Dsm Axis Examples Jobs in Usa

At a Glance

Company: Karl Storz
Location: Franklin, MA (On-site)
Job Type: Full-Time
Pay Range: $33.56 – $43.56 per hour (DOE)
Shift: Day Shift | Monday – Friday
Overtime: As Needed
Experience Level: Senior (5+ years machining/programming experience)
Industry: Medical Device Manufacturing
Apply: Directly through hireCNC

---

Why This Role Exists

This role exists to support new product development, process optimization, and ongoing production needs in a high-precision medical manufacturing environment.

At Karl Storz, this position plays a critical role in creating CNC programs, processes, tooling strategies, and fabrication documentation for complex surgical components — ensuring quality, repeatability, and manufacturability at scale.

---

The Work You’ll Be Doing

In this role, you will:

• 
  
• Develop and optimize CNC programs using Esprit CAM
  
• Create machining processes, tooling packages, and setup documentation
  
• Support new product launches through process validation and verification
  
• Review drawings for manufacturability and cost reduction opportunities
  
• Troubleshoot machining issues and implement corrective actions
  
• Support MRB activities and continuous improvement initiatives
  
• Lead programming improvements tied to Lean manufacturing (SMED, Poka-Yoke)
  
• Collaborate with engineering, quality, and production teams across shifts
  
• Ensure compliance with ISO 13485, ISO 9001, and FDA QSR requirements
  

---

Machines, Controls & Software

Machines: Multi-axis mills, Swiss-style lathes, mill-turn equipment
CAM Software: Esprit
CAD Software: SolidWorks
Controls: Fanuc-style environments common in Swiss and mill-turn systems
Inspection & Quality Tools: SPC methods, GD&T-driven inspection

---

Materials You’ll Work With

• 
  
• Stainless Steel
  
• Nitinol
  
• Nickel Alloys
  
• Other medical-grade metals
  

---

What We’re Looking ForRequired:

• 
  
• 5+ years of machining or CNC programming experience
  
• Strong CNC machining background including setups and tooling strategy
  
• Proficiency with Esprit CAM or similar multi-axis programming software
  
• Ability to read and interpret complex blueprints and GD&T
  
• Experience optimizing cycles, processes, and manufacturability
  
• Strong troubleshooting and problem-solving skills
  
• Excellent communication and documentation ability
  

Preferred:

• 
  
• Experience with Swiss-turn or mill-turn equipment
  
• Fixture and tooling design experience
  
• SPC knowledge
  
• SAP experience
  
• Medical device or regulated manufacturing experience
  

---

Why Machinists & Programmers Like Working Here

Professionals choose Karl Storz because:

• 
  
• Clean, modern, climate-controlled facility
  
• High-end multi-axis equipment
  
• Stable workload in medical manufacturing
  
• Competitive pay and strong benefits
  
• Tuition reimbursement (up to $5,250/year)
  
• 401(k) with 60% match on first 6%
  
• 3 weeks vacation + 11 paid holidays
  
• Up to 8 weeks fully paid parental leave
  
• Real impact — components used in life-saving medical devices
  

---

Pay, Benefits & Schedule

Pay Range: $33.56 – $43.56/hr (based on experience)

Benefits Include:

• 
  
• Medical, dental, vision
  
• 401(k) with company match
  
• PTO + paid holidays
  
• Tuition reimbursement
  
• Parental leave
  
• Life, STD/LTD insurance
  
• Flexible Spending Accounts
  
• Wellness and fitness reimbursement
  
• Pet insurance options
  

Schedule:
Day Shift | Monday – Friday

Overtime: As needed

---

Apply

Interested CNC programmers can apply directly through hireCNC.

Apply Now or Save This Job to come back later.

5-Axis CNC Machinist / Programmer

Colorado Springs, CO

$40–48/hr | 1st Shift | Overtime Available

ISO Certified Environment

We are hiring an experienced 5-Axis CNC Machinist / Programmer to join a well-established, ISO-certified machine shop in Colorado Springs.

This is a technically driven shop focused on precision machining, tight tolerances, and high-quality standards. We’re looking for someone confident programming complex 5-axis parts and taking ownership of their work from start to finish.

