Deckorators Railing Hardware Jobs in Usa

Russell Tobin's client, an American manufacturing company, is hiring an Assembler in Tualatin, OR

Location: Tualatin, OR 97062

Duration: 24+ months with possible extension or conversion

Pay range: $22/hr - $25.30/hr

Schedules:

Front End Days (Sunday – Tuesday, with every other Wednesday, 5 am – 5:30 pm)

Back End Days (Thursday – Saturday, with every other Wednesday 5 am – 5:30 pm)

Front End Nights (Sunday – Tuesday, with every other Wednesday 5 pm – 5:30 am)

Back End Nights (Wednesday – Friday, with every other Saturday 5 pm – 5:30 am)

General Position Summary:

Navigate computer-based work instructions to install parts and hardware using hand tools and fixtures as required, working on wafer fabrication equipment within a Lean manufacturing clean-room environment.

Responsibilities:

• Use hand tools, torque wrenches, equipment, and fixtures to assemble wafer fabrication equipment.
• Read and follow detailed work instructions and schematics.
• Collaborate within teams to maintain workflow and meet production schedules.
• Adapt to changing priorities, including rework requirements and pilot build projects.
• Verify correct parts delivery and visually inspect components before installation.
• Support audits through visual inspection and checklist verification.
• Close assigned tasks by confirming completion, verifying system steps, and providing a description of work performed.
• Install parts and hardware per digital instructions, using appropriate tools and fixtures, and confirm system completion.
• Consistently demonstrate core values aligned with the company culture.

Safety Protocol:

• Complete all required safety training.
• Follow safe work practices, including proper lifting techniques (up to 35 lbs.), ergonomic use, and stretching.
• Adhere to personal and product safety guidelines: wear appropriate PPE, follow clean-room procedures, comply with Lockout Tagout policies, and use lifting aids (hoists, cranes, lifting tools).
• Perform routine safety inspections and document, correct, or escalate hazards.
• Promote a safe work environment by addressing unsafe practices and escalating unresolved issues.

Communication:

• Demonstrate effective written and verbal communication skills in English.
• Provide timely information to supervisors and co-workers via phone, email, or in person.
• Actively engage in meetings and training.
• Identify and communicate production issues verbally and in writing.
• Suggest continuous improvements to appropriate teams.
• Share system status updates during shift transitions.

Physical Requirements

Note: Physical requirements may vary by site and product line.

Ability to work 12-plus hour shifts in a fast-paced setting, including:

• Lift and install parts up to 35 pounds manually.
• Perform tasks at a working height of 22” from the ground.
• Frequently kneel, crouch, and squat.
• Operate manual tools (wrenches, cutters, etc.).
• Constantly reach into machinery.
• Comfortably climb a 10-step ladder.
• Push/pull assembly dollies with ~40 lbs. of force.
• Navigate diagnostic software on a computer.
• Distinguish colors for wire identification.
• Maintain a clean and organized workspace.
• Adapt to changing priorities, including overtime and rework.
• Management may assign or reassign duties as needed.

Required Skills and Abilities:

• Operate hand tools: calipers, circuit testers, wrenches, hoists, ohm meters, screwdrivers, torque wrenches, ladders/platforms, and snipping tools/cutters.
• Understanding of continuous improvement principles.
• Strong attention to detail.
• Flexible and adaptable to change.
• Proactive and takes initiative.
• Proficient with computer-based data systems and applications.
• Able to navigate Microsoft Office software (Excel, Word, Outlook, Teams).

Benefits that Russell Tobin offers:

Russell Tobin offers eligible employee’s comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), a 401(k)-retirement savings, life & disability insurance, an employee assistance program, identity theft protection, legal support, auto and home insurance, pet insurance, and employee discounts with some preferred vendors.

About Us

At Rufus Labs, we’re on a mission to transform warehouse and supply chain operations with advanced wearable barcode scanners and warehouse intelligence software. Our flagship platform, WorkHero, helps customers double productivity by combining human automation, labor analytics, and intelligent scanning technology into one seamless system. We serve industry leaders across 3PL, eCommerce, manufacturing, and distribution.

We’re looking for a highly organized, execution-focused Business Operations & Marketing Associate to work directly with C-suite and Exec leadership to support cross-functional initiatives across marketing, operations, customer experience, and internal execution. This is for someone who thrives in fast-moving environments and isn’t afraid to jump in wherever needed. This is an early-career, high-growth role for someone who wants to learn how a startup actually runs — not from the sidelines, but in the middle of it.

