Bioconductor Install Jobs in Usa

Epsilon Systems is seeking a Temporary Electrician II for the Modernization and Engineering division located in Portsmouth, VA. Summary: Performs a variety of complex electrical trade functions such as the installation, maintenance, or repair of electronics and/or electrical equipment for the generation, distribution, or utilization of electric energy onboard U.S. vessels/government installations.

• Reports directly to the Production Manager. Once assigned reports directly to the project Foreman in the performance of his/her responsibilities.
• Performs component and/or system troubleshooting to diagnose the problem and provide most cost-effective recommendation for completing repairs.
• Performs and/or verifies mechanical alignments.
• Ensures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Instructions.
• Performs installation, repair, overhaul or modification in place or in shop to electronic or electro mechanical systems and components (e.g.; controllers, switches, pumps, etc.).
• Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.
• Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, Technical Manuals, MILSPECs, etc.).
• Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).
• Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.
• Strictly adheres to corporate, federal, state and local safety regulations. Ensures that all Epsilon Systems Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.
• Performs installation, repair, overhaul or modification shipboard or in shop to electrical or electro mechanical systems and components.
• Performs component and/or system troubleshooting to diagnose problems.
• Ensures that all requirements and detailed repair procedures and instructions are followed according to the company's work instructions, work packages, management guidance to complete the production operations.
• Works from blueprints, drawings, layouts, or other specifications, inspects and tests electrical systems and equipment to locate and diagnose malfunctions, using visual inspections, testing devices.
• Works standard computations relating to load requirements of wiring or electrical equipment, and uses a variety of electrician's hand tools to measure and test instruments.
• Follows blueprints to determine the location of wiring and equipment and to ensure conformance to shipboard requirements.
• Troubleshoots motor controllers, control panels, and power distribution panels.
• Performs Electrical Testing using multimeter, miggers, ampmeters, load banks.
• Assembles multi-pin connectors and fiber optic connections.
• Installs and seats brushes for AC and DC motors / generators.
• Completes inspection and resurfacing of commutators and slip rings.
• Performs work outside of trade if necessary.

• High school diploma or equivalent or vocational training.
• At least 5 years' experience as a marine electrician.
• Understands and is familiar with NAVSEA Standard items.
• Follows NAVSEA Standard Items.
• Experienced in the performance of Energized Circuit work. Basic knowledge of AC and DC electrical theory, power generation, control and distribution.
• Qualified in a minimum two of the following processes copper multi-pin connector assembly or repair. Fiber Optic connector assembly, repair. and testing/ troubleshooting. Soldering of electrical/Electronic components. Electrical design, diagraming. ESD handling and workmanship experience.
• Possess 32 hours classroom training plus 40 hours on-the-job training in Cat5/6, Coax, Triax and Multi-pin connector fabrication and inspection, qualified to MIL-STD-2003-5B (SH)
• Communicates effectively, work independently or in a group.
• Ability to do basic math, i.e. add, subtract, divide and multiply.
• Ability to read, write, speak, and comprehend English.
• Ability to obtain access to military and government installations worldwide.
• Ability to travel required.

• Requires walking, reaching, sitting and concentration in the presence of occasional and loud noises.
• Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).
• Able to lift, carry and move objects up to 50 lbs in weight.
• Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.
• Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
• Able to perceive and distinguish normal range of colors.
• May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.

Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Sr Mechanical Superintendent (Data Center Construction)

Weeks Group is a leading data center Owner’s Representative & Project Manager consulting firm with decades of experience overcoming complex mission critical challenges globally. As a women-owned business, we excel in solving tough problems, ensuring safe, timely, on budget delivery. We solve the hardest problems in the data center construction industry.

Our Values

We Answer the Call

Integrity • Honesty • Trust • Nimbleness

We Don’t Take No for an Answer

Persistence • Determination • Accountability

We Solve Problems

Especially on complex, high-intensity projects

We Expect the Best from Each Other

Teamwork • Communication • Ownership

We BTFM

Innovative thinking with zero tolerance for mediocrity

Role Summary

The Sr Mechanical Superintendent leads field execution of mechanical scope on mission-critical data center projects. This role owns day-to-day onsite leadership for mechanical activities: safety, subcontractor coordination, installation quality, schedule adherence, testing readiness, and turnover support. The Mechanical Superintendent ensures systems are installed correctly, documented properly, and turned over in a manner that supports successful startup, commissioning, and operations.

