Conduit Github Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

As a Industrial Maintenance Electrician you will be a vital part of our manufacturing team installing, maintaining electrical equipment. Operate, install electrical systems and preform functional of building and plant equipment.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities:

• Operate, install electrical systems and perform functional testing of building and plant equipment (e.g., machines, motor controls, room re-models)

• Determine if system should be shut down or work must be performed with power source on

• Lock out, tag out, try out equipment and related systems

• Perform primary and secondary testing on electrical breakers during routine maintenance; replace, update and retro fit breakers

• Perform routine tests on high voltage switches and relays, using hi-potential test equipment (Hipot), replace switch or relay

• Troubleshoot electric motors using appropriate test equipment

• Monitor current, voltage, amperage, frequency and watts hours at sub-stations using online computing system

• Check and service electrical systems, using infrared analysis sheets to locate hot spots in service panel

• Service and maintain electrical systems on various types of overhead cranes

• Operate, install electrical systems and perform functional test of building and plant equipment (e.g., machines, motor controls, room re-models)

• Install and perform routine maintenance on all types of lighting fixtures (e.g., fluorescent, halide, standard); clean and check sockets, and replace ballast and bulbs

• Run high voltage electrical cable from sub-station to unit station; cut and splice cable, test cable for resistance

• Install, replace and repair fiber optic cable for computers and computing systems

• Bend conduit and install junction boxes; pull wire of various gauge and color through conduit using a fish tape; install and connect switches and outlets

• Check work after completion or after each operation; ensure job is per drawing and WAC, NEC codes; evaluate job for work to be performed (e.g., wire size, electrical load, conduit)

• Operate mechanical lifts of various types (e.g. tiger lift, spider lift, snorkel lift), to access work areas

• Install wire, crimp, terminate, and solder using tools (e.g., crimpers, wire cutters, soldering gun) in plant electrical systems

• Establish/verify voltage, amperage, frequency and watts using test equipment (e.g., circuit trackers, sonic circuit chasers, volt, amperage meters)

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 3+ years of experience as an Electrician or Apprentice.

• 1+ years of experience maintaining industrial equipment.

• Experience working from heights and using fall protection equipment with weight limitations .

• Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.

• Must be able to complete fall protection training.

Preferred Qualifications:

• Electrician license (EL01 &/or EL 07) or an electrical card.

• Crane related experience.

• Experience with prime power.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidate must live in the immediate are or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range: $33.32 per hour – $61.01 per hour

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Position summary:

Install, maintain, and repair electrical systems, apparatus, and electrical equipment, wiring and fixtures, and electronic components of industrial machinery and equipment following electrical code, manuals, schematic diagrams, blueprints, and other specifications, using hand tools, power tools, and electrical and electronic test equipment.

Tasks:

• Install power supply wiring and conduit for newly installed machines and equipment following electrical code and blueprints, using hand tools and voltage tester.
• Install ground leads and connect power cables and wires to machines and equipment, following manuals, schematic diagrams, blueprints, using hand tools and test equipment.
• Diagnoses malfunctioning apparatus, such as transformers, motors, and fixtures using test equipment.
• Repair or replace faulty electric components, wiring, equipment, and fixtures, using hand tools and power tools.
• Test malfunctioning or broken equipment using test equipment, and discuss malfunction with other workers to diagnose malfunction.
• Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
• Place conduit, pipes or tubing, inside designated partitions, walls, structures or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
• Connect wires to circuit breakers, transformers, or other components.
• Install ground leads and connect power cables to equipment, such as motors.

Skills:

• Installation - Installing equipment, machines, wiring, or programs to meet specifications.
• Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
• Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
• Troubleshooting - Determining causes of operating errors and deciding what to do about it.
• Equipment Selection - Determining the kind of tools and equipment needed to do a job.
• Repairing - Repairing machines or systems using the needed tools.

Attributes:

• Follow the rules of safe conduct at all times.
• Demonstrate ability to effectively utilize materials/resources in cost-effective manner.
• Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
• Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
• Oral Comprehension - The ability to listen to and understand information and ideas presented through spoken words and sentences.
• Information Ordering - The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
• Arm-Hand Steadiness - The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
• Manual Dexterity - The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.

Knowledge Requirements:

• Post-Secondary Certificate desirable- awarded for training completed after high school. Minimum 5 years in craft, including helper and apprentice roles. Minimum 2 years as journeyman working in industrial environment
• READING: The employee must have the ability to read safety requirements, instructions in the correct use and maintenance of shop tools, be able to read and understand methods and procedures that are present on drawings, layout work, and just specifications.
• WRITING: Must have the ability to write simple reports with the correct format using spelling and grammar. (English
• SPEAKING: Must have the ability to speak using correct English with a well modulated voice.
• The minimum math ability usually associated with this classification is the ability to calculate surface areas, translate these figures into a bill of material which can be used to complete a specific job. Employees must be able to use variable and formulas which are normally found in most industry approved trade hand books. Also, employees must be familiar with the O.S.H.A. requirements for the type work that is being performed.

The employee must understand that the reporting system used for problems and information is as follows: 1) Crewleader, 2) Foreman, 3) General Foreman, and 4) Superintendent.

Physical Requirements:

• Positions require working in: climbing, bending, sitting, walking, kneeling, crawling, standing, lifting, pushing, and pulling.
• Good hand eye balance and the ability to distinguish colors are required in order to use the tools that are necessary to perform the required work.
• Employees must have vision which has good depth perception in order to judge distance and space relationships.
• The employee must be able to work in all types of weather conditions.
• The ability to work in elevated positions is a must.
• The employee must be able to work in confined spaces as well as wear the following safety equipment when need be: life vests, ear protection, rubber gloves, leather gloves, hard hat, slicker suit, acid suit, rubber gloves, full face breathing mask, wearing full safety harness, or wearing a face shield.
• The heavy work will require the employee to exert up to 100 pounds of force occasionally: The medium work will require the exerting of 50 pounds of frequently: The remainder of the work should require the exertion of 20 pounds of force to constantly move an object.

