Assembly Computer Code Jobs Remote Jobs in Usa
97 positions found
Work in a team environment.
Assemble and pack product.
Spin welder, handle welder, swivel lid assembly machines, carton-taping machine, lid snapper.
Accurately read routings and inform supervisor if there are errors.
Accurately enter order information in computer.
Perform quality checks.
Perform packing duties Properly dispose rejected material.
Assist with training new TeamMates.
Perform other duties as assigned.
Qualifications • Good reading and comprehension skills.
• Adequate communication skills.
• Ability to work with little supervision.
• Differentiate colors / color codes.
Operating automated samples board assembly line Verify the parts required prior to assembly Understanding of the assembly processes Work in a team environment Operate assigned production station on the assembly line using production equipment Perform a variety of assembly operations Vary depending on product assembly instruction.
Akkodis is seeking a Mechanical Designer I with a client in Waltham, MA 02451 for 12 months contract.
Title: Mechanical Designer I
Location: Waltham MA 02451- Hybrid
Contract: 12 months (possible extension)
Pay Rate: $40-42/hr on w2 (The rate may be negotiable based on experience, education, geographic location, and other factors)
Role summary
• Support LNG operations by producing, updating, and maintaining compliant Process and Instrumentation Diagrams (P&IDs) and related mechanical and minor civil drawings using company standards in AutoCAD.
• Assist project engineers; support construction/start up activities; and maintain electronic drawings in as built status across department assets.
• Maintain organized drawing files and follow company document control practices to keep drawings current.
Responsibilities
• Use AutoCAD to prepare and revise P&IDs, general layouts, plans and profiles, fabrication drawings, isometrics, and pipe support details.
• Draw finished designs from sketches/redlines; create and revise detail, assembly, and general arrangement drawings.
• Set up and maintain an organized file system and drawing database with standardized naming conventions.
• Convert legacy formats (e.g., Visio, AutoCAD LT) to a consistent, singular standard.
• Perform site visits and field verification to confirm drawing accuracy.
• Prepare minor civil drawings for equipment foundations and buildings.
• Coordinate with engineers, project teams, and vendors to ensure accurate electronic representation and updated vendor resources.
• Follow Management of Change processes to keep drawings aligned with capital projects and modifications.
• Support development of as built records for existing facilities and capital projects.
Qualifications Required
• High school diploma or equivalent.
• Associate degree or three years of practical experience.
• Advanced proficiency with AutoCAD.
• Experience with CADWorx and/or AutoCAD Plant 3D.
• Proficient communication skills and ability to collaborate across all phases of a project.
Preferred
• Certifications: American Design Drafting Association (ADDA), Autodesk, and/or SolidWorks.
• Prior gas design experience and knowledge of gas equipment.
• Knowledge of relevant codes/standards (e.g., Federal DOT, Massachusetts state codes, applicable industry standards).
• Understanding of LNG plant operations and maintenance functions.
Equal Opportunity Employer/Veterans/Disabled
Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client.
To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:
· The California Fair Chance Act
· Los Angeles City Fair Chance Ordinance
· Los Angeles County Fair Chance Ordinance for Employers
· San Francisco Fair Chance Ordinance
Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.
We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins.
Job Description
Job Summary:
Under limited supervision, performs a wide variety of repetitive and non-repetitive bench or line mechanical subassembly and assembly operations of a skilled nature to produce products, also making required minor adjustments in the assemblies as needed. Determines methods and sequence of assembly operations where complete information is not readily available or follows assembly shop and production operation sheets, samples, drawings, schematic and verbal instructions to perform a wide variety of assembly operations such as wiring, component installation and hand soldering, utilizing power tools, and small hand tools such as soldering irons, wire strippers, crimpers, wrenches, screwdrivers and pliers. Identifies and selects components to be integrated into subassembly and assembly units. Makes own set-ups, alignments and adjustments maintaining tolerance in accordance with instructions. Disassembles, modifies, reworks, refurbishes, reassembles, and tests units as required, and all other duties as assigned.
