Engineering Geology Jobs in None, PA

We're seeking a knowledgeable and detail-oriented Heat Treat Process Engineering Supervisor to lead and support all aspects of the heat treatment operations with a focus on quality, compliance, and continuous improvement.

POSITION SUMMARY:

The Heat Treat Process Engineering Supervisor serves as a technical expert responsible for ensuring the proper thermal processing of materials to meet metallurgical and production requirements meeting all CQI-9 requirements. This role includes overseeing furnace operations, audits, documentation, process control, equipment maintenance, and continuous improvement initiatives.

The ideal candidate will have strong metallurgical knowledge, heat treat process experience, the ability to troubleshoot equipment and process issues, and the ability to manage compliance in a dynamic manufacturing environment. This role has direct supervisory responsibility for Lab Technicians, including scheduling, performance management, training, and ensuring compliance with laboratory testing standards and metallurgical validation requirements.

ESSENTIAL DUTIES (Complete):

• Oversee and manage daily heat treat operations including carburizing, hardening, tempering, and stress relieving
• Ensure compliance with AIAG CQI-9: Heat Treat System Assessment (HTSA) and other applicable standards
• Implement and maintain heat treat process control plans per AIAG guidelines
• Conduct and lead CQI-9 self-assessments, audits, and ensure closure of gaps and non-conformances
• Ensure proper setup, calibration, and operation of furnaces and quench systems
• Monitor thermal cycles and maintain control charts, pyrometry data, and process records per CQI-9
• Support system accuracy tests (SAT), temperature uniformity surveys (TUS), and instrumentation calibration activities
• Ensure all documentation meets internal and customer-specific AIAG compliance requirements
• Collaborate with Engineering, Maintenance, and Quality to address process improvements and problem-solving
• Perform metallurgical inspections including hardness testing and microstructure verification
• Provide technical guidance to operators and maintenance personnel on best practices
• Develop and optimize heat treat process parameters including atmosphere control, quench severity, and thermal cycle design to meet metallurgical and dimensional requirements
• Atmosphere verification (Carbon Potential, Dew Point, etc.)
• Distortion Mitigation Strategy
• Develop, implement, and maintain training programs to ensure team competency on heat treat systems and compliance
• Lead root cause analysis and corrective action efforts for heat treat-related non-conformities
• Utilize Lean Six Sigma principles to drive cost reduction, efficiency, and quality improvements
• Maintain proper traceability and process documentation for internal and external audits
• Provide technical direction for furnace troubleshooting, repair validation, and upgrade initiatives in coordination with Maintenance
• Perform other duties as assigned or required in support of production and quality goals
• Directly supervise Lab Technicians, including daily work assignments and workload balancing
• Approve timecards, PTO, and manage attendance
• Perform other duties as assigned or required in support of production and quality goals

CORE COMPETENCIES:

• Action oriented: Demonstrates ownership in solving process and compliance issues
• Self-Motivated: Demonstrates ability to take initiative and drive to achieve results. Proactively drives conformance with CQI-9 requirements and continuous improvement
• Accountability: Demonstrates ability to take responsibility and maintains sense of ownership and follow through on commitments. Sets high standards of performance.
• Communication: Demonstrates ability to convey and distribute information effectively and encompass strong speaking, presentation, written and listening skills. Ability to create an environment for open communication, and communicates clearly across departments regarding heat treat and compliance status
• Teamwork: Demonstrates ability to work well with others to accomplish common goals and build a positive climate and trusting relationships within teams.
• Leadership: Demonstrates ability to give direction, motivate, manage and reward performance, provide constructive feedback and foster individual professional development. Trains and guides operators to follow standard operating procedures and compliance guidelines
• Reliability: Demonstrates dependability, accountability and trust. Follows processes and meets commitments. Delivers consistent process performance and regulatory documentation
• Decision-making: Demonstrates ability to discover opportunities in challenges, seek profit and sustainable growth, make courageous while sound decisions and demonstrate a good business understanding. Applies analytical skills and CQI-9 knowledge to make data-driven decisions

KNOWLEDGE, SKILLS & ABILITIES:

• Thorough understanding of heat treatment principles, metallurgy, and thermal processing equipment
• Working knowledge of CQI-9 audits, checklists, gap closures, and AIAG documentation practices
• Familiarity with control system troubleshooting, PLCs, HMIs, and data logging
• Ability to supervise, mentor, and train heat treat personnel on compliance, safety, and process controls
• Skilled in conducting microstructure analysis and hardness testing to validate process results
• Strong organizational and record-keeping skills for always maintaining audit-readiness
• Proficiency in Lean Manufacturing, 5S, and Continuous Improvement
• Physically capable of working in a high-temperature, industrial environment
• Commitment to upholding process integrity and product conformance to specification

WORKING ENVIRONMENTAL CONDITIONS:

• Work involves exposure to high-temperature equipment, hot surfaces, and industrial environments. May encounter fumes, noise, and moving machinery. Personal protective equipment (PPE), including heat-resistant gloves, face protection, and hearing protection, is required. Occasional exposure to quenchants, chemicals, and elevated platforms is expected. Safety training and environmental awareness are critical components of the role.

