Dsm Axis Examples Jobs in Usa

Essential Job Functions:

Develops, evaluates, and improves manufacturing processes while maintaining compliance to design specifications.

Programming of equipment, creation of CNC code, and tool path simulation.

Primary contact for design engineering or program management on manufacturing processes.

Creates and maintains manufacturing methods, Bill of Materials, and labor standards in ERP system.

Participates in activities related to C.I. and cost reductions/process improvements.

Design, construction, and validation of tooling, fixtures, gages, and equipment.

Workflow / cell design with a focus on waste reduction and process improvement.

Analysis of manufacturing variances to help identify key areas in need of improvement.

Troubleshoot and solve manufacturing problems in a machining environment.

Support Supply Chain and Quality with supplier development activities as needed.

Mentor/guide lower level manufacturing engineers.

Support customer complaints and concerns.

Provide support for Lean manufacturing and continuous improvement initiatives, companywide.

Other duties, reporting, special assignments, or projects as needed and assigned.

Must remain current with, and complete all required training as assigned.

Must adhere to Company Corporate EHS Policy and department, occupation, and task specific safety protocols, including but not limited to Personal Protective Equipment (PPE) requirements.

Qualifications:

5-10 years manufacturing engineering experience.

Minimum 5 years CAD and CAM software experience required. Mastercam preferred.

AutoCAD Inventor 3D modelling or similar software required.

Vericut experience preferred.

Ability to read and interpret complex 2D blueprints and 3D models required.

Working knowledge of GD&T required.

Experience with tooling selection and fixture design required.

Knowledge of both manual and CNC machining equipment, specifically multi-axis (5+) programming experience.

Hands on troubleshooting & problem solving including statistical analysis.

Ability to implement change and train employees in a production floor environment.

Excellent technical, written, and oral communication skills.

Working knowledge of Microsoft products.

Must submit to and satisfactorily pass any pre-employment screening required for employment with the Company.

Must take medical exams required by law, in conjunction with occupation specific activities, the physical work environment, and ongoing industrial hygiene sampling results.

Depending on assignment, may be required to use stairs, remain upright and/or seated for prolonged timeframes, intermittently reposition the body per various tasks performed, and use various tools and work-related supplies.

May be required to perform manual lifting activities, not to exceed a 40lb lift performed by one individual.

Education:

Four-year degree in engineering preferred, but not required (mechanical, aerospace, or manufacturing preferred)

LHH Recruitment Solutions has partnered with a growing organization, and they are seeking a motivated Technical Product & Quoting Engineer – CNC Environment to join their team. This is a pivotal, hands-on role that blends CNC manufacturing expertise, RFQ/quoting ownership, and product engineering leadership. The ideal candidate brings strong experience supporting CNC-machined components from RFQ through production, collaborating closely with engineering, operations, and suppliers. This role supports a diverse customer base across industries including aerospace, pipe fittings, hydraulics, and hose assemblies.

Key Responsibilities:

• Own and develop accurate, competitive CNC RFQs and production quotes for complex machined components and assemblies.
• Analyze customer drawings, specifications, and RFQs to determine manufacturing feasibility, machining strategy, and cost drivers.
• Translate customer requirements into manufacturable CNC solutions, considering tolerances, materials, cycle times, and production methods.
• Collaborate with engineering, CNC programmers, machinists, and production teams to optimize designs for manufacturability, quality, and cost.
• Support CNC production planning by validating routings, estimating run times, tooling needs, and labor requirements.
• Lead product definition, requirements gathering, and business case development for new and existing products.
• Coordinate prototype builds, first articles, testing, and validation to support customer and internal approvals.
• Partner with sourcing and supply chain teams to support supplier evaluation, CNC sourcing decisions, and cost‑reduction initiatives.
• Monitor product performance, quality metrics, and production feedback, driving continuous improvement initiatives.
• Provide technical guidance and training to internal teams and external partners related to CNC processes and quoting assumptions.
• Track and report key performance indicators including revenue, margin, quoting accuracy, and customer satisfaction.

