Arch Linux Installation Guide For Beginners Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:  

• This position is for a variety of shifts  

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

• Installation includes mounting wiring connecting testing configuring and programming instruments and devices.
• Maintenance includes routine calibration and functional testing of process instruments and devices documentation of calibration data collected during inspections utilizing the instrument inspection monitoring system verification of data communication systems that provide real time process and alarm information to the facility control center.
• Troubleshooting includes the utilization of equipment such as a laptop computer multi-meter instrument/device communicator device software documenting process calibrator etc.
• Develops and maintains interactive work relationships to accurately and effectively complete job responsibilities.
• Directs advises instructs inspects supports and/or assists contractors and employees in the design construction operation and maintenance of assets.
• Ensures regulatory and compliance standards are met.

• Two-year or higher degree in electronics engineering or related field AND a minimum of one year direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR
• A minimum of four years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems.

• Two-year or higher degree in electronics engineering or related field AND a minimum of three years direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR
• A minimum of seven years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems.
• Ability to lead project teams, assume project supervisor role and develop action plans.
• Knowledge of Natural Gas and Electric Driven Gas Compressors.
• Knowledge of Gas and Fire Detection Systems
• Knowledge of Emergency Shut Down (ESD) Systems.

• Ability to interpret control system software for the purpose of diagnostic troubleshooting.
• Ability to pass electrical, electronic, and digital equipment troubleshooting tests.
• Ability to troubleshoot electrical, electronic, and pneumatic equipment.
• Ability to interpret installation specifications, wiring schematics, instrument drawings and component diagrams.
• Ability to define specifications and requisition instrumentation and control equipment.
• Ability to define problems, collect data and draw conclusions.
• Ability to work independently and as a team member.
• Ability to communicate effectively and develop rapport.
• Ability to operate diagnostic equipment (multimeter, calibrator, oscilloscope, etc.)
• Ability to operate personal computer.
• Knowledge of reciprocating and turbine engines, gas dehydration, measurement, environmental motoring, compression and supporting systems
• Knowledge of electric driven compressors may be required.
• Knowledge of electrical and electronic theory and principles
• Knowledge of Measurement devices (Press, Flow, Temperature, Moisture, Vibration, Speed, Density, Level) and ability to calibrate the same.
• Knowledge of Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS)
• Knowledge of Variable Frequency Drives (VFD)
• Knowledge of Human Machine Interface (HMI)
• Knowledge of Ethernet Communications Equipment
• Knowledge of Valves and Positioners
• Knowledge of National Electric Code and National Bureau of Standards Transmitter calibration and tolerance standards
• Knowledge of applicable regulatory requirements

• Knowledge of electronic, radio, digital, and remote-control theory.
• Knowledge of applicable regulations and standards (FCC, FAA, AGA, API, NEC.)
• Ability to carry equipment and parts (50 - 100 pounds) from vehicle to work site, possibly over rough terrain.
• Ability to interpret installation manuals, technical instructions, wiring, diagrams, and blueprints.
• Ability to prepare technical reports and repair and maintenance records.
• Ability to install, test, maintains and repairs equipment (electronic gas measurement telemetering microwave radio satellite equipment chromatographs etc.) to facilitate effective telecommunication gas measurement and remote-control operations.
• Ability to directs and participates in installation of telecommunications equipment.
• Ability to interpret and implement gas measurement and SCADA device installation specifications.
• Ability to performs design programming installation and operation of electronic gas measurement and control systems.
• Inspects and tests facilities and equipment to identify malfunctions.
• Troubleshoots problems replaces equipment/components and repairs calibrates and maintains equipment.
• Ensures installations and equipment comply with regulations.
• Ability to supervise MC&C projects.
• Ability to maintains interactive work relationship with Gas Measurement personnel Specialists and Engineers to accurately and effectively complete job responsibilities

• Associate (Typically two years of related, progressive work experience would be needed for candidates applying for this position who do not possess an associate degree.)