This is a hands-on, high-accountability role for a leader who can drive production, coordinate seamlessly with electrical and CSA teams, and maintain clean build discipline in critical environments.

Key Responsibilities

Safety & Field Leadership (Primary)

• Lead mechanical field operations while reinforcing a zero-incident culture.
• Ensure subcontractors comply with site safety plans, permits, JSAs/AHAs, LOTO requirements, hot work controls, and housekeeping standards.
• Conduct regular safety walks; correct unsafe conditions immediately and escalate when necessary.

Mechanical Scope Execution (Primary)

Lead and coordinate installation for mechanical systems, including (project-dependent):

• Chilled water / condenser water piping and equipment
• CRAH/CRACs, AHUs, MAUs, exhaust systems
• Cooling towers / fluid coolers / pumps / heat exchangers
• Hydronic specialties, valves, strainers, expansion tanks, insulation
• Mechanical supports, housekeeping pads, curb systems, equipment rigging coordination
• Fire protection interface coordination (as required)
• BAS/BMS coordination for controls and integration readiness
• Equipment access, service clearances, and maintainability requirements

Planning, Sequencing & Schedule Control (Primary)

• Own mechanical short-interval planning (daily/weekly) and support pull planning with measurable commitments.
• Coordinate mechanical rough-in, overhead work, and equipment setting paths with CSA/architectural progress and electrical busway/gear installation.
• Identify constraints early (design gaps, material delays, access conflicts) and drive resolution to maintain schedule.
• Track manpower, productivity, and area readiness; communicate impacts and recovery plans.

Quality Control & Clean Build Discipline (Primary)

• Enforce mechanical installation standards, tolerances, and manufacturer requirements.
• Drive quality walks and manage deficiency/punch lists to closure.
• Protect critical spaces: dust control, cleanliness, protection of finishes/equipment, and strict housekeeping expectations.
• Ensure labeling, tagging, and documentation support turnover and commissioning.

Coordination & Communication (Primary)

• Lead/participate in key coordination meetings: foreman huddles, subcontractor coordination, BIM/VDC coordination, look-ahead planning, and progress walks.
• Coordinate with commissioning agents (CxA), controls vendors, and TAB contractors to ensure readiness and logical execution.
• Communicate field issues clearly with options, impacts, and recommended solutions.

Procurement & Long-Lead Tracking (Supporting)

• Track and support procurement status for mechanical long-lead items (CRAH/CRAC, pumps, towers, valves packages, specialty equipment).
• Coordinate delivery, laydown, rigging plans, and installation readiness with the project team and vendors.

Testing, Commissioning Readiness & Turnover (Primary/Supporting)

• Drive mechanical completion by system/area to support startup and commissioning.
• Coordinate TAB and flushing/cleaning requirements (hydronic cleanliness, chemical treatment as required).
• Ensure prefunctional checklists, test results, and installation sign-offs are complete and filed.
• Support turnover requirements: as-builts, O&Ms, training coordination, warranties, spare parts, and final punch closure.

Knowledge, Skills & Abilities

• Strong mechanical construction background with superintendent-level leadership experience.
• Mission-critical/data center experience strongly preferred; other high-spec industrial or healthcare experience considered.
• Deep understanding of mechanical means and methods, sequencing, and constructability.
• Ability to read drawings/specs and enforce quality with subcontractors.
• Working knowledge of BAS/BMS coordination and commissioning flow (prefunctional → functional → integrated testing).
• Strong communication and conflict resolution skills; calm under pressure.
• Comfortable with field technology (Procore/ACC, Bluebeam, MS Office) and daily reporting.
• Understanding of CPM schedule logic and short-interval planning.

Experience & Education (Typical)

• 7+ years in commercial/industrial mechanical construction, including lead superintendent/foreman responsibility.
• Data center / mission-critical experience preferred.
• OSHA 30 preferred (or willingness to obtain).