Qualifications and Skills:

• Bachelor’s Degree in Mechanical, Manufacturing, Industrial Engineering, or related field.
• Significant hands-on experience in a CNC machine shop environment.
• Proven experience with CNC RFQs, CNC quoting, and supporting CNC production in a precision manufacturing environment.
• Strong understanding of CNC machining processes (turning, milling, multi-axis preferred), materials, tolerances, and GD&T/blueprint reading.
• Demonstrated experience estimating cycle times, labor, tooling, and overhead for CNC-machined components.
• Experience working closely with CNC programmers, machinists, and production teams.
• Proficiency with CAD/CAM software and experience navigating ERP/MRP systems.
• Industry experience in aerospace, pipe fittings, hydraulics, hoses, or similar precision manufacturing sectors.
• Strong problem-solving skills, assertiveness, and a collaborative, team-oriented mindset.
• Excellent communication skills with the ability to explain technical and cost concepts to both technical and non-technical stakeholders.
• Familiarity with Lean Manufacturing, Six Sigma, or continuous improvement methodologies is a plus.

Compensation Range: $115,000-$135,000 + 15% Bonus

Benefits Offered: 2 weeks of vacation, paid sick leave where applicable by state law, Medical Insurance, Dental Insurance Vision Insurance, 401K, and Life Insurance.

If you are a passionate Technical Product & Quoting Engineer looking for anew and rewarding career, please apply today! You don’t want to miss out on this opportunity!

LHH is a leader in permanent recruitment—and in the placement of top talent. Our areas of specialty include office administration, customer service, human resources, engineering, and supply chain and logistics. Please feel to check us out and apply for other opportunities if this role isn’t a perfect match.

Equal Opportunity Employer/Veterans/Disabled

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit

Chicago Metro (Bloomingdale, IL)

Travel: 50-60%

If you win deals by understanding engineers, earning trust over time, and positioning capability instead of price, keep reading.

Our client is a well-established, family-owned precision contract manufacturer with a long track record of investment in equipment, quality systems, and long-term customer relationships. They do not chase low-margin, price-driven work. They partner with OEMs that value precision, consistency, and accountability.

They are hiring an experienced Outside Sales Professional to drive new business growth and help expand their footprint in medical, aerospace, and defense manufacturing.

The Opportunity

This role is ideal for a salesperson who:

• Enjoys hunting and building relationships from scratch
• Is comfortable with long sales cycles and delayed gratification
• Can navigate engineers, purchasing, and quality teams
• Wants autonomy and ownership rather than micromanagement
• Takes pride in selling something that is genuinely hard to do well

You will step into a strong manufacturing platform with proven capabilities and leadership support, but you will build your own pipeline.

What You Will Do

• Prospect and develop new OEM relationships in targeted industries
• Sell precision machining and contract manufacturing capabilities
• Work directly with engineers and purchasing teams to quote and win complex work
• Manage opportunities from initial contact through long-term production partnership
• Spend significant time in the field visiting customers and prospects
• Collaborate closely with internal teams on quoting, feasibility, and execution
• Represent the company professionally and credibly in the market

This is a true field sales role, not an inside or transactional position.

What Success Looks Like

• Building a healthy pipeline of qualified OEM opportunities
• Getting designed into programs rather than simply responding to RFQs
• Winning repeatable, long-term production work
• Becoming a trusted partner to customers, not just a vendor
• Growing revenue through relationships, not discounts

What Our Client Is Looking For

Required

• Proven success in B2B outside sales within manufacturing or technical environments
• Experience selling contract manufacturing, precision machining, or custom technical solutions
• Ability to understand engineering drawings and manufacturing requirements
• Strong prospecting and relationship-building skills
• High personal accountability and self-direction
• Willingness to be on-site when not visiting customers

Preferred

• Experience selling into medical, aerospace, or defense OEMs
• Familiarity with precision machining, turned parts, or 5-axis environments
• Existing OEM relationships within targeted industries
• Comfort operating without heavy structure or rigid scripts

Location & Work Style

• Based in the Chicago metro area
• Expected to be on-site full time initially to learn the business
• Increased field time as ramp progresses
• This is not a remote role

Compensation

• Base salary approximately $100,000–$125,000, with bonus
• Ramp support provided due to long sales cycles
• Performance-based upside as the role matures

Title: Sr. Manufacturing Engineer (NPI)

Location: Greater Bethel Area, CT (100% Onsite)

Employment Type: Direct Hire

Status: Accepting Candidates

About the role

Seeking a Senior Manufacturing Engineer to support New Product Introduction (NPI) initiatives within a regulated medical device manufacturing environment. This role focuses on engineering scalable manufacturing processes, supporting product launches, and leading validation activities to ensure production readiness.

