Carson Senior High School Transcripts Jobs in Usa

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.

Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor.

Principal Duties/Responsibilities:

· Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools.

· Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment.

· Independently performs maintenance as per industry standards.

· Works with customer counterparts to optimize maintenance, reliability, and preventative maintenance procedures.

· May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks.

· Conforms and complies with customer contractor codes of conduct, housekeeping standards, and safety processes

· Documents work performed in service reports, applicable management systems, and written explanation regarding observation and collected equipment performance data.

· Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development.

· Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems.

· Utilizes advanced maintenance technologies to collect equipment performance data. Observes trends and makes recommendations.

· Completes and conducts on-the-job training and technical self-study programs for career development.

· Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions.

Knowledge, Skills, Abilities (KSAs), & Competencies:

Essential KSAs:

· High School Graduate or equivalent (GED).

· Associates degree with a Technical focus and 10 years of related experience in specific industry; or, 12 years of experience in specific industry.

· Possesses comprehensive understanding of electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs.

· Must be able to use basic hand tools and specialized tools as appropriate.

· Extensive travel required. (Local, National, International)

Desirable KSAs:

· Experience in condition based maintenance techniques, precision mechanical alignments, and maintenance of applicable process equipment.

· Experience in programmable logic controllers, field device troubleshooting, and maintenance of electrical drive and motor systems.

Competencies:

· Communications

· Customer Focus

· Personal Discipline

· Safety

Physical Demands and Working Conditions:

While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors.

ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more.

Pay Range$38.76—$49.62 USD

ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.

ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Job Title: Lead Nuclear Medicine Tech

Employment Type: Full-time

Shift: Day Shift (Monday-Friday)
Location: Nazareth Hospital - Philadelphia, PA

Position Purpose

The Lead Nuclear Medicine Tech involves technical work in the operation of complex nuclear medicine and PET/CT equipment. Performs all duties as described in the Society of Nuclear Medicine and ARRT, Scope of Care for Nuclear Medicine/PET/CT Technology. The purpose is to deliver quality care.

​Minimum Requirements:

• High School graduate required.

• Successful graduate from an AMA approved Radiology program required.

• Registered by ARRT or CNMT

• Certified in PET/CT preferred.

• BLS required

Position Highlights and Benefits:

• Comprehensive benefit packages, including medical, dental, vision, mental health, paid time off, 403B, education assistance and voluntary benefits (pet insurance, accident insurance, hospital indemnity and others) available from the first day of employment.  

• Work/Life balance with flexible schedules.  

• Free onsite parking.  

• Our mission and core values are what drive each member of Trinity Health to support each other, communicate openly and respectfully while embracing a culture that nurtures a healing, safe environment for all.   

• Referral Rewards Program 

About us:

Nazareth Hospital serves Northeast Philadelphia and the surrounding region. With over 160 inpatient beds and many outpatient services, Nazareth Hospital has a broad range of specialties to meet patients’ health care needs.  Nazareth Hospital offers outstanding diagnostic, medical, surgical and therapeutic care with state-of-the-art technology. With the dedication of 1,200 employees and 350+ physicians and specialists, Nazareth Hospital treats patients and their families with respect and compassion while providing health care services in response to the changing needs of our community.  

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Ford's legacy of innovation is about to reach new heights. Imagine being on the ground floor of something truly extraordinary. At BlueOval Battery Park Michigan, we're not just assembling battery systems; we're leading a transformation. As a key member of our start-up team, you'll have a once-in-a-lifetime opportunity to launch a state-of-the-art manufacturing facility from the ground up. Imagine: you, at the forefront of the electrification movement, helping to bring the next generation of vehicles to driveways, job sites and highways everywhere.

At BlueOval Battery Park Michigan, you will...
• use your entrepreneurial skills and team mindset to come up with data-driven solutions
• build and lead an agile team to deliver the advanced technology that drives the future
• create a culture of trust, encourage diversity of thought and foster leadership in others
• be part of the historic transformation of the automotive industry.

What you'll do...