SUPERVISORY RESPONSIBILITY:

• This role has direct supervisory responsibilities.

The demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions.

QUALIFICATIONS:

• Bachelors degree in Mechanical, Materials, Metallurgical, or Manufacturing Engineering required.
• Materials Science or Metallurgical Engineering preferred
• 7+ years of hands-on heat treat or metallurgical experience, preferably in automotive or aerospace manufacturing
• Demonstrated knowledge and application of CQI-9 Heat Treat System Assessment requirements
• Familiarity with AIAG standards and automotive core tools (APQP, PPAP, FMEA, SPC, MSA)
• Experience conducting and documenting SAT, TUS, and other pyrometry-related activities
• Experience operating batch and continuous furnaces, quench systems, and thermal processing equipment
• Demonstrates ability to directly supervise lab personnel including assigning work, evaluating performance, managing corrective actions, and developing team capabilities.
• Creates accountability, enforces standards, and drives measurable performance improvements.
• Proficient in hardness testing, blueprint reading, GD&T, and metallurgical inspection techniques
• Strong computer skills including Microsoft Office and plant data collection systems
• Excellent troubleshooting, documentation, and analytical skills
• Commitment to safety, quality, and environmental standards
• Ability to lead and train team members on technical and compliance-related topics
• Ability to work independently, manage multiple tasks, and prioritize effectively

Compensation details: 96 Yearly Salary

PI34bc9acf25ca-26289-39818891

Location: Remote: Reside close to (Exton, PA)

Portfolio: Allen‑Sherman‑Hoff (ASH) Engineered Material‑Handling Systems (ANDRITZ)

About the Role

Allen‑Sherman‑Hoff (ASH), an ANDRITZ business, delivers engineered material‑handling systems that support power generation, biomass, and pulp & paper facilities operating in demanding, continuous‑run environments. Although ASH is technically an OEM, we operate far more like an A&E/EPC engineering firm: we deliver system‑level engineered solutions, integrating ASH proprietary equipment with structural, mechanical, electrical, and quality requirements to meet strict performance expectations.

We are seeking a Project Manager with power, energy, utilities, or EPC/A&E engineered‑systems project experience, someone who has led large, customer‑facing technical projects through engineering, fabrication, manufacturing, quality, and site support.

If your background is in internal manufacturing operations, IT/telecom deployments, or continuous improvement, this role is not a match. We need a PM who understands industrial plant environments, engineered equipment, and the rigor of technical project delivery.

What You Will Do

Lead Full Lifecycle Execution (Sales Handover → Final Turnover)

• Own the delivery of engineered ASH material‑handling systems across power, biomass, and pulp & paper facilities.
• Drive engineering, drafting, and calculation packages to meet scope, schedule, and contractual requirements.
• Coordinate and unblock fabrication/manufacturing, ensuring manufacturability and compliance.
• Manage supplier RFQs, subcontractor performance, expediting, and logistics.

Quality & Technical Documentation Leadership

• Manage ITPs, weld maps, NDE requirements, pressure tests, dimensional checks, and documentation packages essential to engineered‑equipment delivery.
• Validate compliance to ASME/AWS, customer specifications, and ASH quality standards.

Schedule, Cost, and Risk Management

• Maintain schedule baselines using Primavera P6.
• Oversee cost performance, margin drivers, change control, and contract compliance.
• Identify and mitigate technical and execution risks early.

Customer‑Facing Project Leadership

• Serve as the primary interface between the customer and ANDRITZ technical teams.
• Prepare and deliver technical and commercial progress reports.
• Support site activities (FAT, readiness reviews, installation coordination, commissioning support).

What You Bring

Required

• Experience in A&E/EPC, power generation, utilities, or industrial engineered‑systems delivery.
• (Examples: material handling, conveying systems, rotating equipment, mechanical process systems, boiler/balance‑of‑plant equipment).
• Proven ability to lead engineering‑heavy, customer‑facing projects with strict contractual and QA requirements.
• Hands‑on coordination with engineering, fabrication, manufacturing, quality, suppliers, and field service.
• Experience managing ITPs, weld maps, NDE, pressure tests, QA documentation, and technical turnover packages.
• Proficiency in Primavera P6 and Oracle or similar ERP.
• Bachelor’s degree in Engineering/Construction Management OR 5+ years of relevant engineered‑systems PM experience.

