Arora Engineers Jobs in Usa
2,918 positions found — Page 3
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact our Talent Specialist, Hema, at (63 Title: Test Engineer 1 RandD Location: On-site at San Diego, CA Duration: 6 Months with possibilities of extension and conversion to full-time Hours: 8 AM
- 5 PM, Overtime Travel: 0-5% Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Execute mechanical and measurement tests driven and defined by test engineers across product development and design verification.
Demonstrate strong working knowledge of test equipment and fixtures, including proper configuration, operation, and limitations.
Independently troubleshoot test setups, equipment issues, and execution challenges to ensure reliable and repeatable results.
Provide hands-on input to test method improvement by identifying equipment limitations, setup inefficiencies, and opportunities to improve robustness and repeatability.
Collect, organize, and communicate high-quality test data and execution learnings to engineers to support informed engineering decisions This is a hands-on early career test engineer role focused on executing engineer-defined mechanical testing and improving execution quality through troubleshooting feedback including improvements to the test methods that we currently have.
This role is primarily focused on executing tests.
Testing demonstrates proficiency using test equipment, documenting findings and observations.
Analyzes the data and generates basic reports and graphs, and feeds execution learnings back into the test methods, fixture improvements, and related processes.
Candidates may also support CAD scripting or statistical analysis, but execution quality is the priority.
The most critical skills are strong hands-on execution and proficiency using test equipment.
Hands-on experience as Mechanical Test Engineer and Mechanical aspect Collaboration with multiple teams and stakeholders Where you come in: You will drive the execution of test activities across all phases of product development.
You will collect and document test results using good documentation practices and assist in failure analysis to support root-cause investigations.
You will conduct feasibility testing, developmental testing, characterization testing, material testing, and design verification testing and support all engineering requests from the RandD teams.
You will operate various test equipment, including vernier scales, microscopes, tensile testing machines, multimeters, oscilloscopes, temperature probes, data acquisition systems, drop testing equipment, mechanical shock and vibration equipment, environmental chambers, hardness testers, and fatigue testing machines.
You will support the development of test procedures, equipment/fixture builders, and any documentation that supports testing.
You will support fixture or equipment development for product testing.
Activities include designing and testing equipment or fixtures, processes, and completing engineering studies and validations.
You will assist in lab management, including equipment troubleshooting, safety protocol enforcement, documentation, lab organization, and audit preparation to ensure compliance and efficiency.
What makes you successful: BS or MS in Mechanical, Biomedical, or Chemical Engineering, or equivalent, with 0 2 years of experience.
Experience designing fixtures, tools, or equipment using CAD software (SolidWorks or OnShape preferred).
Proficiency in at least one scripting or high-level programming language (e.g., Python, MATLAB, C, VBA).
Familiarity with statistical analysis, DOE techniques (e.g., Gauge RandR, t-test, ANOVA), and data interpretation.
Hands-on experience with electromechanical test equipment and measurement systems, with strong troubleshooting skills.
Excellent communication skills, both written and verbal, with effective technical writing for protocols and reports.
Highly organized and detail-oriented, with strong time management and prioritization abilities.
Demonstrated initiative, fast learning, and curiosity to explore new tools and methods.
Strong problem-solving skills and ability to adapt in a dynamic testing environment.
Collaborative team player who works effectively across RandD teams and is flexible with work hours when needed.
Critical thinker who adapts quickly, solves problems independently, and thrives in a dynamic testing environment.
Be flexible with work hours and responsive to shifting priorities, including early mornings, late nights, or possible overtime when necessary to support testing schedules, project demands, or urgent operational tasks Experience: 0 2 years of experience Required: Strong hands-on experience with mechanical or measurement test equipment and fixtures, including independent troubleshooting Proficiency with CAD software to review, modify, or create test fixtures and setups (SolidWorks or Onshape, or other 3D CAD tools) Ability to execute engineer-defined test methods and document results accurately in a development or verification environment Preferred Ability to develop test methods end-to-end, including defining objectives, designing setups, selecting equipment, executing tests, and refining methods based on results Experience improving test robustness, repeatability, and efficiency through iterative method refinement Strong technical judgment to translate hands-on testing experience into well-documented, engineer-ready test methods Education: Bachelor's degree required (Not a Master's degree) Interview Process: 2 rounds (Screening and on-site interview) About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
CAD, Solidworks
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
The Boeing Company is looking for a Senior Digital Engineer – Full Stack & Systems Architecture to join our team in Charleston, SC; El Segundo, CA; Huntsville, AL; Mesa, AZ; Oklahoma City, OK, Philadelphia, PA; or Berkeley, MO.