Key Responsibilities

• Serve as Manufacturing Engineering lead on NPI programs from concept through production transfer.
• Design and optimize scalable manufacturing processes, tooling, and fixtures.
• Program and troubleshoot CNC machining operations (Milling, Multi-Axis, Wire EDM).
• Lead IQ/OQ/PQ validation, TMV studies, and equipment commissioning activities.
• Create and maintain manufacturing documentation in compliance with ISO 13485 and internal QMS.
• Drive continuous improvement initiatives to enhance quality, safety, and efficiency.

Qualifications

• 5+ years of Manufacturing Engineering experience (flexible to 3–4 years).
• Hands-on experience with IQ/OQ/PQ validation in regulated manufacturing.
• Strong exposure to CNC programming (G-code/M-code preferred).
• Experience supporting high-volume manufacturing processes.
• Knowledge of ISO 13485 and structured QMS environments.
• Must be able to work onsite 100%.

Job Title: Process Engineer, with 5axis CNC experience - Advanced Manufacturing

Location: Stow, OH

Salary: $80,000-$120,000

About the Role:

Join our dynamic team as a Process Engineer, where you'll be at the forefront of developing and optimizing manufacturing processes for complex product lines. This isn't just an engineering role - it's an opportunity to shape production systems, mentor team members, and drive real innovation on the shop floor. If you're passionate about turning designs into reality and thrive in a hands-on manufacturing environment, we want to hear from you.

What You'll Do:

• Lead process development and optimization for new product launches and existing manufacturing lines
• Create and optimize CNC programs using advanced CAM software (Mastercam preferred)
• Design and validate custom tooling, fixtures, and equipment using 3D modeling (AutoCAD Inventor or similar)
• Drive continuous improvement initiatives using Lean manufacturing principles
• Serve as the manufacturing expert for cross-functional teams, providing technical guidance
• Troubleshoot complex manufacturing challenges in a machining environment
• Develop and implement process improvements that reduce waste and enhance quality

What You Bring:

• 5-10 years of hands-on manufacturing engineering experience
• Expertise in CAD/CAM software and CNC programming (5-axis experience required)
• Proficiency in 3D modeling and blueprint reading with strong GD&T knowledge
• Demonstrated experience in tooling selection and fixture design
• Proven ability to solve complex manufacturing problems using data-driven approaches
• Strong leadership skills with experience mentoring junior engineers
• Excellent communication skills and ability to thrive in a collaborative environment

Why Join Us?

• Competitive compensation and comprehensive benefits package
• Opportunity to work with state-of-the-art manufacturing technology
• Strong focus on professional development and continuous learning
• Collaborative team environment that values innovation
• Clear career growth path with opportunities for advancement

Ready to Make an Impact?

If you're ready to take your manufacturing engineering career to the next level, apply now! We're excited to meet passionate engineers who are ready to drive manufacturing excellence.

[Apply Now Button/Link]

#Hiring #ProcessEngineer #ManufacturingEngineer #CNCProgramming #EngineeringJobs #LeanManufacturing #CADCAM #NowHiring #ManufacturingCareers

THIS IS AN IMMEDIATE NEED. Please email me your resume on SUNDAY, March 15th and your availability for a screen on Sunday. In-Person Interviews will take place on Tues, Wed, Thursday.

Swing Shift 100% On-site in San Francisco - Free Employee Parking

Manufacturing Technician

Location: Mission District (100% Onsite)

Schedule: Swing Shift - 3pm - 11pm

Compensation: $35/hour

Duration: 6-Month Contract (Potential for Extensions)

We are seeking an experienced Manufacturing Technician to join our team onsite in San Francisco’s Mission District. This is a hands-on, day-shift role supporting both engineering and production activities in a high-precision manufacturing environment.

