Electronic Parts Explained Jobs in Usa

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

We are seeking a highly motivated, experienced Principal Software Engineer to be an active participant in the software development team for Electronic Warfare (EW) projects, working with cutting edge technologies in products that protect our warfighters.  

What You Will Do:

• Technical leadership and participation on collaborative, cross-disciplined integrated product teams, often employing agile system and software development operations to plan, specify, design, test, and integrate complex software and systems solutions.
• Responsibilities include inventions and innovations of new products and technologies, from architecture and design, through integration, lab test and field test.
• Collaborating effectively with other disciplines and senior technical staff, in addition to producing planning and technical work products for internal customers to form original solutions to complex problems.
• Developing software requirements and FPGA level interface requirements derived from system level requirements, developing associated architectures, performing simulations and analysis and testing of the software in a laboratory setting.
• Work in an advanced product development team environment with systems, firmware, electrical and software engineers. Think out-of-the box to root-cause issues and develop creative resolutions.
• Handle fast pace and dynamic product development environment including engagement with Systems' and Electrical Engineers
• This position will require occasional business-related travel.  

Qualifications You Must Have:

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) AND a minimum of 8 years of prior relevant experience.
• Experience in software design, development, integration and test utilizing C / C++.
• Experience with embedded microprocessors, system on a chip software design, FPGAs, high-speed transceivers, DDR, flash memories, block diagrams, signal analyses or signal generation.
• Experience developing real-time applications on embedded platforms, including bare metal (no-OS), embedded Linux, or Windows environments.
• The ability to obtain and maintain a Secret U.S. government issued security clearance. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.
   

Qualifications We Prefer:

• Existing Secret security clearance.
• Electronic Warfare Electronic Attack/Electronic Support (EA/ES), Radar, or Secure Communications technology knowledge.
• Experience with .NET C# using WPF and MVVM.
• Tool familiarity: Visual Studio, Vitis, TortoiseSVN, Jenkins, Jira, Collaborator.
• DevSecOps background including pipeline toolset use and creation.
• Lab experience in product testing using logic analyzers, high-speed oscilloscopes, signal generators, and system on chip debugging tools.
• Experience with interfaces and bus standards such as: VME, PCI, PCIe, VPX, or Gb Ethernet.
• Experience in software lifecycle phases: software architecture, system/software requirements analysis, design, implementation, verification testing, system integration, and post-delivery maintenance.
• Experience with Radar technology, machine languages.
• Experience with software algorithm development.
• Experienced in Agile development processes.
• Experience with machine learning.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

• A total rewards package that goes above and beyond with compensation; healthcare, wellness, retirement, and work/life benefits; career development and recognition programs.

• Relocation Eligible – Relocation assistance available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: EW

  #EmbeddedSoftware

  As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

  The salary range for this role is 118,300 USD - 224,900 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

  RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

  Privacy Policy and Terms:

  Click on this link to read the Policy and Terms

Company/Location: Avtec Finishing / New Hope MN

Shift: 3p-1a M-Th (+OT as needed) That's a 4 day work week!

Pay: $23 /hr

Signing Bonus: $1500

(Employment/staffing agencies - please do not reach out about this ad. We only hire direct.)

____________________

Metal finishing and plating touches everything - medical devices, aerospace, defense, tools, hardware, and critical U.S. manufacturing. Most people don't know this industry exists. That's okay.

Our trade is not taught in schools. We'll train you!

What we can't train? Work ethic. Reliability. Initiative.

If you show up, stay focused, and want to grow - this is a real career path with long-term opportunity!

____________________

Attendance matters:

We rely on our team being here when scheduled. Our success depends on employees that show up to work. That means showing up every day, on time, and not leaving early. We reward strong attendance with bonuses!

Strict security protocols:

Personal mobile devices must be locked up during shifts (available only on breaks and in designated areas).

Warehouse environment: Exposure to heat, humidity, dust, and noise. This is hands-on, active work. We have a clean warehouse and are compliant with OSHA, Federal, and State regulations.

Career-oriented: Youll have the chance to grow with us if you bring a strong work ethic and initiative. Growth can be becoming an expert in the position, becoming a lead/trainer, changing departments, or going into a supervisor/manager role. It all depends on what interests the employee and the effort put forth by the employee.