Compensation & Benefits

• Competitive base salary based on experience and project scope.
• Performance-based bonus potential.
• Fully paid comprehensive benefits (medical, dental, vision) for you and your family.
• 401(k) Safe Harbor plan.
• Paid time off (PTO).
• Opportunity to work on technically complex data center projects in a high-performance environment focused on long-term growth and leadership development.

JOB SUMMARY

Master Technology Group (MTG) specializes in designing, installing, and servicing low-voltage commercial property technologies across local and national markets.

The Integrated Security Systems Technician (Traveling) provides customer-focused, workplace technology support to clients, field staff, installation partners, and internal team members. While most support work is performed remotely, occasional on-site assistance may be required locally and nationally.

Supported systems are primarily security-related, including video surveillance, access control, intrusion detection, and EAS. Additional support may encompass network programming, fire alarm systems, data infrastructure, AV, and other low-voltage disciplines.

An MTG Integrated Security Systems Technician must deliver exceptional customer service and cultivate strong professional relationships with clients, vendors, Local Service Partners (LSPs), and colleagues. This role requires technical proficiency, extensive knowledge of low-voltage systems, excellent organizational and multi-tasking skills, and strong verbal and written communication abilities.

Candidates must reside in the Twin Cities area and are expected to perform most of their work from our Eden Prairie, MN office. Periodic job site responsibilities may be required locally and nationally, with travel up to 60% supporting client sites, installations, and service operations.

To assist with critical service issues, the role includes on-call duties as part of daily responsibilities, requiring availability after hours on weekdays. Weekend on-call shifts will be rotated on a scheduled basis to ensure support during urgent weekend needs.

This position reports to the Manager of Technical Services.

KEY DUTIES AND RESPONSIBILITIES

• Support customers, coordinators, field technicians, and project managers with technical advice, troubleshooting, and resource allocation
• Collaborate with Business Development and Operations to provide pre-sales and post-sales support for MTG solutions and systems
• Deliver remote and hands-on training to field personnel to ensure compliance with all applicable codes, client specifications, and MTG’s quality standards
• Serve as an escalation point for troubleshooting, programming, maintaining, and servicing client systems
• Pre-program, build, and stage equipment for installation when practical, to streamline on-site setup
• Provide remote and on-site programming and commissioning for client systems
• Conduct remote and on-site quality assurance audits to verify system performance and installation standards
• Assist installation, service, and coordination teams with technical planning, issue resolution, and commissioning, ensuring systems operate as intended and meet MTG quality standards
• Provide user training to client representatives
• Provide technical training to field personnel and colleagues
• Contribute to continuous improvement initiatives by providing feedback to management on processes, efficiency, and client satisfaction
• Deliver outstanding customer service and build strong, professional relationships with clients, vendors, partners, and colleagues
• Other duties to support the company vision and goals as requested

QUALIFICATIONS

• Minimum of 5 years of field experience installing, configuring, programming, and servicing video, access control, and intrusion systems
• MN Power Limited Technician License (PLT) required
• Field experience with low-voltage cabling, data infrastructure, fire alarms, EAS, DAS, AV, and other workplace technology systems is advantageous
• Proven ability to design, configure, and program a variety of security-related systems
• Demonstrated experience in delivering user training to client representatives and technical training to field personnel
• Industry certifications such as NICET Video Security Systems Technician, ESA certifications, or equivalent are preferred
• Manufacturer certifications such as Axis Network Video, Milestone, Genetec, Exacq, Bosch, KeyScan, Avigilon, Lenel S2, March Networks, or Open Options are preferred
• Strong interest and motivation to pursue ongoing education and additional certifications
• Solid familiarity with the National Electrical Code (NEC)
• Ability to meet travel and on-call requirements for the position
• Excellent time management and organizational skills
• Strong problem-solving and decision-making capabilities
• Ability to multitask effectively in a fast-paced, multi-project environment
• Proficiency in Windows-based computer environments, including MS Office (Outlook, Excel, Word) and other standard software
• Excellent written and verbal communication skills