What You’ll Do:

• Program 5-axis mills (any CAM background welcome)

• Fusion 360 experience is a plus (primary software used)

• Set up and run your own jobs

• Optimize programs and improve cycle times

• Work in a structured, quality-driven ISO environment

What We’re Looking For:

• Strong 5-axis programming experience

• Ability to take parts from print → program → setup → production

• Comfortable reading blueprints & working with tight tolerances

• Experience in an ISO-certified or quality-driven shop preferred

What’s Offered:

• $40–48/hr depending on experience

• 1st shift schedule

• Overtime opportunities

• Stable, long-term opportunity

• Clean, organized ISO-certified facility

• Team-oriented, technical environment

If you’re currently programming 5-axis and open to a strong opportunity in Colorado Springs, let’s connect.

Message me directly or apply here.

— Jamal

Lead Recruiter | Industrial Talent Group

Job description:

CNC Swiss Programmer / Lead Setup Technician

Swiss CNC | Multi-Axis | Citizen | Star | Tsugami | Tight Tolerance Machining

Job Summary

We are hiring a skilled CNC Swiss Programmer / Lead Setup Technician to program, set up, and optimize multi-axis Swiss CNC lathes producing tight-tolerance precision components.

This role requires strong experience with Swiss-style CNC machines, G-code programming, blueprint interpretation, and hands-on setup leadership.

Key Responsibilities:

• Program and edit G-code on Swiss CNC machines (Citizen, Star, Tsugami, Hanwha, or similar)
• Perform and lead complex setups on multi-axis Swiss lathes
• Read and interpret blueprints, GD&T, and technical drawings
• Select tooling, adjust offsets, and optimize feeds and speeds
• Troubleshoot machining issues related to tooling, program logic, and material behavior
• Improve cycle times and reduce scrap through process optimization
• Perform first-piece inspections and ensure parts meet tight tolerances
• Support continuous improvement initiatives
• Train and mentor CNC machinists and operators

Required Qualifications:

• 5+ years of Swiss CNC programming experience
• Experience with multi-axis Swiss turning centers
• Strong knowledge of G-code programming
• Advanced blueprint reading and GD&T skills
• Experience machining stainless steel, titanium, aluminum, or specialty alloys
• Proven troubleshooting and setup leadership experience
• Strong understanding of tooling, speeds/feeds, and process optimization
• Ability to work overtime and weekends as needed

Preferred Experience:

• Experience in medical device, aerospace, or high-precision manufacturing
• Experience with bar feeders and automation
• Familiarity with CAM software (Esprit, Mastercam, PartMaker, or similar)

Job Type: Full-time

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Relocation assistance
• Vision insurance

Experience:

• Swiss Machining and Programming: 5 years (Required)

Medical Device Sales Representative Opportunity

Job Summary & Responsibilities:

The Medical Device Sales Representative supports achievement of sales revenue targets and helps to grow market share for a specified territory by promoting, selling and servicing our clients products. Practice good territory management in terms of organization, administration and expense planning. Control and train appropriate medical staff on products and procedures. This is a clinical sale with strong value added focus and an emphasis on improving patient care outcomes. Account responsibility and sales development goals established by the RSD in conjunction with the DSM.

• Traveling to hospitals and clinics operating rooms in the surrounding area.
• Responsible for specified target accounts provided by DSM and RSD.
• Provide forecast for targeted accounts with DSM guidance.
• Prospecting for new customers, driving lead follow-up, and positively positioning our products and services to existing and new clients in the region.
• Identify, establish and maintain productive working relationships with key decision makers, customers and their staff, administrative staff, etc.
• Provide clinical support for DSM (programming, reprogramming, educating clients and patients, case coverage, etc.).
• Build strong relationships with key clients.
• Train and educate customers on the merits and proper clinical usage of company products by giving presentations and demonstrations using appropriate formats and platforms (e.g., slides, manuals, etc.) to keep customers abreast of new and existing products.
• Report on sales process, market conditions, and customer activities to sales leader.
• Utilize internal platforms to ensure flawless execution of product delivery to clients and patients.
• Plan, coordinate and execute local educational and sales events, with the support of other internal resources, intended to augment the business and help to deliver assigned sales goals.
• Other duties as assigned.

