Conduit Github Jobs in Usa

The Electrician II (Maintenance) performs maintenance, repair and installation as may be required on the interior building and exterior electrical distribution and lighting systems on the campus.

Essential Duties And Responsibilities:

• Repairs defective outlets and switches; replaces burned out or defective exterior lighting; Checks and replaces defective circuit protection devices including fuses up to 4160 volt.
• Troubleshoots and repairs problems with interior and exterior distribution and lighting; also electrical problems with various equipment such as air handlers, freezers, pumps, etc. Purchases working stock of electrical supplies and assure adequate levels are maintained; Estimates material requirements for jobs requiring other than on-hand supplies and purchase same.
• Prepares and executes a scheduled preventive maintenance program for all electrical distribution, and lighting systems;
• Assists and advises contractors in the installation of new service outlets, lines and switches as necessary to support new equipment or other requirements.
• Assures balanced loading of panels and prevents rated capacity from being exceeded.
• Employs energy conservation at every available opportunity.
• Checks operation, repair and replacement of sump pumps in manholes on a regular basis;
• Monitors signal, telephone, and high voltage cable installations in manhole systems. Cleans Manholes.
• Facilitates inspections and repair of campus lighting system; Re-lamps interior areas as required;
• Performs repair and preventative maintenance checks and services on variety of items including but not limited to stadium light towers, power risers, switchgear, motor control centers, all roof exhaust fans, fire alarm systems under supervision of a licensed fire alarm technician, all motors over 5 hp., variable frequency drives, and transformers.
• Installs new circuits and perform electrical system modifications in accordance with NEC and local electrical codes; Installs all types of conduit systems for electrical, telephone, data and HVAC controls.
• Provides for repair of primary electrical distribution system with members sharing a university cell phone on a rotating basis and providing 24-hour coverage during electrical emergencies.
• Performs scheduled maintenance checks and services on back-up generators and automatic transfer switches.
• Provides excellent customer service.
• Perform lead role on jobs when helper is assigned.
• Performs other duties as assigned.

Qualifications:

• High School Diploma or GED required
• Completion of two-year technical training school in electrical trades required; three or more verifiable years as a journeyman electrician preferred.
• Must possess State of Texas Journeyman Electrician License
• Must possess knowledge of electricity sufficient for troubleshooting electrical and electronic control systems such as automation and energy management systems.
• Must possess proficiency with motor starters, relays, switches, and motor control circuits including 480 volt.
• Must maintain a valid driver's license, motor vehicle liability insurance and personal injury insurance, and complete the University Van Driver Training within 90 days of employment date.
• Must clear and maintain a favorable background investigation and clearance
• Must be able to work evenings and/or weekends as needed
• Must carry company provided cell phone and respond to calls on a 24 hour basis when on-call.
• Must be proficient in speaking, reading, and writing English; must have ability to read written instructions, warning labels, and SDS Sheets in English.
• Must possess legible handwriting, possess eyesight in both eyes corrected to 20/20 and normal hearing ability (may be corrected); must successfully pass a PIPIC test for color blindness.
• Must be able to successfully handle frustrating conditions such as limits on time and limited access to equipment.
• Must possess mathematical ability to add, subtract, multiply, and divide in order to compute material costs as required for completion of work order form.
• Ability to work in an environment that requires a high level of security.
• Ability to operate and work from heights on a man-lift, ladder, cat-walk, roof, or scaffolding.
• Demonstrated knowledge in National Electrical Code and local codes. Ability to read and understand blueprints and technical drawings.
• Ability to use computers and IPad, ability to use Microsoft Office Suite, with an emphasis on Outlook, Word, Excel, and Power Point and Teams, ability to use virtual meeting platforms (zoom) a plus
• Ability to understand and observe general industry safety standards.
• Familiarity with the use of general office equipment, phones, copiers, fax machines, etc.
• Maintain satisfactory and harmonious relationships with the public, and fellow employees each day to assure/sustain quality service and appropriate interactions with others

Physical Demands:

