Cas Jobs in Usa
3,201 positions found — Page 3
Date Posted:
2026-02-13Country:
United States of AmericaLocation:
US-AZ-TUCSON-M10 ~ 3360 E Hemisphere Loop ~ BLDG M10Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
Raytheon is seeking a Senior Electrical Engineer to join our team as an Electrical Computer Aided Designer Engineer (ECAD).Our Mission is to develop best in industry technologies that align product capabilities to the needs of our customer. We will empower our people to leverage design commonality and innovation, balancing risk and rigor, to achieve predictable and affordable solutions. We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today’s cutting-edge technology.
This position is an onsite role, located in Tucson, AZ.
What You Will Do:
Responsible for Printed Circuit Board (PCB) designs from conception to manufacturing
Creation of the PCB, Circuit Card Assembly (CCA), and Schematic drawings for suppliers
Schematic Capture, Component Placement, Routing of Traces, Gerber/ODB++ file creation
Utilize software such as Siemens: Xpedition Enterprise and DownStream Technologies: BluePrint-PCB
Design layouts include Rigid, Flex, and Rigid-Flex assemblies
Work designs to include full designs, re-spins, drawing updates, change notices, copper changes, and process improvement projects within and outside own discipline
Daily interface with various engineering levels along with different engineering disciplines including, but not limited to Electrical, Mechanical, Components, Test, and Producibility Engineering disciplines to ensure that the overall design requirements are captured, keeping cost, cycle time, and producibility in mind
Qualifications You Must Have:
Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience to include any combination of the following:
Experience with PCB manufacturing or CCA manufacturing principles that affect circuitry and component layout with RF specific layout techniques
Experience with the electrical design process including RF layout
Experience with laying out Rigid, Flex, or Rigid-Flex boards
Experience with multi-layer board design
Qualifications We Prefer:
Working knowledge of Analog, Digital including DDR, specific experience with RF, Power, and mixed technology, including multi-layer designs with High Density Interconnect (HDI) technology
Technical PCB design skills using the Siemens design toolset including, but not limited to the Xpedition Layout tool suite with working knowledge of schematic capture, placement, routing, use of the auto-router, constraint manager, and library tools, and use of BluePrint to create complex PCB and CCA drawings, Altium is not used, but transfers over well to the Siemens toolset
Export manufacturing data in both Gerber and ODB++ formats
Use of Valor NPI, Design for Manufacturing rule sets, other Design Rule Checking software
Able to understand and interpret drawings as they relate to PCB’s and CCA’s
Familiarity with IPC 6012 & IPC 6013
Working knowledge of military and commercial design standards, GD&T techniques, and overall producibility considerations related to electronic packaging
Knowledge of RF circuitry and key care abouts when it come to laying out the board along with filter knowledge
Working knowledge of operating system concepts and implementations, network services as related to Microsoft Windows suites
Willingness to work extended hours (nights and/or weekends) as required to complete assigned tasking
Active Secret DoD security clearance
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
This position offers relocation based on candidate eligibility.
Learn More & Apply Now!
This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
#LI-CV1
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Date Posted:
2026-02-13Country:
United States of AmericaLocation:
US-AZ-TUCSON-M10 ~ 3360 E Hemisphere Loop ~ BLDG M10Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
Raytheon is seeking a Senior Electrical Engineer to join our team as an Electrical Computer Aided Designer Engineer (ECAD).Our Mission is to develop best in industry technologies that align product capabilities to the needs of our customer. We will empower our people to leverage design commonality and innovation, balancing risk and rigor, to achieve predictable and affordable solutions. We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today’s cutting-edge technology.
This position is an onsite role, located in Tucson, AZ.
