Electro Mechanical Engineering Jobs in Usa

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.

L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

Job Title: Scientist, Integration and Test Engineering (CITE)

Job Code: 33805

Job Location: Palm Bay, FL

Job Schedule: 9/80 (Every other Friday off)

Job Description:

The Chief Integration & Test Engineer (CITE) will oversee system verification and test planning for the integration of the spacecraft bus, mission payload, and communication payload, culminating in end-to-end testing. Responsibilities include leading a team of I&T engineers through the product life cycle, from initial requirement analysis for testability to designing and developing test plans and flows. Additionally, this role involves defining, planning, and implementing strategies for test, verification, validation, qualification, and acceptance testing.

Essential Functions:

• Provide mastery-level system integration and test engineering expertise to a team.
• Lead space hardware and software integration and verification testing at acceptance, proto-flight, and qualification levels for all relevant environments (vibration, thermal, vacuum)
• Develop verification plans, test procedures, and test flows, and lead the execution of test procedures.
• Document test results in reports to ensure system requirements are met.
• Lead requirements verification for components, subsystems, and systems.
• managing the Test Bed and Simulators used during integration and test activities.
• Identify and resolve technical issues and anomalies during integration and testing, collaborating with cross-functional teams to address discrepancies.
• Collaborate with cross-discipline teams (systems, mechanical, structural, thermal, power, optical, RF, electrical) in development, integration, and execution.
• Represent Space Integration & Test engineering during major system level design reviews including System Requirements Review (SRR), Preliminary Design Reviews (PDR), Critical Design Reviews (CDR), and Test Readiness Reviews (TRR), and Pre-Shipment Review (PSR)

Qualifications:

• Bachelor's Degree and a minimum of 12 years of engineering experience. Graduate Degree and a minimum of 10 years of engineering experience. In lieu of a degree, a minimum of 16 years of engineering experience
• Experience with system-level space requirements verification, including allocation, testability, flow down, analysis, testing, and demonstration.
• Experience executing all phases of space vehicle programs (SRR, PDR, CDR, IRR, TRR, PSR, etc.)
• Experience with space hardware/software integration, testing, and troubleshooting
• Experience with Flat Sats and simulators
• Secret Clearance

Preferred Additional Skills:

• Technical leadership experience in an SI&T role
• Experience designing Mechanical Ground Support Equipment (MGSE) and/or Electrical Ground Support Equipment (EGSE) for large space vehicles.
• Strong understanding in space vehicle subsystem designs: Power, Thermal, Communications (Optical or RF), Data Management, Structures, Mechanisms, GNC, Propulsion, Configuration/Packaging, Software, Fault Management, Harness
• Proficiency with Interface Definition Documents (IDDs) and Interface Control Drawings (ICDs)
• Expertise in requirements management, traceability, and verification using IBM Rational DOORS and MBSE tools (CAMEO)
• Experience directly interfacing with customers (both prime contractors and end customers) to resolve technical issues during the development and sell-off of space hardware.
• Experience in risk management

L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

• 
  
• To oversee the design for Liquids Pump station facilities for expansion and maintenance capital projects executed by third party engineering firms to ensure compliance with Company standards and specifications and industry standards and managed to the project budget and schedule.
  
• Liaison with other company functional groups within Project Execution, Operations, and Shared Services to ensure project and company requirements are achieved and incorporated into the design deliverables.
  

• 
  
• Ensures that all pump station facilities are designed in accordance with all regulations, applicable industry codes, and corporate standards.
  
• Defines the scope, schedule, and budget for the design and materials for pump station facility projects.
  
• Manages the execution of the design deliverables by a third-party engineering firm against the project budget and schedule.
  
• Reviews and approves design deliverables, for example, drawings, technical reports, and material listing sheets.
  
• Participates in design review meetings with the engineering firm, the Project Manager, Operations, and Construction personnel to discuss the scope, design, and expected performance, as well as work out constructability issues.
  
• Reviews vendor materials quotations, prepares technical evaluations, and recommends selections based on technical merit, along with price and delivery. For example: pump and motor equipment, vessels, buildings, generators, pipe, valves, and fittings.
  
• Reviews lessons learned from past projects and incorporates recommendations into future designs.
  
• Actively identifies and communicates new lessons learned and quality incidents for assigned projects.
  
• Support department initiatives as required.
  

• 
  
• Project Manager - Weekly interaction to provide updated status on progress, cost, schedule, and risk.
  
• Supervisor, Facilities Project Engineering - Daily interaction to address project issues and problems.
  
• Manager, Facilities Project Engineering - Weekly interaction to provide project status update.
  
• External Engineering Firm - Daily interaction to provide oversight on project design activities.
  