Preferred

• Power plant, utilities, biomass, or pulp & paper industry experience.
• Background in ash handling, bulk material handling, or mechanical systems integration.
• PMP or CAPM certification.
• Experience with retrofit, outage, upgrade, or brownfield scopes.

Work Model

• Remote with periodic travel to Exton, PA, fabrication shops, and customer facilities for inspections, FATs, readiness reviews, and site support.
• Travel expected but varies by project phase.

Why This Role Matters

Your work directly affects the reliability, uptime, and environmental performance of major industrial facilities. When you execute well, a power plant runs cleaner, a pulp mill avoids downtime, and a customer sees ASH as a trusted engineering partner. This is real engineering impact, not back‑office project tracking.

*All qualified applicants will receive consideration without regard to protected characteristics.

Biomedical Equipment Engineering Manager

Philadelphia, PA (Onsite)

Salary: $145,000 + Full Benefits

Full-Time | Leadership Role

We are seeking a Biomedical Equipment Engineering Manager to lead the maintenance, troubleshooting, and operational reliability of medical equipment across a hospital environment in Philadelphia, PA. This is an onsite leadership role responsible for overseeing biomedical engineering operations, ensuring critical medical devices remain safe, compliant, and fully operational to support patient care.

This position will supervise biomedical equipment technicians and engineers while collaborating closely with clinical staff, hospital leadership, and vendors to maintain high standards for equipment performance, safety, and regulatory compliance.

The ideal candidate will bring a strong background in hospital-based biomedical equipment maintenance, medical device troubleshooting, and team leadership within a clinical environment.

Key Responsibilities

• Lead and manage a team of Biomedical Equipment Technicians (BMETs) and Biomedical Engineers responsible for hospital equipment maintenance and support

• Oversee preventive maintenance, repair, and calibration programs for a wide range of medical devices and clinical equipment

• Troubleshoot complex issues involving diagnostic, therapeutic, and patient monitoring equipment

• Ensure all equipment maintenance activities meet hospital regulatory requirements and accreditation standards including Joint Commission and FDA guidelines

• Develop and manage equipment lifecycle planning, including replacement strategy and capital equipment upgrades

• Coordinate with clinical departments to ensure equipment availability and minimize disruption to patient care

• Manage relationships with OEM vendors and third-party service providers for specialized repairs and service contracts

• Implement reliability improvements and maintenance best practices to increase equipment uptime and operational efficiency

• Maintain accurate records and documentation within CMMS / biomedical asset management systems

• Support new medical equipment installations, system integrations, and facility expansion initiatives

• Ensure compliance with hospital safety standards and biomedical engineering best practices

Required Qualifications

• Bachelor’s degree in Biomedical Engineering, Electrical Engineering, or related field

• 5+ years of biomedical equipment experience within a hospital or healthcare system

• 2+ years of leadership or supervisory experience managing biomedical technicians or engineers

• Strong expertise in medical device troubleshooting, maintenance, and preventive service programs

• Experience supporting equipment such as patient monitors, imaging systems, infusion pumps, anesthesia machines, ventilators, and diagnostic equipment

• Knowledge of Joint Commission standards, FDA regulations, and healthcare compliance requirements

• Experience using CMMS or biomedical equipment management systems

Preferred Experience

• Experience managing biomedical operations across multiple departments or hospital campuses

• Familiarity with network-connected medical devices and clinical technology systems

• Certification such as CBET (Certified Biomedical Equipment Technician) or related biomedical certification

Compensation & Benefits

• $135,000 base salary

• Comprehensive health, dental, and vision benefits

• 401(k) with company match

• Paid time off and holidays

• Opportunity to lead biomedical engineering operations in a mission-driven healthcare environment

The Efficiency Network, Inc. (TEN) is an independent energy-focused design/build contractor that provides building infrastructure upgrades and energy projects services to state, local, and federal government, K-12 education, higher education, healthcare, and large commercial and industrial customers. We help our clients address deferred maintenance, invest in infrastructure, improve the efficiency and sustainability of their buildings, and make their operations more resilient.

TEN applies state of the art technology, engineering, construction and project management concepts and practices, along with creative financing and ownership solutions, to deliver projects quickly and efficiently.

TEN is part of the Duquesne Light Holdings, Inc. family of companies.

