Engineering Jobs in Cerritos, CA

As a Lead Electrical Engineer, the candidate must have experience with L band RF systems, able to work from customer requirements to derive additional requirements, define the architecture of a possible solution based on requirements, setup a requirements schema & link requirements to documents (systems/subsystem specification, hardware/RF architecture description document, etc.) and flow down applicable requirements to other groups (software, ASIC, & test) so that they can contribute to realize the end solution based on the proposed architecture.

The Lead EE will also oversee the development a qualification test plan that will ensure that the architecture and solution satisfy the customers’ requirements.

The Lead EE will also work with subject matter experts in the areas of GPS signal processing, anti-jam signal processing, other hardware design team members, control software, and government qualification standards.

As a Lead EE, the candidate is expected to understand each aspect of the technology used in the proposed solution.

The Lead EE also must work with the cost account manager, program management, and project management to develop the solution within the program’s budget and schedule.

Essential Functions: Requires comprehensive level knowledge of Electrical Engineering low frequency and high frequency (RF) Analog and Digital circuit design.

Experience with RF systems, ideally GPS receivers Able to contribute to providing innovative Electrical Engineering solutions consistent with business development plans.

Ability to develop circuit designs, requirements, design descriptions, verification plans/procedures, customer CDRLs to meet program schedules.

Ability to support cross functional teams for cross functional conflict resolution, Root Cause Analysis, blank page architecture developments and design Ability to contribute to algorithm development, analysis, implementation, system architecture, verification, and Test with emphasis on military GPS electronics.

Ability to contribute to execution of design, build, integration and test activities, problem resolution and verifying that the deliverable products meet all program and customer requirements.

Ability to provide project management reports as required, support senior level and customer reviews as necessary.

Ability to provide inputs and reviews of the engineering technical baseline as part of proposal efforts.

Ability to interface with the program’s leadership and other teams (SW, Systems, ME, and Test) on a frequent basis, conduct or participate in customer and/or program technical review presentations, and provide progress status updates on work products.

Ability to participate or lead in the product development process including design reviews.

5 to 10% Travel required.

Must have Secret Security Clearance or be able to obtain a US security clearance.

Qualifications: Required Education/Experience: Requires mastery level knowledge within a specific technical area or multiple job areas.

Viewed as an expert and/or resource within the field by peers in and outside the organization.

Bachelor’s Degree and a minimum of 9 years of prior relevant experience.

Graduate Degree and a minimum of 7 years of prior related experience.

In lieu of a degree, a minimum of 13 years of prior related experience.

Minimum of 5 years’ experience in ability to capture schematics design and PCBA Layout using modern EE CAD such as Altium or Mentor Graphics.

5 years’ experience with project management and product design team leadership guided by individual annual goals and objectives with minimal oversight or direction; working in a team environment as an individual contributor.

6 years’ strong experience with receiver, Antenna, or Radio design (i.e.

RF).

4 years’ experience with embedded Hardware design.

2 years’ experience with FPGA design with emphasis in digital signal processing (DSP) 4 years’ experience demonstrating strong verbal and written skills 7 Years experience with design tools such as MATLAB/Simulink, P-Spice, Agilent ADS (or AWR), Schematics Capturing/PCBA Layout tools such as Altium, and Ansys HFSS 2 Years’ experience with FPGA design tools such as Xilinx ISE, Xilinx EDK, and ModelSim Must have Secret Security Clearance or be able to obtain a US security clearance.

Preferred Additional Skills: Strong familiarity with GPS Module design and topology.

Advanced with High-speed Analog design methodologies.

Advanced in MS Office, design tools such as Simulink/MATLAB, P-Spice, Altium (Schematics Capturing & PCBA Layout), Agilent ADS (or AWR), and Ansys HFSS.

Familiar with FPGA design methodologies.

Proficient with DO-254 design.

In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is Min $127,500.00
- $ 236,500.00 Max.

The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio, and Vermont is $110,500.00 Min
- $205,500.00 Max.

This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location.

L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays.

The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

LI-KM1 L3Harris Technologies is proud to be an Equal Opportunity Employer.

L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.

All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.

L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance.

Security clearances may only be granted to U.S.

citizens.

In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer.

Please click here for the E-Verify Poster in English or Spanish .

For information regarding your Right To Work, please click here for English or Spanish .

“We create happiness.” That’s our motto at Disney Experiences. At Disney, you’ll help inspire magic by enabling our teams to push the limits of entertainment and create innovative built environments. You will collaborate to develop ideas/thoughts into physical reality! The Architecture & Facilities Engineering (A&FE) team is looking for a Staff Mechanical Engineer to support the development and sustainment of projects we support throughout the Disneyland Resort. Our department supports a wide range of project types including Attractions, Maintenance, Foods, Merchandise, and Entertainment. Projects range from minor renovations to new facilities. You will also support immediate response efforts with reactionary projects.

You will act as the Staff Mechanical Engineering Owner’s Representative with technical expertise for mechanical engineering issues, design management of in-house and outside resources, code compliance, Disney design standards, documentation, specifications, and life cycle cost analysis for best value. This role also involves close collaboration with other engineering disciplines and multiple Disney project teams including FAM, WDI, Entertainment, and Operations.

You will report to the Senior Manager for MEP Engineering with DLR Architecture & Facilities Engineering.

What You Will Do

• Act as Owner’s Representative on projects from concept through construction at the Disneyland Resort.  Project types will include shops, rides, hotels, shows, maintenance facilities, and nearly any built facility and area development found on our property.

• Manage the design and development of contract documents of projects with in-house and outside resources to meet project scopes, schedules and budgets.

• Develop concepts and Request for Proposals (RFP)s.

• Attend, participate, and problem solve during site visits from concept through construction.

• Review drawings and specifications and ensure that all projects are designed and executed to applicable codes and statutes

• Work with stakeholders to provide civil engineering resources to develop project scope including design, planning and code compliance for estimation and feasibility.

• Resolve design issues creatively and thoroughly coordinating design with other disciplines.

• Develop clear technical analyses and recommend frameworks to inform executive review and approval.