Other Requirements:

The employee must have a telephone. The employee is expected to work overtime in order to maintain the plant in a safe and productive state. The employee is expected to make call outs when such work is available and the employee’s services are needed.

The employee must have a valid Texas Driver’s License and have permission prior to operating any TIG vehicle. The requirements for operating a company vehicle are as follows: In the past three (3) years the employee can have had only 4 moving violations, no more than 2 chargeable accidents, and no D.W.I.

NOTICE: THIS JOB DESCRIPTION IN NO WAY STATES OR IMPLIES THAT THESE ARE THE ONLY DUTIES TO BE PREFORMED BY THIS EMPLOYEE. HE OR SHE WILL BE REQUIRED TO FOLLOW ANY OTHER INSTRUCTIONS AND TO PERFORM ANY OTHER DUTIES REQUESTED BY HIS OR HER SUPERVISOR.

Job Type: Full-time

Role:

Join project teams across the U.S. as the on-site catalyst who turns AI ideas into working reality. Partnering with each project’s AI Champion (Project Manager or Superintendent), you’ll uncover pain points, redesign workflows, and deploy AI agents that cut down reporting, accelerate RFIs, simplify lookahead planning, progress updates, materials tracking, and more. When needed, you will develop user stories and coordinate development with the central AI Studio. You’ll help advance the vision of the “Construction Site of the Future,” showing how agentic AI will transform project operations.

Location: New Haven, Connecticut

Responsibilities:

• Opportunity hunting and workflow redesign – Lead Lean/Six Sigma discovery workshops; map value streams, assess process and data maturity, and log low-effort/high-impact AI use cases.
• Process and data maturity assessment – Evaluate each jobsite’s current workflows and underlying data; surface gaps that block AI adoption and develop phased improvement plans with Operations Excellence to establish the right process baseline before deploying agents.
• Assess the market solutions – Evaluate off-the-shelf and platform tools; launch pilots, measure impact, and scale wins.
• Rapid AI-agent builds – Convert user stories into production-ready agents in Copilot Studio / Power Apps/Automate, ChatGPT Enterprise, or code-first frameworks within days; wire them to Teams/SharePoint on the front end and Databricks Lakehouse or other sources on the back end.
• Enterprise-grade engineering & LLMOps – Build RAG pipelines backed by Delta tables, Unity Catalog, and Databricks Vector Search; automate infra with GitHub Actions / Posit; monitor latency, cost, adoption, and drift.
• Data integrations – Partner with Data Engineering to design and maintain ETL pipelines, API integrations, and event-driven connectors feeding RAG and agents.
• Cross-cloud orchestration – Blend OpenAI, Azure OpenAI, and AWS Bedrock behind secure custom connectors; package agents for seamless rollout.
• Change enablement – Train crews, gather feedback, iterate, and track adoption and ROI metrics; apply influence model principles to embed agents into daily routines and SOPs, and track behavior change KPIs.
• Stakeholder communication – Brief project leadership and clients on agent impact in clear business terms; contribute use cases and playbooks for “Construction Site of the Future.”
• Escalation & hand-off – Draft clear user stories, data specs, and acceptance criteria for any complex solution that requires the central AI Solution Engineers or Data Engineering / Data Science team to lean in.

Qualifications:

• 3+ years in AI engineering / full-stack data applications or data science, including 2+ years building production LLM/RAG solutions.
• Bachelor’s in CS, Engineering, Physics, or a related field; Master’s preferred.
• Prior hands-on work in construction or heavy process industries (manufacturing, oil & gas, chemicals) is a significant plus.
• Demonstrated process excellence background (Lean/Six Sigma Green Belt or equivalent) with experience diagnosing process and data gaps and supporting change management plans with Operations Excellence.
• Strong facilitation and communication skills.
• Hands-on expertise with Copilot Studio, Power Apps/Automate, custom connectors, and CoE Toolkit governance.
• Programming & data stack: Python, SQL, Databricks Lakehouse, vector stores.
• DevOps & IaC: GitHub Actions (or Azure DevOps) and Posit Workbench/Connect automation or comparable CI/CD tooling; strong Git/GitHub workflow discipline.
• Integration & ETL skills: Foundational understanding of ETL/ELT design, Airflow or Databricks Workflows, and REST/GraphQL API development; proven collaboration with Data Engineering on source-to-lake and lake-to-agent pipelines.
• Willing and able to travel and work on active jobsites.

Requisition ID # 168118 

Job Category: Maintenance / Construction / Operations 

Job Level: Individual Contributor

Business Unit: Electric Operations

Work Type: Onsite

Job Location: Hayward

This job posting will be utilized to fill open Journey-level Electrician-General Construction positions within ALL REGIONS of our service territory. Open positions could become available at any time and based on business needs.

Department Overview  

The people of Electric Operations ensure the delivery of safe and reliable electric service to our customers. Electric Operations is responsible for every aspect of PG&E's electric distribution and transmission operations, including planning, engineering, maintenance and construction, asset management, business planning, restoration, and emergency response.

Position Summary

This classification is represented by the International Brotherhood of Electrical Workers (IBEW) local 1245, which has over 100 years of experience representing employees at PG&E.

This position may be subject to Joint Apprentice Training Committee (JATC) review and approval. Provisional hires will be required to participate in targeted training to achieve journey-level knowledge of electrician roles and responsibilities.

Please note: Per letter of agreement (LOA) 23-36; All future employees who are hired, assigned, placed, or bid (after the execution date of this agreement) into one of the classifications listed (in agreement) and in the San Francisco Division ONLY is eligible for a 15% pay premium and will be subject to a “bid lock” for three (3) years.