Key Responsibilities

• Perform precision soldering, including work with small components
• Follow all safety procedures, including laser safety requirements
• Construct, test, and calibrate engineering and production robotic/computer-controlled assembly systems
• Interpret engineering prints, schematics, and assembly instructions
• Utilize high-precision measuring equipment and maintain detailed calibration records
• Support root cause analysis of manufacturing, quality, and yield issues

Required Skills & Experience

• Minimum 5 years of industry experience
• Strong soldering background, particularly with small components
• Experience with mechanical hand and power tools
• Proficient with oscilloscopes, DMMs, signal generators, optics, and cameras
• Experience working with lasers, laser safety, beam focus, pattern recognition, and active alignment
• Experience with UV adhesive auto-dispense and curing processes
• Experience with multi-axis, vision-assisted, computer-controlled robotic assembly equipment in both R&D and volume manufacturing environments
• Knowledge of pneumatic actuated slides, grippers, and hexapod tables
• Experience identifying root cause of manufacturing, quality, and yield issues
• Proficiency with Microsoft Office, SPC tools, and flowcharting software
• Strong written and verbal communication skills in English

Physical Requirements

• Ability to stand for extended periods
• Ability to lift and carry up to 35 lbs

This is an excellent opportunity for a skilled technician looking for a 6-month contract role with strong potential for extension in a dynamic manufacturing environment.

Role Overview

This role focuses on designing, developing, and supporting control systems for automation and robotic equipment. The engineer will contribute to both new product development and sustaining engineering efforts, working across software, electrical, and mechanical domains to deliver reliable, high‑performance motion‑control solutions.

Key Responsibilities

• Perform kinematic analysis and develop control algorithms for robotic and automated systems.
• Design, implement, and test motion‑control software for prototypes, proof‑of‑concept systems, and production equipment.
• Write and document code that drives multi‑axis motion, servo systems, and automation hardware.
• Collaborate with mechanical and electrical engineering teams to influence system architecture and improve performance related to controls.
• Select, evaluate, and interface with vendors for motion‑control components, sensors, and related hardware.
• Review and contribute to intellectual property evaluations for new concepts and technologies.
• Ensure compliance with applicable regulatory and design standards throughout the development lifecycle.
• Support sustaining engineering activities, including troubleshooting, root‑cause analysis, and system enhancements.
• Travel occasionally for system integration, testing, or vendor engagement (approximately 2–3 trips per year).

Required Qualifications

• Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Computer Science, or related field (Master’s preferred).
• Ten or more years of experience in robotics, automation, or electromechanical system development.
• Proficiency with Galil motion controllers
• Experience programming and configuring PLC systems.
• Strong background in DC motor control, servo systems, and motion‑control hardware.
• Hands‑on experience with programming, debugging, and troubleshooting PLC‑based automation.
• Working knowledge of regulatory standards for hardware and software development (e.g., IEC 60601, ISO 13485, ISO 14971).
• Ability to interpret mechanical drawings, electrical schematics, and system‑level documentation.

Preferred Experience

• Experience with Beckhoff programming
• Object‑oriented software development using C# or C++.
• Experience with the .NET Framework or .NET Standard.
• Understanding of UML state machines and their practical application.
• Knowledge of robotic control theory, including PID control and servo tuning.
• Cross‑platform software development experience.
• Familiarity with CAN bus networking and other industrial communication protocols.

Work Environment & Physical Requirements

• Primarily office‑based work with limited exposure to adverse environmental conditions.
• Frequent use of hands for typing, grasping, and other repetitive motions.
• Ability to sit, talk, hear, and view computer screens for extended periods.
• Ability to lift, carry, or push/pull up to 5 pounds frequently and up to 30 pounds occasionally.
• Additional physical tasks may be required depending on project needs.

POSITION SUMMARY: The primary function of the Production Machinist is to operate production machines under the guidance and direction of the Set-Up Technician while diligently monitoring product quality.

DUTIES AND RESPONSIBILITIES (essential functions of position):

Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. For assigned area and products:

• Power up machines and zero return axis to the home position.
• Follow prescribed quality procedures, identify all dimensions established at the machining operation, and check established dimensions using the in-process inspection sheet.
• Make offsets to tools or work positions to achieve dimensionally acceptable products.
• Understand surface finish requirements and change tools as needed to maintain the finish.
• Utilize shop travelers in production to verify correct material, size, quantity, and any additional notes or work instructions that differ from the customer print.
• Execute start-up procedures following machine crashes or major tool breakages.
• Support workplace organization efforts, including removing and storing fixtures, vices, and stops after jobs, replacing tooling and small tools in designated areas, and cleaning machines.
• Follow procedures for time reporting and scrap reporting via data collection to provide accurate job costing data.
• Adhere to prescribed safety procedures.