• Electronics & Communications Engineering

• ISA Certification (Required: within one year of ISA eligibility, not to exceed 15 months)

• Contribute to a team-centric work environment based on mutual respect and integrity
• Support the Company's CHAMPION culture, which centers around personal responsibility, continuous improvement and delivering quality for our customers

Compensation details: 32.26-46.39

PIa35bdf77f43e-37344-40004115

About Georgia Tech

Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values

Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:

1. Students are our top priority.

2. We strive for excellence.

3. We thrive on diversity.

4. We celebrate collaboration.

5. We champion innovation.

6. We safeguard freedom of inquiry and expression.

7. We nurture the wellbeing of our community.

8. We act ethically.

9. We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

About the Georgia Tech Library

The Georgia Tech Library is a member of the University System of Georgia library consortia, Atlanta Regional Council for Higher Education (ARCHE), the Association of Research Libraries (ARL), and the Association of Southeastern Research Libraries (ASERL), and the Association for College and Research Libraries (ACRL). The Georgia Tech Library has a unique and progressive service model that relies heavily on technology and electronic formats. Electronic resources account for 79% of our overall content, 98% of the Library's content expenditures and 99% of our content usage and most of our print collections are held in a high-density, climate-controlled storage facility in collaboration with Emory University Libraries. The GT Library works to fulfill the mission and vision of Georgia Tech and is committed to supporting the Institute's new Strategic Plan. The leadership orchestrates our efforts to ensure and maintain a positive, diverse, equitable and inclusive work environment where everyone can thrive.

The Library () at the Georgia Institute of Technology in Atlanta, Georgia is seeking a collaborative and knowledgeable librarian to lead and manage digital accessibility services to further support the Library's ongoing commitment to ensure that all Library resources and digital assets can be used by all members of the Georgia Tech community, regardless of ability. The Title II and Digital Access Librarian works collaboratively across the library to ensure a unified strategy for proactive and remediated digital resource accessibility, including Course Reserves, Interlibrary Loan, Digital Repository, and other Library digital interfaces. Reporting to the Head of Technical Services this position will serve as the Service Owner for the Library's Title II and Accessibility initiatives including coordinating digital accessibility remediation, working with vendors and campus partners, and participating in strategic decision-making as a core member of various internal and external committees. The Title II and Digital Access Librarian will provide expert advice regarding digital accessibility to inform and support the Georgia Tech Library's vision of innovating services, tools, and access to all for an inclusive future.

This is a 12-month faculty position with an effort distribution of 80% excellence in assigned duties, 10% scholarship, and 10% professional service to the library profession. Up to two (2) years credit for previous professional experience may be given at the time of employment, in which case such credit will be stated in the offer letter. The Georgia Tech Library Faculty may enjoy flexible work schedules, professional development, and a healthy work-life balance.

This is not a remote position, but some teleworking hours is supported.

Responsibilities

Provide and improve library services and resources; enrich the research, learning, and scholarship of the Georgia Tech community through the following:

80% Librarianship

• Lead and manage the Library's Title II Digital Access Service that includes the coordination and prioritization of requests, compliance, and vendor relationships related to digital accessibility and Title II.
• Hire, train, supervise, and evaluate student employees.
• Advise Library Leadership, Library colleagues, students, faculty, and staff and other GT Units on Digital Access best practices and compliance.
• Lead projects and initiatives to improve upon and educate users and stakeholders on digital accessibility and participate in the Library's portfolio and project management processes as appropriate.
• Collaborate with Technical Services Librarians and staff, other colleagues, and stakeholders to ensure a unified strategy for resource acquisition, discovery, delivery, and access of scholarly resources.
• Collaborate with all Library Departments to ensure a unified and compliant digital portfolio.
• Monitor current trends and best practices in digital accessibility and recommend improvements to local policies, practices, and workflows.
• Contributes to Course Reserves and Interlibrary Loan service operations, working alongside colleagues and participating in day-to-day workflows as needed.
• Serve as an ex officio member of the Content Management Group and share expertise in digital accessibility.
• Serve as a core member of the Alma-Primo Advisory Group.
• Participate in collaborative discussions with local, state, and national efforts including, but not limited to, GALILEO, NERL, and ASERL.
• Conduct regular digital accessibility assessments of workflows, platforms, and operations to implement new projects or improve services to better serve users.
• Create and maintain documentation on policies and procedures to ensure consistent practices.
• Other duties as assigned.

