Design Tech Homes Jobs in Usa

If you’re ready to take control of your earning potential and step into a results-driven role where execution matters daily, this opportunity is built for you.

We’re seeking a driven sales professional who creates momentum quickly, follows up with purpose, and confidently closes. This is not a passive sales environment, speed, discipline, and consistency make the difference.

At Design Tech Homes, we don’t sell inventory, we guide buyers through designing and building fully custom homes. This consultative role requires urgency, strong pipeline management, and the ability to move clients from first meeting to signed contract without losing traction.

You’ll own your pipeline and be accountable for outcomes. Our VisionBuilt™ immersive design technology gives you a competitive advantage, but your responsiveness, follow-through, and ability to drive decisions forward determine your success.

You’ll stand out if you:

• Are competitive and motivated by measurable goals
• Act quickly on opportunities and follow up relentlessly
• Perform well under pressure and high expectations
• Lead consultative conversations that convert interest into commitment
• Stay focused and solution-oriented when navigating complexity
• Take full ownership of your numbers and continually raise your standard

Compensation:

Uncapped commission structure with strong six-figure earning potential for high performers. Income scales directly with performance, and momentum matters.

We’re actively interviewing and looking to move quickly. If you’re ready to step into a high-expectation, high-reward sales role, let’s connect.

Copy and paste the link below in your browser to complete our pre-interview assessment and upload your resume. We will not consider your application without this step.

Location & Hours

This position supports build-on-your-lot homebuyers throughout the Houston MSA, at our model homes located in either New Waverly or Willis, Texas. The schedule provides two days off during the week and requires weekends and select holidays.

About the Company

We are partnering with a leading manufacturing who will be is looking to bring on a Director of Product Design – Soft Home Textiles

About the Role

This role will lead the creative vision and end-to-end development of trend-forward fashion home accessories, including pillows, throws, blankets, and related accent pieces. The Director will blend design leadership, trend intelligence, textile expertise, and cross-functional collaboration to deliver cohesive, commercially relevant assortments.

Responsibilities

• Own the overall design direction and aesthetic for soft home décor categories (pillows, throws, blankets, decorative textiles, and accessories).
• Create seasonal collections that are trend-right, cohesive, elevated, and aligned with target consumer lifestyles and value expectations.
• Continuously research the market through trade shows, retail inspiration trips, cultural events, and global trend hubs to inform fresh design perspectives.
• Lead trend forecasting and storytelling; translate macro trends into clear seasonal concepts, color stories, print direction, and material choices.
• Apply strong color theory and textile knowledge to build compelling palettes and surface designs.
• Oversee the full product design workflow from concept and sketch through material selection, specifications, and tech pack creation.

• Functional Collaboration
• Partner closely with merchandising and global product development to ensure designs align with line plans, margin goals, and quality standards.
• Provide clear creative direction, actionable feedback, and timely approvals across all stages of development.
• Collaborate with packaging, marketing, and visual teams to ensure design intent is reflected across storytelling, in-store presentation, and digital content.
• Communicate information and decisions promptly to keep calendars on track and avoid production delays.
• Maintain high standards for accuracy, detail, and consistency across all design deliverables.

• Deliver polished, visually compelling presentations that inspire executives, internal partners, and external retail customers.
• Anticipate challenges and proactively develop creative and practical solutions.
• Model a proactive, forward-thinking mindset with a strong sense of ownership and follow-through.
• Embrace clear, direct feedback and quickly integrate changes to strengthen outcomes.
• Stay informed on the competitive landscape, consumer behavior, and broader home décor market dynamics.

• Proficient in industry-standard design tools/software for concepting, rendering, and tech pack creation.
• Deep understanding of color theory, woven and knit construction, and a variety of textile bases relevant to soft home.
• Ability to translate inspiration—from runway, interiors, art, and culture—into original and commercially viable soft home products.
• Strong presentation skills to clearly articulate design vision to cross-functional partners, global teams, and retail buyers.

Qualifications

• Bachelor’s or Master’s degree in Product Design, Textile Design, Industrial Design, Home Textile experience
• 10+ years of progressive product design experience in soft home goods, home textiles, and/or decorative accessories, including leadership responsibility.
• Must Have worked with mass retailers
• Robust knowledge of textiles, fabrication techniques, trims, embroidery, printing methods, and finishing processes for home décor.
• Proven leadership, communication, and project management skills in a fast-paced, calendar-driven environment.
• Strategic thinker with a refined aesthetic eye and strong consumer-first design sensibility.
• Experience shaping design direction for national retail brands or lifestyle-driven companies.
• Familiarity with sustainability considerations in materials, processes, and product design for home.

Contract: 3-6 month potential can lead to Fulltime.

Want to make extra money on YOUR schedule? Join our exclusive list of research study participants and start earning extra income today! Perfect for anyone seeking remote, part-time, or temporary work, these opportunities require no previous experience and offer unmatched flexibility. Choose the studies that suit you best—whether online, in-person, or over the phone—and get paid for sharing your opinions. Don't miss out on this chance to turn your free time into valuable earnings! Sign up now and take control of your work-life balance.