• Partner with internal teams to develop, maintain, communicate, and enforce Walt Disney Company design guidelines, standards, master specifications, and details.

• As the owner's representative, you'll review with a focus on constructability, efficiency, and long-term maintainability.

• Liaison with City officials and external agencies to ensure project scope and implementation is coordinated and compliant with external requirements.

• Research Record Drawings in Disneyland Archives.

• Perform field work to investigate and assess mechanical related infrastructure in the Resort.

• Independently review new and existing design drawings and calculations.

• Review shop drawing submittals and respond to vendor requests for information per Resort standards.

• Coordinate design activities and monitor field installations and demolition work that comply with specifications and code requirements.

• Perform reviews of existing infrastructure: propose upgrades and replacements, present findings and recommendations.

• Serve as Engineer of Record on assigned projects, including signing and sealing construction documents when required.

• Design with focus on constructability, efficiency, and long-term maintainability.

• Expedite the receipt of sample submittals required for final design approval.

• Participate in weekly design coordination meetings and prioritize items to minimize schedule impacts.

• Assist Project and Design Managers to resolve design compliance issues relating to Projects requirements. Validate that all Item Specifications are consistent with products installed before archiving manuals.

• Support Executive Design Reviews by contributing technical content, analysis, and coordination as requested by Project or Design Management.

What We Look For

• 10+ years of experience in mechanical engineering design, HVAC/DX/VRF/CHW applications, central plant development and operational guidance, hydraulics, hydronics, compressed air, overall kitchen designs and implementation.

• Ability to support project partners in procurement and construction.

• Experience with AutoCAD, Revit, ACC, and other engineering-based software.

• Working knowledge of both National and Local Standards and Codes.

Required Education and Licensure

• BS Mechanical Engineering or related field from an ABET accredited university.

• Current registration as a Professional Engineer in the State of California in good standing.

#DXMedia #DXFOS #LI-YW1

Additional Information

Benefits and Perks: Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at  hiring range for this position in Anaheim, CA is $126,800.00 to $154,800.00 per year. The base pay actually offered will take into account internal equity and also may vary depending on the candidate’s geographical region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.

We are seeking a senior West Coast Sales Account Executive to lead enterprise sales of an advanced energy recovery and power generation platform deployed within pressurized natural gas infrastructure.

The technology installs directly into natural gas pressure reduction systems and converts otherwise wasted pressure energy into reliable, fuel-free, zero-emission electricity. It is a hardware-based, capital equipment solution designed for midstream pipeline operators and energy-intensive industrial operators seeking operational efficiency, resiliency, and measurable carbon reduction without disrupting core operations.

This role requires a seasoned infrastructure seller with deep industry knowledge, an established network within target accounts, and a proven ability to close complex, multi-stakeholder capital equipment transactions.

Responsibilities:

• Drive adoption of infrastructure-scale energy recovery and distributed power solutions within midstream pipeline operators and industrial energy users.
• Leverage an established network within pipeline operators, distributed generation teams, and energy transition groups to secure executive-level access and originate qualified opportunities.
• Take ownership of active enterprise opportunities and advance them through technical validation, financial justification, and commercial negotiation to contract execution.
• Engage senior decision-makers across Operations, Asset Management, Engineering, Energy Transition, and C-Suite leadership to position both technical and financial value.
• Navigate structured capital approval processes typical of regulated infrastructure environments, including long-cycle (6–18+ month) procurement and investment reviews.
• Structure and negotiate multi-million-dollar capital equipment agreements aligned with customer operational and financial objectives.
• Translate deep understanding of midstream natural gas systems, pressure regulation infrastructure, and distributed generation applications into compelling business cases.
• Partner with internal engineering and sales engineering teams to validate site feasibility, system integration, and ROI modeling.
• Manage domestic and international accounts across North America and key global markets, with travel as required.
• Maintain disciplined pipeline management, forecast accuracy, and CRM reporting aligned with revenue targets.

Qualifications:

• Bachelor’s degree in Engineering, Business, Energy Management, or related field.
• MBA or advanced technical degree preferred.
• Minimum 10 years of enterprise B2B sales experience in capital equipment, industrial hardware, energy infrastructure, or distributed generation markets.
• Demonstrated history of closing complex, multi-layered deals within regulated infrastructure environments.
• Proven experience negotiating large-scale commercial agreements and managing cross-functional sales processes.
• Strong financial acumen, including the ability to build and defend ROI and capital justification models.

Salary: $140,000- $160,000

Job Summary

The Machinist is responsible for operating manual and CNC machines to produce precision parts that meet strict tolerances and specifications. This role requires expertise in machining methods, precision measurement, and the ability to work with a variety of metals and materials. The machinist will ensure quality, accuracy, and efficiency while maintaining a safe and organized work environment.

Shift: Start out as 6-2:30pm and then once trained moved to 2-10:30pm.

Key Responsibilities

1. Machine parts to precise dimensions, maintaining close tolerances, concentricity, finish, and parallelism.
2. Select appropriate speeds and feeds based on material type and finish requirements.
3. Utilize fixturing methods (shims, wedges, parallels, blocks, supports, chucks, etc.) to properly align workpieces and prevent tool or part damage.
4. Inspect in-process and finished parts using precision measuring instruments to validate specifications.
5. Interpret and follow blueprints to ensure accuracy of manufactured components.
6. Perform routine maintenance and troubleshooting of machining equipment.
7. Lift items weighing up to 40 pounds and work overtime or alternate shifts as required.

Required Qualifications

1. High School Diploma or equivalent.
2. Minimum of 2 years’ machine shop experience, including operating mills, lathes, and related equipment.
3. Basic knowledge of machining methods, precision tools, and cutting qualities of metals.

Preferred Qualifications (if any)

1. Experience with manual and CNC operation on mills, lathes, grinders, and coordinate measuring machines.
2. 2+ years of machining experience.
3. Ability to read and interpret blueprints.
4. Basic proficiency with Microsoft Word, Excel, and Outlook.
5. Technical certificate from a trade school.