10% Scholarship and Creative Endeavors

• According to expectations for library faculty members, contribute professionally through research, scholarship, and creative activities.

10% Service to the Library, Institute, and LIS Profession

• Foster positive relations with faculty, students, and staff and promote the Institute and Library's commitment to the Georgia Tech values.
• Serve on library and university committees as assigned.
• Contribute to the profession through service to professional organizations at the local, state, regional, and national levels, as appropriate.

This position vacancy will be filled at the rank of Librarian II, Librarian III, or Librarian IV. The final job offer will be dependent on candidate qualifications in alignment with Non-tenure Track Academic Faculty ranks as outlined in section 3.2.2 of the Georgia Tech Faculty Handbook faculty-handbook/3.2.2-non-tenure-track-academic-faculty-members-hiring-and-promotion-guidelines.

Librarian II

• Appointment to this rank requires an appropriate terminal degree, typically an American Library Association (ALA) - accredited master's degree, a degree in a subject related to archival work, and/or in the appropriate area of specialization.
• Evidence of scholarship and/or evidence of service to the librarian profession.
• 5 years of professional experience.

Librarian III

• Appointment to this rank requires an appropriate terminal degree, typically an American Library Association (ALA) - accredited master's degree, a degree in a subject related to archival work, and/or in the appropriate area of specialization.
• A strong record of scholarship and service demonstrating significant contributions to the librarian/archivist profession.
• 10 years of professional experience.

Librarian IV

• Appointment to this rank requires an appropriate terminal degree, typically an American Library Association (ALA) - accredited master's degree, a degree in a subject related to archival work, and/or in the appropriate area of specialization.
• A strong record of scholarship and service demonstrating the highest standards of professional contributions to the librarian profession and are recognized widely by peers.
• 15 years of professional experience.

• 2 years of experience working with digital accessibility practices, standards, and/or services.
• Knowledge of current vendors, trends, best practices, and issues related to digital accessibility in academic libraries.
• Certification in CPACC, ADS, or better from the IAAP; or digital/information accessibility certification from an accredited program.
• Experience using Ex Libris Alma, Primo, Leganto, Rapido and/or Atlas ILLiad products
• Experience with programming or scripting languages like Python for task automation or metadata manipulation.
• Experience using assistive technologies to manually validate the accessibility of remediated content.
• Experience working with library vendors.
• Demonstrated ability to manage user demand, compliance requirements, and administrative responsibilities while balancing competing priorities in a high-volume service environment.
• Demonstrated ability to provide responsive, high-quality user services.
• Solid record of working collaboratively as well as independently.
• Demonstrated experience with project management, including planning, communication, and assessment.
• Excellent oral, written, and interpersonal communication skills.
• Experience working with Spring Share products, such as Lib Guides.

This is a benefits-eligible position with a minimum starting salary of $75,322. Rank and salary commensurate with education and experience.

Applicants must submit a letter of interest, CV, and the names and contact information for at least three references.

Application materials should be submitted as .PDF files.

For additional information about this appointment, please contact Martin Patrick, Head of Technical Services, at .

The University System of Georgia is comprised of our 25 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia ("USG") and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individual's race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

This is not a supervisory position.
This position does not have any financial responsibilities.
This position will not be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel
This position does not require security clearance.

Successful candidate must be able to pass a background check. Please visit employment/pre-employment-screening

Miller International is seeking a skilled, dependable Property Maintenance Technician to ensure optimal functionality, safety, and appearance of our company-owned and leased properties. This role is responsible for conducting thorough inspections, performing necessary repairs and maintenance, and installing equipment and appliances to support daily operations.

The ideal candidate is hands-on, detail-oriented, safety-focused, and takes pride in maintaining a well-functioning and professional environment.

At Miller International, our employees enjoy a fun, casual, laid-back atmosphere. If you have maintenance experience and are looking for an opportunity to contribute to a dynamic and growing organization, we’d love to hear from you.