• Able to carry 80 pounds up and down stairs
• Frequent standing, kneeling/squatting, bending/stooping, pushing/pulling, and twisting
• Frequent walking, climbing stairs/ladder/scaffolding, grasping/squeezing, wrist flexion/extension, and overhead reaching; frequent driving
• Work outside and inside, on slippery or uneven walking surfaces; frequent exposure to extreme hot and cold temperatures, inclement weather, insects, dust, toxic chemicals and fumes, noise, vibration, and electrical hazards; work around gas lines; work around machinery with moving parts; may work in tight or enclosed spaces; may work alone; may work irregular hours

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. St. Mary's University is a Hispanic-Serving Institution and an Equal Opportunity Employer.

Essel is looking for a dedicated and experienced Solar AC Electrical Foreman to lead our solar installation teams. In this role, you will oversee the installation, maintenance, and repair of solar electrical systems, ensuring projects are completed on time and to the highest standards of quality and safety.

Our Electrical Site Lead needs to have scheduling flexibility with an ability to travel to different jobsites.

Key Responsibilities:

• Troubleshooting and diagnosing faulty systems, devices, and parts by utilizing testing equipment and as well as hand tools to identify the sources of the malfunction to resolve the issue.
• Proficiency in electrical competencies including identification of faults in AC/DC electrical systems and the capacity to troubleshoot and resolve them.
• Analyzing electrical systems, equipment, and components to identify hazards, defects as well as the necessity for modification or maintenance and to ensure code compliance.
• Verifying the compatibility and safety of electrical systems by testing the continuity of circuits within the wiring, equipment, and fixtures by utilizing testing devices to ensure the integrity and functionality of the entire system.
• Providing continuous feedback to management regarding any potential hazards associated with the ongoing operation of equipment.
• Performing job duties on ladders, scaffolding, and roofs to install, maintain or repair any electrical wiring, equipment and/or fixtures.
• Completing physically demanding tasks such as (but not limited to): trench digging, underground installation of conduit, and long- term bending, crouching, pulling, lifting, etc.
• Understanding plans, specifications, contracts, blueprints, safety documents and any other workplace or job site related documentation pertaining to each job.
• Demonstrating efficient problem-solving skills while identifying and mitigating safety hazards, code violations and other electrical issues

COMMERCIAL ACCOUNTS SPECIALIST

REPORTS TO: SENIOR BUYER IN WORK APPAREL

STATUS: NON-EXEMPT

Summary

Boot Barn is where community comes first. We thrive on togetherness, collaboration, and belonging. We build each other up, listen intently, and implement out-of-the-box ideas. We celebrate new innovations, congratulate one another’s achievements, and most importantly support each other.

At Boot Barn, we work together to make a positive impact on the world around us, and by working collectively with encouragement, we consider ourselves “Partners.” With the values of the West guiding us, Boot Barn celebrates heritage, welcomes all, and values each unique Partner within our Boot Barn community.

Our vision is to offer everyone a piece of the American spirit – one handshake at a time.

Boot Barn is looking for a Commercial Accounts Specialist to join our Merchandise team. The Commercial Accounts Specialist will be a key conduit between the Boot Barn buying team and our commercial accounts sales team for work boots and work apparel. While the Commercial Account Specialist is directly accountable for placing and tracking purchase orders, because they serve as a connection point between the buying team, the commercial accounts team and stores, they will have tremendous opportunity to build problem solving skills, collaboration skills and gain knowledge about product details and product assortments that are right for our customer. The ideal candidate would have at least 1-2 years of experience in buying, operations, sales, production or inventory management and eager to grow with Boot Barn.