Certifications (if any)

1. None specified.

Machines/Equipment

1. Haas CNC vertical machining center
2. Bridgeport mill
3. Engine lathe
4. Surface grinder
5. Cylindrical grinder
6. Bench grinders
7. Belt sanders
8. Bandsaw
9. Tile saw
10. Ultrasonic parts cleaner

AppleOne is partnering with an industry leader in custom chemical formulation and manufacturing based in Santa Fe Springs, CA. This organization serves as a critical partner to various industries, delivering high-quality, precision-engineered chemical solutions. Known for a culture of safety and reliability, they provide a dynamic environment where team members are empowered to take full ownership of the customer experience.

We are seeking a Sales Support Specialist for a full-time, onsite role. This position serves as the vital link between customers, Account Managers, vendors, and internal production teams. You will ensure that orders move accurately and efficiently while maintaining high standards of quality and safety. This role is highly suitable for a detail-driven professional who thrives in a fast-paced, evolving atmosphere and is motivated by the direct impact their work has on business success.

• Industry: Chemical Manufacturing / Industrial Solutions
• Job Function: Sales Support / Order Management
• Employment Type: Direct Hire
• Pay Rate: $24.00 – $27.00 per hour (Based on experience and skills)
• Workplace Type: 100% Onsite (Santa Fe Springs, CA)

Core Responsibilities

• Customer Advocacy: Serve as the primary point of contact for customer and Account Manager needs regarding order status and logistics.
• Order Management: Manage the full lifecycle of customer orders within the ERP system, ensuring accuracy from initial entry through final completion.
• Data Integrity: Maintain highly accurate documentation, pricing records, and customer/product profiles to ensure seamless internal transitions.
• Cross-Functional Coordination: Collaborate with vendors and internal departments to resolve issues and align production with customer expectations.
• Process Ownership: Proactively identify and resolve potential order hurdles to maintain customer trust and operational flow.

Required Qualifications

• Experience: 3 to 5 years of experience in sales support, customer service, or order management, preferably within a manufacturing or industrial environment.
• Technical Skills: Very strong proficiency in ERP systems and Microsoft Office Suite.
• Communication: Ability to communicate clearly and professionally with a variety of internal and external stakeholders.
• Adaptability: A strong ability to adjust to shifting priorities and changing customer needs in a high-volume environment.
• Accountability: A track record of taking ownership of outcomes and following through on complex tasks from start to finish.

Calgon Carbon | A Kuraray Company currently has an opportunity where you can be a part of our growing team as we provide our customers with outstanding products that make the air we breathe and the water we use safe for generations to come.  

Position: Senior Technical Sales Representative
Location: US – Remote West Coast

Excellent Benefits: Medical, dental, prescription & vision, HSA & retirement savings (401k) – Generous Company Match!
Perks: Incentives/bonus plans, competitive pay, paid time off (vacation starting at 3 weeks), tuition reimbursement, wellness programs, fun events, learning & development opportunities.  

Hours of work: Full-time position with hours Monday - Friday, typically 8:30 AM - 5:00 PM
Travel: 50%; air, automobile, and overnight travel to visit customer sites, and company meetings

Responsible for the sale of activated carbon, equipment and services as well as growing and maintaining current business relationships within the defined geographical and/or market specific territories. This position is responsible for municipal and/or industrial sales for various markets such as environmental, chemical, food, drinking water, wastewater, groundwater, and process applications, and requires selling/influencing decision makers in procurement, operations, management, consulting engineers, general contractors, etc. Typical territory revenue responsibility $12-$20 MM (not confined to this range).  This role has more autonomy for managing his/her territory than the TSR IV role.

Duties and Responsibilities (not limited to)
 

• Prepare and document all sales proposals and customer communications as required by the company and business unit directives. This will include the use of GCRM to record and share meaningful customer and market information, bid results, competitive pricing, and other relevant activities
• Update sales forecast on a regular basis
• Keep the manager informed of all activities, including business threats and opportunities, in the assigned customer and market territory
• Assist with Accounts Receivables as needed
• Expand and strengthen the assigned business portfolio by driving strategic growth initiatives and cultivating high-value relationships across target markets
• Identify and secure new opportunities through proactive engagement, market intelligence, and alignment with organizational objectives
• Deliver exceptional customer service by maintaining a deep understanding of client needs and industry trends
• Build trusted, multi-level relationships with key stakeholders across consulting engineering firms, utilities, and manufacturing companies, ensuring tailored solutions and long-term value through best-in-class business practices
• Conduct all activities with a strong commitment to health, safety, and environmental awareness
• Promote safe business practices through professional behavior and by supporting company policies and standards in interactions with customers, partners, and colleagues
• Attend and be involved with market specific conferences and organizations
• Influence/Drive the creation of marketing collateral through communication of market specific needs
• Coordinate and participate in webinars, seminars and/or Lunch and Learns, as needed, to educate customers, prospects, engineering firms, and other stakeholders
• Responsible for the achievement of geographical territory annual sales, profit, and other plan goals
• Conduct regular outbound sales calls to prospect, qualify, and nurture leads, ensuring a full and healthy sales pipeline
• Initiate follow-up calls with prospective and existing clients to build relationships, address needs and advance opportunities through the sales cycle
• Assigned to special projects or initiatives on an as-needed basis
• Organize and/or present relevant technical-based presentations to customers, engineering firms and other market influencers or stakeholders
• Execute market strategies to strengthen Calgon Carbon’s position versus the competition
• Conduct activities in accordance with the marketing plan and sales strategies for assigned customer and market responsibilities
• Actively participate in training activities
   

Qualifications

• A Bachelor's degree (B.A. or B.S.), or equivalent from four-year college or university is required
• An MBA is preferred
• 7-10 years of Technical Sales Experience is required
• Experience in chemical manufacturing/industrial sales is preferred

More about Calgon Carbon, A Kuraray Company 

We are a company of scientific innovators with over 205 patents. For over 75 years, we’ve been innovating solutions to the world’s emerging challenges. Since creating the first activated carbon products from bituminous coal in the 1940s, Calgon Carbon has been a pioneer in developing advanced products, systems and services for air and water purification. Calgon Carbon’s product portfolio now encompasses more than 700 direct market applications. 

Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,350 people and operates 20 manufacturing, reactivation, innovation and equipment fabrication facilities in the U.S., Asia, and in Europe, where Calgon Carbon is known as Chemviron. 

Calgon Carbon was acquired by Kuraray in March of 2018. With complementary products and services, the combined organization will continue to focus on providing the highest quality and most innovative activated carbon and filtration media products, equipment, and services to meet customer needs anywhere in the world. 

Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran

PIa0921025d61c-3631

Job description:

Company Overview

Calnetix Technologies, LLC is dedicated to transforming the energy landscape by developing innovative, high-speed motor generator technologies that promote energy efficiency and environmental sustainability. We partner with Original Equipment Manufacturers (OEMs) across diverse industries to enhance existing products and pioneer new markets through cutting-edge solutions.

Overview

We are seeking a Manufacturing Product Engineer with background in Manufacturing to oversee the development, manufacturing and lifecycle management of mechanical components for a key client. This role will interface between internal teams, vendors and the client. You will manage product deliveries, scheduling and technical changes as needed.

The ideal candidate has a strong mechanical engineering background, hands-on manufacturing experience and experience managing mechanical products from concept to production.

Duties

• Own and manage assigned mechanical component products throughout their lifecycle, from development through production and delivery
• Coordinate with internal engineering, manufacturing, and quality teams to ensure product requirements are met
• Manage external vendors and suppliers, including sourcing, technical alignment, timelines, and performance
• Develop and maintain project schedules, production timelines, and delivery plans
• Act as the primary point of contact for the customer, managing expectations, requirements, and ongoing communication
• Ensure products meet cost, quality, and performance targets
• Identify and mitigate technical, schedule, and supply chain risks
• Support design reviews, manufacturing readiness, and continuous improvement initiatives
• Track progress and report status to internal stakeholders and the client

Requirements

• Bachelor’s degree in Mechanical Engineering or a related field
• Minimum of 3 years of experience in mechanical product management, manufacturing engineering, or a similar role
• Strong background in mechanical systems, with experience in motors, stators, magnetic bearings, or related electromechanical components preferred
• Hands-on experience in a manufacturing environment
• Proven experience working with suppliers and contract manufacturers
• Strong project management skills, including scheduling and timeline management
• Some proficiency in Solidworks is a plus
• Use of MS Office tools for productivity and Project scheduling is necessary

Position Summary:

Who we are: AGSE is a recognized leader in the design and manufacture of aerospace ground support equipment, serving the world’s top aerospace organizations. We are in the midst of a cultural transformation, moving from tribal knowledge and manual reactive processes to a data-driven, standardized, and continuously improving operation. This is your chance to join a team that is committed to real change, not just “checking the box” on Lean.

What You’ll Do: You will be an active partner in driving our transformation—building systems, not just projects. Your focus will be on embedding continuous improvement as a mindset at every level, not just as a set of tools. Your day-to-day will combine process analysis, hands-on problem solving, cross-functional coaching, and project execution, with a direct line to senior leadership.

You won’t just analyze; you’ll implement, teach, and sustain.

Responsibilities: Essential Duties:

· Lead Improvement Projects: Identify, plan, and execute high-impact Lean, Six Sigma, and digital transformation projects focused on operational bottlenecks (quality escapes, long prep times, inefficient assembly, etc.).

· Drive Standardization: Document tribal knowledge into robust SOPs and work instructions; pilot and roll out digital work instruction tools and visual management boards.

· Coach & Train: Deliver hands-on Lean/CI training for operators, leads, and supervisors, focusing on practical skills (problem solving, process mapping, visual management, mistake-proofing, etc.).

· Data-Driven Action: Design meaningful KPIs, collect and analyze shopfloor data (scrap, rework, cycle times, downtime, OTD, etc.), and implement root cause analysis and countermeasures.

· Champion Digital Tools: Work with AI, automation, and analytics tools (Power Automate, ERP integrations, Excel, Power BI) to move the factory toward a paperless, digitally enabled environment.

· Facilitate Change: Run kaizen events, lead daily/weekly Gemba walks, facilitate feedback loops, and support the development of a true continuous improvement culture.

· Collaborate Across Functions: Partner with Quality, Engineering, Production, and Supply Chain to drive cross-functional initiatives and standardize processes.

· Tackle Real Problems: Address recurring issues like final inspection escapes, part marking accuracy, FOD/scratches, material flow, and inefficiencies in manual-heavy processes.

· Measure and Report Savings: Continuous improvement impacts in terms of dollars saved, hours reduced, and risk mitigated; report out to leadership and stakeholders.

Work Location: Santa Fe Springs, CA. 100% Onsite work. No remote nor hybrid availability for this role.

Expertise: Knowledge & Skills:

· 3+ years of hands-on experience in a Lean/Continuous Improvement, manufacturing, or operations engineering role.

· Strong working knowledge of Lean Manufacturing (5S, Value Stream Mapping, SMED, Poka-Yoke, Visual Management), Six Sigma (DMAIC, root cause analysis), and process mapping.

· Track record of driving real improvements, measurable cost savings, cycle time reductions, quality improvements.

· Experience creating and implementing Standard Work, SOPs, and operator-level training.

· Familiarity or experience with digital tools for shop floor (Power BI, Excel, Power Automate, digital checklists, etc.).

· Excellent communication, coaching, and facilitation skills; able to work at all levels from shop floor to leadership.

· Highly self-motivated, able to work with minimal supervision, and thrives in a dynamic, hands-on environment.

· Certification in Lean, Six Sigma (Green/Black Belt), or equivalent experience is highly preferred.

Nice to Have

· Experience supporting or leading ERP transitions (Epicor, Global Shop, etc.).

· Exposure to AI, automation, or advanced manufacturing technologies.

· Background in aerospace, heavy fabrication, or complex assembly environments.

· Experience implementing digital work instruction systems or MES.

· Knowledge of ISO 9001/AS9100 QMS requirements.

Required:

· Bachelor’s degree in: Bachelor’s degree in Industrial, Manufacturing, Mechanical Engineering or related technical field.

· Manufacturing engineering experience a must

· Six Sigma Black Belt, Lean, Quality, or other related certification preferred.

