Electrical Assembler Job Description Jobs in Usa
2,504 positions found — Page 13
The Electrical Instrument Technician maintains, constructs and repairs electrical distribution, lighting, computer and PLC systems within the plant, as well as assembles, installs, tests and maintains electrical or electronic wiring, equipment, appliances, apparatus and fixtures. They will also diagnose malfunctioning systems using test equipment and hand tools to locate the cause of a breakdown and correct the problem.
This position is for night shift Wednesday thru Saturday. 4pm-4am
BenefitsAt CalPortland, we’re proud to offer a comprehensive, competitive benefits package that provides health and financial support to our most important resources: our employees. Your benefits are an important part of your overall compensation at CalPortland. That’s why we give you a wide range of benefits to choose from. All regular full time employees may enroll in a variety of health and welfare plans including medical, dental and vision plans. Other benefits include life insurance, disability coverage, employee assistance program, and retirement program. The company also has a variety of voluntary benefits for employees to choose from.
Compensation$39.38 to $40.30 + shift differential
Responsibilities- Calibrates, designs, reconfigures, assembles, installs, inspects and maintains electrical systems and equipment, such as motors, generators, commutators, speed reducers, switchboards, circuit boards, lighting circuits, SCR, electronic control devices, computers and circuits, etc.; uses blueprints and related resources to complete tasks and checks/verifies work to ensure proper operation
- Uses necessary instruments and tools such as voltmeters, ammeters, V.T.V.M’s, bridges, computers, laptops and any other industrial electrical/electronic analyzing equipment and tools needed in carrying out responsibilities
- Sets up and uses rigging to handle tools and equipment, such as manlifts and cranes; climbs poles or uses mobile equipment to run, repair, modify, remove, clean, etc., power lines and all associated equipment
- Designs, prepares, modifies and maintains logs, reports, charts, schematics, prints and any other paperwork incidental to duties
- Maintains equipment, work areas, measuring instruments and tools
- Performs minor mechanical work such as removing covers, lids or obstructions prior to electrical repair work; performs cutting and welding; paints electrical/electronic panel, switchgear, motor windings, insulating equipment, control station, etc.
- Changes motors and performs alignments
- Maintains process analyzers
- Performs other duties as assigned by manager
High school diploma/GED
Requirements/Qualifications- Physical requirements: sit, stand, stoop, bend for extended periods of time (up to 8 hrs.), climb, and lift up to 70 lbs.
- Walk on all types of surfaces (uneven and/or slippery ground)
- Ability to work in surroundings that include dust, vibration, heights and confined spaces
- Must work in all weather conditions: heat, cold, wet, dry and/or dusty conditions and near hot kiln process
- Exposure to cement, clay, limestone and various chemicals. See MSDS for more details
- Able to work rotating and flexible hours
- Able to work effectively both independently and as part of a team
- Good verbal and written communication skills
- Experience with or knowledge of all types of equipment used in the manufacturing of cement preferred
Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.
#LI-PW1
Job Description
BAS Industrial Services is looking for an experienced lead mechanical & electrical maintenance technician (Tech 3). Only candidates with a minimum of 10 years conveyor experience will be considered for Tech 3 positions. Work history must be verified with references before being invited to an interview. BAS is a growing company, with advanced opportunities for those who qualify. If you have less than 7 years of experience, look for BAS Industrial Service entry level position posting. Great way to learn a new trade and get paid to do it.
About this position:
* The probation period (90 days) will provide you with an opportunity to demonstrate your skills, knowledge and work ethic. At 90 days if you have had no infractions, safety violations, good punctuality, good attendance you will become a permanent BAS employee. Milestones will be set for advance pay.
Responsibilities:
This position requires a very serious, organized and mature individual who can perform under pressure. Each shift often comes with different challenges. Lead Tech 3 must have the ability to solve these challenges by developing plans, directing resources to overcome unexpected breakdowns. Lead Tech 3 are responsible but not limited to the following:
* Enforcing safety discipline on all assigned tasks, leading by example, and mentoring other techs.
* Oversee safety meetings, safety training and ensure safety paperwork is completed.