You’ll help drive initiatives across the company while also jumping in wherever leverage is needed — whether that’s coordinating a trade show, improving a process, supporting customers during a spike, or preparing hardware shipments.

This role is hands-on. It includes real operational work in our LA office. If you’re looking for something purely strategic, this is not that. If you want exposure, ownership, and rapid growth — it might be exactly that.

What You’ll Do

Marketing & Growth Execution

• Manage and schedule LinkedIn/social content
• Coordinate marketing assets (case studies, decks, graphics, product videos)
• Support website updates and campaign launches
• Assist with product launch announcements and outbound initiatives

Trade Shows & Events

• Own logistics for trade shows (shipping devices, booth coordination, travel, lead tracking)
• Ensure demo kits, collateral, and devices are configured and ready
• Coordinate vendors and partners to execute high-quality events

Customer Experience Support

• Step in to support inbound customer requests during demand spikes
• Coordinate internally to resolve issues quickly
• Improve documentation and support workflows over time

Operations & Fulfillment (LA Office)

• Assist with device preparation, configuration, and packaging
• Support inventory organization and demo kit readiness
• Help ship orders when needed

Executive & Cross-Functional Initiatives

• Track and drive execution on key internal projects
• Improve systems and documentation
• Help identify operational bottlenecks and propose solutions

Who You Are

• 0–2 years of experience (startup, consulting, operations, marketing, or similar high-intensity environment)
• Extremely organized and detail-oriented
• Comfortable moving between strategy discussions and hands-on execution
• Strong written and verbal communicator
• Tech-savvy and comfortable using modern tools (HubSpot, Google Workspace, Apollo, Slack, AI tools, etc.)
• Based in Los Angeles and willing to work in-office when needed

Most importantly: 

• You don’t say “that’s not my job.”
• You move quickly and take initiative.
• You care about outcomes more than titles.
• You want to build something meaningful — and grow with it.

What You’ll Gain

• Direct exposure to company leadership
• A front-row seat to how a hardware + software startup scales
• Broad operational experience across marketing, sales, customer success, and logistics
• Increasing responsibility over time based on performance
• A path toward senior operations or leadership roles as the company grows

Growth here is earned. If you perform, your scope will expand.

Compensation

• Competitive salary based on experience
• Meaningful early-stage equity

How to Apply

Send us your resume along with a short note explaining:

1. Why you want to work at a high-velocity logistics tech company
2. A time you stepped outside your job description to get something done
3. Why Rufus Labs specifically

We value initiative. Show us yours.

• Perform immediate, periodic, and overhaul maintenance on gaming machines, equipment, and hardware.
• Repair and diagnose machine faults.
• Isolate electronic faults at board level and refer to senior level slot technician.
• Read, understand, and accurately apply information contained within repair manuals and other equipment-related materials.
• Carry and effectively communicate by two-way radio.
• Maintain a working knowledge of new slot products/equipment.
  
  

• Must be at least 21 years of age.
• Must possess a thorough knowledge of the mechanics, electronics, and electrical functions of gaming machines.
• One (1) year of experience in slots or a related field or graduate from slot repair school or similar course of study strongly preferred.
• Must be able to work with various hand tools and power tools.
• Must be able to stand and walk for duration of shift.
• Must be able to stoop over, kneel, and crouch while repairing gaming machines.
• Must be able to push and pull machines and maneuver weights up to 80 pounds.
• Must be able to obtain/maintain any necessary licenses and/or certifications.
  
  

The Electronic Controls Project Managerwill provide hands-on Project Management and technical leadership for Controller and Digital product solutions

Key Responsibilities

• Define project scope, timelines, dependencies, and deliverables with key stakeholders
• Lead cross-functional teams across hardware, software, controls, testing, and product development
• Ensure alignment of product, controls, and mobile app projects with customer installation and service experience
• Develop and maintain detailed project plans, metrics, and issue tracking for transparent execution
• Facilitate regular project reviews, status updates, and issue resolution
• Participate in design reviews to ensure required hardware and software features are incorporated
• Drive risk management through requirements traceability, FMEA, and test execution