• Health Issues (Research for cures and new medications to treat ailments)
• Consumer Products (Your experience with consumer products)
• Shopping (Shopping experiences)
• Internet Usage (How you use the internet)
• Vehicles (recreational vehicles and automobiles)
• Employment (Various types of jobs or career fields)
• Food & Beverages (the consumption of various foods and bevera ges)
• Entertainment (About TV, movies or video games)
• Social Media (the use of different social media platforms)
• Financial (Banking and investing)
• Retirement (Planning what, when and how)
• Gender (studies based on your gender)
• Housing (Renters or Homeowners)

• Earn up to $250+ in Just ONE Hour! (Focus Group Session)
• Earn up to $3,000+ (Multi-Session Studies)

• Flexibility to take part in discussions online or in-person.
• No commute needed if you choose to work from home.
• No minimum hours. You can do this part-time or full-time
• Enjoy free samples from our sponsors and partners in exchange for your honest feedback of their products.
• You get to review and use new products or services before they are launched to the public.

• Speak and/or read English
• Must be 18yrs old or older
• Must have either a phone, computer or tablet with internet connection

• Start Immediately - No Experience Needed! Anyone Can Participate!

• Open to all education levels - Your opinion matters!

Overview

Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.

About Georgia Tech

Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nations top 20 universities for research and development spending and No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values

Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:

1. Students are our top priority.
2. We strive for excellence.
3. We thrive on diversity.
4. We celebrate collaboration.
5. We champion innovation.
6. We safeguard freedom of inquiry and expression.
7. We nurture the wellbeing of our community.
8. We act ethically.
9. We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

About The School of Architecture

The School of Architecture is one of five schools in the College of Design. Other schools include The School of Industrial Design, The School of Building Construction, The School of City and Regional Planning, and The School of Music Technology. The SoA offers Bachelor of Science in Architecture, Master of Architecture, Master of Science in Architecture, Master of Science in Urban Design, and a Ph.D. degree in Architecture.

Atlanta, GA

The Georgia Institute of Technologys School of Architecture invites applications for a tenure-track appointment at Associate or Full Professor in the School of Architecture in the area of Architecture and Design Computing. The successful candidate will: First, lead the development of research agendas in this area; second, serve as steward for the Eastman Fund to support doctoral students; and third, work with the School Chair and the Dean in order to reshape the mission of the Digital Building Lab (DBL).

The DBL was created by professor Chuck Eastman to address design computation, data standards and interoperability. Over the years it has housed studies in design and construction automation; project delivery systems; and smart buildings, infrastructure and environments, often working in conjunction with the Digital Fabrication Lab which provides a setting for design-build projects for the faculty and the students. The DBL has also fostered collaborations between the faculty of the School of Architecture, the School of Building Construction and the School of Industrial Design, as well as collaborations with the research labs of the faculty including the Shape Computation Lab (SCL) and the High Performance Buildings Lab. Under professor Chuck Eastman, funding came from both successful research applications and from industry memberships. The partnerships with industry fostered and sustained a link between academic research and advances in practice as well as in research internal to major architecture firms. Now is the time to redefine and revitalize the vision and the mission of the lab, taking into account current developments in artificial intelligence, data-based design decisions, and advanced digital modeling of buildings and their performance.

The responsibilities of the successful candidate include securing and conducting funded research, stewarding the future identity and growth of DBL, mentoring early career researchers, advising PhD students, leading the development of forward-looking curricula for the MS Arch and PhD programs, and teaching advanced graduate courses in candidate's area of expertise.

Candidate must have a terminal professional degree in Architecture or an allied discipline.

A strong record of publications on architectural and design computation and/or the development of digital technologies applicable to building design and construction; and a strong track record of sponsored research, industry collaboration, and teaching. A Doctoral Degree is preferred. An interest and ability to relate research to studio teaching is welcome but studio teaching is not a requirement for this position.

Student Success Criteria

• The ability to promote a welcoming educational/work environment.
• The ability to design and teach curricula that are responsive to a distinct student body.
• The ability to engage students in experiential learning activities and pedagogy that support student success.
• The ability to engage in high-impact practices that support deep learning for student success.

Applicants should submit a letter of application, curriculum vitae, a statement of research interests (2-page max), a description of teaching interests (1 page), as well as a portfolio of research work and examples of teaching and the names and contact information for at least three references.

Daniel Baerlecken,

The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The University is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and University policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of race, ethnicity, ancestry, color, religion, sex (including pregnancy), sexual orientation, gender identity, gender expression, national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. This prohibition applies to faculty, staff, students, and all other members of the Georgia Tech community, including affiliates, invitees, and guests. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

More information on these policies can be found here: policymanual/section6/c2714 Board of Regents Policy Manual | University System of Georgia ( ).

January 15: Search committee begins the review of applications.

February-March: Interview process. In the event that there is not a good fit between the strongest applicants and the requirements of the School, the search will be extended.

The candidate of choice will be required to pass a pre-employment background screening. employment/pre-employment-screening

Overview

Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.