We conduct in-person interviews only:

This position is located in Minnesota. We do not conduct virtual interviews. If you do not currently reside in MN, you must have definite relocation plans in place before being considered for an interview. There is a place to explain in the screener questions included with this ad.

____________________

What You'll Do (Entry Level Duties)

• Count, rack, and prepare parts for finishing
• Inspect parts for quality and accuracy
• Complete paperwork to ensure smooth processing
• Pack finished products to ship back to customers
• Follow safety and production guidelines in a fast-paced, hands-on warehouse environment

This is active workyoull be on your feet, using your hands, and staying focused. If you like staying busy and seeing tangible results of your efforts, youll thrive here!

____________________

What We're Looking For

• Reliable attendance and strong work habits (showing up matters hereyour team counts on you!)
• Ability to follow directions, and work safely
• Attention to detail
• Basic math and measuring skills
• Comfort with tools like rulers/tape measures and digital systems (computers/tablets)
• Teamwork and cooperative mindset
• U.S. work authorization
• MUST be able to speak, read, write, and understand English

____________________

What We Offer (Perks & Benefits)

We invest in people who invest in their work.

• Competitive Pay and Signing Bonus)
• Work-Life Balance: 4-day work week (MonThurs) + overtime on Friday as needed
• Reviews & Raises: Performance reviews at 60 days, 6 months, then twice a yearraises available if expectations are met
• Bonuses: Quarterly profit-sharing + attendance rewards
• Paid Time Off: Holidays, PTO, Sick & Safe time, and an extra paid day off for your work anniversary
• Retirement Support: 401k with company contributions
• Insurance Coverage: Medical, Dental, Vision, Life insurance, Long-Term Disability, Pet, FSA, and more!
• Paid Extras: Uniforms, prescription safety glasses, safety boots, referral bonuses, and more

____________________

APPLICATION PROCESS:

• Upload a current resume & answer the questions provided (completing this task provides a little insight into you and helps us determine the best candidates to interview). Thoughtful answers are expected.
• No need to reach out and verify if the application was received. If you receive an email/text response when you submitted the application, then you'll know it was received. Contacting HR does NOT increase chances of an interview.
• If you are selected for an interview, you will be contacted via text/email. (As part of our selection process, while onsite for an interview, you MUST PASS A BASIC MATH TEST within 10 minutes to move on to the interview phase.)
• Expect a response within 14 days of your application.

____________________

Security: This position operates within a a secure manufacturing facility. All employees must adhere to strict security policies including restrictions on personal electronic devices, access control, and documentation procedures.

Equal Opportunity Employer. The Lindgren Group, including Avtec Finishing and Nico Products, is an equal opportunity employer and is committed to creating an inclusive environment for all employees. Veterans are encouraged to apply!

Work Authorization / Security Clearance:

The Lindgren Group must comply with ITAR (International Traffic in Arms Regulations). These regulations may restrict persons of non-US citizen status from working/participating/observing/or other forms of gathering knowledge about certain activities within the company.

Disclaimer:

This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time, with or without notice.

For more information on our company, visit:

Company/Location: Avtec Finishing / New Hope MN

Shift: 5a -3p M-Th (+OT as needed) That's a 4 day work week!

Pay: $21 /hr

Signing Bonus: $1500

(Employment/staffing agencies - please do not reach out about this ad. We only hire direct.)

____________________

Metal finishing and plating touches everything - medical devices, aerospace, defense, tools, hardware, and critical U.S. manufacturing. Most people don't know this industry exists. That's okay.

Our trade is not taught in schools. We'll train you!

What we can't train? Work ethic. Reliability. Initiative.

If you show up, stay focused, and want to grow - this is a real career path with long-term opportunity!

____________________

Attendance matters:

We rely on our team being here when scheduled. Our success depends on employees that show up to work. That means showing up every day, on time, and not leaving early. We reward strong attendance with bonuses!

Strict security protocols:

Personal mobile devices must be locked up during shifts (available only on breaks and in designated areas).

Warehouse environment: Exposure to heat, humidity, dust, and noise. This is hands-on, active work. We have a clean warehouse and are compliant with OSHA, Federal, and State regulations.