• Maintenance Work Planning & Scheduling:
  • Lead the detailed development, coordination, and control of maintenance and project work packages to ensure safe, compliant, and efficient execution, particularly during facility ramp-up and ongoing operations.
  • Develop and maintain integrated schedules for preventative, predictive, and corrective maintenance activities, including weekend and shutdown plans, utilizing advanced planning tools (e.g., Primavera P6, Maximo, SAP).
  • Create comprehensive work packages detailing procedures, permits, required materials, resource allocation, and craft-specific task sequences.
  • Conduct field walkdowns to confirm job scope, work boundaries, safety conditions, and material readiness, ensuring plans are executable and align with plant procedures.
• Asset Management & Continuous Improvement:
  • Identify spare parts and develop initial preventive maintenance (PM) job plans for new equipment, continuously reviewing and improving existing job plans based on equipment failures, feedback from skilled trades, and engineering input.
  • Assess and understand risks during the repair process, developing equipment validation plans post-repair to ensure reliability.
  • Lead and coach teams in leveraging machine monitoring tools to identify and eliminate production constraints, driving continuous improvement (SQDCPME) initiatives.
  • Participate in MOS meetings to analyze equipment failures and contribute to Root Cause Analysis (RCA) activities.
• Coordination & Data Management:
  • Coordinate multi-discipline work planning activities across mechanical, electrical, instrumentation & control (I&C), and facility workstreams.
  • Interface with engineering, operations, and other relevant teams to validate scope, field conditions, and ensure work readiness.
  • Ensure accurate data entry and status updates in the Computerized Maintenance Management System (CMMS) (e.g., Maximo, SAP) to support real-time schedule forecasting, outage coordination, and KPI reporting.
  • Generate comprehensive reports and metrics on planning progress, schedule compliance, and work package readiness for leadership and stakeholders.
• Compliance & Operational Support:
  • Apply formal change management protocols to address scope, schedule, or resource deviations while maintaining configuration control.
  • Ensure strict adherence to all government, industry, and Ford corporate safety, health, environmental, and quality standards throughout all planning activities.
  • Synchronize resources and activities required for problem-free equipment start-ups and shutdowns.
  • Be flexible and willing to assist with other job functions and departments as needed, including back-filling other roles, to support overall facility operations.
  Candidates must possess full flexibility and a readiness to consistently work across all established standard, operating, and rotational shift schedules, encompassing day, night, weekend, and holiday shifts.

• High School Diploma or Equivalent.
• 3+ years of demonstrated maintenance leadership experience, directly managing teams and indirectly influencing cross-functional groups to achieve objectives.
• 3+ years strong working knowledge and proficiency with a Computerized Maintenance Management System (CMMS) (e.g., Maximo, SAP PM) is essential.
• 3+ years ability to read and interpret technical drawings, schematics, and equipment manuals.
• Proficiency in Microsoft Office Suite (Word, Excel, Outlook).

Even better, you may have...

• Bachelor's degree in Engineering (Electrical, Mechanical, Industrial) or a related technical field.
• 5+ years of progressive experience in maintenance work planning within a heavy industrial or manufacturing environment.
• Experience in a battery pack manufacturing facility or a similar highly automated process industry.
• Strong knowledge of project controls, including cost estimation, earned value, scheduling logic, and risk mitigation strategies.
• Familiarity with Lean Manufacturing principles, Root Cause Analysis (RCA), and FMEA processes.
• Demonstrated experience with advanced scheduling software (e.g., Primavera P6, MS Project)
• Prior experience in a facility start-up or new equipment commissioning environment.
• Six Sigma: Black or Green Belt certified.
• Knowledge of constraint management principles.

You may not check every box, or your experience may look a little different from what we've outlined, but if you think you can bring value to Ford Motor Company, we encourage you to apply!

This position is a salary grade 8 and ranges from $96,720-162,120.
For more information on salary and benefits, click here: sponsorship is not available for this position.

Candidates for positions with Ford Motor Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.

We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status or protected veteran status. In the United States, if you need a reasonable accommodation for the online application process due to a disability, please call 1-888-336-0660.

#LI-Onsite

#LI-NS3

In our ‘always on’ world, we believe it’s essential to have a genuine connection with the work you do

Aurora Networks is the world’s leading provider of access network solutions. Our comprehensive, end-to-end product portfolio supports global service providers with innovative, leading-edge HFC, PON and broadband network products.