Role Requirements:

• Two plus years’ of B2B sales experience.
• Bachelor’s Degree; BS in Biological Science or Business is a plus.
• 1-2 years of medical device sales experience is highly preferred.
• Operating room sales experience is a plus.
• MUST speak Spanish professionally (more than half of the patients speak Spanish).

Skills and Knowledge:

• Possesses high empathy and compassion for patients.
• Demonstrated success in previous sales role; indicating a high level of sales performance.
• Ability to plan, organize, and prioritize own daily work routine to meet region requirements.
• Travel daily within territory.
• Must have a valid driver’s license and active vehicle insurance policy
• Adheres to company policies and conducts all business in an ethical manner
• Computer proficiency.

FUNCTION:

Set up, operate, troubleshoot and perform work on a variety of machinery. Be flexible, willing and capable of being trained on additional machines. Perform work at a consistently high level of quality. Be reliable in consistency of work and willingness to work outside of core area of expertise.

TYPICAL DUTIES:

• 
  
• 
  

  Must be capable & willing to set up operations that have previously been proven out independently without oversight of a leadman or CNC programmer.

  
  
  

• 
  
• 
  

  Must be capable of running a minimum of two of the following machine types: 3 and 4 axis Horizontal and Vertical Machining Centers, 5 axis machining centers, Vertical Turret Lathes, Cylindrical Grinders, Mill/Turn machines, CNC boring machines, Horizontal lathes, manual machines.

  
  
  
• 
  
  

  Must be willing to perform work on machines throughout the shop, not only the machines that are within the person's core area of expertise. For example: must be willing to perform work on a Mitsubishi 4 axis machining center even when the person normally runs a Mazak 730 Variaxis.

  
  
  
• 
  

  Must be capable & willing to identify opportunities for improvement in tooling, cutting methods, mistake proofing & work instruction documentation.

  
  
  
• 
  

  Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action.

  
  
  
• 
  

  Actively participate in various aspects of Continuous Improvement projects which may include but is not limited to 5S, TPM, kaizen events, and set-up reduction events, which is aligned with the commitment to continuous improvement activities in Article II of the collective bargaining agreement.

  
  
  
• 
  

  Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.

  
  
  
• 
  

  Must be capable & willing to assist or train other employees in this or lower classifications as needed.

  
  
  
• 
  
  

  Refer difficulties to leader or supervisor as appropriate

  
  
  

  May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.

  
  
  

This position is currently accepting applications.

Apply Now

FUNCTION:

Set up, operate, troubleshoot and perform work on a variety of machinery. Be flexible, willing and capable of being trained on additional machines. Perform work at a consistently high level of quality. Be reliable in consistency of work and willingness to work outside of core area of expertise.

TYPICAL DUTIES:

• 
  
• 
  

  Must be capable & willing to set up operations that have previously been proven out independently without oversight of a leadman or CNC programmer.

  
  
  

• 
  
• 
  

  Must be capable of running a minimum of two of the following machine types: 3 and 4 axis Horizontal and Vertical Machining Centers, 5 axis machining centers, Vertical Turret Lathes, Cylindrical Grinders, Mill/Turn machines, CNC boring machines, Horizontal lathes, manual machines.

  
  
  
• 
  
  

  Must be willing to perform work on machines throughout the shop, not only the machines that are within the person's core area of expertise. For example: must be willing to perform work on a Mitsubishi 4 axis machining center even when the person normally runs a Mazak 730 Variaxis.

  
  
  
• 
  

  Must be capable & willing to identify opportunities for improvement in tooling, cutting methods, mistake proofing & work instruction documentation.

  
  
  
• 
  

  Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action.

  
  
  
• 
  

  Actively participate in various aspects of Continuous Improvement projects which may include but is not limited to 5S, TPM, kaizen events, and set-up reduction events, which is aligned with the commitment to continuous improvement activities in Article II of the collective bargaining agreement.

  
  
  
• 
  

  Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.

  
  
  
• 
  

  Must be capable & willing to assist or train other employees in this or lower classifications as needed.

  
  
  
• 
  
  

  Refer difficulties to leader or supervisor as appropriate

  
  
  

  May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.

  
  
  

This position is currently accepting applications.