PERFORMANCE MEASUREMENTS

• Demonstrates a clear understanding of the key duties and responsibilities of the position
• Shows enthusiasm and effort to perform all aspects of the role effectively
• Exhibits competence and capability to execute key duties and responsibilities efficiently
• Consistently meets expected standards of quality and customer satisfaction
• Completes assigned tasks promptly and adheres to project deadlines
• Represents MTG in a professional manner at all times, embodying the company’s standards of conduct
• Demonstrates sound decision-making through practical analysis, effective problem-solving, and good judgment
• Maintains effective working relationships and collaborates well within a team environment
• Communicates clearly and professionally, both verbally and in writing, including emails, reports, and correspondence
• Demonstrates reliability through consistent attendance, punctuality, and timely completion of tasks
• Embodies MTG’s Core Values:
• People First: Demonstrates humility, helpfulness, and genuine care for others
• Above and Beyond: Exhibits a “whatever it takes” mindset, actively contributing beyond minimum expectations
• Sense of Urgency: Responds promptly and diligently to organizational and client needs
• Team Player: Demonstrates respect, support, and collaboration, sharing expertise generously
• Do the Right Thing: Operates with honesty, integrity, transparency, and strong ethical standards

COMPENSATION AND BENEFITS

Base Salary $85,000 - $110,000+ DOQ

Car Allowance

Phone Stipend

Medical, Dental & Vision Insurance

401k Match

PTO

Nice Healthcare

Life Insurance – Company-provided

STD / LTD – Company-provided

Employee Referral Bonus

Development Opportunities

About American Meat Companies:

American Meat Companies was founded by Ron and Mariellen Day in a small meat locker in Anaheim, California. From our very modest beginnings in 1975, American Meat Companies has grown to become one of the largest meat purveyors in Southern California and has expanded to a brand new state-of-the-art facility in Dallas, Texas.We produce a full line of steaks, hamburger patties, pork chops, and poultry items, and we make them to your specifications.

We know meat. And it’s all we do. We are passionate about quality and we are extremely proud of the reputation we have earned over the past 46 years.

2nd Shift Industrial Maintenance Tech Job Summary:

Under the supervision of the Facilities & Maintenance Manager, you will be responsible for setting up, installing, repairing, and maintaining production/manufacturing equipment and machinery for a new start-up facility. Inspects equipment for proper functioning and performs preventative maintenance duties per manufacturer's specifications. Diagnosis equipment malfunctions and makes repairs or adjustments as needed. Responsible for assuring all work performed meets Product Safety and Quality, Employee Safety, and Legality of Policies and Procedures.

Essential Duties and Responsibilities:

1. Follow specifications of blueprints, manuals, and schematic drawings; install, maintain and repair

equipment, machinery, physical structures, and plumbing/electrical systems.

2. Inspect, measure, and test equipment while in operation visually (using electrical and electronic equipment) and auditory (listening for unusual sounds from machines or equipment) to detect malfunction, wear, misalignment, or other problems. Inspect used parts to determine changes in dimensional requirements.

3. Discuss/diagnose machine problems with the Maintenance Supervisor, Production Supervisor, Production Superintendent, Plant Manager, or other maintenance workers. Inform appropriate management personnel of equipment and parts needs.

4. Dismantle defective machines and equipment and install new or repaired parts. Reassemble and test machines.

5. Clean and lubricate shaft, bearings, gears, and other parts of machinery.

6. Install and repair electrical apparatus, such as transformers, wiring, and electrical and electronic components of machinery and equipment.

7. Layout, assemble, install and maintain pipe systems and related hydraulic and pneumatic equipment. Repair and replace gauges, valves, pressure regulators, and related equipment.

8. Install, program, and repair automated machinery and equipment, such as robots or programmable controllers.

9. Set up and operate machine tools, such as lathe, grinder, drill, and milling machine, to repair or fabricate machine parts.

Other Duties and Responsibilities:

1. Repair and maintain the physical structure of the establishment and perform preventative maintenance functions.

2. Assist production personnel in change-over and set-up procedures.

3. Attend safety classes/seminars as periodically scheduled.

Decision Making & Problem Solving: Responsible for troubleshooting, diagnosing, and repairing production equipment, including but not limited to industrial blenders, industrial mixers, automated packaging equipment, robotic equipment, pumps, valves, and pressure vessels.