ESSENTIAL EDUCATION, SKILLS, EXPERIENCE AND QUALIFICATIONS:

• Education: High School diploma or equivalent.

NONESSENTIAL SKILLS, EXPERIENCE AND QUALIFICATIONS (not necessary but preferred):

• Previous machining.
• Blueprint reading.
• Understanding and application of GD&T.

PHYSICAL DEMANDS AND WORK CONDITIONS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Must be able to work in a manufacturing environment.
• Eyesight and hearing must be correctable to standard level.
• Ability to lift a minimum of 25 lbs and up to 50 lbs on a daily basis.
• Ability to stand for a minimum of 8 hours and up to 12 hours per day.

JOB SUMMARY

Master Technology Group (MTG) specializes in designing, installing, and servicing low-voltage commercial property technologies across local and national markets.

The Integrated Security Systems Technician (Traveling) provides customer-focused, workplace technology support to clients, field staff, installation partners, and internal team members. While most support work is performed remotely, occasional on-site assistance may be required locally and nationally.

Supported systems are primarily security-related, including video surveillance, access control, intrusion detection, and EAS. Additional support may encompass network programming, fire alarm systems, data infrastructure, AV, and other low-voltage disciplines.

An MTG Integrated Security Systems Technician must deliver exceptional customer service and cultivate strong professional relationships with clients, vendors, Local Service Partners (LSPs), and colleagues. This role requires technical proficiency, extensive knowledge of low-voltage systems, excellent organizational and multi-tasking skills, and strong verbal and written communication abilities.

Candidates must reside in the Twin Cities area and are expected to perform most of their work from our Eden Prairie, MN office. Periodic job site responsibilities may be required locally and nationally, with travel up to 60% supporting client sites, installations, and service operations.

To assist with critical service issues, the role includes on-call duties as part of daily responsibilities, requiring availability after hours on weekdays. Weekend on-call shifts will be rotated on a scheduled basis to ensure support during urgent weekend needs.

This position reports to the Manager of Technical Services.

KEY DUTIES AND RESPONSIBILITIES

• Support customers, coordinators, field technicians, and project managers with technical advice, troubleshooting, and resource allocation
• Collaborate with Business Development and Operations to provide pre-sales and post-sales support for MTG solutions and systems
• Deliver remote and hands-on training to field personnel to ensure compliance with all applicable codes, client specifications, and MTG’s quality standards
• Serve as an escalation point for troubleshooting, programming, maintaining, and servicing client systems
• Pre-program, build, and stage equipment for installation when practical, to streamline on-site setup
• Provide remote and on-site programming and commissioning for client systems
• Conduct remote and on-site quality assurance audits to verify system performance and installation standards
• Assist installation, service, and coordination teams with technical planning, issue resolution, and commissioning, ensuring systems operate as intended and meet MTG quality standards
• Provide user training to client representatives
• Provide technical training to field personnel and colleagues
• Contribute to continuous improvement initiatives by providing feedback to management on processes, efficiency, and client satisfaction
• Deliver outstanding customer service and build strong, professional relationships with clients, vendors, partners, and colleagues
• Other duties to support the company vision and goals as requested

QUALIFICATIONS

• Minimum of 5 years of field experience installing, configuring, programming, and servicing video, access control, and intrusion systems
• MN Power Limited Technician License (PLT) required
• Field experience with low-voltage cabling, data infrastructure, fire alarms, EAS, DAS, AV, and other workplace technology systems is advantageous
• Proven ability to design, configure, and program a variety of security-related systems
• Demonstrated experience in delivering user training to client representatives and technical training to field personnel
• Industry certifications such as NICET Video Security Systems Technician, ESA certifications, or equivalent are preferred
• Manufacturer certifications such as Axis Network Video, Milestone, Genetec, Exacq, Bosch, KeyScan, Avigilon, Lenel S2, March Networks, or Open Options are preferred
• Strong interest and motivation to pursue ongoing education and additional certifications
• Solid familiarity with the National Electrical Code (NEC)
• Ability to meet travel and on-call requirements for the position
• Excellent time management and organizational skills
• Strong problem-solving and decision-making capabilities
• Ability to multitask effectively in a fast-paced, multi-project environment
• Proficiency in Windows-based computer environments, including MS Office (Outlook, Excel, Word) and other standard software
• Excellent written and verbal communication skills