Boeing Test & Evaluation (BT&E) generates enormous volumes of data, but data alone does not create insight. We are building a Digital Engineering capability focused on transforming test intent into reusable knowledge through intuitive applications, scalable systems, and thoughtful architecture.
As a Digital Engineer – Full Stack & Systems Architecture, you will sit at the intersection of engineering workflows, software systems, and cloud platforms. Your mission is to empower BT&E engineers to work differently by designing and delivering digital products that shorten feedback loops, reduce friction, and accelerate learning from every test event.
This is not a traditional backend or data‑engineering role. You will design end‑to‑end solutions, working from initial understanding of engineer needs, to shaping application architecture, to implementing full‑stack solutions that integrate data, automation, and cloud services. You will partner closely with BT&E, BCA, BDS, and Wisk/Autonomy engineers to modernize how test data is accessed, explored, and operationalized across Boeing.
If you enjoy systems thinking, building products engineers actually want to use, and architecting platforms that scale across programs and clouds, this role is for you.
Position Responsibilities:
Digital Product & Application Development
Design and develop full stack applications that improve test and evaluation workflows, decision making, and engineering productivity
Translate ambiguous engineering problems into clear digital solutions, balancing usability, performance, and scalability
Develop front end and backend services using modern frameworks (e.g., React, Node.js, Python, .NET)
Design and implement APIs and service interfaces that enable integration across test systems, analytics platforms, and enterprise tools
Systems Architecture & Cloud Engineering
Architect end to end systems spanning applications, data services, and cloud infrastructure
Evaluate and select cloud services across AWS and Azure based on cost, usability, scalability, and long term maintainability
Implement infrastructure as code using Terraform, CloudFormation, ARM, or Bicep to support repeatable, secure deployments
Design solutions that support multi cloud and hybrid environments as required by program needs
Data Enabled Engineering (as a Platform Capability)
Design data models and storage solutions that support both transactional systems and analytical workloads
Build and integrate data services that allow engineers to discover, explore, and reuse test data efficiently
Collaborate with data scientists and analysts to enable analytics, visualization, and ML workflows without burdening users with infrastructure complexity
DevOps, Reliability & Security
Build CI/CD pipelines to support rapid iteration, testing, and safe deployment of applications
Apply SRE principles to ensure reliability, observability, and operational excellence
Build and maintain observability capabilities—including logs, metrics, and traces—to enable rapid diagnosis, performance optimization, and reliable operation of digital engineering systems
Partner with security and compliance teams to ensure solutions meet Boeing security, data governance, and regulatory requirements
Contribute to operational documentation, runbooks, and continuous improvement efforts
Collaboration & Technical Leadership
Work closely with engineers, product owners, and stakeholders to shape digital roadmaps and technical direction
Influence architecture and design decisions across programs through systems thinking and engineering judgment
Collaborate with peers and contribute to a growing Digital Engineering community within BT&E
Basic Qualifications (Required Skills/Experience):
Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
5+ years of experience developing full stack applications with modern frameworks
Strong systems thinking skills with experience designing end to end software solutions
Proficiency in one or more programming languages (JavaScript/TypeScript, Python, C#, or Go)
Experience deploying and operating applications in cloud environments (Azure and/or AWS)
Hands on experience with infrastructure as code (Terraform, CloudFormation, ARM/Bicep)
Working knowledge of CI/CD pipelines, Git, Docker, and Linux
Experience designing and working with relational databases (e.g., PostgreSQL), including schema design and performance considerations
Familiarity with security best practices (IAM, secrets management, network controls)
Preferred Qualifications (Desired Skills/Experience):
Experience designing developer platforms or internal engineering tools
Background in Digital Engineering, Model Based Systems Engineering (MBSE), or engineering workflow automation
Cloud certifications (AWS and/or Azure)
Experience with Kubernetes, serverless architectures, or event driven systems
Exposure to data pipelines, analytics platforms, or data enabled applications
Experience working in regulated or safety critical environments
Understanding of aerospace, test & evaluation, or large scale engineering programs
Familiarity with ITAR, EAR, DFARS, or similar compliance frameworks
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Conflict of Interest:
Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range: $127,500 – $197,800
Applications for this position will be accepted until Mar. 21, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Power what matters.