• Operations - Weekly interaction to provide project status update and seek guidance on required design features.
  

• 
  
• Bachelor's degree in Mechanical, Civil, or other related Engineering field.
  
• Minimum of 4 years of industry experience.
  

• 
  
• Capable of working independently, managing multiple projects, and prioritizing tasks accordingly
  
• Problem-solve issues through the use of standards, modification of standards, and/or previous experience
  
• Effectively communicate technical issues and impacts to other technical and non-technical staff
  

• 
  
• 80% of work is office-based based working with multiple project teams
  
• 20% of the time is in the field scoping projects or supporting procurement, construction, and commissioning activities
  
• Time-sensitive deliverables
  
• Work requires strong computer skills, typically using Microsoft Office applications
  

Job description:

Telescent Inc. is a rapidly expanding high-technology company specializing in innovative network management systems. Based in Irvine California, our cutting-edge solutions leverage artificial intelligence and robotic systems to optimize data center operations worldwide, helping clients reduce costs and enhance efficiency through our patented technologies.

Position

We are seeking a dynamic Manufacturing Engineer to join our team and drive excellence in our manufacturing processes. In this role, you will be instrumental in designing, developing, and improving manufacturing systems for our advanced products. Your expertise will ensure seamless production workflows, enhance quality standards, and support continuous improvement initiatives across our manufacturing facility.

Responsibilities

• Develop and implement manufacturing processes for complex electronic and mechanical components, including plastics injection molding, CNC machining, and assembly line operations
• Utilize CAD software such as AutoCAD, SolidWorks, and Creo to design tooling, fixtures, and process layouts
• Program and troubleshoot programmable logic controllers (PLCs), robotics, CNC machines, and vision inspection systems to optimize automation
• Conduct root cause analysis on production issues to identify defects or inefficiencies and implement corrective actions
• Collaborate with process engineering teams to refine manufacturing workflows aligned with ISO 9001 standards and lean manufacturing principles
• Create detailed schematics, technical drawings, and process documentation for manufacturing equipment and industrial systems
• Support factory experience initiatives by applying mechanical knowledge to improve fabrication, tooling, welding, and assembly processes

Skills

• Strong project scheduling skills to manage multiple process improvement initiatives simultaneously
• Expertise in industrial engineering concepts including process engineering and factory layout design
• Proficiency in CAD tools such as AutoCAD, SolidWorks, Creo, and CAM programming for manufacturing applications
• Hands-on experience with robotics programming, vision inspection systems, CNC programming, and industrial equipment maintenance
• Knowledge of plastics injection molding techniques and tooling design for high-precision components
• Ability to perform root cause analysis using structured problem-solving methods
• Familiarity with schematics, GD&T (Geometric Dimensioning & Tolerancing), and industrial schematics for equipment troubleshooting
• Mechanical knowledge related to fabrication, welding, tooling development, and assembly line optimization
• Experience working within a manufacturing facility environment with a focus on continuous improvement practices
• Join us to be part of a forward-thinking team that values innovation, precision engineering, and operational excellence. Your contributions will directly impact the efficiency of our manufacturing processes while supporting the development of groundbreaking technologies used globally.

Benefits:

• 401(k)
• Dental insurance
• Health insurance
• Paid time off
• Vision insurance

Work Location: In person

At Rite-Hite, your work makes an impact. As the global leader in loading dock and door equipment, we design and deliver solutions that keep our customers safe, secure, and productive. Here, you'll find innovation, stability, and the chance to grow your career as part of a team that's always looking ahead.

PURPOSE AND SCOPE

This positionis responsibleforleading and managing the engineering team responsible for developing, improving, andoptimizingmanufacturing processes to achieve operational excellence.

ESSENTIAL DUTIES AND RESPONSIBILITIES

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.

• Create, test, document and approveECN's(engineering change notice)as needed to effectively address warranty issues, manufacturing requests and/orpurchasingrequests.

• Serve asa technicalliaison between Horn Lake manufacturing team and Milwaukee based product engineering teams with respect to new product development to ensure manufacturabilityof products. Specific responsibilities will include assisting with BOM's(bill of materials)as needed,developlabortimes, standardoperatingproceduresand written work instructions.

• Interface askey technical contact with RHPC engineering in Milwaukee.

• Meet established welding and assembly design criteria by ensuring compliance with work procedures and instructions.

• Analyzes andplansspace requirements, workflow and designs layout of equipment and workspace for maximum efficiency.

• Ensure that all required tooling is in place andmeetsengineering designcriteria.

• Responsible for the facility management of the Horn Lake facility on aday-to-daybasis.This includes theloadingdock equipment,forklifts, production equipment,machines,and operation of the mechanical equipment from plumbing to electrical.This position alsois responsible for theday-to-dayquality audits and feedback to the production team on a daily/weekly basis.