* Promoting and conducting good housekeeping practices.
* Develop and maintain a good working relationship with customers and other BAS techs.
* Maintain and troubleshoot all conveyor systems, electrical and mechanical.
* Design solutions for difficult problems, be on call for emergencies, and handle multiple projects and daily activities.
* Manage Preventive Maintenance programs.
* Ability to install, maintain, and troubleshoot relay logic, ladder diagrams, and control components-- photo eyes, motor starters, relays, limit switches, proximity sensors, timers, solenoids, Servo drives, frequency inverters, linear drives, techs, and encoders.
* Understanding of PLC programs to troubleshoot ladder logic (read use for troubleshooting), components (CPU back plains, I/O boards, counters, modules, and devices) and communications modules (Ethernet)
* Manage outside contractors when needed.
* Physically capable of regular bending, lifting, stretching and reaching both below the waist and above the head.
* Engage in full manual dexterity in both hands and wrists.
* Capable of walking in the FC/DC and around area with great frequency; facilities are over a quarter mile in length.
* Capable of climbing ladders and gangways safely and without limitation.
* Ability to work in construction /distribution environments that may be noisy, unlit, unheated, not air-conditioned.
* Access all areas of building (ascending and descending ladders, stairs, etc.)
* Manage maintenance shift, assign tasks to technicians.
* Develop plans on the fly and direct resources to perform repairs of unscheduled breakdowns.
* Maintaining, troubleshoot, perform scheduled repairs of machinery and conveyor systems.
* Paperwork - Order parts, facilitate customer work orders, document daily work log, keep time records of employees.
Skills/ Experience Needed:
.Computer - Excel, Word, look for parts on internet. Computer savvy.
. Read electrical schematics, understand AC, DC, relay logic, controls, and motors.
. Read hydraulic systems.
* Electrical - Understand and read electrical schematics and drawings. Understand AC power, DC power, relays, relay logic, push buttons, switches, PLC's, VFD's, DC drives.
* Mechanical - Understand and read mechanical drawings, change motors, gearboxes, bearings, repair chain system, replace conveyor belt lacing and belt tracking.
* Hydraulics - Understand and read hydraulic schematics.
For more information, please contact BAS Industrial Services.
Company Description
Electrical / mechanical contracting business. We provide scheduled and unscheduled repair and maintenance service to the material handling industry.
Majority of our work is with conveyor systems.
Company Description
Electrical / mechanical contracting business. We provide scheduled and unscheduled repair and maintenance service to the material handling industry. \r
Majority of our work is with conveyor systems.
- $41.62 Contract Duration: 3 Months Shifts: 2nd shift: 1:45pm-10:00pm 3rd shift: 9:45pm-6:00am Top 3 Skills: Steam & Hydraulics Welding Some electrical Description: Company partners with customers to provide differentiated paper and packaging solutions.
39,000 team members support customers worldwide from over 250 locations in North America, South America, Europe, and Asia.
The Opportunity: Provide safe and timely electrical support, preventative maintenance, installation, service, repair, troubleshooting, and resolution of operating machines in a manufacturing industrial environment.
Ideal candidate will have mechanical and electrical experience, familiarity with hydraulics and pneumatics, and basic troubleshooting skills with proven machine repair ability.
Responsibilities: Utilize electrical/mechanical skills to maintain machinery.
Contribute to a collaborative safety culture that drives results.
Provide rapid response to ensure seamless productivity.
Requirements: 2-3 years of experience in troubleshooting industrial electrical control systems down to component level.
Operational knowledge of automated industrial machinery, including motors, servos, pumps, drives, relays, 3-phase power, communication devices, industrial/electronic controls, and power transmission systems.
Good understanding of hydraulic and pneumatic systems.
Able to install and set up both A/C and D/C drives.
PLC troubleshooting and problem-solving ability with practical, mechanical, and electrical aptitude.
Must be able to read and interpret both electrical and mechanical drawings.
Working knowledge of power transmission equipment and bearings.
Basic welding skills preferred but not required.
Familiar with pumps, both air and electric.
Able to install and troubleshoot basic 3-phase motor control circuits.
