Cable Remote Codes Jobs in Usa

Position summary:

Install, maintain, and repair electrical systems, apparatus, and electrical equipment, wiring and fixtures, and electronic components of industrial machinery and equipment following electrical code, manuals, schematic diagrams, blueprints, and other specifications, using hand tools, power tools, and electrical and electronic test equipment.

Tasks:

• Install power supply wiring and conduit for newly installed machines and equipment following electrical code and blueprints, using hand tools and voltage tester.
• Install ground leads and connect power cables and wires to machines and equipment, following manuals, schematic diagrams, blueprints, using hand tools and test equipment.
• Diagnoses malfunctioning apparatus, such as transformers, motors, and fixtures using test equipment.
• Repair or replace faulty electric components, wiring, equipment, and fixtures, using hand tools and power tools.
• Test malfunctioning or broken equipment using test equipment, and discuss malfunction with other workers to diagnose malfunction.
• Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
• Place conduit, pipes or tubing, inside designated partitions, walls, structures or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
• Connect wires to circuit breakers, transformers, or other components.
• Install ground leads and connect power cables to equipment, such as motors.

Skills:

• Installation - Installing equipment, machines, wiring, or programs to meet specifications.
• Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
• Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
• Troubleshooting - Determining causes of operating errors and deciding what to do about it.
• Equipment Selection - Determining the kind of tools and equipment needed to do a job.
• Repairing - Repairing machines or systems using the needed tools.

Attributes:

• Follow the rules of safe conduct at all times.
• Demonstrate ability to effectively utilize materials/resources in cost-effective manner.
• Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
• Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
• Oral Comprehension - The ability to listen to and understand information and ideas presented through spoken words and sentences.
• Information Ordering - The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
• Arm-Hand Steadiness - The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
• Manual Dexterity - The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.

Knowledge Requirements:

• Post-Secondary Certificate desirable- awarded for training completed after high school. Minimum 5 years in craft, including helper and apprentice roles. Minimum 2 years as journeyman working in industrial environment
• READING: The employee must have the ability to read safety requirements, instructions in the correct use and maintenance of shop tools, be able to read and understand methods and procedures that are present on drawings, layout work, and just specifications.
• WRITING: Must have the ability to write simple reports with the correct format using spelling and grammar. (English
• SPEAKING: Must have the ability to speak using correct English with a well modulated voice.
• The minimum math ability usually associated with this classification is the ability to calculate surface areas, translate these figures into a bill of material which can be used to complete a specific job. Employees must be able to use variable and formulas which are normally found in most industry approved trade hand books. Also, employees must be familiar with the O.S.H.A. requirements for the type work that is being performed.

The employee must understand that the reporting system used for problems and information is as follows: 1) Crewleader, 2) Foreman, 3) General Foreman, and 4) Superintendent.

Physical Requirements:

• Positions require working in: climbing, bending, sitting, walking, kneeling, crawling, standing, lifting, pushing, and pulling.
• Good hand eye balance and the ability to distinguish colors are required in order to use the tools that are necessary to perform the required work.
• Employees must have vision which has good depth perception in order to judge distance and space relationships.
• The employee must be able to work in all types of weather conditions.
• The ability to work in elevated positions is a must.
• The employee must be able to work in confined spaces as well as wear the following safety equipment when need be: life vests, ear protection, rubber gloves, leather gloves, hard hat, slicker suit, acid suit, rubber gloves, full face breathing mask, wearing full safety harness, or wearing a face shield.
• The heavy work will require the employee to exert up to 100 pounds of force occasionally: The medium work will require the exerting of 50 pounds of frequently: The remainder of the work should require the exertion of 20 pounds of force to constantly move an object.

Other Requirements:

The employee must have a telephone. The employee is expected to work overtime in order to maintain the plant in a safe and productive state. The employee is expected to make call outs when such work is available and the employee’s services are needed.

The employee must have a valid Texas Driver’s License and have permission prior to operating any TIG vehicle. The requirements for operating a company vehicle are as follows: In the past three (3) years the employee can have had only 4 moving violations, no more than 2 chargeable accidents, and no D.W.I.

NOTICE: THIS JOB DESCRIPTION IN NO WAY STATES OR IMPLIES THAT THESE ARE THE ONLY DUTIES TO BE PREFORMED BY THIS EMPLOYEE. HE OR SHE WILL BE REQUIRED TO FOLLOW ANY OTHER INSTRUCTIONS AND TO PERFORM ANY OTHER DUTIES REQUESTED BY HIS OR HER SUPERVISOR.