• Ensure compliance withthe engineeringbudget that is in place on an annual basis.

• Review/ order engineered product to ensure product structures and BOM's are correct.Work with Applications and Engineering to build labor and quality standards asrequired. He/she willassistandrecommend inthe automation of equipment and processes toassistin the ergonomic and productivity of manufacturing RHPC products.

• In conjunction with manufacturing andpurchasing, complete Value Analysis projects to reduce current costs through redesign and/or use of alternate components.

PRINCIPAL ACCOUNTABILITIES

• Drive continuous improvement initiatives such as Lean Manufacturing, Six Sigma, and 5S to enhance efficiency, reducewasteand improve product quality.

• Manage capital projects, including equipmentselection, layout planning, and justification for investment.

• Analyze production metrics and root cause issues to improve, reduce downtime, and enhance process liability.

EDUCATION and/or EXPERIENCE

• Bachelor's degree (B. S.) in Mechanical,Industrial, or ManufacturingEngineeringor related fieldas well as five+years related experience including supervisory responsibility (or project management responsibilities) or equivalent combination of education and experience.

• Must have working knowledge of Solid works and AutoCAD(or equivalent software).Thorough knowledge of BOM structures and itemmastersasrequiredfor manufacturing and engineering support.

• In addition, knowledge of JD Edwardsrequiredas needed for engineering purposes.

KNOWLEDGE / SKILL REQUIREMENTS:

Professional certifications such as Lean Six Sigma Black Belt or PMP.

PHYSICAL DEMANDS
While performing the duties of this job, the employeeis regularly required tostand;use hands to finger,handleorfeel;talk or hear. The employeefrequentlyis required towalk and reach with hands and arms. The employeeis occasionally required tostoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

WORK ENVIRONMENT
While performing the duties of this job, the employee is regularly exposed to fumes or airborne particles. The employee is occasionally exposed to toxic orcaustic chemicals and outside weather conditions. The noise level in the work environment is usually loud.Personal Protective Equipment (PPE) isrequired.

What We Offer

At Rite-Hite, we take care of our people - because when you're supported, you can do your best work. Our benefits are designed to support your health, your future and your life outside of work:

• Health & Well-being: Comprehensive medical, dental, and vision coverage, plus life and disability insurance. A robust well-being program with an opportunity to receive an extra day off and more.

• Financial Security: A strong retirement savings program with 401(k), company match, and profit sharing.

• Time for You: Paid holidays, vacation time, and personal/sick days each year.

Join us and build a career where you're supported - at work and beyond.

Rite-Hite is proud to be an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic under federal, state, or local law.In accordance with VEVRAA, we are committed to providing equal employment opportunities for protected veterans.We are also committed to maintaining a drug-free workplace for the safety of our employees and customers.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes (BCA) is looking for an Airplane Systems Design Engineering Senior Manager (Level L) to join the 787 Systems Organization in North Charleston, SC.

The 787 Systems organization is responsible for a multitude of mechanical, electrical, electronic, pneumatic, and hydraulic systems that range from simple to highly complex and highly integrated.

As the Design Engineering Senior Manager, you will develop and support these systems and their components in a sustaining production environment. Project examples include addressing design obsolescence, developing product improvements, optimizing design for production, and optimizing designs for reliability. To accomplish this, the Design Engineering manager works both internally and externally with a global network of partners and suppliers.

Position Responsibilities:

• Manages employees and managers performing engineering and technical activities in the areas of Electronic and Electrical Engineering

• Develops and executes project and process plans, implements policies and procedures and sets operational goals

• Acquires resources for projects and processes, provides technical management of suppliers and leads process improvements

• Develops and maintains relationships and partnerships with customers, stakeholders, peers, partners and direct reports

• Provides oversight and approval of technical approaches, products and processes

• Manages, develops and motivates employees

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry

• 5+ years of experience in the Aerospace industry

• 2+ years of experience leading cross-functional teams

• 2+ years of experience leading and/or managing complex projects

• 2+ years of experience or familiarity with aircraft design and airplane systems

Preferred Qualifications (Desired Skills/Experience):

• 5+ years of experience leading teams in a formal and/or informal leadership role

• 5+ years of experience working with aircraft systems

• Experience supporting commercial aircraft production systems

• Experience managing external supplier partnerships

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary Pay Range: $170,000 - $230,000

Applications for this position will be accepted until Apr. 16, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Sr. Manufacturing Engineer (Mechanical) at Reliable Robotics, you'll play a critical role in developing and continuously improving all aspects of our manufacturing, installation, and supply chain processes to meet design, regulatory, and business requirements (including safety, quality, cost, and on-time delivery). This is a growing team of highly motivated people passionate about delivering quality products and services on time, with unquestionable value. You will be responsible for designing the build and installation process for mechanical, electromechanical, and/or electrical/avionics products, conducting design for excellence (DFx) reviews, and developing the processes and infrastructure to help the business scale. The projects you work on will set the foundation for how the business operates for years to come. This is a fantastic opportunity to work in a safety-critical environment that takes automated aviation systems from prototype to production in a hands-on environment.

