Ace Controls Llc Jobs in Usa

Parsons is looking for an amazingly talented Project Controls Manager to join our team! In this role you will have the privilege of working on the premier Infrastructure project in the Country, as well as receive all of the benefits of working for Parsons! This Program is the most urgent infrastructure program in the country - a comprehensive set of rail investments that will improve commuter and intercity services, add needed resiliency and, in its later stages, create new capacity between Newark, New Jersey and New York City.

The Gateway Program is the most urgent infrastructure program in the country a comprehensive set of rail investments that will improve commuter and intercity services, add needed resiliency and, in its later stages, create new capacity between Newark, New Jersey and New York City, the busiest section of the Northeast Corridor (NEC). The first phase of the Gateway Program includes the Hudson Tunnel Project (HTP), which includes the construction of a new two-track tunnel under the Hudson River connecting to Penn Station New York as well as the full rehabilitation of the existing 110-year-old North River Tunnel. The Gateway Development Commission (GDC), established through bi-state legislation, is responsible for the financing and development of the Hudson Tunnel Project.

As a tri-venture partner with Parsons, Arcadis, and Mace (MPA) is the Delivery Partners (DP) to provide advice, leadership, and support to GDC for the development and implementation of HTP. This is a master service with task order contracts for a 15-year contract encompassing a broad range of strategic advisory services, project management, design management, construction management, stakeholder coordination, federal compliance, operations support, office administration, and related services.

POSITION OVERVIEW: Develops, manages, and/or executes all phases of the project controls effort (mainly cost management and reporting). Typically manages large-sized projects. The incumbent utilizes widely diversified knowledge of project controls activities, and draws upon extensive experience and exposure to various types of projects and clients.

SPECIFIC RESPONSIBILITIES:

• Lead the cost management and reporting functions on a large construction development program.
• Provides guidance, direction, and specialized assistance to project for the resolution of difficult and complex project control problems.
• Interfaces with clients, attends regular meetings, and provides statistical reports.
• Manages a team of Project Control Engineers/Specialists who are qualified to analyze, evaluate, and forecast project costs, as well as performance against an established schedule with critical milestones.
• Assesses the impact(s) of design/construction changes and schedule slippages.
• Oversees the development and maintenance of an established reporting system to show the hierarchy of cost plans and schedules; keeps project and company management fully informed.
• Recommends and oversees the customization of project control reporting systems and reports to meet specific project requirements.
• Creates statistical / cost reports for management on a recurring or ad hoc basis.
• May be required to make informal or formal presentations.
• Performs other responsibilities associated with this position as may be appropriate.

EDUCATION/EXPERIENCE:

• Bachelor's degree in Engineering or Construction Management (or related field)
• 15-20+ years of related experience, including supervisory/managerial experience.
• Strong cost management and reporting background is required.

SKILLS/COMPETENCIES:

• Requires basic engineering knowledge in electrical, mechanical, civil, or a related fields.
• Proficient PC skills including a proficiency in various Project Controls Software and Microsoft Office Suite.
• Proven ability to perform in a supervisory capacity.
• Thorough knowledge of industry practices is required.

Security Clearance Requirement: None

This position is part of our Corporate team. For over 80 years, Parsons Corporation, has shaped the future of the defense, intelligence, and critical infrastructure markets. Our employees work in a close-knit team environment to find new, innovative ways to deliver smart solutions that are used and valued by customers around the world. By combining unique technologies with deep domain expertise across cybersecurity, missile defense, space, connected infrastructure, transportation, smart cities, and more, we're providing tomorrow's solutions today.

Salary Range: $128,700.00 - $231,700.00

We value our employees and want our employees to take care of their overall wellbeing, which is why we offer best-in-class benefits such as medical, dental, vision, paid time off, Employee Stock Ownership Plan (ESOP), 401(k), life insurance, flexible work schedules, and holidays to fit your busy lifestyle!

Parsons is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status or any other protected status.

We truly invest and care about our employee's wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons questAPPLY TODAY!