Good Manufacturing Practices: Interprets GMP and HACCP regulations into Company and product-specific practices.

Production Support: Accountable for the efficient installation, maintenance, and repair of Electrical Controls and Mechanical machinery. Equipment includes but is not limited to Hydraulics Combo Dumpers, Meat Blenders, Grinders, Freezers, Scales, Labelers, Case Sealer, Baggers, Seasoning equipment, etc.

Project Management: Engages in cross-functional activities and collaborates across boundaries to ensure successful project implementation. Gathers information to interpret needs, assess requirements, and take the initiative to identify sound solutions through the application of expertise and knowledge. Must have a very strong customer service orientation with a high sense of urgency.

Quality System Compliance: Ensures the requirements of the Quality System, the Quality System Regulation (USDA, FDA), and other relevant standards are fulfilled.

Safety: Enforces Company safety policies and procedures. Responsible for the safe operation and performance of Maintenance and Facility.

Technical Documentation/Communication/Processes: Knowledge of preventive maintenance procedures / Total Productive Maintenance. Prior experience in Computerized Maintenance Management Systems.

Training & Development: Complete training and documentation thereof, in line with Company policies and procedures.

Other Compliance: Works to ensure compliance with all applicable laws and regulations issued by OSHA, EPA, Labor & Employment Law, and other federal, state, and local regulations, including Lock-out/Tag-out, confined spaces, and personal protection regulations.

Job Requirements (Education, Work Experience, Certifications, Skills)

Education: High school or equivalent (Required), Technical Degree (Preferred), technical training, or equivalent years' experience acceptable in place of formal education. Must be computer literate with proficiency in using CMMS systems.

Work Experience: Minimum five (5) years of industrial maintenance experience in manufacturing (Food Preferred); strong in precision maintenance, electro-mechanical troubleshooting, and other industrial skills to include pneumatic and hydraulic system knowledge with; experience with mechanical systems (e.g., gear boxes, chains, sprockets, motors, seals, bearings), product manuals (e.g., reading and applying knowledge to make repairs), troubleshooting mechanical breakdowns (pinpointing and fixing breakdowns), and reading mechanical drawings (e.g., hydraulics, pneumatics); Experience with electrical systems to include low voltage control circuits, motor circuit controls, VFD s, PLC troubleshooting knowledge (Rockwell PLC/HMI knowledge), and electrical safety systems required.

Certifications: OSHA 40 (Preferred)

Skills:

Ability to communicate effectively with a variety of individuals.

Ability to work in a fast-paced environment.

Ability to reason, negotiate, instruct, persuade, or speak with others.

Ability to pay close attention to detail.

Strong interpersonal skills and judgment in communicating with staff.

Receptive to management development suggestions and willing to seek additional knowledge to facilitate job growth.

Excellent written and oral communication skills.

Proven ability to juggle multiple tasks simultaneously.

Ability to interpret HR regulations, safety rules, operating and maintenance instructions, and procedures manuals.

Ability to solve complex problems.

Fully competent to a high degree in mechanical knowledge.

Ability to troubleshoot electrical controls.

Ability to follow verbal and written instructions, as well as interpret pencil sketches and diagrams.

Ability to read ladder logic and use it to troubleshoot systems.

Other Duties and Responsibilities:

May be required to work overtime, evenings, or weekends to complete work. May be required to work flexible shifts, including on-call.

Other duties and tasks as assigned.

Job Type: Full-time

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Vision insurance

Schedule:

• 2nd Shift
• Holidays
• Possible Overtime
• Weekends as needed

Work Location: In person

COMPANY OVERVIEW

JTI is a growing, progressive, and team-oriented company rooted in family values. We know that our employees are our number one asset. We not only encourage, but foster an environment that promotes professional growth, internal promotions, continuing education, and a safe work environment.

We are proud to employ a team of dedicated professionals with expertise in electrical construction, mechanical fabrication and installation, engineering, and controls and automation fields who are leaders in their disciplines. We strive to be an excellent strategic partner for clients, providing solutions and adding value to their businesses.