Responsibilities

• Responsible for building, installing, testing, diagnosing, inspecting, and maintaining Reliable-designed mechanical, electromechanical, and/or electrical/avionics assemblies, harnesses, interconnects, and other commercial-off-the-shelf (COTS) products

• Conduct design for excellence (DFx) reviews to evaluate designs for cost, producibility, inspectability, consistency, adequacy, accuracy, and conformance to requirements

• Collaborate with design, quality, and certification teams to embed manufacturability, compliance, and risk mitigation in all phases of product development (e.g., prototype, R&D, certification, and production)

• Develop and ensure compliance with all policies, procedures, quality management system, and engineering change orders

• Develop processes to ensure accurate, current, and complete documentation (work instructions, inspections, tests, records, etc.) is utilized and maintained

• Lead root-cause analysis and implement timely corrective actions to maintain schedule, quality, and reliability

Basic Success Criteria

• Bachelor's degree in mechanical, electrical, aerospace, or systems engineering

• 7+ years of manufacturing, design, and/or testing experience

• 2+ years of experience with computer-aided design (CAD) and Product Lifecycle Management (PLM) software, such as Altium, NX, and Teamcenter

Preferred Criteria

• Research and Development (R&D) or New Product Introduction (NPI) experience

• Experience with industry or regulatory requirements such as AS9100, CFR 14 CFR 21.137, and/or 14 CFR Part 145

• Previous leadership or management experience

• Prior experience in troubleshooting, repairing, setting up, and operating complex hardware in a safety-critical environment

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The position will be located at our facility in Mountain View, California.

Must be willing to travel 10% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $167K - $230K

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Supplier Development Engineer at Reliable Robotics, you'll play a critical role in developing and continuously improving all aspects of our mechanical supplier engineering processes to meet design, regulatory, and business requirements (including safety, quality, cost, and on-time delivery). This is a growing team of highly motivated people passionate about delivering quality products and services on time, with unquestionable value. You will be responsible for sourcing, qualifying, and troubleshooting all machining and sheet metal products, conducting design for excellence (DFx) reviews, and developing the processes and infrastructure to help the business scale. The projects you work on will set the foundation for how the business operates for years to come. This is a fantastic opportunity to work in a safety-critical environment that takes automated aviation systems from prototype to production in a hands-on environment.

Responsibilities

• Develop and manage supplier relationships to ensure they meet or exceed manufacturing, testing, inspection, quality, performance, and reliability requirements

• Develop design for excellence (DFx) processes, and conduct reviews to evaluate designs for cost, producibility, inspectability, consistency, adequacy, accuracy, and conformance to requirements

• Develop supplier qualification processes and conduct regular reviews

• Collaborate with design, quality, and certification teams to embed producibility/manufacturability, compliance, and risk mitigation in all phases of product development (e.g., prototype, R&D, certification, and production)

• Develop quality control plans and inspection infrastructure, including dimensional inspection and functional testing

• Develop and ensure compliance with all policies, procedures, quality management systems, and engineering change orders

• Develop processes to ensure accurate, current, and complete documentation (work instructions, inspections, tests, records, etc.) is utilized and maintained

• Lead root-cause analysis and implement timely corrective actions to maintain schedule, quality, and reliability

Basic Success Criteria

• Bachelor's degree in mechanical, aerospace engineering, or a related field of study

• 5+ years of manufacturing, design, and/or testing experience

• 2+ years of experience with computer-aided design (CAD) and Product Lifecycle Management (PLM) software, such as NX and Teamcenter

• Geometric Dimensioning and Tolerancing (GD&T) experience

• Coordinate Measuring Machine (CMM) experience

Preferred Success Criteria

• Experience with CNC machinery (lathe, mill, waterjet, laser cutter, EDM)

• Precision sheet-metal or plastic molding tooling design experience

• Experience with industry or regulatory requirements such as AS9100, CFR 14 CFR 21.137, and/or 14 CFR Part 145

• Research and Development (R&D) or New Product Introduction (NPI) experience

• Previous leadership or management experience

• Prior experience in troubleshooting, repairing, setting up, and operating complex hardware in a safety-critical environment

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

This role will be located at our facility in Mountain View, California.

Must be willing to travel 25% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $132K - $200K

Build a Career That Matters with One of the World's Most Respected Employers!