Career-oriented: Youll have the chance to grow with us if you bring a strong work ethic and initiative. Growth can be becoming an expert in the position, becoming a lead/trainer, changing departments, or going into a supervisor/manager role. It all depends on what interests the employee and the effort put forth by the employee.

We conduct in-person interviews only:

This position is located in Minnesota. We do not conduct virtual interviews. If you do not currently reside in MN, you must have definite relocation plans in place before being considered for an interview. There is a place to explain in the screener questions included with this ad.

____________________

What You'll Do (Entry Level Duties)

• Count, rack, and prepare parts for finishing
• Inspect parts for quality and accuracy
• Complete paperwork to ensure smooth processing
• Pack finished products to ship back to customers
• Follow safety and production guidelines in a fast-paced, hands-on warehouse environment

This is active workyoull be on your feet, using your hands, and staying focused. If you like staying busy and seeing tangible results of your efforts, youll thrive here!

____________________

What We're Looking For

• Reliable attendance and strong work habits (showing up matters hereyour team counts on you!)
• Ability to follow directions, and work safely
• Attention to detail
• Basic math and measuring skills
• Comfort with tools like rulers/tape measures and digital systems (computers/tablets)
• Teamwork and cooperative mindset
• U.S. work authorization
• MUST be able to speak, read, write, and understand English

____________________

What We Offer (Perks & Benefits)

We invest in people who invest in their work

• Competitive Pay and Signing Bonus)
• Work-Life Balance: 4-day work week (MonThurs) + overtime on Friday as needed
• Reviews & Raises: Performance reviews at 60 days, 6 months, then twice a yearraises available if expectations are met
• Bonuses: Quarterly profit-sharing + attendance rewards
• Paid Time Off: Holidays, PTO, Sick & Safe time, and an extra paid day off for your work anniversary
• Retirement Support: 401k with company contributions
• Insurance Coverage: Medical, Dental, Vision, Life insurance, Long-Term Disability, Pet, FSA, and more!
• Paid Extras: Uniforms, prescription safety glasses, safety boots, referral bonuses, and more

____________________

APPLICATION PROCESS:

• Upload a current resume & answer the questions provided (completing this task provides a little insight into you and helps us determine the best candidates to interview). Thoughtful answers are expected.
• No need to reach out and verify if the application was received. If you receive an email/text response when you submitted the application, then you'll know it was received. Contacting HR does NOT increase chances of an interview.
• If you are selected for an interview, you will be contacted via text/email. (As part of our selection process, while onsite for an interview, you MUST PASS A BASIC MATH TEST within 10 minutes to move on to the interview phase.)
• Expect a response within 14 days of your application.

____________________

Security: This position operates within a a secure manufacturing facility. All employees must adhere to strict security policies including restrictions on personal electronic devices, access control, and documentation procedures.

Equal Opportunity Employer. The Lindgren Group, including Avtec Finishing and Nico Products, is an equal opportunity employer and is committed to creating an inclusive environment for all employees. Veterans are encouraged to apply!

Work Authorization / Security Clearance:

The Lindgren Group must comply with ITAR (International Traffic in Arms Regulations). These regulations may restrict persons of non-US citizen status from working/participating/observing/or other forms of gathering knowledge about certain activities within the company.

Disclaimer:

This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time, with or without notice.

For more information on our company, visit:

The Tempus Electronic Visit Verification (EVV) Compliance specialist has a key role in supporting the state and the agency partners in ensuring PCA program participants are compliant with the use of EVV and the EVV policies. This role is responsible for implementing and overseeing the Tempus FI aspects of the EVV Compliance policies set forth by MassHealth and ensures Tempus FI satisfies contract requirements.

This role involves a broad range of tasks including: preparing compliance reports and dashboards for the state, agencies and internal teams, monitoring EVV compliance metrics and supporting CMS-related reviews and compliance assessments, overseeing/initiating needed changes to the PowerBI dashboard, researching non-compliance cases, assisting with corrective action plans and/or process improvements, and communicating across departments, with MassHealth and other contracted agencies. This role and associated activities will evolve as EVV compliance requirements increase with the maturity of the implementation.