In addition, Peninsula, De Anza, East Bay, and Mission divisions are eligible for a 10% pay premium and will be subject to a “bid lock” for three (3) years.

General Construction (GC)

For GC positions individuals must be able to travel and transfer to a new headquarters upon request at any time, throughout the entire PG&E service territory with no guarantees as to how long you will be away from home.  

• Reviews, verifies, and modifies prints and electric schematics. Lays out materials for installation, such as conduit, steel, wires, junction boxes, tools, etc. Places orders for supplies as needed.
• Moves equipment to staging area. Performs safety preparation including performing high voltage protective grounding.
• Uses power tools and hand tools to install equipment and systems, such as wire terminations, high voltage equipment, overhead and underground electrical and conduit systems, steel structures, control panels, metering and protection systems, air switches. Sets up rigging. Pulls wire.
• May operate construction equipment, if qualified, such as crane truck, man lift, boom truck, bucket truck as part of installation, excavation, and compaction. Operates forklift to move and reposition equipment.
• Uses hand and power tools, such as jackhammers, whackers, and shovels to remove and replace soil.
• Removes old high voltage equipment, structures and other impediments prior to installation using heavy equipment, rigging and other tools.
• Drives equipment on the job site (substation). May drive equipment from one job site to another. May drive a company vehicle to pick up tools or other equipment away from the job site.
• Maintains work area in a clean and safe condition. Removes trash, debris, and excess materials. Picks up and reorganizes tools.
• Overtime may be required.

PG&E is providing the hourly rate that the company in good faith believes it might pay for this position at the time of the job posting. This position is subject to collectively bargained hourly wage rates and increases. The starting wage rate for this position is $68.56 per hour. This wage rate is specific to the locality of the job. The wage rate is based on multiple factors, including, but not limited to, specific skills, education, licenses or certifications, experience, market value, geographic location, collective bargaining agreements, and internal equity.

Qualifications - 

Minimum:

• Must be at least 18 years of age.
• Must possess a High School diploma or GED.
• Must possess and maintain a valid California Class C Driver’s License
• Must show proof of  successful completion of a Union Sanctioned JATC Inside Wireman Electrician Apprenticeship
• Ability to work in all types of weather extremes.
• Ability to drive safely in all weather and road conditions.
• Must be willing to travel/ transfer to new headquarters upon request at any time; throughout the entire PG&E service territory with no guarantees as to how long you will be away from home (For GC positions)
• Ability to work extended hours, nights, weekends and holidays, and various work schedules.
• Ability to work in remote work locations with potential exposure to poison oak, snakes, spiders, bees, mosquitoes, ticks, rodents etc.
• Must be able to wear company provided Personal Protective Equipment (PPE)
• If hired as Provisional, must pass the provisional training plan within 12 months from hire date.
• CA CDL Class A Permit, or equivalent, subject to 150% driver/vehicle ratio

Desired:

• 3-5 years Journey level experience in commercial or industrial electrical construction
• PG&E construction or utility experience
• Experience with electronic or mechanical equipment
• Instrumentation and Control experience
• Motor Control experience
• Electrical Substation or Power Generation experience
• High voltage experience
• Experience working with testing equipment and troubleshooting

Pre-Employment Testing:

PG&E Employees: You must have qualified on all prerequisite tests prior to submitting an application; and all secondary tests prior to interviewing. For more information on prerequisite and secondary exams, including study guides, please visit the  Pre-employment testing program website.

• Physical Test Battery (PTB)
• Work Orientation Inventory-Physical/Technical Driving (WOI-D)
• Electrician Assessment 

Wireman/Journeyman Electrician

Bacon Plumbing, Heating, Air & Electric is seeking a skilled Wireman/Journeyman Electrician responsible for installing, maintaining, repairing, and inspecting electrical systems in commercial, industrial and/or residential settings. You will work independently as well as with a team, ensuring code compliance, safety, quality workmanship, and excellent customer service.

Key Responsibilities

• Install, assemble, and maintain electrical systems (service panels, breakers, wiring, lighting systems, outlets, switches, transformers, generators, etc.).
• Read and interpret blueprints, building plans, electrical diagrams, and specifications to determine work procedures.
• Measure, cut, bend, and install conduit (EMT, PVC, rigid, etc.) and pull and terminate wiring using appropriate tools and methods.
• Install, repair, or replace electrical fixtures and equipment such as lighting fixtures, ceiling fans, outlets, switches, panels, and circuit breakers.
• Locate and mark electrical system layouts; cut or core openings in walls/floors as needed for routing conduit and wiring.
• Perform inspection and testing of electrical systems for continuity, voltage, resistance, grounding, and proper operation; troubleshoot and make corrections as required.
• Maintain and repair electrical infrastructure including branch circuits, feeders, service equipment, and low-voltage systems (if applicable).
• Supervise or assist apprentices or helpers as needed (depending on job site/team).
• Ensure adherence to local, state, and national electrical codes, safety regulations, and company policies (including OSHA and other safety standards).
• Maintain tools, equipment, and company vehicles in good working order.
• Maintain documentation of work performed, materials used, and job progress (work orders, parts requisitions, time sheets).
• Be available for scheduled on-call, emergency repair work, or after-hours work as needed.

Qualifications:

• Valid and active Wireman/Journeyman Electrician License issued by the Texas Department of Licensing and Regulation (TDLR) or equivalent.
• Industry-related knowledge and experience.
• Good communication and customer service skills.
• Proven sales experience in business-to-consumer home services sales.
• A progressive career path with home services trades experience.
• Strong knowledge of electrical tools, materials, components, and accepted practices.