Apply Now

• Set up and run 3-axis, 5-axis, and lathe jobs
• Modify CNC programs to improve efficiency
• Check parts for accuracy and quality compliance
• Assist with machine maintenance and workstation upkeep

• High School Diploma or GED required; technical degree preferred
• Minimum 3 years CNC machining and/or programming experience
• Experience with multi-axis machining and program edits
• Strong print reading, GD&T, and inspection skills

• Health, dental, vision, life and short-term disability insurance
• Company paid life and long-term disability insurance
• 9 paid Holidays annually
• Employee Assistance Program (EAP)
• 401(k) match: 100% of 3% and 50% for 4% and 5%
• Education reimbursement program
• Career advancement opportunities
• Flexible Schedule
• Competitive pay scale
• Paid time off (PTO) starting at 80 hours with annual increase for each year of service

We are an Equal Opportunity Employer, making decisions without regard to race, color, religion, sex, national origin, sexual orientation, gender, gender identity, veteran status, disability, or any other protected class.

EEO is The Law - click here for more information:

We endeavor to make this site accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please contact or email us: . You may also write to us and we will be happy to assist you with the application: Prototek, 205 Pine St., Hopkinton, NH 03229

Responsibilities

• Efficient setup and operation of CNC mills, lathes, and other complex multi-axis (5-axis/6-axis) machining centers to produce component parts in accordance with engineering drawings, internal sketches, or other specifications provided by engineering/USN
• Interpret blueprints, engineering drawings, and work instructions while understanding GD&T requirements
• Select tooling, adjust offsets, and verify machine parameters for complex geometries
• Perform quality checks using micrometers, calipers, gauges, CMM, and other precision instruments
• Perform some follow-up operations, such as deburring, polishing, and grinding
• Maintain safe and clean work environment in compliance with company and DoD standards
• Document production, quality, and maintenance logs
• Collaborate with supervisors, engineers, and fellow machinists to resolve production issues
• Communicate with team members to produce quality parts to specification
• Other duties as assigned within required scope of work

Required Qualifications

• Associate’s degree or CNC Machining Technology certification (2-year program)- Preferred
• High School diploma or GED equivalent
• Able to properly wear PPE (Personal Protective Equipment)
• Able to stand for long periods of time, bend, stoop, lift, reach above shoulders, pull, push, climb up/downstairs
• 1+ years’ experience as a Machinist
• Knowledge of machining fundamentals, G-code, M-code and shop mathematics (Ability to perform basic arithmetic, geometric and algebraic calculations)
• Ability to read and interpret technical drawings and GD&T
• Proficiency with precision inspection tools

The ideal candidate is a proactive Manufacturing Engineer who will own product manufacturing from development through project completion. A successful candidate in this position will be responsible for developing conventional machining processes for engine ran and new power generation turbine components. The position also assists in shop floor execution, perform data analysis to drive process improvement, and interact with Product Engineering departments to address non-conformances and opportunities to improve design manufacturability. Our Manufacturing Engineers are expected to work collaboratively with other Manufacturing Engineers, Fixture Engineers, CMM Programmers, and Set-up Operators on a daily basis in these efforts.

This Manufacturing Engineer position will spend equal time working within establish manufacturing systems creating process documentation for production execution and working on the shop floor to observe and improve processes as well as process execution.

How You’ll Make an Impact (responsibilities)

* Develop and implement manufacturing processes and CNC programs for complex 4- and 5-axis milling of turbine airfoil components.

* Select and design cutting tools, fixturing, and machining strategies to optimize quality, cost, and throughput.

* Provide hands-on shop floor support to machinists, troubleshooting and improving machining and related processes.

* Collaborate with Product Engineering, Quality, and Operations to resolve non-conformances and improve design manufacturability.

* Lead process improvement, development, and qualification projects, including data analysis, DOE, and documentation.

* Support production planning activities such as quality control plans, quoting, tooling inventory, and CAPEX initiatives

What You Bring (requirements)

* Bachelor’s degree in Engineering or equivalent experience; 5+ years of proven 4- or 5-axis milling manufacturing experience.

* Strong knowledge of conventional machining processes for complex turbine components (blades and vanes).

