Bojangles Coliseum Seating Chart Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.  

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Press Operator, Hydraulic & Mechanical A, to join our Fabrication team in Algona, Auburn, and Everett Washington.

As a Press Operator Hydraulic & Mechanical A, you will be a vital part of our manufacturing team, responsible for setting up and operating hydraulic and mechanical presses to shape and form various materials. Your role will involve obtaining work packages, performing safety checks, and ensuring that all equipment is properly set up and maintained. You will utilize your technical skills to troubleshoot issues, verify material quality, and collaborate with team members to optimize production processes. Your attention to detail and commitment to excellence will directly contribute to our operational success.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain work package from the ready-to-work rack, work board, or assigned by Team Lead, or run previously set-up jobs by reviewing tie-ins from prior operators.

• Operate a computer to access information from prints, sketches, drawings, layout documents, and Boeing (BAC) specifications.

• Perform safety checks on machines, ensuring the area is clear of obstacles, power switches are off, and safety guards are installed.

• Move heavy materials, equipment, tools, and dies to the work area using stackers, Kalamar, die loaders, or overhead cranes, asking for assistance as needed.

• Check steam lines for cracks or cuts and verify o-rings are properly seated prior to hookup.

• Preheat dies and punches using electricity or steam, and verify temperature accuracy for hot dies with a temperature stick or pyrometer.

• Determine machine setup by reviewing work orders, tooling usage instructions, and die setup charts, making adjustments as required.

• Load and secure dies into the press, checking for defects and torquing as necessary.

• Examine tools, dies, and fixtures for damage, separating them using appropriate handling procedures.

• Set up press cycle programs using control panels or manual switches to adjust height, stroke, pressure, and cycle time.

• Develop patterns when necessary, cutting and tailoring materials like fiberglass and graphite to die requirements.

• Perform pull-outs on various types of metal and alloy tubes using a hydraulic tube pull-out machine.

• Verify that materials are free from burrs and debris, using hand deburring tools and denatured alcohol prior to forming operations.

• Consult with Team Lead and other personnel (e.g., engineering, planning, inspection) on process or job-related issues as required.

• Maintain a written tie-in book or electronic communication to coordinate with other shifts and dispose of hazardous materials in an approved manner.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 120.62 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 1+ Years of experience setting and using precision measuring tools; equipment such as micrometers, calipers, and/or dial indicators?

• 1+ Years of experience reading blueprints and structural drawings.

• 1+ Years of experience operating a hydraulic press.

• Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.

Preferred Qualifications:

• Must be able to stand, twist, bend, kneel and occasional crawling within an 8 hour shift.

• Ability to work in noisy environments while completing tasks.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 31, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Position Summary

The Office Manager ensures seamless daily operations of the workplace environment, overseeing reception, facilities coordination, vendor management, travel, and executive-level operational support. This role serves as a trusted operational partner to the Sr. Director of Executive Operations and leadership team, ensuring a professional, organized, and efficient office experience. The Office Manager collaborates cross-functionally with all departments, and department leaders to drive operational excellence across workplace services and corporate support functions.

Key Responsibilities

Front Desk & Visitor Management

• Answer and direct incoming phone calls
• Greet visitors and manage front desk reception area
• Issue and track visitor and employee temporary badges
• Address customer service inquiries and coordinate resolution with appropriate departments

Mail & Shipping Operations

• Sort and distribute all incoming mail and packages
• Process outgoing mail and shipments
• Maintain mailroom organization as well as USPS and UPS supply inventory

Conference Room & Meeting Support

• Manage conference room scheduling and readiness
• Ensure conference rooms are clean, organized, and properly configured
• Partner with IT to resolve conference room and ELT technology issues
• Coordinate meeting support for ELT and leadership sessions as needed

Office Operations & Facilities Coordination

• Maintain office, lobby, breakroom, and common areas
• Order and manage office, breakroom, and janitorial supplies
• Coordinate cleaning services and address vendor issues (e.g., Jani-King)
• Work with facilities team to resolve office and building concerns
• Maintain office seating and organizational charts
• Create and update cubicle and office name tags

Vendor & Equipment Management

• Serve as primary liaison for office vendors and contractors
• Manage and maintain office equipment; partner with IT as needed
• Track service requests and ensure timely follow-through and resolution