What You Will Do:
Responsible for Printed Circuit Board (PCB) designs from conception to manufacturing
Creation of the PCB, Circuit Card Assembly (CCA), and Schematic drawings for suppliers
Schematic Capture, Component Placement, Routing of Traces, Gerber/ODB++ file creation
Utilize software such as Siemens: Xpedition Enterprise and DownStream Technologies: BluePrint-PCB
Design layouts include Rigid, Flex, and Rigid-Flex assemblies
Work designs to include full designs, re-spins, drawing updates, change notices, copper changes, and process improvement projects within and outside own discipline
Daily interface with various engineering levels along with different engineering disciplines including, but not limited to Electrical, Mechanical, Components, Test, and Producibility Engineering disciplines to ensure that the overall design requirements are captured, keeping cost, cycle time, and producibility in mind
Qualifications You Must Have:
Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience to include any combination of the following:
Experience with PCB manufacturing or CCA manufacturing principles that affect circuitry and component layout with RF specific layout techniques
Experience with the electrical design process including RF layout
Experience with laying out Rigid, Flex, or Rigid-Flex boards
Experience with multi-layer board design
Qualifications We Prefer:
Working knowledge of Analog, Digital including DDR, specific experience with RF, Power, and mixed technology, including multi-layer designs with High Density Interconnect (HDI) technology
Technical PCB design skills using the Siemens design toolset including, but not limited to the Xpedition Layout tool suite with working knowledge of schematic capture, placement, routing, use of the auto-router, constraint manager, and library tools, and use of BluePrint to create complex PCB and CCA drawings, Altium is not used, but transfers over well to the Siemens toolset
Export manufacturing data in both Gerber and ODB++ formats
Use of Valor NPI, Design for Manufacturing rule sets, other Design Rule Checking software
Able to understand and interpret drawings as they relate to PCB’s and CCA’s
Familiarity with IPC 6012 & IPC 6013
Working knowledge of military and commercial design standards, GD&T techniques, and overall producibility considerations related to electronic packaging
Knowledge of RF circuitry and key care abouts when it come to laying out the board along with filter knowledge
Working knowledge of operating system concepts and implementations, network services as related to Microsoft Windows suites
Willingness to work extended hours (nights and/or weekends) as required to complete assigned tasking
Active Secret DoD security clearance
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
This position offers relocation based on candidate eligibility.
Learn More & Apply Now!
This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
#LI-CV1
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Join the Team! Is technology your passion? Do you want to work with smart, forward-thinking individuals? Do you want to grow in a career you love? At Align, our professionals are the key to our success.
We dont just hire talent, we invest in exceptional people who are forward-thinking, results-driven, and passionate about what they do.
Were a group of tech-savvy professionals who are motivated by making an impact.
Our culture is one of unbounded opportunity that celebrates the passions, skills and ideas of our teamwork hard, play hard, be smart! We believe great communities lead to great companies.
Thats why we offer a dynamic workplace where you feel inspired, engaged and innovative.
We offer professionals opportunities to train in the leading technologies, make an impact within the industry and acquire valuable new skills whether on client sites or in one of our regional offices.
Position Overview As an Associate Data Center Cabling Superintendent, you will support large-scale cabling installations for major AI and hyperscale data centers across the U.S.
This hybrid role blends field leadership with hands-on work, ideal for someone who has grown beyond a Foreman role but is not yet a full Superintendent.
Youll assist the Superintendent with planning, standards enforcement, and on-site execution while working directly with technicians, contractors, and vendors.
This role is heavily field-facing and requires strong technical skills, attention to detail, and the ability to help keep teams aligned with project timelines and quality expectations.
This is a full-time salaried role offering $90,000-$115,000, full benefits, project bonuses, paid travel, and advanced training.
This role is open in all hiring-authorized U.S.
states (AZ, AR, CA, CO, CT, DC, DE, FL, GA, IL, IA, MD, MA, MI, MO, NH, NJ, NY, NV, NC, OH, PA, RI, SC, TN, TX, UT, VT, VA, WA, WI).
Preferred hiring regions: AZ, VA, NJ, NY, and TX.
This position requires 50%-70% travel to project sites nationwide, including AI build locations.
Key Responsibilities Support structured cabling installations in new data center white space and help coordinate daily work for cabling crews under the Superintendent.
Perform on-site QA checks for fiber/copper terminations, labeling, routing, and test results while reinforcing jobsite safety.
Assist with cabling standards, tracking sheets, patch schedules, port maps, and drawing reviews to ensure work meets TIA/BICSI specifications.