Benefits

Bacon offers the following benefits in order to achieve a happy and healthy team culture together:

• Medical
• Dental
• Vision
• 401k with match
• Life Insurance
• PTO and paid holidays

Job Type: Full-time

Pay: Competitive salary + Bonus eligibility

Work Location: In person

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Rochester, NY

SUMMARY: A program designed to train a skilled worker through a combination of on-the-job training and classroom instruction to become a Maintenance Technician at American Packaging Corporation. Maintenance Technicians are responsible for electrical and mechanical systems in the facility, which will include troubleshooting and routine maintenance activities. Throughout this program, they will learn to troubleshoot and repair equipment problems that affect productivity of the manufacturing group as well as plant facilities and subsystems. They will learn to be involved with the process improvements providing input in production problem solving.

Approval Process: Applicants will be interviewed and chosen based on their experience, knowledge, and overall work history. The chosen finalists will be required to take and pass an aptitude test.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

Duration: 3-4 years for completion

Classroom Training: Several courses required through local school, such as Electrical, Industrial, Mechanical and Machining courses.

Hours of Work: As needed for class schedule, must be flexible.

On the Job Training:

A. Tool and Supply Room (~200 hrs)

Learn size of wire conduit and bending of conduit, use of tools and how to determine the size of load safety.

B. Lighting (~200 hrs)

Replacement of incandescent lamps and hot cathode fluorescent tubes and starters. Repair of fluorescent fixtures, replacing ballast, socket and wiring, code requirements. Repair of LED fixtures, replacing drivers and troubleshooting.

C. Trouble Shooting AC Wiring (~300 hrs)

Learn to locate and repair contactor problems, replacing contacts and contactor. Locate and replace blown fuses. Check and repair limit switches, push buttons, etc.

D. Special Circuits AC (~500 hrs)

Learn to read wiring diagrams. Operation of special control circuits, time delay switches, electrical braking.

E. Direct Current Machinery (~500 hrs)

Learn to locate and repair direct current motor troubles in fields, armatures, bearings, brush holders, and commutators. Knowledge of variable speed DC drives. Repair and maintenance of DC contactors and field control.

F. General Wiring (~500 hrs)

Learn proper handling and installation of power feeding, wiring, fuse panels, breakers, etc. Estimate load requirements. Code requirements. Install general wiring.

G. Instruments (~100 hrs)

Learn proper use and care of voltmeter, ammeter, watt meter, oscilloscope and megger, etc.

H. Computerized Controls (~600 hrs)

Programmable logic controllers: reading diagrams and schematics; maintaining and troubleshooting.

I. Care, Use and Safety of Tools and Equipment (~500 hrs)

Hand tools, power tools, machines and power equipment, ladders, scaffolding and hoists.

J. Machine Repair (Mechanical) (~1500 hrs)

Assembly and disassembly, bearings, power transmission, construction, rigging, lubrication. Safety.

K. Bench Work and Machinery (~300 hrs)

Lathes, milling machines, grinding machines, drill press, power saw, etc. Safety.

L. Pipefitting (~300 hrs)

Layout, installation, repair, replacement, pumps and compressors, valves and controls. Safety.

M. Welding (~500 hrs)

Protective clothing and equipment, burning and cutting, controls and gauges, electric arc welding, properties of metals. Safety.

QUALIFICATION REQUIREMENTS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

High School Diploma or Equivalent. Active, regular Full-time employee of American Packaging Corporation. Part-time or temporary employees of APC are not eligible to participate in this program.

LANGUAGE SKILLS

Ability to read, analyze, and interpret general business periodicals, technical procedures, or instructions. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from others.

MATHEMATICAL SKILLS

Ability to calculate figures and amounts such as proportions, percentages, area, circumference and volume. Ability to apply concepts of basic algebra and geometry.

REASONING ABILITY

Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

PHYSICAL DEMANDS

The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand, walk, sit, and talk or hear. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include color vision.

WORK ENVIRONMENT

While performing the duties of this job, the employees is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

Job Location:

Sacramento, CA 95834.

About the Job:

Title of the Position: Automation Technician

The Automation Technician ensures reliable operation of sterile pharmaceutical manufacturing systems by installing, maintaining, calibrating, and troubleshooting automation components, process instrumentation, drives, motors, control devices, clean utility systems, and aseptic production equipment. The role supports continuous and compliant operations under cGMP, FDA 21 CFR Part 11, and cleanroom standards.

Responsibilities:

• Install, maintain, calibrate, and troubleshoot sensors and transmitters for pressure, temperature, flow, level, pH, conductivity, and environmental monitoring.
• Support in performing GMP‑compliant calibrations with complete traceability and accurate documentation.
• Install, maintain, and troubleshoot motors, pumps, fans, drives, control devices, and sterile manufacturing equipment.
• Perform conduit bending, cable routing, wire pulling, cable termination, tray installation, and equipment connections in accordance with plant procedures.
• Install and modify control panels, junction boxes, and instrumentation assemblies.
• Diagnose issues in circuits, protection components, sensors, actuators, drives, and automated machines.
• Use diagnostic tools such as multimeters, clamp meters, insulation testers, and calibration instruments.
• Support PLC, HMI, SCADA, BMS, and EMS platforms, including troubleshooting and system checks.
• Conduct loop checks, functional tests, FAT/SAT, commissioning, and support validation activities (IQ/OQ/PQ).
• Maintain and troubleshoot systems for PW, WFI, Clean Steam, CIP/SIP, HVAC/HEPA controls, and aseptic filling/packaging operations.
• Read and interpret P&IDs, wiring diagrams, schematics, ladder logic, and loop drawings.
• Maintain cleanroom support systems, including differential pressure controls, HEPA filtration, and environmental monitoring.
• Ensure compliance with cGMP, cleanroom classification requirements, FDA 21 CFR Part 11, and data integrity principles.
• Perform preventive, corrective, and predictive maintenance.
• Conduct root‑cause analysis and implement CAPA actions.
• Maintain accurate CMMS entries, calibration logs, and audit‑ready documentation.