PERFORMANCE MEASUREMENTS

• Demonstrates a clear understanding of the key duties and responsibilities of the position
• Shows enthusiasm and effort to perform all aspects of the role effectively
• Exhibits competence and capability to execute key duties and responsibilities efficiently
• Consistently meets expected standards of quality and customer satisfaction
• Completes assigned tasks promptly and adheres to project deadlines
• Represents MTG in a professional manner at all times, embodying the company’s standards of conduct
• Demonstrates sound decision-making through practical analysis, effective problem-solving, and good judgment
• Maintains effective working relationships and collaborates well within a team environment
• Communicates clearly and professionally, both verbally and in writing, including emails, reports, and correspondence
• Demonstrates reliability through consistent attendance, punctuality, and timely completion of tasks
• Embodies MTG’s Core Values:
• People First: Demonstrates humility, helpfulness, and genuine care for others
• Above and Beyond: Exhibits a “whatever it takes” mindset, actively contributing beyond minimum expectations
• Sense of Urgency: Responds promptly and diligently to organizational and client needs
• Team Player: Demonstrates respect, support, and collaboration, sharing expertise generously
• Do the Right Thing: Operates with honesty, integrity, transparency, and strong ethical standards

COMPENSATION AND BENEFITS

Base Salary $85,000 - $110,000+ DOQ

Car Allowance

Phone Stipend

Medical, Dental & Vision Insurance

401k Match

PTO

Nice Healthcare

Life Insurance – Company-provided

STD / LTD – Company-provided

Employee Referral Bonus

Development Opportunities

ABOUT THE JOB

At EnerRenew, we are accelerating the future of clean energy with innovative solutions that seamlessly integrate power generation and mobility. Our technologies span WINDTRACKER, our patterned vertical axis wind turbine system, our AI-driven Energy Management System, and X-Caddie, an autonomous energy storage and mobile charging unit designed for flexible, on-demand EV support. Together, these solutions form a unified clean-energy ecosystem that delivers power efficiently from where it is generated to where it is needed. With teams across the U.S. and China, we combine strong engineering expertise with rapid product development to deliver intelligent, efficient, and impactful energy solutions.

We are seeking a highly organized and proactive Executive Assistant to provide high-level administrative support to our CEO and director team. The ideal candidate is a self-starter with exceptional time management skills, capable of managing diverse office operations and human resources tasks with minimal guidance. This role requires a professional who can maintain confidentiality and act as a primary liaison for internal and external partners.

WHAT YOU WILL DO

• Executive Support: Act as the primary point of contact among executives, employees, clients, and external partners. Assist the CEO with assigned tasks and strategic priorities.
• Office Management: Oversee daily office operations and procedures for both the Mountain View and Saratoga offices. Manage vendors and ensure all office and kitchen supplies are adequately stocked.
• Finance & Accounting Coordination: Manage bookkeeping and office budgets. Process employee reimbursements and manage company financial records in QuickBooks. Coordinate with accountants by organizing and preparing all necessary tax return documents.
• Human Resources: Manage the full employee lifecycle, including recruiting new hires, conducting onboarding, and managing employee retention. Administer employee benefits enrollment and process payroll regularly. Handle HR compliance, process employee terminations, and resolve employee disputes if they arise.
• Project Support: Assist with various projects as needed to support company objectives.
• China Team Support: Act as the primary liaison between the China team and the CEO to coordinate seamless cross-border collaboration. Review and verify travel reimbursements and payroll for the China team for CEO approval.

WHAT WE EXPECT FROM YOU

• Proven work experience as an Executive Assistant, Personal Assistant, or similar role.
• Bilingual in Chinese and English is required for effective team coordination.
• Proficient in QuickBooks and MS Office knowledge.
• Outstanding organizational and time management skills, with the ability to work independently.
• Excellent verbal and written communication skills.

WHAT WE OFFER

• This is a non-exempt position. The salary range for this position is $60,000/year to $80,000/year.
• Our benefits include Health/Dental/Vision Insurance, Paid Time Off (PTO), and paid Public Holidays.

We Are Artificial Lift. It’s what we do. All day. Everyday.