Summary:

We are seeking an experienced Senior Controls Engineer to lead and support automation and controls systems within an industrial manufacturing environment. This role is responsible for designing, programming, commissioning, and troubleshooting PLC- and HMI-based systems while partnering closely with operations, maintenance, and engineering teams to drive reliability, efficiency, and continuous improvement.

Key Responsibilities:

• Design, program, and troubleshoot PLC, HMI, and industrial control systems
• Lead controls efforts for new equipment, upgrades, and capital projects
• Support commissioning and startup of automated manufacturing systems
• Diagnose and resolve complex electrical, controls, and automation issues
• Develop and maintain control system documentation and standards
• Collaborate with operations, maintenance, and IT teams on system integration
• Mentor junior controls engineers and technicians
• Ensure compliance with safety, electrical, and manufacturing standards

Qualifications:

• Bachelor’s degree in Electrical Engineering, Controls Engineering, or related field (or equivalent experience)
• 10+ years of controls/automation experience in an industrial manufacturing environment
• Strong PLC programming experience (Allen-Bradley, Siemens, or equivalent)
• Experience with HMIs, VFDs, motion control, and industrial networks
• Proven experience leading automation projects from concept through commissioning
• Ability to troubleshoot complex systems under production pressure

Preferred Qualifications:

• Experience with robotics, vision systems, or SCADA
• Knowledge of safety PLCs and machine safety standards
• Prior experience mentoring or leading technical teams

Why Join Us:

• High-impact role with ownership over automation systems
• Stable manufacturing operation with ongoing capital investment
• Competitive compensation and benefits

Join SEG Sparkstone - Engineering the future of Power Distribution & Control Through Agile Engineering

At SEG Sparkstone, we’re more than a manufacturing company — we are a leading innovator in power distribution and control solutions. Founded as Chicago Switchboard in 1936, today we have manufacturing locations in Addison Illinois, Armada Michigan, Houston Texas, San Antonio Texas, and Loveland Colorado.

We design and deliver custom-engineered low and medium voltage electrical products and controls that power industries, facilities, and infrastructure across the United States. SEG Sparkstone is a trusted leader in the industry that is recognized for our agility and progressiveness that allows you to have a direct impact on our future.

If you are passionate about making a difference in a fast-paced environment and value agility, collaboration, customer focus, and integrity, we would love to hear from you.

Position Overview

SEG is seeking a motivated, detail oriented Inside Sales Support Representative to assist in growing sales of custom UL508A/698 control and relay panel solutions. This role supports business development efforts by preparing accurate quotations, coordinating with engineering and production teams, and ensuring timely, customer-focused service. The ideal candidate brings strong technical aptitude and an organized, team-oriented approach.

Location

This position is based on-site at CES Loveland, Colorado facility and requires presence in the location five days per week.

Key Responsibilities

• Support sales growth through prompt evaluation of quotation opportunities and development of solutions that address specific customer needs using technical and electrical expertise.
• Prepare quotations, perform project costing, and assist with project kick-off activities once orders are received.
• Collaborate closely with engineering and production teams to develop accurate and competitive quotes for custom control panel solutions.
• Maintain working knowledge of UL508A/UL698 standards, industry trends, and the competitive landscape.
• Drive follow-up on active opportunities with manufacturers’ representatives and sales partners by:
• Obtaining proposal status and forecasting future orders, including value and timing.
• Evaluating customer engagement and overall mindshare for CES products.
• Providing regular feedback to management on pipeline health and opportunity progression.
• Maintain accurate records of customer interactions, quotations, and pipeline activity within the CRM system.

Qualifications

• Bachelor’s degree in engineering a plus or minimal of 3+ years of experience with UL508/698 control, relay panels.
• Strong understanding of UL508A/UL698 standards and general industrial, automation control & relay panels construction preferred.
• Demonstrated experience using structured proposal and quotation processes; ability to maintain momentum and solve problems in imperfect or fast-paced environments.
• Industrial Technology, Automation, or a related field is highly desirable.
• Ability to read and interpret electrical schematics, technical drawings, and control, relay panel layouts.
• Self-starter with effective communication, negotiation, and interpersonal skills.
• Proficiency with CRM systems and Microsoft Office applications (Excel, Word, PowerPoint)

Region: United States

• Job Reporting: Commercial Organization

Job Level: Individual Contributor

• Schedule: Full-time

This job is a required to be on site

• Loveland, Colorado CES location.

