Engineering Journal Jobs in Fl Remote
673 positions found — Page 13
This is a highly responsible position that supports the health, safety and welfare of Tribal members and the public.
The incumbent in this position is responsible for managing the regulation and inspection of building construction, electrical, mechanical, and plumbing installations and directing compliance and enforcement of all related federal, state and local ordinances of the Seminole Tribe of Florida (STOF).
Work involves technical review of all types of construction drawings, plans, and specifications to ensure compliance with applicable codes and ordinances.
The incumbent provides general oversight, management, and leadership to building inspectors, plans examiners, and permit technicians as required and is responsible for the issuance of all permits and Certificates of Occupancy in accordance with the Florida Building Code and Tribal administrative policy.
The person is also responsible for the administration of the Tribe's elevator and commercial structure annual inspections programs.
The individual works closely with the Director of the Tribal Inspector's Department to support all departmental programs and initiatives, including but not limited to the development of the departmental budget and strategic plans, development of building inspections processes and programs, evaluation and improvement of service delivery systems, and administration of the Tribe's Unsafe Structures Ordinance Program.
The incumbent may attend Tribal Council meetings or other community meetings and works with all necessary stakeholders to resolve complaints, address concerns, or solve problems as needed.
Bachelor's degree in Engineering, Building Construction, Civil Engineering, Architecture or related field is required.
Master's degree is preferred.
A minimum of ten (10) years of experience as an Architect, Engineer, Building Inspector, Build Code Administrator, or Construction Superintendent with at least five (5) years being in a supervisory capacity is required; or, any equivalent combination of education, experience and training will be considered.
Prior experience with EnerGov software system is preferred.
Possession and maintenance of a Building Code Administrator certification by the Florida Building Code Administrators and Inspector's Board is required.
Possession of a valid Florida Driver's License is required.
Must have excellent organizational and interpersonal skills including the ability to clearly communicate complex ideas in English both orally and in writing.
Must be able to respond and commit to full duty operations during Hurricane or other emergency events.
Demonstrate proficiency with Microsoft software programs.
Demonstrate excellent organizational and interpersonal skills including English written and oral communication skills are required.
Ability to travel and work a flexible schedule including evenings, weekends and holidays.
This is a full-time, on-site role for a Large Format Additive Manufacturing Manager based in Merritt Island, FL. This position is responsible for owning and scaling Building Blocks’ large-format additive manufacturing capability from early application through fully integrated, production-ready use on live façade projects.
The role sits at the intersection of design, engineering, manufacturing, and project execution. The Additive Manufacturing Manager will lead the strategy, process development, and day-to-day operation of LFAM systems used to produce molds, tooling, and potentially end-use architectural components. Success in this role is defined by throughput, repeatability, quality, and reliability.
Responsibilities include defining and optimizing print processes and parameters, qualifying materials, commissioning and maintaining equipment, establishing QA/QC and safety standards, and integrating additive manufacturing directly into project workflows. The role also includes building and leading a high-performance team while driving continuous improvement in cycle time, cost, and output quality.
Close collaboration with design, engineering, tooling, and production teams is essential to ensure digital models translate into executable, production-grade print paths that meet real schedule and cost constraints.
Qualifications
- 8–12+ years of experience in advanced manufacturing, additive manufacturing, or industrial automation, with 3–5+ years in a leadership role
- Direct, hands-on experience with large-format additive manufacturing systems (robotic or gantry-based); concrete, cementitious, or composite materials strongly preferred
- Strong understanding of material behavior, process control, tolerancing, curing, and post-processing
- Proven ability to take emerging or LFAM technologies and turn them into reliable, repeatable production systems
- Experience establishing manufacturing standards, QA/QC criteria, safety protocols, and performance metrics
- Demonstrated leadership in building, training, and managing technical teams
- Strong problem-solving skills with a bias toward execution and accountability
- Bachelor’s degree in Engineering, Manufacturing, or a related technical field
Note to Recruitment Agencies: We love your enthusiasm, but we prefer to connect with our candidates directly. Building Blocks is not partnering with external agencies for this search, so please save the outreach, we’ve got this one covered. Any resumes submitted without a signed agreement in place will become the property of Building Blocks and no fees will be paid.
Building Blocks is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law.
Accommodations: If you require reasonable accommodation in completing this application, interviewing, or otherwise participating in the employee selection process, please direct your inquiries to People Strategy Department - 321-338-7299.