Salary: $25 - $30 Per Hour

• Minimal weekend work (rarely required)
• On-call responsibilities are rare
• Company-provided work truck for travel between properties

As a Property Maintenance Technician, you would be responsible for:

• Conducting regular inspections of buildings, grounds, and equipment to identify maintenance needs and potential issues
• Perform repairs and maintenance tasks promptly and efficiently, including plumbing, electrical systems, HVAC, and general building maintenance
• Install new equipment and appliances, ensuring proper functionality and compliance with safety standards
• Adhere to local and state building codes and regulations in all maintenance and repair activities
• Comply with all company safety regulations and utilize proper safety equipment and practices
• Maintain accurate records of maintenance activities, repairs, and equipment installations
• Respond promptly to emergency maintenance requests that may impact safety or property operations
• Communicate effectively with property management regarding maintenance needs and completed work
• Perform landscaping and grounds maintenance tasks as needed to maintain curb appeal and overall property appearance
• Other duties may be assigned

Requirements:

• High school diploma or equivalent required; vocational training or certification in property maintenance preferred
• Proven experience as a Property Maintenance Technician or similar role
• Working knowledge of plumbing, electrical systems, HVAC, and general building maintenance
• Familiarity with local and state building codes and regulations
• Strong troubleshooting and problem-solving skills
• Ability to safely and effectively use hand and power tools
• Ability to lift up to 50 pounds and perform physically demanding tasks
• Strong communication and interpersonal skills
• Experience with equipment installation preferred

Interested Yet?

Miller International offers competitive pay, a comprehensive benefits package, and a supportive, team-oriented work environment. We value work-life balance and strive to create a workplace where employees feel respected and appreciated.

We offer a comprehensive benefits package that includes:

• Health, dental, and vision coverage for employees and their families
• Retirement savings plan with company match
• Paid time off, including vacation and sick leave
• Employee wellness and assistance programs
• Optional supplemental benefits, such as life, disability, and other voluntary coverage
• Educational support programs, including tuition reimbursement and student debt assistance

Our success is built on the shoulders of our dedicated and loyal staff – and we only employ the best! We pride ourselves on a rich history spanning over 100 years, one that embodies the traditions of hard work, distinction, and providing unsurpassed quality products to our customers. Since 1918, Miller International has matured and consistently evolved to become what it is today: One of the most successful privately owned Companies in the Western Industry, whose brands continue to gain impressive popularity and growth. We do it by treating each other with respect, and we do it all as a team that feels more like a family. At Miller, we are guided by our Core Values and use them to measure the appropriateness of our decisions, whether with vendors, customers, or employees. The Core Values were created and approved by our employees as a commitment to being part of a company guided by these principles.

If you’re ready to bring your skills to a company that values craftsmanship, teamwork, and long-term growth, we encourage you to apply.

We can’t wait to hear from you!

Check us out at: Deadline: 4/9/2026

Facilities and Business Operations:

The Facilities and Business Operations at UCF is dedicated to fostering a conducive educational environment for our faculty, staff, students, and the broader community. We are committed to excellence, providing unparalleled expertise, and maintaining a world-class standard in service.

Please visit us at: or Facebook and Instagram: UCF Facilities

The Opportunity:

The Facilities Operations Landscape department within Facilities and Business Operations is looking for a Landscaper II to join their team! This will be a member of the Landscape Operations Projects team responsible for skilled installation and renovation of campus landscapes.

Responsibilities:

• 
  

• Support the Landscape Operations Projects Team by assisting with planning, coordinating, and executing landscape installation projects across campus.

  
  

• Perform site preparation and install, transplant, or remove trees, shrubs, groundcover, and other landscape materials.

  
  

• Assist the Hardscape Team with concrete removal and repairs, paver walkway work, pothole patching, and other small hardscape projects.

  
  

• Provide support to the Urban Forestry team, including pruning, tree removals, stump grinding, and related tasks.

  
  

• Remove, repair, and install site furnishings such as benches, trash receptacles, and other outdoor fixtures.

  
  

• Coordinate project handoffs by identifying maintenance needs and providing sitespecific recommendations to maintenance crews.

  
  

• Operate landscape and construction equipment safely and effectively as needed for project work.

  
  

• Perform other duties as assigned in support of landscape operations.

  
  

Minimum Qualifications:

Completion of 9th grade and 2+ years of relevant experience or an equivalent combinationof education and experience pursuant to Fla. Stat. 112.219(6).

Preferred Qualifications:

• 
  

• 3+ years of landscape experience in a commercial or corporate environment, including installation, renovation, or multiphase outdoor project work.