• Stoughton, Massachusetts office only
• First week in person for training
• Hybrid model observed after training

Essential Job Functions

Serve as primary EVV compliance liaison between:

• EVV Project Leader
• EVV Reporting Analyst
• State program and policy teams
• EVV system vendor
• Call center and support operations
• Training and quality teams
• MassHealth
• PCM Agencies

Analytics

• Maintain and monitor EVV dashboard for EVV usage, program rules violations and other data trends
• Monitor, prepare and share compliance reports for MassHealth and the agencies—which includes analyzing the data to ensure data quality, and to monitor common themes/trends
• Prepare additional reports and present information, as needed, for senior leaders and MassHealth as necessary

Operations

• Monitor the effectiveness of current compliance procedures and tools and lead the efforts to continuously improve to achieve the needed results e.g., identifying breakdowns and root causes and communicating and implementing changes
• Support the development of any new EVV Standard Operating Procedures
• Participate in EVV governance, change-control and system enhancement discussions

• Understand barriers or root causes of why individuals are not compliant and drive remediation plans
• Work with system vendor and EVV SME to resolve technical issues affecting compliance

Research Escalations and Support Communications

• Perform compliance-related research to answer questions or determine if an issue is non-compliant
  • Support requests received by MassHealth/Program Integrity Team
  • Support agencies and/or work in partnership with EVV Support
• Support state-led outreach and communications related to EVV compliance expectations
• Perform escalation follow-up for non-compliant individuals as necessary
• Oversee the communication plan for EVV Compliance:
  • Draft, modify, and distribute EVV compliance communications
  • Send PCA non-compliance list to the EVV Support team who assist with PCA outbound calls
  • Create lists for Everbridge compliance messages and collaborate with IT to monitor the process.
  • Send address list to Mailing Department for warning letter preparation
  • Manage all incoming/outgoing EVV compliance-related emails and escalating any observed trends or case specific

Training

• Collaborate with the training and knowledge management teams to ensure EVV guidance is accurate and contract aligned
• Provide EVV Compliance training to Tempus operations teams and other individuals as necessary
• Review EVV job aids, FAQs, scripts and training content for compliance accuracy

Risk Management

• Identify compliance risks and recommend process improvements to strengthen compliance and reduce/eliminate inefficiencies.

Competencies

• Strong understanding of compliance governance, auditing and regulatory frameworks
• Strong analytical capabilities to assess data and processes and articulate insights
• Experience leading a process and implementing continuous improvement—including researching root causes and implementing changes
• Ability to maintain and communicate in-depth knowledge of the MassHealth Compliance standards and regulations
• Experience with data tools (Excel and PowerBI)

• Methodical and diligent, outstanding planning abilities

• Strong written and oral communication skills
• Professional, friendly & understanding personality
• Ability to work independently while functioning effectively as a team member
• Self-motivated

Qualifications

• Bachelor’s Degree required (Public Administration, Health Administration, Social Services, Business or related field)
• 5-7 years' experience in compliance, healthcare administration, Medicaid, home and community-based services or similar environment

Work Environment

This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, and scanners.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

While performing the duties of this job, the employee is regularly required to talk and/or hear. The employee is frequently required to sit; stand; walk; use hands and fingers and also must be able to reach with hands and arms. Must be able to lift up to 15 pounds at times.

Travel

Travel may be required for this position.

Other Duties

Note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Benefits

Tempus Unlimited offers great benefits that foster a happy fulfilling human work experience. We also have an array of growth opportunities for our employees to develop your career and enhance your experience.

• Sign on bonus
• Work/Life Balance
• Paid time off - 25 days per year for full time staff
• 14 paid Holidays
• Tempus Wellness - Medical, Dental, Dependent Care Reimbursement, FSA and HSA
• Basic Life, Short Term and Long-Term Disability
• On-site gym (Stoughton Location) and wellness initiatives
• Annual Reviews with merit-based increases
• Employee Recognition Program
• Financial Wellness - 403(b) Retirement Plan with matching
• Continuing Education, Training and Advancement opportunities

Work Authorization/Security Clearance

All offers of employment made by Tempus Unlimited are contingent upon satisfactory background check results. Pre-employment background checks will be conducted on all candidates that are offered a position at the agency in compliance with program policy as well as state and federal regulations. From time to time, these checks may be conducted on current employees to ensure compliance with all state and federal regulations and contracts.