Does this position offer relocation? No

• Travel: Up to 5% of the time

Machine Vision / Controls Engineer

Do you enjoy:

• Working on new automation challenges every few months
• Performing vision feasibility testing and proving out inspection methods
• Researching and implementing new automation technologies
• Managing your work with a high level of autonomy
• A blend of desk work (~70%), shop work (~20%), and field work (~10%)
• Working in a small engineering-driven company where your work has visible impact

Job Description:

We are looking for a Machine Vision / Controls Engineer to join our fast-paced automation engineering firm. This role focuses on developing machine vision inspection systems while also supporting controls development and feasibility testing for custom automation equipment.

You will perform vision feasibility studies, camera/lens/lighting selection, and vision programming, primarily using Keyence Machine Vision systems. In addition, you will support PLC programming, system integration, and automation debugging on our custom machines.

This position works closely with mechanical, electrical, and controls engineers to integrate machine vision, robotics, motion control, and PLC systems into complete automation solutions.

Engineered Vision is dedicated to improving how factory automation projects are implemented through transparency, quality, and speed.

Duties:

• Perform machine vision feasibility testing in our lab to validate inspection concepts and system performance
• Size and select cameras, lenses, and lighting for vision inspection applications
• Develop and program machine vision systems (primarily Keyence)
• Integrate vision systems with robots, PLCs, and motion control systems
• Program and support PLC controls systems (primarily Allen Bradley ladder logic)
• Assist with controls debugging and automation system integration
• Support machine builds, testing, and troubleshooting in the shop
• Assist with system commissioning and startup at customer facilities
• Create and maintain vision documentation, feasibility reports, and technical documentation
• Collaborate with mechanical and electrical engineers to optimize inspection and automation performance
• Deploy systems at customer facilities and perform service work
• Travel up to 15% (mostly within 250 miles of Columbus, Ohio)

Required Qualifications:

• US Citizenship Required (we work on Government Projects – Green Card will not be acceptable)
• Must live in the Columbus, Ohio area
• Bachelor of Science in Electrical Engineering, Computer Engineering, Mechanical Engineering, Mechatronics, or related field
• Experience performing machine vision feasibility testing and inspection development
• 2+ years experience working in industrial automation including: selecting vision cameras/lenses/lights, feasibility testing, and vision programing
• Ability to troubleshoot and optimize automation systems in real-world manufacturing environments
• Strong documentation and communication skills

Preferred Qualifications:

• 5+ years experience working in industrial automation selecting vision cameras, lenses, and lighting
• 2+ years experience with machine vision programming of Keyence Machine Vision Cameras
• 2+ years experience working with a custom machine builder as a controls engineer
• Experience integrating vision with robots and PLC systems
• Experience with industrial lighting design and lens selection
• Customer run-off and field troubleshooting experience
• Ability to troubleshoot and optimize automation systems in real-world manufacturing environments

About Us:

Engineered Vision is a small custom machine builder focused on newer technologies including robots, machine vision, and motion control. We opened our doors to deliver affordable automation fast, with typical project sizes ranging from $100k–$2MM.

Engineered Vision is one of the fastest growing custom machine design and engineering firms in Columbus, Ohio. We integrate our machines across industry boundaries and pair the latest technologies with real industry needs to deliver strong ROI.

We consider our shop an engineer’s playground with robots, machine vision systems, CNC machining, and 3D printing.

We look forward to working with you.

Job Type: Full-time

Benefits:

• 401(k)
• Dental insurance
• Health insurance
• Health savings account
• Life insurance
• Paid time off
• Referral program
• Vision insurance

Schedule: Full-Time

Work Location: In person

Job Title: Fabrication Quality Control (QC) Manager

Location: Long Beach, MS (Open to Relocation)

Employment Type: Direct Hire

Work Environment: 100% Onsite

Travel: 0–5% local travel to fabrication shop, office, or job sites as needed

Compensation

• Salary: $102,000 – $136,000 annually (based on experience)
• Bonus: Discretionary annual bonus

Position Summary

Wheeler Staffing Partners is seeking an experienced Fabrication Quality Control (QC) Manager to oversee and manage quality control and assurance processes for fabrication operations supporting industrial and process piping projects. This role provides technical leadership to ensure fabricated products meet industry standards, regulatory requirements, project specifications, and client expectations.