About Georgia Tech

Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values

Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:

1. Students are our top priority.

2. We strive for excellence.

3. We thrive on diversity.

4. We celebrate collaboration.

5. We champion innovation.

6. We safeguard freedom of inquiry and expression.

7. We nurture the wellbeing of our community.

8. We act ethically.

9. We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

About the Wallace H. Coulter Department of Biomedicalat the Georgia Institute of Technology and Emory University

The Wallace H. Coulter Department of Biomedical Engineering at Georgia Tech and Emory University has a student body of 1,200 undergraduates, 260 graduate students, and 70 primary and 73 program faculty. In 2023 US News Graduate Program Rankings placed the department as the #1 ranked department in BME in the United States and our Undergraduate Program as the # 2 department in the United States. Since its beginning, the unique partnership between two of the nation's leading public and private entities has been an innovation engine for research and education. Combining the engineering and medical strengths at Georgia Tech and Emory, we are focused on solving some of the toughest problems facing our state, the nation, and the world.

Atlanta, GA

The Kwong lab in the Wallace H. Coulter Department of Biomedical Engineering at the Georgia Institute of Technology invites applications for a Postdoctoral Fellow position in Laboratory for Synthetic Immunity focused on PAR T cell design.

The Laboratory for Synthetic Immunity (LSI) is an interdisciplinary research group in the Department of Biomedical Engineering at Georgia Tech & Emory School of Medicine. Founded in 2014 by Director Dr. Gabe Kwong, the mission of LSI is to pioneer the next wave of immunotherapies and diagnostics to intercept diseases at an early stage and develop treatments that drive deep responses to meaningfully improve patient outcomes.

We are currently seeking exceptional individuals to join our research group as a Postdoctoral Fellow. The successful candidate will be a motivated and creative individual that will pioneer new categories of immune biosensors that leverage design principles from synthetic biology and cell engineering for early cancer detection. They will take a lead role in experimental design, execution of experiments, and interpretation of results to achieve the major objectives of the project.

The successful candidate will thrive on teamwork and collaboration. They will embrace a fast-paced environment and work closely with lab members to cultivate a positive and inclusive environment. This is a unique opportunity to join a well-funded research group with a track-record of academic excellence, breakthrough innovation and technology translation!

Work closely with the director and lab members in experimental design, bench and animal studies with a focus in PAR T Cell design:

• Play a lead role in regular internal project meetings and data reviews.
• Provide research expertise to aid lab trainees including, graduate students, and undergraduates
• Work with the lab director and university officials in grant administration, project budgets, and scientific reporting.
• Play a lead role in drafting manuscripts and grant applications

PhD in Biomedical Engineering or related field

• Ph.D. in Biomedical Engineering, Bioengineering, Immunology, or related fields with deep expertise in cancer immunology and/or biosensors.
• Expertise in the design and testing of sense-and-respond biocircuits for cancer therapy or diagnostics.
• Proficiency in cell and molecular biology techniques including sterile technique, cell culture, chromatography, electrophoresis, and flow cytometry.
• Proficiency in animal studies including live animal imaging, animal handling and drug administration, necropsy and cell isolation.
• Skilled in molecular cloning, lentivirus production, T cell transduction, protein production and purification.
• Experience with T cell isolation, tumor inoculation; isolation, and dissociation of mouse tumor xenografts.
• Experience with qPCR, next-generation sequencing (NGS) library preparation, NGS data analysis is plus.
• Proficiency with statistical software like SPSS and/or GraphPad Prism.
• Excellent organizational, communication, time-management, and collaboration skills are required.
• Demonstrated desire to mentor graduate and/or undergraduate students.
  
  

• CV/Resume
• Cover letter

Dr. Gabe Kwong, Associate Professor, Wallace H. Coulter Distinguished Faculty Fellow .

The candidate of choice will be required to pass a pre-employment background screening. employment/pre-employment-screening

The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The University is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and University policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of race, ethnicity, ancestry, color, religion, sex (including pregnancy), sexual orientation, gender identity, gender expression, national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. This prohibition applies to faculty, staff, students, and all other members of the Georgia Tech community, including affiliates, invitees, and guests. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

More information on these policies can be found here: policymanual/section6/c2714 Board of Regents Policy Manual | University System of Georgia ( ).

Duration: 6 months

Job Description:

• We are seeking a Digital Accessibility Product Design Specialist with deep expertise in digital accessibility to support product design teams in creating inclusive digital experiences.
• This role focuses on embedding accessibility into the design phase of product development, ensuring accessibility considerations are integrated early in the UX lifecycle. The specialist will partner closely with UX designers to review designs, guide accessible interaction patterns, and help prevent accessibility issues before development begins.
• The ideal candidate will have a strong background in Product or UX Design and later specialized in accessibility, with hands-on experience applying accessibility standards, assistive technologies, and inclusive design practices across modern digital products.
• This is a design-focused accessibility role that emphasizes guiding accessible UX patterns during the design process rather than accessibility testing or engineering remediation.

Responsibilities:

Accessibility Design Integration

• Partner with UX and product design teams to incorporate accessibility best practices during the design and concept stages of product development.
• Review UX designs, wireframes, and interaction patterns to ensure accessibility considerations are addressed early.
• Guide designers on accessible interaction patterns, UI components, and inclusive user flows.
• Identify potential accessibility barriers during design reviews and recommend improvements.

Accessible UX Guidance

• Provide expertise on inclusive design principles and accessible UX patterns.
• Ensure proper color contrast, typography, spacing, focus states, and keyboard accessibility in digital interfaces.
• Support designers in building accessible components and patterns within design systems.
• Evaluate design prototypes and user flows for accessibility risks before development.
• Use assistive technologies and accessibility tools to validate design decisions.
• Provide guidance on designing for users relying on screen readers, keyboard navigation, and other assistive technologies.