Flowco is redefining well “optimization” with the very latest in USA manufactured gas lift and plunger lift technologies and delivering unrivaled customer support wherever and whenever you need it.

We are seeking a CNC Machinist (2nd Shift) to become an integral part of our team!

This position is located in Houston, Texas.

Job Summary:

The CNC Machinist (2nd Shift) will include but not be limited to these requirements and duties:

• Maintain a positive work atmosphere by acting and communicating in a manner so that you get along with customers, clients, co-workers and management.
• Willing to work with others and be a team player.
• Must be able and willing to work second shift;
• Have 3+ years CNC Lathe and/or Mill (4th axis machine) experience Fanuc control. On DMG MORI SEIKE, DOOSAN, MAZAK machines, preferred.
• Ability to understand CNC programs, preferred.
• Able to run more than 1 machine at a time.
• Ability to read and interpret engineering drawings and specifications.
• Ability to perform parts inspection, hold drawing tolerances and use measuring tools.
• Provide hands-on manufacturing expertise for machined products.
• Studies blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished workpiece, sequence of operations, and setup requirements.
• Ensure correct material type and size used.
• Verifies conformance of finished workpiece to specifications, using measuring and inspection tools as necessary.
• Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines as necessary to machine parts as required.
• Starts and observes machine operation to detect malfunctions or out-of-tolerance machining and adjusts machine controls or control media as required.
• Sets up and operates machine on trial run to verify accuracy of machine settings or programmed control data.
• Performs routine maintenance tasks on machines as required.
• Maintains cohesion among work shifts by documenting and communicating actions, irregularities, and continuing needs.
• Documents actions by completing production and quality logs.
• Maintain a clean and organized work area and maintain equipment, to keep a nice appearance.
• Ability to solve practical problems
• Maintain a clean work environment - general housekeeping

EDUCATION AND EXPERIENCE:

• High School Diploma or GED
• You must be 18 years or older
• Must be able to pass background and drug test
• Oilfield/manufacturing experience preferred

NO HEADHUNTERS/RECRUITERS/STAFFING AGENCIES

AMVAC is seeking a detail-oriented and proactive Human Resources Coordinator to provide comprehensive on-site HR support at our Axis, Alabama manufacturing facility. This fully on-site role plays a critical part in managing key employee lifecycle processes, ensuring confidentiality, and supporting HR operations in a dynamic, fast-paced industrial environment.

AMVAC, an American Vanguard Company is a leading innovator in the agricultural sector, committed to delivering high-quality solutions that enhance crop protection and yield.

Key Responsibilities:

Employee Lifecycle Management

• Coordinate and facilitate onboarding, orientation, and offboarding processes
• Ensure compliance with federal, state, and site-specific employment regulations and documentation requirements

Payroll Administration

• Support bi-weekly payroll processing using ADP Workforce Now
• Audit timecards, maintain accurate employee data, and resolve payroll discrepancies

Recruitment Support

• Post job openings on various platforms via ADP & LinkedIn
• Manage applicant tracking, coordinate interviews, and pre-employment screenings

HRIS & Reporting

• Maintain accurate and up-to-date employee records in the HRIS system
• Generate and analyze HR reports (e.g., headcount, turnover, overtime, etc.)
• Support internal and external audits; and employee requests

Qualifications / Requirements:

Education:

• Bachelor’s degree preferred (Human Resources, Business Administration, or a related field)
• HS Diploma or equivalent required

Experience:

• 2+ years of HR experience, preferably in a manufacturing or industrial environment
• Proficiency in Microsoft Office Suite and HRIS platforms such as ADP Workforce Now

Skills & Competencies:

• Highly organized with attention to detail
• Excellent communication skills (verbal and written)
• Commitment to confidentiality and following required regulations
• Ability to manage multiple priorities and meet deadlines in a fast-paced setting
• Solid problem-solving and analytical skills
• Project management experience with demonstrated experience meeting deadlines
• Collaborative, customer-focused, and tech-savvy mindset
• Working knowledge of employment laws and compliance standards (e.g., EEO, FMLA, I-9, GDPR).