· Onsite role. No hybrid nor remote work available for this role

· Ability to work non-standard schedule as needed.

Physical Demands:

While performing the duties of this job, the employee is regularly required to sit and talk or listen. The employee frequently is required to use hands to handle or feel and reach with hands and arms. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds.

Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.

• Noise Intensity: Moderate
• Occasionally: Office environment, Production/manufacturing environment, Warehouse environment

Pay Range: $90,000 - $120,000 plus a discretionary bonus.

While a Company bonus is not guaranteed, this position’s maximum bonus percentage range can be up to 10% of base salary.

Company bonuses are not guaranteed and are based on your performance, the department’s performance and/or the Company’s financial results.

AGSE is required by law in certain jurisdictions to include a pay scale in the job posting for this position. "Pay scale" means the salary or hourly range that AGSE reasonably expects to pay for this position; it is neither a promise nor a guarantee of the compensation that the successful candidate will receive. The pay scale for this position considers the wide range of factors that AGSE considers in making compensation decisions, including, without limitation: skill set, experience, and training, licensure and certifications, and other business and organizational needs. Please note that it is not typical for AGSE employees to be at or near the top of the pay scale for their role - especially as a new hire - and compensation decisions are dependent on the facts and circumstances of each case.

Job Type: Full-time

Pay: $90,000.00 - $120,000.00 per year

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Referral program
• Tuition reimbursement
• Vision insurance

Work Location: In person

Makita is a worldwide leader in the professional power tool industry. Over the past 100 years, we have built a reputation for using the finest raw materials, the most advanced manufacturing equipment, and the most rigorous quality testing in the industry. Headquartered in La Mirada, CA, Makita U.S.A., with offices in Reno, NV, Wilmer, TX, and Flowery Branch, GA, has brought Makita's best-in-class engineering advantage to professional power tool users in America since 1970.

Job Summary:

The Product Manager is responsible for developing and executing product strategy plans that deliver new innovative solutions, achieve sales objectives, and strategically position Makita USA in a leadership role. This position requires a thorough understanding of the market, competition, trades, end user’s needs, applications, business trends, channels of distribution, and product price positioning for their respective category. This individual will be a product leader working cross-functionally to deliver their category vision and strategy for Makita USA.

Salary: $95,000 – $120,000 per year

Essential Job Duties:

Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

• Manage product development portfolio strategies to include new product development roadmaps and existing product portfolios to align with the company’s vision and objectives.
• Understand product life cycles to create planning processes and timelines to develop new products.
• Manage the overall product development process from ideation to processing the necessary steps and approvals to the implementation and product launch.
• Thoroughly understands primary applications for all related products and accessories while understanding the current competitor’s product strengths, weaknesses, assortments, and marketing strategies.
• Have complete knowledge and assessment of the market, both targeting users and dealer requirements, including current trends, size of the user segments, building code requirements, market opportunities, and geographical strengths to develop strategies to position and develop products that lead the market.
• Establish and employ product innovation positioning with attribute planning that articulates the value proposition to our targeted users.
• Lead/support cross-functional (research) development teams that may include engineering, sales, marketing, logistics, purchasing, outside research firms, and others to develop further new/refreshing products and promotional tactics.
• Responsible for increasing category revenue and profit by developing new products, enhancing products/solutions, implementing promotional activity, and developing/creating sales aids to further build user awareness and brand energy.
• Develop promotional strategies along with the marketing team for new and sustaining products that reinforce the Brand and value to both targeted users and dealers.
• Monitor workflow, milestones, and processes to ensure timelines and deadlines are achieved.
• Deliver product presentations to key customers, trade press, and attend required trade shows.
• Determine annual forecasts and sales budgets for related product categories.
• Strong time management, project management, and strategic planning skills while having a clear vision of the “big picture”.
• Support the quality improvement process by working closely with the QC team by assisting at the field, service, and user levels.

Skills Required:

• Customer Service - Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments.
• Interpersonal Skills - Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control.
• Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings.
• Teamwork - Exhibits objectivity and openness to others' views; Contributes to building a positive team spirit; Supports everyone's efforts to succeed.
• Quality Management - Looks for ways to improve and promote quality; Demonstrates accuracy and thoroughness.
• Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethics; Upholds organizational values.
• Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Develops realistic action plans.
• Adaptability - Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events.
• Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan.
• Marketing experience, including advertising, copy development, working with graphic designers, etc.
• Product management experience, including launching products, ideally in a related industry, such as construction or building products.
• Strong familiarity with power tools, perhaps as a contractor or trades professional, or at a manufacturer or retailer of power tools.

Supervisory Responsibility:

This position does have supervisory responsibilities.

Work Environment:

This position will sometimes work in an open office setting that is quiet and fast-paced and fosters continuous learning while operating under high demand/volume. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets, and fax machines.

Travel:

40% travel may be required for this position, which includes overnight stays in some cities where events are being held.

Education and/or Experience Desired:

• Bachelor’s Degree from a college or university, or equivalent professional institution.
• Master’s degree in marketing, Business, or related discipline preferred.
• We will also consider non-degreed candidates with significant and highly relevant experience.
• 5+ years in product management or similar industry experience.
• Previous experience with both retail and distribution channels is preferred.

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

• Required to regularly use hands to finger, handle, or feel; reach with hands and arms; and talk or hear.
• Required to regularly stand; walk; and stoop, bend, or reach above head.
• Required to frequently sit.
• May be required to occasionally lift, push, or pull up to 75 pounds.
• Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
• Able to ascend and descend stairs.
• Continuously reach out to sort miscellaneous items.
• Physically & mentally able to work in an environment that may be subjected to strict deadlines and multiple projects.
• May be subjected to working extended and/or irregular hours.

Our Benefits Include:

Health & Wellness

• Medical, Dental, and Vision insurance options after 30 days of employment
• Flexible spending accounts (FSA) & Health Savings Accounts (HSA)
• Employee assistance program (EAP) for mental health and well-being
• Paid subscription to Headspace and 5 other members of your choice

Financial Security

• Competitive pay & performance-based incentives
• Company branded vehicle provided
• 401(k) retirement plan with company match
• Basic Term Life insurance is 100% company paid
• Long-term Disability Coverage 100% company paid
• Disability Coverage
• Voluntary Coverage: Critical illness, accidental, hospital indemnity, whole life, and supplemental life plans.

