Electronic Components Definition Pdf Jobs in Usa

• Uses Operational Method Sheets, drawings, schematics, electronic assembly equipment and verbal/written instructions to assemble, modify, rework or re-assemble units.
• Works on assignments that are semi routine in nature. The ability to recognize nonconformities is required.
• Communicates openly and effectively in a professional manner.
• Understands and follows all safety requirements.
• Understands and follows ISO practices and procedures.
• Many tasks are repetitive in motion and include the use of electronic assembly equipment.

• Minimum 3 years Assembly experience.
• Previous experience in electro/mechanical assembly and PCB assembly soldering preferred.
• JSD experience preferred.
• Proven ability and experience maintaining flexibility and being able to adapt in a team environment.
• Knowledge and understanding of ESD practices.
• Proficiency in MS Office.
• High school diploma or equivalent.

Position summary:

Install, maintain, and repair electrical systems, apparatus, and electrical equipment, wiring and fixtures, and electronic components of industrial machinery and equipment following electrical code, manuals, schematic diagrams, blueprints, and other specifications, using hand tools, power tools, and electrical and electronic test equipment.

Tasks:

• Install power supply wiring and conduit for newly installed machines and equipment following electrical code and blueprints, using hand tools and voltage tester.
• Install ground leads and connect power cables and wires to machines and equipment, following manuals, schematic diagrams, blueprints, using hand tools and test equipment.
• Diagnoses malfunctioning apparatus, such as transformers, motors, and fixtures using test equipment.
• Repair or replace faulty electric components, wiring, equipment, and fixtures, using hand tools and power tools.
• Test malfunctioning or broken equipment using test equipment, and discuss malfunction with other workers to diagnose malfunction.
• Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
• Place conduit, pipes or tubing, inside designated partitions, walls, structures or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
• Connect wires to circuit breakers, transformers, or other components.
• Install ground leads and connect power cables to equipment, such as motors.

Skills:

• Installation - Installing equipment, machines, wiring, or programs to meet specifications.
• Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
• Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
• Troubleshooting - Determining causes of operating errors and deciding what to do about it.
• Equipment Selection - Determining the kind of tools and equipment needed to do a job.
• Repairing - Repairing machines or systems using the needed tools.

Attributes:

• Follow the rules of safe conduct at all times.
• Demonstrate ability to effectively utilize materials/resources in cost-effective manner.
• Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
• Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
• Oral Comprehension - The ability to listen to and understand information and ideas presented through spoken words and sentences.
• Information Ordering - The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
• Arm-Hand Steadiness - The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
• Manual Dexterity - The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.

Knowledge Requirements:

• Post-Secondary Certificate desirable- awarded for training completed after high school. Minimum 5 years in craft, including helper and apprentice roles. Minimum 2 years as journeyman working in industrial environment
• READING: The employee must have the ability to read safety requirements, instructions in the correct use and maintenance of shop tools, be able to read and understand methods and procedures that are present on drawings, layout work, and just specifications.
• WRITING: Must have the ability to write simple reports with the correct format using spelling and grammar. (English
• SPEAKING: Must have the ability to speak using correct English with a well modulated voice.
• The minimum math ability usually associated with this classification is the ability to calculate surface areas, translate these figures into a bill of material which can be used to complete a specific job. Employees must be able to use variable and formulas which are normally found in most industry approved trade hand books. Also, employees must be familiar with the O.S.H.A. requirements for the type work that is being performed.

The employee must understand that the reporting system used for problems and information is as follows: 1) Crewleader, 2) Foreman, 3) General Foreman, and 4) Superintendent.

Physical Requirements:

• Positions require working in: climbing, bending, sitting, walking, kneeling, crawling, standing, lifting, pushing, and pulling.
• Good hand eye balance and the ability to distinguish colors are required in order to use the tools that are necessary to perform the required work.
• Employees must have vision which has good depth perception in order to judge distance and space relationships.
• The employee must be able to work in all types of weather conditions.
• The ability to work in elevated positions is a must.
• The employee must be able to work in confined spaces as well as wear the following safety equipment when need be: life vests, ear protection, rubber gloves, leather gloves, hard hat, slicker suit, acid suit, rubber gloves, full face breathing mask, wearing full safety harness, or wearing a face shield.
• The heavy work will require the employee to exert up to 100 pounds of force occasionally: The medium work will require the exerting of 50 pounds of frequently: The remainder of the work should require the exertion of 20 pounds of force to constantly move an object.