Company Description
Technical-Link North America specializes in engineering staffing, connecting talented engineers with leading organizations. With a focus on providing tailored solutions, the company ensures both employers and job seekers achieve their respective goals. Technical-Link supports the engineering industry by offering resources to facilitate career growth and company success. The organization takes pride in fostering meaningful professional relationships and delivering quality services.
Role Description
This is a full-time, on-site position in West Palm Beach, FL, for an Account Manager. In this role, you will develop and manage client relationships while identifying staffing needs and securing new job opportunities for our recruiting team. Daily responsibilities include building relationships with hiring managers, qualifying job requirements, negotiating rates and terms, and partnering closely with recruiters to deliver qualified engineering talent to client organizations. You will play a key role in expanding client partnerships and ensuring a high level of service and satisfaction.
Responsibilities
- Develop and maintain strong relationships with clients to ensure their satisfaction and retention.
- Lead sales initiatives by identifying new business opportunities through warm calling and networking.
- Negotiate contracts and agreements to maximize profitability while meeting client expectations.
- Utilize Bullhorn to manage account information, track sales activities, and analyze performance metrics.
- Collaborate with internal teams to deliver tailored solutions that meet market demands.
- Conduct regular account reviews to assess performance, identify areas for improvement, and implement strategies for growth.
- Communicate effectively with clients regarding product updates, service changes, and promotional offerings.
What We're Looking For
- Highly motivated and competitive with a strong drive to win business and grow accounts
- Comfortable with outbound sales activity, including calling, networking, and developing new client relationships
- Strong relationship-building skills with the ability to earn trust quickly with hiring managers and decision makers
- Confident communicator who can clearly qualify job requirements and manage client expectations
- Organized and accountable with the ability to manage multiple priorities in a fast-paced environment
- Resilient and persistent, with the ability to handle rejection and continue building new opportunities
- Coachable and eager to learn within a performance-driven sales environment
- Proficient with CRM or ATS systems such as Bullhorn, with strong attention to detail in documentation
Requirements
- Bachelor’s degree or equivalent professional experience
- 2+ years of staffing, recruiting, account management, or B2B sales experience
- Experience developing client relationships and generating new job opportunities
- Experience negotiating rates, contract terms, or service agreements
- Experience using CRM or ATS systems (Bullhorn preferred)
*Strong preference for a candidate to relocate to Jacksonville, FL if not already in the area. Will consider remote candidates in other locations that are willing to travel up to 50% - 70% of the time to field client sites. First 1-2 months of the role will be training at our Normandy BLVD Manufacturing Site in Jacksonville, FL.
Company Summary
Stellar Energy provides state-of-the-art solutions customers build in for optimized energy performance now; and in preparation for the energy needs of tomorrow. In business for 25 years, we’ve delivered added energy efficiency and capacity to customers in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Hyperscale deployment at the best possible speed to first megawatt. All delivered with the lower emissions required to support our partners’ unique sustainability objectives.
Stellar Energy specializes in a wide range of engineering and manufacturing solutions within the energy sector including turbine inlet air chilling, central utility plants, district cooling, combined heat & power systems, thermal energy storage, inlet air heating, data center chilling, and inlet air chilling for LNG facilities. Additionally, our expertise extends to start-up & commissioning, system health analysis, services, and training. Our in-house team of skilled engineers and dedicated tradespeople are the reason we are the global leader in customized solutions. Stellar Energy strives to add value to today’s energy infrastructure, achieving secure, affordable, and sustainable energy that will help to create a responsible energy economy.
Job Summary
The Field Quality Engineer is responsible for providing quality support during design, procurement, manufacturing, and test activities on Stellar Energy projects. The major objective of the position is to assist in the management of day-to-day quality activities to ensure the Stellar Energy fabricated modules meet client quality requirements.
Essential Functions
- Establish field services inspection program with appropriate procedures and forms or review and comment on contractors proposed procedure.
- Support key client’s data extraction from ACC software to drive focused impactful interventions at sites and also by XFN team members in the supplying factories and offices.
- Perform inspections on activities and material. Coordinate inspections by other parties. Provide third party review of destructive/non-destructive test results and data.
- Assist in the supplier evaluation and selection for field process.