Some knowledge of various types of sensors and limit switches.
Familiar with computers and Microsoft software.
Strong written and verbal communication skills.
Ability to work independently in a mature and professional manner.
Ability to work flexible hours, including overtime.
(At Corteva Agriscience , you will help us grow what is next. No matter what your role, you will be part of a team that is building the future of agriculture – solving the world’s food problems through innovation, technology, and putting people first. If you want to collaborate with knowledgeable colleagues who take pride in their work and excel at everything they do, then this is the perfect place for you!
Corteva has an exciting opportunity for an Electrician to join our team at our Renwick, Iowa production facility. Corteva offers excellent salary, vacation, health, retirement, and many various benefit packages.
The Renwick Production location runs soybean seed conditioning and packaging activities, which are typically 3 shifts during peak season, October through March each year. This includes but is not limited to the following: running one to three 8–10-hour shifts (5-7 days per week, with 1-2 days off) rotating shifts with premium shift bonus.
During off-peak months, April through September, the site typically runs one or two 8-10-hour day shift schedule, with occasional overtime when needed. Ensure operation of company equipment including electrical, automation, mechanical, instrumentation, control devices, and HVAC, for process and facility.
Perform electrical repairs, service, troubleshooting and scheduled inspections of equipment, following the prescribed guidelines and procedures.
Lead and assist teams with the electrical safety programs, and other relevant maintenance programs, to ensure coworker safety, adherence, and compliance.
Adhere to all quality systems & safety procedures including environmental regulations, OSHA, PSM, and Corteva’s safety procedures in everyday work routine.
Make recommendations for improved safety through electrical programs and/or process changes including the addition of new devices, software, and hardware.
You have a high school diploma or equivalent.
You are comfortable with technology and possess a good computer aptitude including the use of Microsoft Applications (Outlook, Word, Excel, PowerPoint, etc.), and are willing and able to learn other company specific applications as required.
Climb and/or work in elevated and dusty areas, Stand, and sit for extended periods, Work both outdoors and indoors in hot, cold, wet, and dry conditions, lift up to 50 lbs. You are willing and able to maintain detailed equipment records and prints as required.
You will always work safely and follow all safety policies and procedures to ensure you, and your colleagues go home safely every day.
You value serving our customers and know operations must be supported for optimal uptime. You are willing and able to work overtime and shift hours, which include weekend and holidays during seasonal peaks to support production demand.
Journeyman or Master Electrician certification.
Associate or Two-Year Trade School Degree within the Technical, Electrical, or Mechanical field
Experience with a work order and part inventory system
Knowledge and/or experience with Automation and Programmable Logic Controls (PLC)
Previous industrial electrical/maintenance work with production equipment – (electrical, automation, mechanical, hydraulics, instrumentation and controls, HVAC, and general maintenance experience).
Experience with SAP (or similar system) for work orders, parts orders and parts inventory
Work Authorization and Relocation:
No Visa Sponsorship offered or available for this position.
No relocation allowance offered or available for this position.
Site Dedicated (100% at Corteva location):
This role will be on-site at our Corteva location in Renwick.
Occasional overnight travel for training.
Four weeks of paid time off and two weeks of well-being pay per year, plus paid holidays
Future planning with our competitive retirement savings plan and tuition reimbursement program
We seek applicants from all backgrounds to ensure we get the best, most creative talent on our team.
Corteva Agriscience is an equal opportunity employer. We are committed to embracing our differences to enrich lives, advance innovation, and boost company performance. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, military or veteran status, pregnancy related conditions (including pregnancy, childbirth, or related medical conditions), disability or any other protected status in accordance with federal, state, or local laws.
Date Posted:
2026-03-10Country:
United States of AmericaLocation:
US-AZ-TUCSON-801 ~ 1151 E Hermans Rd ~ BLDG 801 (External Site)Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start dateAt Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
Raytheon’s Air Launched Effector Guidance Systems (ALEGS) Department is responsible for the delivery of affordable and innovative electrical products. The ALEGS Department is currently hiring a Sr. Electrical Engineer - Effector Guidance Systems position in Tucson, AZ to drive program execution including cost, schedule and technical oversight throughout the product lifecycle. Providing resources to drive development and sustainment activities of airborne electrical products. Our multi-disciplined teams manage a variety of engineering projects while maintaining a work life balance.