Communicate field progress, schedule risks, and material needs to project leadership.
Support documentation, RFIs, change orders, daily reports, and QA/QC corrective actions.
Required Qualifications 2-4 years experience in structured cabling, low-voltage, or fiber optic systems (data center or mission-critical preferred).
Experience leading small cabling crews (foreman or lead technician level).
Ability to read cabling drawings, rack elevations, and labeling standards.
Experience using fiber testing tools (OLTS, OTDR, VFL).
Strong Excel skills for port mapping, tracking, and documentation.
Comfortable working in live data center environments with fast-paced schedules.
Willingness to travel 50-70% and work extended hours during active builds Preferred Qualifications Experience supporting data center cabling deployments.
Understanding of racks, containment systems, and cable pathways.
Familiarity with TIA/EIA or BICSI standards.
Certifications such as BICSI Technician or Installer II.
To support a fair, consistent, and high-quality hiring experience, some interviews may be recorded.
These recordings help our team focus fully on the conversation at hand, rather than note-taking, and allow us to better evaluate and improve our recruitment process.
Recordings are used solely for internal purposes such as training, quality assurance, and process improvement.
Candidates will be informed in advance and asked to provide consent before any recording takes place.
PM26 Align is a premier global provider of technology infrastructure solutions.
Align specializes in designing and deploying technology infrastructure solutions from the data center to the desktop as well as providing managed IT services for clients.
Our professional services team, which includes Data Center Solutions , provide strategic consulting, design, project management, engineering, implementation and support.
Our best-in-class Managed Services team provides IT services and cybersecurity advisory for clients within the Alternative Investment industry.
Align is a Microsoft Tier 1 Cloud Solutions Provider (CSP) and Gold Partner.
Our client centric approach and passion for driving IT innovation has enabled us to provide tailored solutions and business transformations for over three decades.
Leading firms have relied on Align to provide forward-thinking technology strategies that support their current and future business needs.
Our teams have flawless track records of delivering technical solutions and have established long-standing relationships with an impressive client list of both Global 1000 and SMB clients.
We work across a diverse list of industries including financial services, life sciences (pharmaceutical and health care), retail, technology, media and telecommunications.
For more information, visit: PI81c1083bdd7a-25448-39863216
- 2:00 PM
- Monday to Friday PRIMARY FUNCTION: State the primary function or overall purpose of your position.
Reports to the Quality Supervisor or designated authority.
Responsible for performing in-process and/or outbound dimensional and visual inspections of component parts, assemblies, and sub-assemblies as required.
ESSENTIAL FUNCTIONS: List the essential functions (i.e.
key responsibilities with expected end results) which must be accomplished in order to fulfill the purpose of your position as described above.
Inspects (receiving, in-process and outbound) aerospace component parts, sub-assemblies and/or assemblies visually and dimensionally for conformance to manufacturing drawings, quality control specifications and supplier/customer requirements.
Other duties and/or responsibilities may be performed as part of cross-training or employee development plan.
Responsible for review and acceptance of paperwork and documentation used in the acceptance of product.
Responsible to produce necessary manual or computer generated inspection reports to accept or reject products.
Inspection involves using measurement equipment such as, but not limited to, calipers, micrometers, pin gages, thread plugs, thread ring gages, surface plates, and optical comparator.
Completes data processing move transactions as required.
Possesses basic understanding of geometrical tolerancing and dimensional measurements per ASME Y14.5.
Possesses in-depth knowledge of AQL sampling selection per internal procedures or ANSI/ASQC Z1.4 or as directed by customers.
Possesses minimum of five years of experience in first article inspection reports per AS9102.
Possesses in-depth knowledge of acceptance test procedures (ATP), acceptance test reports (ATR), job travelers (process plans), pick lists, drawings, procedures, C of Cs, chemical & physical analysis reports, and test reports.
Experience working in FAA environment.
In-depth knowledge of DFAR and Nadcap requirements.
Basic knowledge of customers DQCR/DSQR programs and website portals.