* Proficiency in Siemens NX and Teamcenter CAD/CAM and product data management systems.

* Ability to interpret engineering drawings, GD&T, and manufacturing specifications.

* Experience with CNC programming (online and offline) and fixture design for milling applications.

* Strong analytical, problem-solving, and collaboration skills with experience working in a production environment.

About the Team

"Let’s make tomorrow different today" is our genuine commitment at Siemens Energy to all customers and employees on the way to a sustainable future.

In our Business Unit Generation we offer a broad portfolio of cutting edge technologies, services and solutions for centralized and decentralized energy production.

Siemens Energy in Winston-Salem is the North American manufacturing center of excellence producing Steam Turbine and Gas Turbine rotating blades and stationary vanes. The Manufacturing Engineering department is seeking an experienced and hands-on Manufacturing Engineer for 4- and 5-axis milling applications.

What’s it like to work at Siemens Energy?

[1] Who is Siemens Energy?

At Siemens Energy, we are more than just an energy technology company. We meet the growing energy demand across 90+ countries while ensuring our climate is protected. With more than 92,000 dedicated employees, we not only generate electricity for over 16% of the global community, but we’re also using our technology to help protect people and the environment.

Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.

Our Commitment to Diversity

Lucky for us, we are not all the same. Through diversity we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character - no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences.

Rewards

* Career growth and development opportunities

* Supportive work culture

* Company paid Health and wellness benefits

* Paid Time Off and paid holidays

* 401K savings plan with company match

* Family building benefits

* Parental leave

• * Annual Plant Performance Incentive

Summary:

We are seeking a skilled CNC Mill programmer specializing in Mills to work from supplied documentation to create programs, manufacture one off and prototype components for a multitude of applications across a variety of industries. We have a strong history in the machining market in Seattle with our campus covering over 250,000 square feet of manufacturing space. You will be challenged with exotic metals, prototypes, gears, splines, and other unique projects every day.

Responsibilities:

• Write and/or modify CNC programs and instructions for Mill, and multi-axis / mill-turn machined parts utilizing Siemens NX.
• Ability to write and / or modify programs for weldments, assemblies and billets.
• Analyze job orders, drawings, blueprints, specifications, and design data to determine the appropriate machine tool, work holding and cutter selection.
• Coordinate program start-ups in manufacturing, assist in troubleshooting and provide recommendations for manufacturability.
• Observe machine trial runs or conduct computer simulations to ensure programs and machinery function as needed.

Skills:

• 5 – 10 years CNC Mill programming.
• Previous experience working in a job-shop manufacturing environment.
• Expert hands-on knowledge of CAD/CAM and Siemens NX software operation.
• An expert level of programming prototype / one off components on 3 and 4-axis mills, and multi-axis mill-turn machines.
• Working knowledge of tool path creation, speeds/feeds, cutting tool selection
• Professional approach; collaborating with other team members ensuring accuracy, manufacturability, and continuity.
• High level of competency in all areas of shop math, machine controls, materials, and tooling.

This is an opportunity for you to challenge yourself and get better at what you do every day. It will not be easy but will put you in a position to become a valued member of our team, working on cutting-edge parts and technology. Are we talking about you, apply on-line, or email your resume to or call on 2 send us your resume for consideration.

Diversity and equity are important values for us, and we encourage all qualified applicants to apply, regardless of race, gender, religion, sexual orientation, or disability. Position is subject to export control regulations as defined in 22 CFR 120.62

Industrial Designer and Manufacturer, CAD/CAM – Competitive Salary - Oakwood Village, Ohio

Are you tired of design roles where your work never leaves the screen? Do you want to build real tooling, run the machines, and see the parts you design used in production?

In this role, you will take projects from concept through machining and final inspection. You will strengthen your CAD/CAM skills, gain hands-on CNC experience, and build practical manufacturing knowledge that few design roles offer.

The role

You will design and manufacture foundry patterns, molds, fixtures, and models using CAD/CAM tools such as SolidWorks, Autodesk PowerMILL, or Autodesk Fusion360. Then you will help machine and fabricate those designs using CNC equipment and manual tools.

Because you follow each project from start to finish, you gain a deeper understanding of how designs perform in real manufacturing and how to improve them.