Experience:

• 5+ years of experience in Product Design, Interaction Design, or UX Design.
• Minimum 4+ years of dedicated experience working in digital accessibility.
• Strong knowledge of accessibility standards including Web Content Accessibility Guidelines 2.1 / 2.2.
• Hands-on familiarity with assistive technologies including:
• JAWS
• NVDA
• VoiceOver
• TalkBack
• Experience guiding designers on accessible UX patterns and inclusive interaction design.
• Hands-on experience using assistive technologies to validate accessibility considerations.
• Experience identifying accessibility issues during the design phase of product development.
• Proficiency with design and collaboration tools including:
• Figma
• Jira or Atlassian
• Experience testing accessibility elements such as:
• Screen reader compatibility
• Keyboard navigation and focus management
• Color contrast and visual accessibility
• Assistive technology usability

Skills:

• Visual accessibility
• WCAG 2.1/2.2 AAA
• UX Patterns

Education:

• Bachelor’s degree or equivalent experience.

About US Tech Solutions:

US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Recruiter Details:

Name: Deepak

Email:

Internal Id: 26-04491

About Georgia Tech

Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values

Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:

1. Students are our top priority.

2. We strive for excellence.

3. We thrive on diversity.

4. We celebrate collaboration.

5. We champion innovation.

6. We safeguard freedom of inquiry and expression.

7. We nurture the wellbeing of our community.

8. We act ethically.

9. We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

Responsible for performing various functions to keep Georgia Tech's dining program commercial kitchens running smoothly. Primarily responsible for maintaining, modifying, troubleshooting, and repairing a large inventory of electric, gas and refrigeration commercial food service equipment and appliances. This position will interact on a regular basis with: This position will interact on a regular basis primarily with staff and vendors associated with Tech Dining. This position typically will advise and counsel: This position will primarily advise and counsel dining staff and other facilities personnel.This position will supervise: NA

Job Duty 1 -
Perform preventative maintenance on food service and refrigeration equipment as well as scheduled predictive maintenance checks following manufacturers' recommendation and/or as assigned by the supervisor.

Job Duty 2 -
Carry out installations of new equipment.

Job Duty 3 -
Perform repairs and maintenance duties on a wide variety of food service and refrigeration equipment such as walk-in freezers, industrial-sized steam cookers, refrigerators, ice machines, dishwashers, fryers, stoves, ovens, and grills.

Job Duty 4 -
Carry out periodic inspection, cleaning, and equipment servicing.

Job Duty 5 -
Interpret equipment manuals for proper training, care, and maintenance of equipment.

Job Duty 6 -
Attend quickly to emergency calls on equipment repair issues, as well as to after-hour work calls.

Job Duty 7 -
Perform other related duties as assigned.

Educational Requirements
High School Diploma/GED or Vocational School Diploma.

Required Experience
Three to four years of job-related experience.

Additional Preferred Qualifications
Current ServSafe Certification

Preferred Experience
Three or more years of job-related experience a plus.

$17.98 - $24.45 Per Hour

ABILITIES
Requires basic knowledge of refrigeration equipment, commercial ovens, commercial dishwashers, and commercial ice machines.

KNOWLEDGE
Requires basic knowledge of refrigeration equipment, commercial ovens, commercial dishwashers, and commercial ice machines.

SKILLS
This job requires the ability to read instruction manuals for specialty equipment and apply instructions to equipment on hand.

The University System of Georgia is comprised of our 25 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia ("USG") and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individual's race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

This is not a supervisory position.
This position does not have any financial responsibilities.
This position will not be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel
This position does not require security clearance.

Successful candidate must be able to pass a background check. Please visit employment/pre-employment-screening

Spectra Tech has an immediate need for Specialty Mechanical Designers in Oak Ridge, TN.

Education/Experience: 2-10 years experience with parametric 3D CAD, with a strong preference for Creo. An associates degree in a technical field is required.

LUXE Interiors + Design is the definitive voice of the luxury residential design industry. For more than 20 years, we’ve served as a trusted bridge between brands, design professionals and the most affluent homeowners in America’s premier markets.

We tell stories that inspire, spark meaningful relationships and connect the design community—from local visionaries to national icons. We deliver compelling multimedia content and immersive experiences that elevate brands across the luxury design landscape. We don’t just showcase beautiful homes; we transform inspiration into thoughtful brand moments that drive lasting impact.

Role Overview

We are hiring a Homes Editor that will be responsible for cultivating and expanding Chicago's network of luxury interior designers and architects, developing strong, long-term relationships that bring top-tier talent into LUXE’s ecosystem. This role involves sourcing, acquiring, and shaping compelling home features for each market’s six annual issues. Success requires proactive research, on-the-ground scouting, and long-lead project planning, all grounded in trusted partnerships with design professionals. The ideal candidate is deeply connected, highly motivated, and passionate about high-end residential design.

The Homes Editor reports to the Editor-in-Chief and works closely with the Managing Editor to coordinate day-to-day priorities, project timelines, assignments, and deadlines. Regular check-ins ensure smooth execution from feature conception through publication.