Position Summary: The Stationary Engineer plays a critical role in operating, maintaining, and repairing boilers, chillers, HVAC systems, electrical distribution centers, emergency power systems, and other essential mechanical systems that keep the facility running safely and efficiently.
Key Responsibilities: Operate and maintain utility systems providing heat, steam, hot water, humidification, electricity, and more.
Monitor system performance using gauges, meters, and Direct Digital Building Control (DDBC) systems, making adjustments to optimize efficiency and safety.
Perform testing and treatment of boiler and feed water systems.
Keep detailed logs and records of system operations and maintenance activities.
Respond quickly to alarms and service calls, ensuring minimal downtime and prompt resolution.
Maintain equipment in top operating condition through preventive maintenance and repairs.
Supervise and coordinate tasks with other support personnel as needed.
For Navy Hospital assignments: Provide after-hours and weekend support for the hospital's 'trouble desk' and manage additional systems like medical air, medical gases, chillers, and emergency power systems.
Qualifications: Minimum 4 years of experience operating and maintaining power boilers, or completion of a recognized technical or apprenticeship program with at least 3 years of related experience.
Proficiency in automatic boiler controls and Direct Digital Building Control systems (minimum 1 year experience required).
Skilled in water testing and treatment for boiler operations.
Experience with large-scale facility systems preferred (especially in healthcare or government settings).
Fourth Class Power Engineer Certification Program of the National Institute for the Uniform Licensing of Power Engineers, Inc (NIULPE), Third Class Power Plant Operating Engineer Certification Program of the American Society of Power Engineer, Inc.
(ASOPE), or a Grade II Steam Engineer certification from City of Seattle/Tacoma/Spokane, or higher.
Must meet company and government physical and security requirements, including respirator qualification and clearance eligibility.
Valid state-issued driver's license with acceptable driving record.
U.S.
Citizenship required.
Ability to pass government-mandated background checks and drug screenings.
For Naval Hospital assignments: Proof of Rubella immunity and TB test within the past 12 months required prior to employment.
Physical Expectations Lift up to 10 lbs regularly and up to 50 lbs occasionally.
Frequent use of hands/arms and clear communication.
Periodic standing, walking, climbing, kneeling, and crawling.
We provide reasonable accommodations for qualified individuals with disabilities.
Why You'll Love It Here You'll be part of a skilled, supportive team where your expertise truly matters.
Every day brings something new
- and your work keeps people safe, comfortable, and operational.
Ready to power up your career? Apply today and become a vital part of our operations team.
Equal Opportunity Employer
- This job description may change as organizational needs evolve.
Compensation details: 45.74-45.74 PI-3496
Mechanical Design Engineer
$80,000 - $110,000 + Quarterly Bonuses + Progression to Management + PTO + Holiday + Medical + Dental + Vision + Life Insurance + 401K + Other Excellent Benefits.
Langhorne, Pennsylvania (Commutable from Philadelphia, Doylestown, Newton, Hatboro, Levittown, Morrisville, Bristol, Cherry Hill, Princeton, Trenton).
Are you a Mechanical Design Engineer from an Industrial Manufacturing background, ready to take the next step into a high-impact technical leadership role, where you’ll have the autonomy to fully own and drive the mechanical design process?