The QC Manager will work closely with estimating, engineering, and fabrication teams to ensure consistent quality, compliance with applicable codes, and continuous improvement in fabrication processes. The ideal candidate has experience within pipe fabrication, process piping, or mechanical subcontractor environments, along with strong knowledge of engineering drawings, fabrication methods, and estimating standards.

Key Responsibilities

Quality Control Leadership

• Develop, implement, and maintain quality control standards and procedures aligned with industry codes, project specifications, and client requirements
• Oversee daily inspection of machinery, equipment, fabrication processes, and working conditions to ensure compliance with quality and regulatory standards
• Prepare daily inspection reports and provide recommendations for corrective actions when quality issues are identified
• Establish and maintain quality assurance policies, procedures, and quality manuals supporting ISO 9001:2015 and ASME certification standards

Fabrication Quality Oversight

• Perform and document in-process inspections and verification for piping, plumbing, and sheet metal fabrication
• Ensure fabricated products meet project design specifications, applicable codes, and client requirements
• Inspect fabrication documentation and maintain records required for quality compliance and project documentation
• Prepare project turnover documentation and quality packages for completed work

Welding & NDE Management

• Test and certify welders and welding procedures according to applicable codes
• Maintain welder continuity logs in compliance with industry standards
• Coordinate and schedule contract Non-Destructive Examination (NDE) testing as required

Regulatory Compliance

• Ensure all quality control activities comply with industry regulations, codes, and project standards
• Monitor regulatory changes affecting fabrication and piping standards and communicate updates to internal teams

Data Analysis & Continuous Improvement

• Analyze quality metrics, trends, and performance data to identify opportunities for process improvement and defect reduction
• Conduct root cause analysis and support corrective and preventative actions
• Lead or support cross-functional quality improvement initiatives that enhance operational efficiency and product quality

Estimating & Bid Support

• Review Requests for Quotation (RFQs) and assist estimating teams with quality requirements and bid specifications
• Support cost estimating efforts related to fabrication processes and project requirements
• Utilize established KPI metrics to determine performance factors and labor hour calculations during estimate development

Cross-Functional Collaboration

• Partner with estimating, engineering, project planning, and fabrication teams to resolve quality concerns and implement corrective actions
• Support development of fabrication strategies for new projects or process improvements

Training & Team Development

• Provide training, coaching, and mentorship to quality control personnel and fabrication staff on quality standards and best practices
• Promote a culture of safety, quality, and continuous improvement throughout fabrication operations

Required Qualifications

• 5+ years of quality control experience within pipe fabrication, industrial/process piping, or mechanical subcontractor environments
• Experience working in a fabrication shop environment
• Ability to read and interpret engineering drawings, specifications, and fabrication documentation
• Experience with cost estimating related to fabrication and piping work
• Knowledge of pipe fabrication methods, materials, and project specifications
• Familiarity with process piping unit rates and estimating references such as ’73 Price Book or Page & Nations
• Strong analytical, documentation, and quality inspection skills
• Ability to manage multiple projects in a fast-paced fabrication environment

Preferred Qualifications

• Experience with modular estimating
• Experience utilizing KPI metrics for labor hour build-up and performance factors
• Certified Welding Inspector (CWI) certification preferred
• ASNT Level II certification in ASME B31 piping preferred
• Advanced proficiency in Microsoft Excel and Microsoft Office Suite

Skills & Competencies

• Strong leadership and quality management capabilities
• Advanced knowledge of fabrication quality standards and inspection procedures
• Strong analytical and problem-solving skills
• Excellent communication and documentation abilities
• Ability to collaborate across engineering, fabrication, and project teams
• High attention to detail and commitment to quality standards

Work Environment

This position operates primarily within a fabrication shop and office environment and may include exposure to industrial work settings, including equipment, welding operations, and fabrication processes.