Essential Duties and Responsibilities

• Work between commercial accounts and buying team to find efficiency in both assortment and ways of working by developing a robust knowledge of the products available, deep understanding of the work customer and developing new processes between teams (order placement, tracking orders, projecting needs).
• Work closely with the Commercial Account Team and Vendors to help fulfill sales needs in a timely and accurate manner, track orders and relay information between teams.
• Participate in the bi-weekly call with the Merchants and Commercial Accounts and attend vendor meetings where necessary.
• Analyze the business on a weekly basis to identify opportunities: providing weekly recaps and tracking Commercial Account sales using the CRM system.
• Confirm inventory with vendor prior to placing CA orders, track shipping, and confirm customer bought in full.
• Style creation and maintenance in Aptos for special order styles.
• Communicate with vendors regularly on PO flow and issues.
• Assist the stores with receiving issues, training them as needed on standards and procedures.
• Assist the accounting department in troubleshooting invoicing errors.
• Perform any other duties that may be assigned by management.
• Adhere to all local, federal and state laws in addition to Company policies, procedures, and practices.
• Demonstrates high level of quality work, attendance and appearance.
• Demonstrates high degree of professionalism in communication, attitude and teamwork with customers, peers and management.

Qualifications

• Strong communication, customer service, time management and organizational skills.
• Bachelor’s Degree or equivalent experience preferred.
• 1-2 years of work experience preferred.
• Intermediate-level Excel skills.
• Extremely well-organized and strong problem-solving skills.
• Self-motivated with strong initiative.
• Experience meeting multiple deadlines simultaneously.

Competencies

• Ensure Effective Communication - Listens carefully and attentively to others' opinions and ideas. Communicates information clearly, concisely, and professionally.
• Establish Trust - Follows through on commitments. Is honest and direct with others. Promotes a culture of respect for, commitment to, and compliance with Company values, beliefs, and standards. Ensures the protection of confidential information.

Boot Barn Benefits & Additional Compensation Opportunities

• Competitive hourly rate
• Merchandise discount: 50% off of Exclusive Brands and 40% off of third-party brands.
• Paid Time Off plan for year-round Boot Barn Partners.*
• Medical, Dental, Vision and Life Insurance.*
• 401(k) plan with generous company matching.
• Flexible schedules and work/life balance.
• Opportunities for growth at every level – we are opening 50+ new stores each year.

*For eligible Boot Barn Partners

PAY RANGE: $27.00 - $35.00/hr.*

*compensation varies based on geography, skills, experience, and tenure

Physical Demands

In general, the following physical demands are representative of those that must be met by a Partner to successfully perform the essential functions of this job. Reasonable accommodations may be made to allow differently abled individuals to perform the essential functions of the job.

• Standing, walking and squatting less than fifty percent of the work shift.
• Required to lift, move and carry up to 40 pounds.
• Ability to read, count and write to accurately complete all documentation and reports.
• Must be able to see, hear and speak in order to communicate with partners and customers.
• Specific vision abilities include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.
• Manual dexterity required using hands to finger; handle, feel and type; reach with hands and arms.

[ ] Sedentary: Limited activity, no lifting, limited walking

[ X ] Light: Office work, some lifting, bending, stooping or kneeling, walking

[ ] Moderate: Mostly standing, walking, bending, frequent lifting

[ ] Arduous: Heavy lifting, bending, crawling, climbing

Work Environment

In general, the following conditions of the work environment are representative of those that a Partner encounters while performing the essential functions of this job. Reasonable accommodations may be made to allow differently abled individuals to perform the essential functions of the job within the environment.

• The workspace is clean, orderly, properly lighted and ventilated with the proper safety compliance.
• Noise levels are considered moderate.

Boot Barn, Inc. reserves the right to make exceptions to modify or eliminate this document or its content. This document supersedes all previous policies, procedures or guidelines pertaining to this subject.

Our core value of community bands us together in supportive and inclusive ways to drive our collective success. Boot Barn provides equal employment opportunity to all applicants and employees without regard to race, color, religion, sex, sexual orientation, age, national or ethnic origin, veteran or military status, disability, as well as any other protected status under the law.

Americans with Disabilities Act (ADA) - Boot Barn will provide reasonable accommodations (such as a qualified sign language interpreter or other personal assistance) with the application process upon your request as required by applicable laws. If you have a disability and require assistance in this application process, please visit your nearest Boot Barn Store or Distribution Center or reach out to Human Resources at 1-949-453-4400, Option 4.