POSITION OVERVIEW

The Journeyman Electrician is responsible for the installation, maintenance, and repair of electrical systems in residential, commercial, and industrial environments. This role requires a deep understanding of electrical systems, blueprints, safety codes, and regulatory compliance. The ideal candidate will possess strong troubleshooting skills, attention to detail, and the ability to work independently or as part of a team.

PRIMARY RESPONSIBILITIES

• Perform site survey activities with a team and independently
• Perform routine maintenance on electrical wiring and systems
• Review job installation plan with the Crew Lead
• Assist in tracking inventory for each project
• Troubleshoot, test, repair and service technical equipment
• Troubleshoot motor and control systems
• Install and repair electrical equipment and fixtures
• Install various types of raceway and cable tray systems
• Adhere to all quality and safety codes
• Clean up the job site

QUALIFICATIONS

EDUCATION and/or EXPERIENCE:

• Journeyman/Journeywoman Electrician License
• Minimum 5 years of electrical experience
• Proficient knowledge of installation of PVC coated rigid conduit systems
• Able to lead a crew of various sizes ranging from 2 – 5 people
• Strong problem solving and critical thinking skills
• Must be able to pass a pre-employment drug screen
• Familiarity with electrical equipment and hand tools
• Familiarity with electrical schematics, blueprints, and manuals

EQUIPMENT & APPLICATIONS /WORKING CONDITIONS & PHYSICAL DEMANDS:

• Lifting and Carrying – Frequently lifting and carrying tools, materials, and equipment, often weighing up to 25-50 lbs.
• Climbing and Balancing – Using ladders, scaffolding, and lifts to reach high areas for wiring and fixture installations.
• Crouching and Kneeling – Working in tight spaces like crawlspaces, attics, and vaults.
• Standing for Long Periods – Spending hours on their feet while wiring or troubleshooting.
• Repetitive Movements – Engaging in repeated motions such as twisting, bending at the waist, kneeling, stripping wires, twisting connections, and using hand tools continuously
• Working in Uncomfortable Positions – Holding tools or equipment overhead, reaching into confined areas, or maintaining awkward postures.
• Exposure to Weather – Working outdoors in extreme heat, cold, rain, or wind
• Hand and Finger Dexterity – Grasping objects with the use of fingers, palm and wrists to hold/and or manipulate objects (hammers, saws, pencils, pens, etc.)
• Pulling and Pushing – Pulling wires through conduits or pushing heavy equipment into place.
• Carrying Personal Protective Equipment (PPE) – Wearing and carrying safety gear like hard hats, gloves, harnesses, and boots.

MINIMUM EQUIPMENT REQUIREMENTS (General Overview)

Hand Toolso

• Needle-nose pliers
• Side-cutting pliers (Lineman's pliers)
• Diagonal-cutting pliers
• Tongue-and-groove pliers (Channellock’s)
• Wire strippers

Screwdriverso

• Flathead screwdrivers (various sizes)
• Phillips head screwdrivers (various sizes)
• Insulated screwdriver set

Wrenches

• Adjustable wrenches (various sizes)
• Combination wrench set
• Allen wrench set (Hex keys)

Saws and Cutting Tools

• Hacksaw
• Drywall saw
• Utility knife

Measuring and Marking Tools

• Tape measure
• Level (torpedo level)

Conduit Tools

• Conduit reamer

Miscellaneous Tools

• Hammer
• Fish tape
• Torpedo level
• Multimeter or voltage tester
• Flashlight or headlamp
• Tool pouch – Belt – or backpack for Tool mobilization

Cabinetry Designer / Project Manager

New Holland, PA

Do you enjoy designing custom cabinetry, guiding homeowners through design decisions, and managing the details that bring high-end residential projects from concept to installation?

Why You'll Love Working with Us:

• See Your Work Come to Life: Guide projects from concept through installation and enjoy the satisfaction of a finished space.
• High-end Custom Projects: Design and manage cabinetry for beautiful renovations and new home builds in the luxury residential market.
• Flexible Schedule: A work environment that respects family commitments and encourages balance.
• Direct Access to Leadership: Work directly with company owners who prioritize the team and the quality of every project.
• Family-focused Culture: Join a close-knit team that values relationships, collaboration, and supporting one another.