Key Responsibilities

• Each part of your work helps you build valuable technical skills.
• Turn 2D drawings into 3D CAD models and grow your advanced CAD/CAM capability
• Design and manufacture foundry tooling used in casting processes
• Set up and operate 3-axis and 4-axis CNC machining centers and routers to build hands-on machining experience
• Design molds and fixtures used in plastics, polymer, concrete, and ceramic production
• Work with materials such as aluminum, steel, plastics, tooling boards, and wood to expand your fabrication skills

You will also manage multiple projects and see them through design, machining, and inspection. This gives you ownership of your work and practical experience across the full manufacturing process.

About Company

Reliable Pattern Works, Inc. is a leading foundry pattern, tooling, mold, and model manufacturer that services all types of industries nationwide. Our skilled design team will create and manufacture tools from supplied drawings, sample parts, ideas, or CAD files to generate the precise equipment that our customers need to produce quality parts.

The Benefits

• 401(k) retirement plan
• Employer contribution to 401(k)
• Employee health benefits
• 10 paid holidays
• Bereavement pay

The person

You enjoy solving design challenges and seeing your work become real products. You have experience with 3D CAD/CAM and CNC machining and like being involved in the full build process.

• Minimum 2 years’ experience in Solidworks
• Minimum 1 year experience in manufacturing using CNC machines

What’s next

If you want to grow your CAD/CAM and machining skills while taking projects from design to finished tooling, apply today.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for a Numerical Control Tape Laminator Operator to join our Fabrication team in Everett, Washington.

Join our innovative team as a Numerical Control Tape Laminator Operator, where you will independently operate and adjust advanced tape laminator machines, ensuring precise setups and adherence to established shop practices. Your attention to detail will guide you as you prepare materials, verify specifications, and utilize precision measuring instruments to achieve optimal results. You will play a key role in monitoring machine operations, troubleshooting any issues, and performing quality checks to ensure that every part meets stringent standards. Your commitment to safety and proper handling of hazardous materials will contribute to a secure and efficient work environment. If you are passionate about precision manufacturing and thrive in a fast-paced setting, we invite you to be a part of our mission to deliver exceptional aerospace solutions.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Independently operate and adjust numerically controlled Tape Laminator machines according to established shop practices and procedures.

• Prepare for job setup by reviewing production orders, work orders (W/O), and setup documents, ensuring access to blueprints and drawings.

• Verify that the correct materials and tools are issued and free from visible defects before starting work.

• Identify the type of machine setup needed based on drawings and work orders, including flat tape laminating machines and automated fiber placement machines.

• Check machine setups and parts completed by previous operators to ensure safe working conditions and job progress.

• Prepare machines by obtaining materials from storage and performing necessary processes before operation, such as rolling tackifier and laying fiberglass.

• Use precision measuring instruments, such as dial indicators, to align and level the layup table as required.

• Retrieve and download CNC programs to the machine controller from the mainframe server.

• Set machine coordinates and adjust offsets, tool heights, and laser settings using the controller keyboard or pendant.

• Run the machine to lay graphite plies, copper ampe plies, and perform hand trimming and rework as necessary.

• Monitor machine operations for unusual vibrations or sounds, checking gauges and displays for warnings.

• Move finished parts and tools using appropriate material handling equipment as required.

• Handle and dispose of hazardous materials in accordance with safety regulations and using personal protective equipment.

• Perform quality checks after each operation to ensure parts meet specifications and are free from defects.

• Maintain personal and tool certifications, consulting with team leaders and supervisors on process or job-related issues as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ Years of experience using precision measuring tools.

• 1+ Years of experience with multi-axis Numerical Control (NC) machines.

• 1+ Years of experience obtaining and using information from drawings, documents, machine control data, to set up parts or material on pallets for machining operations.

• 1+ Years of experience working with blueprints, specifications, assembly drawings and standard operating procedures.

• Able to stand and walk throughout work shift (6+ hours) as well as carry and lift up to 25 pounds.

Preferred Qualifications:

• 1+ Years of experience operating 3, 4, or 5 axis NC/CNC machine tools.

• Experience working with and around hazardous materials (while using the proper protective equipment).

Conflict of Interest:

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 22, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.