EEO Statement

Equal Employment Opportunity is a fundamental principle at Tempus Unlimited, Inc. where employment from recruiting through the end of employment is based upon professional capabilities and qualifications without discrimination because of race, color, religion, sex, age, sexual orientation, veteran status, national origin, disability or any other characteristic as established by law. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.

PIe92e2af10ad8-3631

Principal Duties/Responsibilities:

* Repairs complex electronic and/or mechanical equipment at component level.

* Performs complex new product development.

* Communicates with customers and may travel to customer sites.

* Designs fixtures and performs warranty and root-cause analysis.

* Reviews standard repair processes and develops cycle time improvements.

* Takes the responsibility in setting the standards/methods for testing methodology.

* Processes required service report paperwork.

* Assists less experienced technicians and provides direction and guidance and may provide backup for department.

* Participates in ATS Culture Initiative; continually improves processes; quantitatively monitors processes. Completes required quality core classes and uses skills and techniques presented. Uses the Core Values in work environment. Adheres to company/customer safety procedures.

Knowledge, Skills, Abilities (KSAs), & Competencies:

Essential KSAs:

* Associate's degree (A. A.) or equivalent from two-year college or technical school; and more than ten years related experience and/or training; or twelve years equivalent combination of education and experience.

* Must possess an advanced level of electronic and/or mechanical skills.

* Ability to: read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals; write routine reports and correspondence; speak effectively before groups of customers or employees of organization; calculate figures and amounts such as proportions, percentages, area, circumference, and volume; apply concepts of basic algebra, physics and geometry; apply common sense understanding to carry out instructions furnished in written, oral, or diagram form; deal with problems involving several concrete variables in standardized situations.

Desirable KSAs:

* Team player

* Organized

* Self-motivated and able to prioritize

* must have a good driving record

Competencies:

* Continuous Improvement

* Customer Focus

* Problem Solving

* Customer Focus

* Safety

Physical Demands and Working Conditions:

While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floor

ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more.

Account Executive – Electronic Security & Low-Voltage Integration

Ecosat LLC | San Diego / Chula Vista, CA (Hybrid)

About Ecosat

Ecosat LLC is expanding its Southern California operations. With over 30 years of experience in electronic security and technology integration, we deliver commercial-grade solutions including CCTV, access control, intrusion detection, structured cabling, and low-voltage infrastructure.

We focus on commercial, industrial, enterprise, and government environments — not residential work.

The Role

We are hiring a high-performing Account Executive to drive new commercial business across Southern California.

This is a hunter role focused on:

• Prospecting and developing new B2B relationships

• Conducting site assessments

• Developing technical proposals

• Negotiating and closing projects ($50k–$500k+)

• Maintaining minimum 20% gross margin

• Driving recurring maintenance contracts

Year 1 revenue target: $1.2M+

Ideal Background

• 3–7+ years B2B sales in security systems, low-voltage integration, AV, or similar technical field

• Experience closing commercial projects $50k+

• Comfortable selling to property managers, GCs, facilities teams, or enterprise clients

• Strong understanding of project margin and cost structure

• Self-starter who can build pipeline independently

Why Join Ecosat

• Direct impact on a scaling SoCal operation

• Lean structure — no corporate bureaucracy

• Real upside tied to performance

• Opportunity to grow with the company

Apply directly or message with a summary of your largest commercial security project closed.

Title: Electronic Specialist (Tech)

Location: Carson City, NV 89706

Duration: Direct hire

Pay rate: USD 35.00 /hr - USD 45.00 /hr

Qualifications:

1ST SHIFT POSITION 6 AM TO 3:30 PM

EDUCATION AND WORK EXPERIENCE: The specific EDUCATION and/or EXPERIENCE requirements of this position are:

High School Diploma or GED preferred

Electronics background

Mechanical engineering (knowledge of)

Machinist background (tool and die work)

The specific LICENSES and/or CERTIFICATIONS required for this position are:

Must pass related job test

Electronics school or equivalent

Laser school

Process instrumentation school

The specific SKILLS and KNOWLEDGE required for this position are:

Able to read and write in English

Basic math skills

Computer literate

Logical thinking

Good hand dexterity

Ability to speak and listen effectively to follow instructions in English. Ability to write and speak complete sentences and understand verbal and written instructions in English

Responsibilities:

PRIMARY DUTIES AND RESPONSIBILITIES:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.