The Access Technology RF Design Engineering group in Aurora Networks is responsible for design and development of Hybrid-Fiber-Coax (HFC) and RF products for the support of CATV and Data services.

The group consists of hardware engineers and technicians developing RF and optical signal distribution products.

How You'll Help us connect the world:

Are you passionate about technology and hands-on problem-solving? We’re looking for a detail-oriented Electronics Lab Technician who thrives in a collaborative environment and loves working with cutting-edge tools. In this role, you’ll play a key part in building, testing, and troubleshooting advanced electronic systems that power our next-generation solutions.

Responsibilities:

Bring schematics and assembly drawings to life by assisting in circuit troubleshooting and repair.

Perform precision soldering and rework on Printed Circuit Boards (PCBs) and components.

Operate industry-standard test equipment, including Spectrum and Network Analyzers, Oscilloscopes, Optical Analyzers, power meters, bench power supplies, and multimeters.

Execute testing procedures and deliver clear, accurate reports.

Collaborate with engineers and teammates to solve challenges and drive innovation.

Follow established processes while contributing ideas to improve efficiency and quality.

Required Qualifications:

High School Diploma from a technical program; an Associate’s degree or technical certification is a plus.

Familiarity with Microsoft Office tools (Word, Excel, PowerPoint).

Strong communication skills—both written and verbal.

Ability to adapt quickly, stay organized, and meet deadlines under pressure.

A team player with a positive attitude and a passion for learning.

#LI-RB1

#LI-CT ONSITE

Our salary ranges consider a wide variety of factors, including but not limited to benchmarking by independent third-party consultants, skill sets, years of experience, training, education, geography, and other business needs. Depending on experience, the range can be higher for candidates with ,execeptional experience and a demonstrated history of successful performance. This position's expected total compensation (base salary and commission range) is $70,600.00- $86,500.00.

The candidate will be rewarded with a comprehensive benefits package, including medical, dental, and vision plans, life and accidental death insurance, a 401(k) plan, and participation in the Company’s Incentive Plan. Candidates starting with the Company will be eligible for eleven paid holidays in a full calendar year, two weeks of paid vacation (prorated based on start date), as well as other leave options.

Important Candidate Notice: On January 9, 2026, CommScope finalized the sale of its Connectivity and Cable Solutions segment, which included the CommScope name and brand, to Amphenol Corporation. The remaining businesses — Access Networks Solutions (now rebranded as Aurora Networks) and RUCKUS Networks have been unified under the new parent company, renamed as Vistance Networks. The role being advertised is part of Aurora Networks.

Why Join Us?

Vistance Networks shapes the future of communications technology, pushing past what is possible. We deliver solutions that bring reliability and performance to a world always in motion. Our global team of innovators and employees are trusted advisors who listen to customers first, then deliver value.

Aurora Networks (formerly CommScope’s Access Networks Solution segment) is the world’s leading provider of access network solutions. Our comprehensive, end-to-end product portfolio supports global service providers with innovative, leading-edge HFC, PON and broadband network products.

If you want to grow your career alongside bright, passionate, and caring people who strive to create what's next…..come connect to your future at Vistance Networks.

Vistance Networks is an Equal Opportunity Employer (EEO), including people with disabilities and veterans.

With over 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the marine, automotive, and renewable energy manufacturing industries.

Sika is a specialty chemicals company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the consruction and transportation industries toward greater environmental compatibility. Approximately 33,000 employees generated CHF 11.20 billion in sales in 2025

Sika is looking for an experienced shipping and receiving lead, to join our growing team. At Sika, the shipping and receiving employees perform various Shipping and Receiving tasks, pick material for internal process orders, and perform cycle counts as required.

Key Responsibilities:

• • Examine shipment contents and compare with records such as manifests, invoices, or orders to verify accuracy.
  
  • Record shipment data, such as weight, charges, space availability, damages, or discrepancies for reporting,
  
  accounting, or recordkeeping purposes.
  
  • Prepare documents, such as work orders, bills of lading, or shipping orders, to route materials.
  