Why Work with Wheeler Staffing Partners

Wheeler Staffing Partners connects skilled professionals with leading organizations across the United States. Our team is dedicated to helping candidates find opportunities that align with their expertise, career goals, and long-term professional growth while providing personalized support throughout the hiring process.

Title

Electrical Controls Engineer/Industrial Electrician

Report to

Facility/Engineering Director.

Job Summary

Individual must be able to perform design,engineering, and field start up responsibilities for System Integration in the Electrical Controls Industry. In addition, proven trouble

shooting skills are necessary.

Job Duties / Responsibilities

• Design, fabricate, and install PLC based process control panels.
• Troubleshoot and upgrade existing control panels.
• Maintain inventory of all PLC/HMIrack systems and programs.
• Work to install110V, 220V, and 480V 3 phase wiring.
• Real electrical schematics and wiring diagrams.
• Be able to troubleshoot 480V electrical control systems.
• Specify wiring and motor controls for 480V systems.
• Install power distribution and protection systems.
• HMI Interfaces
• Temperature Controllers and Transmitters
• Pressure Transmitters
• 4-20ma Loop Controllers
• Burner Controllers and Actuators
• Industrial pH Meters
• Level Transmitters
• Flow Meters
• Variable Frequency Drives

Work Conditions

• Physically available to lift up to 50lb.
• Exposure to hazardous conditions associated with the Company
• 24/7 availability may be required.
• Manual dexterity and the ability to remain standing, crouching, and bending for long periods of time
• Overtime as needed.

Job Requirements

• AS, BSEE, BSEET, or technical degree.
• 3-5 years of industry experience.
• Review projects including quotes, job specifications, and resolve any quote to job specifications differences.
• System Architecture including non-standard material and control pane lpower requirements/distribution.
• Review specifications and standard practices – inclusive of the internal hardwired and logic standards, general specifications and scope of work.
• Design requirements which include establishing non-standard designs, generating system map layouts, generating a sequence of operations, reviewing cycle time

studies and dimension switch layouts, generation of design packages, design logic, enter logic, and the design of Smart Displays.

• Material responsibility includes advance material order, specifying Mod Box material, specifying Panel material, writing Mod Box EBMs and writing panel material EBMs.
• Assisting with installation • Debugging with no additional support • Launchand Standby
• As Builts

Technology Requirements

• RSLogix 5, 5000
• RS Networx for DeviceNet, ControlNet, EtherNet IP
• DriveExecutive, DriveExplorer

• PanelBuilder PDS, 1400e, 32
• RSView Studio
• Trouble Shooting PID Loops
• Calibrating Process Control Equipment
• Microsoft Office Suite

Benefits

• Competitive Compensation

- 401(k)

• 401(k) Matching
• Medical, Dental,and Vision Benefits
• Paid Time Off and Paid Holiday’s

Classification

Full Time Position

Details:

Job Title: API EM Quality Assurance Professional

Location: Indianapolis, IN

Duration: 12+ Months Contract (extendable)

Pay Range: $70 - $77 per hour on W2.

Qualifications:

At Client, we serve an extraordinary purpose. We make a difference for people around the globe by discovering, developing and delivering medicines that help them live longer, healthier, more active lives. Not only do we deliver breakthrough medications, but you also can count on us to develop creative solutions to support communities through philanthropy and volunteerism.

Join the energetic and growing Active Pharmaceutical Ingredient - External Manufacturing Organization (API-EM) that delivers a diverse portfolio of medicines essential to our patients around the world. The API EM Quality Assurance for Quality Control provides support to all QC activities at Contract Manufacturing organizations (CMs). The QA for QC position is essential for ensuring that all QC testing is in accordance with the validated methods and are compliant to cGMPs and regulatory commitments.

Basic Requirements:

• BS in a science-related field such as Pharmacy, Chemistry, Biological Sciences or related Life Sciences.

• 5+ years of GMP Quality Control Laboratory knowledge and/or experience in API or finished product manufacturing, QA or Engineering.

• Additional Preferences:

• Testing experience with Small Molecule

• Thorough technical understanding of quality systems and regulatory requirements relating to quality control laboratories

• Knowledge of pharmaceutical manufacturing operations.