Job Type: Full-time

Job Summary

Under the direction of the Vice President - Marketing, the Market Development Manager for Industrial Automation will lead strategic initiatives to expand HellermannTyton's presence in factory automation markets. This role focuses on identifying growth opportunities, developing go-to-market strategies, and driving the adoption of innovative cable management solutions for automated manufacturing environments. The position works independently and collaborates with multiple departments, including Sales, Marketing, Engineering, and Operations.

Essential Functions:

Market Strategy & Development

• 
  
  
• Define and execute industrial automation strategies, with emphasis on factory automation and cable management solutions.
  
  
• Conduct market assessments, identify high-growth segments, and develop actionable plans.
  
  
• Collaborate with Sales, Product Management, Engineering, and Marketing Communications to align strategies and resources.
  
  
• Partner with key commercial stakeholders to determine customer needs and lead the development of new products and marketing deliverables required to expand the company's market position.
  
  

Business Growth & Partnerships

• 
  
  
• Build relationships with OEMs, system integrators, and channel partners in the automation sectors.
  
  
• Develop strategic partnerships to penetrate new markets and expand share in existing ones.
  
  
• Participate in industry-related committees as applicable. Interpret code and industry changes and ensure HellermannTyton has the right specifications and products to enable new business.
  
  

Product Development Support

• 
  
  
• Work closely with Product Category Managers, Concept Team, and Engineering to set design, compliance, and performance specifications for new product developments in assigned markets.
  
  
• Provide market intelligence to guide product roadmap and ensure alignment with customer needs.
  
  

Sales Enablement & Execution

• 
  
  
• Support Key Account Managers and channel teams with technical expertise and market insights.
  
  
• Key contributor of new product launches, marketing deliverables, and deployment to the internal and external sales teams, channel, and key influencers in the market. Work closely with the marketing communications team to ensure deliverables further the company's brand equity and are created for maximum impact and results.
  
  
• Drive execution of cable management initiatives and other differentiated solutions for automation environments.
  
  

Performance Monitoring

• 
  
  
• Establish KPIs, track progress, and report quarterly on market penetration and revenue growth.
  
  
• Adjust strategies based on performance metrics and evolving market dynamics.
  
  
• Monitor and evaluate the competitive landscape in North America and globally. Develop deliverables and products to further differentiate HellermannTyton in the market.
  
  

Success in this role will require:

• 
  
  
• Ability to quickly and competently develop solutions-based differentiation models utilizing product, capability, corporate value, and market relationships.
  
  
• Ability to assess market needs and competition and develop a strategy that positions us as the market leader.
  
  
• History of creativity, innovation, inquisitiveness, and ethical behavior.
  
  
• Synthesize complex or diverse information. Collect and research data. Use intuition and experience to complement data.
  
  
• Proven experience in developing and executing business cases. Make sound decisions in new product and program development for profitable growth.
  
  
• Excellent skills in project organization, tracking, and communication of progress.
  
  

What You'll Bring

• 
  
  
• Bachelor's degree from a 4-year accredited college or university.
  
  
• 5+ years' experience in an industrial automation environment operating in a senior product management or market development role with a manufacturer.
  
  
• Strong project management, interpersonal, leadership, organizational and written/verbal communication skills required; ability to sell ideas and present strategies at an executive level.
  
  
• Excellent verbal and written skills. Proven ability to communicate value to different customer influencers - from the specifier to executive management
  
  
• Ability to travel up to 40% of the time.
  
  
• Must have a valid driver's license, with an acceptable driving record, along with adequate insurance
  
  

#LI-MS1 #LI-Hybrid

Overview
Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.

About Georgia Tech
Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values
Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:
1. Students are our top priority.
2. We strive for excellence.
3. We thrive on diversity.
4. We celebrate collaboration.
5. We champion innovation.
6. We safeguard freedom of inquiry and expression.
7. We nurture the wellbeing of our community.
8. We act ethically.
9. We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

The Electrical Integrator L2 will provide technical support to program managers, project directors, task leads, and senior-level Electrical Integrators. The Electrical Integrator L2 will help with mid-level troubleshooting, repair, and maintenance of electrical cables, circuits, and assemblies.