The requirements listed below are representative of the knowledge, skill, and/or ability required.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The duties and responsibilities regularly performed for this position are:

Electronic trouble shooting

temperature control, CNC control, P.L.C.

Installation and testing control systems as above

#1. Troubleshoot laser systems.

Order parts to manufactures specifications.

Optical.

Ensures compliance with Company Repair Station Manuel (RSM)/Quality Control Management (QCM).

Must be aware of ISO/Total Customer Satisfaction (TCS) quality requirements.

Ensure that all department employees are properly cross trained.

Adhere to all Company health, safety and environmental policies while performing job duties.

Adhere to and promote Corporate Code of Ethical Standards.

Regular and reliable attendance.

The marginal duties and responsibilities (performed occasionally or at irregular intervals) for this position are:

CNC mechanical repair and setup.

Machine work (mills, lathes, grinders) EDM P/S furnaces.

Control automatic P.L.C logic.

Performing other tasks in the facility as needed.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for an Inspector Electrical & Electronic Sub Assembly to join our Quality team in Everett and Renton, Washington.

As an Inspector for Electrical & Electronic Sub Assembly, you will be an integral part of our commitment to delivering top-notch quality in aerospace manufacturing. This exciting role places you at the intersection of technology and precision, where your keen eye for detail will ensure that every component meets the highest standards of safety and performance. You will engage with advanced inspection techniques and collaborate with a talented team to identify and resolve potential issues before they impact production. Please note that certification for visual acuity and color perception may be required for this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Communicate with shop personnel or check the Call Sheet for the next job or in-process inspection, obtaining applicable drawings and specifications.

• Ensure that the correct revisions of drawings and documents are being used, verifying that all paperwork and online systems are complete and accurate.

• Perform inspections and in-process inspections as required, including crimping, splicing, torque, bond, and ground checks.

• Conduct various tests and measurements, such as resistance tests, to ensure that wires meet specification requirements.

• Monitor manufacturing processes and document findings as required to ensure compliance with quality standards.

• Inspect electrical wire bundles and assemblies, ensuring all parts have been assembled according to drawings and specifications.

• Screen paperwork for options, substitutions, and effectiveness of parts and materials.

• Identify, investigate, and document discrepancies, reporting them to the shop as necessary.

• Reject wire bundles, assemblies, or installations as required, documenting discrepancies and processing Quality Assurance records.

• Indicate Quality Assurance acceptance on appropriate paperwork and online systems, processing documentation as required.

• Coordinate and complete travelers, investigating and clearing check orders as necessary.

• Initiate Inspection Record Change Requests (IRCR) and/or Shipside Action Trackers (SAT) as needed.

• Ensure that certifications for tools, test equipment, and personnel are current and compliant.

• Assist other employees by providing information and answering questions regarding functions, methods, and procedures.

• Perform first article inspections and FAA conformities, coordinating results as required.

• Enter data into various computing software systems, such as Common Manufacturing Execution System (CMES) and Enterprise Process Evaluation Systems (EPES).

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and improve build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Perform audits and surveillance of manufacturing and quality assurance processes to ensure compliance with standards.

• Witness or perform electrical continuity, voltage, resistance, capacitance, and bond or ground testing as required.

• Calibrate and certify electrical process tools, such as loggers, strippers, and crimpers.

• Refer to rejection tags and trouble reports to identify problems and initiate corrective actions.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 2+ years of experience as a Quality Inspector

• 1+ years of experience using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators

• 1+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design)

• Experience working with Microsoft Office (Excel, Word, PowerPoint)

• Proficiency in reading, writing, and speaking English

Preferred Qualifications:

• Electrical experience

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement

Applications for this position will be accepted until Apr. 24, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.