What You Need

• Bachelor’s degree in Electrical, Computer, or Mechanical Engineering
• Some Exposure in developing embedded, microprocessor-based controls and digital products
• Strong experience with system requirements, traceability, FMEA, and electronics failure analysis
• Proven ability to lead cross-functional teams and deliver complex technical programs
• Excellent communication, presentation, and stakeholder management skills

Preferred Qualifications

• Master’s degree in Engineering
• Experience in gas appliances, HVAC, or water heating systems
• Background in electronics design, software, manufacturing, or quality/reliability
• Project Management certification
• Six Sigma Green Belt / Black Belt Certification

About GreyOrange

GreyOrange is a global leader in AIdriven robotic automation software and hardware, transforming distribution and fulfillment centers worldwide. Our solutions increase productivity, empower growth and scale, mitigate labor challenges, reduce risk and time to market, and create better experiences for customers and employees. Founded in 2012, GreyOrange is headquartered in Atlanta, Georgia, with offices and partners across the Americas, Europe and Asia. For more information, visit Solutions

The GreyMatter Multiagent Orchestration (MAO) platform provides vendor agnostic fulfillment orchestration to continuously optimize performance in real time: the right order, with the right bot and agent, taking the right path and action. Currently operating more than 70 fulfillment sites across the globe (with deployments of 700+ robots at a single site), GreyMatter enables customers to decrease their fulfillment Cost Per Unit by 50%, reduce worker onboarding time by 90% and optimize peak season performance. In retail stores, our gStore end to end store execution and retail management solution supports omnichannel fulfillment, real time replenishment, intelligent workforce tasking and more. Using real time overhead RFID technology, the platform increases inventory accuracy up to 99%, doubles staff productivity, and enables an engaging, seamless in store experience.

Senior Manager – Project Management

Location: Atlanta, USA

About the Role

As a Senior Manager in the GreyOrange Project Management team, you will lead complex, multi-geography implementation programs and ensure seamless coordination across internal and external stakeholders. You will be responsible for driving successful project delivery within committed timelines and budgets while upholding global best practices, structured processes, and exceptional customer experience.

The ideal candidate is a strategic thinker who excels at customer satisfaction, proactive planning, cross-functional leadership, and transparent communication. You will work closely with teams across Professional Services, Product & Engineering, Manufacturing, Client Support, Customer Success, and customer organizations to deliver high-impact automation solutions.

Please note that responsibilities may evolve as the organization grows, and the list below is not exhaustive.

Key Responsibilities

Pre-Sales Phase

• Understand customer requirements and project objectives.
• Define implementation strategies considering geography, integration needs, and delivery constraints.
• Prepare high-level project timelines.
• Collaborate with proposal teams to estimate project effort and service requirements.

Project Planning Phase

• Ensure smooth project transition from Sales to Delivery.
• Analyze the contract, define scope, key deliverables, and major milestones.
• Establish project charter, communication channels, and meeting cadence.
• Coordinate with customer and internal cross-functional teams to conduct gap analysis.
• Define success criteria (timelines, KPIs, budget) and establish baselines.
• Ensure adherence to standard project processes, SOPs, and governance frameworks.

Project Delivery Phase

• Monitor progress against timelines, budget, and milestone commitments.
• Maintain seamless communication between customer and stakeholders.
• Ensure timely completion of customer responsibilities (site readiness, infrastructure, resources).
• Collaborate with supply chain teams for on-time hardware delivery.
• Track testing progress, highlight delays, and drive issue resolution.
• Log, track, and escalate issues/bugs through JIRA and structured issue management processes.

Project Execution Phase

• Manage cross-functional resource allocation and travel planning.
• Validate customer site readiness and ensure readiness before deployment.
• Oversee software readiness, deployment, and testing activities.
• Coordinate integration testing across regions, customer teams, and HQ.
• Set up and lead war rooms when required.
• Support UAT planning, execution, and KPI monitoring for ramp-up.
• Assist in closing NPD tickets and project handover to Client Services.
• Drive creation of handover documentation, sign-offs, and project closure reports on Confluence.