Key Responsibilities

• Source, acquire, and develop high-quality home features for print and digital publication
• Write feature stories on a monthly basis and contribute Front of Book content as needed
• Represent LUXE at regional design events and host gatherings to strengthen brand engagement
• Assign, manage, and edit freelance writers, including oversight of contracts and deadlines
• Edit, fact-check, and compile resources, captions, and supporting materials for stories
• Collaborate with Managing Editor during production through Edit Reads and review cycles
• Cultivate strong professional relationships with architects, designers, builders, and publicists
• Maintain an up-to-date database of design professionals and future prospects
• Distribute feature PDFs promptly after publication
• Support digital content initiatives and other editorial projects as assigned

Who You Are

• A proactive, self-starting editor with strong journalistic instincts
• Passionate and knowledgeable about high-end residential design
• Highly organized, able to manage multiple stories and projects simultaneously
• Excellent writer, editor, and communicator
• Collaborative team player who also thrives independently
• Deadline-driven, detail-oriented, and meticulous in project execution

Qualifications

• 5+ years of relevant experience in journalism, editorial, PR, or related fields
• Exceptional writing and editing skills
• Strong understanding of interior design and luxury residential markets
• Proven ability to build and maintain professional relationships with designers and architects
• Comfortable working in both team-based and independent environments

This role is 30 hours per week with the ability and willingness to attend evening events, as required.

About the Company

We are a flourishing residential and commercial flooring team eager to find our next Retail Flooring Specialist who will embrace our values and deliver exceptional customer care. Family values are important to us and we value our coworkers as family. While construction and construction-related customer service can be trying at times, we strive to operate in a relaxed and somewhat casual environment where Whitt Carpet One Floor & Home serves as our safe haven. We work as a team, always willing to help one another. We offer enhanced training on products, installation, and customer service through our relationships with vendors/manufacturers and with access to a world class online university from CCA Global.

About the Role

Our Retail Flooring & Design Specialists offer exceptional design skills combined with extensive product knowledge to assist clients through the process of securing the perfect flooring for their home. Whether that interaction occurs in our showroom or in their home, the objective is always to provide helpful assistance to make the customers' buying decision easier.

Responsibilities

• Provide outstanding customer service
• Greet customers in the showroom and help them determine the best floor for their needs and wants
• Assist customers with their flooring choice through decorating and design advice
• Provide exceptional communication from point of sale thru completion of installation
• Ability to Schedule appointments and drive to customers’ homes for measurements/sample drop-offs, etc.
• Ability to Measure rooms and sketch layouts for customers’ projects
• Calculate estimates and present to clients
• Write sales orders and process the necessary paperwork for the orders
• Build client relationships – create customers for LIFE!
• Ask clients for referrals and online reviews
• Develop and drive new business by means of networking events such as those held by the local chambers of commerce and home builder association
• Report daily inbound web/showroom/phone traffic, home visits, quotes, and sales
• Maintain showroom readiness
• Stay current with product knowledge and warranties
• Work a pre-determined schedule, including every other Saturday and rotating holidays
• Receive payments and stay up to date with Carpet One’s financing program

Qualifications

• Associate degree or higher in Interior Design or Business Administration/Management is preferred
• 4 years Inside/Outside Sales is preferred
• 2 years Interior Design is preferred
• 2 years Customer Service is required

Required Skills

• A history of demonstrated success in assisting customers through the selling process – preferably in flooring/interior finishes
• A passion for developing and maintaining lifelong client relationships
• An enthusiasm for design, decorating, and creating a space that clients will fall in love with (and post on social media)
• Ability and desire to learn our operating system including mobile components
• Willingness to complete our product and sales training to become a Carpet One Five Diamond Certified Floor & Home Consultant
• Proficiency in Microsoft Office, Android, and Apple iOS systems
• Display high energy with a positive attitude and desire to exceed expectations
• Excellent oral, written, and interpersonal communication skills
• Professionalism, to include dependability, accountability, punctuality, organization, and planning

Pay Range & Compensation:

Retail Flooring & Design Specialists can achieve $60,000–$75,000 OTE, driven by sales performance, with no cap on earnings.

Equal Opportunity Statement

We are committed to diversity and inclusivity.

Job Title: Sr. Principal Electrical Design Engineer

Job Family:  Electrical Design Engineering

Organization : Data Center Infrastructure Team

Location:  Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

Jabil has an exciting opportunity for a highly experienced and technically proficient Principal Electrical Engineer to engage in the design, fabrication, and integration of electrical systems for data center power and cooling products, as well as factory enablement projects. This role includes full-stack electrical design from generator systems to AI rack integration zones, with a focus on PDUs, UPS systems, MV/HV power distribution, phased power infrastructure, and controls architecture. The ideal candidate will bring deep technical expertise and a passion for delivering scalable, reliable, and compliant infrastructure solutions.