Since 1979, Foxcraft Cabinets has created exceptional homeowner experiences through custom cabinetry, thoughtful design, and outstanding service. Working closely with homeowners, designers, and contractors, our team delivers high-end projects guided by excellence, integrity, innovation, and Christian faith.

What You'll Do as a Cabinetry Designer / Project Manager:

• Guide homeowners through the custom cabinetry design process from initial consultation through final installation.
• Build strong working relationships with contractors, architects, and designers to support successful projects and repeat business.
• Help customers make cabinetry design selections and think through layout, materials, and functional details.
• Create cabinet design drawings using Cabinet Vision or similar CAD software to translate design concepts into production-ready plans.
• Communicate intent to customers, contractors, and the shop production team.
• Prepare & present proposals and contracts using pricing provided by the sales team.
• Visit job sites to verify field measurements and confirm designs align with site conditions.
• Serve as the primary point of contact for customers, coordinating communication between sales, drafting, production, and installation teams.
• Support project execution through scheduling updates, site visits, and first-day installation coordination.

Our Ideal Cabinetry Designer / Project Manager:

• Experienced: 3+ years of custom cabinetry experience required (cabinet installation, design, sales, or cabinet construction). Natural eye for design and ability to balance form and function preferred. Basic construction knowledge (electrical, plumbing, framing, ventilation, etc.) is helpful.
• Communicator: Asks thoughtful questions, gathers complete information, and clearly communicates the design vision with homeowners, contractors, and team members.
• Organized & Detail-oriented: Manages measurements, selections, and documentation so designs translate accurately into finished cabinetry.
• Collaborative: Humble, teachable team player who contributes ideas while supporting the Foxcraft methods and values.
• Adaptable: Manages multiple projects and shifting priorities while keeping work moving forward.
• Computer Savvy: Comfortable using Outlook and design software; Cabinet Vision experience preferred.
• Active: Comfortable moving around construction sites, climbing ladders, and taking measurements.

What We Offer Our Cabinetry Designer / Project Manager:

• $80,000-$150,000/year, DOE
• Full-time position, typically 45 hours per week; flexible schedule (approx. 7:00 AM-5:00 PM)
• Quarterly Family Assistance Allowance for Health Insurance costs
• Paid time off
• Paid holidays
• Company computer & tablet provided
• Car allowance or mileage reimbursement
• Family-oriented, team-focused company culture
• Strong emphasis on excellence, integrity, & innovation

To Apply

If you enjoy guiding homeowners through custom cabinetry design and managing projects from concept to installation while delivering an exceptional customer experience, please submit your application for consideration.

By submitting this application, you agree to receive recurring informational text messages (e.g., appointment alerts) that may be automated to the mobile number you provided at opt-in from Team Builder Recruiting, LLC. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.

Casework Project Manager

Location: Wood Dale, IL

Position Type: Full-Time

Position Overview

Carroll Seating Company is seeking a detail-oriented and field-driven Casework Project Manager to join our Wood Dale team. This role is responsible for managing commercial casework projects from kickoff through final handoff, with a strong focus on field execution, coordination, and jobsite oversight.

The ideal candidate is proactive, organized, and comfortable managing multiple moving parts, from performing field checks, factory releases to installation coordination, while serving as the primary point of contact in the field.