Qualifications & Requirements

• Bachelor’s degree in Engineering (IE/EE/EC/ME) with 7+ years of experience.
• Master’s degree or MBA in Operations or Project Management preferred.
• Strong project management experience in industries such as warehousing, supply chain, logistics, manufacturing, automotive, or oil & gas.
• 12+ years in Project/Program Management, Change Management, Consulting, P&L, or People Management.
• 7+ years in warehouse operations or end-to-end automation / DC commissioning.
• Strategic thinker with strong organizational and leadership agility.
• Certification of PMI-PMP is mandatory.
• Strong analytical and problem-solving abilities.
• Ability to influence and collaborate with cross-functional teams.
• Excellent communication, execution, negotiation, and stakeholder management skills.

GreyOrange provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

ABOUT VERDEGO AERO, INC.

VerdeGo Aero is an aircraft propulsion technology company committed to powering the highest performance electric aircraft of all sizes. The VerdeGo team is passionate about enabling hybrid-electric powerplants to create a next generation of flying machines. This is not an incremental change but rather the 3rd major revolution of aircraft propulsion in the 120-year history of powered flight, disrupting the industry in ways not seen since the advent of the jet engine 75 years ago. Innovations in propulsion always lead to step changes in aircraft design. VerdeGo Aero’s headquarters is at the “World’s Most Famous Beach”, in warm and relaxed Daytona Beach, Florida. Daytona Beach is the home of the Daytona 500 NASCAR race, bike weeks, jeep week and the collegial environment of the largest university focusing on aviation and aerospace, Embry-Riddle Aeronautical University.

Position Summary:

This role supports hands‑on fabrication and prototype development for hybrid-electricpropulsion systems for new and novel aircraft. The technician will build, modify, and assemble components in metals and plastics, applying aircraft‑grade workmanship, and support wiring and integration tasks for electric and mechanical subsystems. The ideal candidate is a creative problem‑solver who can work from prints and fabricate solutions from scratch when needed.

Key Responsibilities:

• Prototype assembly: Build and integrate components, subassemblies, and test articles used in aircraft propulsion development.
• Light fabrication: Cut, drill, bend, and finish metals and plastics using shop tools and fabrication equipment.
• Wiring & integration: Route, terminate, and secure wiring harnesses, sensors, and electrical components following aerospace‑quality practices.
• Print interpretation: Read and follow engineering drawings, schematics, and assembly instructions with minimal supervision.
• Creative problem‑solving: Design and fabricate brackets, fixtures, mounts, and test hardware from scratch when propulsion testing requires a custom solution.
• R&D test support: Assist engineers with propulsion test setups, instrumentation routing, plumbing, and iterative design changes.
• Aircraft‑grade workmanship: Apply precision fastener practices, torque discipline, and clean, repeatable build standards appropriate for propulsion systems.
• Shop organization: Maintain a clean, safe, and well‑documented workspace aligned with aerospace and propulsion safety expectations.

Required Qualifications:

• Prototype build and assembly experience, including hands‑on integration of mechanical and electrical components, subassemblies, and test articles.
• Fabrication proficiency with metals and plastics, including safe and effective use of hand tools, power tools, and basic shop equipment.
• Wiring and electrical integration skills, including harness routing, terminations, strain relief, and clean, organized installation.
• Ability to interpret engineering documentation, including mechanical drawings, wiring diagrams, schematics, and basic GD&T.
• Strong attention to detail and aircraft‑grade workmanship, including torque discipline, fastener standards, and clean build practices.
• Effective communication and collaboration skills, especially when working closely with engineers and other technicians.
• Comfort working in a fast‑paced R&D environment with evolving propulsion requirements.

Preferred Qualifications:

• Demonstrated creativity and mechanical intuition, including the ability to design and build simple fixtures, brackets, mounts, or test hardware without existing prints.
• Experience reviewing CAD models (SolidWorks, Creo, or similar) for part visualization and build preparation.
• TIG or MIG welding experience suitable for light structural work.
• Experience supporting rapid prototyping, including fixtures, test rigs, or early‑stage engineering builds.
• Familiarity with AS9100 or aerospace quality systems.

Physical demands:

• Must have the ability to lift and/or move up to 25 pounds regularly and 50 pounds occasionally.
• Work in a Manufacturing Hangar environment.

Nothing matters more to VerdeGo Aero than our strong ethical and safety commitments. As such, all U.S. positions require a background check, which may include a drug screen.

To conform with International Traffic in Arms Regulars (ITAR), you must be a U.S. citizen or a lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C.1324b(a)(3), or actively working towards obtaining the required authorizations from the U.S. Department of State.

VerdeGo Aero, Inc. is An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other federally protected class.

