front-End: JavaScript/TypeScript, React.

We champion equality and inclusivity, proudly supporting an Equal Opportunity Employer policy. We welcome applicants regardless of Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other status protected by law.

Job Title: Office Assistant (Contract)

Location: Santa Fe Springs, CA

Pay Rate: Up to $24/hour

Assignment Length: Contract through June 30

Schedule: Monday–Thursday 7:00 AM – 4:00 PM / Friday 6:00 AM – 2:30 PM (30-minute lunch)

Position Overview

We are seeking a detail-oriented Project Coordinator to support project administration and operational coordination within a fast-paced environment. This role will assist with project documentation, communication, and tracking while working closely with cross-functional teams including engineering, production, and warehouse operations.

Key Responsibilities

• Monitor and manage a high-volume shared inbox, responding to requests and routing inquiries to the appropriate teams.
• Communicate with internal teams through Microsoft Teams messaging to coordinate project updates and requests.
• Prepare and compile project documentation and packets, ensuring materials are complete and distributed accurately.
• Perform data entry and job code tracking, maintaining accurate records and project status updates.
• Utilize Microsoft Excel for sorting, filtering, and basic tracking of project data.
• Coordinate with engineering, production, and warehouse staff to help move projects through different stages.
• Maintain organized and accurate documentation, ensuring proper version control of project files.
• Provide general administrative and project support as needed.

Preferred Qualifications

• Previous experience supporting technical, engineering, or manufacturing teams.
• Ability to review or interpret engineering drawings is strongly preferred.
• Familiarity with NetSuite or similar ERP systems is a plus.
• Strong attention to detail, especially when handling project numbers and job codes.
• Comfortable working in an operational or warehouse-adjacent environment.

Equal Opportunity

Employer/Veterans/Disabled

To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

• The California Fair Chance Act

• Los Angeles City Fair Chance Ordinance

• Los Angeles County Fair Chance Ordinance for Employers

• San Francisco Fair Chance Ordinance

• 
  
• Assemble, bond, and finish composite parts and subassemblies
  
• Perform secondary bonding, hardware installation, drilling, trimming, and sanding
  
• Prepare bonding surfaces and mix/apply structural adhesives per specifications
  
• Align, fit, and inspect parts to meet dimensional and tolerance requirements
  
• Follow assembly drawings, travelers, and work instructions
  
• Complete required manufacturing and quality documentation
  
• Support rework, repair, and continuous improvement activities
  
• Adhere to safety, environmental, and quality system requirements
  

• 
  
• Provide daily direction and task assignments to composite assembly personnel
  
• Serve as the primary technical resource for troubleshooting bonding and assembly issues
  
• Train and mentor technicians on proper techniques, safety practices, and quality standards
  
• Monitor workflow to ensure schedule adherence and efficiency
  
• Coordinate with production supervisors, engineering, and quality to resolve issues
  
• Promote a safe, organized, and compliant work environment
  
• Provide input on performance feedback and serve as acting supervisor when required
  

• 
  
• Ability to read and interpret engineering and assembly drawings
  
• Familiarity with hand tools, measuring equipment, and bonding tools
  
• Understanding of adhesive bonding and surface preparation techniques preferred
  
• Strong mechanical aptitude and attention to detail
  
• Ability to work safely with chemicals and adhesives
  
• Effective communication and leadership skills
  
• Strong organizational and problem-solving abilities
  

• 
  
• High school diploma or equivalent required
  
• Prior experience in composite assembly, aerospace manufacturing, or mechanical assembly preferred
  
• On-the-job training may be provided for entry-level candidates
  

Job description:

Company Overview

Calnetix Technologies, LLC is dedicated to transforming the energy landscape by developing innovative, high-speed motor generator technologies that promote energy efficiency and environmental sustainability. We partner with Original Equipment Manufacturers (OEMs) across diverse industries to enhance existing products and pioneer new markets through cutting-edge solutions.

Overview

We are seeking a Manufacturing Product Engineer with background in Manufacturing to oversee the development, manufacturing and lifecycle management of mechanical components for a key client. This role will interface between internal teams, vendors and the client. You will manage product deliveries, scheduling and technical changes as needed.

The ideal candidate has a strong mechanical engineering background, hands-on manufacturing experience and experience managing mechanical products from concept to production.

Duties

• Own and manage assigned mechanical component products throughout their lifecycle, from development through production and delivery
• Coordinate with internal engineering, manufacturing, and quality teams to ensure product requirements are met
• Manage external vendors and suppliers, including sourcing, technical alignment, timelines, and performance
• Develop and maintain project schedules, production timelines, and delivery plans
• Act as the primary point of contact for the customer, managing expectations, requirements, and ongoing communication
• Ensure products meet cost, quality, and performance targets
• Identify and mitigate technical, schedule, and supply chain risks
• Support design reviews, manufacturing readiness, and continuous improvement initiatives
• Track progress and report status to internal stakeholders and the client

Requirements

• Bachelor’s degree in Mechanical Engineering or a related field
• Minimum of 3 years of experience in mechanical product management, manufacturing engineering, or a similar role
• Strong background in mechanical systems, with experience in motors, stators, magnetic bearings, or related electromechanical components preferred
• Hands-on experience in a manufacturing environment
• Proven experience working with suppliers and contract manufacturers
• Strong project management skills, including scheduling and timeline management
• Some proficiency in Solidworks is a plus
• Use of MS Office tools for productivity and Project scheduling is necessary