Essential Duties and Responsibilities include the following. Other duties may be assigned.
- Follows production drawings, sample assemblies and verbal instructions with close supervision. Understands and applies established acceptable workmanship practices to all facets of mechanical assembly.
- Interprets and works from schematics, drawings, work instructions and bills of material to understand the required parts and steps needed to complete the assigned assembly.
- Makes accurate mathematical calculations and uses precision measuring instruments as required.
- Uses a wide variety of hand and power tools to perform skilled fitting and assembly work. Inspect parts and performs basic tests.
- Tends machines, such as arbor presses or riveting machine, to perform force fitting or fastening operations on assembly line.
- Works at different work stations as production needs require. Works on line where tasks vary as different model of same article moves along line.
- Performs intermediate testing, assembly and or disassembly of mechanical assemblies using both traditional and non-traditional tooling such as multimeter, oscilloscope, spectrum analyzer, power supply, function generator, LCD meter, screwdriver, torque wrench, standard wrench, etc.
- Mounts complex assembled components, such as transformers, resistors, transistors, capacitors, integrated circuits, and sockets, on chassis panel, requiring manual dexterity and the ability to work with hand tools, power tools, soldering equipment, volt meters and other related test instrumentation. Knowledge of cleaning, lead preparation, component mounting, parts orientation.
- Positions and aligns parts in specified relationship to each other in jig, fixture, or other holding device.
- Crimps, stakes, screws, bolts, rivets, welds, solders, cements, press fits, or performs similar operations to join or secure parts in place.
- May perform other general assembly tasks such as potting, encapsulating, sanding, cleaning, epoxy bonding, curing, stamping, etching, impregnating, and color coding parts and assemblies.
- Adjusts or trims materials from components to achieve specified electrical or dimensional characteristics.
- May perform hand soldering using a soldering iron.
- May perform work (soldering and general inspection) under microscope.
- Performs online go-not-go testing and inspection to ensure parts and assemblies meet production specifications and standards.
- Troubleshoots and replaces defects of finished products.
- Reworks and repairs defective units rejected by inspection or test personnel.
- Follows safety procedures in the use and handling of flammable and hazardous chemicals required to meet all cleanliness specifications.
- Must be able to follow specific procedures and detailed instructions completely.
- Ensures that quality checks are completed throughout the manufacturing process.
- Records information on production records, logs and other report forms.
Supervisory Responsibilities
This job has no supervisory responsibilities but may provide technical leadership to lower-level mechanical assemblers including carrying out lead responsibilities in accordance with applicable regulations and laws and the organization's policies and procedures. This includes, but is not limited to training employees, planning, assigning, directing work and resolving technically related work problems.
Competencies
To perform the job successfully, an individual should demonstrate the following competencies:
- Oral/Written Communication - Listens and gets clarification; Responds well to questions; Records data; Writes clearly and informatively; Able to read and interpret written information.
- Teamwork - Gives and welcomes feedback; Contributes to building a positive team spirit; Supports everyone's efforts to succeed.
- Ethics - Treats people with respect; Works with integrity and ethically.
- Organizational Support - Follows policies and procedures; Supports organization's goals and values.
- Planning/Organizing - Uses time efficiently.
- Professionalism - Approaches other in a tactful manner; Accepts responsibility for own actions; Follows through on commitments.
- Quality - Demonstrates accuracy and thoroughness; Applies feedback to improve performance; Monitors own work to ensure quality.
- Quantity - Meets productivity standards; Completes work in a timely manner; Strives to increase productivity.
- Safety and Security - Observes safety and security procedures including using Personal Protective Equipment (PPE) as required and wearing company issued badge when on company property; Reports potentially unsafe conditions; Uses equipment and material properly.
- Adaptability - Adapts to changes in the work environment.
- Dependability - Follows instructions, responds to management direction.
- Attendance/Punctuality - Is consistently at work and on time.
- Initiative - Asks for and offers help when needed.
Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education and/or Experience Vocational or Technical Certificate in related field and a minimum of 5 years of directly related experience, and/or training; or equivalent combination of education and experience.