This is a standout opportunity to establish yourself as the go-to expert for mechanical design, with clear progression into management or senior leadership, in addition to competitive quarterly bonuses and comprehensive training on machinery unique to the business.
Now is the time to join this industry leading organization, at a cutting edge, state-of-the-art manufacturing facility. Renowned for their quality, innovation, and employee development, you’ll play an integral part in continuing their legacy as a market leader, whilst growing your own horizons both personally and professionally.
In this role, your expertise will be instrumental in the design and optimisation of mechanical powertrain systems and components. You will take ownership of designing fabricated weldments and precision-machinery, whilst applying FEA to assess structural, thermal, and vibration performance. You’ll work closely alongside engineers, vendors, and cross-functional teams, to produce manufacturing drawings, support component selection, and deliver solutions that meet performance, reliability and manufacturability targets.
This role would suit a Mechanical Design Engineer with Industrial Manufacturing experience, looking to step-into a high-impact technical leadership role with extensive growth potential and progression towards senior leadership.
The Role:
- Design and optimise large-scale industrial equipment and mechanical powertrain components.
- Perform mechanical system analysis (including FEA) and produce detailed manufacturing drawings.
- Collaborate with engineers, project teams, and vendors to specify components and ensure designs meet manufacturing requirements.
The Candidate:
- Strong mechanical design background with proficiency in 3D CAD (Autodesk Inventor preferred) and Finite Element Analysis.
- Solid understanding of mechanical systems (including pneumatics), ideally with experience in industrial equipment, automation, or robotics.
- Degree qualified (Bachelors).
To apply for this role or to be considered for further roles, please click "Apply Now" or contact Oliver George at Rise Technical Recruitment.
Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles.
The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.
Mechanical Design Engineer, Mechanical Engineer, Design Engineer, Mechanical Design, Design, Mechanics, FEA, Finite Element Analysis, Weldments, Precision Machining, Mechanical Powertrains, Mechanical Components, Autodesk, SolidWorks, CAD, 3D CAD, Engineering, Langhorne, Pennsylvania.
Controls & Integration Engineer III
Location:
Jessup, MD
Job Id:
789
# of Openings:
1
TITLE: CONTROLS & INTEGRATION ENGINEER V
LOCATION: JESSUP, MD
*Salary Negotiable
POSITION SUMMARY:
Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including industrial controls and power controls and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customer's complex needs.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
Design / Engineering
- Initiates design documents for small projects and in support of large programs
- Develops design documents narratives
- Performs requirements analysis
- Develops Sequence of Operations / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Develops Specifications
- Performs QA/QC and technical reviews of designs
- Plans and Design Procedures and Equipment for Integrated Systems Factory Testing
- Comment Resolution
Mechanical-focused controls engineer (BAS/BMS)
- Experience on EPMS monitoring
- Certifications in Platforms (at least one), familiarity with any others preferred: Ignition, Aveva, Automated Logic, Siemens, Schneider EBO, Niagara N4, Iconics Gen64
- Experience with Federal Government controls projects (ICS/EMCS/UMCS) preferred
- Familiarity with Cisco network switch programming and design preferred
Programming
- Lead programming / configuration team efforts for complex automation and SCADA applications.
- Program / Configure / troubleshoot PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Author testing / commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field Testing
Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
Estimates
- Conducts any surveys, inspections, tours, etc. of client sites, as required
- Prepares cost estimates and supporting documents for small projects
- Perform hardware / software upgrades and replacements on existing systems
- Evaluation and pricing of change orders
Personnel Management
- Assigns technical tasks and coordinates with entry-level engineers
- Assigns tasks and coordinates with Technical Staff
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Experience in reading electrical and control schematics and plans
- Experience in control system startup, configuration, and calibration
- Experience in testing and troubleshooting control systems
- Experience using basic electrical and machinist hand tools
- Experience using testing, calibration, or industry-specific tools and software
- 3-7 years' experience
- Bachelor's degree in engineering or higher
- Associate degree (add 3 years)
- High school diploma (add 5 years)
- Must be a US Citizen
Computer Skills:
- Experience in computer networks
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software
- Standard Office Software (Microsoft Word, Excel, etc.)