- - - - - - - - - - - -

Michelin Louisville is seeking Engineering Co-Op students majoring in Chemical, Mechanical, Industrial, Computer, and Electrical Engineering to join the team at our plant in Louisville, KY.

In our petrochemical facility we produce synthetic rubber from monomer feedstocks and catalysts, through a polymerization reaction.

The product, after other operations, is carefully weighed and pressed into uniform bales before shipping to the next Michelin factory for tire production.

Our facility supplies various rubber products that go into tires in the USA, Canada, and in Michelin factories around the world. Our site is one of the three Michelin petrochemical sites producing synthetic rubber for cars, vans, trucks, two-wheelers, aircraft, agricultural tractors, and mining equipment.

WHAT WILL YOU DO

• Work on a project team to analyze data to improve performance and/or production
• Ensure products meet the defined quality and performance standards
• Assist with productivity, cost-reduction, and continuous-improvement projects
• Study processes and propose improvements

WHAT WILL YOU BRING

The ability to interact in a professional manner with external partners, suppliers, customers, and colleagues. Success in working with other people or team to meet a common objective. Proficient in the use of Microsoft Office Suite (Word, Excel, PowerPoint) and ability to learn other software systems. Minimum cumulative GPA of 3.0 Currently enrolled in a Mechanical, Chemical, Industrial, Computer, or Electrical Engineering or equivalent program at an accredited four-year college or university.

Ready to Shape the Future of Innovation?

Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.

The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.

Why Michelin?

• Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.
• Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Business Resource Groups and Inclusion Councils.
• Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.
• Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.

Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .

This position is not available for immigration sponsorship.

We build the future with people like you. Begin your career with Michelin today!

What Makes a Honda, is Who makes a Honda
Honda has a clear vision for the future, and it’s a joyful one.  We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success.  We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”

We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.

If your goals and values align with Honda’s, we want you to join our team to Bring the Future!

Reliability Development Engineers are responsible for validating the body and/or chassis strength, durability, and marketability to meet Honda’s internal requirements and model specific targets with a goal of meeting or exceeding Honda and Acura customer expectations. You will be in charge of delivering full vehicle computational and testing results for body and/or chassis systems with available guidance as you continue to expand your technical knowledge and deepen your expertise in automotive development.

• Produce and analyze engineering data using pre-set tools, methods, and formats. Involves working independently. 
• Responsible for planning, preparing, and coordinating various aspects of exterior performance tests including arrangement of facilities, requesting technician support, and acquiring testing materials.
• Physically support tests including confirmation that test setups are correct and that test plans are understood and executed to intent.
• Prepare moderately complex documentation for review by technical leadership to record and submit all necessary development / testing / research information per the determined schedule.
• Help coordinate and execute root cause analysis, countermeasure activites, and improvement intiatives to technical leadership

• Bachelor of Science Degree in Mechanical, Aerospace Engineering, or equivalent experience 
• 0-6 years engineering experience based on education
• Proficient in Microsoft Excel, Word, and Powerpoint
• Experience in data analysis and communication of complex information to engineering management is desired.
• Experience with following software or similar is desired
• 3D CAD surface modeling CATiA or SolidWorks
• Data acquisition software
• FEA Software Abaqus, Nastran, Hypermesh, Ansa, Meta, LS-DYNA
• Scripting in Java, Python, MATLAB
• Ability to communicate concerns and ideas through remote work environmen

What differentiates Honda and make us an employer of choice?

Total Rewards:

• Competitive Base Wages (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)
• Paid Overtime
• Regional Bonus (when applicable)
• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) 
• Paid time off, including vacation, holidays, shutdown
• Company Paid Short-Term and Long-Term Disability 
• 401K Plan with company match + additional contribution

Career Growth:

• Advancement Opportunities
• Career Mobility
• Education Reimbursement for Continued Learning
• Training and Development Programs 

Additional Offerings:

• Lifestyle Account
• Childcare Reimbursement Account
• Tuition Assistance & Student Loan Repayment
• Elder Care Support
• Wellbeing Program
• Community Service and Engagement Programs
• Product Programs

Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Under general and/or immediate supervision from higher level engineering staff, performs a variety of journey level technical drafting, office and field engineering work; and provides assistance and information to the public. May exercise functional and technical supervision over less experienced technical staff.
Position Snapshot/A Day in the Life: The Engineering Technician II performs routine drafting and technical engineering work in support of municipal infrastructure projects. Responsibilities include assisting with engineering design and planning, providing customer service, and performing technical office and field duties related to updating, maintaining, and analyzing the Public Works and Engineering Department's Geographic Information System (GIS) and utility infrastructure data. This position coordinates and conducts research, field data collection, and condition assessments of infrastructure assets, using GIS, database, and information management tools to support capital planning and ensure compliance with regulatory requirements.