  • Confer or correspond with establishment representatives to rectify problems, such as damages, shortages, or
  
  nonconformance to specifications.
  
  • Move levers or controls that operate lifting devices, such as forklifts, lift beams with swivel-hooks, hoists, or
  
  elevating platforms, to load, unload, transport, or stack material.
  
  • Inspect product load for accuracy and safely move it around the warehouse or facility to ensure timely and
  
  complete delivery.
  
  • Manually or mechanically load or unload materials from pallets, skids, platforms, cars, lifting devices, or other
  
  transport vehicles.
  
  • Position lifting devices under, over, or around loaded pallets, skids, or boxes and secure material or products for
  
  transport to designated areas.
  
  • Weigh materials or products and record weight or other production data on tags or labels.
  
  • Perform routine maintenance on vehicles or auxiliary equipment, such as cleaning, lubricating, recharging
  
  batteries, fueling, or replacing liquefied-gas tank.
  
  • Move controls to drive gasoline- or electric-powered trucks, cars, or tractors and transport materials between
  
  loading, processing, and storage areas.
  
  • Operate or tend automatic stacking, loading, packaging, or cutting machines.
  
  • Signal workers to discharge, dump, or level materials.
  
  • Complete cycle counts daily or as needed.
  
  • Support other areas of production as designated by Manufacturing Manager.
  
  • Pull and put away all material needed for production.
  
  • Organize and keep all materials together in the same locations.
  
  • All other duties as assigned.
  
  

Qualifications:

High School Diploma or equivalent preferred

• Ability to read, write, and perform basic math

• 1-2 years of relevant work experience

• Forklift experience required

Perks & Benefits

• 401k with Generous Company Match
  
  

• Bonuses
  
  

• Medical, Dental, and Vision Benefits
  
  

• Paid Parental Leave
  
  

• Life Insurance
  
  

• Disability Insurance
  
  

• Paid time off, Paid holidays
  
  

• Floating holidays + Paid Volunteer Time
  
  

• Wellness/Fitness Reimbursements
  
  

• Education Assistance
  
  

• Professional Development Opportunities
  
  

• Employee Referral Program & More!
  
  

Sika fosters a culture of entrepreneurship, empowering each individual to make decisions, learn from experiences, and shape their own career path. The safety and well-being of employees are top priorities at Sika, with a strong commitment to open communication and maintaining a safe workplace. In addition, Sika actively contributes to the community and promotes sustainability by giving back, minimizing environmental impact, and embracing social responsibility.

We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilites of each role. Compensation is determined based on skills relevant to the position, education, and or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics.

We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Key Responsibilities:

• Lead design, layout, and routing of industrial plumbing systems
• Create P&IDs, drawings, plans, sections, and construction details
• Perform design work from concept through detailed design phases
• Apply plumbing codes (IPC/UPC) to ensure accurate, compliant designs
• Coordinate with clients, contractors, and cross-functional teams
• Independently execute design packages with minimal supervision
• Support projects in complex industrial environments when applicable

Requirements:

• High school diploma or GED
• 8+ years of AutoCAD design experience
• 4+ years of Revit design experience
• 5+ years of industrial plumbing design (layout and routing)
• Strong knowledge of IPC and/or UPC plumbing codes
• Experience in industrial settings (semiconductor, cleanrooms, data centers, advanced manufacturing)
• Associate’s or technical degree in a related field

#GRPC

Equal Opportunity Employer/Veterans/Disabled

Benefit offerings include medical, dental, vision, term life insurance, short-term disability insurance, additional voluntary benefits, commuter benefits and 401K plan. Our program provides employees the flexibility to choose the type of coverage that meets their individual needs. Available paid leave may include Paid Sick Leave, where required by law; any other paid leave required by Federal, State or local law; and Holiday pay upon meeting eligibility criteria. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs which are direct hire to a client

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records.

We are seeking an experienced Licensed Texas Escrow Officer who values accuracy, consistency, and a well-run process. This role is ideal for someone who takes ownership of their files, communicates proactively, and works to resolve issues early to ensure smooth, on-time closings.