The Sr. Principal Electrical Integration Engineer will manage and oversee the electrical systems essential for the data center, energy storage systems, and HVAC applications. This role will involve developing specifications, selecting key components, routing wires and cables, establishing connections, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

Product & System Design :

• Knowledge of high-efficiency power conversion and point-of-load regulation for AI/ML server racks (BBU, rPDU).
• Understanding of rack power zoning, load balancing, and redundancy strategies for tiered compute workloads.
• Ensure electrical systems are properly integrated into fabricated enclosures and structural assemblies.
• Lead the electrical design and integration of UPS systems, power conversion units, and safety interlocks.
• Develop and maintain single-line and three-line diagrams for power distribution systems, ensuring clarity, accuracy, and compliance with NEC, IEEE, and UL standards.
• Design and validate three-phase power systems, including load balancing, fault protection, and redundancy strategies for high-availability environments.
• Engineer and integrate medium-voltage (MV) and high-voltage (HV) power distribution components such as switchgear, transformers, busways, and protective relays.
• Specify and qualify electrical components including circuit breakers, contactors, CTs/PTs, surge protection devices, isolation switches for MV/HV applications and the design and development of wiring harnesses

Factory & Facility Integration :

• Design end-to-end electrical distribution systems from generator and utility interface to AI rack integration zones.
• Coordinate with cross functional teams to ensure electrical infrastructure aligns with facility layout, safety codes, and operational requirements.
• Plan and implement power redundancy, load segmentation, and scalable distribution architectures to support high-density compute environments.
• Ensure proper grounding, EMI shielding, and thermal management across all facility-level electrical systems.

Fabrication & Implementation :

• Define fabrication processes including panel building, cable routing, and system integration, ensuring manufacturability and serviceability.
• Perform electrical load calculations, short-circuit analysis, arc flash studies, and thermal modeling using tools such as ETAP, SKM PowerTools, or EasyPower.
• Lead design reviews, risk assessments, and validation testing to ensure compliance with UL, IEC, NEC, CE, RoHS, and REACH standards.
• Interface with suppliers and customers resolve fabrication and quality issues, and ensure adherence to specifications.
• Support prototype builds, field deployments, and customer engagements to gather feedback and refine designs.

Controls Architecture :

• Develop and implement electrical controls architecture for power and cooling systems, including PLCs, SCADA integration, and remote monitoring capabilities.
• Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
• Collaborate with software and automation teams to ensure seamless integration of control systems with facility and product-level infrastructure.
• Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.

Leadership & Documentation :

• Develop and maintain engineering documentation including BOMs, test procedures, and engineering change orders (ECOs).
• Mentor junior engineers and provide technical leadership across cross-functional teams.
• Drive continuous improvement initiatives focused on cost reduction, design for manufacturability (DFM), and product scalability

How will you get here? 

Education :

• Bachelor’s Degree in Electrical Engineering or related engineering discipline.

Experience :

• 10+ years of experience in electrical design and fabrication, with a focus on data center or industrial power systems
• Proficiency in ECAD tools (AutoCAD Electrical, EPLAN, SolidWorks Electrical) and integration with mechanical CAD platforms
• Strong understanding of MV/HV power distribution, lithium-ion UPS systems, and three-phase electrical infrastructure
• Experience with electrical analysis tools (ETAP, SKM PowerTools, EasyPower)
• Proven experience in facility-level electrical design and construction support and Excellent leadership, communication, and cross-functional collaboration skills

Knowledge, Skills, Abilities:

• Excellent interpersonal and communication skills
• Creative, self-motivated, accountable, and team-oriented
• Able to work independently with minimal oversight as part of a global team
• Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
• Skilled in writing reports, business correspondence, and procedural guides
• Effective at presenting information and responding to management, clients, and public queries
• Capable of influencing others and sharing best practices while mentoring less experienced engineers
• Capable of assessing projects, articulating risks, and developing project milestones
• Familiar with stage-gate processes in project lifecycle management (PLCM)
• Excellent problem-solving skills and attention to detail

Preferred Qualifications:  

• Master’s Degree in Electrical Engineering
• Active Professional Engineer (PE) license
• Experience with data center infrastructure: UPS systems, switchgear, CRAC units, and PDUs
• Familiarity with global compliance standards: UL, CE, RoHS, REACH, and IEEE.
• Hands-on experience with panel fabrication, wiring, and system integration
• Knowledge of thermal and mechanical constraints in electrical enclosure design and experience working with global suppliers and contract manufacturers
• Experience in WindChill and DevOps

Job Title: Principal Mechanical Integration Engineer

Job Family : Mechanical Design Engineering 

Organization : Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact? 

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

What will you do?

• Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.

• Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.

• Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.

• Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.

• Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.

• Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.

• Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).

• Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.

• Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.

• Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.

• Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.

• Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.

• Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.

• Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.

• Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

MINIMUM QUALIFICATIONS

Education :  

• Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

Experience :  

• 8 years' experience in mechanical design and integration of mission-critical systems.

• Proven track record of successful system designs and implementations in a relevant industry

• Strong understanding of mechanical systems, integration strategy, and system coordination

• Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.

• Excellent problem-solving skills and attention to detail

• Strong communication and teamwork abilities

PREFERRED QUALIFICATIONS

• Master’s Degree in Mechanical Engineering

• Professional Engineer (PE) License

NALS Apartment Homes believes that an apartment is not simply a place to live, but a place to call home. We embrace opportunities for personal and professional growth, and encourage our employees to share their unique skills, local knowledge, and professional expertise. Our team is the single most important ingredient to our success, and we seek to foster a work environment as welcoming as our apartment communities.

We are looking to add a skilled Maintenance Technician to our team at Eagle Ranch Apartments.