What You Will Do
- Collaborate with Operations, Supply Chain, Quality, and other Engineering disciplines to resolve issues that may arise during production, testing, and integration.
- Qualified candidates must have experience with digital, analog and/or RF testing and experience debugging complex circuit card assemblies or electro-mechanical systems. Knowledge of RF / microwave devices preferred.
- Travel Requirements: less than 10% annually
- Shift Information: 2nd Shift (3pm - 12am)
What You Will Learn
- One will gain knowledge of various electrical components, Circuit Card Assemblies, RF, analog, digital and / or mixed signal circuit design or analysis
- One will achieve an RTX Core Certification and a Raytheon Responsible Engineer Authority (REA) Certification
Qualifications You Must Have
- Typically requires a Bachelor’s degree in Engineering, Science, Physics, Mathematics, or a related STEM degree and a minimum of 5 years prior relevant experience
- Experience with any of the following: RF, analog, digital, and / or mixed signal circuit design or analysis and / or digital signal processing.
- Electronics circuit troubleshooting and/or failure investigation
Qualifications We Prefer
- Experience performing electrical engineering design of CCA, or electronic subsystem; including circuit design, CCA assembly, electrical test and production/supplier/sub-tier supplier support of test equipment, test automation scripting, test conduction, sensor control, printed circuit board fabrication, circuit card assembly processes and related industry specifications.
- Experience with electrical engineering design tools such as: Mentor Graphics Designer, PSPICE, System Vision, MATLAB, Mathcad, IDL, Computer Simulation Technologies (CST), Microwave Design Studio, High Frequency Structure Simulator (HFSS), Advanced Design System (ADS),
- Experience with electronics test equipment such as: Signal Generator, Oscilloscope, network analyzer, and Spectrum Analyzer.
- Test problem investigation experience
- Experience in applying Statistical Process Control (SPC) methods in achieving production yield improvements.
- Experience in resolving production issues and oversight of suppliers and sub-tier suppliers.
- Technical writing and formal presentation experience
- Leadership of small technical teams, including technical oversight and direction, cost estimation, tracking & reporting, coordination, preparation of detailed technical team reports, and proposal support.
- Ability to perform work with autonomy and little oversight
What We Offer
- Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
- Work Schedule: Monday – Friday 2nd Shift (3pm - 12am)
- Relocation Eligibility: This position is eligible for relocation
Learn More & Apply Now!
- Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
- This position requires onsite work in Tucson, AZ:
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
MEP Manager, Electrical
Location:
Dallas, TX
Job Id:
720
# of Openings:
1
TITLE: MEP MANAGER, ELECTRICAL
LOCATION: Dallas, TX
POSITION SUMMMARY:
The MEP Manager, Electrical will lead efforts coordinating the Electrical trades on major construction projects and work with the Project Team to ensure successful installation and completion of all MEP trade work.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* Estimate and scope MEP trades during pre-construction (as applicable / future support)
* Review Contract Documents, making suggestions/modifications as they relate to the MEP trades and approved construction drawings and specifications
* Review BOD for MEP compliance
* Review and coordination of submittals and shop drawings
* Act as Energy Marshall in the isolation and energization of all electrical equipment in accordance with the safety plan.
* Assist Superintendent and Field Staff in managing MEP subcontractors throughout duration of the project (from groundbreaking through commissioning and turnover to owner)
* Assist with scheduling MEP installation activities
* Review, inspect, and provide oversight of construction drawings during MEP installation
* Work with Superintendent on project logistics and temporary facility plans
* Review and comment on scope, material, and equipment for MEP systems prior to installation
* Monitor the installation and start-up of MEP systems and commissioning of project with Engineer & Owner
* Inspect MEP installation during construction.
