Amphenol Tpc Wire Cable Jobs in Usa

Electrical Maintenance Mechanic ***$5000 Hiring Bonus***

Position specifics:

Location: Charter Wire – 7850 N. 81st Street, Milwaukee, WI 53222

Shift: 10:00 PM – 6:00 AM, Sunday night - Friday morning

Why Work Here:

SCHEDULE: Get a dependable 8-hour first shift, Monday–Friday, with occasional overtime.

BENEFITS: Access great benefits like medical, dental, vision, 401(k) match, and paid time off.

GROWTH: Expand your skills with on-the-job training, process improvement opportunities, and internal advancement—we promote from within.

SAFETY: Work in an environment committed to safety and continuous improvement.

STABILITY: Join an established Midwest company with four generations of family ownership.

What You’ll Do:

As an Electromechanical Technician, you’ll play a critical role in maintaining, troubleshooting, and repairing production machinery. You'll work with both mechanical and electrical systems across high-speed stamping presses, cold forming machines, and automated equipment in a dynamic production environment.

• Maintain and troubleshoot electromechanical equipment using hand tools, welding equipment, and measuring devices

• Perform preventive maintenance to reduce downtime and ensure equipment reliability

• Diagnose and resolve issues using technical documents such as blueprints, schematics, and manuals

• Collaborate with cross-functional teams to support continuous improvement

• Follow safety protocols and use appropriate PPE

• Support process improvements and participate in ongoing training

What You’ll Need:

• 5+ years of industrial maintenance experience or technical degree in a related field or journeyman’s card.

• Proficiency in reading complex electrical schematics and code books

• Broad knowledge of electrical codes, electronic controls, and electrical theory

• Experience with line setups, inspections, and electrical testing equipment

• Strong math skills (fractions, percentages)

Nice to Haves:

• Experience with PLCs and drives (Allen Bradley, Siemens)

• Familiarity with AC/DC motors, HVAC, and hydraulic/pneumatic systems

• Experience with welding/torch equipment and precision measuring tools

• Excellent communication and teamwork skills

• Problem-solving mindset and eagerness to keep learning

Physical Requirements:

• Frequent standing and walking

• Occasional sitting, reaching, forceful motion, and lifting up to 60 lbs

• Minimal climbing and lifting over 100 lbs

• Ability to meet physical demands with or without reasonable accommodation

Ready to put your mechanical and electrical expertise to work? Apply today and grow your career with Charter Wire.

We offer comprehensive health, dental, and vision benefits, along with a 401(k) plan that includes employer matching and profit sharing. Additionally, we offer company-paid life insurance, disability coverage, and paid time off (PTO).

Industrial Engineer (Entry Level)

Location: Conroe, TX

Company: National Wire LLC

Position Summary

National Wire LLC is seeking a highly motivated Industrial Engineer (Entry Level) to help build, standardize, and improve our manufacturing processes. This role is designed for someone who wants to be on the production floor — where the work happens — not behind a desk.

You will work directly with supervisors, operators, maintenance, and leadership to implement Lean tools, improve flow, reduce waste, and strengthen operational discipline. This is a high-impact role with strong visibility to senior leadership.

Industrial Engineering or Chemical Engineering background preferred.

Key Responsibilities

• Spend the majority of time on the production floor analyzing processes

• Conduct time studies and develop standard work

• Identify waste and implement Lean tools (5S, Kaizen, Visual Management, Standard Work, Value Stream Mapping)

• Support layout improvements and workflow optimization

• Assist in improving material flow and inventory accuracy

• Develop KPIs for production efficiency and labor productivity

• Work with supervisors to improve process adherence and accountability

• Support root cause analysis for quality and downtime issues

• Help document and standardize procedures

• Participate in continuous improvement projects

Qualifications

• Bachelor’s degree in Industrial Engineering or Chemical Engineering (preferred)

• 0–3 years of experience (internships in manufacturing are a plus)

• Strong analytical and problem-solving skills

• Comfortable working in a fast-paced industrial environment

• Strong communication skills

• Self-driven and willing to challenge the status quo

• Proficient in Excel; ERP exposure is a plus

What We Are Looking For

• Someone who prefers steel-toe boots over a cubicle

• Curious and hands-on

• Comfortable challenging operators and supervisors respectfully

• Driven to improve processes, not just analyze them

• High ownership mentality

⸻

Why This Role Matters

This position will directly impact productivity, cost per ton, waste reduction, and operational discipline across the plant. The right candidate will help shape how we operate as we scale.

Job Location:

Sacramento, CA 95834.

About the Job:

Title of the Position: Automation Technician

The Automation Technician ensures reliable operation of sterile pharmaceutical manufacturing systems by installing, maintaining, calibrating, and troubleshooting automation components, process instrumentation, drives, motors, control devices, clean utility systems, and aseptic production equipment. The role supports continuous and compliant operations under cGMP, FDA 21 CFR Part 11, and cleanroom standards.

Responsibilities:

• Install, maintain, calibrate, and troubleshoot sensors and transmitters for pressure, temperature, flow, level, pH, conductivity, and environmental monitoring.
• Support in performing GMP‑compliant calibrations with complete traceability and accurate documentation.
• Install, maintain, and troubleshoot motors, pumps, fans, drives, control devices, and sterile manufacturing equipment.
• Perform conduit bending, cable routing, wire pulling, cable termination, tray installation, and equipment connections in accordance with plant procedures.
• Install and modify control panels, junction boxes, and instrumentation assemblies.
• Diagnose issues in circuits, protection components, sensors, actuators, drives, and automated machines.
• Use diagnostic tools such as multimeters, clamp meters, insulation testers, and calibration instruments.
• Support PLC, HMI, SCADA, BMS, and EMS platforms, including troubleshooting and system checks.
• Conduct loop checks, functional tests, FAT/SAT, commissioning, and support validation activities (IQ/OQ/PQ).
• Maintain and troubleshoot systems for PW, WFI, Clean Steam, CIP/SIP, HVAC/HEPA controls, and aseptic filling/packaging operations.
• Read and interpret P&IDs, wiring diagrams, schematics, ladder logic, and loop drawings.
• Maintain cleanroom support systems, including differential pressure controls, HEPA filtration, and environmental monitoring.
• Ensure compliance with cGMP, cleanroom classification requirements, FDA 21 CFR Part 11, and data integrity principles.
• Perform preventive, corrective, and predictive maintenance.
• Conduct root‑cause analysis and implement CAPA actions.
• Maintain accurate CMMS entries, calibration logs, and audit‑ready documentation.

Working Condition:

• Ability to work rotating, weekend, or extended shifts.
• Exposure to high‑noise areas (PPE provided).
• Frequent work on mezzanine floors, elevated platforms, ladders, and step‑ups.
• Work inside aseptic cleanrooms and controlled environments (ISO 5/7/8) wearing full gowning.
• Exposure to hot, cold, humid, or pressurized utility systems such as PW, WFI, Clean Steam, and HVAC units.
• Occasional work in tight spaces, behind panels, or equipment enclosures.
• Regular use of PPE, including sterile gowning, gloves, and eye protection.
• Ability to lift to 50 lbs and perform hands-on tasks for extended periods.

Qualifications:

Education:

• BE – Mechanical/Chemical from a reputed University

Experience: Minimum 5 to 10 years of professional experience in the field of pharmaceutical or manufacturing industry.