Key Responsibilities

Project Management & Field Oversight

• Manage assigned casework projects from project kickoff through final completion and handoff
• Oversee jobsite activities to ensure work is performed safely, accurately, and on schedule
• Manage design and contractor changes throughout the installation process
• Conduct site visits to monitor progress, resolve issues, and maintain quality standards
• Coordinate with general contractors, subcontractors, installers, manufacturers, and internal teams

Factory & Production Coordination

• Review and manage job releases to the factory
• Ensure accurate documentation, specifications, and approvals prior to production
• Coordinate timelines with production to maintain project schedules

Installation Management

• Arrange and schedule installation crews
• Provide installers with necessary documentation and jobsite details
• Monitor installation progress and address field conditions or changes as needed

Communication & Documentation

• Lead project kickoff meetings
• Maintain clear communication between sales, design, factory, installation teams, and clients
• Track project schedules, budgets, and change orders
• Ensure all closeout documentation is completed for final handoff

Qualifications

• 3–5+ years of project management experience in commercial casework, millwork, furniture, or construction
• Strong understanding of jobsite coordination and construction processes
• Ability to read architectural drawings and specifications
• Experience managing factory releases and installation schedules preferred
• Strong organizational, problem-solving, and communication skills
• Proficiency in Microsoft Office; project management software, BlueBeam experience is a plus
• Willingness to travel to Illinois and Wisconsin jobsites as required

Benefits

• Health benefits included
• Gas and mileage reimbursement
• Monthly cell phone allowance
• Company-provided computer

The Broward County Board of County Commissioners is seeking qualified candidates for Industrial Electrician.
This Job Announcement will remain open until a sufficient number of applications are received.

**MUST BE ABLE TO WORK NIGHTS, HOLIDAYS AND WEEKENDS**

Benefits of Broward County Employment

Eleven (11) paid holidays each year

Vacation (Paid Time Off) = 2 weeks per year

Tuition Reimbursement (Up to 2K annually)

Up to 40 hours of Job Basis Leave for eligible positions

Paid Parental Leave

Health Benefits

High-Deductible Health Plan - bi-weekly premiums: Employee $10.90 / Family $80.79

Includes a County Funded Health Savings Account of up to $2000 Annually

Consumer Driven Health Plan - bi-weekly premiums: Employee $82.58 / Family $286.79

Florida Retirement System (FRS) - Pension or Investment Plan

457 Deferred Compensation County matches up to $2,000 a year.

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

- Installs, repairs, and maintains electrical components of high voltage industrial equipment.- Install and troubleshoot high voltage electrical apparatus that may include motors, breakers pumps, control panels, disconnect switches, generators, variable frequency drives, soft starts, programmable logic controllers and motors up to 1000 HP.
- Perform work on work on high voltage and operate on live circuits with higher levels of voltage 4160
- Perform daily work and maintenance on live circuits with 3-phase 480 volts as a standard; includes working on230 volts and 115 volts.
- Installs branch circuits, lighting fixtures, sound systems, generators, motors and transformers; repairs relays, switches, control boxes and equipment such as fans and communication equipment; replaces defective ballasts, circuit breakers, control transformers, receptacles and fuses; may supervise helpers assigned to various jobs.
- Troubleshoots a variety of electrical equipment/system problems in order to identify the nature and extent of the maintenance/repair problem, identifies the type of repair/preventive measure needed, identify potential safety issues, etc.
- Estimates/determines materials, supplies, equipment, and time needed to complete assigned electrical work and orders/projects in order to facilitate scheduling, identify approximate costs and staffing needs, identify type/amount of materials needed, and/or ensure materials, supplies, and equipment needed are available.
- Performs a variety of routine electrical maintenance/repairs in order to maintain facility/equipment in operating condition, ensure safe work environment, and/or ensure electrical service is not interrupted.
- Performs scheduled preventive maintenance on a variety of electrical equipment/services in order to identify potential problems, minimize need for emergency repairs, and/or maximize the useful life of the equipment.
- Performs related work as assigned.

WORK ENVIRONMENT

Physical Demands
Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.
Performs medium work that involves walking, standing, stooping, stretching, or lifting all of the time and also involves exerting between 20 and 50 pounds of force on a regular and recurring basis or exceptional skill, adeptness, and speed in the use of fingers, hands, or limbs in tasks involving very close tolerances or limits of accuracy.
Unavoidable Hazards (Work Environment)
Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.
Involves routine and frequent exposure to electrical shocks; heights; small spaces.

SPECIAL INFORMATION

Competencies

• Manages Complexity

• Action Oriented

• Plans and Aligns

• Ensures Accountability

• Drives Results

• Communicates Effectively

• Self-Development

• Situational Adaptability

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.