Certificates and Licenses:
* Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
- Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
* Preferred Licenses / Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
- Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
- Design Build Institute of America (DBIA)
- Engineer in Training (EIT) in relevant in field
Supervisory Responsibilities:
* No supervisory responsibilities
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
CPG Participates in E-Verify
Learn more about CPG by checking out our website here
#LI-TG1
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
The Boeing Company is looking for a Senior Digital Engineer – Full Stack & Systems Architecture to join our team in Charleston, SC; El Segundo, CA; Huntsville, AL; Mesa, AZ; Oklahoma City, OK, Philadelphia, PA; or Berkeley, MO.
Boeing Test & Evaluation (BT&E) generates enormous volumes of data, but data alone does not create insight. We are building a Digital Engineering capability focused on transforming test intent into reusable knowledge through intuitive applications, scalable systems, and thoughtful architecture.
As a Digital Engineer – Full Stack & Systems Architecture, you will sit at the intersection of engineering workflows, software systems, and cloud platforms. Your mission is to empower BT&E engineers to work differently by designing and delivering digital products that shorten feedback loops, reduce friction, and accelerate learning from every test event.
This is not a traditional backend or data‐engineering role. You will design end‐to‐end solutions, working from initial understanding of engineer needs, to shaping application architecture, to implementing full‐stack solutions that integrate data, automation, and cloud services. You will partner closely with BT&E, BCA, BDS, and Wisk/Autonomy engineers to modernize how test data is accessed, explored, and operationalized across Boeing.
If you enjoy systems thinking, building products engineers actually want to use, and architecting platforms that scale across programs and clouds, this role is for you.
Position Responsibilities:
Digital Product & Application Development
- Design and develop full stack applications that improve test and evaluation workflows, decision making, and engineering productivity
- Translate ambiguous engineering problems into clear digital solutions, balancing usability, performance, and scalability
- Develop front end and backend services using modern frameworks (e.g., React, Node.js, Python, .NET)
- Design and implement APIs and service interfaces that enable integration across test systems, analytics platforms, and enterprise tools
Systems Architecture & Cloud Engineering
- Architect end to end systems spanning applications, data services, and cloud infrastructure
- Evaluate and select cloud services across AWS and Azure based on cost, usability, scalability, and long term maintainability
- Implement infrastructure as code using Terraform, CloudFormation, ARM, or Bicep to support repeatable, secure deployments
- Design solutions that support multi cloud and hybrid environments as required by program needs
Data Enabled Engineering (as a Platform Capability)
- Design data models and storage solutions that support both transactional systems and analytical workloads
- Build and integrate data services that allow engineers to discover, explore, and reuse test data efficiently
- Collaborate with data scientists and analysts to enable analytics, visualization, and ML workflows without burdening users with infrastructure complexity
DevOps, Reliability & Security
- Build CI/CD pipelines to support rapid iteration, testing, and safe deployment of applications
- Apply SRE principles to ensure reliability, observability, and operational excellence
- Build and maintain observability capabilities—including logs, metrics, and traces—to enable rapid diagnosis, performance optimization, and reliable operation of digital engineering systems
- Partner with security and compliance teams to ensure solutions meet Boeing security, data governance, and regulatory requirements
- Contribute to operational documentation, runbooks, and continuous improvement efforts
Collaboration & Technical Leadership
- Work closely with engineers, product owners, and stakeholders to shape digital roadmaps and technical direction
- Influence architecture and design decisions across programs through systems thinking and engineering judgment
- Collaborate with peers and contribute to a growing Digital Engineering community within BT&E
Basic Qualifications (Required Skills/Experience):
- Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
- 5+ years of experience developing full stack applications with modern frameworks
- Strong systems thinking skills with experience designing end to end software solutions
- Proficiency in one or more programming languages (JavaScript/TypeScript, Python, C#, or Go)
- Experience deploying and operating applications in cloud environments (Azure and/or AWS)