Working Condition:

• Ability to work rotating, weekend, or extended shifts.
• Exposure to high‑noise areas (PPE provided).
• Frequent work on mezzanine floors, elevated platforms, ladders, and step‑ups.
• Work inside aseptic cleanrooms and controlled environments (ISO 5/7/8) wearing full gowning.
• Exposure to hot, cold, humid, or pressurized utility systems such as PW, WFI, Clean Steam, and HVAC units.
• Occasional work in tight spaces, behind panels, or equipment enclosures.
• Regular use of PPE, including sterile gowning, gloves, and eye protection.
• Ability to lift to 50 lbs and perform hands-on tasks for extended periods.

Qualifications:

Education:

• BE – Mechanical/Chemical from a reputed University

Experience: Minimum 5 to 10 years of professional experience in the field of pharmaceutical or manufacturing industry.

Knowledge, Skills, and Abilities: Functional:

• Strong troubleshooting skills across sensors, transmitters, motors, drives, actuators, control components, automated machinery, and process systems.
• Experience with conduit bending, tray installation, cable pulling, wire routing, cable dressing, and termination.
• Proficiency in installing and modifying panels, junction boxes, and equipment assemblies.
• Skilled in using multimeters, clamp meters, insulation testers, and calibration devices.
• Ability to install, connect, and terminate control wiring and instrument cabling for field devices.
• Understanding of circuits, drives, starters, protection components, actuators, and control system diagnostics.
• Ability to read and interpret P&IDs, schematics, wiring diagrams, ladder logic, and loop documentation.
• Knowledge of GMP requirements, sterile manufacturing, cleanroom practices, aseptic operations, and validation processes.
• Strong documentation discipline, attention to detail, and audit readiness.
• Ability to work efficiently and safely in regulated manufacturing environments.

Behavioral:

• Result oriented
• Innovative thinking
• Time Management, Professional Work Conduct at all times
• Problem-solving ability & High level of self-motivation
• Strong interpersonal relationship skills
• Strong written & verbal communication skills

Requirements:

• Valid driver's license and acceptable driving record
• Legally authorized to be employed in the United States
• Must live or be willing to move to the Sacramento Metropolitan Region (Approx 40 miles' radius)

Benefits:

• Competitive Salary: $80,000 - $90,000
• Yearly bonus eligibility
• Benefits: offers a wide variety of benefits and programs to support health and well-being, including medical, dental, and vision coverage
• Paid time off plan
• 401k savings plan

Job Title: Electrical Superintendent – Commercial Construction

Location: Fort Myers/Cape Coral area

Overview

We are seeking an experienced Electrical Superintendent to oversee the planning, coordination, and installation of electrical systems on new and existing commercial construction projects. This role is responsible for ensuring work is executed safely, efficiently, and in full compliance with contract documents, codes, and company standards. The ideal candidate is a strong field leader with deep electrical expertise, sound judgment, and the ability to manage crews and jobsite operations effectively.

Key Responsibilities

The Electrical Superintendent plans and assigns daily work activities based on workforce capabilities and project needs. This position orders materials and tools, schedules major deliveries, and attends jobsite meetings to coordinate with project stakeholders. The superintendent supervises electrical installations to verify compliance with drawings, specifications, and applicable codes.

Responsibilities also include calling for inspections, accompanying inspectors during walkthroughs, and documenting any violations or deficiencies. The superintendent notifies the general contractor or appropriate administrators of any code violations, omissions, conflicts, or deviations identified in the installation documents.

This role enforces all company safety programs, including safety, drug-free workplace, and hazardous communication requirements. The Electrical Superintendent works closely with manufacturers, owner representatives, and owners to ensure proper installation and system performance. Understanding employee strengths and placing individuals in the most appropriate tasks is a key part of this role.

Qualifications

Candidates must possess a Journeyman or Master Electrician license and have completed a minimum of four years of formal training through an approved apprenticeship program. A minimum of eight years of field experience in commercial electrical construction is required, along with prior supervisory experience.

Required certifications include OSHA 10-hour training, First Aid and CPR, and Hilti or Cadweld certification. Candidates must have strong leadership and interpersonal skills, with the ability to work effectively across all trades and levels within a jobsite environment.

Applicants must be knowledgeable in the operation of electrical tools and equipment, including conduit benders, lifts, cable tuggers, KO sets, trenchers, backhoes, cranes, generators, and related equipment. The ability to read and interpret drawings, specifications, wiring diagrams, and contract documents is essential. Candidates must also be able to identify potential price changes, produce clear sketches, and communicate technical information effectively to field personnel. A valid driver’s license is required.

Education and Experience

A minimum of four years of experience working on commercial electrical projects is required, along with demonstrated supervisory experience.

Skills and Abilities

The Electrical Superintendent must demonstrate strong organizational skills, be self-motivated, and capable of managing multiple responsibilities in a fast-paced environment. Basic mathematical skills and sound reasoning abilities are required to support daily decision-making and problem-solving.

Physical Requirements

This position requires the ability to work in active construction environments, including climbing ladders and scaffolding, working at heights, lifting and carrying up to 50 pounds, bending, crouching, crawling, and working overhead for extended periods. Normal vision and hearing are required, with or without corrective devices.

Work Environment

The role is performed in active construction jobsite environments that may include noise, debris, uneven surfaces, and potential safety hazards such as trenches and openings. Employees must remain alert and adhere to all safety protocols at all times.