Location : Pittsburgh HQ Hybrd 3 -days a week,

Summary:

Reporting to TEN’s Vice President, Engineering, the Director-Design Engineering is responsible for overseeing the development and supporting the delivery of multi-disciplined construction projects. This role ensures that all design outputs meet technical, regulatory, and quality standards while aligning with project objectives and client requirements. The Director – Design Engineering will collaborate closely with internal development, engineering, and construction teams while directing and managing external design professionals (architects and engineers) to translate conceptual designs into executable plan documents and constructable project strategies. The Director – Design Engineering plays a key role in ensuring that projects are designed in a safe and profitable manner and all associated project risks are identified and mitigated.

Location: The successful candidate is situated in the Pittsburgh, PA region and will work from the company’s office and a home-based office with travel to customer sites as necessary.

Responsibilities:

Design Phase Leadership & Commercial Strategy

• Lead and manage internal and external multidisciplinary design teams (architects, engineers, and consultants) through all phases of design within a Design/Build delivery model, from concept development through design completion.
• Define and control design scope, standards, schedules, and deliverables to ensure alignment with project objectives, contractual obligations, and client expectations.
• Lead and participate in commercial negotiations with owners, design consultants, and key trade partners related to design scope, fees, risk allocation, and change management.
• Facilitate design coordination and decision-making with clients, internal stakeholders, and external partners to resolve technical and commercial issues efficiently.
• Oversee development of coordinated, complete, and constructible design solutions that enable accurate pricing, competitive proposals, and predictable construction outcomes.
• Ensure designs comply with applicable codes, regulatory requirements, and owner standards while balancing cost, schedule, quality, and risk considerations.
• Direct preparation and review of design submittals, equipment selections, and technical packages, ensuring commercial alignment and securing required client approvals.
• Validate evolving cost estimates, contingencies, and allowances throughout design development, identifying risks, opportunities, and value engineering options to protect and enhance project margins.
• Proactively identify, assess, and mitigate design-related commercial risks, including constructability, scope gaps, escalation exposure, and design schedule impacts.
• Confirm designs are fully coordinated and commercially executable prior to construction handoff, minimizing downstream changes, claims, and margin erosion.

Construction Phase Design Oversight & Commercial Support

• Serve as the primary design authority during construction, providing technical leadership and commercial support to project managers, superintendents, and field teams.
• Support interpretation of drawings, specifications, and design intent while assessing cost, schedule, and contractual implications of design decisions.
• Review and respond to requests for information (RFIs), submittals, and design clarifications with a focus on minimizing commercial exposure and avoiding schedule disruption.
• Evaluate proposed field changes, substitutions, and value engineering initiatives for technical feasibility, constructability, cost impact, risk allocation, and contract compliance.
• Lead coordination with architects, engineers, design-assist partners, and subcontractors to negotiate and resolve design-related issues encountered during construction.
• Ensure all approved design changes are accurately incorporated into revised documents and as-built records, maintaining alignment with contract requirements.
• Monitor construction activities for adherence to approved design documents.
• Support commissioning, testing, and closeout activities to ensure systems perform as designed and contractual obligations are met.
• Maintain alignment between design intent, construction execution, and financial performance, actively supporting margin protection, change management, and dispute avoidance.

Education and Experience Required:

Required:

• Bachelor’s degree in Engineering, Architecture, or a related field.
• 10+ years of experience in detailed design, estimating, and commercial support within the building construction industry.
• Proven leadership managing multidisciplinary design teams in Design/Build environments.
• Demonstrated success in commercial negotiations with owners, consultants, and trade partners.
• Advanced proficiency in CAD/BIM platforms and design standards.
• Strong working knowledge of building codes, regulatory requirements, and industry best practices.
• Excellent communication, negotiation, problem-solving, and organizational skills with the ability to balance technical and commercial priorities.

Preferred:

• Leadership on large-scale, complex, multi-disciplinary Design/Build projects.
• Direct involvement in contract negotiations, design fee agreements, and change management.
• Strong track record of providing commercial and risk-management support to project delivery teams throughout the project lifecycle.

EQUAL OPPORTUNITY EMPLOYER

Duquesne Light Holdings is committed to providing equal employment opportunity to all people in all aspects of the employment relationship, without discrimination because of race, age, sex, color, religion, national origin, disability, sexual orientation and gender identity or status as a Vietnam era or special disabled veteran or any other unlawful basis, as defined by applicable law, and fostering a workplace free of unlawful discrimination and retaliation. This policy affects decisions including, but not limited to, hiring, compensation, benefits, terms and conditions of employment, opportunities for promotion, transfer, layoffs, return from a layoff, training and development, and other privileges of employment. An integral part of Duquesne Light Holdings' commitment is to comply with all applicable federal, state and local laws concerning equal employment and affirmative action.