- Witness or provide for the witnessing testing of systems and equipment including tolerance checks or other inspections as specified in the quality control inspection procedures.
- Review quality specifications for project and proposal.
- Verify site contractor performing all fabrication, assembly, welding to approved client requirements, and applicable code and acceptance criteria.
- Initiates nonconformance reports. Shall ensure all nonconforming material is quarantined or segregated and either reworked, repaired, accepted “as is,” or scrapped based on Nonconformance Report dispositions.
Required Education and Experience
- Minimum of 5 years of experience in industrial QA/QC or similar projects working experience.
- Experience with use of DMAIC, 8D, PDCA, MiniTab, A3’s and RCA Sampling plans, and statistical analysis.
- Familiar with ISO 9001:2015 systems.
- Familiarly with process control, Lean, SPC tools, Six Sigma, etc.
- Basic computer skills (i.e., email, Microsoft Word, Excel, Outlook).
Preferred Education and Experience
- Bachelor of Science degree in Engineering or technical field from an accredited University
- QMS Auditor trained.
- Manufacturing / construction experience with general mechanical equipment including pumps, chillers, heat exchangers, etc.
Company Description
CPS Outdoors specializes in designing and creating custom pools and outdoor spaces that combine elegance, functionality, and durability. We are dedicated to delivering premium-quality projects that enhance outdoor living experiences. Our expert team brings creativity and technical expertise to deliver personalized solutions for our clients. Located in Miami, FL, we have built a reputation for excellence in transforming outdoor areas into stunning, practical retreats.
Role Description
This is a full-time on-site role for a BIM/CAD Drafter based in Miami, FL. The BIM/CAD Drafter will be responsible for producing detailed technical, engineering, and architectural drawings using computer-aided design (CAD) software. Additional responsibilities include collaborating with project teams to ensure design accuracy, preparing plans for custom pools and outdoor spaces, and modifying designs based on project requirements to align with client expectations.
Qualifications
- Proficiency in Computer-Aided Design (CAD) software and related drafting technology
- Experience in creating accurate technical drawings, engineering drawings, and architectural plans
- Strong skills in drafting and generating detailed design plans
- Excellent attention to detail and the ability to interpret design concepts into drawings
- Effective communication and collaboration skills
- Familiarity with construction codes and standards is a plus
- Relevant certification or associate degree in CAD design, drafting, architecture, or related field is preferred
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title
- Quality Engineer 2
- Remote Duration: 12 Months Location: Remote Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: The main function of a quality engineer is to research and test the design, functionality, and maintenance of products, equipment, systems, and processes, and develop quality standards.
A typical quality engineer can read and interpret blueprints and evaluate product integrity and standards.
Job Responsibilities: Devises sampling procedures and designs and develops forms and instructions for recording, evaluating, and reporting quality and reliability data.
Establishes a program to evaluate the precision and accuracy of production equipment and testing, measurement, and analytical equipment and facilities.
May write training material and conduct training sessions on quality control activities.
May specialize in areas of quality control engineering, such as design, incoming material, process control, product evaluation, product reliability, inventory control, metrology, automated testing, software, research and development, and administrative applications.
Skills: Creativity, verbal and written communication skills, analytical and problem-solving ability.
Team player and detail-oriented.
Basic ability to read and interpret blueprints, technical drawings, schematics, and computer-generated reports.
Basic experience with computer applications and software related to the engineering field, such as Computer-Aided Design (CAD).
Education/Experience: Bachelor's degree in engineering required.
2-4 years of experience required.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
schematics, Computer Aided Design (CAD)
Remote working/work at home options are available for this role.
Assistant Project Manager
Construction | Chicago, IL | Hybrid Flexibility
A globally recognized Architecture, Engineering, and Construction firm is seeking an Assistant Project Manager to join their downtown Chicago office. This firm delivers complex, high profile projects across the United States and internationally, with a diverse portfolio including industrial, residential, commercial, education/public, mixed use, and hospitality developments valued up to $200M+.
This role offers the opportunity to support the delivery of large scale projects while working within a fully integrated AEC delivery model alongside architecture, engineering, and construction teams.
The Opportunity
- The Assistant Project Manager will support senior project leadership in the planning and execution of construction projects from preconstruction through completion. This role will assist with coordination across project teams, consultants, subcontractors, and clients to ensure projects are delivered safely, on schedule, and within budget.