  
  

• Experience operating equipment such as skid steers, stump grinders, chainsaws, compactors, trenchers, or similar tools.

  
  

• Familiarity with identifying plant materials and understanding proper planting techniques.

  
  

• Knowledge of hardscape practices, including concrete repair, paver installation, or sitefurnishing installation.

  
  

• Experience assisting with tree work (urban forestry), such as pruning, removals, or stump grinding.

  
  

• Ability to work in extreme environments and collaborate with individuals from various backgrounds and experiences.

  
  

The most successful candidates may possess the following qualities:

• 
  

• Knowledge of proper maintenance of equipment: Cleaning, preserving finishes, checking fluid levels, and lubricating.

  
  

• Basic computer skills, including email.

  
  

• Basic communication skills in English in order to: Work effectively with customers; Operate and demonstrate the functions of the electronic equipment; Utilize telecommunication devices.

  
  

Health Assessment Required:

The UCF policy requires completion and passing of a physical exam for this position.

Special Instructions to the Applicants:

New hires selected for this position at the University of Central Florida can expect to be offered the base salary amount for the role. Compensation is determined in alignment with UCF's pay structure and internal equity considerations.

Position requires a valid Class E driver's license. This position may involve driving to various locations on and off campus to conduct University business.

Applicant must be authorized to work for any U.S. employer, as sponsorship is not available for this position now or in the future.

Are you ready to unleash YOUR potential?

As a next-generation public research university and Forbes-ranked top employer in Florida, we are a community of thinkers, doers, creators, innovators, healers, and leaders striving to create broader prosperity and help shape a better future. No matter what your role is, when you join Knight Nation, you'll play an integral role at one of the most impactful universities in the country. You'll be met with opportunities to connect and collaborate with talented faculty, staff, and students across 12 colleges and multiple campuses, engaging in impactful work that makes a positive difference. Your time at UCF will provide you with many meaningful opportunities to grow, you'll work alongside talented colleagues on complex projects that will challenge you and help you gain new skills, and you'll have countless rewarding experiences that go well beyond a paycheck.

Working at UCF has its perks!UCF offers:

• 
  

• Benefit packages, including Medical, Dental, Vision, Life Insurance, Flexible Spending, and Employee Assistance Program

  
  

• Paid time off, including annual and sick time off and paid holidays

  
  

• Retirement savings options

  
  

• Employee discounts, including tickets to many Orlando attractions

  
  

• Education assistance

  
  

• And more...For more benefits information, view the UCF Employee Benefits Guide.

  
  

Dive into our Total Rewards Calculator to discover the diverse selection available to you, giving you a glimpse into the benefits that together shape your comprehensive rewards package at UCF.

Unless explicitly stated on the job posting, it is UCF's expectation that an employee of UCF will reside in Florida as of the date the employment begins.

Department

Work Schedule

Type of Appointment

Expected Salary

Job Posting End Date

Veteran's Preference:

Preference will be given to eligible veterans and their eligible spouses in accordance with Chapter 295 of the Florida Statutes. Applicants claiming preference are responsible for providing required documentation by the closing date of the position. For more information on Veterans' Preference, please visit

As a Florida public university, the University of Central Florida makes all application materials and selection procedures available to the public upon request.

UCF is proud to be a smoke-free campus and an E-Verify employer.

If an accommodation due to a disability is needed to apply for this position, please call or email .

For general application or posting questions, please email .

Pyramid Systems is seeking an Cloud Logging Engineer (Splunk & AWS) who is responsible for ensuring the availability, performance, and security.