California Privacy Notice

This is more than just a modeling job—it is your gateway to becoming a specialist in Advanced Semiconductor Chemical & Gas Delivery Systems. While you contribute your 1-2 years of site experience, we will provide the platform for you to master the complex logic behind high-purity piping, automated delivery, and international safety codes. You will transition from "building models" to "designing critical infrastructure" for the world's leading tech fabs.

General Responsibilities:

• Architectural & System Modeling: Develop and prepare high-precision 3D architectural and MEP designs using Revit and AutoCAD.
• Integrated Coordination: Collaborate with engineers and PMs to ensure design accuracy, ensuring all process requirements are met.
• Design Evolution: Proactively review and update models to reflect real-time design changes and field adjustments.
• Conflict Resolution: Perform Clash Detection and lead the reporting/solving of spatial discrepancies to ensure a seamless build.
• Team Leadership: Participate in technical meetings and provide progress updates to stakeholders.

Specialized Knowledge & Growth

• P&ID Translation: Read and interpret P&IDs/PFDs (Piping and Instrumentation Diagrams) to align 3D models with functional process logic.
• Subcontractor Management: Act as the technical bridge, communicating 3D model requirements to subcontractors for onsite coordination.
• Advanced System Learning: Gain deep-dive knowledge in Chemical Delivery Systems (CDS) and Gas Delivery Systems (BDS) specifically for advanced semiconductor nodes.

Qualification:

• Minimum Associate Degree in a related engineering or architectural field.

Must Have:

• Software Mastery: Proficiency in BIM software (Revit) and AutoCAD.
• Industry Experience: 1–2 years of experience in design-related work, preferably within the semiconductor or high-tech

Nice to Have:

• Process Piping: Experience with specialized materials like CPVC/PFA, SUS/PFA, and SUS/SUS piping design.
• Electrical & Control: Knowledge of Power/Control system design, including Tray, Conduit, and RSG layouts.
• Standards & Codes: Familiarity with NEC or ASME codes is a significant plus.
• Project Context: Previous involvement in Gas/Chemical-related projects.

What You Will Learn & Achieve

• Semiconductor Expertise: Master the design logic of supply systems that power the world's most advanced chip manufacturing.
• Professional Elevation: Move beyond 3D modeling into Digital Engineering, learning how to manage complex data within a BIM environment.
• Cross-Domain Skills: Gain exposure to mechanical, chemical, and electrical integration, making you a highly versatile asset in the global semiconductor talent market.

Weeks Group, LLC is a leading construction firm specializing in the development of advanced data center facilities. With a strong commitment to innovation, quality, and client satisfaction, we deliver cutting-edge solutions that address the dynamic needs of the data center industry. As we continue to expand, we are seeking a skilled and experienced Data Center Construction QAQC Manager to join our dream team. We are not headhunters. We don't just put butts in seats. We are a dream team of experts in the industry to thrive from solving problems and getting things done!

Weeks Group's Values:

We Answer the Call

Integrity- Honesty-Trust- Nimbleness

We Don’t Take No for an Answer

Persistence- Determination- Accountable

We Solve Problems

We Work Hard and Reward Well

Within Challenging, Intense Projects

We Expect the Best from Each Other

Teamwork- Communication

We BTFM

Innovative- Disdain for Mediocrity

If you don't have data center experience or don't align with our values, no need to apply.

Employment Type: Full-time-Traveling position option

Project Type: Hyperscale / Mission Critical Data Centers – Brownfield (live campus / retrofit / expansion)

Reports To: Project Director / Director of Construction Operations

Role Summary

We’re hiring an On-Site QA/QC Manager to lead the quality program on brownfield hyperscale data center construction—where safety, uptime, and precision matter as much as speed. You’ll own electrical QA/QC planning and execution, drive rigorous documentation, and ensure installations meet strict client standards, contract requirements, and code while working in/around live critical environments. This role supports readiness for energization, commissioning, and IST with strong change control and zero-surprise turnover.