Other Requirements:

The employee must have a telephone. The employee is expected to work overtime in order to maintain the plant in a safe and productive state. The employee is expected to make call outs when such work is available and the employee’s services are needed.

The employee must have a valid Texas Driver’s License and have permission prior to operating any TIG vehicle. The requirements for operating a company vehicle are as follows: In the past three (3) years the employee can have had only 4 moving violations, no more than 2 chargeable accidents, and no D.W.I.

NOTICE: THIS JOB DESCRIPTION IN NO WAY STATES OR IMPLIES THAT THESE ARE THE ONLY DUTIES TO BE PREFORMED BY THIS EMPLOYEE. HE OR SHE WILL BE REQUIRED TO FOLLOW ANY OTHER INSTRUCTIONS AND TO PERFORM ANY OTHER DUTIES REQUESTED BY HIS OR HER SUPERVISOR.

Job Type: Full-time

Epsilon Systems is seeking a Temporary Electrician II for the Modernization and Engineering division located in Portsmouth, VA. Summary: Performs a variety of complex electrical trade functions such as the installation, maintenance, or repair of electronics and/or electrical equipment for the generation, distribution, or utilization of electric energy onboard U.S. vessels/government installations.

• Reports directly to the Production Manager. Once assigned reports directly to the project Foreman in the performance of his/her responsibilities.
• Performs component and/or system troubleshooting to diagnose the problem and provide most cost-effective recommendation for completing repairs.
• Performs and/or verifies mechanical alignments.
• Ensures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Instructions.
• Performs installation, repair, overhaul or modification in place or in shop to electronic or electro mechanical systems and components (e.g.; controllers, switches, pumps, etc.).
• Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.
• Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, Technical Manuals, MILSPECs, etc.).
• Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).
• Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.
• Strictly adheres to corporate, federal, state and local safety regulations. Ensures that all Epsilon Systems Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.
• Performs installation, repair, overhaul or modification shipboard or in shop to electrical or electro mechanical systems and components.
• Performs component and/or system troubleshooting to diagnose problems.
• Ensures that all requirements and detailed repair procedures and instructions are followed according to the company's work instructions, work packages, management guidance to complete the production operations.
• Works from blueprints, drawings, layouts, or other specifications, inspects and tests electrical systems and equipment to locate and diagnose malfunctions, using visual inspections, testing devices.
• Works standard computations relating to load requirements of wiring or electrical equipment, and uses a variety of electrician's hand tools to measure and test instruments.
• Follows blueprints to determine the location of wiring and equipment and to ensure conformance to shipboard requirements.
• Troubleshoots motor controllers, control panels, and power distribution panels.
• Performs Electrical Testing using multimeter, miggers, ampmeters, load banks.
• Assembles multi-pin connectors and fiber optic connections.
• Installs and seats brushes for AC and DC motors / generators.
• Completes inspection and resurfacing of commutators and slip rings.
• Performs work outside of trade if necessary.

• High school diploma or equivalent or vocational training.
• At least 5 years' experience as a marine electrician.
• Understands and is familiar with NAVSEA Standard items.
• Follows NAVSEA Standard Items.
• Experienced in the performance of Energized Circuit work. Basic knowledge of AC and DC electrical theory, power generation, control and distribution.
• Qualified in a minimum two of the following processes copper multi-pin connector assembly or repair. Fiber Optic connector assembly, repair. and testing/ troubleshooting. Soldering of electrical/Electronic components. Electrical design, diagraming. ESD handling and workmanship experience.
• Possess 32 hours classroom training plus 40 hours on-the-job training in Cat5/6, Coax, Triax and Multi-pin connector fabrication and inspection, qualified to MIL-STD-2003-5B (SH)
• Communicates effectively, work independently or in a group.
• Ability to do basic math, i.e. add, subtract, divide and multiply.
• Ability to read, write, speak, and comprehend English.
• Ability to obtain access to military and government installations worldwide.
• Ability to travel required.