Duquesne Light Holdings is committed to offering an inclusive and accessible experience for all job seekers, including individuals with disabilities. Our goal is to foster an inclusive and accessible workplace where everyone has the opportunity to be successful.

If you need a reasonable accommodation to search for a job opening, apply for a position, or participate in the interview process, connect with us at and describe the specific accommodation requested for a disability-related limitation.

Ainsley Search Group is hiring a Plant Engineering Manager with solid experience in plant engineering and maintenance management for a High Growth Manufacturer located in Chester County. This Plant Engineering Manager will report to VP of Operations, lead and develop a maintenance and engineering team and plan, optimize PM, optimize plant reliability and equipment performance output, further promote plant safety, and reliability, oversee the life cycle of major plant engineering projects. This is a full-time, permanent opportunity with lucrative compensation, bonus, benefit and growth.

Responsibilities:

• Lead, manage, mentor, and develop a plant engineering team, plan staffing outlook for maintenance and engineering team based on operational demand and make decision on hiring, training, etc.
• Report to VP of Operations and collaborate with cross functional teams to develop and implement a facility maintenance system, drive PM, reliability, process improvement on safety.
• Lead life cycle of major plant expansion, capital projects, oversee plant engineering projects design, execution, commissioning, close-out, manage contractor, equipment manufacturer, suppliers’ quality, performance and support contractor and supplier selection and qualification process.
• Develop, implement, and standardize maintenance practice, procedure and process across organization, plan and optimize resource for predictive and preventive maintenance, lead and manage plant maintenance programs, oversee equipment inspections, support safety and reliability training to optimize overall plant safety, reliability, and efficiency.
• Manage budget, cost and budget planning for all plant engineering projects, maintenance programs, identify area of cost saving opportunities and drive cost saving initiatives.
• Lead the security, sanitation, janitorial, utility, and property management programs across plant, create and maintain master site plan and collaborate with safety and EHS to ensure compliance with OSHA, GMP and EHS regulations.
• Collect, analyze maintenance data, KPI and operational data to track, monitor up-time, down-time performance on plant systems such as chiller, HVAC, condensate systems, plant steamer, etc, identify root causes and opportunities of improvement, further achieve higher efficiency, accuracy, cost saving on equipment performance output.
• Collaborate with EHS, Reliability Engineer, Project Engineer to support new capex investment, installation, commissioning, upgrade, routine maintenance, repair, and upgrade.
• Collaborate with Process, Quality, Reliability engineering and senior management, based on operational data, analysis to support CI, sustain and promote process safety, equipment reliability, and optimize operational output.
• Collaborate with executive management team on strategic planning regarding plant expansion, major capex investment, maintenance program, etc.
• Lead the new plant site design, development projects from start to finish, develop and modify new plant layout and expanded layout for existing plant facility.

Qualifications:

• Bachelor’s Degree in technical degree is a plus, higher education desired.
• Recent years of tenure as a hands-on senior leader as Plant Engineering Manager, or related roles within manufacturing industry, expose to high yield, fast speed automated manufacturing environment required.
• Hands-on leadership skill, ability to establish rapport and hold subordinates accountable, ability to restructure and develop a team.
• Strong analytical and problem-solving skill, strong knowledge in Project Management skill.
• Strong mindset in process improvement, process safety and reliability, ability to make difficult decision independently.
• Proficient in Microsoft Suite, CMMS and ERP based systems.
• Aspiration to advance to senior management level

Compensation and Benefit:

• Lucrative compensation
• Yearend bonus
• 401k with match
• PTO
• Paid Holidays
• Health, dental and vision
• Life Insurance
• Disability Insurance
• Tuition Reimbursement
• Relocation Assistance

STV is looking to hire a civil engineering design professional to be the Pittsburgh Area Manager. In this highly visible role, you'll drive growth, market diversification and provide exceptional leadership to our growing and dynamic Pittsburgh transportation Group.

As the Area Manager for the Transportation Group across Pittsburgh, Pennsylvania, you are the highest-ranking executive of STV's Transportation Group for your region. Your performance creates a vibrant, growth-oriented, collaborative, and robust business that is seen as an active member of the communities in which you operate, a trusted advisor to your clients, a valued teaming partner, a leader in the industry, and a formidable competitor.

Our market sectors span across highway and bridge design, transit, and planning, working for clients such as the Pennsylvania Department of Transportation, Pennsylvania Turnpike, City of Pittsburgh, Pittsburgh Regional Transit, Allegheny County, and others. Under your leadership, you will mentor and lead an existing team of managers, engineers, inspectors, planners, and construction managers while building strategies to expand into other untouched markets across western Pennsylvania.