Administrative Support & Special Functions

• Coordinate Outfitter travel logistics as assigned

Qualifications

• 3+ years of experience in office administration, reception, or office management
• Travel coordination experience with platforms, such as Navan or Concur
• Strong organizational and multitasking skills
• Professional communication skills (verbal and written)
• Experience coordinating vendors and service providers preferred
• Proficiency in Microsoft Office or comparable systems
• Ability to manage multiple priorities in a fast-paced environment

Core Competencies

• Service-oriented mindset
• Strong attention to detail
• Problem-solving and follow-through
• Professional discretion and confidentiality
• Ability to collaborate cross-functionally (IT, Facilities, Leadership, Departments)

Executive & Corporate Operations Support

• Manage corporate travel agreements and vendor relationships (Navan, Engine, National/Enterprise, Airline Partners)
• Schedule and coordinate Store Support Center and Leadership meetings
• Partner with Real Estate to coordinate document execution by CFO; manage overnight shipments as needed and ensure fully executed documents are received and properly filed in designated real estate folders
• Distribute monthly employee birthday and anniversary lists to Department Managers

Sportsman's Warehouse is an Equal Opportunity Employer

Dental Assistant

O'Fallon IL

Introduction

Join our dynamic dental team as a Dental Assistant,with La Cross Dental , in our O'Fallon IL location. Where you'll play a crucial role in providing exceptional patient care. In this rewarding position, you'll support our dentists in delivering top-notch dental services, ensuring a comfortable and efficient experience for every patient. Your contributions will help maintain a smooth workflow and a positive environment in our practice.

We offer competitive compensation, benefits packages with PTO, paid holidays, emplyer-paid life insurance, and 401K with 6% employer matching.

Job Responsibilities

-Welcoming & Seating Patients
-Chair-side dental assisting and proper charting of treatment
-Taking blood pressure and administering nitrous
-Tray preparation for all procedures, and room turnover between procedures
-Taking x-rays (PAs, Pano, FMX)
-Taking alginates, pouring and trimming models, and making custom trays and retainers
-Sterilizing hand pieces and instruments
-Communicating home-care instructions after procedures and surgeries; walking the patient to the front desk
-Accurately communicating treatment and any necessary follow-up appointments or instructions to the front desk staff
-General office maintenance and organization as needed

Job Requirements

-Dental experience REQUIRED Expanded Functions experience or EF Certification is a bonus!
-Eaglesoft, CareStack, or similar practice management software Experience
-Time management skills: spend your time efficiently while maintaining high quality work and high standards of patient care
-Organized, collaborative, desire to be part of a team working towards common goals

La Cross Core Values

Integrity Do the right thing, even when it is hard.

Honesty Keep your promises. Commitment is an action.

Engagement Be present for one another and our patients.

Respect Treat people how THEY want to be treated.

Fun Enjoy your experience!

Compensation details: 20-25 Hourly Wage

PI719331de4c15-26289-39895226

We manufacture and market Splenda, the #1 brand in the low calorie sweetener category and the most recognized in the world. Heartland Food Products Group is a global leader in the consumer packaged goods (CPG) industry, producing low-calorie sweeteners, coffee, coffee creamers and liquid water enhancers.

We make coffee, tea and water taste better and help people live happier, healthier and longer lives by making it easy to reduce sugar.

We offer an excellent compensation and benefits package. Come grow with us!

This role is not a remote opportunity, it is on-site at our Manufacturing Plant in Indianapolis, Indiana. 3rd shift available in our Dry Sweeteners department.

Scope:

The Production Supervisor directly supervises and coordinates the activities of production and operating workers, such as packers, machine operators, and blenders. The Supervisor will be responsible for establishing and achieving production goals, fostering relationships, promoting Health and Safety and the development of a well-trained and motivated staff.

Essential Duties and Key Responsibilities:

• Enforces safety and sanitation regulations per food safety and quality guidelines.
• Responsible for initiating appropriate actions that address Food Safety concerns, including escalation to Quality and Management.
• Utilizes all food safety and food security guidelines, including Safe Quality Foods (SQF) good manufacturing practices and Hazard Analysis Critical Control Points.
• Directs and coordinates the activities of the employees engaged in the production or processing of goods, such as packers, machine operators, and blenders.
• Develops and motivates team to solve own day-to-day operational issues and achieve plant goals through ongoing communication and facilitation of team meetings.
• Coordinates daily inventories and supplies and other operational activities within or between departments.
• Plans and establishes work schedules, assignments, and production sequences to meet production goals.
• Inspects materials, products, or equipment to detect defects or malfunctions.
• Observes work and monitor gauges, dials, or other indicators to ensure that operators conform to production or processing standards.
• Conducts employee training in equipment operations and work and safety procedures or assigns employee training to experienced workers.
• Maintains records of employees’ attendance and hours worked.
• Counsels employees about work-related issues and assists employees to correct job-skill deficiencies.
• Recommends or initiates personnel actions, such as hires, promotions, transfers, discharges, or disciplinary measures of direct reports.
• Interprets specifications, blueprints, job orders, and company policies and procedures for workers.
• Initiates and drives process improvements.
• Reads and analyzes charts, work orders, production schedules, and other records and reports to determine production requirements and evaluates current production estimates and outputs.
• Document all records outlined by company policies, such as production records, HACCP, good manufacturing policies, standard operating procedures, and food safety and quality plans.
• Oversees and completes production documentation, support documentation, and process control documentation throughout the facility.
• All other duties as assigned.