What You’ll Do

• Own and maintain the Project Quality Plan (PQP) tailored for brownfield constraints (phasing, outages, access controls, change control).
• Build and manage electrical Inspection & Test Plans (ITPs), checklists, and hold/witness points—by system, room, and phase.
• Lead daily QA/QC field execution and verification against IFC drawings, approved submittals, vendor IOMs, RFIs, and method statements.
• Drive quality for the electrical critical path, including (as applicable):
• MV/LV distribution: switchgear, transformers, breakers, relays, terminations
• UPS/battery systems: installation verification, clearances, labeling, startup readiness
• Generators/paralleling gear: interface readiness, documentation capture, punch closure
• Busway/PDUs/RPPs: supports, alignment, tap boxes, labeling, grounding/bonding
• Cable tray/conduit: routing, supports, firestopping, separation, workmanship standards
• Grounding & bonding: integrity verification and as-built accuracy
• Controls/EPMS/BMS electrical interfaces: device placement, labeling, point-to-point readiness (as assigned)
• Enforce brownfield-specific quality disciplines:
• Verify phasing plans and temporary power installs meet requirements
• Maintain as-built accuracy in real time due to live site impacts and field changes
• Coordinate quality gates tied to shutdown windows, cutovers, and turnover milestones
• Manage deficiency systems: NCRs, punch lists, rework prevention, corrective/preventive action (CAPA), re-inspections, and verified closeout.
• Partner tightly with Operations, Controls, Commissioning, and Safety to ensure quality supports uptime protection and controlled energization.
• Own electrical turnover packages: inspection reports, test results, redlines/as-builts, O&Ms, training logs, vendor startup documentation, commissioning support documentation.
• Provide weekly reporting: trends, repeat issues, risk register inputs, and 2–6 week quality look-ahead tied to phasing and outage schedules.

Qualifications

• 7+ years QA/QC experience on mission critical construction with strong electrical focus; brownfield/live siteexperience strongly preferred.
• Proven success running PQP/ITP programs, NCR/punch systems, and turnover documentation on fast-track or phased retrofits.
• Strong ability to interpret one-lines, schematics, control wiring diagrams, specs, and vendor documentation.
• Working knowledge of NEC/NFPA 70 and typical hyperscale QA requirements (labeling standards, documentation rigor, readiness gates).
• Highly organized, strong communicator, and able to coordinate across multiple trades, vendors, and stakeholders in a controlled environment.

Preferred

• Experience supporting cutovers, shutdown windows, energization planning, commissioning readiness, and IST
• Familiarity with NFPA 70E-related interfaces and verification of torque/labeling/test documentation programs
• Certifications: CQM-C, ASQ (CQA/CQE), OSHA 30
• Tools: Procore, ACC/BIM 360, Bluebeam, PlanGrid

What Success Looks Like

• Zero “surprise” quality issues during shutdown windows and cutovers
• Electrical systems pass startup/commissioning on first attempt
• NCR/punch stays controlled and closes quickly ahead of milestones
• Turnover packages are complete, accurate, and accepted without rework

Benefits

• Competitive compensation + bonus potential
• Health/dental/vision, 401(k), PTO
• Per diem/vehicle allowance (if applicable)
• Growth path within hyperscale mission critical delivery

Kelly Services is recruiting an Inventory Management Specialist. The role will be in Detroit, MI.

Our customer, DePuy Synthes, part of the Johnson & Johnson Medical Devices Companies, provides one of the most comprehensive Orthopedics portfolios in the world. DePuy Synthes solutions, in specialties including joint reconstruction, trauma, craniomaxillofacial, spinal surgery and sports medicine, are crafted to advance patient care while delivering clinical and economic value to health care systems worldwide.

Commercial Operations and Strategic Enablement is the conduit between the business and the sales organization, enabling sales growth objectives through ensuring appropriate resources are available and balanced throughout the US market. The Sales Network Optimization team minimizes cost to serve while prioritizing customer service levels – allowing the fulfillment of current demand and enable new business.