Director of Engineering- New Product Development

Location: San Diego, CA (Onsite)

Relocation Assistance Available

Overview

A leading global medical technology organization is seeking a senior engineering/R&D leader to drive complex product development initiatives within a high-impact device portfolio.

This role is responsible for leading enterprise-level development programs spanning hardware, software, and systems integration. You will serve as the central business and execution owner for new product initiatives, ensuring strategic alignment, operational excellence, and predictable commercial delivery.

This is not a traditional project management role; this is a cross-functional business leadership position with full accountability for results.

Key Responsibilities

Enterprise Program Leadership

• Direct end-to-end development of complex, regulated medical device programs from concept through commercial launch
• Lead cross-functional teams across R&D, Regulatory, Quality, Operations, Marketing, and Service
• Ensure execution aligns with portfolio strategy, revenue targets, and long-term platform growth

Strategic & Business Alignment

• Translate corporate objectives into executable development roadmaps
• Drive prioritization and trade-off decisions to protect timelines and business value
• Present program status, risk posture, and strategic updates to executive leadership

Execution & Operational Excellence

• Establish integrated program plans, milestones, and measurable success criteria
• Manage budget forecasting and resource planning
• Oversee risk management frameworks, mitigation planning, and escalation pathways
• Ensure readiness for design transfer, manufacturing scale-up, and commercial release

Organizational Impact

• Build high-performing, accountable cross-functional teams
• Remove roadblocks and accelerate decision-making
• Mentor emerging leaders across technical and functional groups
• Champion continuous improvement in product development processes

Qualifications

Required

• Bachelor’s degree in Engineering or a scientific discipline
• 9+ years of experience in medical device product development or another highly regulated industry
• 5+ years leading complex, cross-functional teams
• Proven track record delivering successful new product launches
• Strong understanding of design controls, quality systems, and regulatory frameworks (FDA experience preferred)
• Experience with design transfer and manufacturing readiness

Preferred

• Advanced degree (MS or PhD)
• Experience leading hardware/software integrated systems programs
• Background in capital equipment or connected medical technologies

About Cooler Master is a global PC hardware brand with 30 years of innovation in cooling, cases, systems, and performance technology. North America is one of our most strategic regions and plays a major role in influencing global direction, product positioning, and market adoption. Our team operates fast, collaborates openly, and expects strong ownership.

This role is for someone who wants to shape how our products are understood, launched, and adopted in the US and Canada. You will work closely with global product teams, regional sales, PR, social, and technical marketing to turn technology into clear value for end users. You will help define product stories for NA and work across every stage of the launch cycle.

Role Summary

The Product Marketing Manager for CMNA is responsible for translating product capabilities into clear reasons to believe for the North America market. This includes regional positioning, go-to-market planning, launch readiness, competitive analysis, product messaging, and campaign alignment with global counterparts.

This role requires someone who can work independently, manage cross-functional alignment, and bring clarity to a fast-moving environment.

Responsibilities

Key Responsibilities

1. Product Positioning and Messaging

• Translate global product direction into NA-focused messaging that matches regional user behavior and market dynamics
• Build product briefs, value propositions, talking points, and competitive stories
• Align with PR, Technical Marketing, Digital, and Sales to ensure consistent narrative

2. Go-to-Market Ownership

• Drive NA launch readiness for cases, cooling, peripherals, and systems
• Build launch plans for regional campaigns including retail, digital, social, community, and PR
• Ensure sales, channel partners, and internal teams have the right assets and messaging

3. Competitive and Market Analysis

• Track category trends across key competitors (Corsair, NZXT, Razer, HyperX, Thermaltake, Noctua, Logitech)
• Identify market gaps, pricing sensitivity, product opportunities, and feature expectations
• Provide clear weekly or monthly insights to support sales and product decisions

4. Sales and Channel Support

• Partner with CFT to create channel-ready product decks, sell-in materials, retail messaging, and A+ content
• Support Amazon, Newegg, Best Buy, Micro Center, B&H with product claims, visuals, and positioning
• Help optimize product page content, feature callouts, and consumer-facing descriptions

5. Cross-Functional Execution

• Work with Global PM to gather product data, specs, and roadmaps
• Coordinate with Technical Marketing to validate claims and build reviewer guides
• Align with PR on product briefings and local media priorities
• Collaborate with Social and Community teams to create story-driven content