Evaluates and adheres to all flowed down contractual (internal and external) requirements of customer purchase orders, suppliers purchase orders for commercial and/or military products.
BASIC QUALIFICATIONS: High school diploma or General Education Degree (GED).
Five years minimum related experience or training; or equivalent combination of education and experience in mechanical inspection of aerospace products.
Relocation is not offered for this role.
Candidates must reside within a 50 mile distance of the Los Angeles, CA facility (zip code 90039) to be considered.
This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR).
All applicants must be U.S.
persons within the meaning of ITAR.
ITAR defines a U.S.
person as a U.S.
Citizen, U.S.
Permanent Resident (i.e.
'Green Card Holder'), Political Asylee, or Refugee POSITION CRITERIA: Attendance/Punctuality/Dependability
- Is consistently at work and on time; Uses time efficiently; follows instructions; commits to long hours of work when necessary to achieve goals.
Able to work efficiently under fast pace environment.
Quality/Quantity
- Demonstrates accuracy and thoroughness; meets productivity standards; completes work in timely manner Safety and Security
- Follows safety procedures; reports potentially unsafe conditions; uses equipment and materials properly.
Technical Skills
- Pursues training and development opportunities; strives to continuously build knowledge and skills.
Oral Communication Speaks English clearly and listens and gets clarification when needed; participates in meetings.
Written Communication
- Presents numerical data in a legible manner; able to read and interpret written information.
Teamwork
- Treats colleagues, suppliers, internal, and external customers with respect; contributes to building a positive team spirit; supports everyone's efforts to succeed.
Organizational Support Follows all policies and procedures; upholds organizational values.
Must be highly motivated and committed to high quality standards.
Professionalism
- Approaches others in a tactful manner; treats others with respect and consideration; accepts responsibility for own actions.
Language Skills
- Ability to read and interpret documents in English such as safety rules, operating and maintenance instructions, and procedure manuals.
Ability to complete routine documentation.
Ability to speak clearly and effectively with Manager/Supervisor, coworkers, customers, suppliers, etc.
Mathematical Skills
- Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
Reasoning Ability
- Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.
Computer Skills
- Knowledge of Microsoft Office (Excel, Word, Outlook), internet, etc.
PREFERRED QUALIFICATIONS: Knowledge or experience inspecting various types of materials (e.g., aluminum, alloy, titanium, stainless steel, etc.).
Knowledge or experience inspecting aerospace products with coatings (e.g., anodizing, cadmium plating, chromium plating, nickel plating, zinc plating, passivation, etc.).
College or ASQ (American Society for Quality) certification a plus.
Experience working in FAA environment
This role focuses heavily on maintaining patient safety, regulatory compliance, and flawless execution within highly regulated environments.
Key Responsibilities Execute warehouse processes related to receiving inbound goods with high accuracy and adherence to quality and safety standards.
Support customs and import-related activities, perform required quality inspections, and maintain environmental product controls.
Accurately update all inbound transactions in the Warehouse Management System (WMS) or ERP system.
Perform stock counts, stock verifications, stock adjustments, and manage stock movements.
Ensure compliance with bonded storage rules, special storage zones, temperature-controlled areas, and finance-related controls.
Maintain high inventory accuracy by participating in cycle counts and resolving discrepancies promptly.
Pick, pack, label, and ship outbound orders in compliance with quality, safety, and customer-specific requirements.
Support customs/export processes and quality inspections for outbound shipments.
Record all outbound-related transactions in the WMS or ERP systems.
Assist maintenance technicians with equipment troubleshooting, calibration, and resolving recurring technical issues.
Transport goods safely using forklifts or other material-handling equipment while adhering to all safety protocols.
Contribute to the installation and configuration of new warehouse technologies and systems, following manufacturer instructions.
Support the implementation of safety protocols, ensuring team members adhere to established procedures.
Maintain accurate records of equipment maintenance, inspections, and safety checks.
Assist in optimizing warehouse space and improving picking/packing workflows.
Aid in order fulfillment coordination by prioritizing orders and collaborating with logistics teams to ensure timely deliveries.
Adapt to changing operational needs and follow all established warehouse guidelines.