This position will interact on a consistent basis with: faculty and staff project/task leaders, technical leads, contractors, and vendors

This position typically will advise and counsel: faculty and staff project/task leaders, technical leads, contractors, and vendors

This position will supervise: N/A

Job Duty 1 -
Support program managers, project directors, and task leads with mid-level electrical assembly work such as cable assembly fabrication, and electrical chassis fabrication and assembly

Job Duty 2 -
Help with mid-level testing and troubleshooting of circuits and systems

Job Duty 3 -
Provide intermediate levels of maintenance and repair of printed circuit boards and printed circuit board assemblies

Job Duty 4 -
Assist with kitting parts using a Bill of Materials or other online inventory tools; help provide data entry for online inventory tools

Job Duty 5 -
Support other work teams, as needed, with skills such as mechanical assembly, welding, metal work, drafting, parts inventory, and technical documentation

Job Duty 6 -
Provide guidance to more junior-level technicians

Job Duty 7 -
Perform other job-related duties as assigned

Educational Requirements
Technical Diploma, Associate's Degree, or two years college course work, or an equivalent combination of education and experience

Required Experience
Two to five years of job-related experience

Preferred Experience
IPC-610
IPC-620
J-STD-001
IPC-7711
IPC-7721

ABILITIES
Experience using crimping tools preferred

KNOWLEDGE
Familiarity with hand tools and a basic understanding of AC/DC circuits; a basic understanding of RF cables and build processes preferred

SKILLS
Basic skills in PCB assembly, electrical assembly wiring, and soldering preferred

The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The University is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and University policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of race, ethnicity, ancestry, color, religion, sex (including pregnancy), sexual orientation, gender identity, gender expression, national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. This prohibition applies to faculty, staff, students, and all other members of the Georgia Tech community, including affiliates, invitees, and guests. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

More information on these policies can be found here: policymanual/section6/c2714 Board of Regents Policy Manual | University System of Georgia ( ).

This is not a supervisory position.
This position does not have any financial responsibilities.
This position will not be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel.
This position does require the ability to obtain and maintain a security clearance.
This position is located in Atlanta, GA
Salary Job Grade A11
Recruiting Range: $ $23.99 to $32.62 based on experience

Successful candidate must be able to pass a background check. Please visit employment/pre-employment-screening.

A Senior Test Engineer job in Miramar, FL 33027 is currently available through Belcan at one of our key aerospace clients. This is a four‑month contract role with the potential to convert to a direct hire. To be considered for this role the candidate will need to have 3-5 years of relevant experience.

Description

The Test Design Engineer is responsible for creating and performing test automation activities consistent with the test lead and test development goals/objectives. This role requires knowledge/experience with automated test software, manufacturing test environment and the ability to interpret test requirements, implement requirement-based test methodologies and trouble shoot & debug test and product issues. Experience with FAA Part 145 in an MRO environment highly desired.

Job Duties:

Specific duties will include:

SW/HW debug, troubleshoot, upgrade and maintain product automated test equipment.

Requirements Analysis/Review for test-ability

Test procedure development, implementation, execution and failure root cause analysis.

Test planning and preparation.

Assess System performance against requirements

Develop code in Veristand, Teststand, LabVIEW to implement test GUIs, drivers and test requirements.

Perform verification and validation testing on developed Automated Test Equipment (ATE).

Perform sub-system testing from bench level CCA functional testing to system level burn in testing against an ATP/QTP.

Develop and refine system and board level test cases and procedures.

Trouble shoot subsystem and system level failures to root cause.

Design test fixtures & cables to enable testing.

Perform verification and validation testing on developed Automated Test Equipment (ATE).

Bench test CCAs and test electronic sub-assemblies and rack based test systems (instruments, cables and interfaces).

Trouble shoot subsystem and system level failures to root cause.

Gather, configure and use appropriate test equipment to perform task - Power supplies, DVM, Oscilloscope, electronic loads, custom cables, etc.

Interpret test requirements and electrical test results.

Read electrical schematics.

Test planning, preparation & execution

Required Qualifications:

3 to 5 years of experience

Strong interpersonal skills

Strong analytical skills

B.S. or M.S. in Electrical Engineering, Electrical Engineering Technology, or related discipline desired

Will consider equivalent years of relevant experience in lieu of a formal degree

Experience working with or developing Automated Test Equipment (ATE).

Experience in hardware and test equipment troubleshooting experience.

Knowledge of test automation (HIL) using National Instruments Labview, TestStand and Veristand

Can operate independently

Desired Skills:

Excellent verbal and written communication skills.