• Demonstrated coaching and mentoring skills.

• Experience in root cause analysis.

• Demonstrated application of statistical skills.

• Demonstrated strong written and verbal communications skills.

• Strong attention to detail.

• Proficiency with computer system applications.

• Excellent interpersonal skills and networking skills.

• Ability to organize and prioritize multiple tasks.

• Ability to influence diverse groups and manage relationships.

Education Requirements:

• BS in a science-related field such as Pharmacy, Chemistry, Biological Sciences or related Life Sciences.

Other Information:

• Must complete required training for API EM Quality Assurance.

• No certifications required.

• Tasks require entering manufacturing and laboratory areas which require wearing appropriate PPE.

• Must be able to support 24 hour/day operations.

• Up to 20% travel US & OUS.

Responsibilities:

Key Objectives/Deliverables:

• Serve as a liaison between CMs and Client.

• Provide quality oversight of Quality control activities at CMs including being the initial point of contact for all quality-related issues with testing.

• Provide quality oversight of CM method validation or method transfer activities

• Escalate quality issues at CMs to Client's QA management.

• Assist in the establishment and revisions of Quality Agreements with affiliates and customers.

• Ensure compliance to Quality Agreements and Manufacturing Responsibilities Documents (MRDs).

• Coordinate and perform quality responsibilities of API shipments for stability testing. Provide quality oversight of API EM stability program.

• Participate in regulatory inspection preparations with CMs.

• Ensure that documented checks have been completed for the Certificates of Testing and Certificates of Environmental Monitoring (where applicable), and deviations, changes and batch documentation that demonstrates requirements have been met prior to batch release.

• Provide quality support of Quality Control with the focus on holistic review of key activities associated with or impacting the quality control testing including deviations, change controls and countermeasures.

• Assess the impact of analytical deviation investigations and changes and ensure that all appropriate records are documented and retrievable.

• Maintain awareness of external regulatory agency findings which individually or collectively reference the quality of the product.

• Review and approve documents including, but not limited to, analytical procedures, change control proposals, deviations, analytical equipment qualifications, analytical methods and computerized system validations.

• Participate in APR activities.

• Participate in projects to improve productivity.

• Participate in Joint Process (JPT) and Post Launch Optimization (PLOT) Teams.

Director of Quality Control

Reports To: Chief Executive Officer

Summary:

Director of Quality Control will ensure that the company maintains the highest standard of quality that is compliant with all applicable laws, regulations, and code requirements. Director of Quality Control will be expected to be in the office five days per week and report directly to the CEO for all items relating to quality control.

Major Duties and Responsibilities:

Collaborate with executive-level management in the development of quality goals and long-term quality plans.

Responsible for leading the successful implementation of ISO 9001:2015.

Manage Quality Control Department and lead its growth through hiring and training.

Maximize efficiency and productivity through extensive process analysis and improvement recommendations, as well as interdepartmental collaboration, and digital organization.

Maintain ASME Certification by ensuring code compliance and prepare and conduct training on ASME code requirements and additional foreign codes such as PED, Malaysia DOSH and MHLW (Japan).

Generate Inspection Test Plans, Quality Procedures, and Quality Instructions.

Maintain Job Books for all jobs, and Complete Job Packages and Code Documentation and upload to Company CRM.

Coordination of the Authorized Inspector/Repair Inspector and apply code stamping or marking to code parts under the direction of the Authorized Inspector/Repair Inspector.

Lead quarterly meetings with senior management to review quality KPIs.

Work with project managers in the development and adherence to quality objectives.

Responsible for leading customer and third-party audits.

Provide the appropriate management processes to ensure compliance with all applicable laws and certifications, conforms to company standards, and utilizes best-industry practices to manage safety risks to people, property, and the environment.

Conducts strategic and quality risk workshops and assessments throughout the organization.

Responsible for documenting customer feedback and a corrective action system.

Improve and re-establish Company Non-Conformance System and documents methods of improvement.

Team Management:

Lead, develop, and mentor team members.

Responsible for leading Quality Control Managers and their direct reports.

Guide larger, cross-divisional teams outside of direct span of control, managing work allocation, training, problem resolution and performance evaluation.