Education: High School Diploma or Vocational Education
- Fully Remote 3 Months Contract Equipment will be provided to candidates
- local candidates only.
Work hours: 8 – 4:30 PM PST Responsibilities: Assist in the administration of HR systems and programs.
Recommend strategies for implementing new systems.
Provide input into development and modification of HR department workflows and systems.
Support end users throughout the enterprise for HR systems including HRIS, LMS, ATS, Time & Attendance, and Document Management.
Maintain daily operations and monitor all HR systems to ensure processes are functioning properly and timely.
Collaborate with HR Systems team, IT, and Campus HRIT to support and leverage HR system solutions.
Design and deliver reporting solutions, including system interfaces, ad hoc reporting, scheduled reports, and dashboards.
Work closely with end users and SMEs to ensure data integrity and optimization within the LMS.
Manage projects, system integrations, and upgrades.
Assist with running reports, creating/maintaining spreadsheets to measure department metrics, and creating PowerPoint presentations for training.
Requirements: Bachelor’s Degree in Human Resources Management, Business Administration, or related field.
5 years experience in Human Resources, HRIS, or an equivalent field can substitute for the Bachelor’s degree.
Required Skills: Proficient in MS Office, Outlook, HRMS, and LMS Systems.
Highly proficient verbal and written communication skills.
Capable of communicating with all levels.
Critical thinking, analytical, and creative skills.
Preferred Skills: Experience with Workday, Health Stream, Cornerstone, Kronos, or Document Management Systems.
Experience in a hospital setting.
HR Certification preferred.
Remote working/work at home options are available for this role.
- $100/HR.
TOP THINGS: 1) Change Management, 2) RFID technology deployment, and 3) Experience in telecom
**LOCAL CANDIDATES ONLY
* The role is hybrid but expect to work primarily at the three yards in San Jose, Cupertino, and San Carlos.
The travel requirement will be 80% of time to work in the yards to work closely with the technicians, material leads and others.
Mainly overseeing the yard activities at the 3 yards and the RFP activities at other yards located in the Bay Area.
Description: Engage with field technicians and material leads daily to develop and implement workflows around gas and electric meter check-in and check-out processes.
Work with the software vendor to make changes to the App based on technician feedback and changing workflows.
Ensure RFID readers, antennas and RFID handheld readers are in good working order and coordinate with internal and external partners for continuous improvement opportunities.
Work with metering OEMs to ship new meters with RFID labels and lead the existing meter tagging effort in the 3 yards.
Be main point of contact for RFP related activities and yard expansion to San Carlos in H2 2026.
Take ownership of teams aggressive and expansive milestones and consistently help the team excel in tasks outlined in crawl, walk, and run phases of the project.
Safety: Maintain an absolute commitment to the safety of self and co-workers.
Actively look for and resolve unsafe situations.
Promote safety awareness and education among team members.
Minimum Qualifications BS Exceptional analytical and technical ability Excel, PowerBI, and other reporting skills Ability to manage time-sensitive priorities Track record of meeting and/or exceeding business commitments and experience in change management Strong initiative, teamwork, accountability for results, customer focus, and sound judgment Project management or engineering experience Desired Qualifications Professional Engineer or Project Management Professional License 5 years post-graduate engineering or project management experience Operations experience and new technology deployment experience TOP THINGS: 1) Change Management, 2) RFID technology deployment, and 3) Experience in telecom
- 5 PM | Pay: 35/hr Position Summary The Supply Planner is responsible for managing end to end supply chain planning activities while maintaining strong partnerships with Commercial organizations, Business Groups, Manufacturing teams, and suppliers.
This role ensures product availability, accurate planning data, and optimal inventory levels through proactive analysis, scenario planning, and execution of key supply chain and production planning processes.
Responsibilities End-to-End Supply Planning Manage relationships with Commercial teams, Business Groups, Manufacturing teams, and suppliers to ensure seamless supply chain operations.
Maintain accurate master data in SAP and JDA/BlueYonder systems to support rule based planning.
Execute PDLM phase in/phase out planning activities.