Language Skills
- Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
- Ability to write routine reports and correspondence.
- Ability to speak effectively before groups of customers or employees of organization.
Mathematical Skills
- Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
- Ability to apply concepts of basic algebra and geometry.
Reasoning Ability
- Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
- Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
Computer Skills
To perform this job successfully, an individual should be able to enter time and data into a computer system. An individual may require knowledge of database software; inventory software; manufacturing software; spreadsheet software and/or word processing software.
Other Essential Duties
- Follows all import/export requirements, consulting with facility import/export personnel as required.
Other Skills and Abilities
- Basic Knowledge of ISO and/or AS9100
- Working knowledge of Lean Manufacturing/6 Sigma/Kaizen
- Knowledge of specific software (design, analysis, ERP...)
Other Qualifications
- US Citizenship with ability to attain/maintain government security clearance.
- Ability to travel (domestically/internationally) approximately _+/-10__%.
#TBE
Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions.
Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Test and Evaluation (BT&E) is seeking multiple Machinist Assemblers Precision to join our Machinist departments in either Seattle, WA or Tukwila, WA.
Machinists in this position participate in the design, fabrication and assembly of various production and research projects. Using a variety of precision machines (e.g., lathes, grinders, EDM, CNC and milling machines) to support aircraft engineering and production groups.
Position Responsibilities:
- Perform bench work (e.g., drilling, honing, tapping, reaming) on production and experimental parts, as required
- Assemble parts using rivets and bolts with correct tools such as rivet squeeze, lock bolt puller, rivet gun and bucking bar, power screwdriver, or ratchet per engineering requirements
- Lay-out, plan and sequence machining operation
- Analyze and interpret drawings, sketches, blueprints and verbal instructions to determine work to be performed on detailed precision parts (e.g., aircraft castings, fixtures, tools, shop aids)
- Use shop math, geometry and/or trig to calculate dimensions
- Determine/obtain raw material to be used (e.g., brass, aluminum, steel, composites, and wood) for machining or fabrication per drawing or customer requirements
- Set up operate and adjust all common machine tools (e.g., lathe, mill, bridgeport, electrical discharge machine (EDM), drill press) to accomplish work on precision assemblies
- Select machine to be used in machining process
- Check machine to be used for missing, loose, damaged equipment, check oil and coolant levels and fill, as required
- Write programs as required for multi axis machines
- Adjust machine settings (e.g., speeds and feeds) to correct machining problems or to prepare machine for next operation in sequence
- Perform minor editing of CNC programs per shop requirements
- Select and check cutting tools per program or CNC documents
- Ensure cutters are the correct type, length, diameter, radius, and are in good condition
- Select machine accessories and holding devises (e.g., chucks, vises, turntables)
- Verify that apparatus is in good condition
- Identify fixtures and/or shop aids to be built and fabricate as required using mill, lathe, bandsaw, drill press, sander and grinder
- Attach machine accessories, tools and shop aides using dial indicators, edge finders, wrenches, bolts, clamps, and overhead cranes
- Monitor machine during operation for unusual vibration or sounds, watch machine gauges and controller display or digital readout for warnings, visually check cutter path, clearance and chips to ensure smooth operation
- Check work with precision instruments (e.g., micrometers, dial indicators, height gauges) and ensure parts are free from defects (e.g., finish, dimensions, mismatch, tool marks) and complete per drawing, sketch or verbal instructions
- Assemble, fit, check, test of developmental machine parts and assemblies to customer specification
- Troubleshoot and test precision assemblies with working groups (e.g., engineering, production, inspection, manufacturing resource & development (MRD)) to resolve tooling/production problems
- Handle and dispose of hazardous materials (e.g., coolants, solvents) in approved manner (per Material Safety Data Sheets) using personal protective equipment, as required
- Maintain personal tool certifications, as required
- Ability to use computers and knowledge and ability to use MSWord, Excel, Outlook, etc.