Our team operates in a structured, compliance-first environment with clear expectations and strong operational support. Escrow officers are trusted to manage their transactions while having the resources needed to navigate challenges effectively.

An established book of business is a plus, but not required. We support professionals who are focused on building and maintaining strong client relationships over time.

Responsibilities include but are not limited to:

• Prepare, review, and finalize Closing Disclosures (CDs) with a high degree of accuracy and compliance
• Review title commitments, surveys, and supporting documents; identify and resolve issues early in the process
• Clear Schedule C requirements and coordinate with all parties to ensure timely resolution
• Obtain lender approvals and funding authorizations prior to closing
• Order and review title updates; determine file readiness and proactively address outstanding items
• Coordinate and conduct real estate closings, including execution of documents and disbursement of funds
• Maintain consistent, professional communication with buyers, sellers, agents, lenders, and attorneys
• Ensure full compliance with Texas Department of Insurance (TDI) regulations and company policies throughout the transaction lifecycle

Requirements:

• High school diploma or equivalent required; associates degree preferred
• Active Texas Escrow Officer License required

Qualifications:

• Minimum of 5 years of experience managing residential escrow transactions independently
• Advanced knowledge of:
• Closing Disclosures (CDs) and settlement statements
• Escrow processes and title curative
• Texas title insurance procedures and TDI regulations
• Proven ability to manage multiple files in a deadline-driven environment while maintaining accuracy and compliance
• Strong organizational, communication, and problem-solving skills
• Ability to take ownership of files and proactively resolve issues without constant direction
• Established book of business or industry relationships is a plus but not required. We value professionals who can build and maintain strong client relationships over time.
• Experience with SoftPro Select preferred, but not required

**Description:**

You will be an Assembler for the Camden Operations team. Lockheed Martin Missiles and Fire (MFC) is a recognized designer, developer and manufacturer of precision engagement aerospace and defense systems for the U.S. and allied militaries. MFC develops, manufactures, and supports advanced combat, missile, rocket, manned and unmanned systems for military customers that include the U.S. Army, Navy, Air Force, Marine Corps, NASA and dozens of foreign allies.

Lockheed Martin's Camden Operations facility is a manufacturing, final assembly, test and storage operation for MFC programs.

**What You Will Be Doing**

As an Assembler, you will be responsible for helping create missiles, rockets and launchers that will protect our nation from its adversaries. Your responsibilities will include:

- Performing a variety of tasks ranging from repetitive to non-repetitive production assembly operations on mechanical assemblies and subassemblies including running automated equipment as well as applying touch up paint.

- Work from diagrams and drawings following detailed planning, and use hand and/or power tools, jigs and saws.

- Conduct quality inspections on processing lines in accordance with quality specifications.

- Disassemble, modify, rework, reassemble and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions

**Why Join Us**

We're looking for a detail-oriented and team-driven Assembler to join our Camden Operations team. As a key contributor to our defense systems, you'll have the opportunity to work on critical projects, develop your skills, and collaborate with a talented team. With a strong foundation in mechanical assembly and process flow, you'll be able to make a significant impact in this role. If you're passionate about working with your hands and contributing to the nation's defense, we encourage you to apply.

We are committed to supporting your work-life balance and overall well-being, offering flexible scheduling options Learn more about Lockheed Martin's comprehensive benefits package here.

**Further Information About This Opportunity:**

This position is in Camden. Discover more about our Camden, Arkansas location.

MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access.

This full time position is eligible for Apprenticeship LMCO.

Want to learn more? Check out this testimonial video featuring some of our manufacturing team members: mfcprodopsICs

**Basic Qualifications:**

- High school diploma or GED equivalent.

- Must have the desire and/or ability to use hand tools (i.e. torque wrench, drills and inspection tools, riveting tools, screwdrivers, power screwdriver, ratchet wrench, nut runner, crimpers, cable tools and various other hand tools).

- Ability to read and interpret assembly drawings or instructions.

- This position will be located at a facility that requires special access and requires the selected candidate to be a US citizen.

- This job will require lifting of up to 30-50 pounds.

- Ability to work overtime including Fridays, Saturdays, and Sunday's, occasional holidays, or extended hours during the week when needed

**Desired Skills:**

- Operating automated equipment, understanding of mechanical assembly and process flow.