Knowledge, Skills, and Abilities: Functional:

• Strong troubleshooting skills across sensors, transmitters, motors, drives, actuators, control components, automated machinery, and process systems.
• Experience with conduit bending, tray installation, cable pulling, wire routing, cable dressing, and termination.
• Proficiency in installing and modifying panels, junction boxes, and equipment assemblies.
• Skilled in using multimeters, clamp meters, insulation testers, and calibration devices.
• Ability to install, connect, and terminate control wiring and instrument cabling for field devices.
• Understanding of circuits, drives, starters, protection components, actuators, and control system diagnostics.
• Ability to read and interpret P&IDs, schematics, wiring diagrams, ladder logic, and loop documentation.
• Knowledge of GMP requirements, sterile manufacturing, cleanroom practices, aseptic operations, and validation processes.
• Strong documentation discipline, attention to detail, and audit readiness.
• Ability to work efficiently and safely in regulated manufacturing environments.

Behavioral:

• Result oriented
• Innovative thinking
• Time Management, Professional Work Conduct at all times
• Problem-solving ability & High level of self-motivation
• Strong interpersonal relationship skills
• Strong written & verbal communication skills

Requirements:

• Valid driver's license and acceptable driving record
• Legally authorized to be employed in the United States
• Must live or be willing to move to the Sacramento Metropolitan Region (Approx 40 miles' radius)

Benefits:

• Competitive Salary: $80,000 - $90,000
• Yearly bonus eligibility
• Benefits: offers a wide variety of benefits and programs to support health and well-being, including medical, dental, and vision coverage
• Paid time off plan
• 401k savings plan

About Diversified:

Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back.

What to Expect:

At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you.

As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion.

IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED.

How You'll Contribute:

The AV Installation and Support Services Technician is responsible for the installation, termination, testing, troubleshooting, and maintenance of low-voltage cabling systems, including voice, data, and video.

Assigned to Client and works full time from onsite location responsible for Installation and then maintaining the system after installation. Will conduct Preventive Maintenance and will assist with Service Tickets as needed. Will work with REMOTE support to troubleshoot Service Tickets as required.

This role ensures all work complies with industry standards and client requirements, with a focus on quality, safety, and efficiency. Technician will work onsite and will be responsible for preventive maintenance of the systems and will work with remote service technicians to address service tickets as needed.

What You'll Do:

• 
  
  
• Install, terminate, and test copper and fiber optic cabling for voice, data, and video systems.
  
  
• Interpret blueprints, floor plans, and wiring diagrams to determine cabling requirements and optimal routing.
  
  
• Perform troubleshooting and repairs on structured cabling systems and related hardware.
  
  
• Ensure all installations comply with relevant standards.
  
  
• Document all work performed, including test results and as-built drawings using BlueBeam.
  
  
• Collaborate with project managers, engineers, and other trades to ensure successful project completion.
  
  
• Maintain tools, equipment, and a safe, organized work environment.
  
  
• Provide technical support and guidance as needed.
  
  
• Participate in ongoing training to stay current with industry best practices and standards.
  
  
• Oversee all on-site activity on the active project job site and address any issues necessary to achieve quality and timeline standards
  
  
• Oversee all field operations and report progress, status and issues.
  
  
• Supervises the physical installation of a wide variety of technology into a wide variety of locations
  
  
• Maintains all quality control on jobsite, checking all work from subcontractors and union trades. Managing any discrepancies in our standards
  
  
• Able to read and understand functional design drawings and cable riser diagrams
  
  
• Able to complete assignments in accordance with or better than established task durations as well as estimate task durations to meet assigned deadlines. Provides daily feedback to Manager
  
  
• Able to build and wire custom panels from engineering drawings
  
  
• Advanced Fiber optic cable handling, installation termination and testing
  
  
• Responsible for tracking and maintaining toolkits, job material boxes, company vehicles and materials inventories. Keep clean, orderly and well documented
  
  
• Responsible for tracking and maintaining their personal licenses, certifications and qualifications. (Some states have specific requirements in this area)
  
  
• Maintain daily record of time worked on specific projects for timesheet entry. Maintain an activity log and a personnel log for skills to report on recommended improvements.
  
  
• Conduct routine Preventative Maintenance and logs as required.
  
  
• Work with Remote support for service tickets that require escalation.
  
  

Complexity:

This level of technician will be responsible for performing tasks on clients' jobsites with no supervision. This position is responsible for the coordination with clients, contractors and subcontractors. This position will be the key and only field technician in many situations and will be responsible for delegating work, working with remote support, and communicating with key stakeholders on behalf of the company. Requires maintaining quality control on all field work. This position requires the highest level of technical and people skills along with great communication skills.

Decision Making Authority:

This position is often alone on the job sites and requires making good judgement about decisions that need to be made. In general, the service manager, project manager and supervisor are available to answer questions, but this position is very independent and will be looked upon to make many onsite decisions on behalf of the service manager and company. This position requires good diplomacy in working with our clients and other key stakeholders on the job sites.

Physical Working Environment:

• 
  
  
• Work is performed in commercial, industrial, and construction environments.
  
  
• May require working in confined spaces, on ladders, lifts, or at heights.
  
  
• Must be able to lift and carry up to 50 lbs.
  
  
• Exposure to varying weather conditions and construction site hazards.
  
  

Physical Demands:

The physical demands described here are representative of those that may be met by an employee. The employee may be exposed to construction site conditions on a regular basis.

Employee will be responsible for their safety while on job sites and comply with all safety regulations in place by the client and Diversified. Use of PPE could be required on job sites. The employee can typically spend at least 60% of their time on their feet and be required to be mobile around the client site. The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 50 pounds in construction areas.

The individual is regularly required to use keyboards, test equipment and controls required for installation projects. Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision. When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc.

Travel:

Travel by car and occasional airplane trips are required. Employee must possess a valid driver's license in their state of residence. Employee must possess a valid Passport for entry onto client site. Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Occasional travel by airplane for out-of-town projects is required.

Safety:

Maintain and wear appropriate PPE as the job and tasks require it.

Ensure hazards are addressed and rectified in a timely manner.

What You'll Bring:

Education & Certifications:

• 
  
  
• High school diploma or equivalent required.
  
  

• 
  
  
• Must possess the E06 Limited Energy Systems License
  
  

• 
  
  
• OSHA 30 Certificate required
  
  
• Must have a valid US Passport.
  
  
• Must have a valid driver's license and adhere to our insurance requirements
  
  

Required Skills/Qualifications:

• 
  
  
• Minimum 2 years of experience in low-voltage or structured cabling installation.
  
  
• Possess advanced AV installation skills
  
  
• Familiarity with a wide range of audio, video and networking equipment
  
  
• Proficient in the use of cable testers, hand tools, and power tools.
  
  
• Ability to read and interpret technical documents and blueprints.
  
  
• Must have knowledge of the following programs: Teams, Outlook, Excel, OneNote, BlueBeam/Adobe Reader
  
  
• Willingness to travel to job sites as required.
  
  
• Excellent troubleshooting and problem-solving skills.
  
  
• Strong communication and teamwork abilities.
  