* Review Coordination and Arc Flash studies
* Review and provide field verification of torque and meggar reports provide by trades, and assure reports are submitted during final turnover
* Coordinate activities, materials procurement and other related activities with Project Superintendent and Field Staff
* Communicate progress and prepare appropriate reports as needed (Procore)
* Represent SE MCS regarding the MEP process at weekly Owners and contractors' meetings
* Mentor project staff, if applicable
* Lead and direct the coordination process to resolve all conflicts during installations and start-up
* Perform other duties as assigned.
* Significant local travel (within DFW region) required for this role - 70%-100%
*Schedule shifts may incl nights/weekends as per bell curve requirements
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience (Desired):
* Bachelor's/Associates Degree a plus or comparable experience in mechanical, electrical or fire protection/life safety engineering, construction management.
* Construction trade specific experience with increasing levels of responsibility and demonstrated abilities to direct the work of others.
Must be a US Citizen
Computer Skills:
* Proficient in Microsoft Office or related software, Procore preferred
Certificates and Licenses:
* Master Electrical License preferred
* OSHA 30 preferred
Supervisory Responsibilities:
* Supervises subordinate employees. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems.
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* Occasionally lift and/or move up to25pounds, and ability to bend, stoop, kneel, crouch, or crawl. Frequent use of hands to fingers, and ability to reach with hands and arms. Specific vision abilities required include close vision, ability to adjust focus, and ability to see color. Requires eye-hand coordination and manual dexterity sufficient to operate office equipment. Requires normal range of hearing and eyesight to record, prepare and communicate written or online documentation. Involves contact withother individuals. Frequent sitting, standing, and walking. Work is performedprimarilyindoors.
*Salary Negotiable*
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
CPG Participates in E-Verify
Pay Range: $113,752 - $170,661 per year
Apply for this Position
LocationAtlanta, Georgia
Full/Part TimeFull-Time
Regular/TemporaryRegular
Add to Favorite JobsEmail this Job
About Us
Overview
Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.
About Georgia Tech
Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.
Georgia Tech's Mission and Values
Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:
1. Students are our top priority.
2. We strive for excellence.
3. We thrive on diversity.
4. We celebrate collaboration.
5. We champion innovation.
6. We safeguard freedom of inquiry and expression.
7. We nurture the wellbeing of our community.
8. We act ethically.
9. We are responsible stewards.
Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.
Job Summary
The Electrical Integrator L2 will provide technical support to program managers, project directors, task leads, and senior-level Electrical Integrators. The Electrical Integrator L2 will help with mid-level troubleshooting, repair, and maintenance of electrical cables, circuits, and assemblies.
This position will interact on a consistent basis with: faculty and staff project/task leaders, technical leads, contractors, and vendors
This position typically will advise and counsel: faculty and staff project/task leaders, technical leads, contractors, and vendors
This position will supervise: N/A
Responsibilities
Job Duty 1 -
Support program managers, project directors, and task leads with mid-level electrical assembly work such as cable assembly fabrication, and electrical chassis fabrication and assembly
Job Duty 2 -
Help with mid-level testing and troubleshooting of circuits and systems
Job Duty 3 -
Provide intermediate levels of maintenance and repair of printed circuit boards and printed circuit board assemblies
Job Duty 4 -
Assist with kitting parts using a Bill of Materials or other online inventory tools; help provide data entry for online inventory tools
Job Duty 5 -
Support other work teams, as needed, with skills such as mechanical assembly, welding, metal work, drafting, parts inventory, and technical documentation
Job Duty 6 -
Provide guidance to more junior-level technicians
Job Duty 7 -
Perform other job-related duties as assigned
Required Qualifications
Educational Requirements
Technical Diploma, Associate's Degree, or two years college course work, or an equivalent combination of education and experience
Required Experience
Two to five years of job-related experience
Preferred Qualifications
Preferred Experience
IPC-610
IPC-620
J-STD-001
IPC-7711
IPC-7721
Knowledge, Skills, & Abilities
ABILITIES
Experience using crimping tools preferred
KNOWLEDGE
Familiarity with hand tools and a basic understanding of AC/DC circuits; a basic understanding of RF cables and build processes preferred
SKILLS
Basic skills in PCB assembly, electrical assembly wiring, and soldering preferred
USG Core Values
The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.
Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.
Equal Employment Opportunity
The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The University is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and University policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.
Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of race, ethnicity, ancestry, color, religion, sex (including pregnancy), sexual orientation, gender identity, gender expression, national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. This prohibition applies to faculty, staff, students, and all other members of the Georgia Tech community, including affiliates, invitees, and guests. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.
More information on these policies can be found here: policymanual/section6/c2714 Board of Regents Policy Manual | University System of Georgia ( ).
Other Information
This is not a supervisory position.
This position does not have any financial responsibilities.
This position will not be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel.
This position does require the ability to obtain and maintain a security clearance.
This position is located in Atlanta, GA
Salary Job Grade A11
Recruiting Range: $ $23.99 to $32.62 based on experience
Background Check
Successful candidate must be able to pass a background check. Please visit employment/pre-employment-screening.
Michelin is hiring!
- - - - - - - - - - - -
This opportunity is in Woodburn, Indiana in our BF Goodrich tire plant. Woodburn is a small town located about 30 mins east of Fort Wayne, IN. Fort Wayne is the cultural and economic center of northeastern Indiana and the second largest city in Indiana. Established in 1961, our plant makes passenger and light truck tires.
THE OPPORTUNITY
Michelin has an immediate opening for an Electrical / Automation Engineer to lead, design, and implement electrical and automation solutions to improve our performance in safety, quality, productivity, delivery, cost, and innovation. Michelin's purpose is to support everyone's right to move freely to find their better way forward. Innovation and performance open mobility opportunities to people who were limited geographically or economically before. Entry level training is provided by Michelin and will include formal classes and on-the-job mentoring under an experienced area expert. If respect for people, teamwork and trust are some values you live by you should consider joining us, the Worldwide leader in Tires!
Michelin / BFG is a global tire manufacturing company in the middle of an exciting digital transformation, with a vision of factory of the future using advanced robotic technology and data-driven engineering solutions. We are seeking a highly skilled and motivated Automation Engineer to join our BFG Manufacturing Engineering team near Fort Wayne, Indiana. As an Automation Engineer, you will play a crucial role in designing and implementing automation solutions that drive efficiency and productivity across our manufacturing operations. You will be responsible for leading projects from conception to completion, collaborating with cross-functional teams to develop innovative solutions that leverage advanced technologies such as smart material handling, robotics, AGV, ASRS, vision systems, machine learning and artificial intelligence.
WHAT WILL YOU DO
- Conduct pre-studies, prototypes, and pilots to capture business requirements and determine the best solutions in terms of costs/benefits, deadlines, risks, and functional capabilities.
- Design, build, and lead implementation projects to improve plant performance by replacing outdated systems, improving existing equipment, or adding new innovations to make progress.
- Implement and monitor actions necessary to mitigate risks (calculations, simulations, tests, etc.)
- Implement best practices for automation design and development, including worldwide sharing of best practices.
- Develop and maintain relationships with suppliers, vendors and contractors.
- Stay up-to-date with emerging trends and technologies in automation.
- Provide detailed electrical design and automation programming for assigned projects.
- Provide estimates and technical schedules for all phases of process equipment addition, replacement or upgrade.
- Provide backup support and training to plant maintenance teams on new automation systems that they implement.
Additional for Senior Level
- Start to finish technical Project Management including risk, schedule, budget, and resources.
- Lead/Participate in system approvals, qualification, and validation of industrial robustness.
- Manage change requests, approvals, and change testing.
- Assist local technicians in troubleshooting and root cause analysis as needed.
- Interface with internal company support groups to accomplish objectives and provide contract engineering management and direction when needed.
WHAT WILL YOU BRING
- Bachelor's degree in Electrical Engineering, Automation, or related field, or equivalent technical experience.
- Ability to set and achieve goals with minimum supervision.
- Success in working with other people or a team to meet a common objective.
- Developed/implemented team or group project plans that met or exceeded expectations.
- Demonstrated attention to detail and data accuracy in previous work.
- Experience with electrical design standards and able to complete controls systems designs using standard CAD design tools.