Equal Employment Opportunity

Meisner Electric, Inc. is an Equal Opportunity Employer and a Drug-Free Workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability, veteran status, or any other protected characteristic

Seniority Level

Mid-Senior level

Industry

Construction

Employment Type

Full-time

Job Functions

ManagementStrategy/PlanningProject Management

Skills

TrainingConstructionCommercial ConstructionSupervisory SkillsMechanical, Electrical, and Plumbing (MEP)Problem SolvingOSHA ComplianceElectrical Conduits

K2 Pure Solutions, founded in 2010, is a Chlor-Alkali Manufacturer operating inherently safer technology to produce chemicals such as bleach for water disinfection in the surrounding Northern California communities. Bleach is the modern, preferred water treatment chemical displacing chlorine throughout the world. K2 Pure Solutions produces bleach onsite from nothing but salt, water, and electricity eliminating the danger and risk of a chlorine railcar release into communities trans-America. Other chlor-alkali products produced by K2 Pure Solutions include chlorine, hydrogen, hydrochloric acid, and caustic soda. 

ESSENTIAL DUTIES AND RESPONSIBILITIES

·      Interpret schematics, wiring diagrams, ladder logic, flow diagrams, P&ID's and construction blueprints

·      Will be working with low voltage

·      Install conduit and conduit bracing and fittings

·      Ensures that K2 Pure Solutions’ safety procedures are followed

·      Instrument calibration of equipment

·      Install tubing and perform instrument technician normal duties

COMPETENCIES

·      Must be familiar in instrumentation troubleshooting and repair techniques

·      Must be (or become) qualified to operate a man-lift, scissor lift, forklift and respirator fitted

·      PLC knowledge (Allen Bradley RSLogix 5000 preferable)

·      Must be able to work in high places and work in confined spaces

·      Must be knowledgeable of Miro-Motion Mass Flow meters, Hi-Tech Analyzers, level and flow meter installation and maintenance monitoring

·      Good PC working skills

·      Familiar with MS Office suite including Excel and Word

EDUCATION AND/OR EXPERIENCE

·      High School Education or Equivalent

·      ETEC degree preferred or relevant experience

Company Benefits

•           Subsidized medical, dental, and vision insurance

•           Medical and dependent care FSA options

•           401k company matching with immediate vesting

•           8 company paid holidays plus 2 floating holidays of your choice

•           Employer paid 1x annual life insurance

•           Paid sick leave

•           Paid vacation that increases with years of service

•           Regular social events for employee & employee’s family

Compensation - The starting base pay for this role is between $43.26 - $75.00 hr at the time of posting. The actual base pay depends on many factors, such as education, experience, and skills. Base pay is only one part of K2 Pure Solution’s competitive total compensation package that can includes strong benefits, perks, and bonuses. The base pay range is subject to change and may be modified in the future.

Job Title: Cloud Systems Engineer

Location: Pleasonton, CA - Onsite with 80%

Duration: 9 Months

Pay Range: $70/hr -$90/hr on W2 (DOE)

Description:

This hybrid cloud role will be part of a talented team that is responsible for the growth, on-going maintenance and development of IaaS running primarily on Linux and Windows in cloud and on-premises. Provides level 3 support (on an on-call support rotation model) for complex systems and applications. Work across product teams and operations to design and implements tools that automate infrastructure configurations, provisioning, builds, and deployments.

This position will be remote and will need to work nights and weekends.

Responsibilities:

• Updating, designing, and adding automation for provisioning and managing infrastructure, operating system, and middleware components.
• Designing, engineering, and maintaining a highly complex and secure cloud environment for Oracle and Azure Cloud.
• Provide support for complex system and applications, rolling out new systems, maintaining, migrating, upgrading and improving the long-term performance of the systems.
• Perform as a member of the systems administration team to support the installation, optimization, integration, troubleshooting, backup, recovery, modification, security, and upgrading of IT systems and components to provide services that enable customers to effectively apply IT to business requirements
• Have knowledge of tools and mechanisms for distributing new or upgraded software to ensure customers receive current versions of supported software, as they become available.
• Shall be able to work with other senior staff to recommend and design systems architecture and topology from both general and specific perspectives.
• Provide an on-call support rotation model.

•Collaboration & Influencing

•Learning Agility

•Drives Results

•Customer Impact

Skills and Experience:

• Bachelor's degree or equivalent experience in IT Preferred and 6+ years of progressive experience in engineering and design capacities, and documentation.
• The ideal candidate must be a self-starter with strong work habits and have mid-level career experience in maintaining large numbers of Linux and Windows servers in Bare Metal, ESX, and Cloud environments.
• Deep Understanding of Windows/Linux Fundamentals including Reading/Understanding system logs, run tracing and debugging tools, and network packet captures for analysis of resolving root cause.
• Implementing and Administering VMware ESX/ESXi/Vcenter, Creating vSwitches, Port groups, NIC Teaming, Bonding, and VLAN or Virtual Network Problem management.
• Experience with public cloud platforms – IaaS, PaaS, Kubernetes, Docker, and Vagrant (Azure & OCI are preferred)
• Experience with Automation technologies like Infrastructure as a Code with Chef, Terraform, and Jenkins. Deployment technologies such as, PXE Kickstart, Windows SCCM, and configuration managment for mobile devices. Scripting experience, specifically with Bash/python/Ruby/Perl/Powershell language Preferred.
• Experience with Warehouse or Manufacturing automation a plus working with PLC, Conveyance, and Warehouse Controls Systems, Understanding of Warehouse Management Systems, and Prior work with real-time systems Preferred
• Experience with Monitoring tools like Nagios or New-Relic and Kafka or other stream service.

Additional Skills:

• Github/Github Actions
• Ansible/Chef
• Azure/OCI Cloud
• Linux Containers/Kubernetes/Docker
• Oracle KVM / KVM
• Oracle Enterprise Linux

Benefits Info: Russell Tobin/Pride Global offers eligible employee’s comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance and employee discounts with preferred vendors.