Joining STV's Pennsylvania Transportation Group, you will work closely with market sector leaders, discipline leaders, and other regional area managers to deliver comprehensive engineering, planning, design, construction & inspection services.

You'll be accountable for planning and organizing the business and for making the operational decisions necessary to achieve STV's desired strategic and annual outcomes for the Area. These outcomes include targets and objectives for client relations, growth, project performance, efficiency, and talent development.

Representing STV with clients, the industry, and the broader community across western Pennsylvania, particularly with strong connections within the Pittsburgh metropolitan area.

Working with STV client service team leaders to ensure STV enjoys a robust relationship with its clients.

Maintaining close professional relationships with key people at client, teaming partner, industry, and community organizations.

Creating and implementing plans that align with and achieve STV's strategic plan objectives.

Identifying, recruiting, and developing talent with the aim of growing the business and ensuring a strong line of succession for key leadership roles in the operation.

Providing effective management of STV's local business activities including selection of STV's client mix and services offering, adding new clients, winning new work, execution of projects, hiring locally based personnel, resource planning, and controlling overhead expenditure.

Ensuring the operation adheres to STV's policies and procedures.

Identifying, mentoring, and training the next generation of future leaders.

Analyzing and understanding client, business, and industry issues that potentially affect STV's business in western Pennsylvania and preparing plans to position STV to capitalize on those trends.

Assessing the performance of the STV team members and taking action to rectify any shortfalls against expectations and to recognize and promote those of exceptional ability.

Analyzing and reporting on business performance and implementing timely measures to address adverse outcomes to ensure financial goals are achieved.

Have 20+ years of experience in relevant Transportation market sectors with a proven track record in business development and operations.

Educational Background: BS/MS in Engineering.

Professional Registration: Registered Professional Engineer (PE) or Planner (AICP) in Pennsylvania (and preferably additional states).

Market Specialization: You'll be a subject matter expert in one or multiple disciplines such as highway design, structural design, hydraulics, construction management, planning or Transit.

Multi-Disciplinary Technical Leadership: You will be a proven leader of multi-disciplinary design, CM or Inspection teams and have delivered a range of projects from concept to close as the Project Manager.

Business Growth: You will enjoy being both externally and internally facing, driving new business, optimizing relationships with existing clients, leading proposals/pursuit strategies along with leading a growing team of engineers and planners.

As one of the nation's top transportation design and engineering firms, you'd be joining a highly regarded leadership team at STV whose approach reflects the tenets of smart growth and sustainable development. In terms of project delivery and the growing emphasis on design-build procurement and privatization, STV has a track record working hand-in-hand with government agencies, contractors, and developers, as well as involving the local community to incorporate stakeholder feedback and foster community support.

If you are a dynamic leader with a passion for driving growth and innovation in the Transportation industry, we invite you to apply for the Pittsburgh Area Manager position at STV. Apply now and join a team that values excellence, collaboration, and professional development.

Compensation Range: $205,316.83 - $228,129.81

STV offers the following benefits:

Health insurance, including an option with a Health Savings Account

Dental insurance

Vision insurance

Flexible Spending Accounts (Healthcare, Dependent Care and Transit and Parking where applicable)

Disability insurance

Life Insurance and Accidental Death & Dismemberment

401(k) Plan

Retirement Counseling

Employee Assistance Program

Paid Time Off (starting at 16 days)

Paid Holidays (9 days)

Back-Up Dependent Care (up to 10 days per year)

Parental Leave (up to 80 hours)

Continuing Education Program

Professional Licensure and Society Memberships

STV is committed to paying all of its employees in a fair, equitable, and transparent manner. The listed pay range is STV's good-faith salary estimate for this position. Please note that the final salary offered for this position may be outside of this published range based on many factors, including but not limited to geography, education, experience, and/or certifications.

Not sure this role is the perfect match? We encourage you to apply if STV's work and values resonate with you. We know great candidates don't always meet every qualification, and research shows women and people of color are less likely to apply unless they do. At STV, we believe strong talent comes from a wide range of backgrounds, and your skills and experience may align with this or another opportunity as we continue to grow.

About Precis

Precis Engineering + Architecture (Precis) is a 150+ person consulting firm with offices in Ambler, Pa., and Cary, N.C., offering comprehensive design services. Precis has been repeatedly recognized as a Best Place to Work by the Philadelphia Business Journal.