- Knowledge of PLC programming standards & programming software, including GRAFCET, Ladder Logic, and Structured Text. Specific experience with Rockwell / Allen Bradley is a must, with Siemens being a plus.
- Experienced with controls systems network interfaces and various protocols for communications between devices including computer system databases.
- Experienced with Variable Frequency drives and Motion Control technologies. Specific experience with Rockwell, Siemens and Control Techniques is a plus.
- Experienced with HMI configuration, programming, and communication. Specific experience with Rockwell is a plus.
- Experience with electrical design standards and ability to complete power and controls system designs using standard CAD design tools.
Additional for Senior Level
- Minimum 2-5 years' experience in a similar role or 5-7 years in a manufacturing maintenance area.
- Able to prioritize and handle multiple projects simultaneously.
- Ability to work well under pressure and handle strict deadlines.
- Develop and maintain technical documentation for automation solutions.
- Analyze and troubleshoot complex technical issues related to automation solutions.
- Ability to mentor and train junior engineers
- Proven experience in project management, from conception to completion
- Strong understanding of procurement, installation, commissioning, and programming of automation systems
- Strong experience with PLC programming
- Vision System configuration and interface for width measurement applications and defect detection applications is preferred, but not required. Specific experience with Cognex, Keyence, Adept, Bytewise, Gocator is a plus.
- Robotic experience, configuration or knowledge is preferred, but not required. Specific experience with Fanuc or Yaskawa is a plus.
- Experience with advanced robotic technologies such as AGV, ASRS, vision systems, machine learning and artificial intelligence
Join our team and be a part of our global digital transformation journey towards factories of the future. If you have a passion for automation, project management and advanced robotic technologies, we encourage you to apply today. We care about giving people a better way forward as we manufacture the future.
#LI-HIRINGMICHELIN
#LI-RM1
Inspire Motion for Life: Apply Today!
As the leading mobility company, we work with tires, around tires and beyond tires to enable Motion for Life. Dedicated to enhancing our clients' mobility and sustainability, Michelin designs and distributes the most suitable tires, services and solutions for our customers' needs. Michelin provides digital services, maps and guides to help enrich trips and travels and make them unique experiences. Bringing our expertise to new markets, we invest in high-technology materials, 3D printing and hydrogen, to serve a wide a variety of industries-from aerospace to biotech. Headquartered in Greenville, South Carolina, Michelin North America has approximately 23,000 employees and operates 34 production facilities in the United States and Canada.
MICHELIN tires have been ranked the #1 Tire Brand across major categories and segments by industry experts and consumers alike. For nearly three decades we've been recognized for our achievements in Customer Satisfaction, Performance, Durability, Technology and Innovation.
Michelin cares for the personal and professional development of its employees. We support career advancement through various options, which include: skill and career development, training, career exploration and work with cross-functional teams. We offer the possibility of a varied and fulfilling career path in an environment where unique contributions are valued.
Michelin offers 10 Business Resource Groups (BRGs) which are all-inclusive groups created and led by employees who have shared life experiences across various diversity dimensions. Each group supports business strategies and initiatives along with meeting the needs of members. The goal of each group is to help employees feel welcome and included, support employee engagement and encourage professional development. BRGs also provide cross-cultural support, career management resources and opportunities for community involvement.
Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .
This position is not available for immigration sponsorship.
Get in the driver's seat and be on your way to a meaningful professional journey!
Job Duties:
- Provide senior-level leadership and guidance to Project Managers (PMs) and General Foremen (GFs) to support successful project execution.
- Mentor and develop field leadership, including General Foremen and union supervisors, to drive strong performance and ongoing professional growth.
- Partner with the VP of National Operations to develop workforce planning strategies, labor forecasts, and project execution plans.
- Act as a key liaison between executive leadership, labor partners, union representatives, and clients to maintain strong working relationships.
- Oversee large-scale electrical construction projects exceeding $100M, ensuring they are delivered on schedule, within budget, and in alignment with quality standards.
- Review project scope, manpower plans, and budget expectations with field leadership prior to project kickoff to ensure alignment and preparedness.