Experience working independently and in a collaborative environment

Ability to react to project adjustments and alterations promptly and efficiently

Ability to effectively prioritize and execute tasks in a high-pressure environment

Familiarity with electronic components and common electronic test equipment.

Experienced using lab test equipment, power supplies, DVM, Oscilloscope, electronic loads

Ability to interpret test requirements and electrical test results.

Ability to conduct detailed failure analysis and develop and implement root cause corrective actions.

Experience with GIT, Tortoise SVN, or equivalent software configuration management tools

Previous experience with CAN, UDS, RS232, RS422 & 1553 communication protocols.

Previous experience with programming languages such as C, C++ & C#.

Previous experience with Visual Studio.

Compensation:

This position is offering an salary rate of $52.88 - $62.50/hr, however, Belcan considers several factors when extending an offer, including but not limited to education, experience, geographic location, and discipline. Benefits offered may include health care, dental, vision, life insurance; 401(k); education assistance; paid time off including PTO, holidays, and any other paid leave required by law.

Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

Is this you?

• You are driven to use your knowledge, skills, and work ethic to make a difference, saving both lives and property
• You have a passion for delivering top-notch customer service
• You thrive in a fast-paced work environment, always up for learning something new

If yes, then bring your talent and skills to F.E. Moran Fire Protection!

We have an exciting opportunity in Columbus, OH for an experienced Fire Alarm Technician.As our company continues to expand, we want you to grow and develop with us!

You Are:

• KNOWLEDGEABLE: High school diploma or equivalent; previous Fire Alarm Technician, Security Technician or other electronic systems experience; Understanding of NFPA standards, International Building and Fire Codes, Accessibility Codes, and state and locally adopted life safety codes
• TECHNICAL: Proficient in the application of Basic Electronic Theory and in the use of a digital multimeter; Ability to read and understand blueprints, schematics, and datasheets; Experience in troubleshooting, repair, and maintenance of fire alarm and other electronic systems preferred; Intermediate MS Office and Excel skills
• A SELF-STARTER: Learn quickly and use your resources to be successful in your role
• ANALYTICAL: Ability to read and understand technical information, analyze, think critically, and problem-solve
• FLEXIBLE: Travel to client sites regularly; Apply technical skills across multiple system types and disciplines, including fire alarm, intrusion, CCTV, access control, and structured cabling

What You’ll Do:

• SERVICE & INSTALL: Assemble control panels and build system programs; Install low voltage cabling and electronic system components; Troubleshoot systems to the component level to identify equipment necessary for repairs; Inspect and test fire alarm and other electronic systems
• KEEP TO CODE: Ensure that projects are compliant with local, state, federal, and district codes, regulations, and specifications; Complete required documentation accurately and in a timely fashion
• PUT SAFETY FIRST: Adhere to OSHA, customer, and safety protocols while on site; utilize safety best practices when lifting, moving, or pushing heavy materials and while climbing, balancing, and maneuvering on the job site
• COMMUNICATE: Provide thorough and timely information to clients; Communicate status of work orders to supervisors and other office staff
• COLLABORATE: Coordinate with project Foreman and other trades to complete projects and work orders efficiently; Maintain positive working relationships with field and office staff

What We Offer:

• TOTAL REWARDS: Competitive salary and benefits package, including medical, dental, and vision; life and disability insurance; paid time off; and 401(k) retirement savings plan with discretionary company match
• DEVELOPMENT: Opportunities to learn, develop, and enhance your skills and abilities
• WORK ENVIRONMENT: Professional, engaging, supportive, and rewarding
• TEAM: Play an integral role in a knowledgeable and high achieving group of professionals

Who We Are:

The F.E. Moran Group of Companies is comprised of seven specialized businesses offering a full spectrum of HVAC, Mechanical Services, Fire Protection, Special Hazard Systems, Plumbing, Refrigeration, and Industrial Piping Services across virtually every market. We are a single-source contractor working seamlessly to consolidate resources and deliver outstanding construction and service solutions, regardless of size, scope, complexity, or location…We save lives, protect property, and create healthy environments.

Interested? Apply Now!

Candidates must be at least 21 years of age to be eligible for positions that require participation in the company’s fleet program. This is a requirement for roles involving the operation of company vehicles.

At F.E. Moran Group of Companies, we are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. If you have a specific need that requires accommodation, please advise a member of the Talent Acquisition team by contacting us at

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Crane Maintenance Mechanic, to join our team in Seattle, SeaTac, Renton, Tukwila, Kent, Auburn and Puyallup, Washington.