- Prior SAP Software experience is a plus (on the job training will be provided).

- Strong teaming ability and effective communication skills.

- Critical thinking and problem solving.

- Familiar with Microsoft Office products (Outlook) is a plus

**Clearance Level:** None

**Other Important Information You Should Know**

**Expression of Interest:** By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.

**Ability to Work Remotely:** Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.

**Work Schedules:** Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.

**Schedule for this Position:** 4x10 hour day, 3 days off per week

**Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.**

**The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.**

Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They're dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about.

As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.

**Experience Level:** Hourly/Non-Exempt

**Business Unit:** MISSILES AND FIRE CONTROL

**Relocation Available:** No

**Career Area:** Manufacturing

**Type:** Full-Time

**Shift:** Third

• Program, set up, and operate Haas and Okuma CNC milling machines using Mastercam
• Read, interpret, and work from engineering drawings, blueprints, CAD models, and GD&T
• Machine custom fixtures, tooling, and production components to specified tolerances
• Collaborate with the Wire EDM process; utilize Makino Wire EDM support for fixture and tooling components as needed
• Coordinate the activities of technician in the pod by assigning tasks and ensuring adherence to production schedules.
• Inspect machinery for signs of wear, damage, or malfunction, and work with floor supervisor to generate appropriate corrective actions to address any issues identified.
• Provide guidance, training, and mentorship to pod technicians, fostering a culture of teamwork, accountability, and continuous learning.
• Have a strong understanding of G-Code and CAM to generate and modify when needed.
• Oversee the setup and operation of Mills and Vertical Saws to produce precision components according to engineering specifications.
• Monitor production processes to ensure efficiency, quality, and compliance with safety standards and regulations.
• Collaborate with management to prioritize work orders, allocate resources, and optimize production workflows.
• Conduct regular inspections of machining equipment, identifying maintenance needs, and coordinating repairs and upgrades as necessary.
• Support Management with develop and implement standard operating procedures (SOPs), work instructions, and quality control measures to improve process consistency and reduce waste.
• Communicate effectively with management, colleagues, and external stakeholders to provide updates on production status, resource requirements, and project timelines.
• Foster a culture of safety, quality, and continuous improvement, promoting adherence to company policies, procedures, and best practices.

• High School Graduate
• Minimum of 10+ years of CNC milling experience in a job shop environment
• Strong proficiency in Mastercam programming (2D and 3D)
• Extensive experience setting up and operating Haas and/or Okuma CNC mills preferred
• Proven ability to read and interpret complex engineering drawings and GD&T
• Experience machining fixtures, tight-tolerance parts, and varying part specifications
• Strong attention to detail, quality, and process control
• Ability to work independently and manage multiple jobs concurrently

• Experience working in a high-mix, low-to-medium volume job shop
• Familiarity with Wire EDM processes, specifically Makino Wire EDM, for fixture and tooling support

• Problem-solving skills
• Good verbal and written communication skills; strong organizational skills
• Working knowledge of Good Laboratory Practices (GLP), maintain Lab ISO and process Safety procedures.

Principal Duties/Responsibilities:

* Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to locate root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools.

* Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment.

* Independently performs maintenance as per industry standards.

* Works with Planner Scheduler to optimize preventative maintenance procedures.

* May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks.

* Complies with 5S and housekeeping standards.

* Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology.

* Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development.

* Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems.

* Utilizes predictive maintenance technologies to collect equipment performance data. Observes trends and makes recommendations.

* Updates records and reviews CMMS history and analyzes data.

* Completes and conducts on-the-job training and technical self-study programs for career development.

* Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions.

Knowledge, Skills, Abilities, & Behaviors Required:

* High School Graduate or equivalent (GED).

* Associates degree with a Technical focus and 5 years of related experience in specific industry; or, 7 years of experience in specific industry.

* Experience in predictive technologies, precision alignments, and general maintenance of applicable process equipment.

* Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs.

* Must be able to use basic hand tools and specialized tools as appropriate.

* Experience in vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment.

* May be required to travel.

Physical Demands and Working Conditions:

While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors.

ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more.