Work-Life Balance

• Paid time off (vacation, sick leave, and 13 paid holidays)
• Employee discounts on Makita tools and accessories - because we know you love quality tools!

Join Makita USA and power up your career with a company that values innovation, teamwork, and excellence!

Explore Opportunities & Apply Today!

Disclaimer:

This description is based on management's assessment of the requirements and functions of the job as of the date this description was prepared. It is a general guideline for managers and employees, but it does not intend to be an exhaustive list of all of the elements of the job. Management reserves the right to modify the description at any time, or to vary the duties and responsibilities of the job on a temporary or indefinite basis to meet production, scheduling, or staffing needs.

Equal Opportunity Statement:

The Company is an equal opportunity employer and makes employment decisions based on merit. Company policy prohibits discrimination based on race, color, creed, sex, religion, marital status, age, gender, national origin, ancestry, physical disability (including HIV and AIDS), mental disability, veteran status, military service, pregnancy, childbirth or related medical condition, genetic information, medical (including genetic characteristics or cancer diagnosis), actual or perceived sexual orientation, or any consideration protected by federal, state or local laws. All such discrimination is prohibited. Additionally, the Company will provide registered domestic partners with all rights and benefits as required by Law. The Genetic Information Nondiscrimination Act of 2008 (GINA) prohibits employers from requesting or requiring genetic information of an individual or a family member of the individual. The Company is committed to complying with all applicable laws and providing equal employment opportunities.

PilotCBP Air Interdiction Agent

NEW RECRUITMENT AND RETENTION INCENTIVES!

Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.

If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demandAPPLY TODAY!

DONT FORGET TO CHECK OUT THE INCENTIVES SEE SALARY SECTION BELOW!

Duty Locations

Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:

Southeast Region:Homestead, FL and CAMB:Aguadilla, PR

Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX

NASOC UAS locations:Sierra Vista, AZ; San Angelo, TX

Duties and Responsibilities

As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:

• Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
• Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
• Collecting, refining, and analyzing strategic and tactical intelligence.
• Supporting search and rescue and humanitarian efforts.

Salary and Benefits

Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).

Recruitment Incentive:New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)

Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.

This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).

• GS-11, 1st year annual pay - $106,588
• GS-12, 2nd year annual pay - $127,754
• GS-13, 3rd year annual pay - $151,918

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).

• GS-11, 1st year annual pay - $115,115
• GS-12, 2nd year annual pay - $137,974
• GS-13, 3rd year annual pay - $164,071

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).

• GS-11, 1st year annual pay - $127,906
• GS-12, 2nd year annual pay - $153,305
• GS-13, 3rd year annual pay - $182,302

Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.

• RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)

• RI: Retention Incentive (25% for Key West, FL)

RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)

Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications

Experience:You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:

• Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
• Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
• Developing strategies and coordinating aircraft and ground assets.
• Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
• Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.

Hiring Minimums:

Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:

• Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
• Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
• Helicopter Rated: Rotorcraft Helicopter with instrument rating.
• Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).

Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.

250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.

FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.

Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)

UAS Flight Hours:Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the ""Total flight time"" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the ""day before an individual's 37th birthday"" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.

NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.

Age Waiver: Creditable law enforcement officer service -Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decisionIsabellav.Dept of State,the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training:This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply

There Are Three Ways to Apply to Become an Air Interdiction Agent:

• Fill out theAir Interdiction Agent applicant checklistand email it to a recruiter at along with a copy of your resume; OR

• Apply onUSAJOBS;OR

• Apply onAirline Apps.

Stay Updated Opt into CBPs talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. Youll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

• Government & Military

Description

Northrop Grumman Aeronautics Systems has an opening for a Sr Principal Engineer Air Breathing Propulsion to join our team of qualified, diverse individuals. This position will be located in Redondo Beach, CA.

As an engineer supporting the Air Breathing Propulsion section, the selected candidate will support the design and analysis needs of unclassified and classified programs in Redondo Beach, California. Candidate will interface with customers to define study areas and report status on current programs and technology development efforts. Candidate may interface with their management and technical teams to define business relationships and technology initiatives for both IRAD (Internal Research and Development) and CRAD (Contractual Research and Development) efforts. This position will support a variety of programs performing analysis and integration activities.

Essential Functions:

• Lead engine performance and cycle analysis and provide guidance to programs
• Lead subsonic and supersonic inlet and exhaust design and integration
• Perform project planning to determine program requirements and develop plans for program execution
• Interface with external engine suppliers and manage external engine supplier activities
• Interface with internal and external customers, assisting in defining system requirements, defining study areas, and providing status on current programs and technology
• Develop and present materials for internal and external program related briefings
• Support new business generation and prepare proposal material
• Strong verbal and communication skills to interact with key cross-discipline stakeholders to achieve program objectives in a timely manner
• Technical and ICD writing
• Task planning, conducting technical peer reviews, and mentoring junior engineers
• Apply and contribute to the development of advanced technical principles, theories, and concepts.
• Work on complex technical problems and provide solutions which are highly innovative
• Collaborate and execute on long-range goals and objectives.
• Develop advanced technological ideas and guide development into a final product.

Basic Qualifications for a Sr Principal Engineer:

• Bachelor's degree in a STEM discipline (Science, Technology, Engineering or Math) with 12 years of related engineering experience; OR a Master's degree in STEM with 10 years of related engineering experience; OR a PhD in STEM with 8 years of related engineering experience.
• Air Breathing Propulsion knowledge and experience on aircraft (subsonic, supersonic or hypersonic) or missile systems.
• Ability and willingness to travel 25% of the time.
• Must have an active DoD Secret (or higher) clearance (with a background investigation within the past 6 years or enrolled into Continuous Education).
• Must have the ability to obtain and maintain Special Access Program (SAP) clearance.