Qualifications

• Bachelor of Science in Engineering required.
• Minimum of 2 years’ experience in manufacturing and supervision.
• Superior analytical and critical thinking skills
• Proficient computer skills, including Microsoft Excel and Word
• Demonstrates essential problem-solving methods and initiative.
• Ability to perform under pressure and to solve problems independently
• Ability to communicate well with all employees and customers

Physical Demands:

• Must be able to physically perform the functions of climbing, balancing, stooping, kneeling, crouching, reaching, standing, walking, pushing, pulling, lifting, grasping, feeling, talking, hearing, and repetitive motions
• Must be able to work seated using a computer and phone for long periods of time.
• Must be able to work extended hours, such as daily overtime and an occasional weekend
• Must possess visual acuity to document company records
• Continuous walking throughout plant and distribution center.
• Lifting up to 50 pounds

Heartland Food Products Group is a global leader in the consumer-packaged goods (CPG) industry, producing low-calorie sweeteners, coffee, coffee creamers and liquid water enhancers. We manufacture and market Splenda, the #1 brand in the low calorie sweetener category and the most recognized in the world.

Our goal is to transform the sweetener category from commoditized ingredients to a destination that unleashed shopper’s potential for better, healthier baking and beverages. We make coffee, tea and water taste better and help people live happier, healthier and longer lives by making it easy to reduce sugar.

We offer an excellent compensation and benefits package. Come grow with us!

This role is not a remote opportunity, it is on-site at our Manufacturing Plant in Indianapolis, Indiana.

Scope:

The Technician, Research and Development provides support for LWE, Sweetener, Coffee, Tea and Concentrate projects; and Shelf Life program; compounds formulas accurately, take physical analytical measurements and prepares and executes daily sensory panels and/or shelf life evaluations in accordance with written or oral instructions; maintains controls for the plant and R&D group, assists with data management, analysis and reporting; maintains inventory of samples for sensory and shelf life studies and may support other product development initiatives as requested. The duties in this position are expected to evolve over time as a result of the company’s growth and expansion into new technologies.

Essential Duties and Key Responsibilities:

• Follows detailed instructions and works independently with light supervision.

• Collects, manages and maintains sensory or shelf life inventory. Includes sample receipt, labeling, placement in appropriate environment, removal at defined intervals for stability testing and archiving/disposal of samples at end of study.

• Monitors stability chambers and chart recorders to confirm environmental conditions are maintained within established specifications; maintains physical and electronic shelf life testing files and database following established procedures.

• Executes daily sensory panels including set-up, entering electronic ballots, serving samples, monitoring panelists and clean-up.

• Compounds formulations accurately and routinely.

• Maintains ingredients in the lab to quickly and easily compound formulas.

• Maintains approved controls for the R&D group and for the plant

• Maintains the flavor library of LWE concentrates for the R&D group.

• Conducts routine chemical, physical, nutrient or stability analyses of samples following established protocols.

• Maintains physical and electronic analysis files and databases; applies statistical principles and assists in preparing reports communicating test results; reports atypical results or deviations to supervisor and initiates investigation and retesting if appropriate.

• Prepares and submits samples for outside testing, monitors progress and records results in database.

• Develops reviews and updates relevant SOP’s.

• Responsible for food safety and food quality of samples handled by:

o Following GMP’s, maintaining sanitary conditions, adhering to safe work practices and ensuring that product quality is maintained.

o Reporting any conditions or practices that may adversely impact food safety, food quality or personal safety to supervisor.

• Maintains consistent attendance; must have flexibility to work extended hours or off shifts if required.

Qualifications:

• Bachelor’s degree in Food Science preferred, Nutrition, Chemistry, Biology or related field acceptable on a case by case basis.