AMVAC's Exceptional Benefits include:

• Health insurance including Medical (PPO), Dental, Vision with low out-of-pocket costs
• Life Insurance (company paid); Disability insurance
• Health Savings Account (HSA) / Flexible Spending Account (FSA) options available
• 401(k) Retirement Savings Plan with employer matching
• Employee Stock Purchasing Plan (ESPP) with employee discount (NYSE: AVD)

If you are an HR Professional looking for an exciting opportunity where you can contribute to the company's success on a daily basis, we want to hear from you!

We are an equal opportunity employer and value diversity in our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Plan machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T).

Manage stock inventory by checking stock to determine amount available; anticipating needed stock; placing and expediting orders for stock; verifying receipt of stock.

Program and operate CNC/Manual mills and lathes by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs.

Set up CNC/Manual mills and lathes by installing and adjusting chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices; tramming heads.

Verify settings by measuring positions, first-run part, and sample workpieces.

Maintain specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes.

Ensure safe operations by adhering to safety procedures and regulations.

Maintain equipment by completing preventive maintenance requirements; following manufacturer’s instructions; troubleshooting malfunctions.

Proficiency with software applications including CAD - CATIA preferred, Microsoft Excel, Word & PowerPoint.

CNC Programmer/Machinist Responsibilities:

Write and optimize CNC programs to create complex parts on 3 and 5 axis machining centers.

Design and fixture complicated setups on manual and CNC machines.

Calculate speeds and feeds for multiple materials.

Read and understand drawings.

Create and compile necessary documents to aid setting up machines.

Working knowledge of the following machines: Mill (manual and CNC), Lathe (manual and CNC), Saws.

Select tooling for specific applications.

Machine parts to print and/or other special requirements.

Utilize measurement equipment to qualify completed parts.

Requirements:

Minimum 5+ years experience writing CNC programs in a machining environment.

Demonstrates proficiency with CAD (CATIA), CAM software and G-code.

Experience with any CAD System, not limited to CATIA only: Mastercam, GibbsCam is acceptable.

Experience in using Vericut is a plus.

Proficient with GD&T.

Manual and CNC operator experience required.

Demonstrates strong time management skills with the ability to effectively coordinate multiple projects.

Experience writing post processors is a plus.

Knowledge of Microsoft Office Tools: Excel, Power Point

CMM Programmer

Springdale, OH

Onsite

Full Time

Responsibilities:

The Process Engineer will be responsible for programming Coordinate Measuring Machines (CMM) to support the manufacturing efforts. The CMM programming will be done using PC DMIS software. The role will include writing, editing, troubleshooting, and validating CMM programs to be used for measurement of jet engine components. The Process Engineer develops, enhances, and troubleshoots CMM programs for dimensional inspection of manufactured aerospace products. The Process Engineer must be able to read and interpret drawings and prints using Geometric Dimensioning and Tolerancing (GD&T) principals.

Duties and Responsibilities:

• Develop CMM programs using PC DMIS software, an advanced level of PC DMIS offline programming is expected.
• Read and understand prints/drawings and have an advanced knowledge of GD&T.
• Develop planning, processes, and work instructions
• Troubleshoot & prove-out CMM/ PC DMIS programs, direct GR&R validations, and validate work using multiple techniques
• Develop CAD based CMM inspection programs using both models and prints
• Work autonomously as well as collaboratively in identifying needs and validation plans. Providing proactive support to meet manufacturing requirements
• Follow system standards to development, implementation, and change management of metrology processes

Qualifications / Requirements:

• US citizenship required
• Approximately 20% travel time
• Advanced knowledge/experience programming CMM’s using PC DMIS software with scanning, offline programming, and complex geometry.
• Advanced knowledge/experience programming CMM’s using PC DMIS software with an emphasis on precision, repeatability and reproducibility
• Strong experience using, programming, troubleshooting, and editing PC DMIS programs.
• Experience using 5-axis REVO probe systems.
• Strong knowledge of GD&T and how to apply GD&T to inspection routines to satisfy print dimensions
• Strong mathematical, analytical, writing, and communication skills
• Knowledge and experience with CAD-based inspection using PC DMIS
• Strong collaboration & presentation skills to gain buy-in & effectively communicate program/process implementations and changes to the organization

Desired Characteristics:

• Programming or scripting experience (C++, C Sharp, Python, etc.)
• Self-starter – quick learner & able to identify alternative solutions for optimum results
• Experience in application of structured problem solving in continuous improvement