- You will gain exposure to complex projects across multiple sectors while developing your leadership and project management capabilities within a collaborative AEC environment.
Key Responsibilities
- Support the planning and execution of construction projects valued up to $200M+.
- Assist in managing projects from preconstruction through project closeout.
- Coordinate with project managers, superintendents, project engineers, and subcontractors to maintain project progress.
- Work closely with internal architectural and engineering teams within the integrated AEC environment.
- Assist with project financial tracking including budgets, cost reporting, forecasting, and change management.
- Help maintain project schedules, documentation, and reporting.
- Support communication between clients, consultants, subcontractors, and internal teams.
- Participate in project meetings and assist in tracking action items and deliverables.
- Ensure project documentation complies with safety standards, contractual requirements, and company procedures.
Qualifications
- 2 to 6 years of construction project management experience.
- Experience supporting commercial, mixed use, residential, industrial, hospitality, or institutional construction projects preferred.
- Exposure to projects valued $10M to $100M+.
- Strong organizational and coordination skills.
- Ability to support project financials, schedules, and documentation.
- Excellent communication and teamwork capabilities.
- Bachelor’s degree in Construction Management, Engineering, Architecture, or related field preferred.
Why Join
- Globally respected Architecture, Engineering, and Construction firm with an international project portfolio.
- Opportunity to work on complex projects across multiple sectors.
- Strong mentorship and career progression toward Project Manager and Senior Project Manager roles.
- Collaborative environment working alongside architecture and engineering teams in an integrated delivery model.
- Downtown Chicago office with a hybrid work schedule with 2 days work from home.
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries regarding the following opportunity, please contact our Talent Specialist, Abdul at (224) 507-1295 Title: Training Coordinator
- Hybrid Duration: 12 Months Location: Charlotte, NC, Schedule: 3 days in office, 2 days remote Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Reports to: Manager, Customer Education Purpose of Position: The Global Marketing Customer Education and Programs Team is responsible for delivering best in class, industry-leading Marketing Programs and Customer Education.
These programs and trainings deliver product awareness, solutions, and services through both hands-on and virtual educational offerings extending Client's Customers and Program Members product preference and brand loyalty.
The Training Coordinator, Customer Education will be responsible for supporting Customer Education initiatives such as supporting program members, training/alliance partners, and other applicable customers in the In-Building, Data Center, and Carrier Markets.
This person will take direction from the Manager, Customer Education to develop the annual education plan for USCAN.
They will project lead the development of class content, marketing materials, and class scheduling to ensure that the education plan is aligned with business strategy and is successfully executed.
The Customer Education team has a global footprint, and this role will be expected to have a cross-regional approach to ensure trainings and content within is supported uniformly within each region.
We support each other collectively to assist in team development, cross training and execution of events is vital! Additionally, is the expectation for cross-functional team support for paid classes, hands-on seminars, and field-level events.
Experience in marketing, customer service, and event management is recommended.
Fiber optic knowledge and training experience is helpful.
Major Roles and Responsibilities Growth and maintenance for customer training program that promotes and supports global marketing initiatives across markets and solutions.
Collaborate with Channel Marketing, Regional Marketing, Sales Engineers, Product Line Managers, and Engineering Services to identify Customer Education needs and future opportunities with a specific market audience.
With the direction and strategy from the Manager, Customer Education, develop and project manage Training Events both live and virtual to support the overall In-Building Network (IBN), Data Center and Carrier (CN) Sales strategy.
Collaborate with subject matter expects in Systems Engineering, Field Engineering, Application Engineers, and Regional/Applications Marketing regarding content and instructional design and develop or source training content and curriculum.
Work with Engineering Services and Field Engineering to build and maintain product samples and equipment to support class curriculum.
Collaborate with Distribution Branch Managers and Sales Engineers nationwide to coordinate logistics for live education classes.
Build promotional campaigns through marketing tools such as social media, marketing automation software and traditional inbound and outbound campaigns to support promotion of customer education events.
Maintain certifications and customer/program education records and report on results from Customer Education program.
Work with event planning software (Cvent) to set up accurate event registration/promotion, registration and after event reporting.
Establish and build relationships with external suppliers as needed.
Operate within a specified customer education budget.
Be available to provide basic customer support for program members.
Help maintain and develop program databases and processes to continually improve the training program.