- Must be willing to work variable shifts, including weekends and overtime; some positions may also be rotating shifts
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee.
Basic Qualifications (Required Skills/Experience):
- 1+ years of experience with multiple Computer-Aided Design (CAD) and/or Computer-Aided Manufacturing (CAM) applications (e.g. Mastercam, CATIA V5, Unigraphics, etc.)
- 1+ years of experience programing, setting-up and running lathes, grinders, mills, and Computer Numerical Control (CNC) machines
- Experience reading G and M codes
Preferred Qualifications (Desired Skills/Experience):
- Experience with ENOVIA design tool
- Completed training as a journeyman machinist
- Graduated from an Machinist Apprenticeship program or completed a Machining Certificate
Drug Free Workplace :
Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Shift:
These positions are for either 1st or 2nd shift; however, there may be additional shift requirements to support program objectives.
Union:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will be considered as this job is not installed in QTTP.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range: $33.32/hour to start for new union members, with potential to earn up to $61.01/hour, at max pay
Applications for this position will be accepted until Mar. 21, 2026
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
- Fabrication/Assembly I4 (M13BI4) Duration: 9 Months Location: Wichita, KS 67210 Pay Rate: $41 to $44/hr on W2 Description : Level B 1.
Use and interpret drawings, inspection manuals and specifications, shop mathematics precision measuring instruments, specialized inspection machines, tools and equipment necessary to accomplish work assignments.
2.
Experience working with Quality Management System Policies and Procedures 3.
Working knowledge of Company Policies, Procedures and Specifications 4.
Overall working knowledge of production processes 5.
Contact other company organizations or customer representatives, as required to coordinate and accomplish work assignments.
6.
Good communication skills written and verbal 7.
Good computing skills 8.
Operate testing machines, calculate and record results 9.
Maintain certifications as required 10.
Plan own sequence of operations 11.
Follow Inspection (shop) procedures to accept or reject processes/parts/assemblies 12.
Verify that tools are qualified 13.
Prepare and maintain Quality records 14.
Work across equivalent or lower-level Inspector job codes as required 15.
Crosstrain in equivalent level Assembly, Composite, Metals, Process and Systems/Payload Structures Mechanic classifications Responsibilities M13 Level B Use and interpret drawings, inspection manuals and specifications, shop mathematics precision measuring instruments, specialized inspection machines, tools and equipment necessary to accomplish work assignments Experience working with Quality Management System Policies and Procedures Working knowledge of Company Policies, Procedures and Specifications Overall working knowledge of production processes Good communication skills written and verbal Good computing skills Maintain certifications as required Follow Inspection (shop) procedures to accept or reject processes/parts/assemblies Verify that tools are qualified Prepare and maintain Quality records Work across equivalent or lower-level Inspector job codes as required Qualifications Required: Prompt and on time daily Ability to obtain all required training certifications and maintain certifications while on assignment Must be available to work any shift- 1st, 2nd and 3rd shift operations Available for periods of heavy overtime 5 years' experience in aerospace airframe assembly inspection Blueprint reading experience MS Office and SAP experience Experience writing NCRs (Tags) Preferred: SAP experience Previous Spirit or Boeing experience Boeing 737 Airframe/Fuselage Experience Spirit, Aircraft, Boeing, Structures), Airbus
- 1:30 PM Cleanroom environment
- Must be able to read and understand English Description: This is a non-exempt position.
This position is responsible for the production of high-quality medical devices within a manufacturing cell.
Working under close supervision may perform a combination of assembly, repair, and test operations on pacemakers, implantable cardioverter defibrillators (ICDs), leads, and related medical device assemblies.
Performs routine assignments according to specified and standardized procedures.
Work is closely and continually reviewed.
Ensure that relevant job documentation for cell operations and functions is accurate and up to date.
Be able to clearly communicate ideas, problems, and solutions to all levels of manufacturing management in both written and oral form.
Maintain a positive attitude when interacting with internal and external customers such as tours.
Follow safety guidelines and utilize appropriate safety devices when performing all operations.