Preferred Qualifications:

• Ten plus (10+) years of experience with Aeronautical Air Breathing Propulsion and Flight Sciences engineering disciplines.
• Experience with survivable propulsion systems
• Experience in technical leadership and guidance of junior Air Breathing Propulsion engineers.
• Experience in Air Breathing Propulsion processes and products throughout the program life cycle.
• Experience in hypersonic design and analysis
• Demonstrated ability to lead an engineering cross-functional team.
• Experience with Agile design teams and tools(Atlassian)
• Understanding of Systems Engineering Principles and Model Based Systems Engineering tools (MBSE) with a practical focus for relevant use cases in propulsion integration.
• Experience with PLM software (Teamcenter)
• Serve as organization spokesperson on advanced projects and/or programs. Act as advisor to management and customers on advanced technical research studies and applications.
• A current active in-scope U.S. Government DoD Top Secret clearance with current or previous Special Program Access (SAP/PAR).

Arrowhead Talent Solutions is helping a growing aerospace and aviation manufacturing company find a Manufacturing Operations Supervisor in Fullerton, CA.

**Must be a US Citizen**

**Must have experience with CNC Machines**

• Lead first-shift manufacturing operations for a large production team, ensuring safety, productivity, and on-time delivery.
• Manage daily production activities including scheduling, staffing, training, and performance management.
• Drive operational efficiency through process improvements, cross-functional problem solving, and 5S initiatives.
• Partner with engineering, quality, and maintenance to resolve production issues and improve product quality.
• Conduct performance reviews and support hiring, development, and retention of team members.

Qualifications

• 6+ years of manufacturing leadership experience (aerospace or automotive preferred).
• Strong knowledge of CNC machining environments, tooling, and manufacturing processes.
• Ability to read and interpret blueprints and technical documentation.

Here, we craft excellence together. Your mission? Making the journey the most enjoyable part of the trip.

Join our first-class team to reinvent in-flight experience. In the role of Planning Supervisor, you'll play a pivotal part on our production team.

The Aftermarket Planning Supervisor will lead and manage a team of spares planners within the aftermarket division of a global aerospace manufacturing company. This role is dedicated to ensuring operational excellence in aftermarket planning, scheduling, and inventory management. With a strong focus on aerospace spares support, the Supervisor will oversee queue management, KPI performance, and daily planning execution to meet customer requirements. The position plays a key role in ensuring the accuracy of data in the business system, which directly impacts company-wide financial reporting and aftermarket customer satisfaction.

• Lead, mentor, and supervise a team of spares planners in the aerospace aftermarket division, ensuring high performance, accountability, and alignment with organizational goals.

• Implement and maintain world-class strategies for aftermarket planning, scheduling, inventory, and customer satisfaction, while driving continuous improvement across all functions.

• Oversee all aftermarket planning activities, including workload balance, prioritization, and queue management for PPO, initial commitment dates and recovery dates, ensuring accuracy, timeliness, and ownership of all lines.

• Drive daily execution of key aftermarket KPIs including PPO release adherence, initial commitment dates and recovery date creation, and PMO release compliance. Monitor individual performance, flex resources to balance changing workloads, and lead cross-functional efforts to resolve the highest aging lines.

• Act as the first line of escalation for planning and operational issues, providing rapid problem-solving support to both the team and internal stakeholders.

• Maintain and update weekly KPI charts for Tuesday management reports, providing analysis and insights while the Manager presents. Transition ownership of additional metrics (supply cancellations, pull-ins, pushouts, NCR, etc.) from Manager to Supervisor over time.

• Develop and monitor aftermarket production plans, budgets, and schedules in line with aerospace requirements and plant capacity. Proactively identify risks or delays and implement corrective actions to protect customer commitments.

But what else? (advantages, specificities, etc.)

• Ensure planners execute essential functions including BOM analysis, material planning, timely requisition delivery to purchasing, work order release and management, revision control, ERP data accuracy, and on-time fulfillment of aftermarket customer requirements.

• Oversee inventory levels to meet company and aftermarket customer goals, ensuring alignment with financial targets and operational needs.

• Foster premier customer service for airlines, MROs, and other aerospace aftermarket clients by ensuring planning execution supports client expectations.

• Conduct risk assessment and mitigation activities specific to aftermarket supply chain challenges.

• Provide leadership through training, mentoring, and talent development, driving a culture of accountability, collaboration, and professional growth within the spares planning team.

• Execute strong working knowledge of MRP/ERP systems and other applicable planning tools, leveraging aerospace expertise to optimize performance.

• Collaborate with supply chain, operations, engineering, and quality teams to ensure aftermarket planning alignment with aerospace manufacturing standards and long-term business objectives.

• Other duties as assigned by the management team.

Candidate skills & requirements

Education: BS/BA degree required from an accredited university

Experience: Minimum of 7+ years of progressive planning, scheduling and inventory management experience in aerospace, automotive or mechanical manufacturing environment with the ability to lead and influence others, with 2+ years of the 7 years in a planning leadership position

Computer Skills:

• Experience working with MRP/ERP systems

• Proficiency with MS Office Skills (Excel, Word, PowerPoint, Outlook)

Other Skills:

• Broad knowledge of the field with proven management skills.

• Effective oral and written communications skills

• Demonstrated ability to handle multiple projects and assignments with attention to detail

• Problem solving, well organized, detailed oriented and accurate.

• Strong written and verbal business communications abilities must be comfortable delivering information to all levels of the organization including senior leadership.

• Working knowledge of business finance skills and abilities.

Additional Preferred Skills: (not required)

• BS/BA in supply chain, business management, or operations from an accredited university

• APICS CPIM and/or ISM certifications

• Experience in AS/ISO standards quality management experience.

• Problem-solving skills (Six Sigma Green Belt, etc.)

• Aftermarket or Spares Business experience

Description: Entry-level management position within field.

Oppenheimer National – Construction Project Engineer / Assistant Project Manager

Salary: $70,000 – $90,000 per year

Location: Huntington Beach, CA (On-site)

Job Type: Full-time

⸻

About the Role

Oppenheimer National is seeking a highly capable and motivated Construction Project Engineer / Assistant Project Manager to support our commercial construction projects across Southern California. This role is essential to ensuring field operations, documentation, and project coordination run smoothly and professionally.