Lead Android Engineer

Contract to Hire

Hybrid – Onsite in Irving, TX (75063) Tue–Thu; Remote Mon & Fri

Our Fortune 500 retail client is seeking a hands-on Lead Android Engineer to drive technical excellence and innovation across their mobile platform. This role will help evolve a mature Android application while delivering high-quality experiences that support millions of customers across eCommerce, loyalty, personalization, and product launches.

The team is focused on differentiating the mobile app from the web experience through personalized content, contextual assistance, and intelligent upsell opportunities. This role requires someone who has made architectural decisions, influenced technical direction, and led implementation — not just executed against predefined designs.

This is not a pure architect role, but it requires strong architectural judgment combined with deep hands-on development expertise.

Key Responsibilities

• Serve as a hands-on technical leader within the Android team.
• Design, build, and enhance Android applications using Kotlin and Jetpack Compose.
• Make informed architectural decisions within an established Android application using MVVM and Clean Architecture principles.
• Guide the implementation of new features in alignment with scalable, maintainable architecture standards.
• Partner closely with the Mobile Architect while owning day-to-day technical decision-making for the Android team.
• Act as the go-to technical resource for Android engineers, helping answer implementation questions and remove blockers.
• Integrate and manage third-party SDKs and libraries, understanding dependency management, versioning conflicts, and potential performance implications.
• Implement API integrations and evaluate libraries needed to support new functionality.
• Contribute to proof-of-concepts (POCs) that explore innovative mobile capabilities and customer engagement strategies.
• Develop personalization features that differentiate the app experience from the web.
• Implement and optimize push notification capabilities to drive engagement and upsell opportunities.
• Strengthen application stability by implementing unit tests and embedding automated quality checks within the CI/CD pipeline from the Android codebase.
• Participate in production incident management and provide technical leadership during issue resolution.
• Conduct thorough PR reviews, promote code quality standards, and ensure proper documentation.
• Leverage AI-assisted development tools (e.g., GitHub Copilot) to improve efficiency and elevate engineering practices.
• Stay current with Android ecosystem trends and proactively recommend improvements.

Required Qualifications

• Bachelor’s degree in Computer Science, Information Technology, or equivalent experience.
• 7+ years of hands-on Android development experience.
• 5+ years of Kotlin development experience.
• Strong experience with Jetpack Compose.
• Proven experience making architectural decisions within an existing Android application.
• Hands-on experience implementing MVVM and Clean Architecture principles.
• Experience integrating third-party SDKs and adding libraries within complex Android projects.
• Experience implementing REST API integrations and managing dependencies.
• Strong unit testing experience and experience improving application stability.
• Experience contributing to accessibility (ADA) improvements.
• Hands-on experience with Google Play Console, including publishing and maintaining Android applications.
• Experience working in Agile development environments.
• Must be authorized to work in the U.S. without sponsorship and able to convert to a full-time W-2 employee upon completion of the contract.

Technical Skills

• Kotlin, Android Studio, Jetpack Compose
• MVVM, Clean Architecture
• Hilt, Gradle
• JSON, REST APIs
• SDK & third-party library integration
• Firebase, Crashlytics, Adobe Analytics, Google Analytics
• Push Notifications
• CI/CD integrations at the Android application level
• AI-assisted development tools (e.g., GitHub Copilot)

Work Environment

• Hybrid schedule (Irving, TX)
• On-call support may be required.
• Occasional weekend or evening work may be required.

*Final compensation will be determined based on experience, skills, and location*

Advanced Software Engineering Manager – DevOps / CI/CD

Location: Onsite – Cincinnati, Ohio (Blue Ash)

Employment Type: Direct Hire

Compensation: $145,000–$160,000/year

Benefits: Health, Dental, Vision, 401(k) with Match, PTO, Paid Holidays, and additional enterprise benefits

Travel: None

Start: ASAP

Open Role Due To: Technology modernization and enterprise platform expansion

About the Role

Our client, a global leader in enterprise technology and innovation, is seeking an Advanced Software Engineering Manager – DevOps / CI/CD to architect, operate, and continuously enhance a modern CI/CD ecosystem that enables fast, secure, and reliable software delivery across the organization.

This role will drive pipeline scalability, automation maturity, platform modernization, and operational excellence. You will partner closely with development, QA, architecture, IT, security, and product teams to accelerate engineering productivity while ensuring enterprise-grade security, compliance, and governance standards are met.

This is a highly visible leadership role requiring both strategic vision and strong hands-on technical expertise.

What You’ll Do

• Lead the design, development, and delivery of scalable, high-quality DevOps and CI/CD solutions aligned to enterprise architecture standards
• Architect and modernize CI/CD pipelines using Azure DevOps, GitHub Actions, Jenkins, and/or GitLab CI
• Develop Infrastructure as Code solutions using Terraform, Ansible, ARM/Bicep, and related tools
• Translate technology strategy into actionable roadmaps supporting enterprise project portfolios
• Drive modernization initiatives across cloud, infrastructure, automation, and security domains
• Lead migration strategies from current-state to future-state architecture aligned with capital planning cycles
• Present architectural recommendations to executive leadership, including cost/benefit and risk analysis
• Mentor engineers on software engineering best practices, reusable design patterns, and architectural principles
• Promote reusable frameworks, shared libraries, and automation standards
• Author and review architectural artifacts including system diagrams, interface specifications, and technical design documentation

Why This Role Stands Out

• Enterprise-wide impact with high visibility to senior leadership
• Opportunity to modernize and scale CI/CD platforms in a large, complex environment
• Strong influence over cloud architecture, automation strategy, and operational excellence
• Competitive compensation and comprehensive benefits package