Participate in continuous improvement/quality initiatives in order to enhance production processes to achieve quality and profitability metrics.
Maintain accurate records to ensure traveler and quality documents are accurate, all parts are traceable and quality issues can be addressed to assure the quality of all products.
Demonstrates a basic understanding of Lean Manufacturing.
Participate with the Manufacturing Supervisor/Manager in setting and monitoring individual goals and cell performance metrics that continuously seek to improve the quality of operations.
Support all Divisional initiatives as identified by divisional management and in support of Quality Management Systems (QMS), Environmental Management Systems (EMS), and other regulatory requirements Ability to read, comprehend, and follow written procedures; understand and follow verbal instructions
- Understanding of and ability to utilize electronic data collection systems and computer software packages.
Ability to prioritize work by determining the sequencing and timing of different jobs based on precedence and importance.
Ability to handle and maneuver small components and parts.
Ability to make critical decisions and judgments with minimal supervision.
A high school degree or equivalent is required.
Required dress code for tour during interview and on-the job: Clothing must be non-shedding and free of frayed hems or loose threads.
Tassels, fringes, glitter, sequins (sewn or glued on), and any other items that could become dislodges are not allowed on clothing.
To verify a fabric can be worn: pull at the fabric tightly with your fingers, if fibers are dislodged, the garment may not be worn in the production area.
Sweaters, sweater vests, loose fiber garments, loose knit, or fleece may not be worn.
All clothing must be clean and free of visible contamination (sand, mud, dirt, lint, etc.).
All clothing, from the waist up, must fit under the lab coat/gown.
Turtle necks or high-necked clothing shall not stick out above the neck of the lab coat/gown.
Sleeves shall not stick out beyond the cuff of the lab coat/gown.
Caps, hats, scarves, or bandanas shall not be worn under the bouffant.
Head wraps/scarves worn to accommodate customs: Must be covered by the bouffant and the tail end of the scarf must be fully covered by the lab coat/gown.
Must be of tightly woven fabric, be clean, and laundered.
Loose-fitting clothing shall not be worn around machinery or soldering/brazing torches.
Shoes must be worn at all times in the production area.
Stockings or socks are required.
The heel of a shoe must not be pointed or higher than 2 inches.
Sandals, clogs, slippers, and open-toe, or open-heel shoes are not allowed.
Shoes with straps or weave where toes can be seen are not allowed.
Changing shoes in the production area, other than a gowning room, is not allowed.
Torsos, upper arms, and legs must be covered.
Pants (above the ankle), skirts (above the ankle), skirts with slits, short shirts (above the navel), and sleeveless tops are not allowed.
Skirts at the ankle are allowed, but full-length stockings, leggings, or pants must be worn under them.
Nail polish, acrylic, artificial nails, or similar nail coatings are not allowed.
Jewelry or body piercings that can pierce gloves or cannot be covered under gowning materials will not be permitted in the production area.
Makeup shall not be worn.
Lip balm in stick form is acceptable when applied outside of production areas and prior to hand washing.
Scented personal use products shall not be worn, except deodorant.
Lotions shall not be applied after hand washing.
Cover any open or bleeding wound with a bandage.
Don't wear anything that could be offensive.
Maintain inventory and orders orthopedic medical supplies and/or durable medical equipment Assembling medical devices for a medical supply company in a laboratory clean room work environment Assembling medical devices in a laboratory clean room work environment Build complex medical devices under minimal direction and supervision Assembling medical kits according to PIC slips Completed in compliance with company quality system and medical device regulations Assemble medical products, performing a variety of tasks on a rotating basis Inspect, stock, and ship disposable medical supplies down the product line Assemble medical components, subassemblies, products or systems Utilizing hand-held/bench machinery to facilitate the assembly of medical products of a simple to complex nature Read and follow written work instructions Understanding of FDA and international regulatory requirements for medical device packaging validation Assemble and test medical devices and related products in accordance with documented work instructions and procedures Performing light assembly on medical devices according to client specifications Inspect assembles per Manufacturing Procedure or Assembly drawings Lead the start-up and ongoing operation of the Company's medical device package testing group Assemble and test medical device assemblies, final products, and accessories per the manufacturing documentation Assemble, bonds coats and process medical devices and related parts using microscopes and applicable tools Examine medical devices and related assemblies after molding operations to locate bubbles, nicks and/or excess epoxy Interpret applicable medical device regulations including 21 CFR Part 820, ISO standards, CDRH guidelines and medical device directives
LocationAtlanta, Georgia
Full/Part TimeFull-Time
Regular/TemporaryRegular
Add to Favorite JobsEmail this Job
About Us
Overview
Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.