For more information about the inventory, visit

For more information about the technology, visit Responsibilities

• Manage order fulfillment of exception-based orders coming from the field sales teams including close connection with Courier Service, receiving parties and internal clients
• Proactively solve backorders from our central Distribution Center in partnership with the field sales team to determine which ones need to be fulfilled by the Field Sales Location
• Manage warehouse inventory via close coordination with our central DC
• Perform in bound product verification and put away process for inventory products including, but not limited to the following: scanning inventory, completing inventory transfers in SAP, etc.
• Train and follow standard operation and quality procedures and work instructions
• Performing cycle count and inventory reconciliation activities
• Assists in regular inventory inspections and performs safety and quality audits
• Adherence to training requirements, and health and safety regulations
• Wear protective clothing and equipment as required
• Implement schedule / policies / and group guidelines
• Lead projects as required
• Flexible to other tasks as priorities shift
• Responsible for GDP (Good documentation practices)

Qualifications:

Education:

• Minimum High School and/or equivalent degree
• Bachelor's Degree (a plus, but not required)

Experience and Skills:

Required:

• 2-4 years of relevant work experience
• Inventory / Warehouse Management Software experience
• Experience preferred within any of the following areas: distribution, manufacturing, logistics, supply chain, customer service
• Demonstrated initiative, creativity, assertiveness, and proactive communication
• MS Office Suite proficiency preferred, including (Word, Excel, PowerPoint, and Outlook) Knowledge of Warehouse Management Systems
• Strong Communication skills
• Strong computer skills and ability to utilize specialized software and customized programs to meet business needs
• Flexibility to work a staggered work schedule covering Monday thru Sunday shifts
• Willingness to accommodate changes in the schedule including working in other shifts as per operational needs is required (late or early start)
• Knowledge of Good Manufacturing Practices (GMP) or Good Practices (GxP)

Additional Information:

Kelly Services is an Affirmative Action and Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, or protected veteran status and will not be discriminated against based on disability.

About Alton Lane

Alton Lane is an exciting and fresh face in the menswear space. While we are rooted in heritage, we are built for sustainability, and propelled by industry leading technology and human ingenuity. In 2010, we took the menswear industry by storm with our revolutionary 3D fitting technology. Today, we are able to offer the broadest range of custom tailored menswear with the quickest turnaround time in the market due to our innovative Alton Lane For You technology. Part AI, part algorithm, all parts innovative, our AL4U technology is a true differentiator in the market. To thrive at Alton Lane, you must love innovation.

Headquartered in Richmond, VA, we have 6 showroom locations across the US and a growing presence in top menswear department stores, including Dillard’s, Nordstrom, Saks Fifth Avenue, Macy’s and more.

While we take what we do seriously, we do not take ourselves too seriously. Here at Alton Lane, we regard work as an essential part of life that should be fun. We are quickly expanding and are building our team out with A players. If this is you, please apply!

You’ll learn, develop and grow by serving others, building long-term relationships—with customers and colleagues—and achieving inspiring results. We’re excited to meet you!

Check out our Instagram and company websites to learn more about who we are.

:// Overview: As a District Account Manager for Alton Lane, you will be a key player in Alton Lane’s partnership with one of America’s most successful retailers, Dillard's. You will play a critical role in achieving regional sales growth and enhancing the performance of Alton Lane within Dillard's stores. You will be responsible for onboarding, training and motivating Dillard's store associates onto the Alton Lane For You platform, driving sales initiatives, leading field marketing & merchandising efforts, and providing exceptional customer support across an entire District. Your ability to build strong relationships and navigate complex stakeholders will be essential in ensuring the success of the partnership. This position requires frequent travel within the District.

Responsibilities:

1) Achieve Sales Growth Targets:

Drive Alton Lane District sales growth.

Increase average Alton Lane sales per store.

Ensure Alton Lane sales never fall below a target threshold.

Enhance average Alton Lane sales per associate within your District.

2) Train and Develop Dillard's Store Associates:

Deliver effective training sessions, achieving high satisfaction scores from Dillard’s associates.

Educate Dillard's associates on the value proposition of the Alton Lane brand, product knowledge, and market leading technology.

Identify super users per store, partner in their training program, and engage in their training to create advocates for Alton Lane.