• Advise on cost efficiency for future usage and cost optimization for current infrastructure.
• Automate the management and enforcement of policies.
• Create and maintain documentation related to architecture and operational processes for CLS (Centralized Logging Solution).
• Develop a set of best practices and architecture patterns.
• Help maintain regulatory compliance of the CLS (Centralized Logging Solution) infrastructure.
• Help monitor and maintain CLS performance, availability, and capacity.
• Help maintain application container images.
• Offer solutions for ingestion of logs to Splunk via cloud native solutions.
• Maintain all infrastructure as code.
• Provide operations monitoring of CLS platform to enable proactive issue identification, response, and resolution.
• Recommend and execute improvements to the existing CLS architecture and design with growth and scalability in mind to optimize performance, stability, reliability, and agility.
• Responsible for reporting on current infrastructure status, and planning for future usage.
• Responsible for Beats agent deployments and container infrastructure analysis, optimization, and capacity planning.
• Maintain CI/CD pipelines for configuration deployments to applications.
• Support large-scale deployments with data feeds from multiple on premise and cloud data centers.
• Upgrade, install, configure monitoring solution for AWS for Windows and Linux servers.
• Utilize automation tool such as Terraform, Ansible, AWS Cloud Formation, Azure Resource Manager, or similar.
• Participate in a rotating on call schedule and weekly off hours maintenance.

• Splunk certification required***
• Candidate background eligibility requirements are United States citizen or be a Permanent Resident and have lived in the United States for at least 3 years, clean criminal background and able to obtain a Public Trust (High-Risk) Position.

• Bachelor's degree in computer science, electronics engineering or other engineering or technical discipline OR AWS/Azure Certification (AWS Professional / Specialty Cert. OR Azure Expert / Advanced Cert.) OR 4 years of relevant experience in one of the VAECOT suite of tools (Science Logic, Dynatrace, Turbot, AppDynamics)

• Minimum of three (3) years of experience in leading technical teams to achieve objectives and outcomes.

• Minimum of six (6) years setting up, configuring, and using AWS cloud operational tools to ensure service level agreements and performance targets are met, and continued compliance with policies, standards and guidelines.

• Minimum of three (3) years specific to monitoring Centralized Logging Solution (CLS)/Splunk

• Subject matter expertise with ALL VAEC Cloud Service Providers which currently includes Microsoft Azure and Amazon Web Services (AWS).

• Experience with programming with Splunk language (SPL) or equivalent (e.g., Python, Powershell, AWS or Azure CLI).

• One or more of these Splunk certifications: Splunk Core Certified Power User, Splunk Core Certified Advanced Power User, Splunk Enterprise Certified Admin, Splunk Enterprise Certified Architect, Splunk Enterprise Security Certified Admin, Splunk IT Service Intelligence Certified Admin.

• Knowledge of enterprise logging, with a focus on security event logging.

• Solid understanding of cloud concepts, either using Azure or AWS semantics.

• Experience in one or more of the VAECOT suite of tools, shown below:

VAEC Operational Tools (VAECOT)

Some experience in one or more of the following tools:

Third party tools

* Application Performance Monitoring: Dynatrace, AppDynamics

* Cloud Security: Nessus, NetSkope, Enterprise Security External Change Council, Identity and Assessment Management, Continuous Monitoring as a Service, McAfee, eMASS, Centrify

* Cloud Governance: Turbot

* DevOps/Configuration Management/Help Desk: Ansible, Service Desk, ScienceLogic, ServiceNow, SPLUNK, Jira ServiceDesk, Cloudockit, GitHub

* Containerization: Red Hat OpenShift

* Migration: CloudKey, Version One

* Reporting: Apptio

Cloud Service Provider (CSP) Operational Tools Tools/Services

* AWS Security: System Manager (Explorer and OpsCenter), CloudWatch, Config, CloudTrail, Elasticsearch (Kinesis DataStreams), GuardDuty, Inspector, Key Management Service (KMS), Security Hub, Directory Service, Identity and Access Management, Resource Access Manager, Cognito, Secrets Manager, Certificate Manager, Artifact

* Aws Monitoring and Logging: QuickSight, Eventbridge (AWS Kinesis DataStreams), Simple Notification Service (SMS), Elasticsearch (AWS Kinesis DataStreams), CloudTrail, CloudWatch

* Aws Networking: Virtual Private Cloud (VPC), Route S3, API Gateway, Direct Connect, AppStream 2.0, Transit Gateway, Elastic Loadbalancer, Firewall Manager, WAF & Shield

* AWS Storage: Cloud Tiering Services to S3 from On-Prem, Simple Storage Services (S3), S3 Glacier, Storage Gateway, Elastic File System (EFS), Backup