About Georgia Tech
Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.
Georgia Tech's Mission and Values
Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:
1. Students are our top priority.
2. We strive for excellence.
3. We thrive on diversity.
4. We celebrate collaboration.
5. We champion innovation.
6. We safeguard freedom of inquiry and expression.
7. We nurture the wellbeing of our community.
8. We act ethically.
9. We are responsible stewards.
Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.
Job Summary
The Electrical Integrator L2 will provide technical support to program managers, project directors, task leads, and senior-level Electrical Integrators. The Electrical Integrator L2 will help with mid-level troubleshooting, repair, and maintenance of electrical cables, circuits, and assemblies.
This position will interact on a consistent basis with: faculty and staff project/task leaders, technical leads, contractors, and vendors
This position typically will advise and counsel: faculty and staff project/task leaders, technical leads, contractors, and vendors
This position will supervise: N/A
Responsibilities
Job Duty 1 -
Support program managers, project directors, and task leads with mid-level electrical assembly work such as cable assembly fabrication, and electrical chassis fabrication and assembly
Job Duty 2 -
Help with mid-level testing and troubleshooting of circuits and systems
Job Duty 3 -
Provide intermediate levels of maintenance and repair of printed circuit boards and printed circuit board assemblies
Job Duty 4 -
Assist with kitting parts using a Bill of Materials or other online inventory tools; help provide data entry for online inventory tools
Job Duty 5 -
Support other work teams, as needed, with skills such as mechanical assembly, welding, metal work, drafting, parts inventory, and technical documentation
Job Duty 6 -
Provide guidance to more junior-level technicians
Job Duty 7 -
Perform other job-related duties as assigned
Required Qualifications
Educational Requirements
Technical Diploma, Associate's Degree, or two years college course work, or an equivalent combination of education and experience
Required Experience
Two to five years of job-related experience
Preferred Qualifications
Preferred Experience
IPC-610
IPC-620
J-STD-001
IPC-7711
IPC-7721
Knowledge, Skills, & Abilities
ABILITIES
Experience using crimping tools preferred
KNOWLEDGE
Familiarity with hand tools and a basic understanding of AC/DC circuits; a basic understanding of RF cables and build processes preferred
SKILLS
Basic skills in PCB assembly, electrical assembly wiring, and soldering preferred
USG Core Values
The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.
Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.
Equal Employment Opportunity
The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The University is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and University policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.
Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of race, ethnicity, ancestry, color, religion, sex (including pregnancy), sexual orientation, gender identity, gender expression, national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. This prohibition applies to faculty, staff, students, and all other members of the Georgia Tech community, including affiliates, invitees, and guests. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.
More information on these policies can be found here: policymanual/section6/c2714 Board of Regents Policy Manual | University System of Georgia ( ).
Other Information
This is not a supervisory position.
This position does not have any financial responsibilities.
This position will not be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel.
This position does require the ability to obtain and maintain a security clearance.
This position is located in Atlanta, GA
Salary Job Grade A11
Recruiting Range: $ $23.99 to $32.62 based on experience
Background Check
Successful candidate must be able to pass a background check. Please visit employment/pre-employment-screening.
We are seeking a Mechanical Drone Assembler to join our team, working with small drones (3 feet or smaller) designed for military and defense applications. This role requires standing throughout the day and assembling parts and sub-assemblies using small hand tools. You will conduct quality checks to ensure parts are made correctly, following detailed checklists and procedures. This position is bench level production of UAV, payload systems, electrical systems, airframes, and launcher systems.