• Requires walking, reaching, sitting and concentration in the presence of occasional and loud noises.
• Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).
• Able to lift, carry and move objects up to 50 lbs in weight.
• Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.
• Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
• Able to perceive and distinguish normal range of colors.
• May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.

Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Pacific International has been exclusively retained by a global leader in the development and production of consumer electronic components, enabling their customers to innovate and expand capabilities.

As they have sustained themselves as a global market leader, they are looking for an Account Director to further expand their reach in the consumer electronics industry. This is a highly visible position with the opportunity to build and deploy strategies for a global organization.

Key Responsibilities

• Lead customer strategy, serving as the primary point of contact and building strong cross‑functional relationships while overseeing commercial and technical initiatives.
• Identify new technology opportunities, expand engagement across business units, and pursue growth with additional OEMs by aligning solutions to customer roadmaps.
• Coordinate with global engineering, operations, and program teams to drive successful development from concept through mass production.
• Lead pricing negotiations, contract and agreement reviews, and annual planning to drive revenue growth while ensuring profitability and long‑term alignment.
• Monitor market trends, emerging technologies, and competitive activity to guide strategy.
• Maintain accurate forecasting, pipeline visibility, and account documentation using CRM and internal tools.

Ideal Candidate Profile

• Bachelor’s degree in engineering, Business, or a related field
• 7-10+ years of sales experience in the consumer electronics or electronic component industry.
• Direct experience managing relationships with consumer electronic OEMs is required.
• Experience managing global customers,
• Proven ability to manage multi-stakeholder accounts within the consumer electronics industry.

About Pacific International Executive Search:

Pacific International, a globally recognized retained executive search firm, is dedicated to empowering Fortune 500, FTSE 100, and high-growth enterprises in building exceptional C-suite, senior-level, and strategic leadership teams while championing diversity and inclusion. Our adaptability, agility, and forward-thinking ethos distinguish us in the ever-evolving business landscape.

Since 1997, we have been dedicated to building lasting client partnerships based on trust and reliability, and a proven track record of successful C-suite and mid- to senior-level leadership project delivery across many key industries globally.

Diversity Statement:

At Pacific International, diversity, equity, and inclusion are at the core of who we are and what we do. Our commitment to these values is unwavering and we proudly champion diversity on behalf of our clients in every Executive Search mandate we undertake. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status, or other characteristics protected by law. In pursuit of these objectives, we actively encourage applications from individuals of all backgrounds and identities.

Electro-Mechanical Assembly Technician

San Diego, CA (Onsite)

Direct Hire

This position pays between $65K - $75 K Per Year

JOB DESCRIPTION

• Physically build deliverable sensor systems: assemble mechanical components, solder electronic components, apply coatings to printed circuit boards, install printed circuit boards into sensor housings, precisely cut and strip wiring, mount fasteners, fasten and/or seal electro-mechanical assemblies by applying various bonding and/or sealing agents
• Perform final machining, cutting, or bonding operations on components such as sensor housing, sense elements, fine wires, etc.
• Assemble wiring harnesses and terminate connectors
• Assemble circuit boards, connectors, ribbon cables, jumpers, and other electronic components into custom-built enclosures
• Test sensors and printed circuit boards using a combination of electrical test equipment and LabVIEW-based software scripts
• Participate actively in inventory management and quarterly inventory checks
• Conduct final assembly of sensor systems onto customer driveshafts, including application of sealant, ensuring integrity of the full assembly, and certifying system fitness for homologation
• Participate in failure analyses by dissecting and analyzing hardware returned from the field, conducting diagnostic and validation testing, and comparing with original results.
• Assist in writing and issuing detailed reports outlining findings

Skill Requirements

• At least 2 years of full-time work experience in a related role
• Attention to detail and good craftsmanship, and a strong concern for quality
• Strong electrical and mechanical assembly skills
• Familiarity with wiring harness assembly protocols using AWG 20-gauge harnesses or smaller
• Familiarity with processing adhesives, soldering, and general machine shop skills
• Proficiency with LabVIEW or equivalent software
• Ability to read and interpret mechanical drawings and electrical schematics
• Understanding and knowledge of sensor or instrumentation calibration protocols
• the candidate is expected to already have a hands-on approach and a certain comfort level building and operating devices and instrumentation.
• Educational Requirements An Associate’s degree in fields such as machining, mechanical technology, electronics, automotive technology, or electronics is preferred but not required.