As a crane maintenance mechanic, you will ensure the safety and efficient operation of our cranes, essential equipment for our manufacturing processes.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities

• Inspect, maintain, repair, rebuild, retrofit, modify, assemble, disassemble, troubleshoot, analyze, diagnose, calibrate, adjust, and test mechanical systems and or subsystems of all types of cranes such as, but not limited to cab operated, radio controlled, jib type, pendant operated, etc. Know, understand, and work in compliance with SHEA and other applicable codes and regulations for overhead cranes

• Coordinate and work with management, engineering, equipment vendors, and other organizations to analyze equipment design requirements and capabilities.
• Use schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances.

• Determine and/or develop methods where procedures may not be available.
• Devise and make shop aids to facilitate work. Operate and utilize mechanical, test equipment and test systems, precision devices in failure analysis, all forms of predictive/preventative technologies, as required on cranes.
• Operate, use and maintain overhead maintenance work platforms
• Maintain, adjust, install and repair, hydraulic, pneumatic and electric brake system components on cranes and bridges as requires.
• Inspect and maintain building runway rails and expansion joints.
• Maintain mechanical crane and hoist systems including cables, chain, sheaves and hooks.
• Perform the operational tests and load tests of cranes and bridges as required by Engineering, SHEA and other applicable codes and regulations.
• Maintain logs, charts, and perform written and verbal tie-in records.
• Prepare reports and schedules as required.
• Work with and assist employees of other classifications as required.
• Perform work in other classifications when incidental but necessary to the accomplishment of the assignment.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 2+ Years experience using schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances

• 2+Years experience maintaining mechanical cranes and hoists systems including cables, chain sheaves and hooks.

• This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.
• Able to lift up to 35 pounds.

Preferred Qualifications:

• Experience inspecting and maintaining building runway rails and expansion joints.
• Preference given to those with 2 years overhead crane experience.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: 33.32 – 61.01

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Title: SDET / QA Automation Engineer

Location: Mount Laurel- NJ

Duration: Long Term

Job Description:

Job Summary:

We are seeking a highly skilled and experienced SDET / QA Automation Engineer with 8 to 10 years of expertise in Python, JavaScript, and modern automation frameworks. This position involves developing automation solutions, microservices, and test scripts while validating end‑to‑end network components and their behavior. The candidate should have strong domain knowledge in networking and cable technologies, with the ability to collaborate effectively with clients and cross‑functional teams.

Key Responsibilities:

• Develop microservices using Python, NodeJS, and Golang as part of automation and service validations.
• Develop standalone Python/NodeJS scripts to simulate network traffic and validate performance across different endpoints.
• Create Proof of Concepts (POCs) based on client needs and actively participate in client demos and technical discussions.
• Lead the creation of test strategies and manage test environments with both physical and virtual device setups.
• Create comprehensive test scenarios and automated test scripts using MochaJS, ensuring robust coverage of functional, integration, and regression test cases.
• Design reusable test components, validate API and microservice behavior, and integrate MochaJS test suites into the existing automation framework to enhance reliability and execution efficiency.
• Collaborate with cross‑functional teams to refine requirements, improve test coverage, and ensure smooth integration with CI/CD pipelines.
• Gather requirements and perform detailed analysis for new automation scenarios and test case development.
• Support manual and automation testing across applications, devices, and servers as required.
• Ensure code quality using tools like SonarQube and adhere to strict QA standards.
• Provide technical guidance, troubleshooting support, and mentorship to team members on tasks and issues raised by the client.
• Maintain version control and branching strategies using GitHub, ensuring high code integrity and traceability.
• Monitor automation execution, analyze failures, and drive root‑cause investigations to improve overall product quality.
• Document technical workflows, automation processes, and test scenarios to ensure long-term maintainability and knowledge sharing.

Required Skills & Experience:

• 8-10 years of experience in QA/SDET automation roles.
• Strong programming knowledge with Python and JavaScript.
• Good hands-on experience with Go Lang and NodeJS.
• Hands-on experience with MochaJS for scripting and automated testing.
• Excellent knowledge with web technologies like REST, SOAP, XML and JSON
• Proficiency in API testing using Bruno/ Postman.
• Familiarity with GitHub for version control and Jira for project tracking.
• Excellent domain knowledge in Network and cable domain
• Should be familiar with IMS architecture and SIP protocols.
• Good problem-solving and debugging skills.

Should have good communication and client interaction skills.