Responsibilities
- Assemble small drones using hand tools.
- Conduct quality checks on parts to ensure proper assembly.
- Follow detailed checklists and procedures to maintain quality standards.
- Work with small parts, assemblies, and sub-assemblies with tight tolerances.
Essential Skills
- Familiarity with UAV, UAS, drones, and related systems.
- Experience with box builds, RC, MOS codes, and avionics.
- Strong computer skills, including Microsoft Office and ERP systems.
- Ability to work with calipers, micrometers, and understand FOD.
Additional Skills & Qualifications
- Quality certifications such as TS16949, ISO 9001, AS 9100.
- Experience in hydraulic and pneumatic assembly.
- Military experience and familiarity with electrical systems.
- Experience with optical payloads, weapons systems, and APU maintenance.
- Strong understanding of small parts assembly and tight tolerances.
- 2:00 PM
- Monday to Friday PRIMARY FUNCTION: State the primary function or overall purpose of your position.
Reports to the Quality Supervisor or designated authority.
Responsible for performing in-process and/or outbound dimensional and visual inspections of component parts, assemblies, and sub-assemblies as required.
ESSENTIAL FUNCTIONS: List the essential functions (i.e.
key responsibilities with expected end results) which must be accomplished in order to fulfill the purpose of your position as described above.
Inspects (receiving, in-process and outbound) aerospace component parts, sub-assemblies and/or assemblies visually and dimensionally for conformance to manufacturing drawings, quality control specifications and supplier/customer requirements.
Other duties and/or responsibilities may be performed as part of cross-training or employee development plan.
Responsible for review and acceptance of paperwork and documentation used in the acceptance of product.
Responsible to produce necessary manual or computer generated inspection reports to accept or reject products.
Inspection involves using measurement equipment such as, but not limited to, calipers, micrometers, pin gages, thread plugs, thread ring gages, surface plates, and optical comparator.
Completes data processing move transactions as required.
Possesses basic understanding of geometrical tolerancing and dimensional measurements per ASME Y14.5.
Possesses in-depth knowledge of AQL sampling selection per internal procedures or ANSI/ASQC Z1.4 or as directed by customers.
Possesses minimum of five years of experience in first article inspection reports per AS9102.
Possesses in-depth knowledge of acceptance test procedures (ATP), acceptance test reports (ATR), job travelers (process plans), pick lists, drawings, procedures, C of Cs, chemical & physical analysis reports, and test reports.
Experience working in FAA environment.
In-depth knowledge of DFAR and Nadcap requirements.
Basic knowledge of customers DQCR/DSQR programs and website portals.
Evaluates and adheres to all flowed down contractual (internal and external) requirements of customer purchase orders, suppliers purchase orders for commercial and/or military products.
BASIC QUALIFICATIONS: High school diploma or General Education Degree (GED).
Five years minimum related experience or training; or equivalent combination of education and experience in mechanical inspection of aerospace products.
Relocation is not offered for this role.
Candidates must reside within a 50 mile distance of the Los Angeles, CA facility (zip code 90039) to be considered.
This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR).
All applicants must be U.S.
persons within the meaning of ITAR.
ITAR defines a U.S.
person as a U.S.
Citizen, U.S.
Permanent Resident (i.e.
'Green Card Holder'), Political Asylee, or Refugee POSITION CRITERIA: Attendance/Punctuality/Dependability
- Is consistently at work and on time; Uses time efficiently; follows instructions; commits to long hours of work when necessary to achieve goals.
Able to work efficiently under fast pace environment.
Quality/Quantity
- Demonstrates accuracy and thoroughness; meets productivity standards; completes work in timely manner Safety and Security
- Follows safety procedures; reports potentially unsafe conditions; uses equipment and materials properly.
Technical Skills
- Pursues training and development opportunities; strives to continuously build knowledge and skills.
Oral Communication Speaks English clearly and listens and gets clarification when needed; participates in meetings.