As a representative of Client Optical Communications, ensure that you convey the highest level of integrity in behavior and appearance and help to fulfill all customer expectations as a premier supplier.
Skill and Knowledge Requirements: Education Requirement: BS/BA Marketing, Communications, or equivalent degree Required Experience: 2 years in marketing, communications, event planning or related experience Experience with instruction or training coordination and/or delivery preferred Desire to work with and learn software and cloud applications Required Skills: Planning and organizing Strong interpersonal skills Data gathering and analysis Problem analysis and problem solving Attention to detail Resourcefulness Basic knowledge and understanding of fiber optic networks What type of software will be used? Presentation Software (PowerPoint/Presenter) Microsoft Office SharePoint Marketing Automation Software (Marketo) Webinar Delivery Systems (AdobeConnect and WebEx Event Center) Social Media Platforms (LinkedIn) Event Planning Software (Cvent) This position does not support immigration sponsorship.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
Planning and Organizing, Problem Analysis and Problem Solving, Data Gathering and Analysis
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hari at (224) 507-1278 Title: Mechanical Drafting Technician II
- Hybrid Location: Concord, NC Duration: 12 Months Base Schedule:Monday
- Friday, 8 AM
- 5 PM OT Required: 45 hours per week target Work Environment: Employment will be through a third party on a contract basis.
Contracts will be 1 year in length and are often extended with satisfactory performance and additional project workload.
Hybrid work schedule available (work from home 3-4 days per week) Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: As a member of a global drafting department you will assist in the creation, revision, and storage of electronic drawing files (Autodesk Inventor and AutoCAD) for custom designed process equipment located in numerous worldwide Client Optical Fiber and Cable manufacturing locations.
Primary responsibilities include assisting the area drafting lead with completing all required work to an engineering/development drawing set prior to release into the system (Autodesk Vault).
Typical tasks include creating 3D models and associated drawings or editing existing models/drawings all while ensuring they follow company drafting standards: detail, sheet metal, weldment, and assembly drawings are typical.
No new design activity will be within scope of this position.
Key Responsibilities: Correct redlined models/drawings issued by drafting lead or engineering/development teams Convert legacy hand drawn and AutoCAD drawings into 3D models and associative drawings Create 2D drawings from existing 3D models from other users Collect data from engineering teams and incorporate information into appropriate drawing Collect measurements/information from production floor to incorporate into drawings Required Education: Candidates should possess one of the following, but other technical degrees with demonstrated skills in drafting will be considered: o A.A.S.
Mechanical Engineering Technology degree o A.O.S.
Drafting/CAD degree o Drafting Certificate/Certification Candidates without degrees must demonstrate proficiency in 2D and 3D drafting Required Experience and Skills: Minimum of 2 years professional experience in the mechanical drafting field Working knowledge of ASME/ANSI drafting standards General Windows-based computer skills Proficient in the use of Autodesk Inventor and Autodesk Vault software Able to adapt to company standards and guidelines Strong work ethic Strong attention to detail Interview Process: 1 Phone screen or Teams call 2 In Person Interview About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
AutoCad, Autodesk Inventor, ASME/ANSI, Autodesk Vault
Remote working/work at home options are available for this role.
Position is hybrid with requirement to travel to Sayre, PA at least once a month.
Summary:
The Engineer, Compute System Engineering is responsible for the implementation and support of compute based infrastructure, including public, private and hybrid cloud deployment models to support critical healthcare operations across The Guthrie Clinic (TGC). This role ensures high availability and performance for clinical systems, patient care services, and administrative functions across the network. The Engineer collaborates with IT teams, vendors, and hospital stakeholders to align server infrastructure with organizational goals and regulatory requirements. This position will be a technology advocate throughout the organization for the effective application of technology to meet business needs and to support business changes and growth. Technology functions include cloud computing, database, storage, data protection, virtualization, hyperconverged infrastructure, server automation, monitoring and application delivery.
Experience:
- Preferred three to five (3 to 5) years of experience in implementing and managing Windows and Open Systems server infrastructure hybrid cloud solutions in an enterprise environment; healthcare experience preferred.
- Highly experienced information systems professional with a strong technical background and proven track record of accomplishments in a large, complex multi-level organization .
- Strong technical knowledge of VMWare ESX and Microsoft Hyper-V.
- Expertise in Microsoft Windows, Linux and AIX operating systems and management.
- Familiar with hyperconverged infrastructures such as VxRail.