Develop a target number of super users who outperform the average associate in terms of sales.

3) Lead Sales Initiatives within the District:

Motivate and influence Dillard's store associates to prioritize Alton Lane and increase sales.

Help develop sales tools, ongoing support tactics, and innovative ideas to educate and motivate Dillard’s store associates.

Partner to create a District promotion calendar, District sales initiatives, and execute them to achieve a targeted sales lift percentage period over period.

Identify best practices across the District and share them with all stores.

Regularly visit stores, establish a strong presence, and build relationships with Dillard's sales associates.

To Alton Lane, Dillard’s is family. Building and fostering this level of relationship with your District is key to your success.

4) Lead Field Marketing Efforts:

Partner with Alton Lane’s internal team for marketing and sales collateral, including promotional and educational materials for the District.

Increase Alton Lane brand awareness among menswear associates and Dillard's customers.

Differentiate the Alton Lane brand from competitors within Dillard's.

Conduct competitive intelligence to stay informed about competing brands, promotions, and estimated performance in the District.

Understand the Alton Lane/Dillard's consumer, decision drivers, and value proposition.

5) Provide Exceptional Dillard's Customer Support:

Be highly accessible and responsive to all Dillard's requests.

Address all Dillard’s initiated questions within the same working day.

Be the best advocate you can be for your entire Dillard’s District team.

6) Navigate Complex Stakeholders:

Effectively navigate the Dillard's structure, building strong relationships with the District Director, store managers and sales associates alike.

Act as a connector and conduit between Alton Lane corporate and Dillard's, prioritizing the customer while maintaining alignment with company objectives.

Cultivate strong and trusting relationships with Alton Lane & Dillard’s stakeholders alike.

Qualifications:

Bachelor's degree in business, marketing, or a related field (or equivalent experience).

Proven experience in sales, training, field marketing, or related roles.

Strong understanding of the retail industry, particularly menswear.

Excellent communication and presentation skills.

Ability to motivate and influence others.

Exceptional problem-solving and decision-making abilities.

Strong organizational and time management skills.

Flexibility to travel frequently within the region.

Ability to build and maintain strong relationships with stakeholders.

Self-motivated, proactive, and results-oriented.

Join our team and contribute to the growth and success of Alton Lane's partnership with Dillard's. We offer a competitive compensation package, comprehensive benefits, and opportunities for professional development and advancement. Apply now to be a part of our dynamic and customer-focused organization.

Description -

Position Summary

The Quality Control (QC) Coordinator is responsible for ensuring all telecom construction projects meet company standards, client specifications, and regulatory requirements. This role supports field operations by coordinating inspections, maintaining quality documentation, identifying deficiencies, and ensuring corrective actions are implemented in a timely manner.

The QC Coordinator plays a key role in maintaining compliance with client standards, safety requirements, and industry best practices across fiber, wireless, and outside plant (OSP) construction projects.

Key Responsibilities

Quality Assurance & Compliance

• Implement and maintain project-specific Quality Control Plans.
• Ensure work complies with client standards, engineering drawings, and telecom specifications.
• Monitor adherence to local, state, and federal regulations.
• Conduct internal audits of field construction activities.

Field Inspections & Documentation

• Perform site inspections for fiber, OSP, and wireless installations.
• Verify construction quality for trenching, conduit placement, handholes, splicing, tower work, and equipment installation.
• Document findings with photos and detailed reports.
• Track and close out punch list items.

Coordination & Communication

• Serve as liaison between field crews, project managers, and clients regarding quality issues.
• Coordinate third-party inspections when required.
• Assist with customer audits and compliance reviews.
• Support turnover package preparation and closeout documentation.

Deficiency Management

• Identify non-conforming work and issue corrective action notices.
• Follow up to ensure deficiencies are resolved.
• Maintain quality tracking logs and reporting dashboards.

Reporting & Record Keeping

• Maintain accurate records of inspections, test results, and corrective actions.
• Compile daily/weekly quality reports.
• Assist with as-built documentation review and verification.