Written Communication
- Presents numerical data in a legible manner; able to read and interpret written information.
Teamwork
- Treats colleagues, suppliers, internal, and external customers with respect; contributes to building a positive team spirit; supports everyone's efforts to succeed.
Organizational Support Follows all policies and procedures; upholds organizational values.
Must be highly motivated and committed to high quality standards.
Professionalism
- Approaches others in a tactful manner; treats others with respect and consideration; accepts responsibility for own actions.
Language Skills
- Ability to read and interpret documents in English such as safety rules, operating and maintenance instructions, and procedure manuals.
Ability to complete routine documentation.
Ability to speak clearly and effectively with Manager/Supervisor, coworkers, customers, suppliers, etc.
Mathematical Skills
- Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
Reasoning Ability
- Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.
Computer Skills
- Knowledge of Microsoft Office (Excel, Word, Outlook), internet, etc.
PREFERRED QUALIFICATIONS: Knowledge or experience inspecting various types of materials (e.g., aluminum, alloy, titanium, stainless steel, etc.).
Knowledge or experience inspecting aerospace products with coatings (e.g., anodizing, cadmium plating, chromium plating, nickel plating, zinc plating, passivation, etc.).
College or ASQ (American Society for Quality) certification a plus.
Experience working in FAA environment
LocationSmyrna, Georgia
Full/Part TimeFull-Time
Regular/TemporaryRegular
Add to Favorite JobsEmail this Job
About Us
Overview
Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.
About Georgia Tech
Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.
Georgia Tech's Mission and Values
Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:
1. Students are our top priority.
2. We strive for excellence.
3. We thrive on diversity.
4. We celebrate collaboration.
5. We champion innovation.
6. We safeguard freedom of inquiry and expression.
7. We nurture the wellbeing of our community.
8. We act ethically.
9. We are responsible stewards.
Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.
Job Summary
The Electrical Integrator L1 will provide technical support to program managers, project directors, task leads, and senior-level Electrical Integrators. The Electrical Integrator L1 will help with basic troubleshooting, repair, and maintenance of electrical cables, circuits, and assemblies.
This position will interact on a consistent basis with: faculty and staff project/task leaders, technical leads, contractors, and vendors
This position typically will advise and counsel: faculty and staff project/task leaders, technical leads, contractors, and vendors
This position will supervise: N/A
Responsibilities
Job Duty 1 -
Support program managers, project directors, and task leads with basic electrical assembly work such as cable assembly fabrication, and electrical chassis fabrication and assembly
Job Duty 2 -
Assist with basic testing and troubleshooting of circuits and systems
Job Duty 3 -
Assist with kitting parts using a Bill of Materials or other online inventory tools
Job Duty 4 -
Support other work teams, as needed, with skills such as mechanical assembly, welding, metal work, drafting, parts inventory, and technical documentation
Job Duty 5 -
Perform other job-related duties as assigned
Required Qualifications
Educational Requirements
Technical Diploma, Associate's Degree, or two years college course work, or an equivalent combination of education and experience
Required Experience
Up to two years of job-related experience
Preferred Qualifications
Preferred Experience
IPC-610
IPC-620
J-STD-001
IPC-7711
IPC-7721
Experience with inventory control and management of electrical and mechanical components.
Knowledge, Skills, & Abilities
ABILITIES
Experience using crimping tools preferred
KNOWLEDGE
Basic understanding of AC/DC circuits, and familiarity with basic hand tools
SKILLS
Basic skills in PCB assembly, electrical assembly wiring, and soldering preferred
USG Core Values
The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.
Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.
Equal Employment Opportunity
The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.
Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia (USG) and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individuals race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.
Other Information
This is not a supervisory position.
This position does not have any financial responsibilities.
This position will not be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel.
This position does not require security clearance.
This position is located in Atlanta, GA
Salary Job Grade S4
Recruiting Range: $20.01 to $27.22
Background Check
Successful candidate must be able to pass a background check. Please visit employment/pre-employment-screening.