Lead the monthly S&OP Supply Review, defining and reviewing mid and long term supply plans.
Master Production Schedule (MPS) & Detailed Scheduling Plan, control, and maintain the short term Master Production Schedule (MPS), balancing customer demand and inventory levels.
Collaborate with Production Planners to ensure a feasible and constrained MPS, taking into account equipment and labor capacity.
Support creation of weekly simulation versions of the MPS/DPS for scenario evaluation.
Align with Operations/Production teams to minimize changeover times and maintain optimized production sequences.
Capacity & Constraint Management Identify capacity constraints during MPS creation and communicate issues proactively to Production Planning teams.
Evaluate constrained MPS outputs against installed production capacity to ensure feasibility.
Material Requirements & Inventory Support Support MRP processes by ensuring accurate demand signals flow into production scheduling.
Coordinate with operational buyers and factory planning teams on material shortages, planned orders, and replenishment triggers.
Monitor stock levels for finished, semi finished, and raw materials to ensure alignment with production needs.
Production Planning Review weekly frozen week production schedules jointly with production and OMM teams and ensure updates are accurately reflected in SAP.
Ensure production plans are feasible based on latest constraints and fully synchronized with upstream demand and downstream commitments.
Allocation & Risk Management Make allocation proposals when the order book exceeds production capacity or material availability.
Perform scenario mapping and root cause analysis to mitigate supply and production risks.
Build allocations and constraint based strategies that protect customer service levels.
Operational Excellence Drive key performance indicators such as CSL Availability, CSP, SRM, SRMS, DPMA, and inventory health metrics (inventory as % of MAT sales, excess & aging stock).
Support factory level KPIs including CLIP, LAP, MIP, and PIPO execution.
Support Blueheart/BlueYonder manual PO process during transition to automation.
Qualifications Education & Experience Bachelor’s degree in Supply Chain, Industrial Engineering, Operations, Business, or related field; Master’s preferred.
3–5+ years in supply planning and production planning roles with exposure to S&OP, MPS, PDLM, and PIPO processes.
Technical Skills Proficiency in SAP for MPS, MRP, routing, and production schedule alignment.
Experience with JDA/BlueYonder for advanced rule based supply and production planning.
Strong Excel and data visualization skills.
Ability to support manual PO workflows during system transitions.
Planning Expertise Experience generating or supporting constrained and unconstrained MPS cycles and evaluating capacity fit.
Skilled at integrating production schedules with supply plans, ensuring smooth alignment between demand, supply, and factory operations.
Ability to lead S&OP supply reviews and represent supply plans in cross-functional forums.
Analytical & Problem Solving Strong capability in scenario planning, root cause analysis, and constraint based decision making.
Demonstrated ability to improve operational KPIs such as CLIP, LAP, MIP, and PIPO.
Stakeholder Collaboration Works effectively with Production Planning, OMM, Operations Management, OEM suppliers, and Commercial & Business Groups.
Able to communicate capacity risks, supply scenarios, and production impacts clearly in S&OP and SteerCo meetings.
Cover areas such as academic recruitment, appointment, and advancement; compensation and salary administration; welfare programs; visa procurement; benefits; payroll; training and development; academic personnel misconduct; equity; labor and employee relations issues.
Resolve moderate to complex academic personnel and HR-related issues affecting a broad range of academic titles in imaginative and practical ways.
Serve as the primary academic contact for a set of client departments.
Requirements: HR Generalist experience, including employee lifecycle management (onboarding, managing payroll, employment issues, offboarding, etc.).
Experience in an Academic/University setting.
Required Skills: Experienced professional with in-depth understanding of the professional field.
Ability to independently perform the full range of responsibilities within the function.
Possesses broad job knowledge and can analyze problems/issues of diverse scope to determine solutions.
Comprehensive understanding of UC, campus, and unit academic practices, policies, and procedures.
About Us
One Medical is a primary care solution challenging the industry status quo by making quality care more affordable, accessible and enjoyable. But this isn't your average doctor's office. We're on a mission to transform healthcare, which means improving the experience for everyone involved - from patients and providers to employers and health networks. Our seamless in-office and 24/7 virtual care services, on-site labs, and programs for preventive care, chronic care management, common illnesses and mental health concerns have been delighting people for the past fifteen years.