Position Overview:

The Automation Engineer supports the Ambler, Pa., office with 3 years or more of experience in the design and implementation of industrial automation systems for the pharmaceutical + biotechnology, chemical, and/or building systems markets. This individual must have a strong engineering background and an understanding of instrumentation, control, and automation systems hardware and software design, testing, and implementation. Experience in Allen Bradley PLCs, Siemens Building Automation Systems, and/or the DeltaV DCS platform is preferred.

The individual will be resourceful and goal-oriented, desiring challenging work in a dynamic environment. The individual will be responsible for generating automation-related project deliverables such as P&IDs, loop sheets, control panel designs, instrument specifications, software specifications, testing protocols, and corresponding narratives and reports.

Key Responsibilities:

• Knowledge in design and implementation for process, utility, and building automation systems.
• Experience with major automation system vendors including Allen Bradley, Siemens, Honeywell, ABB, and Emerson.
• Familiarity of systems integration technologies and approaches.
• Experience in automation system implementation/migration projects and upgrades required.
• Knowledge of cGxP requirements as they relate to automation systems preferred.
• Present automation system designs at client meetings.
• Interface with third-party control system vendors.
• Develop new clients, maintain and expand the relationship and scope of work with existing clients.

Competencies

• Automation systems hardware and software
• Industrial and process instrumentation
• Strategic thinking, problem solving, and analysis
• Customer/client focus
• Communication proficiency
• Time management

Qualifications

• B.S. in Chemical, Electrical, or Mechanical Engineering or related major required.
• Minimum of 3 years of experience in the field.
• The ability to work well with others, lead a team, and manage in matrix teams and environments with multiple clients.
• Experience in automation systems design and implementation.
• Experience in industrial and process instrumentation types, technologies, and specification.
• Effective presentation, written, and verbal communication skills.
• Excellent organizational, planning, and time management skills.
• Logical thinking with creative problem-solving skills.
• Familiar with a variety of the field's concepts, practices, and procedures.

Why Join Precis?

• Be part of a collaborative, innovative team that values your ideas and expertise.
• Shape growth for a respected, specialized engineering and architecture firm.
• Enjoy a flexible, supportive work environment and competitive compensation package.

Equal Opportunity Employer

Precis provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics.

Title: Design Technician / Design Technician II – Electric Distribution

Location: Remote (Preference for Philadelphia, PA / Southeastern PA / New Jersey)

Hire Type: Contract-to-Hire

Shift/Hours: Monday–Friday, standard business hours

Base Salary: $21-24/hour (DOE)

Benefits: Medical, Dental, Vision; PTO; 401(k); Career Growth Opportunities

About the Opportunity

An engineering organization is seeking Design Technicians to support electric distribution and substation infrastructure projects. This role focuses on developing utility design packages using MicroStation, supporting large-scale infrastructure projects, and applying electric utility standards. The Design Technician I role is ideal for candidates with foundational experience, while the Design Technician II role is intended for candidates with greater independence and deeper electric distribution design expertise.

Job Duties

• Develop electric distribution design packages based on project maps, data, and utility standards.

• Create and modify design drawings using MicroStation.

• Support substation and large-scale utility infrastructure projects.

• Apply electric utility design standards, specifications, and engineering criteria.

• Collaborate with engineering and project teams to ensure design accuracy and completeness.

• Translate project inputs into constructible design documents.

• Maintain organized design documentation and drawing files.

• Support multiple projects while meeting schedule and quality requirements.

Qualifications

• High school diploma or equivalent required.

• Design Technician I: Typically 1–3 years of electric utility design or drafting experience.

• Design Technician II: Typically 3+ years of electric distribution design experience.

• MicroStation proficiency required.

• Experience supporting electric distribution infrastructure projects.

• Ability to interpret utility base maps and project design inputs.

• Strong communication, collaboration, and attention to detail.

Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin.

Overview & Purpose

Precis Engineering is seeking a mid-level Process Utilities Engineer with 5 years or more of experience focusing on the design and implementation of Clean Utility Systems (WFI generation and purified water systems) and Equipment Cleaning in Place (CIP) systems for the pharmaceutical, biotechnology, and/or chemical industries. This individual must have a strong engineering background and a thorough understanding of equipment design, CIP design, US Pharmacopia and BPE standards.

The individual will be resourceful and goal-oriented, desiring challenging work in a dynamic environment. Process is a young business endeavor for Precis and this individual will have an entrepreneurial and strategic mindset towards the long-term growth and viability of the group. He/she will be comfortable in a process execution role as well as representing the process discipline as a technical resource on larger, multi-discipline project teams. The individual will work be responsible for generating process-related project deliverables such as P&IDs, utility diversity calculations, user requirements, equipment specifications, piping design, and corresponding narratives/reports.