  
• Good verbal communication skills and good customer service skills
  
  
• Ability to diagnose, troubleshoot and resolve technical problems
  
  
• Able to work indoors/outdoors, standing, sitting and ladder use. Able to lift 50lbs.
  
  

Preferred Skills/Qualifications:

• 
  
  
• Experience with Service Now preferred.
  
  
• Experience with Software House preferred.
  
  

• 
  
  
• AVIXA CTS Certification is preferred.
  
  

• 
  
  
• AVIXA CTS-I Certification is highly encouraged
  
  

• 
  
  
• Installer (Level 1 or 2), Technician, or equivalent structured cabling certification preferred.
  
  
• Additional certifications from recognized structured cabling governing bodies are a plus.
  
  

Other relevant certifications may be required or preferred based on the technology focus of the position

What We Offer:

Along with competitive compensation, you will be eligible for the following benefits:

• 
  
  
• Multiple medical plan options to suit your family's needs
  
  
• Dental (including orthodontic coverage) and vision plans
  
  
• Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP)
  
  
• Healthcare and Dependent Care Flexible Spending Accounts (FSA)
  
  
• 401k with Employer Match
  
  
• Paid Time Off and Paid Holidays
  
  
• Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services
  
  
• Commuter Benefits
  
  
• And much more
  
  

To learn more about becoming part of the Diversified team, visit us at our career siteor email us at .

Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered.

If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you.

Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

Position summary:

Install, maintain, and repair electrical systems, apparatus, and electrical equipment, wiring and fixtures, and electronic components of industrial machinery and equipment following electrical code, manuals, schematic diagrams, blueprints, and other specifications, using hand tools, power tools, and electrical and electronic test equipment.

Tasks:

• Install power supply wiring and conduit for newly installed machines and equipment following electrical code and blueprints, using hand tools and voltage tester.
• Install ground leads and connect power cables and wires to machines and equipment, following manuals, schematic diagrams, blueprints, using hand tools and test equipment.
• Diagnoses malfunctioning apparatus, such as transformers, motors, and fixtures using test equipment.
• Repair or replace faulty electric components, wiring, equipment, and fixtures, using hand tools and power tools.
• Test malfunctioning or broken equipment using test equipment, and discuss malfunction with other workers to diagnose malfunction.
• Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
• Place conduit, pipes or tubing, inside designated partitions, walls, structures or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
• Connect wires to circuit breakers, transformers, or other components.
• Install ground leads and connect power cables to equipment, such as motors.

Skills:

• Installation - Installing equipment, machines, wiring, or programs to meet specifications.
• Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
• Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
• Troubleshooting - Determining causes of operating errors and deciding what to do about it.
• Equipment Selection - Determining the kind of tools and equipment needed to do a job.
• Repairing - Repairing machines or systems using the needed tools.

Attributes:

• Follow the rules of safe conduct at all times.
• Demonstrate ability to effectively utilize materials/resources in cost-effective manner.
• Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
• Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
• Oral Comprehension - The ability to listen to and understand information and ideas presented through spoken words and sentences.
• Information Ordering - The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
• Arm-Hand Steadiness - The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
• Manual Dexterity - The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.

Knowledge Requirements:

• Post-Secondary Certificate desirable- awarded for training completed after high school. Minimum 5 years in craft, including helper and apprentice roles. Minimum 2 years as journeyman working in industrial environment
• READING: The employee must have the ability to read safety requirements, instructions in the correct use and maintenance of shop tools, be able to read and understand methods and procedures that are present on drawings, layout work, and just specifications.
• WRITING: Must have the ability to write simple reports with the correct format using spelling and grammar. (English
• SPEAKING: Must have the ability to speak using correct English with a well modulated voice.
• The minimum math ability usually associated with this classification is the ability to calculate surface areas, translate these figures into a bill of material which can be used to complete a specific job. Employees must be able to use variable and formulas which are normally found in most industry approved trade hand books. Also, employees must be familiar with the O.S.H.A. requirements for the type work that is being performed.

The employee must understand that the reporting system used for problems and information is as follows: 1) Crewleader, 2) Foreman, 3) General Foreman, and 4) Superintendent.

Physical Requirements:

• Positions require working in: climbing, bending, sitting, walking, kneeling, crawling, standing, lifting, pushing, and pulling.
• Good hand eye balance and the ability to distinguish colors are required in order to use the tools that are necessary to perform the required work.
• Employees must have vision which has good depth perception in order to judge distance and space relationships.
• The employee must be able to work in all types of weather conditions.
• The ability to work in elevated positions is a must.
• The employee must be able to work in confined spaces as well as wear the following safety equipment when need be: life vests, ear protection, rubber gloves, leather gloves, hard hat, slicker suit, acid suit, rubber gloves, full face breathing mask, wearing full safety harness, or wearing a face shield.
• The heavy work will require the employee to exert up to 100 pounds of force occasionally: The medium work will require the exerting of 50 pounds of frequently: The remainder of the work should require the exertion of 20 pounds of force to constantly move an object.

Other Requirements:

The employee must have a telephone. The employee is expected to work overtime in order to maintain the plant in a safe and productive state. The employee is expected to make call outs when such work is available and the employee’s services are needed.

The employee must have a valid Texas Driver’s License and have permission prior to operating any TIG vehicle. The requirements for operating a company vehicle are as follows: In the past three (3) years the employee can have had only 4 moving violations, no more than 2 chargeable accidents, and no D.W.I.

NOTICE: THIS JOB DESCRIPTION IN NO WAY STATES OR IMPLIES THAT THESE ARE THE ONLY DUTIES TO BE PREFORMED BY THIS EMPLOYEE. HE OR SHE WILL BE REQUIRED TO FOLLOW ANY OTHER INSTRUCTIONS AND TO PERFORM ANY OTHER DUTIES REQUESTED BY HIS OR HER SUPERVISOR.

Job Type: Full-time

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

As a Industrial Maintenance Electrician you will be a vital part of our manufacturing team installing, maintaining electrical equipment. Operate, install electrical systems and preform functional of building and plant equipment.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities:

• Operate, install electrical systems and perform functional testing of building and plant equipment (e.g., machines, motor controls, room re-models)

• Determine if system should be shut down or work must be performed with power source on

• Lock out, tag out, try out equipment and related systems

• Perform primary and secondary testing on electrical breakers during routine maintenance; replace, update and retro fit breakers

• Perform routine tests on high voltage switches and relays, using hi-potential test equipment (Hipot), replace switch or relay

• Troubleshoot electric motors using appropriate test equipment

• Monitor current, voltage, amperage, frequency and watts hours at sub-stations using online computing system

• Check and service electrical systems, using infrared analysis sheets to locate hot spots in service panel

• Service and maintain electrical systems on various types of overhead cranes

• Operate, install electrical systems and perform functional test of building and plant equipment (e.g., machines, motor controls, room re-models)

• Install and perform routine maintenance on all types of lighting fixtures (e.g., fluorescent, halide, standard); clean and check sockets, and replace ballast and bulbs

• Run high voltage electrical cable from sub-station to unit station; cut and splice cable, test cable for resistance

• Install, replace and repair fiber optic cable for computers and computing systems

• Bend conduit and install junction boxes; pull wire of various gauge and color through conduit using a fish tape; install and connect switches and outlets

• Check work after completion or after each operation; ensure job is per drawing and WAC, NEC codes; evaluate job for work to be performed (e.g., wire size, electrical load, conduit)

• Operate mechanical lifts of various types (e.g. tiger lift, spider lift, snorkel lift), to access work areas

• Install wire, crimp, terminate, and solder using tools (e.g., crimpers, wire cutters, soldering gun) in plant electrical systems

• Establish/verify voltage, amperage, frequency and watts using test equipment (e.g., circuit trackers, sonic circuit chasers, volt, amperage meters)

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 3+ years of experience as an Electrician or Apprentice.