Benefits and Perks

• Starting compensation: $18 - $19 an hour
• $150 per week on-call coverage pay 
• Plus, $35 per call-out performed
• 30% rent discount
• 10+ days of paid time off in your first year of employment
• Comprehensive benefits package including medical, dental, vision, life insurance and disability insurance
• 401(k) with generous employer match
• Employee assistance program
• Wellness program
• Employee referral program
• Maintenance training & certification programs
• Along with tons of other great benefits and amazing perks! 

What you will do

• Ensure all service requests, callbacks, and/or work orders are performed properly and promptly
• Complete assigned maintenance make-ready sheets
• Turn vacant apartments
• Maintain pools and spas, including chemical testing and furniture cleanliness
• Maintain property grounds, workplace, and maintenance shop
• Respond to after-hour calls and emergencies
• Perform additional duties, responsibilities, or projects as assigned

• Minimum 1 year of multifamily maintenance experience
• HVAC experience 
• Previous painting experience
• Skills relating to all building systems
• Knowledge and understanding of the unit turn process
• Knowledge in plumbing and pool and spa
• Familiar with appliance repair, electrical repairs, and basic roofing repairs
• Valid driver license and current auto insurance may be required 
• 40-hour work week, including on-call rotation; weekend availability required while on-call
• Working inside and outside in all types of weather
• Medium to heavy work, requiring prolonged or repeated standing, walking, climbing, stooping, kneeling, crouching, and lifting to a maximum of 100 lbs., with frequent lifting and carrying of up to 50 lbs. 
• Good hand and eye coordination are essential, including the ability to ascend and descend ladders and stairs, and perform repetitive/continuous tasks according to set procedures and sequences

This career position is a great opportunity for someone who is seeking longevity and growth. 

To learn more about our communities and team culture, check us out on Facebook and Instagram.

PI456889690a29-31181-39986129

Overview 

The Residential Design Leader will oversee and grow Bliffert’s Residential Design Department, ensuring a best-in-class customer experience and operational efficiency. This individual will serve as the primary liaison between homeowners, builders, and Bliffert, leading the design intake process, coordinating the team of designers, and managing customer expectations and payments. 

Key Responsibilities 

• Serve as the first point of contact for all residential design inquiries. 

• Conduct consultations to qualify clients and establish budgets. 

• Review and process customer intake forms and credit applications. 

• Lead client meetings (virtual or in-person) to gather design goals and fill in any planning gaps. 

• Maintain and manage the active design project log and assign projects to team designers. 

• Act as liaison between customer, design team, and builder through the entire process. 

• Track designer hours for billing and send invoices for site visits and extra revisions. 

• Approve final plans and oversee delivery of prints and digital files. 

• Promote internal material sales (lumber, windows, trusses, etc.) and track full-package eligibility for design fee refunds. 

• Recruit, hire, and coach new design team members. 

• Evaluate customer satisfaction and adjust team workflows as needed. 

Qualifications 

• 5+ years in residential home design, drafting, or building material sales 

• Strong communication and leadership skills 

• Proven ability to manage multiple customer relationships and project timelines 

• Knowledge of residential building codes and Wisconsin UDC 

• Familiarity with estimating processes and construction methods 

• Proficiency with design software preferred 

Company Benefits  

• PTO and holidays 
• 401K -Employer match 
• Profit Sharing 
• $15,0000 Company paid Life Insurance Policy 
• Company Paid Short-term disability 
• Annual bonus and Annual increase 
• Employee Stock Ownership Plan (ESOP) 
• Medical and Prescription drug insurance 
• Dental and vision insurance 
• Supplemental Life Insurance (Employee, Spouse, Children) 
• Long-term disability insurance 

As a Home Health LPN, you will:

• Provide skilled nursing care to patients, working onsite in their homes, under the direction of an RN.
• Implement individualized care plans in collaboration with the patient, family, and healthcare team.
• Educate patients and their families on disease management, treatment options, and self-care techniques.
• Maintain accurate records of patient care, including documentation of patient visit, interventions, and outcomes.
• Maintain contact with patients, physicians, clinical manager(s), and other members of the healthcare team promptly regarding patient or family needs and status changes. Participate in care coordination activities and discharge planning.

Required Qualifications:

• Current nursing license in the practicing state

• Valid drivers license, auto insurance and reliable transportation

• Current CPR certification

• Two years experience as an LPN/LVN in a clinical setting

Preferred Qualifications:

• Nursing experience in a Home Health or Hospice setting

Pay Range
•    $33.00 - $47.00 pay per visit/unit
•    $53,000 - $73,000 per year base pay

Description of Benefits
Humana, Inc. and its affiliated subsidiaries (collectively, “Humana”) offers benefits for limited term, variable schedule and per diem associates which are designed to support whole-person well-being. Among these benefits, Humana provides paid time off, 401(k) retirement savings plan, employee assistance programs, medical, dental, and vision benefits, volunteer paid time off, up to $400 in wellness rewards, clinician recognition programs, in addition to other recognition opportunities. (Full time and part time roles are benefit eligible).

Additional Information

TB Statement:

This role is considered patient facing and is part of Humana's Tuberculosis (TB) screening program. If selected for this role, you will be required to be screened for TB.