Required Qualifications

• 3+ years of experience in telecom construction (fiber, OSP, or wireless).
• Strong understanding of telecom construction standards and practices.
• Ability to read and interpret construction drawings and specifications.
• Experience conducting field inspections and documenting findings.
• Proficiency in Microsoft Office (Excel, Word, Outlook).
• Strong organizational and communication skills.
• Valid driver’s license and ability to travel to job sites.

Preferred Qualifications

• Experience with major telecom providers (e.g., AT&T, Verizon, T-Mobile).
• Knowledge of fiber testing (OTDR, power meter testing).
• Familiarity with OSHA standards and safety compliance.
• Experience with quality management systems (QMS).
• Certification in Quality Control or Construction Management (preferred but not required).

Core Competencies

• Attention to detail
• Problem-solving and analytical thinking
• Time management and prioritization
• Strong documentation skills
• Ability to work independently and in a team environment

Physical Requirements

• Ability to walk construction sites and navigate uneven terrain.
• Ability to lift up to 50 lbs.
• Ability to work outdoors in various weather conditions.

Work Environment

• Combination of field and office settings.
• Frequent travel to active construction sites.
• Fast-paced environment with multiple concurrent projects

Our client manufactures tools for electrical contractors including cable pullers, conduit benders, and knockout sets. The company has experienced strong recent growth, quickly doubling its headcount to approximately 20 employees. As demand continues to increase, the team plans to continue expanding at a steady, sustainable pace.

Position Overview

Our client is seeking a Production Supervisor to lead second shift manufacturing operations. This role owns the execution of shift operations, ensuring production, quality, staffing, and workflow run effectively throughout the shift.

This position requires a hands-on leader capable of managing daily manufacturing operations with a high level of independence while maintaining strong leadership, professionalism, and accountability across the team.

Work Schedule

• Monday – Thursday
• 3:00 PM – 1:00 AM
• 1-hour paid dinner break

Key Responsibilities

• Own execution of second shift manufacturing operations
• Ensure production schedules, quality standards, and output targets are met
• Lead and develop a growing production team across multiple departments
• Coordinate daily production activity to keep operations running efficiently
• Make real-time decisions to resolve production, staffing, or workflow issues
• Hold team members accountable for performance, quality, and safety
• Identify opportunities to improve workflow, efficiency, and production output
• Maintain a safe and organized production environment
• Track production performance and communicate updates to leadership
• Enforce company policies and maintain consistent operational standards

Qualifications

• Experience supervising production teams in a metal fabrication or machining environment
• Experience managing shift-level manufacturing operations in a production setting
• Ability to make operational decisions and resolve production or workflow issues
• Understanding of manufacturing processes, workflow management, and safety standards
• Strong leadership presence and professionalism managing production teams
• Strong communication, problem-solving, and organizational skills

Benefits

• Health, Dental, and Vision Insurance
• Short- and Long-Term Disability
• Life Insurance
• 3 Weeks PTO plus Holidays
• 401(k) with Profit Sharing
• Tuition Reimbursement

Looking for a hands-on Electrical Trainer to develop electricians and apprentices in industrial and commercial environments. This role is ideal for a Foreman, Lead, or Senior Electrician ready to transition out of full-time field work into training and mentorship.

What You’ll Do

• Deliver hands-on training (conduit, transformers, wiring, power distribution)
• Teach NEC code and electrical safety (NFPA70E)
• Run practical skill assessments based on real job scenarios
• Track training progress, certifications, and hours (LMS/admin work ~20–25%)
• Coach and mentor apprentices and journeymen
• Build and refresh training exercises to reflect field conditions

What You Bring

• 7-15+ years in industrial or commercial electrical work
• Experience as a Foreman, Lead, or supervising electricians
• Strong knowledge of electrical systems, materials, and best practices
• Bilingual (English/Spanish)
• Ability to train, lead, and hold accountability in a classroom/shop setting

Nice to Have

• Prior training or teaching experience (formal or on-the-job)
• NCCER or similar certifications
• Data center or mission-critical project experience
• Industrial/manufacturing training background