• 1+ years of experience maintaining industrial equipment.

• Experience working from heights and using fall protection equipment with weight limitations .

• Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.

• Must be able to complete fall protection training.

Preferred Qualifications:

• Electrician license (EL01 &/or EL 07) or an electrical card.

• Crane related experience.

• Experience with prime power.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidate must live in the immediate are or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range: $33.32 per hour – $61.01 per hour

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

• 
  
• Troubleshoots and resolves malfunctions to machine control systems and makes recommendations to improve efficiency or address quality concerns
  
• Experience and proficiency with ladder logic/PLC programming, Siemens experience required
  
• Develops new and modifies existing PLC and/or HMI applications, interfaces, or embedded control systems
  
• Participates in the set-up and commissioning of new systems or the upgrading of current systems
  
• Knowledge of AC and DC circuitry and electrical concepts
  
• Versatile in ladder logic and various PLC programming languages. Working knowledge of field control devices (motors, relays, switches, photoeyes, etc.)
  
• Designs, develops, maintains, and modifies instrumentation and control systems
  
• Start to finish electrical control system hardware design experience (control panel and field wiring)
  
• Competency in Electrical CAD
  
• Ability to work independently as well as in a team environment
  

• 
  
• Working knowledge of power distribution, networks, PLC, HMI, and drive hardware and software
  
• Ability to read and create schematic drawings using AutoCAD software
  
• Must be able to communicate effectively with Operators, Technicians, Management,a nd others
  
• Ability to work independently as well as in a team environment
  
• Must possess a sense of urgency and ownership when working within time constraints
  
• Must have strong computer skills and be proficient in Microsoft Word and Excel
  

• 
  
• Action Oriented
  
• Balances Stakeholders
  
• Collaborates
  
• Customer Focus
  
• Nimble Learning
  
• Plans and Aligns
  

• 
  
• 401k with Matching
  
• Family and Individual Insurance Packages (Health, Life, Dental, and Vision)
  
• Paid Time Off & Paid Holidays
  
• Long & Short-Term Disability
  
• Supplemental Insurance Plans
  
• Employee Assistance Program
  
• Employee Referral Program
  
• Tuition Reimbursement Programs
  
• Advancement & Professional Growth opportunities
  
• Parental Leave
  
• & More
  

A leader in technology and innovation, Southwire Company, LLC is one of North America’s largest wire and cable producers. Southwire and its subsidiaries manufacture building wire and cable, utility products, metal-clad cable, portable and electronic cord products, OEM wire products and engineered products.

Industrial Maintenance Controls Technician

Location: Pleasant Prairie, WI

Compensation: $36 - $39 hour

Shift: Monday – Friday ~ days

Pension plan!!

As an Industrial Maintenance Controls Technician, you will support our manufacturing operations by providing a full range of electronic equipment maintenance with focus on reliability. Ensure sustainable operation of machinery and equipment by completing preventive maintenance requirements on motors, conveyor systems, and other production machinery. The Industrial Maintenance Controls Technician will also be a key member of process improvement and problem-solving teams.

Qualifications and Experience Requirements

• Associates degree or higher required
• PLC experience is required
• Strong Mechanical and Electrical background (up to 480v)
• Hydraulic and pneumatic experience
• Ability to interpret technical drawings, schematics and OEM manuals
• 5 years of industrial manufacturing maintenance experience
• Possesses strong computer skills (Word, Excel, PowerPoint, Outlook, CMMS, etc.)

Industrial Maintenance Controls Technician Job Description

• Troubleshoot equipment malfunctions using logical and systematic methodologies.
• Routine maintenance including but not limited to field fault analysis, calibration of instrumentation using proper test equipment, component replacement, alignment and calibration to specification.
• Troubleshoot and repair various equipment to include electronic, digital equipment and AC/DC motors & controls.
• Fault analysis of hard-wired relay logic, motor control circuits, motor power circuits (single & 3 phase) and common utility/lighting circuits.
• Access and use PLC logic programming to troubleshoot production equipment.
• Replacement of identified failed parts or components.
• Adjust equipment to bring it into operational specifications.
• Recommend process or procedure changes based on observed equipment behavior.
• Testing of electrical systems and continuity of circuits in electrical wiring, using testing devices such as ohmmeters, and voltmeters to ensure proper operation and safety of system.
• Install, examine, replace or repair electrical wiring, receptacles, switch boxes, conduits, lighting fixtures and other electrical components.
• Maintain current and accurate maintenance data to establish historical records and future maintenance requirements.

Benefits We Offer:

• 401k with Matching & Pension Plan (Eligible for Pension after 1,000 Hours Worked)
• Family and Individual Insurance Packages (Health, Life, Dental, and Vision)
• Paid Time Off & Paid Holidays
• Long & Short-Term Disability
• Supplemental Insurance Plans
• Employee Assistance Program
• Employee Referral Program
• Tuition Reimbursement Programs
• Advancement & Professional Growth opportunities
• Parental Leave
• & More

Southwire is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law.

About Diversified:

Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back.

What to Expect:

At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you.

As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion.

IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED.

Job Summary:

The installation technician is responsible for performing a wide variety of installation duties on technology projects for our clients. This position is the key field position for the bulk of the actual work that gets done in our clients buildings. The install tech needs to coordinate with project management, field superintendents and others to fully understand their role on specific projects. They interpret our drawing packages to create the basis of the finished systems. This installation can include displays, projectors, loudspeakers, microphones, equipment racks, etc. Will also provide advice and guidance to Associate Installation Technicians as necessary.

Primary Duties and Responsibilities:

• 
  
  
• Possess all skills from Associate Install Technician and most skills from the Associate Fabrication Technician job descriptions to install components and make modifications on site as necessary to complete the project
  
  
• Physical installation of a wide variety of technology into a wide variety of locations.
  
  
• Execute a wide variety of cabling terminations for all wire and connector types and ability to test completed terminations.
  
  
• Support the preparation of equipment racks for staging of equipment wire lacing including installation of power strips, grounding bars, jack-fields, etc.
  
  
• Able to read and understand functional design drawings as well as cable riser diagrams and all architectural drawings.
  
  
• Able to assist in the mounting of base build equipment such as monitor mounts, ceiling speakers' microphones and projectors.
  
  
• Provide a consistent level of technical performance as well as flexibility in work schedule. This position requires periodic overtime and may require regular overtime for extended periods to meet fabrication deadlines
  
  
• Able to complete assignments in accordance with or better than established task durations as well as estimate task durations to meet assigned deadlines. Provides daily feedback to Project Manager, or Site Superintendent.
  
  
• Able to build and wire custom designs from engineering drawings.
  
  
• Fiber optic cable handling, installation termination and testing.
  
  
• Can print and make minor corrections to cable labels.
  
  
• Maintain an organized work environment specifically orderliness and cleanliness of the shop and jobsites.
  
  
• Responsible for maintaining their toolkit, company vehicles and installation materials inventories. Keeping things clean, orderly and well documented.
  
  
• Responsible for maintaining their personal licenses, certifications and qualifications. (some states have specific requirement in this area)
  
  
• Maintain daily record of time worked on specific projects for timesheet entry and work performed reports
  
  

Complexity:

This level of technician will be responsible for performing tasks on clients job sites with little supervision. On smaller projects this position may be responsible for the coordination with clients, contractors and subcontractors.

Decision Making Authority:

This position is often alone on the job sites and requires making good judgement about decisions that need to be made. In general the project manager and a site supervisor are available to answer questions. This position requires good diplomacy in working with our clients and other key stakeholders on the job sites.

Physical Working Environment:

Physical Demands:

The physical demands described here are representative of those that may be met by an employee. The employee may be exposed to construction site conditions on a regular basis. Employee will be responsible for their safety while on job sites and to comply with all safety regulations in place by the GC. Use of PPE is usually required on job sites. The employee can typically spend at least 60% of their time on their feet and be required to mobile around the construction site. The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 40 pounds in construction areas. The individual is regularly required to use keyboards, test equipment and controls required for SI installation projects. Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision. When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc.

Travel:

Frequent travel by car and occasional airplane trips are required. Employee must possess a valid driver's license in their state of residence. Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Local travel to job sites (within a 2 hour driving distance each way) will make up 70-90% usually but remote travel can be up to 30% of the job at times. 10% remote travel is required on a regular basis.

Job Qualifications:

Education/Certifications:

• 
  
  
• High school or GED equal
  
  
• AVIXA CTS Certification is desired.
  
  
• One or more years as an associate technician and/or fabrication technician or related industry experience.
  
  
• Must have a valid drivers license and adhere to our insurance requirements
  
  
• OSHA 30 Certificate is highly desired.
  
  
• Other relevant certifications may be required or preferred based on the technology focus of the position.
  
  
• Required/Desired Knowledge, Experience and Skills:
  
  
• Familiarity with a wide range of audio, video and networking equipment
  
  
• Knowledgeable of low voltage electrical concepts
  
  
• Possess basic carpentry and/or installation skills
  
  
• Proficient use and safety with power tools
  
  
• Good verbal communication skills and good customer service skills.
  
  
• Ability to diagnose, troubleshoot and resolve technical problems
  
  

What We Offer:

Along with competitive compensation, you will be eligible for the following benefits:

• 
  
  
• Multiple medical plan options to suit your family's needs
  
  
• Dental (including orthodontic coverage) and vision plans
  
  
• Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP)
  
  
• Healthcare and Dependent Care Flexible Spending Accounts (FSA)
  
  
• 401k with Employer Match
  
  
• Paid Time Off and Paid Holidays
  
  
• Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services
  
  
• Commuter Benefits
  
  
• And much more
  
  

To learn more about becoming part of the Diversified team, visit us at our career siteor email us at .

Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered.

If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you.

Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

In our ‘always on’ world, we believe it’s essential to have a genuine connection with the work you do.

RUCKUS Networks is seeking dedicated, forward-thinking, and driven people to join their team as Account Manager, Inside Sales based in Charlotte, NC. ( multiple roles). If you would like to be part of a team dedicated to delivering industry-leading performance through exceptional talent and a culture of innovation and collaboration.

This is an opportunity you won’t want to miss.

How You'll help us connect the world:

Working closely with the RUCKUS field sales teams and field sales management to identify goals that will grow. RUCKUS’s business and position RUCKUS’s solutions for new business to end users through our Ecosystem of partners including Channel Distributors, Installation Business Partners, Consultants, Engineers, and Integrators through telephone sales and scheduled in-field visits.

You Will Make an Impact By:

• Energetically interacting with field sales and our ecosystem partners to discuss project opportunities and be the lead, in many cases, to see the opportunity through to the finish.
• Applying new business/project publications, both hard print and digital, to qualify new business leads and forward them appropriately to the field team or ecosystem
• Using RUCKUS’ internal resources for product expediting, pricing, technical support, etc. in a manner to meet the customer’s expectations.
• Applying CRM to handle their business opportunities and use the same for account planning.
• Being a champion of implementing the RUCKUS Sales Methodology.
• Implementing creative thinking and planning, identifying new fields of play and new opportunities that position RUCKUS as the lead solution of choice.
• Following up on inbound leads that are generated by external lead generation tools
• Implementing call out campaigns and cold calling of outbound clients.
• Overcoming objections of prospective customers.
• Developing sales opportunities by researching and identifying potential opportunities
• Crafting and delivering qualified opportunities.
• Maintaining and growing our database via D365 and SFDC.
• Ensuring follow-up with calls to action, dates complete profile of information, etc.
• Handling inbound calls and converting into sales leads.

Required Qualifications for Consideration:

A completed bachelor’s degree, equivalent military experience, or two years of sales experience.

You Will Excite Us If You:

• Demonstrate strong leadership, interpersonal and communication skills
• Show innovation through unique ideas and propose them to the team
• Willing to travel occasionally to support customer and partner face-to-face meetings
• Have experienced the benefits of data driven, purposeful coaching (via sports, arts, business, or other pursuits)
• Self-motivated and driven to succeed

LOCAL CANDIDATES ONLY. THIS OPPORTUNITY IS NOT BUDGETED FOR IMMIGRATION/ RELOCATION.

Perks & Benefits

The candidate will receive a comprehensive benefits package, including paid vacation, medical, dental, and visionplans, life, and accidental death insurance, and participation in the Company’s Sales Incentive Plan. Salary range is $69,000.00-$103,000.00

Important Candidate Notice: On January 9, 2026, CommScope finalized the sale of its Connectivity and Cable Solutions segment, which included the CommScope name and brand, to Amphenol Corporation. The remaining businesses — Access Networks Solutions(now rebranded as Aurora Networks) and RUCKUS Networks have been unified under the new parent company, renamed as Vistance Networks. The role being advertised is part of RUCKUS Networks.

Why Join Us?

Vistance Networks shapes the future of communications technology, pushing past what is possible. We deliver solutions that bring reliability and performance to a world always in motion. Our global team of innovators and employees are trusted advisors who listen to customers first, then deliver value.

RUCKUS Networks delivers purpose-driven enterprise networks that enable superior business outcomes in demanding environments. Our solutions combine AI-powered automation, proactive network assurance, and context-aware security, providing exceptional performance with simplified management.

If you want to grow your career alongside bright, passionate, and caring people who strive to create what's next…..come connect to your future at Vistance Networks.

Vistance Networks is an Equal Opportunity Employer (EEO), including people with disabilities and veterans.

In our 'always on' world, we believe it's essential to have a genuine connection with the work you do.

Aurora Networks is the world’s leading provider of access network solutions. Our comprehensive, end-to-end product portfolio supports global service providers with innovative, leading-edge HFC, PON and broadband network products

.

We’re looking for bold thinkers and exceptional builders—engineers who thrive in highly technical environments and want to design hardware that powers the connected world. If you enjoy solving tough engineering challenges, collaborating with a talented cross‑functional team, and owning designs from concept through production, this is the role for you.

How You’ll help us connect the world:

As a Power Hardware Engineer reporting to the Sr. Manager of Hardware Engineering, you will play a key role in architecting and developing stand‑alone and embedded power supplies for indoor and outdoor CATV/networking equipment. You’ll work hands‑on across the entire product lifecycle—from early concept, modeling, and prototyping to validation, manufacturing, and sustaining engineering.

What You’ll Own

• Lead electrical design of SMPS‑based power supplies from concept through production release
• Design for challenging environments, ensuring high reliability and robustness
• Perform electrical, thermal, and DVT measurements throughout all stages of development
• Model, breadboard, and build prototypes for rapid iteration and validation
• Design and specify custom magnetic components for advanced SMPS designs
• Develop and optimize digital and analog control interfaces
• Mitigate input/output noise and improve power quality and efficiency
• Provide sustaining engineering support for existing power supply platforms
• Partner with manufacturing and supply chain teams to qualify alternate components and improve production efficiency

Required Qualifications:

• 7+ years of hands‑on SMPS design experience, including topologies such as Forward, Flyback, Buck, Boost, etc.
• Deep experience designing and specifying magnetics for power conversion
• Strong background in analog and digital power control circuits
• Solid understanding of noise mitigation, EMI/EMC considerations, and power integrity
• Strong knowledge of discrete semiconductors and passive components
• Proficiency with electrical modeling and simulation tools (e.g., SPICE‑based tools, simulation suites)

• Re-location assistance will be provided for candidates within U.S.

.Important Candidate Notice: On January 9, 2026, CommScope finalized the sale of its Connectivity and Cable Solutions segment, which included the CommScope name and brand, to Amphenol Corporation. The remaining businesses — Access Networks Solutions (now rebranded as Aurora Networks) and RUCKUS Networks have been unified under the new parent company, renamed as Vistance Networks. The role being advertised is part of Aurora Networks.

Why Join Us?

Vistance Networks shapes the future of communications technology, pushing past what is possible. We deliver solutions that bring reliability and performance to a world always in motion. Our global team of innovators and employees are trusted advisors who listen to customers first, then deliver

value.

Aurora Networks (formerly CommScope’s Access Networks Solution segment) is the world’s leading provider of access network solutions. Our comprehensive, end-to-end product portfolio supports global service providers with innovative, leading-edge HFC, PON and broadband network products.

If you want to grow your career alongside bright, passionate, and caring people who strive to create what's next…..come connect to your future at Vistance Networks.

Vistance Networks is an Equal Opportunity Employer (EEO), including people with disabilities and

veterans.

A leader in technology and innovation, Southwire Company, LLC is one of North America’s largest wire and cable producers. Southwire and its subsidiaries manufacture building wire and cable, utility products, metal-clad cable, portable and electronic cord products, OEM wire products and engineered products.

Value Stream Manager Summary

The Value Stream Manager is a leadership role that will be primarily focused on ensuring a safe work environment for all team members, while maintaining continuous operational execution and production of quality products that are delivered on-time to customers within established cost targets.

The Value Stream Manager will focus on eliminating waste developed in the value stream process, identifying business growth opportunities, understanding the importance of customer value created by the company, maximizing capacity to grow sales and driving lean continuous improvement.

Strategically focused and leading/driving team members in Kaizen events, problem solving activities, owning the value stream.

Key Responsibilities

• Manage all value stream related KPIs (SQDCI).
• Co-leads recordable or significant case investigations including root-cause and corrective actions.
• Responsible for ensuring the execution of findings of accident investigations and safety alerts within their value stream.
• Ensure policies and processes are deployed uniformly throughout the value stream.
• Actively leads the daily huddle process and can share information related to value stream as needed.
• Lead problem solving events and follow-up with corrective actions for completion
• Create a standard for value stream process and ensure entire team are properly trained, resourced, supplied, and managed to attain the objectives
• Develop a highly motivated and committed workforce with emphasis on the development of skills needed to accomplish safety, quality, on-time delivery, and product cost goals.

Qualifications And Experience Requirements

• Bachelor’s degree is required
• 5+ years of management experience
• Bilingual is a plus
• Lean manufacturing experience is required
• Strong MS Excel experience desired
• SAP is preferred

Benefits We Offer:

• 401k with Matching
• Family and Individual Insurance Packages (Health, Life, Dental, and Vision)
• Paid Time Off & Paid Holidays
• Long & Short-Term Disability
• Supplemental Insurance Plans
• Employee Assistance Program
• Employee Referral Program
• Tuition Reimbursement Programs
• Advancement & Professional Growth opportunities
• Parental Leave
• & More

Southwire is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law.

A leader in technology and innovation, Southwire Company, LLC is one of North America’s largest wire and cable producers. Southwire and its subsidiaries manufacture building wire and cable, utility products, metal-clad cable, portable and electronic cord products, OEM wire products and engineered products.

Material Handler

Hours: 4:45 pm – 5:00 am

Days of the week: Swing shift (2, 2, 3 model) – 36 hours one week, 48 hours next week – off every other Friday, Saturday and Sunday. Work 14 days a month!!!

Location: Bremen, IN

Starting Pay Rate: $23 + $1.00 shift differential with multiple automatic increases your first year!

Eligible for full benefits after 30 days!

Daily Pay option available!

Job Description

As a Material Handler, you will support our manufacturing operations by providing a full range of warehousing and logistics services to ensure fulfillment to customer and business expectations. Our material handlers are dedicated, hardworking, and passionate about getting things done. If you are looking for an opportunity to learn and grow with an industry leader, join our team!

What you will do:

• Focus on excellent customer service and take pride in every order we fill for our customers
• Operate a forklift to load and unload trucks and move material in the warehouse or plant
• Stage finished products
• Entering data using warehouse computer applications
• Perform all duties and specific projects as assigned in a safe and productive manner

What you will need:

• High School Diploma or equivalent
• Minimum of two year experience operating a forklift in a warehouse or industrial environment
• Valid unrestricted driver's license

Benefits We Offer:

• 401k with Matching & Pension Plan (Eligible for Pension after 1,000 Hours Worked)
• Family and Individual Insurance Packages (Health, Life, Dental, and Vision)
• Paid Time Off & Paid Holidays
• Long & Short-Term Disability
• Supplemental Insurance Plans
• Employee Assistance Program
• Employee Referral Program
• Tuition Reimbursement Programs
• Advancement & Professional Growth opportunities
• Parental Leave
• & More

Southwire is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law.

Granite delivers advanced communications and technology solutions to businesses and government agencies throughout the United States and Canada. We provide exceptional customized service with an emphasis on reliability and outstanding customer support and our customers include over 85 of the Fortune 100. Granite has over $1.85 Billion in revenue with more than 2,100 employees and is headquartered in Quincy, MA. Our mission is to be the leading telecommunications company wherever we offer services as well as provide an environment where the value of each individual is recognized and where each person has the opportunity to further their growth and achieve success.

Granite has been recognized by the Boston Business Journal as one of the "Healthiest Companies" in Massachusetts for the past 15 consecutive years.

Our offices have onsite fully equipped state of the art gyms for employees at zero cost.

Granite's philanthropy is unparalleled with over $300 million in donations to organizations such as Dana Farber Cancer Institute, The ALS Foundation and the Alzheimer's Association to name a few.

We have been consistently rated a "Fastest Growing Company" by Inc. Magazine.

Granite was named to Forbes List of America's Best Employers 2022, 2023 and 2024.

Granite was recently named One of Forbes Best Employers for Diversity.

Our company's insurance package includes health, dental, vision, life, disability coverage, 401K retirement with company match, childcare benefits, tuition assistance, and more.

If you are a highly motivated individual who wants to grow your career with a fast paced and progressive company, Granite has countless opportunities for you.

EOE/M/F/Vets/Disabled

General Summary of Position:

This position is for a telecommunications, structured cabling, and technology Field Service Technician. The job will consist of completing various cable runs, hardware moves, adds, changes and "smart hands" installations for Granite customers, primarily within a 50-mile service area radius. The technician will also be responsible for leading subcontracted crews on larger projects in the area. Company vehicle provided. Technician will directly report to a remote supervisor.

Duties and Responsibilities:

• 
  
• Communicate effectively with the NI team members and departments that schedule each service call
  
• Complete basic structured cabling repairs and new installations according to industry standard practices
  
• Smart Hands installations and maintenance with various technology platforms and changing SOW's
  
• Provide all required job and project deliverables within 24 hours or otherwise specified in an SOW
  
• Keep company vehicle clean and serviced properly
  
• Keep all materials & tools stocked. Accountability maintained through scheduled inventory counts.
  

Required Qualifications:

• 
  
• 5-10 years structured cabling experience
  
• Ability to tone and test copper wiring / analog dial tone
  
• Ability to terminate and test Cat5e, Cat6, Cat6A cablings
  
• Ability to terminate and test Coax cabling
  
• Ability to patch and roll fiber
  
• Laptop skills (Excel, Putty/Hyper Terminal for ability to allow remote session to engineer / NOC)
  
• Basic Networking (Modem Gui's, Command Prompts, Initiate Remote sessions)
  
• Light travel
  
• Clean Driving Record
  

Preferred Qualifications:

• 
  
• BICSI Certifications
  
• Wireless Knowledge (Ability to utilize Ekahua software)
  
• Lift Certified
  
• OSHA Certifications
  
• A+ networking certification
  
• Fiber certifications
  

Position Description

Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Dallas, Texas

Hear it from a Torque Mobile Mechanic Technician Here:

• 
  
• Technician Positions Pay Each Week
  
  
• Hourly Pay: $38.00 per hour
  
  
• Retention Bonus: $2000 paid every quarter within the first year
  
  
• Schedule: Flexible 40-hour work week (weekend premiums apply)
  
  
• Fuel Card and Company Cell Phone provided
  
  
• For mobile technicians, work site service vehicle will be provided
  
  
• Grow with Ryder: This position provides additional training to level up.
  
  

We want the right Maintenance Repair Mechanic Technician to join us at Ryder to manage our fleet of Heavy Duty Trucks.

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Kim or text “Dallas” to 9 to speak with your recruiter today.

All the benefits you expect — without the wait.

• 
  
• Medical, Dental, Vision after 30 days
  
  
• 80 hours PTO your first year, starting Day 1
  
  
• Yearly merit pay increases
  
  
• 401 (k) company match
  
  
• PPE, uniforms, and boot allowance
  
  
• Build your skills - paid training
  
  
• Safety‑first workplace & State-of-the-art equipment
  
  
• Top Tech Competition: Earn $250 – $50,000 per year
  
  
• U.S. military veterans - extra paid day off
  
  
• 15% company stock discount
  
  
• Up to $5,000 in Tech tuition repayment
  
  
• 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
  
  
• Employee discounts on tools, vehicles, travel, tech & more
  
  

Apply today and see why a job with Ryder is what you’ve been looking for. Call us or go online to apply to one of our career opportunities

Click Here to See All Ryder Careers:

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work
  
  
• Diagnostics and repairs, including AC, electrical systems
  
  
• Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs
  
  
• Four (4) years or more Relevant work experience, preferred
  
  
• NonCommercial Driver License CLASS E, preferred
  
  
• Valid Commercial Driver License (CDL) CLASS A, preferred
  
  
• Other State driver's license, as required
  
  
• Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02
  
  
• Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents
  
  
• Must be able to drive Ryder vehicles
  
  
• Ability to:
  
  
• Understand and adhere to Company policies in all areas
  
  
• Complete repair orders with the Company established systems
  
  
• Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
  
  
• Work independently and as a member of a team
  
  
• Prioritize workload
  
  
• Proven hands-on mechanic, customer service, and account management skills
  
  
• Demonstrates customer service skills
  
  
• Strong verbal and written communication skills
  
  
• Flexibility to operate and self-driven to excel in a fast-paced environment
  
  
• Self-starter and self-sufficient approach
  
  
• Capable of multi-tasking, highly organized, with excellent time management skills
  
  
• Detailed oriented with excellent follow-up practices
  
  
• Entrepreneurial spirit
  
  
• Preventive Maintenance (PM230&PM298) within 90 Days
  
  
• Brakes-Air (BA220&BA298) within 90 Days
  
  
• Brake mechanics/inspectors FMCS 396.25
  
  
• Hydraulic Brake (BH220&BH298) where appropriate within 90 Days
  
  
• Tire & Wheel TW220 within 90 Days
  
  
• CF609 & A/C trained and qualified (AC220&AC298) within 180 Days
  
  
• HD electrical - DR208 within 90 Days
  
  
• Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days
  
  
• Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix)
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair
  
  
• Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support
  
  
• Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable
  
  
• Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task
  
  
• Instructs and advises other technicians regarding maintenance repair procedures and diagnostics
  
  
• Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction.
  
  
• Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:
  
  
• A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks
  
  
• Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified
  
  
• Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes
  
  
• Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions
  
  
• Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check
  
  
• Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation
  
  
• Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems
  
  
• Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables
  
  
• Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights
  
  
• Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers
  
  
• Driveline: Lubricate drive line; Inspect components for wear or damage
  
  
• Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks
  
  
• Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition
  
  
• Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors
  
  
• Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal
  
  
• Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc
  
  
• Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298)
  
  
• Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism
  
  
• Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents
  
  
• Performs other duties as assigned.
  
  
• Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements.
  
  
• Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer.
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 1 day ago (3/17/2026 1:49 PM)

Requisition ID 2

Location (Posting Location) : State/Province TX

Location (Posting Location) : City DALLAS

Location (Posting Location) : Postal Code 75247

Category Technicians/Service Employees9

Employment Type Regular-Full time

Travel Requirements Greater than 60%

Position Code 1001374

Min Pay USD $38.00/Hr.

Max Pay USD $38.00/Hr.

Wallace William is looking for multiple Structured Cabling and Low Voltage Technicians to work on large new and existing construction projects in NYC.

Responsibilities:

• Pull Cat5e, Cat6, Cat6a cables and fiber optic cabling systems.
• Installation of data equipment, including data racks, patch panels, cable trays, high level understanding of IDF, MDF build outs.
• Experience with jack and patch panel terminations.
• Utilizes appropriate testing equipment to test installed cables.
• Run security wiring and installation of CCTV and Access Control Panels

Qualifications:

• Must have all your low voltage hand tools and PPE Gear.
• Must have your OSHA 30 and SST

Job Title: Sr. Principal Electrical Design Engineer

Job Family:  Electrical Design Engineering

Organization : Data Center Infrastructure Team

Location:  Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

Jabil has an exciting opportunity for a highly experienced and technically proficient Principal Electrical Engineer to engage in the design, fabrication, and integration of electrical systems for data center power and cooling products, as well as factory enablement projects. This role includes full-stack electrical design from generator systems to AI rack integration zones, with a focus on PDUs, UPS systems, MV/HV power distribution, phased power infrastructure, and controls architecture. The ideal candidate will bring deep technical expertise and a passion for delivering scalable, reliable, and compliant infrastructure solutions.

The Sr. Principal Electrical Integration Engineer will manage and oversee the electrical systems essential for the data center, energy storage systems, and HVAC applications. This role will involve developing specifications, selecting key components, routing wires and cables, establishing connections, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

Product & System Design :

• Knowledge of high-efficiency power conversion and point-of-load regulation for AI/ML server racks (BBU, rPDU).
• Understanding of rack power zoning, load balancing, and redundancy strategies for tiered compute workloads.
• Ensure electrical systems are properly integrated into fabricated enclosures and structural assemblies.
• Lead the electrical design and integration of UPS systems, power conversion units, and safety interlocks.
• Develop and maintain single-line and three-line diagrams for power distribution systems, ensuring clarity, accuracy, and compliance with NEC, IEEE, and UL standards.
• Design and validate three-phase power systems, including load balancing, fault protection, and redundancy strategies for high-availability environments.
• Engineer and integrate medium-voltage (MV) and high-voltage (HV) power distribution components such as switchgear, transformers, busways, and protective relays.
• Specify and qualify electrical components including circuit breakers, contactors, CTs/PTs, surge protection devices, isolation switches for MV/HV applications and the design and development of wiring harnesses

Factory & Facility Integration :

• Design end-to-end electrical distribution systems from generator and utility interface to AI rack integration zones.
• Coordinate with cross functional teams to ensure electrical infrastructure aligns with facility layout, safety codes, and operational requirements.
• Plan and implement power redundancy, load segmentation, and scalable distribution architectures to support high-density compute environments.
• Ensure proper grounding, EMI shielding, and thermal management across all facility-level electrical systems.

Fabrication & Implementation :

• Define fabrication processes including panel building, cable routing, and system integration, ensuring manufacturability and serviceability.
• Perform electrical load calculations, short-circuit analysis, arc flash studies, and thermal modeling using tools such as ETAP, SKM PowerTools, or EasyPower.
• Lead design reviews, risk assessments, and validation testing to ensure compliance with UL, IEC, NEC, CE, RoHS, and REACH standards.
• Interface with suppliers and customers resolve fabrication and quality issues, and ensure adherence to specifications.
• Support prototype builds, field deployments, and customer engagements to gather feedback and refine designs.

Controls Architecture :

• Develop and implement electrical controls architecture for power and cooling systems, including PLCs, SCADA integration, and remote monitoring capabilities.
• Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
• Collaborate with software and automation teams to ensure seamless integration of control systems with facility and product-level infrastructure.
• Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.

Leadership & Documentation :

• Develop and maintain engineering documentation including BOMs, test procedures, and engineering change orders (ECOs).
• Mentor junior engineers and provide technical leadership across cross-functional teams.
• Drive continuous improvement initiatives focused on cost reduction, design for manufacturability (DFM), and product scalability

How will you get here? 

Education :

• Bachelor’s Degree in Electrical Engineering or related engineering discipline.

Experience :

• 10+ years of experience in electrical design and fabrication, with a focus on data center or industrial power systems
• Proficiency in ECAD tools (AutoCAD Electrical, EPLAN, SolidWorks Electrical) and integration with mechanical CAD platforms
• Strong understanding of MV/HV power distribution, lithium-ion UPS systems, and three-phase electrical infrastructure
• Experience with electrical analysis tools (ETAP, SKM PowerTools, EasyPower)
• Proven experience in facility-level electrical design and construction support and Excellent leadership, communication, and cross-functional collaboration skills

Knowledge, Skills, Abilities:

• Excellent interpersonal and communication skills
• Creative, self-motivated, accountable, and team-oriented
• Able to work independently with minimal oversight as part of a global team
• Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
• Skilled in writing reports, business correspondence, and procedural guides
• Effective at presenting information and responding to management, clients, and public queries
• Capable of influencing others and sharing best practices while mentoring less experienced engineers
• Capable of assessing projects, articulating risks, and developing project milestones
• Familiar with stage-gate processes in project lifecycle management (PLCM)
• Excellent problem-solving skills and attention to detail

Preferred Qualifications:  

• Master’s Degree in Electrical Engineering
• Active Professional Engineer (PE) license
• Experience with data center infrastructure: UPS systems, switchgear, CRAC units, and PDUs
• Familiarity with global compliance standards: UL, CE, RoHS, REACH, and IEEE.
• Hands-on experience with panel fabrication, wiring, and system integration
• Knowledge of thermal and mechanical constraints in electrical enclosure design and experience working with global suppliers and contract manufacturers
• Experience in WindChill and DevOps

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Sr. Avionics Harness Technician at Reliable Robotics, you will be a part of the Production organization. This is a small but growing team of highly motivated people passionate about delivering quality products and services on time, with unquestionable value. You'll play a critical role in the build, operation, integration, test, diagnostics, inspection, and maintenance of highly reliable avionics systems, such as wiring harnesses and electromechanical hardware. You'll also help with the installation of those systems onto aircraft. Your work will support various product development phases such as prototype, research and development, aircraft certification, and recurring production. This is a fantastic opportunity to serve as the last line of defense for ensuring that our safety-critical systems are reliable and produced to the intended engineering requirements.

Responsibilities

• Build, operate, integrate, test, diagnose, inspect, and maintain highly reliable systems, including wire harnesses, cable assemblies, avionics assemblies, and circuit card assemblies

• Read, interpret, and work from drawings, controlled documentation, and processes such as drawings, layouts, assembly procedures/work instructions, schematics, engineering drawings, and master parts lists

• Develop and improve manufacturing and installation instructions

• Assure product and process quality by testing finished-product and process capabilities

• Resolve product non-conformances and collaborate with the quality team to implement corrective actions

• Record work performed in a clear, precise, and complete manner

• Assist with the development of production and improvement processes

Basic Success Criteria

• 8+ years of professional experience building/fabricating wire harnesses or cable assemblies, or other testing, integration, or mechanical assembly experience

• 5+ years of hands-on experience reviewing technical designs and working from drawings, schematics, layouts, assembly/procedures, master parts lists, and other controlled documentation

• One or more of the following certifications: IPC-A-610, IPC-A-620, IPC J-STD-001, NASA-STD-8739.4

• Ability to proficiently use a PC/Mac, Google Suite, manufacturing execution systems, JIRA, or equivalent tools

• Ability to lift 25-pound boxes to a height of 3-4 feet, with or without reasonable accommodation

Preferred Criteria

• Experience working in an electro-mechanical manufacturing company, a precision manufacturing company, or a high-volume manufacturing company

• Electro-mechanical assembly and prototype development experience

• Experience setting up and running tests and experiment

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The position will be located at our facility in Mountain View, California.

Must be willing to travel up to 10% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $125K - $145K