Responsibilities

• Responsible for execution and coordination of multi-discipline engineering teams for process projects comprised of Precis, client, and third-party personnel.
• Work in conjunction with a subject matter expert in design and implementation for process and clean utilities for pharmaceutical manufacturing clients.
• Experience with major clean utility and Cleaning equipment manufacturers.
• Prepare and review systems calculations, drawings, and specifications.
• Familiarity of instrumentation and automation and control approaches.
• Knowledge of cGMP requirements with respect to operations and manufacturing facility design.
• Ability to communicate and articulate process design deliverables and convey the project needs to complete construction drawing deliverables to clients and partners/
• Be able to manage work to a budget and schedule and report status to project oversight.

Qualifications

• B.S. in Chemical Engineering or related major required.
• Minimum of 5 years of experience in the field.
• The ability to work well with others, lead a team and manage in matrix teams and environments with multiple clients.
• Experience in process utility design and implementation.
• Experience in process deliverables such as Process Flow Diagrams, P&IDs, piping drawings and equipment specifications.
• Experience with AutoCAD and Revit drafting software.
• Delegation negotiating, and team skills.
• Effective presentation, written and verbal communication skills.
• Excellent organizational, planning, and time management skills.
• Logical thinking with creative problem solving skills.
• Understanding of budget control.
• Familiar with a variety of the field's concepts, practices, and procedures.

Competencies

• Process Engineering with a Focus on Process Utilities & CIP Equipment
• Specification of Process Equipment and Instrumentation
• Strategic Thinking/Problem Solving/Analysis
• Customer/Client Focus
• Communication Proficiency
• Time Management

Education / Licenses

• BS degree in Chemical Engineering or related
• Professional Engineer (PE) License, or FE Preferred

ARM Group LLC is looking for a self-driven and energetic Staff Engineer who is looking to grow and embodies an ownership mentality. The Staff Engineer will collaborate with a team of multi-disciplined engineers and scientists, project managers, CAD designers, and other staff to service our client’s needs. This role will support a wide range of projects related to our Energy & Power practice area in the areas of erosion and sediment control design, stormwater management design, and land development engineering.

The successful candidate will assist in performing engineering calculations, writing reports, and creating/updating design drawings using CAD and assist with client and regulator communications. This role may also support our solid waste management, environmental services, geotechnical engineering, oil and gas, water resources, and construction administration practice areas.

Location: This position can be filled in our Hershey, PA office.

Requirements

• Prepare, review, and update design drawings and investigation reports for commercial/industrial and utility scale solar projects throughout the Mid-Atlantic region.
• Observe and monitor field work to analyze possible problems.
• Perform and/or check technical calculations related to erosion and sediment control design, stormwater management design, and related land development engineering.
• Research code, zoning, ordinances, and other requirements as needed to ensure project compliance.
• Prepare reports, letters, emails, permit applications, etc. for projects.
• Collaborate with other team members to meet deliverables on project and obtain further knowledge and experiences.
• Effectively communicate with key stake holders including project manager, project engineers, and other members of the project team.
• Pro-actively recognize conditions and problems of non-routine nature, develop solutions, and seek guidance when needed.

Base Requirements:

• Bachelor's degree or equivalent in engineering (Civil or Environmental) from an accredited four-year college or university.
• Experience with Autodesk Civil 3D or equivalent engineering software.
• A self-starter possessing strong communication, planning and organizational skills.
• Desire to work on multiple projects in parallel rather than a single large project for months.
• Proficiency in Microsoft Office Suite.
• Requires travel to job sites and occasionally out of the local area overnight stay.
• Valid drivers license

Preferred Requirements:

• E.I.T. certification preferred, but the opportunity to obtain certification can be developed.

Your Wellness, Our Priority: A Look at Our Benefits

We invest in our team's well-being and future through a comprehensive benefits package with a range of offerings designed to support you holistically. Our health and wellness offerings include two Health Insurance options (Traditional PPO and QHDHP with an HSA), vision and dental coverage, life insurance, disability protection, accident and critical illness coverage. To enhance your future financial security, we provide a 401(k) with company match, HSA/FSA accounts, and 529 college savings plans. Work-life balance is prioritized through our generous PTO starting at 15 days per year and 10 paid holidays per year, giving you ample time to rest, recharge, and attend to life outside the office. An Employee Assistance Program is provided to you and your household with resources to assist you in managing a variety of situations. We invest in your professional growth through our Tuition Reimbursement program and continuing education opportunities. After 6 months of employment, all team members become eligible for quarterly bonuses, providing additional avenues for financial growth. This robust package is designed to foster a workplace where you can thrive both personally and professionally, underscoring our dedication to your overall well-being and future success.