603 Manufacturing Connected By Trexon Jobs in Usa

Position Summary

603 Manufacturing is growing, and we are looking for a hands-on, detail-driven NPI / Manufacturing Engineer who thrives on turning complex, high-reliability builds into clean, repeatable, audit-ready processes. This role is especially critical as we support customers in the space and aerospace sectors, where documentation, traceability, and process control are non-negotiable. If you get fired up about transforming first builds into flight-ready production systems, this role is for you.

What You’ll Do

Lead New Product Introduction (NPI)

• Own the manufacturing ramp-up for new cable and electro-mechanical assemblies
• Translate engineering drawings, specifications, and customer requirements into production-ready processes
• Support and fully document first piece builds from prototype through production release
• Ensure builds meet space and aerospace level workmanship and documentation standards

Develop Flight-Ready Work Instructions

• Create clear, visual, step-by-step work instructions for complex cable assemblies
• Standardize documentation across programs to meet customer and regulatory expectations
• Build controlled, revision-managed documentation packages
• Incorporate inspection criteria, torque values, crimp specifications, test procedures, and traceability requirements

Space and Aerospace Compliance

• Interpret and implement customer flow-down requirements
• Ensure compliance with applicable standards such as:
• IPC/WHMA-A-620, Space Addendum preferred
• NASA workmanship standards where applicable
• AS9100 principles and documentation rigor
• Establish full material traceability and lot control processes
• Support first article inspections and customer audits
• Build processes that are repeatable, traceable, and audit-ready

First Piece and Process Development

• Capture photos, tooling setups, fixturing, inspection points, and lessons learned during first builds
• Identify risk areas early including handling, routing, strain relief, testing, and labeling
• Define quality gates and inspection checkpoints
• Convert tribal knowledge into controlled documentation

Standardization and Continuous Improvement

• Develop scalable templates for cable assembly documentation
• Drive consistency across programs and operators
• Improve throughput while maintaining zero-defect expectations
• Reduce variability in high reliability builds

What Makes You a Great Fit

• 5 or more years in manufacturing engineering, NPI, or process engineering
• Direct experience supporting space, aerospace, or other high-reliability customers
• Strong understanding of:
• IPC/WHMA-A-620, Space Addendum strongly preferred
• First Article Inspection, AS9102 experience a plus
• Configuration control and revision management
• Lot traceability and material control systems
• Experience building processes that withstand customer audits
• Comfortable on the production floor. This is not a desk-only role.
• Process-driven, detail-focused, and quality-first mindset

Bonus Points If You Have

• Experience supporting NASA, commercial space, or defense programs
• Experience working in an AS9100 environment
• Familiarity with controlled documentation systems such as PLM, ERP, or QMS
• Lean or Six Sigma background
• Experience building documentation systems from scratch

What Success Looks Like

• New space programs transition from first article to stable production smoothly
• Documentation passes audits without scrambling
• Full traceability exists from raw material to finished assembly
• Operators have clear, easy-to-follow instructions
• Builds are consistent, repeatable, and flight-ready

Why 603 Manufacturing?

We support customers who cannot afford failure. When it goes to space, it must work.

At 603, we are building the systems, documentation discipline, and manufacturing rigor to support high-reliability programs. We need engineers who understand what that truly requires.

You will not just document processes here. You will build the foundation for flight-ready manufacturing.

Trexon multiplies the strength of its brands, expanding engineering and manufacturing capacity to deliver superior performance. Our collective knowledge informs versatile cable, connector, and cable assembly solutions covering a full spectrum of critical applications.

Our expertise enables durable cable assembly solutions that ensure continuity of power, signal, and data for critical applications. We thrive in harsh environments, providing reliable performance where it matters most.

Our expertise enables durable cable assembly solutions that ensure continuity of power, signal, and data for critical applications. We thrive in harsh environments, providing reliable performance where it matters most.

Our expertise enables durable cable assembly solutions that ensure continuity of power, signal, and data for critical applications. We thrive in harsh environments, providing reliable performance where it matters most.

Our expertise enables durable cable assembly solutions that ensure continuity of power, signal, and data for critical applications. We thrive in harsh environments, providing reliable performance where it matters most

Our expertise enables durable cable assembly solutions that ensure continuity of power, signal, and data for critical applications. We thrive in harsh environments, providing reliable performance where it matters most.

Our expertise enables durable cable assembly solutions that ensure continuity of power, signal, and data for critical applications. We thrive in harsh environments, providing reliable performance where it matters most

When there's a high cost of failure, Trexon provides power, signal, and data for vital applications in the most harsh environments.

1200 Employees Globally

70+ Engineering FTE's

400,000 Sq Ft Manufacturing space

250+ A&D programs supported

80+ QC Experts

Explore upcoming events:

DSEI UK: , Excel London Royal Victoria Dock 1 Western Gateway, London E16 1XL, Booth #S4-151

European Microwave Week 2025: , Utrecht, the Netherlands, Booth #E106

MedDevice 2025: , Boston Convention & Exhibition Center, Boston MA, Booth #214

Explore how Trexon meets and exceeds industry standards to deliver excellence in every product we create.

**Please note that this role is not actually based in Blue Bell, PA. This role is onsite on the East Coast, please reach out for more exact information on location:

Director, Manufacturing

Overview:

The Director, Manufacturing Sterile Operations is accountable for driving results in a fast-paced environment by providing leadership to the site’s manufacturing function. Focus areas for the role include operational leadership, parenteral (Filling and Visual Inspection) manufacturing processes, project management, continuous improvement, change management, manufacturing investigations/corrective actions, participation in business reviews, and support of regulatory and client audits.

Responsibilities:

• Directs and leads the Manufacturing team to deliver on the schedule of four aseptic isolator fill lines and visual inspection to meet company and client demand.
• Leads manufacturing and cross functional support teams with Lean Six Sigma/ continuous improvement mindset and principals to achieve higher quality, compliance, and productivity goals.
• Develops information and produces reports concerning scheduling, production goals, equipment and maintenance problems and other studies or reports as requested.
• Provides manufacturing information by compiling, initiating, sorting, and analyzing production related records and data to key stakeholders.
• Ensures all manufacturing discrepancies are captured with appropriate documentation and then works collaboratively with appropriate personnel to facilitate client communication per quality agreements.
• Accountable for accurate and timely completion of all department investigation reports and the effective and timely corrective/preventative action (CAPA) implementations and follow-up.
• Accountable for the accurate and timely completion of all manufacturing processes and documentation (Manufacturing Batch Records and Quality Records) and "Right First Time" performance goals.
• Responsible for setting strategic direction and administration of Manufacturing.
• Responsible for budgets, forecast, and long-term planning and development of human and manufacturing resources.
• Ensures timely completion and compliance with cGMP and all other relevant company training requirements.
• Attracts, develops, and retains a high performing team to meet the current and evolving needs of the business through effective selection, training and development, coaching and mentoring and performance management.
• Other duties as assigned.

Qualifications:

• Bachelor’s degree required (Science or Engineering related preferred).
• 6+ years of management experience required.
• Prior pharmaceutical experience in sterile aseptic filling and visual inspection is required;
• Solid understanding of FDA and ANEX 1 aseptic guidelines and regulations.

Prior experience with final product release, major equipment validation, validation protocol review, process validation protocol review, 21 CFR Part 4/ISO 13485 and APRs preferred

Manufacturing Engineer II (Mid-Career)

Ready to join an award-winning company and disrupt the manufacturing industry? Then, let’s talk!

Manufacturing Engineer II

About Role:

Northeast Tool is advancing the future of flight, and we’re looking for a driven Manufacturing Engineer II to help push aerospace manufacturing forward. Join a high-growth company where bold ideas, cutting-edge processes, and world-class craftsmanship come together.

In this role, you’ll support and improve manufacturing and programming processes, collaborate cross-functionally to drive efficiency and quality, and help implement innovative solutions on the shop floor. Your contributions will play a key role in scaling operations and delivering precision components to our customers. If you thrive in a fast-paced environment and are motivated by continuous improvement and technical challenges, we’d like to meet you.

Essential Duties and Responsibilities:

• Lead Engineering review of in-process inspection results, supplying data summary to perspective parties and initiating next steps for resolution.
• Lead Production Readiness Review (PRR) meetings by managing document control of customer files prior to manufacturing release.
• Support traveler/router development in Enterprise Resource Planning (ERP) to assist Production & Quality readiness.
• Develop, evaluate, and review manufacturing plans and set-up sheets in support of the manufacturing process.
• Estimate manufacturing costs, determine time standards, and make recommendations for fixturing and process requirements.
• Utilize SolidWorks to design work-holding, fixtures, and/or tooling to support Production, Engineering, & Quality functions.
• Produce in-process 2D drawings to support critical manufacturing operations and inspection cadences.
• Support Engineering Change Request (ECR) process by helping to manage new customer drawings and models to ensure revision compliance, updating the company’s Enterprise Resource Planning (ERP) system accordingly.
• Define and maintain manufacturing processes by studying customer blueprints and testing manufacturing methods, tooling, and equipment.
• Assist in developing new and editing existing policies, procedures, and standards to ensure compliance to ISO9001, AS9100, & ITAR regulations
• Support non-conformance reporting (NCR) by leading root cause analysis meetings utilizing RCCA tools to identify root causes, and support Quality in outlining corrective actions to drive continuous improvement, supporting and completing corrective action items where appropriate.
• Work cross functionally with Quality, Operations, and Production to detect, evaluate, and eliminate scrap, reducing the cost of manufacturing for the company.
• Research, identify, and implement cost reduction and optimization opportunities within manufacturing facility through lean manufacturing principles.
• Act as liaison with customers, vendors, and staff to answer inquiries, concerns, or complaints about outgoing product.
• Provide hands-on technical support and instruction to manufacturing personnel on new machining procedures and processes.
• Additional duties as assigned.

Knowledge, Skills, Competencies, and Abilities:

• Excellent written and verbal communication skills
• Advanced computer skills, including Microsoft Office Suite applications, SolidWorks and familiarity with Mastercam
• Intermediate to advanced knowledge of Geometric Dimensioning and Tolerancing (GD&T) and Datum Structure Review
• Advanced ability to use lean manufacturing principles to create standards, work instructions, and waste removal/cost reduction
• Strong critical thinking and technical writing skills
• Intermediate to advanced understanding and experience in RCA and CAR methodology and tools; i.e. fishbone, 5-why, pareto, scatter diagram, etc.
• Strong communication and presentation skills with internal and external stakeholders
• Project management skills and familiarity with applicable software and tools
• Ability to work cross-functionally across multiple departments within an organization

Required Qualifications:

• Bachelor’s Degree (B.S.) in a technical field from a four-year college or university (Mechanical or Industrial Engineering degree strongly preferred)
• 5+ years related experience in a manufacturing environment; Equivalent combination of education and/or experience may be considered with a minimum of an Associate’s Degree from an accredited college or university.
• 2+ years’ experience in an AS9100 (Aerospace) environment.
• Demonstrable Mastercam experience.
• Advanced knowledge of GD&T & datum structure review - GD&T ASME Y14.5 - 2018 foundational level certification, or ability to obtain within 3 months of hire.
• Certified Six Sigma Green Belt (CSSGB), or higher, or ability to obtain within 6 months of hire.
• Certified SolidWorks Associate (CSWA), or ability to obtain within 6 months of hire.

Preferred Qualifications:

• Certified Six Sigma Black Belt (CSSBB), or Master Black Belt.
• Certified SolidWorks Professional (CSWP)
• Certified Project Management Professional (PMP)

Pay Rate: $90,000 - $130,000, depending on level of experience and required/preferred qualifications.

About Northeast Tool & Manufacturing:

Northeast Tool & Manufacturing is a preferred supplier of precision machined parts and complex assemblies for the Aerospace, Defense, & Space industries. Our strong reputation for exceptional quality standards, innovative processes, and cutting-edge solutions allows us to handle the most complex requests with ease.

Northeast Tool is a certified ISO 9001:2015 and AS9100D facility, as well as ITAR DDC compliant. The company specializes in a diverse range of capabilities, including 5-Axis Milling, Multi-Axis Turning, & Wire EDM.

Angstrom Group of Companies is a leading Tier 1, full-service supplier providing high-quality solutions to automotive and industrial original equipment manufacturers (OEMs). Angstrom offers a diversified product portfolio with vertically integrated manufacturing capabilities. Angstrom has 30+ manufacturing locations across North America, South America, and Europe. Core manufacturing units process Metals (Casting, Stamping, Forging, Welding, Machining, and Assembly), Resin (Injection Molding, Foam, and Fiber), and Electrical components (Wire Harnesses, Lighting, and assembly modules).

Minimum of 4 years of actual on-the-job experience ( no internship or fresh graduates)

RESPONSIBILITIES:

AME leads new projects right from the inception of the program till manufacturing launch, which includes prototype part development, APQP, manufacturing process planning, FMEA, selection of equipment, tooling design, developing infrastructure, conducting trial production, installation of manufacturing cell, executing PPAP, proving Run Rate, monitoring initial production run, and sign off from production. Implement advanced manufacturing techniques in existing production processes to maximize throughput / OEE. Resolves issues with design, manufacturability, or build sequences.

• Develop new product process design, PFD, FMEA, and prepare manufacturing equipment proposals to execute project deliverables in coordination with the Cross Functional Team
• Develop and execute prototype plans as per customer requirements.
• Recommend new manufacturing equipment by identifying vendors, evaluating equipment capabilities, service history, and service support. Secure buy-off from the CFT team.
• Ensure that sourced equipment and tooling meet established standards and project requirements
• Lead pre-production activities in coordination with the production department
• Lead PPAP and Run Rate to meet project deliverables
• Inputs and configures BOM’s, routing and master data to the ERP system.
• Develop process drawings, manufacturing instructions, control plan and work instructions for new products, machining, welding, assembly fixtures, and tooling
• Develop financial evaluations of potential major capital investment projects and provide documentation of investment vs payback to the superior.
• Coordinate manufacturing changes for the approved Engineering Change Request
• Evaluate existing methods of operations, routings, processes, tooling, etc., and recommend and/or initiate changes or modifications to update and achieve optimum operating efficiencies and manufacturing economies.
• Develop and manage plant layouts, CAD drawings, and operational design concepts
• Install and conduct equipment capability and certifications with the help of maintenance
• Coordinate and conduct new project PDT meetings with the customer and supplier.
• Application of lean concepts and capacity planning
• Application of error-proofing techniques
• Periodic review of process capability studies and initiate action to reduce FMEA / RPN
• Identify and address safety and ergonomic issues, as identified.
• Keep regular communications, periodic meetings with program management on new program awards, and the status of awarded programs
• Support Sales on RFQs, cost estimation, and technical presentation to seek new business
• Do participate in corrective preventive actions for customer and internal complaints
• Must be able to take the production engineer role in case new project activities are completed

QUALIFICATION AND KNOWLEDGE:

• Associate Diploma or Degree in Industrial / Mechanical / Manufacturing Engineering required
• Minimum of 4 years of actual on-the-job experience ( no internship or fresh graduates) in Engineering, product development, manufacturing in Automotive and/or Automotive Supply base
• Must have process experience in Machining, Welding (MIG, TIG), Robotic welding, Press Assembly, Fixture, Automation and cutting tools knowledge required
• Adequate knowledge of Problem-Solving methods, SPC and SQC tools required
• Auto CAD, Solid Works skill set
• Highly knowledgeable in APQP process, PPAP, PFMEA, PFD, Control Plan and WI
• Knowledge in GD&T and Lean manufacturing
• Knowledge in International Quality Management System - IATF 16949:2016/ISO 14001 /OHSAS and State Law in Industrial Regulations
• Proven ability in execution of project plans that have achieved the identified targets
• Understanding safety procedures and ability to work in a manufacturing environment
• Must be able to train, assist, lead, direct, instruct and discipline employees
• Strong sense of time management and urgency
• Ability to manage, navigate unexpected challenges with a focus to rapidly find solutions

PHYSICAL REQUIREMENTS:

• Sitting, squatting, walking, bending 8 –10 hours per day
• Must be able to lift 50 lbs. or more.
• Must be able to work in different weather conditions
• Exposure to production environment

WORK ENVIRONMENT:

• This role functions in a welding, assembly and machine shop environment
• This role routinely uses standard and special purpose equipment such as CNC machines, robots, welding, assembly fixtures and tools
• Technicians often work in assembly lines or automated production floors

SAFETY REQUIREMENTS:

• Must wear Personal Protective Equipment when in a production area

Angstrom NA LLC is an Equal Opportunity Employer. Employment at Angstrom NA LLC is governed by merit, qualifications, and professional competence. Angstrom NA LLC does not discriminate against any employee or applicant because of race, creed, national origin/ethnicity, color, religion, gender identity/expression, sexual orientation, marital status, age, veteran status, disability status, genetic information, pregnancy or related conditions, or any other basis protected by law.

Applicants requiring reasonable accommodation to the application/interview process should notify the Human Resources Department.

Avantor is looking for a Manufacturing Operations Supervisor to oversee the daily planning, implementation and maintenance of the manufacturing activities of a specific area.

The Supervisor ensures the effective use of materials, equipment and personnel in producing quality products at minimum costs and selects, develops, and evaluates personnel to ensure the efficient operation of the function. May also assist higher level supervisor.

This is a full-time position at our Carpinteria, CA location.

Work Schedule: 2nd shift: M-F, 3:00 pm - 11:30 pm with additional hours as needed.

What we're looking for:

• Education:
• High School diploma or equivalent; Bachelor's degree preferred in a technical field, preferably life science, chemistry and/or engineering discipline, or equivalent experience.
• Experience:
• Minimum 5 years of progressive manufacturing experience and responsibilities, 1 of which must be in a supervisory capacity; or equivalent combination of education and experience
• Life science, chemistry, chemical engineering or chemical production experience.
• Experience in cGMP manufacturing a plus.
• Additional Qualifications:
• Familiarity with Chemical and/or Aseptic production processes and applications within similar industry preferred.
• Highly organized and self-motivated individual who can work independently with little supervision.
• Must have strong leadership skills and problem solving abilities.
• Excellent oral and written communication skills.
• Ability to perform risk assessment of products and processes and develop corrective measures.
• Must be able to manage multiple tasks and priorities and easily adapt to changing situations.
• Computer literacy applied to scheduling, procedure revisions and data management is required.
• Ability to take initiative, meet deadlines, and lead people in a team environment essential.
• Proven track record of reducing costs through process improvements and efficiencies.
• Must be hands-on, team oriented and committed to business improvement processes.

How you will thrive and create an impact:

• Supervise the activities of the manufacturing employees.
• Plan, schedule, and coordinate departmental activities (including staffing) to fulfill sales orders, meet inventory requirements, and deliver manufactured products in accordance with established procedures and approved processes.
• Responsible for site security, safety and proper shutdown of site at conclusion of shift.
• Supervise and participate in the production operations.
• Monitor and improve the efficiency, output and safety of manufacturing processes through observations and measurements as well as by collecting and interpreting data
• Ensures proper manufacturing processes are followed in accordance to written documentation (i.e., Batch Records, cGMPs, SOP's, Work Instructions).
• Maintains and revises procedures associated with production processes to ensure accuracy, consistency and product quality.
• Create, edit, and maintain necessary documentation (SOP's, Work Instructions).
• Ensure all manufacturing safety policies and procedures are implemented and maintained at all times.
• Investigates and eliminates departmental non-conformities in manufacturing processes by employing root cause analysis and implements corrective and preventative actions.
• Analyze and design lean manufacturing cells using effective systems to optimize use of space, equipment, material, personnel and increase capacities.
• Assist in developing plant layout in planning rearrangement of facilities, equipment and operations for better utilization of space and to increase capacities.
• Supports process validations by defining process to quality parameters, executing protocols, collecting/interpreting data and supporting protocol summary where needed.
• Monitors work for accuracy, neatness, and conformance to policies and procedures.
• Trains, motivates, monitors and evaluates performance of manufacturing employees.
• Develop and implement departmental cross training initiatives to allow for flexible resources and aid in improved capacities.
• Actively participates with internal and/or customer audits.
• Participates with activities directly related to ISO certification, and on-going conformance.
• Works closely with internal departments to assure commitment to customer is met in a timely manner.
• Performs other duties as assigned.

The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Avantor is proud to be an equal opportunity employer.

Why Avantor?

Dare to go further in your career. Join our global team of 14,000+ associates whose passion for discovery and determination to overcome challenges relentlessly advances life-changing science.

The work we do changes people's lives for the better. It brings new patient treatments and therapies to market, giving a cancer survivor the chance to walk his daughter down the aisle. It enables medical devices that help a little boy hear his mom's voice for the first time. Outcomes such as these create unlimited opportunities for you to contribute your talents, learn new skills and grow your career at Avantor.

We are committed to helping you on this journey through our diverse, equitable and inclusive culture which includes learning experiences to support your career growth and success. At Avantor, dare to go further and see how the impact of your contributions set science in motion to create a better world. Apply today!

Pay Transparency:

The expected pre-tax pay for this position is

Actual pay may differ depending on relevant factors such as prior experience and geographic location.

EEO Statement:

We are an Equal Employment/Affirmative Action employer and VEVRAA Federal Contractor. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law.

If you need a reasonable accommodation for any part of the employment process, please contact us by email at let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address.

For more information about equal employment opportunity protections, please view the Know Your Rights poster.

3rd Party Non-Solicitation Policy:

By submitting candidates without having been formally assigned on and contracted for a specific job requisition by Avantor, or by failing to comply with the Avantor recruitment process, you forfeit any fee on the submitted candidates, regardless of your usual terms and conditions. Avantor works with a preferred supplier list and will take the initiative to engage with recruitment agencies based on its needs and will not be accepting any form of solicitation.

Senior Manufacturing Engineer – Precision Solenoid Valve Products

Westbrook, CT | Onsite

I’m currently working with a highly respected precision manufacturer that is looking to add a Senior Manufacturing Engineer to their team in Westbrook, Connecticut.

This role supports the production and continuous improvement of miniature solenoid valve products used in highly demanding applications.

The engineer in this position will play a key role in developing and improving manufacturing processes, supporting new product introductions, and driving process improvements that enhance quality, efficiency, and reliability.

While this position does not include direct supervisory responsibility, it does require strong technical leadership and the ability to influence cross-functional teams across engineering, quality, and operations.

Key areas of focus include:

• Manufacturing process development and optimization

• Supporting new product introductions and process transfers

• Root cause analysis and troubleshooting of production challenges

• Continuous improvement of yield, quality, and throughput

• Collaboration with engineering and operations teams to implement process improvements

Ideal background:

• Bachelor’s degree in Mechanical, Manufacturing, Industrial Engineering, or similar

• 7+ years of manufacturing engineering experience

• Experience supporting precision components, electromechanical assemblies, or fluid control products

• Strong hands-on problem-solving and process improvement skills

This is a great opportunity for someone who enjoys hands-on manufacturing engineering and technical leadership in a precision production environment.

The Plant Engineer is responsible for maintaining, optimizing, and improving manufacturing and packaging equipment within a pharmaceutical production facility. This role focuses on ensuring equipment reliability, regulatory compliance, and operational efficiency, with a strong emphasis on Vertical Form Fill Seal (VFFS) packaging systems used in pharmaceutical or medical product packaging.

]The Plant Engineer will support production operations through equipment troubleshooting, preventive maintenance programs, process improvements, and engineering projects while maintaining compliance with cGMP and FDA regulatory requirements.

Key Responsibilities

Equipment Reliability & Maintenance

• Provide technical support for manufacturing and packaging equipment, including Vertical Form Fill Seal (VFFS) machines.
• Troubleshoot mechanical, electrical, and automation issues affecting production equipment.
• Develop and maintain preventive and predictive maintenance programs.
• Coordinate repairs and upgrades with maintenance technicians and external vendors.
• Monitor equipment performance and implement improvements to increase uptime and efficiency.

Packaging Equipment Expertise

• Maintain and optimize VFFS packaging lines, including forming, filling, sealing, and product handling systems.
• Support setup, changeovers, and line optimization for packaging operations.
• Work with production teams to minimize downtime and improve throughput.
• Evaluate and recommend packaging equipment upgrades or modifications.

Regulatory Compliance & Validation

• Ensure all engineering activities comply with FDA regulations, cGMP, and pharmaceutical industry standards.
• Support equipment qualification activities including:
• IQ/OQ/PQ
• Process validation
• Packaging validation
• Maintain accurate technical documentation, SOPs, and maintenance records.

Qualifications/Education

• Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Industrial Engineering, or related field or equivalent experience
• 5+ years of engineering experience in pharmaceutical, medical device, or regulated manufacturing.
• Hands-on experience with Vertical Form Fill Seal (VFFS) packaging equipment.
• Experience in FDA-regulated or cGMP manufacturing environments.

Description

As a Manufacturing Engineering Intern at Elliott Manufacturing, you will have the opportunity to apply learned knowledge and skills while gaining valuable hands-on experience to start your career in Engineering. This internship will provide exposure to a manufacturing plant while also supporting other CentroMotion businesses remotely.

Responsibilities:

1. Establish inventory of manufacturing and quality control tooling.

2. Utilize existing Gage Control software to track tooling (if possible).

3. Establish physical storage locations for all tooling.

4. Implement 6S for tooling, so that missing tooling can be easily physically identified.

5. Establish check-in/check-out process for tooling.

6. Review QC tooling and ensure quantities of tools are appropriate for each tool type (too many/too little).

7. Look for opportunities to reduce QC calibrations for unnecessary and overabundance of tools.

8. Work with operators to create work instructions

Requirements

• Student of Junior or Senior standing currently pursuing a degree in Engineering or related field
• Strong attention to detail and organizational skills
• Excellent communication and interpersonal skills
• Proficient in Microsoft Office Suite
• Ability to multitask and prioritize tasks effectively
• Must be able to maintain confidentiality and sensitive information

Job Description At Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.

Millennium Space Systems, a part of Boeing Defense, Space and Security (BDS), is a fast, agile small satellite company focused on national security space.

Our missions have direct impact to global security, like missile warning and Earth observation.

Our team is curious, bold and innovative.

We take risks, innovate and explore new techniques and technologies.

We influence change because we challenge the status quo.

And when we watch our satellites launch, we know each one of us made it happen.

As a Manufacturing Engineer
- Structures and Propulsion, you will be responsible for developing, qualifying, and implementing manufacturing processes and procedures to build, test and launch satellites, related subsystems, and components.

This role requires the ability to work second shift.

This position's internal job code is Manufacturing Engineer.

Our team is currently hiring for a Level 2-3.

Position Responsibilities: Develops manufacturing processes by studying product requirements: researching, designing, modifying, and testing manufacturing, methods and equipment; conferring with equipment vendors Reviews designs for manufacturability and production scalability Collaborate with stakeholders to create and maintain work instructions, bills of materials, standard operating procedures, etc.

in support of manufacturing and supply chain execution Coordinates and implements new engineering principles, theories, advanced technologies and concepts Leads advanced design solutions and supports research of new product or business opportunities Leads and executes tasks as needed to transition hardware build from low-rate initial production to higher rate production Basic Qualifications (Required Skills/Experience): Bachelor's Degree in an Engineering discipline (ABET accreditation required) 3 years' experience in mechanical manufacturing engineering in Aerospace, Automotive, or Commercial industries (Structures, Propulsion, Integration or GSE) Experience reading, analyzing, and interpreting mechanical engineering drawings, technical manuals and policies and recommend changes to procedures Good understanding of GD&T per ASME Y14.5 Must have technical problem-solving skills, including root cause analysis complete with sound engineering based corrective actions Knowledge of manufacturing engineering principles and concepts Preferred Qualifications (Desired Skills/Experience): Experience with any of the following: composites, bonded joints, dampers, additive manufacturing, shock or mechanisms Thorough understanding of root cause analysis and related analytical methodology (Five Whys, Fishbone/Ishikawa Analysis, 8D, etc.) Aerospace and/or DOD Experience Background in Lean Manufacturing/Process Improvement Master's degree in Mechanical Engineering, Aerospace Engineering, or a related field from an accredited university Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process Drug Free Workplace: Millennium Space Systems, a Boeing Company, is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Total Rewards: At Millennium Space Systems, a Boeing Company, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

Millennium Space Systems also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: Level 2: $80,750
- $118,750 Level 3: $96,050
- $141,250 Millennium is DDTC-registered, ITAR-compliant Company.

This position is located at a facility that requires special access.

Applicants MUST be U.S.

citizens and eligible for a security clearance.

Additionally, applicants must be willing to apply for and maintain a security clearance.

We encourage all interested candidates to apply for any open position for which they feel they are qualified.

Applications for this position will be accepted until May.

31, 2026 Export Control Requirements: This position must meet U.S.

export control compliance requirements.

To meet U.S.

export control compliance requirements, a "U.S.

Person" as defined by 22 C.F.R.

§120.62 is required.

"U.S.

Person" includes U.S.

Citizen, U.S.

National, lawful permanent resident, refugee, or asylee.

Export Control Details: US based job, US Person required Relocation Relocation assistance is not a negotiable benefit for this position.

Security Clearance This position requires the ability to obtain a U.S.

Security Clearance for which the U.S.

Government requires U.S.

Citizenship.

An interim and/or final U.S.

Top Secret Clearance Post-Start is required.

Visa Sponsorship Employer will not sponsor applicants for employment visa status.

Shift This position is for 2nd shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.aa415a4b-8b21-40fc-a65c-70d2b25ca29a

We’re hiring a Data Insights Analyst to join a growing analytics team focused on turning large, complex datasets into clear, actionable insights that drive business decisions. This is a hands-on role for someone who enjoys digging into data, working with Python and SQL, and partnering with leaders to understand what’s really happening in the business. You’ll work across multiple functions and contribute directly to high-impact initiatives around forecasting, performance analysis, and strategic decision-making.

Keys to an Interview: Data Insights Analyst | CPG Manufacturing

• 2-5 years' Data Science and/or Business Analyst experience
• Master's Degree preferred
• Strong working experience with Python for data analysis (and exposure to machine learning is a major plus)
• Advanced SQL skills with the ability to pull and manipulate data from large data warehouses
• Ability to interpret existing dashboards and datasets and identify meaningful insights
• Clear communication skills and comfort explaining technical findings to non-technical stakeholders
• Comfortable working on-site, with flexibility

Key Responsibilities: Data Insights Analyst | CPG Manufacturing

• Analyze large, complex datasets to identify trends, opportunities, and risks across the business
• Leverage Python, SQL, Excel, and Power BI to deliver actionable insights and recommendations
• Build and enhance analytical models to support forecasting, budgeting, and strategic planning
• Develop, maintain, and improve dashboards and reporting used by leadership
• Clean, transform, and validate data to ensure accuracy and consistency
• Partner cross-functionally to understand business questions and translate them into data-driven solutions
• Present findings clearly and concisely to senior stakeholders
• Support automation and process improvements to increase analytical efficiency
• Contribute to high-visibility initiatives that influence growth and long-term strategy

Job Description At Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.

Millennium Space Systems, a part of Boeing Defense, Space and Security (BDS), is a fast, agile small satellite company focused on national security space.

Our missions have direct impact to global security, like missile warning and Earth observation.

Our team is curious, bold and innovative.

We take risks, innovate and explore new techniques and technologies.

We influence change because we challenge the status quo.

And when we watch our satellites launch, we know each one of us made it happen.

The Production team is looking for a versatile aerospace manufacturing leader tasked with overseeing our Environmental Test lab.

They will be responsible for executing the testing of our space-grade avionics at high rate and low cost.

Personnel safety and product reliability will always be top of mind for this candidate.

The role will serve as the Environmental Test execution subject matter expert and will be an advocate of the Environmental Test Team to ensure the team has the resources needed to succeed.

The candidate will develop and sustain a vision for growth and development of both the members of the team and the capabilities of the environmental test lab.

A successful candidate for this role will demonstrate integrity, intellectual curiosity, empathy, technical capability, and strong motivation to support their team.

This position requires the ability to first shift (6:00am-3:30pm).

This position's internal job code is Manufacturing Manager.

Our team is currently hiring for a level K.

Position Responsibilities: Serve as the primary point of support for the environmental test technician team Provide mentorship and guidance to each member of the team via both frequent 1:1s and formal performance review periods Establish career development plans and foster individual growth to unlock each member's maximum potential and facilitate their desired career trajectory Advocate for the team and cultivate an environment where they can be successful Manage communication within the team by providing context/rationale for higher level decisions Develop cross-training initiatives, staffing plans, and a robust recruiting pipeline to support the growing needs of the business Establish and increase the efficiency of business processes to maximize output, limit burden, and enable products to rapidly transition from engineering development to high-rate production Leverage cross-functional relationships to help identify improvement opportunities, align on priorities, and execute initiatives to reduce lead time, labor hours, etc Leverage data to establish, monitor, and improve manufacturing metrics enveloping safety, quality, delivery, and cost Enable manufacturing autonomy by challenging requirements, simplifying work processes, and automating actions Partner with peer engineering teams to implement design changes in response to manufacturing issues and departmental standardization initiatives Basic Qualifications (Required Skills/Experience): Minimum of 5 years of experience in a manufacturing environment Minimum of 2 years of experience leading technician teams Minimum of 2 years of hands-on experience running functional, vibration, and thermal tests for small assemblies Experience working with various manufacturing execution systems This position requires the ability to obtain a U.S.

Security Clearance for which the U.S.

Government requires U.S.

Citizenship.

An interim and/or final U.S.

Security Clearance Post-Start is required Preferred Qualifications (Desired Skills/Experience): Experience in the aerospace industry Proficiency with PC Applications, especially Excel Excellent written and Verbal Communications Associate's degree (or equivalent) in business Demonstrated ability to aggregate, visualize, and analyze data to make informed decisions (i.e.

SQL, Excel, PowerBI, etc.) Familiarity with testing electromechanical assemblies Demonstrated ability to scale manufacturing rate capability Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process Drug Free Workplace: Millennium Space Systems, a Boeing Company, is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Total Rewards: At Millennium Space Systems, a Boeing Company, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

Millennium Space Systems also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: Level K: $119,000
- $175,000 Millennium is DDTC-registered, ITAR-compliant Company.

This position is located at a facility that requires special access.

Applicants MUST be U.S.

citizens and eligible for a security clearance.

Additionally, applicants must be willing to apply for and maintain a security clearance.

We encourage all interested candidates to apply for any open position for which they feel they are qualified.

Applications for this position will be accepted until May.

29, 2026 Export Control Requirements: This position must meet U.S.

export control compliance requirements.

To meet U.S.

export control compliance requirements, a "U.S.

Person" as defined by 22 C.F.R.

§120.62 is required.

"U.S.

Person" includes U.S.

Citizen, U.S.

National, lawful permanent resident, refugee, or asylee.

Export Control Details: US based job, US Person required Relocation Relocation assistance is not a negotiable benefit for this position.

Security Clearance This position requires the ability to obtain a U.S.

Security Clearance for which the U.S.

Government requires U.S.

Citizenship.

An interim and/or final U.S.

Top Secret/SCI Clearance Post-Start is required.

Visa Sponsorship Employer will not sponsor applicants for employment visa status.

Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

d24ad0b8-823f-4e68-a892-2986ccdf7392

Do you enjoy hands-on work and take pride in building something that truly matters? Are you motivated by staying on schedule, solving problems quickly, and seeing the direct results of your work? If you’re looking for a fast-paced manufacturing role where you’ll assemble Extol’s proprietary, high-impact product line and work closely with a supportive, close-knit team — this could be the right fit for you.

Extol, Inc. is looking for a driven and detail-oriented Manufacturing & Assembly Technician! This position is responsible for performing component manufacturing and equipment assembly to support Extol’s proprietary staking product line. Strong candidates will demonstrate mechanical aptitude, the ability to follow build schedules and instructions accurately, and proactive communication to keep production running smoothly.

The Ideal Candidate

• Provides component manufacturing and equipment assembly, including assembly, wiring, program downloads, and testing to meet specifications.
• Maintains alignment with the build schedule to ensure products are completed and shipped on time.
• Ensures parts meet requirements through visual inspection and use of measuring devices.
• Works collaboratively with purchasing, sales, and internal team members to resolve issues and maintain workflow.
• Develops process awareness by identifying waste and suggesting continuous improvement opportunities.
• Demonstrates ownership of the manufacturing cell by maintaining organization, equipment upkeep, and clear communication when issues arise.

What You’ll Bring

• High school diploma or equivalent with strong mechanical aptitude.
• Experience using hand and power tools safely and effectively.
• Ability to read and interpret work instructions and use routine measuring devices such as calipers and micrometers.
• Basic computer skills including email and spreadsheet use.
• Strong organizational skills, attention to detail, and the ability to work both independently and within a team.

What We Offer:

• Paid Community Impact –Employer paid time off to volunteer and positively impact community (Significant Impact).
• Employee Stock Ownership Plan (ESOP) - employees gain ownership interest in the company.
• Profit Sharing - a portion of the company profits are distributed to employees each quarter the target profit level is reached.
• 100% Employer Paid Dental, Vision, Group Life Insurances, Short-term and Long-term Disability, and Employee Assistance Program
• Annual Employer H.S.A. Contributions and 3 Medical Insurance Plan Options (one of which is 100% employer paid!)
• Generous Paid Time Off - Vacation, sick time off, and nine paid holidays.
• In Addition - Voluntary Life Insurance Options, Pet Discount Program, Accident & Critical Illness plans, 401k, and Educational Reimbursement Program.

About Extol, Inc.:

Extol is an innovative manufacturing technology company striving to improve plastic products through engineering, plastic assembly technology, custom automation, and 3D printing.

We strive to build a customer-centric, values-driven organization that grows profitably by solving customers' challenges with a delightful experience.

If you have passion to work collaboratively and be part of a team that wants to win together, apply today! To learn more about Extol, please visit us at | Empathy | Humility | Trust | Winning Together

Job description:

Overview

The Engineer/Programmer is responsible for preparing and validating PCB fabrication and assembly data packages while also programming and supporting production equipment across Adura’s SMT, inspection, and electrical test platforms.

This role bridges design-to-manufacturing execution by converting customer data into production-ready CAM outputs and machine programs for SMT lines, AOI, X-ray, and Flying Probe systems. The position plays a critical role in enabling high-reliability thermal PCB-A production for Automotive, Medical, Defense, and Aerospace markets.

Key Responsibilities

CAM & DFM Responsibilities

• Review customer Gerber, ODB++, IPC-2581, and CAD data for manufacturability
• Create panel layouts optimized for yield, SMT flow, and thermal PCB constraints
• Define stack-ups, copper weights, materials, impedance requirements
• Perform DFM analysis for heavy copper, metal-core, and high-power designs
• Generate fabrication drawings, drill files, and production documentation
• Manage revision control and maintain accurate data records
• Support quoting with panel yield calculations and fabrication cost drivers

Machine Programming & Production Support

• Program SMT pick-and-place machines (component libraries, feeder setup, placement files)
• Generate and optimize solder paste printer programs (alignment, offsets, stencil parameters)
• Program 3D SPI inspection parameters and board models
• Develop AOI inspection programs and tuning criteria
• Support X-ray inspection programming for void analysis and BTC/QFN inspection
• Create and validate Flying Probe test programs for electrical verification
• Assist in NPI builds by debugging programs and optimizing cycle time
• Maintain component libraries and machine databases
• Collaborate with Process Engineering to optimize placement strategy and throughput

Requirements

• 3+ years experience in PCB CAM and SMT manufacturing environments
• Proficiency with CAM350, Genesis, or equivalent CAM software
• Hands-on experience programming SMT equipment (printer, pick-and-place, AOI)
• Familiarity with X-ray and Flying Probe programming environments preferred
• Strong understanding of PCB stack-ups, thermal materials, heavy copper routing
• Experience with high-mix / low-to-medium volume production environments
• Strong documentation and attention to detail
• Ability to troubleshoot machine programs and support production ramp-up

Ideal Candidate Profile

• Comfortable moving between CAD data and production floor
• Strong problem-solving mindset
• Detail-oriented but production-focused
• Understands impact of programming decisions on yield and cycle time
• Familiar with IPC Class 2/3 environments

Benefits:

• 401(k)
• Dental insurance
• Health insurance
• Paid time off
• Vision insurance

Experience:

• SMT Programming: 2 years (Required)
• CAM programming: 1 year (Required)
• electronics manufacturing: 1 year (Required)

Work Location: In person

Job Title: Manufacturing Technician

Duration: 6 + Months (Possibility of Extension & Conversion depending on Performance)

Pay Range: $28-30/hr - Temp to hire

Location: Acton, MA

Shift - 12-hour weekend shift - Day Shift /Night shift - 6:00 PM – 6:30 AM

Job Overview

This position supports the weekend AM shift as part of a rapidly growing U.S. medical device manufacturing operation.

Weekend AM Shift Schedule

Friday – Sunday | 6:00 PM – 6:30 AM (12-hour shifts)

Workers are paid for 40 hours/week due to the weekend premium.

Position Summary

The Associate Manufacturing Technician plays a key role in operating and maintaining advanced automated equipment used to manufacture a flagship medical device product. The technician will be trained to operate and troubleshoot a wide range of technologies including:

• Heat staking
• Laser welding
• Mechanical assembly
• PCB handling and testing
• Robotic automation
• Metal stamping & forming
• Medical packaging systems
• High-speed component assembly

This role requires strong mechanical aptitude, problem-solving ability, and comfort working in a fast-paced, regulated manufacturing environment.

Key Responsibilities

• Perform equipment setup, operation, troubleshooting, and basic preventive maintenance with minimal supervision.
• Maintain raw material feeds and clear equipment faults/stoppages.
• Use Human Machine Interfaces (HMIs) to make process adjustments.
• Prepare and maintain raw materials to ensure on-time production.
• Create work orders for emergency, corrective, or preventive maintenance.
• Track inventory and support quality processes using computer systems.
• Support new product introductions, equipment validations, and process improvements.
• Investigate and resolve equipment or process-related issues.
• Perform routine equipment cleaning, inspection, and lubrication.
• Use measurement tools (micrometers, calipers, gauges) to verify tolerances.
• Follow Good Manufacturing Practices (GMPs) and all safety protocols.
• Maintain cleanroom and medical-device-grade work environments.
• Collaborate with team members to resolve issues and implement corrective actions.
• Perform other related duties as assigned.

Education & Experience

Preferred:

• High school diploma/GED
• 3+ years of manufacturing experience (training provided for qualified candidates)

Required Skills

• Proficiency in English (reading documentation, communication, writing)
• Basic math skills (arithmetic, geometry, algebra)

Preferred Skills

• Experience with automated or robotic machinery
• Familiarity with HMIs and industrial equipment
• Use of measurement instruments (calipers, micrometers, gauges)
• Prior medical device manufacturing experience
• Experience in cleanroom environments
• Knowledge of welding technologies (laser, heat staking, ultrasonic)
• Mechanical aptitude and ability to troubleshoot equipment
• Understanding of production processes, raw materials, and quality control
• Ability to work independently and in cross-functional teams
• Strong attention to detail, reliability, and positive attitude
• Experience in start-up or fast-paced production environments

Dexian is a leading provider of staffing, IT, and workforce solutions with over 12,000 employees and 70 locations worldwide. As one of the largest IT staffing companies and the 2nd largest minority-owned staffing company in the U.S., Dexian was formed in 2023 through the merger of DISYS and Signature Consultants. Combining the best elements of its core companies, Dexian's platform connects talent, technology, and organizations to produce game-changing results that help everyone achieve their ambitions and goals. Dexian's brands include Dexian DISYS, Dexian Signature Consultants, Dexian Government Solutions, Dexian Talent Development and Dexian IT Solutions. Visit to learn more. Dexian is an Equal Opportunity Employer that recruits and hires qualified candidates without regard to race, religion, sex, sexual orientation, gender identity, age, national origin, ancestry, citizenship, disability, or veteran status.

Senior Director, Process Engineering & Contract Manufacturing Scale-Up

Location: Durham, NC (In-Office) 

Reports To: SVP Operations

Applying

To apply directly to this role, please email a non-ChatGPT paragraph explaining why you believe you would be the best fit for this role and attach your resume as a PDF. Applying via email is the only way to be considered.

About Carpe

Carpe is the fastest-growing deodorant brand in the United States. Our team is composed of ~25 incredibly smart people working together in person in downtown Durham, NC. Our office is open, collaborative, and high energy.

We build products that solve real problems for millions of people who struggle with excessive sweating. Our growth over the past several years has been rapid, and we are continuing to expand across retail, ecommerce, and new product categories.

As the company scales, building a strong, reliable, and scalable manufacturing foundation is critical to our long-term success.

The Role

We are seeking a high-ownership process engineering leader with a strong chemical engineering background who thrives in fast-growing environments and enjoys building systems that support scale. This is not a procurement or vendor management role. It is a technical manufacturing role focused on process engineering, scale-up, and improving manufacturing performance.

This role exists to build Carpe’s manufacturing process engineering capability as we expand production across multiple product categories and manufacturing partners. The primary focus is on developing robust, scalable processes that consistently deliver product performance.

This is a hands-on technical role. You will work directly with manufacturing teams to define critical process parameters, troubleshoot production challenges, and improve process reliability as we scale.

You will partner closely with Product Development, Operations, and Quality to translate product innovation into well-defined, scalable manufacturing processes. Success in this role requires the ability to develop long-term process engineering frameworks while also working directly with manufacturing teams to solve technical challenges and improve production performance.

What You’ll Do

Process Engineering & Manufacturing Science

• Build and lead Carpe’s internal manufacturing process engineering capability
• Work directly with contract manufacturing teams to document and refine production processes
• Identify and define critical process parameters that drive product consistency and performance
• Lead process characterization work, including DOE design and execution
• Improve process robustness and repeatability across manufacturing partners
• Troubleshoot complex manufacturing challenges and support manufacturing teams in solving production issues
• Drive continuous improvement initiatives across manufacturing operations

Technology Transfer & Product Scale-Up

• Lead the technical transfer of new products from development into commercial manufacturing
• Work directly with contract manufacturers to scale formulations and processes successfully
• Partner closely with Product Development to translate product specifications into scalable manufacturing processes
• Oversee pilot trials, validation runs, and commercialization readiness for new product launches
• Ensure new products are successfully and reliably launched across manufacturing partners

Manufacturing Performance & Continuous Improvement

• Establish operational metrics and performance tracking across contract manufacturing partners
• Improve manufacturing efficiency, yield, and process reliability
• Lead root cause investigations and corrective actions related to manufacturing issues
• Implement stronger process control and operational discipline across manufacturing partners
• Develop scalable manufacturing frameworks that support continued company growth

Cross-Functional Collaboration

• Partner closely with Product Development to ensure manufacturing processes support product performance requirements
• Collaborate with Quality and Regulatory to ensure manufacturing processes meet compliance and quality standards
• Work with supply chain and planning teams to support production scheduling and inventory needs
• Provide manufacturing insight during product development and innovation planning

Contract Manufacturing Leadership

• Own and manage Carpe’s network of contract manufacturing partners
• Build strong working relationships with technical teams at manufacturing partners
• Improve operational performance across quality, delivery, and cost
• Lead onboarding and qualification of new manufacturing partners as capacity expands
• Ensure manufacturing partners are prepared to support both current production and future growth
• Serve as the primary operational leader responsible for manufacturing performance across the network

Who You Are

• Bachelor’s degree in Chemical Engineering, Manufacturing Engineering, or a related technical discipline
• 10–15+ years of experience in manufacturing, process engineering, or operations leadership within consumer packaged goods, personal care, or related industries
• Experience with emulsions, OTC personal care, or topical formulation manufacturing
• Experience managing contract manufacturing networks and external production partners
• Strong technical background in manufacturing processes and scale-up
• Experience working with highly structured emulsions or shear-sensitive formulations
• Demonstrated ability to build systems, processes, and infrastructure in growing organizations
• Comfortable operating in fast-moving environments where both strategy and hands-on execution are required
• Willing and able to travel a lot (and last minute) 
• Strong engineering instincts and problem-solving ability
• Ability to work directly with manufacturing partners to improve processes and solve technical challenges

Bonus If You Have

• Background in manufacturing engineering or process engineering leadership roles
• Experience scaling products across multiple contract manufacturing sites
• Experience building manufacturing infrastructure in high-growth CPG environments

What You’ll Get

• Direct collaboration with senior leadership as we scale the business
• Opportunity to build and own Carpe’s manufacturing infrastructure during a major growth phase
• Competitive compensation based on experience and level
• Health, vision, and dental coverage
• Flexible PTO
• A front-row seat to the growth of one of the most disruptive brands in body care



Applying

To apply directly to this role, please email a non-ChatGPT paragraph explaining why you believe you would be the best fit for this role and attach your resume as a PDF. Applying via email is the only way to be considered.

The Sr Manufacturing Engineer is responsible for the technical development, oversight and improvement of manufacturing processes within the area of responsibility. This individual will lead process optimization, technical problem-solving, and cross-functional manufacturing initiatives. This role is accountable for achieving senior-level competence Plans and presents engineering program and product design reviews for compliance with engineering principles, company standards, customer contract requirements, and related specifications. Develops and requests design and specification change releases. Assesses and communicates impact of engineering initiatives to functional groups. The ideal candidate demonstrates advanced technical depth, measurable impact on production performance, and the ability to mentor mid-level and entry-level engineers while partnering with cross-functional stakeholders. This role is classified as Exempt for FLSA purposes and reports to the Engineering Manager.

Pay Range: $110,00.00 to $137,000.00 per year. Final compensation will be based on experience and qualifications.

Essential Responsibilities

• 
  
• Develop, release, and maintain detailed technical work instructions for the manufacture and repair of aerospace metallic structures and assemblies, ensuring full compliance with customer(s) engineering definition and regulatory requirements.
  
• Partner with CNC Programming group to develop and implement manufacturing plan for complex metallic machined components/assemblies.
  
• Provide advanced technical support to Quality and Operations teams to achieve site-level Safety, Cost, Quality, and Delivery (SCQD) objectives; act as a primary escalation point for complex manufacturing issues.
  
• Partner with Purchasing and Sales during the quoting process to define manufacturing approach, assess technical risk, establish labor standards, and ensure cost competitiveness.
  
• Establish and validate operational standard hours using time studies and process analysis; drive accuracy in routing and capacity planning assumptions.
  
• Review engineering drawings, specifications, and model-based definitions to ensure manufacturability; translate design requirements into controlled shop-floor documentation.
  
• Train and mentor operators and junior engineers on manufacturing methods, process controls, and quality standards; elevate overall technical capability of the team.
  
• Lead productivity and cost-reduction initiatives through Lean principles, waste elimination, and process optimization; quantify and report measurable performance improvements.
  
• Develop, validate, and industrialize manufacturing processes for new product introduction (NPI), ensuring processes meet defined capability, repeatability, and quality targets prior to production release.
  
• Evaluate nonconforming components and determine repair feasibility; develop and validate repair schemes in coordination with Engineering and Quality functions
  

The individual is required to be a supportive member of Environmental Safety & Health (ESH) and Quality System policies to provide a safe work place and eliminate conditions and behaviors which may cause work related illnesses and/or injuries while delivering quality product and services on time.

Bachelor of Science in Mechanical Engineering, Manufacturing Engineering, Chemical Engineering, Aerospace Engineering or relevant technical discipline, or HS Diploma/GED w/equivalent composite/aerospace manufacturing/repair experience. 5+ years of technical experience with composites and/or aerospace components production or repair.

Desired Characteristics

• Demonstrated experience creating, structuring, and maintaining complex multi-level Bills of Material (BOMs) for aerospace assemblies, ensuring configuration control and production readiness.
• Proven experience in the developing and implementing machining strategies of large-scale metallic aerospace structures, including fixturing for both Milling and Turning.
• Hands-on experience machining large metallic aerospace components, including process planning, tooling strategy, and dimensional validation.
• Strong proficiency in engineering drawing interpretation, including advanced Geometric Dimensioning and Tolerancing (GD&T) application and tolerance analysis.
• Working knowledge of CAD systems such as CATIA, SolidWorks, NX; ability to interrogate models to support manufacturability and tooling design decisions.
• Experience designing and validating manufacturing tooling for, including production fixtures, machining/holding fixtures and assembly aids.
• Demonstrated change management capability, including leading engineering change implementation across cross-functional teams; ability to manage risk, stakeholder alignment, and execution discipline.
• Strategic thinker capable of translating high-level engineering change initiatives into structured, tactical execution plans; analytical, data-driven, and results-oriented.
• Strong background in continuous improvement methodologies including Six Sigma, Lean Manufacturing, and ACE; proven record of measurable operational improvements.
• Excellent written and verbal communication skills with the ability to influence across organizational levels; demonstrated ability to build engagement and sustain a culture of operational excellence
• Strong familiarity with Microsoft Office products (Word, Excel, PowerPoint, etc.) required.

This position is currently accepting applications.

Apply Now

Manufacturing Engineer (Metals)

About the Role

A well-established advanced manufacturing organisation is seeking a Manufacturing Engineer with strong TIG welding experience to support welding processes within a high-mix precision manufacturing environment.

This role focuses on developing, improving, and supporting GTAW (TIG) and orbital welding processes used in stainless steel tubing assemblies and precision components. The position works closely with Engineering, Quality, and Production teams to ensure welding operations are robust, repeatable, and suitable for scaled manufacturing.

This is an excellent opportunity for a manufacturing or process engineer who has hands-on TIG welding experience and wants to take ownership of welding-related production processes, while remaining embedded in a broader manufacturing engineering team.

Key Responsibilities

• Support the implementation and optimisation of GTAW (TIG) and orbital welding processes within production

• Assist with development and documentation of welding procedures and work instructions

• Work with design and manufacturing teams to improve weld joint design, fixturing, and manufacturability

• Troubleshoot welding issues on the production floor and support root-cause analysis and corrective actions

• Help establish consistent weld process parameters and quality standards

• Provide hands-on support to production teams including operator training and process guidance

• Participate in continuous improvement initiatives to increase yield, reduce defects, and improve throughput

• Support introduction of new welding equipment, fixtures, and manufacturing processes

• Assist with process qualification, documentation, and internal or customer audits where required

Required Qualifications

• Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, or related discipline preferred

• 3–7+ years of experience in a manufacturing or process engineering role involving TIG (GTAW) welding

• Hands-on experience supporting or working with TIG welding in a production environment

• Exposure to orbital welding processes is strongly preferred

• Experience working with stainless steel tubing or precision welded components is beneficial

• Familiarity with welding standards such as AWS or ASME codes is helpful but not required at an expert level

• Experience troubleshooting manufacturing processes and supporting production teams

• Basic understanding of metallurgy, distortion control, and fixturing concepts

• Experience with SolidWorks or similar CAD tools

• Exposure to automation, PLCs, or welding system controls is a plus

• Knowledge of Lean Manufacturing or Six Sigma practices preferred

• Strong communication skills and ability to collaborate across engineering and production teams

NTS is hiring a Manufacturing Manager in Columbus, MS, for a leading aerospace manufacturer. This is a great opportunity for an experienced production leader to take ownership of operations in a high-precision, fast-paced environment.

Job Title: Manufacturing Manager

Location: Columbus, MS

Reports To: Director of Operations

Salary: $85k plus full benefits (4-day work week)

Company Overview:

Join one of the leading aerospace innovators dedicated to excellence in design, manufacturing, and technology. As a multi-million-dollar industry leader, we are committed to pushing the boundaries of aerospace engineering. We are looking for a passionate and driven Manufacturing Manager to be a key player in delivering high-quality solutions in a fast-paced environment.

Position Overview:

We are seeking an enthusiastic and results-driven Manufacturing Manager who is not only a seasoned leader but also a strong advocate for collaboration, communication, and operational excellence. This is an excellent opportunity for an experienced professional to take ownership of a dynamic manufacturing team and drive efficiency, quality, and safety in our production processes. You will work closely with cross-functional teams to ensure smooth and continuous production, while maintaining our commitment to excellence and innovation.

Key Responsibilities:

• Lead and manage a team of manufacturing supervisors and operators, ensuring effective coordination across all production stages.
• Drive continuous improvement initiatives focused on operational efficiency, quality standards, and cost management.
• Develop and implement production schedules, ensuring on-time delivery of high-quality products.
• Foster a collaborative and positive work environment that emphasizes teamwork, open communication, and mutual support.
• Oversee daily manufacturing activities, ensuring compliance with safety regulations and company policies.
• Utilize Lean, Six Sigma, or other operational methodologies to streamline processes and improve productivity.
• Serve as a liaison between production and other departments (engineering, quality control, procurement) to ensure alignment with overall company goals.
• Provide leadership in troubleshooting, problem-solving, and conflict resolution to address production challenges.
• Conduct regular performance reviews, coaching, and training to develop the team and ensure professional growth and retention.
• Maintain a high level of engagement with team members to ensure morale, job satisfaction, and retention.

Qualifications:

• Required: Prior experience in a manufacturing supervisory or managerial role, ideally within the aerospace or similar high-precision industry.
• Proven track record of successfully leading and motivating teams to achieve production targets.
• Strong communication skills with the ability to clearly articulate goals, expectations, and feedback to staff.
• Demonstrated ability to advocate for teamwork and collaboration in achieving operational goals.
• High level of attention to detail and commitment to quality standards.
• Ability to manage multiple priorities and projects in a fast-paced environment.
• Familiarity with Lean Manufacturing, Six Sigma, and other efficiency-driven methodologies.
• A solutions-oriented mindset with a strong sense of ownership and accountability.
• Strong decision-making and problem-solving abilities.
• Preferred: Experience in the aerospace or automotive industries with a focus on high-precision manufacturing.

Education/Experience:

• A bachelor's degree in Engineering, Manufacturing, or a related field (or equivalent practical experience) is preferred.
• 5+ years of supervisory or managerial experience in a manufacturing environment is preferred.
• Demonstrated longevity in previous roles with a commitment to professional growth and organizational success.

Red Oak Technologies is a leading provider of comprehensive resourcing solutions across a variety of industries and sectors including IT, Marketing, Finance, Business Operations, Manufacturing and Engineering.

Our client is an electronics manufacturer. They are looking for a Manufacturing Technician (Morning / Day Shift) to join their team. This role is a CONTRACT position. Position will be ONSITE. Candidate must be able to commute onsite to San Francisco, CA.

**Morning / Day Shift – 6:00 AM – 2:30 PM – Monday through Friday – Some work on Saturday as needed**

**Gated private parking lot available for contractors**

**$30/hr - $35/hr**

Position Requirements:

• Follow all Safety and Laser Safety procedures and requirements
• Be able to construct, test and calibrate engineering and production robotic and computer-controlled assembly systems using engineering prints, schematics, assembly instructions and engineering direction
• Knowledgeable in high precision measuring equipment, calibration, and detailed record generation

Experienced and Proficient in the following:

• Mechanical hand and power tools
• Oscilloscopes, DMM, Signal Generators, Optics, Cameras
• Laser safety, lasers, laser pattern recognition, beam focus, and active alignment
• Auto dispense and cure of UV adhesive
• Multiple axis, vision assisted, computer controlled robotic assembly equipment in both a R/D and Volume Manufacturing environment
• Identification of “Root” Cause of Manufacturing, Quality and Yield issues
• Microsoft Office, Standard SPC and Flowcharts packages
• Pneumatic actuated Slides, Grippers, etc.
• Hex Pod Tables, Active Alignment
• Excellent reading, writing, and communication skills in English
• Minimum of 5 years industry experience, Lidar Sensor experience preferred but not required
• Be able to stand for long periods of time
• Lift and carry 35 lbs

Red Oak Technologies is made up of people from a wide variety of backgrounds and lifestyles. We embrace diversity and invite applications from people of all walks of life. See what it’s like to be at the top; connect with one of our recruiters and apply today.

Red Oak Tech: Quality | Talent | Integrity

Note: Compensation rates are based on years of experience and/or level of skills relevant to the opportunity.