Education/Skills/Experience:

Bachelor’s degree or associate degree preferred.

10+ years of experience in Quality Control.

Ability to work independently and take initiative.

Strong verbal and communication skills.

Excellent time management and multitasking skills.

Highly organized and comfortable maintaining documents digitally.

Internal / External Contacts:

Internal

Member of Company Leadership Team.

Works closely with senior leadership all administrative support staff.

Maintain in-depth relations with all members of staff.

Work closely with all Project Managers.

External

Potential and existing customers.

Contractors/sub-contractors/vendors.

Regulatory bodies.

Miami Wiipica is dedicated to serving federal customers in construction, operations and maintenance, design/build, engineering, studies and remediation, and commissioning projects. Wiipica has the infrastructure and assets to support a variety of projects in diverse geographic locations, from design to close out. Our customers include the Department of Defense (including US Army Corps of Engineers), and the General Services Administration. Miami Wiipica works on projects nationwide.

Miami Wiipica offers excellent benefits including medical insurance, dental, vision, generous PTO and paid holidays, and competitive 401(k) matching.

Overview:

Miami Wiipica is currently seeking a Quality Control Manager (CQC)in Champlain, NY.No security clearance is required for this position, but ability to pass a background check is required to gain access to the worksite.

Qualified applicants for this position will be required to relocate to Champlain, NY for the duration of this project.

We are seeking a highly organized and detail-oriented Quality Control Manager to ensure the highest level of quality throughout our entire organization. This role is responsible for developing and implementing quality control processes, evaluating existing processes and identifying areas of improvement, and ensuring compliance with all regulatory standards. The Quality Control Manager will also develop quality assurance systems, monitor performance, and provide feedback.

Responsibilities include:

• Act as Construction Quality Control Manager at the work site to implement and manage the project specific Contractor Quality Control Plan.
• Provide overall coordination of the construction quality management program for assigned projects, plus provide regular and timely status reports to the Government sponsor about the status of these construction projects under your administrative and technical control
• In conjunction with the Government Construction Manager (CM), review and provide recommendations toward approval of contractor-submitted quality control plans.
• Provide relevant remarks on Government Quality Assurance (QA) reports or in identified sections of various Contractor’s Quality Control (QC) reports, particularly remarks about critical, definable features of work included.
• Validate quantity, condition and approval of materials on site before the installation by Subcontractors.
• Coordinate a team to review and witness successful testing and commissioning/certification of critical systems (i.e., mechanical - HVAC/TABS/DALTS/DDC; electrical - Pad Mounted Transformers/High-Voltage Systems/Switchgear/Automatic Transfer Switches/Frequency Converters, fire and life safety/fire protection systems; roofing systems and underwater structures).
• Assure quality workmanship in accordance with specifications and industry standards for concrete/masonry/stucco/building, envelope/structural steel/bolting/welding and other building materials/structural systems, as required.
• Attend/witness selected tests and review all applicable test reports and results for completeness and quality.
• Maintain extensive contact with key construction contractor representatives to promote an atmosphere of partnering and cooperation, quickly resolving problems while maintaining each construction schedule.
• Coordinate temporary utility and communication hook-ups for contractors, plus coordinate utility outages and road closures with Government personnel, as necessary. Coordinate lay-down areas and storage areas, as required.
• Coordinate excavation, hot work, burn and other construction-related permits, as required, subject to local restrictions.
• In conjunction with the Construction Manager (CM), perform cursory review of Activity Hazard Analyses (AHAs) and ensure via the Site Safety and Health Officer (SSHO) that these are discussed by the construction contractor plus their respective subcontractors prior to beginning each work activity, or when a new work crew is to perform the work in accordance with the three phases of QC.
• With the CM, review and provide recommendations toward acceptance of Crane Critical Lift Plans, along with crane operation qualifications and certificate of compliance. Observe critical lifts.
• Ensure each construction contractor is conducting monthly site safety self-evaluations and submitting the information with pay vouchers/invoices; perform worksite safety assessments as needed.
• Take appropriate, timely action to ensure construction contractor compliance of safety and health requirements, including leading safety stand-downs, as required, and recommending dismissal of key construction contractor staff from the project due to non-performance or recurring violations.
• Ensure reporting of contractor significant safety incidents/accidents/near misses, ensuring most importantly that corrective actions have been taken. Perform cursory review/QA of Contractor’s Significant Incidence Reports (CSIRs) and OSHA Form 300s (Contractor’s Log of Work Related Injuries and Illnesses).
• Serve as a point of contact for Supported Command interface/coordination in the field; including supporting collateral equipment installation and phone/data/communication connections; assist with investigation of potential latent defects; and assist with coordination of the installation of cylinders/cores, keying system, and turnover of keys to owner/occupant
• Coordinate the facility system training for owner/occupants/PW shop personnel.
• Review pre-final contract drawings and specifications (particularly Division 01 administrative requirements) and technical RFPs, respectively. Perform on-site visits to review constructability and compatibility with actual field conditions. During design development and constructability review, provide technical knowledge of local conditions, including availability of construction materials and skilled labor. For any problems found, make solution recommendations for designer consideration.