Applicants should apply via The Mice Groups Inc. website ( ) or through this careers site posting.

We are an equal opportunity employer and value diversity at The Mice Groups Inc. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records.

Pursuant to the Los Angeles Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records.

The Mice Groups Inc. values your privacy. Please consult our Candidate Privacy Notice, for information about how we collect, use, and disclose personal information of our candidates.

Privacy Policy

One of the basic principles The Mice Groups follows in designing and operating this website is that we ask for only the information we need to provide the service you’ve requested.

The Mice Groups does not currently collect personal identifying information via its website except (i) to the extent that you provide this information in an online job application and (ii) to the extent that your web browser provides personal identifying information.

The Mice Groups will use your personally identifying information solely for the purpose for which you submitted the information. The Mice Groups may, however, aggregate certain elements of your personal identifying information with the information of other users of our website to analyze the usefulness and popularity of various web pages on its website.

The Mice Groups reserves the right to change this policy at any time by posting a new privacy policy at this location. Questions regarding this statement should be directed to

• 
  
• Requires a High School Diploma or GED
  
• Soldering experience
  
• Inspection experience
  

• 
  
• Europlacer experience
  
• SMT Experience
  
• SMT Setup experience
  
• Conformal coat experience
  
• Assembly experience
  

Nemak is a leading provider of innovative lightweighting solutions for the global automotive industry, specializing in the development and manufacturing of aluminum components for e-mobility, structure & chassis, and ICE powertrain applications.

We are currently hiring an Electrical Maintenance Technician at the Dickson, TN location.

Possible shifts are as follows:

• 11:00 p.m. - 7:00 a.m.
• 3:00 p.m. - 11:00 p.m.
• 7:00 p.m. - 7:00 a.m.

Maintenance Technician Responsibilities/Daily Duties:

• Strong focus on troubleshooting PLCs, robotics, conveyor systems, pneumatics, and motor drive.
• Adhere to lockout and tag procedures, prioritizing safety at all times
• Perform machinery repairs using a variety of tools
• Clean and lubricate machinery parts as needed
• Perform adjustments, tightening, and repairs during production breaks and work stoppages whenever possible
• Proactively monitor your area for issues and take initiative in preparing for and executing repairs problems
• Provide improvement suggestions to the area supervisor and shift engineers
• Rebuild parts and pre-stage repetitive usage items in the maintenance area
• Maintain small repetitive usage tools and rigging equipment in the maintenance area
• Proactively address pneumatic, hydraulic leaks and safety-related issues
• Communicate emergency and planned work order data promptly to maintenance supervisor or shift lead technician
• Conduct informal shift changeovers and provide relief on machines as needed
• Participate in Total Productive Maintenance (TPM) exercises, closely collaborating and supporting production operations
• Inspect, diagnose, and troubleshoot mechanical issues in hydraulic and pneumatic systems
• Install, assemble, and test machinery and equipment
• Perform routine preventive maintenance checks, inspections, and servicing on all equipment to ensure safe operations and to identify potential malfunctions in machines
• Perform repairs, replacements, and various mechanical, electrical, hydraulic, pneumatic, and welding tasks associated with various maintenance tasks
• Conduct electrical troubleshooting, machine rebuilds, and component overhauls, including dismantling, inspection, repair, or replacement of parts
• Assemble, install, or repair wiring, electrical/electronic components, pipe systems, plumbing, machinery, and equipment
• Utilize forklifts, scissor lifts, and JLG lifts as required
• Possess proficiency in installing, repairing, and maintaining equipment throughout the manufacturing process
• Preform all additional tasks assigned by the supervisor or other member of management

Preferred Knowledge and Abilities:

• Ability to read hydraulic, pneumatic, electrical, electronic schematics, and ladder diagrams
• Ability to troubleshoot and repair hydraulic, pneumatic, and electrical control systems
• Ability to interpret and troubleshoot electrical and motor controls circuits
• Knowledge of electrical machinery control, including the ability to interpret logic and program programmable controllers
• Maintenance experience ranging from two to five years
• Experience in both power distribution and hard-wire control techniques