- Identify potential project risks, challenges, and opportunities, and collaborate with project teams to implement effective solutions.
- Support the development and implementation of prefabrication strategies to enhance project efficiency and productivity.
- Ensure field teams leverage the most effective tools, technologies, and construction methods to maximize operational efficiency.
Job Requirements:
- 12+ years of experience in electrical construction, with significant leadership experience overseeing large-scale commercial or industrial projects.
- Demonstrated experience managing complex projects valued at $100M+ from planning through completion.
- Proven ability to lead and mentor field leadership, including Project Managers, General Foremen, and union field supervision.
- Strong understanding of electrical construction operations, including project scheduling, budgeting, labor planning, and risk management.
- Experience working in union environments and collaborating with union leadership and labor partners.
- Ability to develop and implement labor strategies, manpower planning, and project execution plans across multiple job sites.
- Experience partnering with executive leadership to drive operational efficiency and successful project outcomes.
#HPIND
Join this growing Company in the recycling of plastics through the build-out of new plants. Continuous Process in a PSM regulated environment is what you will need to be successful in this role. Corporate role on site in Atlanta, GA. One plant operational, 2nd plant coming online this year and more in the works!
Role Overview
Our client is seeking an experienced Senior Electrical / Controls Engineer to join their team and support the development of engineering and construction packages for facility expansion and buildouts.
The role will be the primary lead on specification and procurement of instrumentation related to
process control, process indication, and control system infrastructure.
This role reports to Company Electrical Engineering Manager.
Responsibilities
• Assist with the design and modification of new and existing process control and instrumentation systems.
• Specify both discrete, analog, and networked control solutions.
• Prepare specifications, design-bid documentation, and construction estimates.
• Review supplier designs against licensor requirements, code requirements, and customer
requirements.
• Develop instrumentation standards to ensure selection compliance across multiple facilities.
• Develop maintenance procedures for instrumentation and control systems.
• Develop inspection plans for instrumentation and control systems.
• Develop commissioning plans for projects and system upgrades as required.
• Make recommendations for additional equipment as necessary.
• Participate in the review of Management of Changes, PHA Action Requests, Construction
Information Requests, and Change Order Requests.
• Experience in continuous process manufacturing in all the following project phases:
documentation, detailed design generation, implementation, system integration, testing and on-site, startup, using PSM (Process Safety Management) elements and Industrial standards.
• Assist with local, state, and federal permitting applications.
• Potential to travel to other Nexus locations or vendor locations for meeting or Factory Acceptance
Testing (FAT) as required (~10%).
• Design and specify 480V distribution infrastructure, motor control centers, VFD panels, PLC
panels, RIO panels, and other control panels.
• Assist with local, state, and federal permitting applications.
Education
• BS in Electrical Engineering or extensive documented experience in lieu of engineering degree.
Experience
• 10+ years previous experience developing PLC programs, using multiple vendor hardware, for
process and discrete controls. Rockwell ControlLogix (primarily), Codesys, Siemens TIA Portal.
• 7+ years designing electrical control, motor control and heater control panels.
• 7+ years’ experience using AutoCAD Electrical.
• 7+ years of field installation / construction experience
• Strong background and understanding of P&ID drawings.
• Knowledge and experience with applicable NEC, UL / CSA standards for electrical equipment &
Electrical construction best practices.
• Previous experience with PSM-covered facilities.
• Previous experience working with Management of Change (MOC) and Continuous process
Improvement programs.
• Experience with multiple industrial communication protocols, i.e. Ethernet I/P, Modbus TCP / RTU,
Profibus / Profinet, etc.
• Industrial Power distribution systems to 480 VAC.
• Exposure to Medium Voltage power distribution (4160 VAC or higher).
Knowledge, skills, and abilities
• Self-starter with strong initiative.
• Entrepreneurial spirit and attitude.
• Ability to manage multiple projects on different timelines.
• Comfortable in a fast-paced, purpose-driven, collaborative environment.
• Experience working with multiple outside engineering groups.
• Demonstrate a strong desire to learn manufacturing processes.
Must be authorized to work in the USA without the need for sponsorship now or in the future.