Essential Functions

Engineering Technician II -This is the full journey level in the Engineering Technician series. Employees within this class are distinguished from the Engineering Technician I By the performance of the full range of duties as assigned including the moderately complex duties of drafting, office and field engineering work. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise, and are fully aware of the operating procedures and policies of the work unit. This class is flexibly staffed and is normally filled by advancement from the I level, or when filled from the outside, requires previous work experience.

ESSENTIAL FUNCTIONS:Incumbent must have the ability to:

• Review and process tract maps, parcel maps, of line adjustments, grants of easement, and street right-of-ways for recordation.
• Verify fulfillment of conditions of approval for new subdivisions; perform on-site inspections to verify survey monuments related to parcel maps and lot line adjustments.
• Prepare and draft technical engineering plans for construction of streets, alleys, storm drains, water lines, and other public improvements.
• Provide public assistance at counter and over the telephone.
• Prepare quantity and cost estimates for engineering projects.
• Maintain a variety of maps and records including tract maps, parcel maps, lot line adjustments, easements, street and address changes.
• Review engineering plans to determine appropriate layout of construction projects.
• Perform on-site inspections to obtain information; determine angles and set grade stakes, hubs, turning points and benchmarks using appropriate surveying techniques; locate and measure boundary lines, right-of-ways, and land grades.
• Make and check mathematical calculations related to surveying, drafting and basic engineering.
• Maintain accurate survey records in the form of field notes and sketches.
• Participate in a variety of engineering design and planning work related to municipal engineering projects.
• Answer questions and provide information to the public concerning engineering activities.
• Assist in development and maintenance of the record keeping and filing systems.
• Prepare, assemble and distribute copies of maps, charts and blueprints.
• Answer questions and provide information to the public concerning engineering activities.
• Perform any other tasks or functions deemed necessary to the daily operations of the employer.

EXPERIENCE AND TRAINING GUIDELINES: A combination of experience and training that would likely provide the required knowledge and abilities is qualifying. The employee must have knowledge of:

Engineering Technician II: In addition the qualifications of Engineering Technician I, knowledge of:

• Terminology, methods, practices and techniques of drafting.
• Trigonometry as applied to the computation of angles, areas, distances and traverses.
• Elementary surveying techniques and practices.
• Engineering maps and records.

• Perform moderately complex engineering and mathematic calculations with speed and accuracy.
• Understand and follow written instructions and sketches.
• Use and care for drafting, surveying, and mechanical instruments and tools.
• Work independently in the absence of supervision.

The City of Fontana has a flexible benefits plan. This plan allows for employees to select benefits based upon their individual needs. Full-time and Classified Part-time employees are eligible for benefits.

Please to view our excellent employee benefit options.

• 
  
  
• High School graduate or equivalent
  
  
• Some college
  
  
• Trade school graduate or Apprenticeship
  
  
• Associate's degree in related field
  
  
• Bachelor's degree in related field
  
  
• Bachelor's degree or higher in non-related field
  
  
• Equivalent to Bachelor's degree in related field
  
  
• Master's degree or higher in related field
  
  
• None of the above
  
  

• 
  
  
• No experience
  
  
• Less than one (1) year.
  
  
• One (1) year or more year(s) but less than two (2) years.
  
  
• Two (2) or more years but less than four (4) years.
  
  
• Four (4) or more years but less than six (6) years.
  
  
• Six (6) years or more but, less than eight (8) years.
  
  

Required Question

Job SummaryThe SMT Engineering Technician Night Shift will support the manufacturing process by maintaining Surface Mount Technology (SMT) equipment, troubleshooting production issues, and ensuring optimal machine performance during night operations to meet production targets.Job Responsibilities

• Perform preventative maintenance and calibration on SMT equipment (e.g., screen printers, pick-and-place machines, reflow ovens, AOI) according to established schedules and procedures.
• Diagnose and repair complex SMT equipment malfunctions, including mechanical, electrical, and software issues, in a timely manner to minimize downtime.
• Assist engineers in process optimization, equipment setup, and the development of new manufacturing processes and procedures.
• Monitor SMT line performance, identify potential issues, and implement corrective actions to improve efficiency, quality, and yield.
• Provide technical support to production operators, offering guidance and training on SMT equipment operation and basic troubleshooting.
• Document all maintenance activities, repairs, and process changes accurately and thoroughly.
• Participate in root cause analysis for production defects and implement effective solutions.
• Adhere to all safety regulations and company policies, maintaining a clean and organized work environment.
• Collaborate effectively with cross-functional teams, including production, quality, and engineering, to resolve issues and achieve production goals.
• Flexibility to work night shifts, including weekends and holidays as required.