Requirements/Qualifications:

• High School Diploma or GED
• Two (2) years of industrial maintenance experience and/or a two year technical degree/certification required
• Allen-Bradley PLC programming certification preferred
• Prior experience in an automotive manufacturing environment preferred
• Advanced mechanical knowledge of conveyors, rollers, fabrication and welding
• Advance knowledge and proven experience in PLC programing and troubleshooting
• Proficient in programming using ladder logic and HMI interfaces
• Prior experience in an automotive manufacturing environment preferred
• Successful completion of appropriate skills test, which determines the maintenance technician level
• Availability for short-notice overtime, including weekends

Job Type: Full-time

Pay: $35.63 - $42.76 per hour

At Allegion, we help keep the people you know and love safe and secure where they live, work and visit. With more than 30 brands, 12,000+ employees globally and products sold in 130 countries, we specialize in security around the doorway and beyond. Additionally, in 2024 we were awarded the Gallup Exceptional Workplace Award, which recognizes the most engaged workplace cultures in the world.

The End User Sales Consultant will develop and maintain relationships with end users in education, health care, government and other commercial markets to influence Allegion market share for commercial hardware and electronic security solutions to meet organizational goals.

Qualified candidates must be legally authorized to be employed in the United States. The company does not intend to provide sponsorship for employment visa status (e.g., H-1B, TN, etc.) for this employment position.

• Identify, develop and cultivate relationships with key influencers at targeted end user facilities to achieve annual goals, maintaining relationships with current end users.
• Manage the sales process through effective team communication and collaboration, utilizing our Customer Relationship Management (CRM).
• Implement a consultative approach to customer relationships in order position appropriate Allegion portfolio through consultative selling and listening. Successful end user consultants have a skill in listening to understand in order to provide the best solutions for customers.
• Engage in pipeline management, demonstrating ability to best prioritize accounts. Successful end user consultants possess a hunter mentality, continuously identifying new ways to create demand for our solutions.
• Maintain a strategic understanding of market conditions and be able to adapt to maintain a competitive advantage.
• Engage in (factory) training sessions to achieve industry-leading knowledge in both mechanical and electronic security solutions.
• Maintain excellent industry and territory knowledge by reviewing and understanding market data of competitive activity. Adapt to change in marketplace.
• Adept in using social networking to stay engaged in and up-to-date on industry activity.
• Maintain and utilize our CRM tool for sales reporting and to communicate sales activities.
• Drive adoption of our customer facing tools for collaboration and integration into their business.
• Ensure proper customers and partners are adequately trained on new and existing products, including Allegion digital tools.
• Maintain awareness of all Allegion policies, guidelines, and procedures and ensure compliance; embody Allegion's values daily.
• Understanding of the construction process a plus.
• Knowledge of Doors, Frames, and Hardware a plus.
• Territory will be middle and South Georgia.

• 5+ years sales experience, door and hardware industry experience preferred
• Openness to development and continuing education
• Degree in Sales, Business or Marketing is a plus
• Self-starter mentality, ability to operate autonomously to meet goals
• Aptitude to develop knowledge of mechanical and electronic solutions, including options spanning from mechanical access/egress control to total facility integration
• Ability to reach intermediate level understanding of electricity and electronic components
• Excellent verbal and written communication skills; strong presentation skills
• Demonstrated experience influencing others with a bias for action; customer focus
• Ability to travel up to 40%

Allegion is a Great Place to Grow your Career if:

• You're seeking a rewarding opportunity that allows you to truly help others. With thousands of employees and customers around the world, there's plenty of room to make an impact. As our values state, \"this is your business, run with it\".
• You're looking for a company that will invest in your professional development. As we grow, we want you to grow with us.
• You want a culture that promotes work-life balance. Our employees enjoy generous paid time off, because at Allegion we recognize that you have a full life outside of work!
• You want to work for an award-winning company that invests in its people. Allegion is proud to be a recipient of the Gallup Exceptional Workplace Award for the second year in a row, recognizing our commitment to employee engagement, strengths-based development, and unlocking human potential.