What We’re Looking For

• Bachelor’s Degree in Computer Science or STEM-related field
• 8+ years of experience in DevOps, CI/CD, Infrastructure Engineering, or Site Reliability Engineering
• 5+ years leading the design and delivery of complex, large-scale, high-quality software or automation systems
• Strong hands-on expertise in software or infrastructure engineering, including design patterns and code structure
• Expertise with CI/CD platforms (Azure DevOps, GitHub Actions, Jenkins, GitLab CI)
• Strong proficiency in Infrastructure as Code tools (Terraform, Ansible, ARM/Bicep)
• Deep knowledge in at least two of the following: cloud platforms, APIs, application development, infrastructure/network design, middleware, servers & storage, database management, or operations
• Solid understanding of network and security architecture principles
• Experience with Linux and/or Windows systems, virtualization, and containerization
• Experience with enterprise observability and monitoring platforms
• Proven ability to operate strategically while delivering hands-on technical solutions
• Strong written, verbal, and presentation communication skills

Preferred Skills

• Experience building and mentoring high-performing engineering teams
• Experience designing and implementing elastic architectures in Azure and/or Google Cloud Platform
• Experience working in large-scale or regulated enterprise environments
• Experience with Google Cloud Platform (GCP) or Google Distributed Cloud (GDCE)
• Awareness of industry trends and competitive DevOps landscape

• 
  
• 
  Design, implement, and manage cloud infrastructure on Azure using Terraform and Terragrunt.
  
  
• 
  Maintain and optimize Kubernetes clusters on Azure Kubernetes Service (AKS).
  
  
• 
  Build and manage CI/CD pipelines using GitHub Actions/Workflows and ArgoCD for GitOps deployments.
  
  
• 
  Enhance system reliability by implementing monitoring, alerting, and observability solutions with Grafana.
  
  
• 
  Automate operational tasks to reduce toil and improve team efficiency.
  
  
• 
  Participate in on-call rotations, incident response, and post-mortem analysis.
  
  
• 
  Collaborate with development teams to improve application performance, scalability, and resilience.
  
  
• 
  Implement and advocate for SRE best practices, including SLIs, SLOs, and error budgets.
  
  
• 
  Continuously improve system performance, cost efficiency, and security.
  
  

• 
  
• 
  3+ years of experience in an SRE, DevOps, or cloud infrastructure role.
  
  
• 
  Strong experience with Azure cloud services and infrastructure.
  
  
• 
  Hands-on experience with java and Terraform and Terragrunt for infrastructure-as-code.
  
  
• 
  Proficiency with Kubernetes (preferably AKS and container orchestration.
  
  
• 
  Experience with CI/CD tools, especially GitHub Workflows/Actions and ArgoCD.
  
  
• 
  Solid understanding of observability tools like Grafana (Prometheus, Loki, Tempo experience is a plus).
  
  Education Requirements Bachelor's degree required, (Masters preferred)
  
  

• 
  
• Design and build internal tools and automation-including API linting frameworks, OpenAPI specification validators, code?generation utilities, and workflow automation-to improve consistency, quality, and efficiency across the API lifecycle.
  
• Ensure developer experience is at the center of all software created, building intuitive, reliable, and friction?reducing tools that empower API producers and consumers and simplify their workflows.
  
• Collaborate, coordinate, and align with technical stakeholders such as architecture, platform engineering, security, and API governance teams to ensure tooling meets enterprise needs and integrates seamlessly with broader technical ecosystems.
  
• Apply industry best practices to deliver secure, scalable, and maintainable solutions that align with clients engineering, security, and compliance standards.
  
• Drive development activities from design through delivery, ensuring tools and services are released on time and effectively support both API producers and consumers.
  
• Champion code quality, implementing comprehensive unit testing, functional testing, and automated validation to ensure highly reliable solutions and fast feedback loops.
  
• Demonstrate engineering excellence, consistently applying high?quality engineering practices-including clean code principles, strong testing strategies (unit, integration, functional), CI/CD pipeline integration, versioning discipline, and reliable automated deployment strategies-to ensure tooling is robust, maintainable, and production?ready.
  
• Ensure all software created adheres to strong security principles, including secure coding practices, automated security scanning, vulnerability mitigation, and alignment with enterprise security standards-ensuring tooling is safe by design, safe by default, and safe in production.
  
• Support the tech lead in evaluating and shaping technical decisions, contributing insights and execution capabilities related to tooling, automation, and developer?experience improvements.
  

• 
  
• Programming & Scripting: Java | Python | JavaScript | TypeScript, Bash / Shell Scripting
  
• API Design & Management: RESTful APIs, OpenAPI / Swagger (Specification, Validation), API Linting Frameworks, API Governance & Standards Enforcement, API Versioning Strategies
  
• Automation & Tooling: Code Generation Utilities, Workflow Automation Tools, Internal Developer Tooling, CLI Tools
  
• Testing & Quality Engineering: Unit Testing | Integration Testing | Functional Testing, Automated Validation Frameworks, Test Automation Tools, Code Quality & Static Analysis Tools
  
• CI/CD & DevOps: CI/CD Pipelines (GitHub Actions, GitLab CI, Jenkins), Automated Build & Deployment Pipelines, Artifact Repositories, Infrastructure Automation
  
• Cloud & Platforms: Cloud Platforms (AWS / Azure / GCP), Containerization (Docker), Kubernetes (optional / platform-dependent)
  
• Security & Compliance: Secure Coding Practices, Automated Security Scanning (SAST / DAST), Vulnerability Management Tools, Dependency Scanning, Compliance & Enterprise Security Standards
  
• Developer Experience (DX): Developer Tooling & Enablement Platforms, Documentation Automation, API Consumer & Producer Enablement Tools
  
• Collaboration & Version Control: Git | GitHub | GitLab, Agile / Scrum Methodologies, Issue & Work Tracking Tools (Jira, similar)