• Minimum of 3 years of laboratory experience with ability to calibrate and operate standard food lab equipment required or lab experience during undergraduate studies.

• Excellent mathematical skills and knowledge of, or ability to learn, statistical analysis required.

• Computer literacy including competency with Microsoft Office and demonstrated ability to operate complex software programs required.

• Excellent organizational and communication skills, proficiency in speaking, comprehending, reading and writing English required.

Physical Demands:

• Must be able to physically perform the functions of climbing, balancing, stooping, kneeling, crouching, reaching, standing, walking, pushing, pulling, lifting, grasping, feeling, talking, hearing, and repetitive motions

• Must be able to work seated using a computer and phone for long periods of time.

• Must be able to work extended hours, such as daily overtime and an occasional weekend

• Must possess visual acuity to document company records

• Continuous walking throughout plant and distribution center.

• Lifting up to 40 pounds

• Support our divisions - when they grow, we grow
• Positively impact the lives of over 1,000,000+ people each year with our innovative and entrepreneurial mindset
• Create an environment where all employees can do their best work

• Everybody matters
• Do the right thing
• We are in this together
• Passion for our customers

• Review for accuracy/necessary approvals and import timecards into the payroll system
• Process special payrolls including bonus runs, interim payrolls, and year-end payroll adjustments
• Process all year-end tax reports, W-2's, etc.
• Perform manual update of vacation accruals for union employees
• Research and resolve questions as they relate to the processing of payroll information
• Own payroll data governance to ensure accuracy of payroll data

• Analyze payroll accruals

• Verify federal, state, and local tax reports
• Register in new states as needed
• Verify and remit monthly, quarterly, and annual payroll tax reports
• Prepare Worker's Compensation annual report
• Prepare Profit Sharing annual report
• Maintain I-9s, compliance paperwork, employment verification
• Prepare information for annual 401(k) as needed

• Create and maintain 18-month rolling forecast related to compensation and benefits
• Support Corporate and Divisional controllers with payroll cost reporting and analysis
• Assist with ad-hoc reporting, analysis, and modeling

• Works with a sense of urgency and aligned purpose
• Has a passion for our customers and a focus on end consumers
• Is a servant leader who is collaborative and approachable
• Has strong ethics and integrity
• Is courageous and inspirational

• Requires a minimum of an Associate's Degree in Accounting or Business Administration or equivalent work experience of at least four years in Payroll Administration.
• Strong decision making, problem solving and analytical skills.
• Excellent communication and customer service skills required.
• Experience with Paylocity is preferred.
• Proficient in Microsoft Excel, Word, Power Point and Outlook.
• Demonstrated ability to complete payroll-related tax returns.

The Bus Aide will help students board the bus, depart from the bus, and arrive safely at their destination. Maintaining a safe environment for students and ensuring the Driver can focus on driving responsibilities are the most important tasks of the Bus Aide.

Embark on a rewarding career journey with us a company proudly recognized as one of the Great Places to Work in 2023-2024! Being a School Van Monitor for Van Pool Transportation gives you the pay you deserve and the benefits you need. You also get to positively impact the lives of children in your community by driving them to school!

What We Offer:

• 20-25 hours per week
• $21.00 - $23.50 per hour
• Split Shifts- 5:30am-9:00am & 1:00pm-5:00pm (example only, exact hours depend on assigned route)
• 401(k) plan option, Dental, Vision, & Company Paid Life Insurance
• Paid classroom and on-the-job training

Requirements:

• Age 18+
• Ability to pass a background check, CORI/SORI, drug screen
• Effectively communicate in English (spoken and written)

What You'll Be Doing:

• Safely assist students as needed. This includes helping them enter and exit the vehicle, using the vehicle's lap and shoulder belts, and safely securing them in car seats and booster seats. Lifting may be required.
• Monitor student behavior to provide appropriate guidance, feedback, and direction when necessary. Report unsafe and inappropriate student behavior to management; follow directions and implement corrective steps as assigned.
• Must be able to communicate effectively and clearly in (English) with students, parents, teachers, and Van Pool staff.
• Must demonstrate effective interpersonal communication skills while using Van Pool's two-way radio system.
• Must have the physical capability to safely install car seats and booster seats.
• Must be able to follow written and verbal directions and instructions from supervisors.
• Must demonstrate a willingness to work effectively with school age children with special needs.

Beacon Mobility is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Beacon Mobility makes hiring decisions based solely on qualifications, merit, and business needs at the time.