- Hands on experience with infrastructure as code (Terraform, CloudFormation, ARM/Bicep)
- Working knowledge of CI/CD pipelines, Git, Docker, and Linux
- Experience designing and working with relational databases (e.g., PostgreSQL), including schema design and performance considerations
- Familiarity with security best practices (IAM, secrets management, network controls)
Preferred Qualifications (Desired Skills/Experience):
- Experience designing developer platforms or internal engineering tools
- Background in Digital Engineering, Model Based Systems Engineering (MBSE), or engineering workflow automation
- Cloud certifications (AWS and/or Azure)
- Experience with Kubernetes, serverless architectures, or event driven systems
- Exposure to data pipelines, analytics platforms, or data enabled applications
- Experience working in regulated or safety critical environments
- Understanding of aerospace, test & evaluation, or large scale engineering programs
- Familiarity with ITAR, EAR, DFARS, or similar compliance frameworks
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Conflict of Interest:
Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range: $127,500 – $197,800
Applications for this position will be accepted until Mar. 21, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Title: Radio Frequency Engineer
Location: Camarillo - 5141A Verdugo Way (T828), CA
CLEARANCE TYPE: Secret
BILL RATE MAX: $65-%67/Hr. W2
Responsibilities:
• Follow USMC supplied operational scenarios, architecture framework (DoDAF), and RF performance requirements for developing a new system's RF design.
• Review the development of new system requirements (decomposed from the USMC operational requirements) in regards to RF performance.
• Assist with RF component requirement specifications, as needed.
• Research and recommend appropriate COTS or vendor developed RF components (transceivers, antennas, amplifiers, analog filters, switches, couplers, splitters, cables, etc.) for a new system based on RF performance requirements; size, weight, and power (SWAP) constraints; aircraft space limitations; existing aircraft antenna locations; etc.
• Review vendor simulations of candidate antenna performance based on aircraft location and anticipated operational use. Support senior RF engineers with the down select of the best candidate antennas for the system under development.
• Assist senior RF engineers with building an RF spread bench to test a new system's candidate RF components. Evaluate candidate COTS and vendor developed RF system components using the RF spread bench. Summarize test results.
• Support the chamber testing of a new system and/or its prototype.
• Assist with the generation and documentation of new systems' RF block diagrams.
• Assist the senior RF engineers with the development and evaluation of a new system's RF switching hardware (RF Circuit Card Assemblies (CCA's)).
• Support the down select of system RF components.
• Assist with the generation and maintenance of RF component Acceptance Test Procedures (ATPs). Conduct ATPs on RF components.
• Assist with the troubleshooting of RF system issues.
• Assist the senior RF engineers with ensuring system compliance with MIL-STD-461 (EMI) and MIL-STD-464 (EMC).
• Assist with system RF chamber testing.
• Collated required system RF data to enable an outside Navy competency to perform HERO, HERF, and HERP analyses.
• Investigate RF system safety concerns/issues.
• Assist a co-located Navy competency with RF threat technique evaluation, as needed.
• Support the use of key processes, such as the configuration management for RF system changes after the system baseline is established.
• Support test's evaluation of system RF performance in the lab and during flight test.
• Support the senior RF engineers with program sponsor data calls for RF technical data.
Basic Qualifications for RF Engineer:
• 2 years with bachelor's in science; 1 Years with Masters; 0 years with PhD
US citizen with a Secret clearance
• Experience with RF systems
• Strong verbal and written communication skills and the ability to work well in a close team environment
• NOT a teleworking position. Work in a Navy development facility.
Preferred Qualifications for RF Engineer:
• Top Secret clearance
• Experience with RF component selection, RF system development, and RF test equipment
• Experience mitigating co-site RF interference
• Experience using mechanical and electrical drawings
• Knowledge of Electromagnetic Warfare principles
• Familiarity with aircraft RF safety
• Familiarity with Agile Development Methodology
• Familiarity with Atlassian software development and collaboration tool set (Jira, Confluence)
• Experience integrating RF systems with military aircraft
• Familiarity with referenced military standards
THIS ROLE IS FULLY ON-SITE FROM MONDAY-FRIDAY 8AM-5PM).
Position Overview The Product Development Engineer I plays a key role in supporting new product development and commercialization efforts.