Driving Statement:

This role is part of Humana's driver safety program and therefore requires an individual to have a valid state driver's license and are expected to maintain personal vehicle liability insurance. Individual must carry vehicle insurance in accordance with their residing state minimum required limits, or $25,000 bodily injury per person/$25,000 bodily injury per event /$10,000 for property damage or whichever is higher.

Scheduled Weekly Hours

Pay Range

Description of Benefits

​
Equal Opportunity Employer

It is the policy of Humana not to discriminate against any employee or applicant for employment because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability or protected veteran status. It is also the policy of Humana to take affirmative action, in compliance with Section 503 of the Rehabilitation Act and VEVRAA, to employ and to advance in employment individuals with disability or protected veteran status, and to base all employment decisions only on valid job requirements. This policy shall apply to all employment actions, including but not limited to recruitment, hiring, upgrading, promotion, transfer, demotion, layoff, recall, termination, rates of pay or other forms of compensation and selection for training, including apprenticeship, at all levels of employment.

Supervisor - Power Make Ready Design

Location: Raleigh, NC (Remote)

Are you an experienced Power Utility Designer, Team Lead, or Supervisor? If you are open to joining a supportive, passionate team, we have an attractive opportunity for you!

Sigma Technologies is a growing engineering and design firm with over 500 team members across 30+ states. For more than 25 years, our work for the power and telecommunications industries has helped accelerate and fortify positive impact in communities across the country. Our core values — Safety, Honesty, Truth, and Decency — fuel our culture. We are TeamSigma™.

**To learn more about working at Sigma, view our video and career page.

**If you do not have the experience required for this role, please refer to our other open positions: **While we list our openings in multiple locations, you only need to apply to one as they are remote.

Please note: This position can work fully remotely, but new hires will be required to come to our main office located in Perrysburg, OH for an initial 2 week in-person paid orientation and training period.

Position Description: Project Supervisors are responsible for one or more of the following areas on a specific project/program: Functional Performance, Project Reporting, and/or Personnel Performance. Project Supervisors demonstrate technical expertise and leadership and should be familiar with the commonly used concepts, practices, and procedures in electrical and/or civil engineering environments, preferably in the utility industry, and be able to rely on their experience and judgment to plan and accomplish goals. Supervisors are expected to be able to recommend new and/or improvements to documentation and implement approved changes. While their focus is on the assigned project functions, the failure of their team/area to achieve objectives will impact overall project/program deadlines and results.

The Design Supervisor:

• Provides first-level leadership: Supervises and leads a team or functional activities daily
• Concurrently perform the work of those they supervise
• Provides support to key duties of the Project Manager / Project Engineer
• Assists in the process to review function/project procedures, specifications, and standards
• Works with Project Engineer to set priorities for a team to ensure task completion; coordinates work activities for team members.
• Provides cross-functional representation
• Mentor team members in professional development
• Responsible for performance management of team members
• Complete and deliver annual performance reviews for assigned staff
• Provides input on disciplinary actions
• Adapts management to changing conditions and supports associates affected by the change.

Education/Experience Requirements:

• EDUCATION: High School Diploma or equivalent required, Associates degree or higher is preferred
• EXPERIENCE: 3+ years of experience in the Electric Utility Industry is required; previous experience as a supervisor/manager is strongly preferred
• Advanced field, drafting, and/or design knowledge
• Identified leadership skills
• Familiar with basic concepts, practices, and procedures used in general personnel management
• Strong technical knowledge, oral and written communication skills
• Ability to develop plans and organize work to ensure efforts are focused, resources are aligned, progress is monitored, and targets are met.
• Strong interpersonal skills and the ability to work within a team
• Basic financial management skills
• Ability to learn and operate customer-based proprietary software
• Is available during the “core” work hours of 8:00 a.m. to 5:00 p.m. Eastern Time - evening and/or weekend work may be required as duties demand
• Willing and able to travel as needed, including overnight travel
• Dependable transportation and valid driver’s license and insurance
• Able to pass a background check/drug test/driving record check
• Authorized to work in the United States

Physical Requirements:

• Must be able to endure frequent, lengthy periods of sedentary work and sit for prolonged periods of time, including sitting at a desk or driving in a vehicle.
• Must be able to utilize a computer keyboard, computer monitor, and telephone for prolonged periods of time.
• Must have the physical ability to perform activities such as preparing and analyzing data and figures, transcribing notes, and viewing a computer terminal; these activities require close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
• Must have the physical ability to express or exchange ideas by means of the spoken word and convey detailed or important spoken instructions to other workers accurately, often in a group setting.
• Must have the ability to receive detailed information through oral communication

WHAT WE OFFER: We want our Associates to stay healthy, happy, and secure! We offer you a positive work environment with supportive coworkers, managers, and leaders, plus:

• Competitive pay
• Medical, dental and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs

This job advertisement should not be interpreted as all-inclusive. It is intended to identify the major responsibilities and requirements of a job. The individual may be required to perform job-related responsibilities and tasks other than those stated in this description. This advertisement does not constitute an employment agreement between Sigma and the employee and is subject to change by Sigma as the needs of the organization and/or the requirements of the function change. Pay is commensurate with experience and education. Sigma is an equal opportunity employer and will not discriminate based on an employee’s race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any other classification protected by law.

PM22

PIf01a5f0ccc3a-3631