Job Qualifications

• Associate's degree in Electronics, Mechatronics, or a related technical field, or equivalent practical experience.
• Minimum of 3-5 years of experience as an SMT Technician or similar role in a high-volume manufacturing environment.
• Strong understanding of SMT processes, equipment operation, and common defects.
• Proficiency in troubleshooting and repairing complex SMT machinery, including electrical, mechanical, and pneumatic systems.
• Ability to read and interpret schematics, technical drawings, and equipment manuals.
• Experience with various SMT equipment manufacturers (e.g., Fuji, Panasonic, Mycronic, Juki, DEK, MPM, BTU, Koh Young, Mirtec) is highly desirable.
• Familiarity with IPC standards and quality control principles.
• Excellent problem-solving skills and attention to detail.
• Strong communication and interpersonal skills, with the ability to work independently and as part of a team.
• Proficient in using standard hand tools, diagnostic equipment, and computers.
• Ability to lift up to 35 lbs and stand for extended periods.

Job Summary

• Perform preventative maintenance and calibration on SMT equipment (e.g., screen printers, pick-and-place machines, reflow ovens, AOI) according to established schedules and procedures.
• Diagnose and repair complex SMT equipment malfunctions, including mechanical, electrical, and software issues, in a timely manner to minimize downtime.
• Assist engineers in process optimization, equipment setup, and the development of new manufacturing processes and procedures.
• Monitor SMT line performance, identify potential issues, and implement corrective actions to improve efficiency, quality, and yield.
• Provide technical support to production operators, offering guidance and training on SMT equipment operation and basic troubleshooting.
• Document all maintenance activities, repairs, and process changes accurately and thoroughly.
• Participate in root cause analysis for production defects and implement effective solutions.
• Adhere to all safety regulations and company policies, maintaining a clean and organized work environment.
• Collaborate effectively with cross-functional teams, including production, quality, and engineering, to resolve issues and achieve production goals.
• Flexibility to work night shifts, including weekends and holidays as required.

Job Qualifications

• Associate's degree in Electronics, Mechatronics, or a related technical field, or equivalent practical experience.
• Minimum of 3-5 years of experience as an SMT Technician or similar role in a high-volume manufacturing environment.
• Strong understanding of SMT processes, equipment operation, and common defects.
• Proficiency in troubleshooting and repairing complex SMT machinery, including electrical, mechanical, and pneumatic systems.
• Ability to read and interpret schematics, technical drawings, and equipment manuals.
• Experience with various SMT equipment manufacturers (e.g., Fuji, Panasonic, Mycronic, Juki, DEK, MPM, BTU, Koh Young, Mirtec) is highly desirable.
• Familiarity with IPC standards and quality control principles.
• Excellent problem-solving skills and attention to detail.
• Strong communication and interpersonal skills, with the ability to work independently and as part of a team.
• Proficient in using standard hand tools, diagnostic equipment, and computers.
• Ability to lift up to 35 lbs and stand for extended periods.

Job Summary

• Perform preventative maintenance and calibration on SMT equipment (e.g., screen printers, pick-and-place machines, reflow ovens, AOI) according to established schedules and procedures.
• Diagnose and repair complex SMT equipment malfunctions, including mechanical, electrical, and software issues, in a timely manner to minimize downtime.
• Assist engineers in process optimization, equipment setup, and the development of new manufacturing processes and procedures.
• Monitor SMT line performance, identify potential issues, and implement corrective actions to improve efficiency, quality, and yield.
• Provide technical support to production operators, offering guidance and training on SMT equipment operation and basic troubleshooting.
• Document all maintenance activities, repairs, and process changes accurately and thoroughly.
• Participate in root cause analysis for production defects and implement effective solutions.
• Adhere to all safety regulations and company policies, maintaining a clean and organized work environment.
• Collaborate effectively with cross-functional teams, including production, quality, and engineering, to resolve issues and achieve production goals.
• Flexibility to work night shifts, including weekends and holidays as required.

Job Qualifications

• Associate's degree in Electronics, Mechatronics, or a related technical field, or equivalent practical experience.
• Minimum of 3-5 years of experience as an SMT Technician or similar role in a high-volume manufacturing environment.
• Strong understanding of SMT processes, equipment operation, and common defects.
• Proficiency in troubleshooting and repairing complex SMT machinery, including electrical, mechanical, and pneumatic systems.
• Ability to read and interpret schematics, technical drawings, and equipment manuals.
• Experience with various SMT equipment manufacturers (e.g., Fuji, Panasonic, Mycronic, Juki, DEK, MPM, BTU, Koh Young, Mirtec) is highly desirable.
• Familiarity with IPC standards and quality control principles.
• Excellent problem-solving skills and attention to detail.
• Strong communication and interpersonal skills, with the ability to work independently and as part of a team.
• Proficient in using standard hand tools, diagnostic equipment, and computers.
• Ability to lift up to 35 lbs and stand for extended periods.