Qualifications:

• 5 or more years of verified experience as a Quality Control Manager working for one or more General Contractors (GCs) on NAVFAC or U.S. Army Corps of Engineers (ACOE) projects OR 10 or more years of verified foreman experience in one or more of the following trades: Concrete, Mechanical, Electrical, Masonry or Carpentry on commercial/industrial/military projects. Residential construction experience does not qualify.
• Possess, or be able to obtain, a Certificate of Completion for the US Army Corps of Engineers “Construction Quality Management [CQM] for Contractors” course
• Possess familiarity with crane safety requirements and the NAVFAC P-307 (Management of Weight Handling equipment) specification
• Must be able to successfully pass a drug test and a thorough background check for access onto a military installation; please note the background check for this position extends past 7 years, in conformance with federal law and US Department of Justice guidelines for work on a military installation.

Miami Wiipica is an Equal Opportunity Employer.

• Maintain physical filing systems for QA documentation, including scanning, filing, archiving, and retrieval of controlled records.
• Issue controlled copies of GMP documents following established document control procedures.
• Support organization and archival activities for controlled documents, logbooks, forms, and training records.
• Ensure accuracy, completeness, and legibility of documents prior to filing or issuance.
• Maintain logs and trackers associated with document issuance and filing activities.
• Assist with the review of documents for formatting and compliance with document control expectations.
• Prepare and organize new GMP logbooks for issuance; collect completed logbooks for archival.
• Support QA team members with routine document control tasks as assigned.
• Escalate issues or discrepancies to QA leadership in a timely and appropriate manner.
• Ensure all activities are performed in accordance with GMP, ALCOA principles, and site Quality procedures.

• High school diploma required; Associate’s or Bachelor’s degree preferred.
• Experience working in a GMP or regulated environment preferred.
• Strong attention to detail and accuracy in handling documents and records.
• Ability to follow written procedures and maintain compliance with document control standards.
• Proficient with Microsoft Office (Word, Excel, Outlook).
• Ability to work independently, stay organized, and manage multiple tasks.
• Strong communication and interpersonal skills.
• Demonstrates professional behavior consistent with company policies and ethical standards.

 

Estimated Min Rate: $21.00
Estimated Max Rate: $30.00

What’s In It for You?
We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh’s network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh’s extensive talent community that will provide you with access to Yoh’s vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include:

• Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week)
• Health Savings Account (HSA) (for employees working 20+ hours per week)
• Life & Disability Insurance (for employees working 20+ hours per week)
• MetLife Voluntary Benefits
• Employee Assistance Program (EAP)
• 401K Retirement Savings Plan
• Direct Deposit & weekly epayroll
• Referral Bonus Programs
• Certification and training opportunities

Note: Any pay ranges displayed are estimations. Actual pay is determined by an applicant's experience, technical expertise, and other qualifications as listed in the job description. All qualified applicants are welcome to apply.

Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Visit to contact us if you are an individual with a disability and require accommodation in the application process.

For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment.

It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh’s hiring clients’ preferences. To learn more about Yoh’s privacy practices, please see our Candidate Privacy Notice: