Cable Remote Control App Jobs in Usa

City of Kirkland

$19.20 - $22.93 Hourly

Kirkland, WA

Seasonal

202100547

Parks & Community Services - Rec. Services Supervisor

12/23/2024

Continuous

Non-Exempt

N/A

Job Summary

The role of the Recreation Lead is to provide outstanding customer service and operational support to recreation programs, facilities, and events within Parks and Community Services. Recreation Leads serve as the on-site City representative and may work at City facilities, athletic fields, school gymnasiums, City parks, and/or off-site program locations. Recreation Leads provide operational support including preparing spaces, leading and monitoring activities, and performing clerical work, and training and leading staff. Recreation Leads may work without on-site supervision.

Recreation Lead may be assigned to:

• Programs, such as youth or adult sports.
• Facilities, such as North Kirkland Community Center, Peter Kirk Community Center, City Hall, or Heritage Hall.
• Events, such as festivals or special events taking place in Kirkland parks or City facilities.

This recruitment is specifically for Recreation Leads who will support City-sponsored events taking place in Kirkland Parks or City facilities. Recreation Leads assigned to events will be responsible for set-up, operation, and tear-down of the City's trailered LED screen during moves in the park.

Distinguishing Characteristics: The Recreation Lead oversees programs, facilities, and events that the Recreation Attendant assists with. This position reports to Program Coordinators and/or Recreation Supervisors.

Essential Functions: Essential functions, as defined under the Americans with Disabilities Act, may include any of the following representative duties, knowledge, and skills. This is not a comprehensive listing of all functions and duties performed by incumbents of this class; employees may be assigned duties which are not listed below; reasonable accommodations will be made as required. The job description does not constitute an employment agreement and is subject to change at any time by the employer. Essential duties and responsibilities may include, but are not limited to, the following:

• Lead, monitor, and oversee programs, facilities, rentals, and events.
• Open, close, and secure facilities and equipment.
• Prepare and distribute paperwork and supplies to program and event locations.
• Transport, set up, and take down equipment for programs and events.
• Greet and assist participants, staff, and the public in person and over the phone.
• Prepare verbal and written reports for staff.
• Report safety concerns and customer feedback to staff.
• Perform miscellaneous clerical tasks.
• Perform minor maintenance and cleaning as needed.
• Perform basic and intermediate functions using program registration software such as enrolling participants, processing refunds, class transfers, and handling cash.

Peripheral Duties:

• Support emergency response efforts within Parks and Community Services.

• Good verbal, written, and telephone communication skills are required.
• Ability to interact courteously with the public to acknowledge both compliments and complaints.
• Ability to work independently and as part of a team.
• Demonstrated good judgement in problem solving and responding to customer needs.
• Proficiency in standard computer software, such as Microsoft Office Suite applications Word, Excel and Outlook
• Excellent organizational and time management skills.

Minimum Qualifications:

• Education: No minimum education requirements.
• Experience: 1 year of customer service experience.
• Or: In place of the above requirements, the incumbent may possess any combination of relevant education and experience which would demonstrate the individual's knowledge, skill, and ability to proficiently perform the essential duties and responsibilities listed above.

Licenses and Other Requirements:

• Must be at least 18 years of age.
• Must have or be able to obtain First Aid/CPR certificate within 90 days of hire.
• May be required to possess a Washington State driver's license and submit a driving abstract, depending on area of assignment
• Must be able to lift and carry 50 pounds and use stairs.

• Experience working special events
• Interest or experience working in community recreation
• Experience operating complex audio/visual equipment
• Ability to list and carry 60 pounds.

Physical Demands and Working Environment: Work may be performed in a variety of indoor and outdoor settings, including City facilities such as community centers, City parks, Lake Washington School District facilities and off-site locations. Work settings may involve high levels of noise, many people, adverse weather conditions, uneven terrain, standing for extended periods of time, and interruptions. Desk assignments are done at a computer terminal.

Facilities and Business Operations:

The Facilities and Business Operations at UCF is dedicated to fostering a conducive educational environment for our faculty, staff, students, and the broader community. We are committed to excellence, providing unparalleled expertise, and maintaining a world-class standard in service.

Please visit us at: or Facebook and Instagram: UCF Facilities

The Opportunity:

The UCF IT department within Facilities and Business Operations is seeking a highly skilled Multimedia Specialist III to play a vital role in delivering exceptional audiovisual (AV) experiences across campus! This position serves as a senior technical leader supporting high-profile university events, advanced multimedia systems, and cross-departmental technology initiatives. The Multimedia Specialist III will oversee event-day operations, provide expert troubleshooting and production support, and collaborate on innovative AV solutions that enhance the university community. In addition, this role serves as a trusted technical resource and assumes leadership responsibilities in the absence of the Multimedia Event Manager.

Responsibilities:

• 
  

• Oversee daily multimedia event operations, including equipment checks, network connectivity verification, and managing audiovisual setups to ensure high quality event production.

  
  

• Operate and troubleshoot multimedia systems, including audio boards, video switchers, live streaming equipment, and integrated web/audio/video conferencing tools.

  
  

• Provide onsite leadership and act as backup for the Multimedia Event Manager during absences.

  
  

• Supervise and mentor student workers, OPS staff, and other multimedia assistants, including tracking labor hours and evaluating performance.

  
  

• Collaborate with end users and project teams to plan and implement audiovisual solutions; perform inspections, user training, and project closeout.

  
  

• Maintain documentation, follow standard operating procedures, and perform ticketing, reporting, and service-level tracking in ServiceNow.

  
  

• Pursue ongoing professional development by attending training, maintaining certifications, and documenting completed training.

  
  

• Support departmental teams with equipment troubleshooting, inventory maintenance, vehicle and equipment upkeep, and technical support for high-profile events.

  
  

Minimum Qualifications:

Bachelor's degree and 4 years of relevant experience; or High School Diploma (or equivalent) and 8 years of relevant work experience in lieu of degree oran equivalent combination of education and experiencepursuant toFla. Stat. 112.219(6).

Preferred Qualifications:

• 
  

• 6+ years of experience operating professional audiovisual and broadcast-quality production systems, including microphones, audio boards, PTZ cameras, and video mixers, with advanced expertise in speaker deployment, microphone placement, system tuning, and live sound optimization across varied venues.

  
  

• Experience with AV over IP technologies, structured cable management, and Crestron control systems, including NVX.

  
  

• Proficiency with ServiceNow or comparable ticketing/IT service management (ITSM) platforms.

  
  

• Bachelor's degree in Digital Media, Audio Engineering, Information Technology, or a related field.

  
  

• Demonstrated supervisory and event-day leadership experience within a multimedia or live event production environment, including coordinating daily operations, delegating assignments, evaluating performance, and serving in a lead or backup management capacity.

  
  

• Advanced troubleshooting experience with complex AV systems, including networked AV environments, conferencing integrations, and live streaming platforms.

  
  

• Working knowledge of network infrastructure concepts, including VLANs and DHCP.

  
  

• Strong project coordination skills with experience collaborating with stakeholders, vendors, and cross-functional technical teams on AV installations, upgrades, or system implementations.

  
  

• Relevant certifications such as CTS/CTS-I, Crestron, Extron, QSC, or other industry-recognized audiovisual credentials.

  
  

• Excellent communication skills, with the ability to train, mentor, and support staff, student workers, and end users.

  
  

• Demonstrated ability to perform effectively in high-profile, fast-paced event environments with strong attention to detail and a customer service-oriented approach.

  
  

Special Instructions to the Applicants:

This role includes supporting events outside of standard business hours, including evenings, weekends, and occasional holidays, to ensure seamless multimedia operations.

Position requires a valid Class E driver's license. This position may involve driving to various locations on and off campus to conduct University business.

The anticipated salary range for a well-qualified candidate for this position is $68,637 - $74,940. The final salary will be determined based on the candidate's qualifications, experience, and internal equity considerations.

Applicant must be authorized to work for any U.S. employer, as sponsorship is not available for this position.

Are you ready to unleash YOUR potential?

As a next-generation public research university and Forbes-ranked top employer in Florida, we are a community of thinkers, doers, creators, innovators, healers, and leaders striving to create broader prosperity and help shape a better future. No matter what your role is, when you join Knight Nation,you'llplay an integral role at one of the most impactful universities in the country.You'llbe met with opportunities to connect and collaborate with talented faculty, staff, and students across 12colleges and multiple campuses, engaging in impactful work that makes a positive difference. Your time at UCF will provide you with many meaningful opportunities to grow,you'llwork alongside talented colleagues on complex projects that will challenge you and help you gain new skills,andyou'llhave countless rewarding experiences that go well beyond a paycheck.

Working at UCF has itsperks!UCF offers:

• Benefitpackages, including Medical, Dental, Vision, Life Insurance, Flexible Spending, and Employee Assistance Program

• Paid time off, including annual and sick time off and paid holidays

• Retirement savings options

• Employee discounts, including tickets to many Orlando attractions

• Educationassistance

• And more...For more benefits information, view theUCF Employee Benefits Guide.

Dive intoourTotal Rewards Calculatorto discover the diverseselectionavailable to you, giving you a glimpse into the benefits that together shape your comprehensive rewards package at UCF.

Unless explicitlystatedon the job posting, it is UCF's expectation that an employee of UCF willresidein Florida as of the date the employment begins.

Department

Work Schedule

Type of Appointment

Expected Salary

Job Posting End Date

As a Florida public university, the University of Central Florida makes all application materials and selection procedures available to the public upon request.

UCF is proud to be a smoke-free campus and an E-Verify employer.

If an accommodation due to a disability is needed to apply for this position, please call or email .

For general application or posting questions, please email .

• 
  
• Two-year technical degree or four-year non-technical degree
  
• At least 4 years of relevant experience in telecommunications design and construction industry
  
• Knowledge & application of telecommunications industry association (TIA) standards
  
• Knowledge & application of BICSI (Building Industry Consulting Services International) design practices
  
• Knowledge & application of NFPA 70 (NEC) and electrical design requirements
  
• Experience leading a telecommunications design team
  
• Knowledge of design and construction specifications
  
• Experience estimating and scheduling small to medium size projects
  

• 
  
• Associate degree
  
• At least 3 years of telecommunications design experience in semiconductor or data centers
  
• Project management experience
  
• Working knowledge of 3D BIM software (Revit)
  
• Knowledge and design experience with paging, intercom, and audio-visual systems
  
• Knowledge of control systems and network topology
  
• One or more of the following certifications: RCDD (Registered Communications
  
• Distribution Designer), DCDC (Data Center Design Consultant), OSP (Outside Plant), or RTPM (Registered Telecommunications Project Manager)
  

Under limited to moderate supervision, provides technical solutions to faculty, staff, and students for all aspects of classroom Academic Technologies, including but not limited to displays, complex audio and control systems, and lecture capture software. Significant focus on IP based network audio and visual (AVOIP) academic technology primarily comprised of Extron, QSC, and Dante environments. Ability to work independently as a subject matter expert with an emphasis on learning new skills through training and certifications.

All work and results are documented within a ticketing application. Learning Environments specialists are dispatched to provide hands-on support when a remote solution is not available. Must be able to work within an ITIL, metrics driven environment. All work is guided by the published ITIL Service Operations Framework. Each individual is expected to coordinate with our Service Desk and Mobile Action teams to deliver fully comprehensive support. Must be capable of remote, phone, and chat support, as well as on-site visits and working a service counter. All IT Support Specialists work in a 0-3 Tiered support environment. Any specialist may be required to work in any of the four tiers as needed.

IT Support Specialists (ITSS) are expected to understand and follow consistent defined processes for all service interactions, while observing established standards. The ITSS focuses on continual improvement of their own skills as well as the documented service and troubleshooting processes used by the myIT division.

Hours of operation will vary with season and semester schedule and may include limited nights and/or weekend work.

• 
  
• At all times employees are expected to uphold Creighton's core values and demonstrate commitment to valuing diversity and contributing to an inclusive working and learning environment, while adhering to all University Ethical Standards of Conduct, rules, regulations, and job requirements, including required educational trainings.
  
• Assists users, via on-site visits and/or remote tools, in troubleshooting and resolving hardware and software issues related to classroom and conference room technologies. This includes but is not limited to AV hardware and computer software. Solves moderately complex problems and may coordinate required effort from multiple support groups, including outside vendors.
  
• Basic operational support and team awareness. All workflow and results are documented in a ticketing application. Process and knowledge documentation via Knowledge Base Articles. Communication amongst team members for purposes of cross training.
  
• Preventative maintenance and testing of high-impact classrooms and conference rooms to maintain peak functionality and minimize impact to end-users.
  
• Continuous pursuit of training and certifications relative to existing AV environment and industry changes.
  
• Team meetings and other duties as assigned.
  
• Training of end-users on basic functionality of AV hardware and lecture capture software in classroom and conference room spaces.
  

Qualifications:

• 
  
• Bachelor's degree in related area and/or equivalent technical certification and experience desired.
  
• Minimum of 2 years combined experience in one or more of the following:
  
• Basic understanding of TCP/IP function, network topologies, and related technology
  
• Supporting classroom A/V technology including:
  
  • 
    
  • Qsys AV cores, peripherals, and designs
    
  • Extron NAV including encoders and decoders
    
  • Dante monitoring and source routing
    
  • Hardware such as monitors, speakers, and cabling.
    
  
  
• Windows and Apple environment experience required.
  

Knowledge, Skills, and Abilities:

• 
  
• Experience with video conferencing such as Zoom, Teams, and/or Webex.
  
• Basic understanding of AV signal flow.
  
• Basic ability to read AV room diagrams
  
• Comfortable with technical training for a small to medium 2-20 person group.
  
• Experience creating technical documentation.
  
• Proven ability to work with a team to deliver value based solutions to partners.
  
• Strong interest in in learning about AVoIP and Audio Vistual technology.
  
• Proficient in Microsoft Office applications;
  
• Accountable
  
• Adaptable
  
• Collaborative and teamwork-oriented
  
• Customer relationship manager
  
• Innovative and creative thinker
  
• Mission and service-oriented
  
• Openness (zest) for learning
  
• Results-oriented
  
• Excellent communication skills
  
• Professional phone etiquette
  
• Self-starter
  
• Detail-oriented
  
• Dependable
  

Licenses/Certifications:

Avixa CTS, Extron ECS, Extron NAVS, Q-Sys Design Level 1, or equivalent documented experience working with these technologies preferred.

Must have a current and valid driver's license with a clean driving record for the last 3 years and no major violations within the last 5 years;

ITIL Foundations Certification or pass within first 6 months of employment

Position: Biomedical Engineer

Start: 3/23 to 3/30

Length: 6 months

Onsite Expectations: Onsite daily – 6:00A-3:20P Shift

Client Location: Palo Alto, CA

Rate: $54/hr (W-2 Only)

Job Scope/Skills:

• Philips Intellivue stabilization and optimization
• Device Removal/Installation/ Medical Equipment Certification
• Disinfectant wipe-down of all equipment entering hospital
• Functional testing of all medical equipment per manufacturer guidelines or within the SHC Biomed standard operating procedures
• Electrical safety testing of all electrical medical equipment
• Validation of any vendor setup equipment
• Calibration of medical equipment to meet medical equipment manufacturer tolerances
• Ensure all “Tech Connected” devices have proper network connection
• Network set up for all Philips Patient Monitoring devices
• Final physical setup and configuration of general medical equipment
• Application of SHC Biomed equipment control number tag and other Stanford sticker on medical equipment
• RTLS tagging of identified medical equipment
• Serial number and MAC address gathering for “Tech connected” medical equipment
• Proficiency of CMMS Database entry: Connectiv
• Cable management per SHC IT/ Biomed standards
• Run through application test scripts for Biomed Systems: Philips, Stryker, HillRom, SPD Devices and Biomed contributor applications
• Ensure Biomed medical equipment environment is safe; all medical equipment fixtures such as stands, arms and mounts must be properly secured.
• Waste removal

About the Role

We are looking for a Power Electrical Engineer to join our engineering team. This individual will help design, size and specify power distribution from MV though LV. This person will be involved in concept investigation, system verification, design through successful installation.

Basic Qualifications & Responsibilities

• Proven expertise in the design, testing, troubleshooting, and maintenance of low- and medium-voltage AC distribution systems, including power distribution, control systems, and wiring.
• Collaborate with sales, engineering, and other technical teams to ensure cohesive project execution.
• Experience in the development of electrical construction packages comprised of:
• Single Line Diagrams
• Three Line Diagrams
• Schematics/Elementary Diagrams
• Interconnection Diagrams
• Written narratives
• Proficient in interpreting and applying electrical schematics, mechanical drawings, and technical diagrams to support system design and troubleshooting.
• Understanding of 3 Phase Power Systems, Power Factor correction, Harmonics mitigation.
• Interpret/Draft AC Distribution schematic drawings.
• Ability to load balance and perform load calculations.
• Knowledgeable of the requirements detailed in the National Electrical Code (NEC) and National Electrical Safety Code (NESC).
• Experience with power system modeling tools - ETAP preferred.
• Adept at the use of Microsoft Office Suite and AutoCAD. Knowing Revit is a plus.
• Communicate effectively with both the business and technical teams.
• Strong analytical and problem-solving skills to tackle complex engineering challenges.
• Familiar with Automotive standards and specification.
• Technical Support: Provide technical support and troubleshooting for Power Platform solutions, identifying, and resolving issues promptly.
• Documentation: Create and maintain detailed technical documentation for solutions, workflows, and processes, ensuring knowledge transfer and continuity.
• Familiarity with various cable types (e.g., multi-conductor, fiber optic, coaxial, twisted pair, power) and their specifications for system integration and performance.

Required Qualifications

• Bachelor’s degree in Electrical Engineering from an accredited institution and minimum of 7 years in power distribution applications.
• Legally authorized to work in the United States without company sponsorship now or in the future.
• Must possess and maintain a valid and unrestricted driver’s license and US Passport with no travel restrictions.

Required Skills

• Proven expertise in the design, testing, troubleshooting, and maintenance of low- and medium-voltage AC distribution systems.
• Collaborate with sales, engineering, and other technical teams.
• Proficient in interpreting and applying electrical schematics.
• Understanding of 3 Phase Power Systems.
• Ability to load balance and perform load calculations.
• Knowledge of NEC and NESC requirements.
• Experience with ETAP.
• Adept at Microsoft Office Suite and AutoCAD.
• Strong analytical and problem-solving skills.

Preferred Skills

• State of Michigan PE License.
• Master’s degree in EEGM automotive standards.

Hazelett Strip Casting Machines combine the functions of mechanical, electrical, heat transfer and automation to produce materials for many applications. Our continuous casting process is renowned for its high productivity and energy efficiency. We pride ourselves on our robust machine design and in-house manufacturing and assembly capabilities. The materials produced by our machines are used in many applications such as aluminum automotive components, aluminum foil products, lead-acid automotive batteries, and copper wire. If you are detail-oriented and quality-conscious individual with a strong work ethic, let’s connect!

What you will do:

• Maintain a safe, organized, and clean work environment.
• Reads and interprets blueprints, sketches, and CAD design.
• Select appropriate cutting tools, work holding fixtures, and materials for the job.
• Loading material into CNC machines and performing safe and accurate set-up.
• Performs a variety of complicated tasks with the use of complex measuring equipment.
• Operating lifting devices in a safe manner (forklifts, overhead cranes).
• Willing to work Overtime when required to meet deadlines.
• Other duties as assigned.

We are hiring for all shifts to work full time:

1st Shift, flexible schedule options:

• 5x8 Mon – Fri (7:30 am – 4:00 pm)
• 4x10 Mon-Thu / Tues-Fri (6:30 am – 5:00 pm)

2nd and 3rd shift available, 4x10 schedule options Monday - Thursday: *20% shift premium

• 2nd Shift: 4:45 pm – 2:45 am
• 3rd Shift: 8:45 pm – 6:45 am

What you will bring:

• A “Safety First” mindset
• 3+ years of CNC & Manual Machining Experience with tight tolerance and various materials.
• Ability to interpret code/programs and make minor adjustments when necessary.
• Experience using precision measuring equipment (verniers, micrometers, bore gauge, depth gauges, etc.)
• Ability to work in a physically demanding environment, including standing for long periods and performing repetitive tasks.
• Strong communication and interpersonal skills (written & verbal)
• Blueprint Reading, ability to follow written procedures and verbal instructions.
• Forklift, overhead crane, & rigging experience
• Familiarity with common PPE
• Basic understanding of quality control principles.

What we offer you:

20% shift premium.

• Hazelett offers 24 plans through its medical coverage and for most of the plans, Hazelett pays 100% of the premiums.
• Hazelett pays 100% of Dental Premiums for one of the best plans in the state.
• Life, AD&D, Short-Term Disability Insurance.
• Matching 401k after 90 days. Fully vested since you start contributing!
• 8 Company Holidays.
• 4 weeks of paid time off.
• On-site Athletic Trainer.
• Free uniforms with cleaning.
• Free use of our company beach on Malletts Bay and boat mooring at a discounted price.

Why you want this opportunity:

At Hazelett you will have the opportunity to work for a company that is recognized worldwide for our leading metals processing technology. Our continuous casting process is renowned for its high productivity and energy efficiency. We pride ourselves on our robust machine design and in-house manufacturing and assembly capabilities. The materials produced by our machines are used in many applications such as aluminum automotive body components, aluminum foil, lead-acid automotive batteries, and copper wire and cables.

Hazelett is passionately committed to a diverse, equitable, and inclusive work culture. Join us in building a community where differences are our strength, and where everyone has an equal chance to thrive.

Cable Assembler

6 month contract (good chance at FTE conversion)

Onsite in Poway, CA

Client in defense industry

Job description:

Our client is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

Under general supervision with detailed instruction for new work or a special assignment, this position is responsible for performing a wide variety of repetitive or standard electronic and /or mechanical assemblies and subassemblies. Determines and/or follows methods and sequence of operations in performing assembly tasks such as wiring, component installation, hand soldering and cable harnessing on assembly units. May monitor and verify quality in accordance with control procedures.

DUTIES AND RESPONSIBILITIES:

· Assembles components, assemblies or sub-assemblies.

· Makes setups and adjustments holding tolerances to specifications.

· May perform duties as required in assembly of electronic equipment such as cables, harnesses, chassis, and printed circuit boards, or may perform mechanical assembly of panels, LRU's, batteries, and servo motors.

· May disassemble, modify, rework, and reassemble assemblies or subassemblies.

· Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company.

· Expected to work in a safe manner in accordance with established operating procedures and practices.

· Additional Functions:

o May assist in training lower level assemblers.

o Performs housekeeping and cleanup duties upon completion of assigned tasks.

o Other duties as assigned or required.

Requirements:

The ideal candidate will possess the following qualifications:

· Typical requires a high school diploma or equivalent and three or more years experience.

· Must be customer focused and possess:

o The ability to read and interpret engineering drawing and wire lists.

o Good understanding of the general aspects of the job with limited technical comprehension.

o Knowledge of computer operations and applications pertinent to the position.

o Familiarity with use of soldering and compression connection tools.

o Good visual perception and ability to distinguish between colors.

· The ability to work independently or in a team environment is essential as is the ability to work extended hours as required.

· Ability to obtain and maintain DoD Security Clearance is required.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

An Electronics Lab Assembly/Solder Technician is responsible for assembling, cabling, and validating complex testing rack test systems. This includes building and repairing cables and connector assemblies as a critical part of the role. Additional responsibilities include assembling and configuring rack-mounted devices, troubleshooting and diagnosing system issues, and performing functional validations to ensure assembly quality and performance. Additional activities may include basic soldering, fabricating test boxes, or supporting other hardware integration tasks.

The candidate may provide on-the-job recommendations to solve hardware integration issues with mid and upper-level Engineering and Leadership. The candidate will comply with the company’s FOD program, tool control program, and all safety regulations.

Work primarily includes cabling and assembly of Rack-mounted Test Systems but may also include working with Engineering prototyping.

This position is 100% onsite in Huntsville, Alabama

What you will do

• Assemble and configure rack-mounted devices, troubleshooting and diagnosing system issues, and performing functional validations to ensure assembly quality and performance.
• Perform other activities such as basic soldering, building or repairing cables and connector assemblies, or fabricating test boxes.
• Perform pin crimping, wire routing, and use hand and powered tools.
• Test and troubleshoot systems using multimeters and other diagnostic tools.
• Provide on the job recommendations to solve hardware integration issues with mid and upper-level Engineering and Leadership.
• Perform physical tasks such as retrieving, storing, and installing equipment.
• Work from detailed assembly drawings, schematics, or work instructions.

• Work from verbal instructions and conceptual ideas to a achieve a desired output.
• Recognizing failures and isolating problems and suggesting appropriate corrective action.
• Keeping management appraised of all unresolved and/or potential problems that would negatively affect schedules or quality.
• Manage inventory, paperwork, and maintain organizational standards.

Qualifications You Must Have

• High School Diploma or equivalent (GED) and A minimum of 2 years of work experience.
• Assemble and configure rack-mounted test systems, cables, and harnesses
• Verification/Inspection experience with associated standards, processes, and documentation.

Qualifications Preferred

• Work experience with mechanical and soldering standards, processes, and documentation.
• Experience working within an Engineering Technical Support Environment.
• Ability to read and comprehend instructions, short correspondence, memos, schematics, detailed electronic blueprints, and other similar authorized drawings and documents.
• CCA manufacturing experience.
• Knowledge of Fabrication Standards, Processes, and Documentation.
• IPC J-STD-001 solder certification and IPC 610 and IPC 620 certifications
• Associates Degree in a Technical field.

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

‒ Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Information

Huntsville, Alabama, earned the nickname "ROCKET CITY" for its close association with U.S. space research since 1950. RTX has been here since the early years, having launched its Huntsville operations as the Raytheon Company in 1948. Some of the brightest minds in aerospace and defense call it home. Can you see yourself here?

Huntsville Location information: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon Missiles & Defense, you have the opportunity to try new things and make a bigger difference across a broader end-to-end solution, a richer technology and product set, an expanded range of disciplines, a growing global footprint and a more diverse team of colleagues and customers.

An Electronics Lab Assembly/Solder Technician is responsible for assembling, cabling, and validating complex testing rack test systems. This includes building and repairing cables and connector assemblies as a critical part of the role. Additional responsibilities include assembling and configuring rack-mounted devices, troubleshooting and diagnosing system issues, and performing functional validations to ensure assembly quality and performance. Additional activities may include basic soldering, fabricating test boxes, or supporting other hardware integration tasks.

The candidate may provide on-the-job recommendations to solve hardware integration issues with mid and upper-level Engineering and Leadership. The candidate will comply with the company’s FOD program, tool control program, and all safety regulations.

Work primarily includes cabling and assembly of Rack-mounted Test Systems but may also include working with Engineering prototyping.

This position is 100% onsite in Huntsville, Alabama

What you will do

• Assemble and configure rack-mounted devices, troubleshooting and diagnosing system issues, and performing functional validations to ensure assembly quality and performance.

• Perform other activities such as basic soldering, building or repairing cables and connector assemblies, or fabricating test boxes.

• Perform pin crimping, wire routing, and use hand and powered tools.

• Test and troubleshoot systems using multimeters and other diagnostic tools.

• Provide on the job recommendations to solve hardware integration issues with mid and upper-level Engineering and Leadership.

• Perform physical tasks such as retrieving, storing, and installing equipment.

• Work from detailed assembly drawings, schematics, or work instructions.

• Work from verbal instructions and conceptual ideas to a achieve a desired output.

• Recognizing failures and isolating problems and suggesting appropriate corrective action.

• Keeping management appraised of all unresolved and/or potential problems that would negatively affect schedules or quality.

• Manage inventory, paperwork, and maintain organizational standards.

Qualifications You Must Have

• High School Diploma or equivalent (GED) and A minimum of 4 years of work experience.

• Assemble and configure rack-mounted test systems, cables, and harnesses

• Verification/Inspection experience with associated standards, processes, and documentation.

Qualifications Preferred

• Work experience with mechanical and soldering standards, processes, and documentation.

• Experience working within an Engineering Technical Support Environment.

• Ability to read and comprehend instructions, short correspondence, memos, schematics, detailed electronic blueprints, and other similar authorized drawings and documents.

• CCA manufacturing experience.

• Knowledge of Fabrication Standards, Processes, and Documentation.

• IPC J-STD-001 solder certification and IPC 610 and IPC 620 certifications

• Associates Degree in a Technical field.

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

‒ Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Information

Huntsville, Alabama, earned the nickname "ROCKET CITY" for its close association with U.S. space research since 1950. RTX has been here since the early years, having launched its Huntsville operations as the Raytheon Company in 1948. Some of the brightest minds in aerospace and defense call it home. Can you see yourself here?

Huntsville Location information: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing South Carolina (BSC) is looking for Electrical Equipment Design and Installation Engineer (Experienced or Senior) to join our Equipment Installation team in North Charleston, South Carolina.

Position Overview:
Boeing South Carolina is the home of the 787 Dreamliner. Our team designs, builds and delivers the 787 Dreamliner family of airplanes to customers all over the world. The industry-leading technology of the 787 Dreamliner is creating remarkable opportunities for airlines around the world and dramatically improving the air travel experience. We create a better way to fly for the passengers with more comfort and less fatigue like non-other in the air. We call it the Dreamliner effect.

Want to know how aerospace innovations get off the ground? Join us today to be part of our many diverse teams that come together to create an airplane that lives up to Boeing’s principles of safety, quality, and integrity. You will learn more about the people and the products leading the way to the future of air travel. If, this sounds like you and the culture you would like to be part of, we invite you to apply to this role.

Primary Responsibilities:

• Develops and maintains basic electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).

• Develops and maintains basic cable/wire harness detail and assembly designs. Assists with engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests).

• Follows documented processes, specifications and procedures that support the design and manufacture of electrical commodities.

• Collects data to support the development of statements of work.

• Assists in data gathering of supplier capabilities.

• Reviews functional and physical input used in the development of integrated design and system architecture.

• Individual shall be able to work under general direction

Work Authorization:
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at North Charleston, SC.

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement.

• 3+ years of experience with wire design/wire harness installation and/or equipment installation.

• 3+ years of experience working with computer aided design (CAD) such as CATIA, Solidworks, Siemens, NX.

Preferred Qualifications (Desired Skills/Experience):

• 5+ years of related work experience or an equivalent combination of education and experience.

• Experience in Model-Based Definition (CATIA V5 or higher, Solidworks, Siemens, NX), ENOVIA, and PDM

• Experience using all the Microsoft Office Applications (Word, Excel and PowerPoint)

• Ability to quickly adapt to program tools and procedures

• Knowledge and ability to understand and interpret engineering drawings.

• Skill and ability to collect, organize, synthesize, and analyze data; summarize findings; develop conclusions and recommendations from appropriate data sources.

Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union statement:
This is a not a union-represented position.

Pay and Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary Pay Range:

• Experienced (Level 3): $112,200 - $151,800

• Senior (level 4): $136,850 - $185,150

Applications for this position will be accepted until Mar. 21, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Summary

Vertiv is seeking a highly skilled Electrical Systems Engineer to join our team and focus on the design, development, and validation of Static Transfer Switch (STS) and Power Distribution Unit (PDU) 3-phase power products. The ideal candidate will have deep knowledge of electrical systems, including industry standards, controls and monitoring systems, circuit breaker specifications, and system performance. The engineer will play a critical role in ensuring our products meet customer requirements and perform reliably in the field.

This position will be based onsite at our Delaware, OH facility.

Responsibilities:

• Lead the design and development of STS and PDU 3-phase power products, ensuring compliance with relevant industry standards (UL, IEC, NEC, etc.) and customer specifications.
• Work closely with product mangers and project engineers to understand technical requirements and translate them into detailed engineering specifications.
• Specify site planning data, including power distribution layouts, cable sizing, and environmental considerations to ensure successful product integration.
• Specify circuit breakers and develop circuit breaker coordination schemes to optimize protection and reliability in power distribution systems.
• Develop control system designs and schematics by integrating Vertiv’s digital and analog controls for monitoring and managing power distribution systems.
• Develop and execute test plans to validate the thermal performance, electromagnetic interference (EMI), metering and controls accuracy/performance, and withstand fault performance of the STS and PDU units.
• Ensure that all designs and implementations adhere to the latest industry standards and regulatory requirements.
• Prepare detailed technical documentation, including design specifications, test reports, and schematics. Review and provide feedback for user manuals and other customer facing documentation.
• Work closely with cross-functional teams, including mechanical engineers, firmware developers, and manufacturing teams, to ensure the seamless integration and deployment of products.
• Identify areas requiring process improvement or documentation. Work with management to execute improvements.

Requirements:

• Bachelor’s Degree in Electrical Engineering; Master's Degree a plus
• 3 plus years of experience in product development and testing.
• Ability to analyze and resolve complex problems with minimal guidance.
• Experience with 3 phase power and conversion/conditioning products preferred, but not required.
• Understanding of industry standards (UL, IEC, NEC) and their application in product design and development
• Proficient in Microsoft Outlook, Excel, PowerPoint, and Word.
• Strong communication and organizational skills with ability to summarize technical data/results quickly for non-technical audiences.
• Mostly sedentary desk work, must be able to occasionally work in a power test lab environment, including lifting objects, running cables, or stepping over/around objects
• Ability to lift and carry up to 25 pounds.
• Travel as required, domestic and international, 0-10%

The successful candidate will embrace Vertiv’s Core Principals & Behaviors to help execute our Strategic Priorities.

OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion.

OUR STRATEGIC PRIORITIES

• Customer Focus

• Operational Excellence

• High-Performance Culture

• Innovation

• Financial Strength

OUR BEHAVIORS

• Own It

• Act With Urgency

• Foster a Customer-First Mindset

• Think Big and Execute

• Lead by Example

• Drive Continuous Improvement

• Learn and Seek Out Development

About Vertiv

Vertiv is a $10.2 billion global critical infrastructure and data center technology company. We ensure customers’ vital applications run continuously by bringing together hardware, software, analytics and ongoing services. Our portfolio includes power, cooling and IT infrastructure solutions and services that extends from the cloud to the edge of the network. Headquartered in Columbus, Ohio, USA, Vertiv employs around 31,000 people and does business in more than 130 countries. Visit to learn more.

Work Authorization

No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.

Equal Opportunity Employer

Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to

Description

General program information and/or position overview.

Leidos is seeking a skilled and detail-oriented Electronics Technician to contribute to cutting-edge engineering efforts within our Undersea Systems Division (USD). This role is a unique opportunity to drive innovation in underwater vehicle systems, maritime sensors, subsea telemetry, and ISR solutions that support critical defense and national security missions at Naval Information Warfare Center, Pacific (NIWC PAC).

Leidos’ USD is a recognized leader in C4ISR technologies, delivering innovative, mission-critical solutions across sensor networks, unmanned systems, and tactical platforms. We’re known for achieving “industry firsts” in the most challenging maritime domains.

The selected candidate will be part of an elite, top-notch group responsible for the development, manufacture, and testing of electro-mechanical devices for use with Unmanned Vehicles and other undersea systems and maritime mission applications. This individual will work closely with the government engineering team through all project phases. The ideal candidate will perform assembly, installation, testing, and evaluation of precision underwater products as directed by engineering and lead integration personnel. They will also be able to read, interpret, and work with engineering schematics and drawing markups to produce mission-ready equipment.   Tasking may include soldering, circuit board repairs, wire harness construction, mechanical assembly, boat operations/installations, bench testing, cable construction, fiber-optic systems, high-power systems, communication networks, and molding & encapsulation. Handling highly delicate scientific instruments is required. Travel for test events and installations may be required.     

Join us and be part of a world-class team delivering unmatched solutions for today's most pressing maritime missions. 

This position will require the candidate to hold a Secret Clearance.

This position will require the candidate to work a 9/80B schedule (80 hours of work into nine days over a two-week period, allowing for every other Friday off) to align with the NIWC government team.

• Primary Responsibilities.
• Assemble, test, and troubleshoot small, printed circuit boards, adhering to soldering quality standards such as IPC-A-610 or equivalent
• Perform precision silicon molding for components that meet high-performance standards
• Conduct cable terminations with accuracy, ensuring long-term reliability
• Build and test wiring harnesses
• Assemble mechanical hardware (from small board-level items all the way up to large infrastructure-type assemblies)
• Able to troubleshoot and correct electrical and mechanical issues
• Perform in-lab testing
• Manage logistics to include shipping, receiving, and material control
• Stock, pack, and load trailers/containers for out-of-area testing
• Verify system functionality using advanced electronic testing tools, such as soldering stations, multimeters, oscilloscopes, and environmental simulators
• Collaborate with engineers and team members to improve production processes and address technical challenges
• Maintain detailed documentation of work performed and adhere to safety and quality standards
• Apply innovative problem-solving techniques to resolve technical challenges in high-stakes environments
• Requires frequent movement around piers, docks, and facility spaces
• Required to transport or lift objects weighing up to 50 pounds across the facility
• Requires constant use of hands/fingers to operate machinery, tools, or computer equipment
• Requires ability to move about the warehouse, stoop, kneel, or reach for extended periods
• Ability to climb ladders up to 20 ft
• Able and willing to work aboard marine vessels of various sizes, sometimes overnight
• Requires work in various temperatures and inclement weather
• Required work in /or in loud production environments

• Basic Qualifications.
• High school diploma or equivalent; associate degree or certification in electronics or a related field preferred.
• Proficiency in cable and wire termination methods for both wet and dry applications, including various connectors.
• Proficiency in both Through-Hole and Surface-Mount Technologies and assembly practices, with adherence to established standards.
• Ability to assemble printed circuit boards with components as small as 0201 under a microscope.
• Strong skills in using tools such as soldering irons, multimeters, and oscilloscopes.
• Attention to detail and problem-solving capabilities in working with precise electronic components.
• Ability to interpret technical drawings and schematics.
• Excellent communication and teamwork abilities.
• Proven ability to solve problems creatively and effectively, even with constrained resources or incomplete information.
• Must be flexible and responsive to customer needs.
• Must be well-organized and detail-oriented.
• Ability to work on several projects concurrently.
• Familiarity with hand and power tools such as electric drills, saws, landscaping tools, etc.
• US Citizenship.
• Must be able to receive a DoD Secret security clearance if not already active.

• Preferred Qualifications.
• Knowledge of industry standards and quality assurance practices for electronic systems.
• Experience in a manufacturing or laboratory environment, particularly with high-performance systems.
• Familiarity with advanced troubleshooting techniques for small electronic components.

SUBSEAMSS

If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares.

For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.

The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

About Leidos

Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit and Benefits

Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at Your Data

Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at

If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the U.S. Federal Trade Commission.

Commitment to Non-Discrimination

All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Senior Buyer

Humanoid is the first AI and robotics company in the UK, creating the world’s most advanced, reliable, commercially scalable, and safe humanoid robots. Our first humanoid robot HMND 01 is a next-gen labour automation unit, providing highly efficient services across various use cases, starting with industrial applications.

Our Mission

At Humanoid we strive to create the world’s leading, commercially scalable, safe, and advanced humanoid robots that seamlessly integrate into daily life and amplify human capacity.

What You’ll Do:

• We are seeking an experienced Senior Buyer for an operational procurement role focused on P2P execution, supplier communication, and tactical sourcing support across Humanoid’s direct material commodity. The role supports the Procurement Manager, you will partner with teams in London, Boston, and Vancouver in delivering continuity of supply, cost performance, and operational excellence across Mechanical, Electronics, Electromechanical, Cables & Harnessing, and Software commodities.
• Operational Responsibilities
• Conduct market research to identify cost‑saving opportunities and understand price trends and supply risks.
• Support sourcing initiatives, including RFx processes, negotiations, and contract execution.
• Drive cost, lead‑time, and efficiency improvements with measurable KPIs.
• Capture business requirements and translate them into clear commercial packages.
• Negotiate optimal commercial terms (pricing, payment terms, lead times, Ts & Cs).
• Conduct price analysis and cost‑breakdown validation to ensure fair and equitable pricing.
• Process requisitions and purchase orders in line with procurement policies.
• Maintain accurate PO and supplier data within SAP and associated systems.
• Resolve supplier performance issues, discrepancies and understand the escalation process.
• Communicate to internal stakeholders as appropriate.
• Minimize risk to continuity of supply by carrying out supplier risk assessments for the portfolio’s suppliers and implementing corrective actions as required.
• Support continuous improvement of procurement processes, documentation, and tools.
• Deliver KPI’s relating to cost, cash, quality, service and continuity of supply for the commodity proposals.
• Run MRP (SAP) and ensure timely availability of direct goods and services.
• Experience of implementing Supplier Relationship Management techniques / tools with suppliers (RMMs, Score Cards, Monthly Performance Reviews (MPRs), Communications Plans, Risk Management, DnB report, Sanctions list etc.)
• Support Production, Engineering, Quality, and Planning teams to meet manufacturing needs.
• Directly support the Procurement Managers in the regional area
• This role supports the Commodity teams in sourcing activities but does not own commodity strategy or supplier selection decisions

We’re Looking For:

• Experience & Qualifications
• 5+ years of direct procurement experience, ideally in manufacturing, robotics, technology, aero /defense or automotive
• Proven experience working within scaling direct procurement functions.
• Degree in Business, Law, Engineering, or related field.
• CIPS (MCIPS) Level 5 or equivalent; APICS CPIM desirable.
• Strong understanding of contract law, commercial terms, and negotiation frameworks.
• Awareness of export controls (including EAR) relevant to robotics and technology.
• Technical Skills
• Proficient in Google Workspace, Slack, and database management.
• Experience with MRP/ERP systems; SAP highly desirable.
• Good analytical, numerical, and planning capabilities.
• A good understanding of the Legal Aspects associated with contracting within the Robotics & AI industry
• Procure-2-Pay and tactical procurement experience (Essential) across the following direct commodities pillars
• Mechanical Systems
• Electronics & Electrical
• Electromechanical Systems
• Cables & Harnessing
• Software & Digital Licensing (P2P support)
• Behavioral Skills
• Good negotiation, influencing, and stakeholder‑management skills.
• Ability to work cross‑functionally in a fast‑paced, engineering‑driven environment.
• Highly organized, adaptable, and able to manage shifting priorities.
• Professional, motivated, and able to operate autonomously.

What We Offer:

• Competitive salary plus participation in our Stock Option Plan
• Paid vacation with adjustments based on your location to comply with local labor laws
• Travel opportunities to our London and Vancouver offices
• Comprehensive health insurance coverage
• Freedom to influence the product and own key initiatives
• Collaboration with top‑tier engineers, researchers, and product experts in AI and robotics
• Startup culture prioritising speed, transparency, and minimal bureaucracy

KGS Group is seeking a Senior Electrical Engineer to join our growing practice in Bellevue, WA or Granite Bay, CA.

About Us

We are KGS Group, an employee-owned, multidisciplinary engineering consulting firm serving clients throughout North America. We’re different than traditional engineering firms. We believe a commitment to lasting relationships is just as critical as the expertise applied in our work. To us that means we put our clients and people first. We have the discipline to consistently deliver KGS Quality, never taking the easy way out. We always look closer and dig deeper. And no matter the project, we care enough to do it right.

As an employee-owned company, we’re invested in our work and our people. Working with us means you’ll be part of some of the most interesting projects up and down the west coast. With the extensive, wide-ranging expertise within our company, you’ll have countless opportunities to learn and grow.

Many of our core clients operate in the hydropower and water management fields. We are growing our U.S. team to continue to provide our industry-leading services to these clients. As we expand our presence on the west coast, we are looking for strong candidates at all levels to join our team!

The Role

As a Senior Electrical Engineer, you will be responsible for providing engineering inputs integral to both small and large scale hydro projects. You will lead and mentor teams, support management of production and coordinate delivery of engineering inputs often with multi-disciplinary project team members and senior stakeholders. You will not only support and help grow the broader engineering team capabilities, but your particular focus will be on continuing the development of our powerhouse and energy capabilities and working with key staff in growing that aspect of the business.

You’ll also be involved in supporting project management duties, liaising with both internal and external clients as well as assisting with guiding and mentoring graduate engineers within the team. In this role you will lead teams conducting technical work for feasibility studies, engineering designs, preparation of construction drawings and specifications, and carrying out onsite visits for rehabilitation and upgrades to dams, hydroelectric facilities and new hydroelectric developments. You will participate in design and play a large role in mentoring the team. You will be working in a collaborative environment with a great team of engineers and scientists, and you will also interface directly with clients.

Key Responsibilities

• Provide input to those managing and executing multiple projects from the proposal stage through to completion. Projects will include a variety of small to large projects.
• Establish and facilitate connections with other departments to support and enhance service delivery.
• Work collaboratively with other disciplines and multidisciplinary project teams to execute project deliverables, as well as ensure that quality objectives, schedules and budgets are met.
• Support and collaborate on new business opportunities with new and existing clients, as well as supporting business development efforts for electrical work.
• Manage and mentor junior staff.
• Design modifications to, or entirely new, electrical, instrumentation and balance of plant systems related to dams, control structures, water retaining structures, switchyards and hydroelectric generating stations.
• Manage and execute multiple projects from the proposal stage through to completion. Projects will include a variety of small to large projects involving water resources, flood control and hydroelectric sectors.
• Design modifications to, or entirely new, electrical, instrumentation, protection, and balance of plant systems related to dams, control structures, water retaining structures, switchyards and hydroelectric generating stations.
• Perform electrical calculations.
• Conduct inspections and support project work on site as required.
• Edit and prepare design specifications.
• Provide detailed designs and coordination of facilities with team members.
• Conduct QA/QC reviews and provide leadership and mentoring related to KGS’s QA/QC process.
• Contribute to the development of the electrical engineering practice at KGS by documenting technical knowledge, improving internal production processes, coordinating and developing internal training content, and other tasks.
• Perform other duties as assigned.

About You

• Minimum of a Bachelor of Science (BS) degree in Electrical Engineering from a recognized university. A post graduate degree would be an asset.
• Minimum of 15 years of experience in electrical engineering with demonstrated project management skills (tracking budgets and meeting schedules).
• Must be registered as a Professional Engineer (P.E.) in California, Oregon, or Washington, as well as eligible for registration as a professional engineer in other states by comity through NCEES.
• Demonstrated leadership of electrical design projects in the industrial power generation field, with experience managing and mentoring younger staff.
• Previous consulting experience is preferred.
• Excellent verbal and written communication skills are required.
• Candidate must be able to work independently with minimal supervision.
• Client interaction: must be able to effectively assume a lead role as project engineer at project meetings and communicate project and technical information.
• Demonstrated experience in site investigations, condition assessments, design and construction support are preferred.
• Experience with station service distribution (all voltages), medium voltage equipment, fixed bus power distribution systems, Programmable Logic Controller (PLC) automation (for equipment control), generators and transformers including related monitoring systems, communication systems, system grounding, hoists and gate automation, and balance of plant systems for hydroelectric stations preferred, but industrial experience will be considered.
• Experience with the following would be considered an asset:
• Backup power systems (including Uninterruptible Power Supply (UPS), Direct Current systems and fuel fired backup)
• Lighting (including emergency and exit lighting systems)
• Fiber and copper structured cable systems, and associated networking equipment
• Distributed Control System (DCS) and PLC Automation, Human Machine Interface (HMI) and Remote Terminal Unit (RTU) integration (including any programming experience)
• Protection systems experience, including specifying, setting and verifying (include reference to voltages)
• Load flow analysis, system modelling, arc-flash, grounding, and other electrical studies (include reference to software used and any training)
• North American Electric Reliability Corporation (NERC)/Critical Infrastructure Protection (CIP) planning
• Physical or cyber security planning or design
• Unit outage planning
• Other renewable energy experience
• Travel to project sites is usually limited but is required depending on project/client requirements.
• Must possess a valid driver’s license and the ability/willingness to undergo security clearance checks.
• Have a drive, attitude, and commitment to being an active participant in our employee-owned culture is a must.

The salary range for this position is $130,000 to $180,000 annually.

Please note that the salary ranges mentioned in this job description should serve simply as a guide. The final compensation offered may vary based on a variety of factors, including candidate’s experience, skills, and location. KGS Group is committed to providing a fair, equitable, and competitive package that reflects the value an individual brings to the organization.

KGS Group is an employee-owned equal opportunity company offering an excellent compensation and benefits package.

KGS Group welcomes and encourages applications from people with disabilities. Upon request, KGS Group will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process.

Title: Technical Project Manager/Senior Principal Engineer – Wireless Charging (MR / MI / Automotive)

We are seeking a senior wireless charging expert to lead system architecture, technical decisions, and project execution for MR (Magnetic Resonance) and MI / Qi (Magnetic Induction) wireless charging across automotive, industrial, and consumer applications. The role requires deep hardware and firmware expertise, system-level thinking, and technical leadership to drive products from concept to mass production.

Key Responsibilities

System Architecture & Leadership

• Lead MR / MI system architecture (Tx/Rx, power, RF, EMC, thermal, firmware)
• Define system-level tradeoffs: efficiency, thermal, EMI, performance, cost, reliability
• Mentor HW/FW teams and review designs
• Serve as chief technical decision-maker on complex system challenges

Wireless Charging Technology

• MR (100 kHz–MHz, long-distance, high-power) and MI (Qi/WPC) for consumer/mobile
• Resonance tuning, Q factor, coupling coefficient, coil design, L/C matching
• Multi-coil, relay/repeater designs; FOD, efficiency, and thermal optimization

Hardware & Power Systems

• Inverter, DC-DC, AC-DC/DC-AC power design
• EMI/EMC mitigation, shielding, ferrite use, thermal design
• PCB schematic/layout review; RF, NFC, and automotive power systems (12V/24V/48V)

Firmware & Embedded Systems

• MCU architecture (ARM Cortex-M), PWM/Timer/ADC control
• Closed-loop control (power, temperature, FOD)
• Qi protocol stack, inverter/DC converter control, OCP/OVP protection
• Firmware architecture, version control, workflow support

Automotive & Compliance

• Automotive-grade system design; CCC Digital Key/NFC integration
• Standards: ISO 7637/11452, CISPR 25, ISO 26262, ISO 21434
• Software/system integration: AUTOSAR, CAN/LIN, UDS, OTA/Bootloader
• IATF 16949, ASPICE, V-Model, ALM practices

Simulation & Tools

• Ansys HFSS/Maxwell, COMSOL, Keysight ADS
• EMC validation, CANoe debugging & system modeling

Qualifications & Requirements

• Bachelor’s or Master’s degree in Electrical Engineering, Mechanical Engineering, or a related field.
• 3-4 years of experience in engineering project management, with a focus on hardware implementation (preferred experience in Aerospace or Automotive industries).
• Strong technical problem-solving skills and a proven track record of addressing complex hardware challenges.
• Ability to thrive in a fast-paced, dynamic environment while managing multiple stakeholders and maintaining excellent customer relations.
• Willingness to travel 25%-30% for on-site installations and collaboration with engineering teams at different locations.
• A hands-on mindset, with demonstrated experience in troubleshooting and hardware implementation, and the willingness to remain actively engaged in hands-on tasks.

This role offers an exciting opportunity to contribute to the evolution of wireless charging technology in both automotive and consumer sectors. Join our innovative team and help drive the future of sustainable charging solutions!

Foxconn Interconnect Technology, Inc. (“FIT”) focuses on the development, manufacturing and marketing of electronic and optoelectronic connectors, antennas, acoustic components, cables and modules for applications in computers, communication equipment, consumer electronics, automobiles, industrial and green energy field products.

We offer our employees competitive compensation and world class benefits. In addition, we recognize the performance of the company, business unit and individual through our incentive and recognition programs. At FIT, base pay is one part of our total compensation package. Individual pay is determined by several factors including but not limited to geography, job related knowledge, skills, experience, and relevant education and/or training. FIT is an equal opportunity employer Minorities/Females/Protected Veterans/Disabled.

About the Company

Our client, a trusted advisor for wireless communications, data, and security, is seeking an experienced Advanced Security Technician in the North Charleston, SC area to support their fast-growing Security division. They are seeking a team member who shares their values: service, growth, teamwork, and safety. They are a military friendly employee. They offer competitive compensation and benefits such as Medical, Dental, Vision, 401K, PTO, Holiday Pay, Education Incentives, and more.

About the Role

• Installing and servicing physical security systems/platforms, including CCTV, access control systems, intrusion detection, communications, and many other low-voltage systems.
• Diagnosing and troubleshooting system issues.
• Training/mentoring others within the team.
• Working as a valued team member on projects/installations to deliver quality results to our customers.
• Maintaining awareness of new and emerging technologies and their potential application on client engagements.
• Working with trades and subcontractors assigned to projects.
• Serving as a lead tech on smaller projects/installations.

Responsibilities

• Installing and servicing physical security systems/platforms, including CCTV, access control systems, intrusion detection, communications, and many other low-voltage systems.
• Diagnosing and troubleshooting system issues.
• Training/mentoring others within the team.
• Working as a valued team member on projects/installations to deliver quality results to our customers.
• Maintaining awareness of new and emerging technologies and their potential application on client engagements.
• Working with trades and subcontractors assigned to projects.
• Serving as a lead tech on smaller projects/installations.

Qualifications

• Minimum 2+ years of experience with the installation and service of enterprise-level physical security systems and platforms (Access Controls, CCTV, Intrusion / Burglar, etc.)

Required Skills

• Proficiency in all device installation, headend equipment, cabling, and ability to connect them to the network.
• Basic understanding of networking and programming.
• Ability to oversee and train others on device installation.
• Demonstrated ability to use test equipment to verify installation.
• Ability to troubleshoot basic issues across various enterprise-level systems.
• Ability to obtain appropriate licensure.
• Strong written and oral communication skills.
• On-call for critical systems maintenance may be required.
• First shift hours Monday – Friday, with occasional 2nd or 3rd shift and weekends depending on project schedules.

Pay range and compensation package

They offer competitive compensation and benefits such as Medical, Dental, Vision, 401K, PTO, Holiday Pay, Education Incentives, and more.

Equal Opportunity Statement

Our client is committed to diversity and inclusivity.

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, but they’re also making history.
 

Northrop Grumman is seeking experienced structure aircraft mechanics to support a maintenance program with Northrop Grumman in Lake Charles, LA.

The Navy E-6 is an airborne command post and communications relay based on the Boeing 707 platform The aircraft are utilized primarily for long-range patrols along the entire U.S. border, and in source and transit zone countries. This platform, now modified to the E-6B standard, conveys instructions from the National Command Authority to fleet ballistic missile submarines, a mission known as TACAMO ("Take Charge And Move Out").

*These positions are Service Contract Act positions.

**These Positions are Contingent upon Funding.

Your duties include, but are not limited to: 

• Maintains repairs and modifies aircraft structures, structural components and engines of complex to extreme difficulty

• Reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components

• Have a broad knowledge of aircraft sheet metal/structural modifications and repair

• Possess detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.

• Possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike

• Be able to read and interpret schematics, assembly drawings, process specifications, wiring diagrams, technical manuals, written instructions, etc.

• Applies professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals.

Job duties may also require that this mechanic:

• Use your thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.

• Adjusts, repairs, or replaces electrical wiring system and aircraft accessories.

• Performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments.

• Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction.

• Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.

• Performs preflight, thru-flight, and post-flight maintenance inspections.

• Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components, and applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation.

• Performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes.

• Use your thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.

• Use your basic knowledge of electrical theory.

• Use a variety of manual hand tools such as crimpers, strippers, wire cutters, heat shrink gun, etc.

• Assemble, modify, and install wire bundles, conductors and other electrical components.

This worker will be required to make entries in aircraft logs and records, and is responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.

Basic Qualifications

• High School Diploma or equivalent (GED) and a minimum 10 years relevant experience.

• Able to perform work in an approved environment during specified work hours.

• Able to change physical locations based upon need (including physical ability to travel).

• Ability to be subject to a variety of physical conditions.

• Able to wear respirator or other safety gear.

• Ability to be subject to areas which could cause various phobias due to height or closed spaces.

Preferred Qualifications

• A&P License.

• E-6B/707 experience.

• Able to obtain/maintain a Secret DoD clearance.

#LCSpring2026

Hazelett Corporation is a global leader in continuous metal casting technology. Our strip‑casting machines integrate mechanical, electrical, thermal, and automation systems to produce materials used in automotive structural components, aluminum foil, lead‑acid batteries, and copper wiring. Our machines are known for their robust design, high productivity, and energy efficiency. We design, manufacture, and assemble our machines in‑house and are committed to fostering the development and long‑term growth of our employees.

POSITION OVERVIEW:

As an Electrical Design Engineer, you will design and develop the electrical systems that power our world‑class industrial machinery. This role blends creative engineering with hands‑on problem‑solving, supporting both our internal manufacturing operations and external customer applications. Projects are diverse and may involve electric motors and drives, control systems, sensor integration, and occasional work with fluid and pneumatic systems.

You’ll collaborate closely with engineers, technicians, and production teams to deliver safe, reliable, and innovative solutions. Candidates with backgrounds in electrical engineering, electrical design, or related technical fields are encouraged to apply. Your title and compensation will align with your experience and technical scope.

WHAT WILL YOU DO:

• Design, develop, and integrate electrical systems for industrial machinery in collaboration with automation engineers.
• Create panel layouts, specify electric motors, and design wire routing.
• Define protection circuitry, load requirements, and related electrical specifications.
• Coordinate with contractors to develop and maintain cable schedules.
• Perform risk assessments and create Functional Design Specifications aligned with industry standards and documentation best practices.
• Specify off‑the‑shelf components and commercial control systems.
• Produce and maintain detailed documentation including schematics, drawings, manuals, and reports.
• Troubleshoot and optimize electromechanical systems in both customer facilities and internal environments.
• Identify opportunities to enhance system performance using emerging technologies.
• Participate in commissioning activities for new installations and upgrades. (Estimated travel: 2–3 weeks per year, typically in one‑week increments.)

WHAT YOU WILL NEED:

• Strong foundation in electrical design for industrial machinery.
• Proficiency with CAD/CAE tools; familiarity with ePlan, DraftSight, SolidWorks, Rockwell Studio 5000, or Siemens TIA is a plus.
• Ability to read, interpret, and modify electrical schematics.
• Experience with PLC programming and system integration.
• Practical, team‑oriented mindset with comfort balancing design tasks and hands‑on work.

EDUCATION

Bachelor’s degree in Electrical Engineering, Electrical Design, or a related field, or an equivalent combination of relevant education and professional experience.

WORK ENVIRONMENT

This role includes a mix of office‑based design work, hands‑on lab activities, and periodic shop‑floor or customer‑site visits. Shop floor work typically involves standard industrial conditions. Hazelett provides all required PPE and prioritizes a safe working environment.

WHAT WE OFFER:

• Hazelett offers 24 plans through its medical coverage and for most of the plans, Hazelett pays 100% of the premiums.
• Hazelett pays 100% of Dental Premiums for one of the best plans in the state.
• Life, AD&D, Short-Term Disability Insurance.
• Matching 401k after 90 days. Fully vested since you start contributing!
• 8 Company Holidays.
• Hybrid work schedule; 4 weeks of paid time off.
• On-site Athletic Trainer.
• Free uniforms with cleaning.
• Free use of our company beach on Malletts Bay and boat mooring at a discounted price.
• Opportunities for growth and skill development.

The base pay range for this full-time position is $72,000 - $97,000. Your base pay will depend on your skills, qualifications, experience, and location. In addition, our ranges are determined by role, level, and location.

Hazelett is passionately committed to creating a diverse, equitable, and inclusive work culture. Join us in building a community where differences are our strength, and where everyone has an equal chance to thrive.