In February 2023 we marked a milestone when One Medical joined Amazon. Together, we look to deliver exceptional health care to more consumers, employers, care team members, and health networks to achieve better health outcomes. As we continue to grow and seek to impact more lives, we're building a diverse, driven and empathetic team, while working hard to cultivate an environment where everyone can thrive.
Employment type:
- "Casual Employee" (per diem, hourly clinician role)
- 8-23 patient care hours per week
What you'll be working on:
- Seeing patients with a broad array of patient needs; conducting a mix of acute, chronic, and well visits (not a panel-building role)
- Treating patients in-office as well as conducting occasional tele-health visits
- Ongoing collaboration with in-office teammates via daily huddles, as well as with virtual clinical teams
- Utilization of your specific clinical training and opportunities to perform in-office procedures
- Willing to obtain additional state licensure and credentialing for One Medical virtual primary care in additional states
Education, licenses, and experiences required for this role:
- Enrolled in, or have completed, an accredited Internal or Family Medicine residency program
- Practiced at least 2 of the last 5 years in an outpatient primary care setting
- Board Certified in Family Medicine or Internal Medicine. If not yet Board Certified, must presently be a Board Eligible Family Medicine or Internal Medicine Resident, or have completed a Family Medicine or Internal Medicine Residency Program within the last calendar year and scheduled to take the next available Board Exam
- State licensed in California, obtained before your One Medical start date
One Medical providers also demonstrate:
- A passion for human-centered primary care
- The ability to successfully communicate with and provide care to individuals of all backgrounds
- The ability to effectively use technology to deliver high quality care
- Clinical proficiency in evidence-based primary care
- The desire to be an integral part of a team dedicated to changing healthcare delivery
- An openness to feedback and reflection to gain productive insight into strengths and weaknesses
- The ability to confidently navigate uncertain situations with both patients and colleagues
- Readiness to adapt personal and interpersonal behavior to meet the needs of our patients
Casual/Per Diem Providers receive:
- Malpractice Insurance - Malpractice fees to insure your practice at One Medical is covered 100%
- UpToDate Subscription - An evidence-based clinical research tool
- One Medical Issued laptop (to allow for secure access to our EHR)
- Sick Time PTO eligible in accordance with local requirement
This is an hourly role based based in Palo Alto, CA and surrounding offices.
One Medical is committed to fair and equitable compensation practices.
The hourly rate for this role is $177.00. Final determination of starting pay may vary based on factors such as practice experience and patient care schedule. Additional pay may be determined for those candidates that exceed these specified qualifications and requirements. The total compensation package for this position may also include benefits. For more information, visit Medical offers a robust benefits package designed to aid your health and wellness. All regular team members working 24+ hours per week and their dependents are eligible for benefits starting on the team member's date of hire:
Taking care of you today
- Paid sabbatical for every five years of service
- Free One Medical memberships for yourself, your friends and family
- Employee Assistance Program - Free confidential services for team members who need help with stress, anxiety, financial planning, and legal issues
- Competitive Medical, Dental and Vision plans
- Pre-Tax commuter benefits
- PTO cash outs - Option to cash out up to 40 accrued hours per year
Protecting your future for you and your family
- 401K match
- Credit towards emergency childcare
- Company paid maternity and paternity leave
- Paid Life Insurance - One Medical pays 100% of the cost of Basic Life Insurance
- Disability insurance - One Medical pays 100% of the cost of Short Term and Long Term Disability Insurance
In addition to the comprehensive benefits package outlined above, practicing clinicians also receive
- Malpractice Insurance - Malpractice fees to insure your practice at One Medical is covered 100%.
- UpToDate Subscription - An evidence-based clinical research tool
- Continuing Medical Education (CME) - Receive an annual stipend for continuing medical education
- Rounds - Providers end patient care one hour early each week to participate in this shared learning experience
- Discounted rate to attend One Medical's Annual REAL primary care conference