This role focuses on executing engineering assignments that deliver innovative, functional, and cost-effective solutions in a collaborative, team-based environment.
You will be responsible for the tactical execution of product development deliverables while ensuring compliance with quality systems, design control processes, and engineering best practices.
Product Development Engineer Compensation The pay for this position is $35.00/hr Benefits are available to full-time employees after 90 days of employment Product Development Engineer Highlights This position is a contract assignment with potential to hire on permanently based upon attendance, performance, and business needs The required availability for this position is Monday-Friday 8am-5pm (On-Site) Product Development Engineer Responsibilities · Support development of new products by applying engineering fundamentals · Assist with installation and qualification of R&D equipment · Perform data analysis and generate technical reports · Support procurement of materials, equipment, and testing consumables · Develop and validate test methods (e.g., Gage R&R) · Ensure compliance with Design Control processes throughout the product lifecycle · Create and maintain Design History Files (DHF) and risk management documentation (DFMEA) · Support development of Device Master Record (DMR) documentation · Conduct engineering testing (performance, reliability, usability) · Participate in design reviews, root cause analysis, and failure investigations · Assist in technology transfer and process validation for new product introductions · Ensure compliance with quality, safety, and regulatory requirements Product Development Engineer Requirements Bachelor’s degree in Engineering (Mechanical or Biomedical preferred) 1–2 years of experience in product engineering and/or pharmaceutical development Experience working in FDA-regulated environments (21 CFR 211, 21 CFR 820, ISO 13485) Strong problem-solving and analytical skills Ability to manage multiple priorities in a fast-paced environment Excellent written and verbal communication skills Proficiency in statistical analysis (capability analysis, DoE, acceptance sampling) Experience with technical writing Preferred Skills Familiarity with FDA regulations for medical devices and combination products Experience with root cause analysis tools (5 Whys, Ishikawa) Experience with statistical software (e.g., Minitab, Excel) Process improvement certification (e.g., Lean Six Sigma Green Belt) Ability to anticipate risks and drive solutions proactively Strong interpersonal and teamwork skills If you think this Product Development Engineer position is a good fit for you, please reach out to me—feel free to call, e-mail, or apply to this posting!
Description: Professional Municipal Engineer (P.E.) Location: Reno, Nevada Position Overview : J-U-B ENGINEERS, Inc.
is seeking to hire a Professional Municipal Engineer (P.E.) to work in our successful Reno, Nevada office.
Our purpose at J-U-B ENGINEERS, Inc.
(J-U-B) is “Helping Each Other Create Better Communities.” We foster a supportive and team-oriented environment to solve problems that improve society – while providing employees growth opportunities and an expansive benefits package.
We attract and retain the best people because we provide an enriching environment for our employees to build their careers in the communities where they live while using their talents in a team environment.
J-U-B offers a clearly defined career path, and a sense of belonging.
It is one of the largest professional engineering companies in the Intermountain West, with over 20 offices across seven states.
There are ample opportunities to collaborate with other offices on projects, widening your experience and network.
The ideal candidate has a solid foundational understanding of planning and design relating to municipal & site development civil infrastructure such as wastewater collection, water distribution, stormwater plans, specifications and estimates.
Additionally, experience producing civic and institutional (public facility) development plans.
Works well in a collaborative, problem-solving team environment.
The ideal candidate will also have a desire to and experience in developing and maintaining relationships with clients, promoting our team’s experience, and finding and securing project contracts with clients.
While applying technical civil engineering knowledge and skills, this engineering position will: Provide engineering design and project management services for municipal engineering including sewer, water, storm water, and other municipal services within Washoe County and the surrounding region.
Provide engineering design and project management services for Civic, institutional, and other public facility developments (Site, Grading, Utility plans, specifications, estimates and construction administration) within Washoe County and the surrounding region.
Develop relationships with and secure project work and service contracts with clients.
Manage clients and client projects while providing responsive communications, professional services, and delivering quality projects to multiple clients.
Participate in all phases of project development, design, and construction.