- Familiar with Microsoft Azure Arc, System Center, Admin Center and SCCM.
- Familiar with cloud platforms (e.g., AWS, Azure, Google Cloud).
- Experience in infrastructure-as-code (e.g., Terraform, CloudFormation) and containerization (e.g., Docker, Kubernetes).
- Experience in scripting (PowerShell, Python, Bash, etc.)
- Familiar with application delivery solutions such as Citrix.
- Experience with storage and data protection replication methodologies.
- Experience with Epic Infrastructure such as Hyperspace.
- Experience with ITSM functionalities such as change control, CMDB and ticketing systems.
- Strong knowledge of healthcare information systems (e.g., Epic, Cerner), cybersecurity and clinical operations.
- Prior experience delivering high availability systems in a 24/7 environment across geographically dispersed business units.
- Demonstrated ability to facilitate evaluation of technologies and achieve consensus on technical standards and solutions among a diverse group of information technology professionals.
- Demonstrated commitment to customer service who has provided responsive and effective support, developed solid working relationships with customers, and delivered high quality, value-added services that met/exceeded customer expectations.
- Equally adept at developing technology strategies and the operation of existing technical infrastructures. Significant experience and knowledge of computing architecture and implementation of networked computing structures.
- Polished professional with demonstrated information technology experience and strong communication skills that can rapidly gain and maintain credibility with customers and IT colleagues.
- Bachelor’s degree in Information Technology, Computer Science, Healthcare Administration or related field strongly desired or an equivalent combination of education and experience.
- Preferred certifications include Microsoft Certified: Azure Fundamentals, VCP-DCV, ECSA.
- Responsible for installation and maintenance of server infrastructure along with upgrading/configuration and the life cycle management of hardware.
- Monitors functions of server infrastructure to ensure acceptable performance.
- Creates and maintains documentation related to server configuration and environments.
- Serves as subject matter expert across server operating systems and solutions (Microsoft Windows Server, Linux, AIX, VMWare ESX, Microsoft Hyper-V)
- Troubleshoots and resolves server and virtualization incidents.
- Maintain server patching to address security vulnerabilities.
- Collaborate with cloud compute architect to design and build functional server environments.
- Provide level 2 escalation support and troubleshooting to resolve complex server incidents and tasks.
- Stay current on cloud and systems engineering trends (e.g., serverless computing, containerization, AI-driven automation) and evaluate their potential to enhance TGC operations.
- Ensure systems, applications and data are high availability, backed up and/or replicated to meet disaster and business recovery requirements.
- Implement and enforce security requirements to protect Azure-based systems and data.
- Anticipates and provides solutions for complex problems and issues, recommends upgrades and enhancements. Rapidly absorbs complex technical and conceptual information to identify issues and implications. Able to present understandable alternatives to both technical and non-technical individuals at all levels of the organization.
- Monitors industry trends, maintains knowledge of developments in cloud computing, database, storage, data protection, virtualization, hyperconverged infrastructure, server automation, monitoring and application delivery.
- Promotes the use of TGC’s PMO methodology and standards to manage IT initiatives.
- Demonstrates commitment to customer service by providing responsive and effective support, developing solid working relationships with customers and IT colleagues, and delivering high quality, value-added services that exceed customer expectations.
- Demonstrates a commitment to excellence in Customer Service with all internal and external customers of TGC.
- Performs related duties as assigned and unrelated duties as requested.
About Us
Joining the Guthrie team allows you to become a part of a tradition of excellence in health care. In all areas and at all levels of Guthrie, you’ll find staff members who have committed themselves to serving the community.
The Guthrie Clinic is an Equal Opportunity Employer.
The Guthrie Clinic is a non-profit, integrated, practicing physician-led organization in the Twin Tiers of New York and Pennsylvania. Our multi-specialty group practice of more than 500 physicians and 302 advanced practice providers offers 47 specialties through a regional office network providing primary and specialty care in 22 communities. Guthrie Medical Education Programs include General Surgery, Internal Medicine, Emergency Medicine, Family Medicine, Anesthesiology and Orthopedic Surgery Residency, as well as Cardiovascular, Gastroenterology and Pulmonary Critical Care Fellowship programs. Guthrie is also a clinical campus for the Geisinger Commonwealth School of Medicine.
Remote working/work at home options are available for this role.