* Azure Security: Monitor (Log Analytics and ASC), Event Hubs, Security Center (ASC), Information Protection (AIP) , Key Vault, PowerBI, Network Watcher (Performance Monitor), Monitor (Log Analytics and ASC)

* Azure Monitoring and Logging: Information Protection (AIP), Advance Threat Protection, Security Center (ASC), Information Protection (AIP), Key Vault, Active Directory, Role Based Access Control (RBAC), Resource Manager (ARM), Resource Graph (ARG), Active Directory B2C, Key Vault, App Service, Service Trust Portal

* Azure Networking: Virtual Network, Traffic Manager, DNS, Application Gateway, Express Route, Web Apps, FrontDoor, VPN Gateway, Loadbalancer, Firewall

* Azure Storage: NetApp File Service, Storage (Blobs, Disks, Files, Queues, Tables), Storage Archive Access Tier, StorSimple, Files, Backup

Build a Career That Matters with One of the World's Most Respected Employers!

- - - - - - - - - - - -

This opportunity is in Woodburn, Indiana in our BF Goodrich Tire Plant. Woodburn is a small town located about 30 mins east of Fort Wayne, IN. Fort Wayne is the cultural and economic center of northeastern Indiana and the second largest city in Indiana. Established in 1961, our plant makes passenger and light truck tires.

THE OPPORTUNITY

This engineer will be responsible for completing the Mechanical Engineering portion of projects in support of the Plant Capital execution, as well as Plant Technical support, enabling the plant to meet its Safey, Market, Productivity, and Quality goals. They will assist project teams with pre-studies of deployment and development projects in the M.E. field. They will also complete design studies, follow procurement and fabrication of equipment and lead the installation, commissioning and startup of the equipment in an industrial plant environment. For customer projects, manages the design studies for industrial equipment installations that are necessary for the success of the Plant's capital projects. She / he will ensure adherence to the customer's specifications, local regulations, compliance of performance, and costs.

WHAT YOU WILL DO

• Conduct feasibility studies of functional specifications; evaluate solutions against the criteria of cost, landmarks, risks, and functionality.
• Adhere to the quality system and established methods (risk analyses, FMEA, design reviews, quality planning, treatment of non-Conformities, etc.).
• Acquire validation of key project milestones during the installation, start-up and ramp-up of the equipment in collaboration with team members.
• Facilitate procurement, acceptance inspections, and maintain "as built" drawing packages for assigned material and equipment projects.
• Create budget estimates and bid packages on assigned projects.
• Provide project documentation: mechanical designs, technical offer, safety risk assessment, maintenance & operator training documents and user manuals.
• Lead mechanical contractors or maintenance installation teams during equipment modifications & machine installations through start-up and commissioning.

• Providing project support, especially during installation, start-up and ramp up phases, is often "on-site" and "hands on", and many projects include implementation schedules during holidays and shutdowns.
• Actively support the plant with designed solutions to improve Production, Quality, Maintainability, and Safety metrics.
• Design tooling for a critical part of the machines that make our high-quality products.

WHAT YOU WILL BRING

• Strong leadership, communication, organizational, customer service skills, and ability to work in a collaborative team environment.
• Self-motivation with a high degree of integrity and able to perform job duties with minimal direction on a timely basis.
• Experience with mechanical design standards; OSHA, ASME, ANSI, ISO, etc.
• Proven knowledge of SOLIDWORKS, AutoCAD, Microsoft office, Power BI.
• Bachelor of Science in Mechanical Engineering degree (ABET Accredited) with at least 3+ years of manufacturing and/or machine design experience.
• Project Management experience preferred
• Engineering document management experience, Siemens Team center or similar
• Experience with mechanics of materials, stress analysis and FEA is preferred
• Knowledge of pneumatics, hydraulics, piping and fittings
• Experience with lifting devices, cranes, jibs, below the hook devices & end-effectors
• Knowledge of sizing and selection of motors, reducers and servos
• Knowledge of advanced technologies, AGV, robotics, ASRS, AI and machine learning

#LI-RM1

#LI-HIRINGMICHELIN

Ready to Shape the Future of Innovation?

Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.

The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.

Why Michelin?

• Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.

• Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Connected Communities.

• Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.

• Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.

Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .

This position is not available for immigration sponsorship.

We build the future with people like you. Begin your career with Michelin today!