6. Internal Leadership and Process

• Drive clarity in cross-team communication and campaign alignment
• Manage NA launch calendars and ensure deliverables are on time
• Document lessons learned and help continuously refine NA product marketing workflow

Qualifications

• 3–6+ years experience in product marketing, hardware, gaming, PC components, or consumer tech
• Strong understanding of NA PC market, retail channels, and trends
• Proven ability to build product positioning and simple narratives from complex technology
• Experience with GTM planning and cross-functional execution
• Comfortable working in fast-moving environments with limited instruction
• Strong written communication and ability to create decks, briefs, and messaging guides

Preferred

• Experience working with global teams and time-zone-distributed organizations
• Familiarity with cases, cooling, PSUs, peripherals, or enthusiast PC components
• Understanding of technical marketing, testing methodology, and reviewer landscape
• Experience supporting Amazon or retail partners with product launch assets
• Prior work with influencer, PR, or tech media teams

Cultural Fit

• Self-driven and proactive. Does not wait for instructions or overly defined processes
• Comfortable with ambiguity and able to create structure where none exists
• Strong collaborator who communicates clearly and works well across regional and global teams
• Takes ownership of problems and drives solutions to completion

Key Responsibilities

• Monitoring & Alerting: Proactively monitor network systems, servers, and services to detect issues before they affect users.
• Troubleshooting: Diagnose and resolve technical problems related to network connectivity, hardware, and software.
• Incident Management:
• Respond to, document, and track alarms in ticketing systems (e.g., Jira, ServiceNow) until resolution
• .
• Maintenance: Configure, update, and maintain network hardware and firmware.
• Coordination: Collaborate with internal teams and vendors to escalate and fix complex issues.

Requirements:

3 + years experience with embedded C/C++ with Datalink, wireless, wifi, canalyzer, canope Position’s Contributions to Work Group:

Responsible for performing and leading the requirements, design, development, & test of network communication and foundational information software used in embedded systems on Caterpillar machine & industrial applications for Common Services and Network Solutions team. The Software developer and designer will develop embedded ‘C’ and/or C++ code software solutions to meet system requirements. This job involves developing and using system requirements to design, develop, and test software components used in machine control platforms, engine control platforms, display, and telematics platforms. Specific responsibilities include requirements development and analysis, software design, software implementation, interface between software layers, and development/execution of test procedures. Additional responsibilities may include interfaces between hardware and software as well as evaluating operational performance of an overall system. The software components must comply with the software architecture standards and all work will be performed as part of the existing team following a common process. The software will include components for Data Link and Common Services (e.g.,Data link protocol implementations, Diagnostics, Hardware Abstraction Layer and Information services)

-

Reason/motivation for request:

- Addition

Candidate Value Proposition

· Why Caterpillar?

· For this role within your business group – what stands out about this opportunity (ex – exposure, skill development, etc)?

Why Caterpillar? “Whether it be ground-breaking products, best in class solutions or a lifelong career, you can build what matters to you at Caterpillar. With 150 locations in countries around the world, what you create at Caterpillar travels and helps people around the world. You can collaborate with the best minds in the industry, complete meaningful work and continuously grow and develop through our various opportunities. Here, you can do the work that matters.”

Why this Role?

Typical Day or Week in the Role

· Typical task breakdown and rhythm

· Interaction level with team

· Team Structure

· Work environment description

Typical task breakdown:

- Work on project with mentor and team- This would include requirements, design , code and testing of software in C or C++.

Interaction with team:

-

Work environment:

- In office 5 days

Candidate Requirements

· Years of experience required

· Degrees or certifications required

· Top 3 Skills

· Disqualifiers/Overqualifications

· Performance indicators

Education & Experience Required:

- Requires a minimum of Bachelor’s degree in Electrical, Electronics or Computer Engineering or Computer Science

- 2 years experience

- Will consider Master's Degree or above applicable project/internship work toward years' experience but durations must be listed for each on resume with 1 year of experience

- Design and coding of C and or C++ experience - minimum three years' experience.

Technical Skills

- Demonstrated depth of experience developing software in Embedded C and/or C++ - minimum three years' experience.

(Desired)

- Knowledge of machine systems or mechanical knowledge.

Soft Skills

- Great communication and teamwork

- Problem solving skills

- Customer service and interpersonal skills