Senior Project Manager – Process Mechanical (Raleigh, NC)

Supporting a full-service industrial contractor specializing in mechanical, hygienic piping, HVAC, and electrical/instrumentation trades serving life sciences, advanced manufacturing, and food & beverage industries from design through execution, while prioritizing safety, quality, and client satisfaction.

We are seeking a Senior Project Manager to join the Process team in Raleigh, NC. This role offers an entrepreneurial environment where your leadership drives the success of multiple, large-scale projects simultaneously.

Responsibilities

• Manage fabrication and installation of process piping, utility piping, HVAC, plumbing, structural steel, equipment setting, and medical gas systems.
• Champion safety and enforce standards in healthcare, industrial, and bio-pharma environments.
• Review estimates and establish job costing systems for labor, materials, and subcontractors.
• Negotiate and manage vendor/subcontractor agreements; ensure compliance with contract specifications.
• Conduct monthly cost reviews and progress reports to ensure projects stay on time and on budget.
• Build strong relationships with clients, general contractors, subcontractors, vendors, and internal teams.
• Oversee all aspects of project planning and execution, including pre-planning meetings, scheduling, site visits, quality control, cost tracking, and change management.
• Troubleshoot installation issues and maintain client satisfaction.

Qualifications

• 10+ years of project management experience in process mechanical subcontracting (process piping, HVAC, plumbing, structural steel, equipment setting).
• Proven success managing projects of $5M or more.
• Bachelor’s degree in engineering, construction management, or equivalent experience.
• Strong planning, organizational, and technical skills.
• Proficiency in Microsoft Office and project management software.
• Excellent communication, leadership, and mentoring skills.
• Creative problem-solving and root cause analysis capabilities.
• Ability to travel approximately 30% per month.

Benefits

• Professional development and continuous learning
• 401(k)
• Health, dental, and vision insurance
• Paid time off (PTO)

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.

L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

Job Title: Senior Specialist, Systems Engineering

Job Number: 33932

Job Location: Yorba Linda, CA

Job Schedule: 4/10

Clearance: Must Have the Ability to Obtain and Maintain a Department of War Security Clearance

Job Description:

The Senior Specialist, Systems Engineer is a senior professional with strong knowledge of job area and broad knowledge of project management. Work is performed with general oversight. May manage large projects or processes that are both inside and outside of immediate job area. Typically responsible for managing complex projects at this level, involving delegation of work and review of work products. Communicates within and outside of own function or business area and has responsibility for communicating with parties external to the organization (e.g., customers, vendors, etc.) when necessary. Identifies and addresses changes within own job area. Works to achieve operational targets with direct impact on the departmental results. Work consists of making moderate to substantial improvement or enhancements to systems and processes to improve performance of job area. Problems are generally solved through creative solutions, drawing from prior experience and in-depth analysis of issues.

The Range and Test Solutions business area is responsible for sustaining and upgrading flight test instrumentation including Underwater Acoustics, Telemetry, Communications, Data Recording systems, and/or Radar.

Essential Functions:

• Support digital engineering and Model-Based Systems Engineering (MBSE)
• Conducting trade studies
• Generation of requirements specifications
• Generation of functional block diagrams, use-case diagrams, etc.
• Integration and test planning, including generation of plans and procedures.
• Interfacing with the other engineering disciplines (e.g. mechanical, project, etc.) to ensure proper coordination of the systems aspects of the project.
• Generate and/or update drawings, parts lists, Engineering Orders, wiring lists, diagrams, and schematics.
• Generation of Engineering Change Orders
• Creation and presentation of design review materials
• Verification of system interfaces
• Must have the ability to travel.
• Work to influence others to accept individual or team's views or practices and changes to concepts, practices, and approaches.

Qualifications:

• Bachelor's Degree and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience.
• Must have the ability to obtain and maintain a Security Clearance
• 5+ years of direct Engineering experience

Preferred Additional Skills:

• Direct experience working with at least one of the following technologies: Underwater Acoustics, Telemetry, Communications, Data Recording systems, and/or Radar.
• Excellent written and oral communication skills.
• Demonstrated initiative, drive, and interpersonal skills.
• Familiarity with DOORS requirements management software
• Familiarity with Model-Based Systems Engineering (MBSE)
• Proficiency with MS Word, Excel, and PowerPoint

In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is MIN $106,500.00 - $197,500.00 MAX. The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio, and Vermont is $92,500.00 MIN - $171,500.00 MAX. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

#LI-KM1

L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.