If you thrive in a fast-paced commercial construction environment, enjoy solving technical challenges, and excel at keeping teams aligned with project requirements, this is an excellent opportunity to advance your career with a growing general contractor.

⸻

Core Responsibilities

Field & Project Coordination

• Support and supervise daily operations on active construction sites

• Coordinate subcontractors and ensure compliance with approved plans and specifications

• Assist in resolving field issues, clarifying scope, and supporting project execution

Technical Documentation & Controls

• Prepare and manage RFIs, submittals, logs, and schedule updates

• Review, interpret, and communicate project documents, including blueprints and technical specifications

• Support the preparation of project deliverables and progress reporting

• Maintain accurate document control and assist in drafting site-related correspondence

Project Support

• Collaborate with Project Managers and Superintendents to ensure timely progress

• Assist with procurement coordination and follow-up

• Participate in site walks, meetings, and inspections as needed

⸻

What You Bring

• Bachelor’s degree in Civil Engineering, Construction Management, or related field

• Minimum 3 years of experience working with a general contractor or subcontractor

• Strong understanding of construction trades, sequencing, and field operations

• Ability to read and interpret construction blueprints and specifications

• Experience preparing RFIs, submittals, and maintaining project logs

• AutoCAD proficiency and general computer/software competency

• Excellent written and verbal communication skills

⸻

About Oppenheimer National

Oppenheimer National is a commercial general contractor delivering public and private sector projects throughout Southern California. Our portfolio includes:

• Modernization & renovations

• Seismic retrofits

• New commercial builds

• Parks, playgrounds & landscape

• Infrastructure and public facilities

We are committed to craftsmanship, innovation, and building long-term value for our clients and communities.

Learn more at

⸻

Benefits

• 401(k)

• Flexible schedule

⸻

How to Apply

Email your resume to

Or text your resume to (949) 264-2640

Must be able to commute to Huntington Beach, CA 92647

We're seeking an experienced Sales Support Representative to partner with sales, technical, and procurement teams in a fast‐paced IT services environment. This role is ideal for someone who thrives on organization, cross‐functional collaboration, and supporting revenue growth across technology, telecom, network, and infrastructure solutions.

What You'll Do

• Support the end‐to‐end sales lifecycle, including RFP/RFQ coordination, pipeline tracking, and order fulfillment
• Partner closely with sales, engineering, finance, and vendors to ensure accurate, timely delivery of IT solutions
• Maintain and organize sales documentation, pricing, contracts, and proposals
• Enable pipeline generation through strong administrative support and process execution

What You Bring

• 5+ years of administrative experience supporting sales, marketing, or procurement teams
• Hands‐on experience with RFPs/RFQs and sales pipelines in an IT services or technology solutions environment
• Strong understanding of telecom, network, or infrastructure services
• Exceptional organizational and communication skills, with proven success working across cross‐functional teams

Why This Role

• High‐impact position supporting complex IT solutions
• Exposure to enterprise‐level technology deals
• Collaborative, team‐oriented environment where your support directly drives sales success

Job Type & Location

This is a Contract to Hire position based out of Torrance, CA.

The pay range for this position is $30.00 - $35.00/hr.

Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)

This is a fully onsite position in Torrance,CA.

This position is anticipated to close on Mar 20, 2026.

We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

About TEKsystems and TEKsystems Global Services

We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at .

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

• Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
• Completing Joint Professional Military Education (JPME) at one of the various service colleges

As we continue to enhance our digital customer experience, we’re seeking a dynamic temporary Ecommerce Manager to lead key growth initiatives across our ecommerce website.

The temporary Ecommerce Manager will be responsible for owning key strategic areas of our digital business, including but not limited to: planning and executing site content on Shopify, optimizing the online customer journey including reporting, and driving impactful digital promotions and campaigns. This role is ideal for someone who thrives in an entrepreneurial environment, who can lead strategy development and execute creatively to deliver results.

Essential Job Functions & Responsibilities:

• Lead the strategy, optimization, and performance of the Windsor eCommerce homepage in addition to key digital touchpoints across
• Oversee daily content updates and overall site experience in partnership with product, UX, customer service and engineering teams
• Drive KPIs around site engagement and conversion while delivering ongoing analytics reporting and actionable insights
• Collaborate with merchandising, design, SEO and marketing teams to leverage site content, identify opportunities and optimize on-site incentives
• Develop and deliver seamless omnichannel promotions in partnership with buying, marketing and customer service teams
• Manage on-site discount code creation, execution and maintenance alongside sitewide promotional initiatives
• Lead cross-functional efforts to monitor, report on and improve page speed and overall web performance, driving higher conversion, stronger search visibility, and an enhanced user experience
• Partner with our third-party returns vendor to optimize the online customer returns experience
• Own the brand protection initiative in partnership with our third-party vendor to identify and remove counterfeit listings and fraudulent websites
• Analyze eCommerce trends and competitor insights to guide best practices and support strategic planning for

Key Qualifications & Requirements:

• Business or Communications related degree
• Fashion retail or DTC brand experience
• Minimum 5+ years experience in a fast-paced, ecommerce business, with direct experience managing site content
• Must have hands-on experience using Shopify Plus

• Strong analytical skills, with proven experience working with reporting and analyzing data to drive results
• Strong market research skills & a knowledge of the fashion industry
• Strong writing &presentation skills
• Experience leading projects and working collaboratively across departments
• Proven experience driving change and innovation online
• Ability to multitask and meet deadlines, whilst maintaining close attention to detail

Physical/Environmental Demands and Overtime & Availability

Work is performed in an office environment and requires the ability to operate standard office equipment and keyboards. Must have the ability to walk short distances. Sedentary work. Exerting up to 10 pounds of force occasionally and/or a small amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects. Repetitive motion. Adequate movements(motions) of the wrists, hands, and/or fingers. Team members are required to have close visual acuity to perform activities such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading.

*

Job descriptions are merely a summary of the position. Duties and responsibilities are subject to change and may include any other that management finds necessary to successfully maintain business operations.

WINDSOR EQUAL OPPORTUNITY EMPLOYER