• Health, dental and vision insurance coverage, helping you \"be safe, be healthy\".
• A commitment to your future with a 401K plan, offering a 6% company match and no vesting period
• Tuition Reimbursement
• Unlimited PTO
• Employee Discounts through Perks at Work
• Community involvement and opportunities to give back so you can \"serve others, not yourself\"
• Opportunities to leverage your unique strengths through CliftonStrengths testing and coaching

Apply Today! Join our team of experts today and help us make tomorrow's world a safer place!

Not sure if your experience perfectly aligns with the role? Studies have shown that some people are less likely to apply to jobs unless they meet every single qualification and every single preferred qualification of a job posting. At Allegion, we are dedicated to building a diverse, inclusive, and authentic workplace. So, if you're excited about this role but your past experience doesn't align perfectly with every item in the job description, we encourage you to apply anyway. You may be just the right candidate for this role.

Remote Location Georgia

Allegion is committed to building and maintaining a diverse and inclusive workplace. Together, we embrace all differences and similarities among colleagues, as well as the differences and similarities within the relationships that we foster with customers, suppliers and the communities where we live and work. Whatever your background, experience, race, color, national origin, religion, age, gender, gender identity, disability status, sexual orientation, protected veteran status, or any other characteristic protected by law, we will make sure that you have every opportunity to impress us in your application and the opportunity to give your best at work, not because we're required to, but because it's the right thing to do. We are also committed to providing accommodations for persons with disabilities. If for any reason you cannot apply through our career site and require an accommodation or assistance, please contact our Talent Acquisition Team.

Allegion plc, 2023 | Block D, Iveagh Court, Harcourt Road, Dublin 2, Co. Dublin, Ireland

REGISTERED IN IRELAND WITH LIMITED LIABILITY REGISTERED NUMBER 527370

Allegion is an equal opportunity and affirmative action employer

Privacy Policy

Job Summary

The Maintenance Technician I–III is responsible for performing preventive and predictive maintenance and repairing production equipment as needed. This role also supports senior technicians with electrical and mechanical projects while ensuring safe and efficient equipment operation in a manufacturing environment.

Key Responsibilities

• Perform preventive and predictive maintenance on production equipment.
• Assist senior technicians with equipment repairs while learning best practices.
• Support small electrical and mechanical projects under the direction of the Team Lead or Supervisor.
• Follow all safety policies, procedures, and regulatory requirements.
• Ensure compliance with occupational health and safety standards and recommend improvements when needed.
• Work collaboratively with production teams to support operational efficiency.
• Repair and replace electrical, hydraulic, pneumatic, and electronic components including motors, contactors, relays, timers, switches, PLCs, light curtains, motor controls, and valves.
• Diagnose and troubleshoot faults in electrical equipment and integrated systems.
• Install and repair electrical wiring, conduits, receptacles, switch boxes, cable assemblies, and lighting fixtures.
• Maintain equipment performance and assist with managing spare parts inventory.
• Support equipment installation, setup, modification, and relocation.
• Read and interpret electrical schematics, wiring diagrams, and hydraulic/pneumatic diagrams.
• Test electrical and electronic components for voltage, current, resistance, and continuity.
• Respond to equipment breakdowns and resolve issues to prevent production downtime.
• Follow Lockout/Tagout (LOTO) procedures when servicing equipment.
• Accurately complete work orders and maintenance documentation.

Qualifications

Skills

• Experience troubleshooting electrical and mechanical equipment.
• Knowledge of PLC systems, robotics, AC/DC and servo drives, motion control, HMI interfaces, and motor controls.
• Ability to read electrical, mechanical, pneumatic, and hydraulic schematics.
• Understanding of PLC programming concepts (e.g., Siemens Step 7, Beckhoff TwinCat).
• Knowledge of electrical circuitry including relays, contactors, limit switches, and proximity sensors.
• Familiarity with Computerized Maintenance Management Systems (CMMS) is a plus.

Traits

• Strong teamwork and collaboration skills.
• Mechanical aptitude and interest in technical problem-solving.
• Excellent communication and interpersonal skills.
• Detail-oriented with strong follow-through.
• Willingness to work rotating shifts.
• Ability to support and manage small technical projects.

Education & Experience

• Minimum 2 years of relevant experience with strong troubleshooting skills.

Preferred:

• Experience in a fast-paced manufacturing or industrial environment.
• Technical trade school certificate or related military training.