Analyze engineering data, interpret plans and specifications, and make sound decisions to solve challenges.
Collaborate with other engineers, planners, and public agencies on projects.
Collaborate with engineers and planners for reports, design, and construction phase services for various private and public agency projects.
Coordination and support of projects on multi-disciplinary projects throughout the company.
Requirements: Bachelor’s degree (B.S.) in Civil Engineering.
Certification as Professional Engineer (P.E.).
6-10 years of qualified experience.
General Civil, Municipal & Development engineering background.
Excellent communication and writing skills.
Willingness to build a practice and mentor junior staff.
Proven technical background and skillset.
Salary Range: $95,000-$120,000/year, determined by experience Benefits : In addition to your competitive salary, J-U-B also offers an extensive benefits package including: Professional development opportunities Bonuses for qualified employees Generous vacation and sick leave package Medical, dental, vision, life, and disability insurance Parental Leave 401(k) with company match, profit sharing Company paid Short Term and Long-Term Disability plans The ability to work in a team-centered, collaborative, and supportive atmosphere J-U-B is an employee-owned firm and offers ownership opportunities after qualified years of service The application window will be open through April 2nd, 2026.
Applications will be reviewed frequently, and interviews may be scheduled throughout the posting period.
See our website for more benefit details: To apply for this position and learn more about J-U-B, please visit Compensation details: 95 Yearly Salary PIe95e2 2
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Join Boeing, a leader in aerospace innovation, as a Senior Mission Systems Architecture & Analysis Engineer within the Phantom Works Division located in Berkeley, MO.
Phantom Works programs develop complex, highly integrated, advanced systems, enabling future growth for Boeing and our customers.We need innovative technical leaders like you to help shape the future of military aviation by developing and integrating next generation Mission Systems capabilities as part of a very exciting and critically important new platform development effort (specific details of this program cannot be disclosed in this forum).
You will find yourself as a technical leader on a team developing next generation Mission Systems architectures, requirements, interface, & behaviors utilizing Model-Based Systems Engineering, and Open Architectures. You will have the opportunity to collaborate across multiple disciplines using Agile development methodologies.
Given the importance of this effort, this opportunity will propel your career into broader scopes of technical or managerial leadership - depending on where your interests lie.
If you are ready to take on a technical leadership role in a dynamic team environment, we invite you to apply and help shape the future of aerospace technology.
Position Responsibilities:
Lead engineers & perform development of Model Based Systems Engineering (MBSE) requirements, behaviors, and interfaces along with required traceability.
Develop solutions that meet Open Mission Systems Architecture requirements
Plan and execute tasking in accordance with program rolling wave/agile development approach
Advise, Assist, & Check as Technical Lead Engineer (TLE) of assigned engineers
Collaborate with customers to ensure needs, requirements, and commitments are being met
Present to both internal and external stakeholders with requisite level of detail for the audience
Support analyses to ensure it is driving toward improving needed architecture or requirements definition
Support cross-Boeing program mission systems interchanges for maximum leverage and re-use
We work in a casual but professional environment with multi-disciplined teams of engineers that take pride in developing, integrating, testing and delivering innovative solutions. There is opportunity for further career growth into technical leadership or management positions and we value the curiosity, tenacity, and imagination our engineers bring to our teams each day.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position requiresan active U.S. Secret Security Clearance.
Basic Qualifications: (Required Skills/Experience)
Currently possess a Bachelor's, Master's or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry
Experience in development of Mission Systems
Excellent communication and interpersonal skills
Experience in technical leadership
Preferred Qualifications: (Desired Skills/Experience)
Experience developing requirements and applicable traceability from the weapon system down to subsystems
Experience working in MSOSA, or similar Model Based Systems Engineering tools
Experience in avionics, Open Architecture, and/or electronics systems development
Experience with technical leadership of engineers
Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.
Typical Education/Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), computer science, engineering data science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications. In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Relocation:
This position offers relocation based on candidate eligibility.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of
benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range: $129,200 – $174,800
Work Shift:
First Shift
Travel:
Some travel could be required for this position, but it will not be significant (
