✓ Engineering ✕ Clear
Engineering Jobs in Olathe Ks Remote
46 positions found — Page 3
B
Manufacturing Engineer
Salary not disclosed
Manufacturing Engineer Location: Lenexa, KS Job ID: #72185 Duration: 6-12 months contract Pay Range: $40-48.50
- W2 hourly Job Description: This position is for a Manufacturing Engineer that performs conventional to advanced engineering assignments applying concepts, techniques, analysis, and decision tools to promote and implement changes in manufacturing operations.
Checks manufacturability of existing products and implements manufacturing processes and changes to improve products and reduce costs.
Primary Responsibilities
* Performs Manufacturing Engineering assignments under general direction and supervision.
* Use DFM Techniques to assist Product Engineering on the development of new products and the redesign of existing products.
* Develops routings and labor standards and updates the ERP System.
* Writes and/or modifies manufacturing work instructions and acceptance test procedures.
* Plans the sequence of operations and procedures and documents manufacturing standard work and routing.
* Designs systems, processes and equipment to increase efficiency, decrease costs, and improve the quality and reliability of product.
* Design tools and fixtures for production and acceptance testing.
* Designs and modifies small cell or simple assembly lines within plant facilities to ensure most efficient and productive layout.
* Designs and implements complex manufacturing processes that are applicable to statistical process control to ensure compliance and effective production.
* Improve facilities layout of production floor space to establish maximum utilization of equipment considering economic factors, process flow, and operator efficiency and comfort.
* Monitors and ensures mandatory modifications, programs, and bulletins are incorporated or complied with, as required by the customer and the applicable regulatory requirements, to ensure legal compliance and adherence to quality standards.
* Identifies opportunities or implements changes, on a need basis, to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product design, materials and parts to optimize productivity and ensure optimal use of resources.
* Audits manufacturability of existing products, and recommends modifications or adaptations to address quality, customer, product, or productivity constraints.
* Conducts tests and measurements throughout stages of production to determine control over applicable variables; and services, troubleshoots and solves production process problems with processes or equipment already in operation.
* Conducts analysis of manufacturing processes and equipment to diagnose failures.
* Analyze customer returns for root cause and leads corrective action efforts in cooperation with Product Engineering.
* Develops and updates PFMEAs.
* Conduct studies pertaining to cost control, cost reduction, inventory control through the application of Lean principles.
* Prepare cost estimates for proposed projects and provide cost benefit analysis by evaluating cost factors and schedules.
Plan, execute, and document engineering economic challenges.
* Maintain awareness of start-of-the-art technology and the applicability of how it can be leveraged to improve the Company's competitive position in the assigned area.
* Develop tools that enable manufacturing, aid process improvement or address safety concerns.
* Research new processes, methods, and equipment and make recommendations to achieve continuous improvement in assigned areas of the factory.
* Design, develop, and improve station loading/line balancing.
* Create and maintain a factory staffing plan based on sales demand.
Preferred Qualifications:
* Proficient in Microsoft Excel.
* AutoCAD 2D experience is required
* Experience with Fluid Power and Mechanical Systems, and Lean Manufacturing Principles
* Ability to read and interpret engineering drawings, specifications, and technical data
* Must have strong analytical and mechanical troubleshooting skills.
* Lean Manufacturing experience is preferred
* Siemens NX experience is preferred Education: Bachelor's degree (in Mechanical, Aerospace, or Industrial Engineering) with 2+ yrs experience.
Experience: Proficient Excel skills, firm understanding of DFM Techniques, ERP System experience Schedule: M-F 5x8 hr days.
There is voluntary OT as needed to meet critical deadlines on certain projects.
Interviews: 30 min Zoom US Citizen and US Person candidates permitted Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law.
Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at #ZR
- W2 hourly Job Description: This position is for a Manufacturing Engineer that performs conventional to advanced engineering assignments applying concepts, techniques, analysis, and decision tools to promote and implement changes in manufacturing operations.
Checks manufacturability of existing products and implements manufacturing processes and changes to improve products and reduce costs.
Primary Responsibilities
* Performs Manufacturing Engineering assignments under general direction and supervision.
* Use DFM Techniques to assist Product Engineering on the development of new products and the redesign of existing products.
* Develops routings and labor standards and updates the ERP System.
* Writes and/or modifies manufacturing work instructions and acceptance test procedures.
* Plans the sequence of operations and procedures and documents manufacturing standard work and routing.
* Designs systems, processes and equipment to increase efficiency, decrease costs, and improve the quality and reliability of product.
* Design tools and fixtures for production and acceptance testing.
* Designs and modifies small cell or simple assembly lines within plant facilities to ensure most efficient and productive layout.
* Designs and implements complex manufacturing processes that are applicable to statistical process control to ensure compliance and effective production.
* Improve facilities layout of production floor space to establish maximum utilization of equipment considering economic factors, process flow, and operator efficiency and comfort.
* Monitors and ensures mandatory modifications, programs, and bulletins are incorporated or complied with, as required by the customer and the applicable regulatory requirements, to ensure legal compliance and adherence to quality standards.
* Identifies opportunities or implements changes, on a need basis, to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product design, materials and parts to optimize productivity and ensure optimal use of resources.
* Audits manufacturability of existing products, and recommends modifications or adaptations to address quality, customer, product, or productivity constraints.
* Conducts tests and measurements throughout stages of production to determine control over applicable variables; and services, troubleshoots and solves production process problems with processes or equipment already in operation.
* Conducts analysis of manufacturing processes and equipment to diagnose failures.
* Analyze customer returns for root cause and leads corrective action efforts in cooperation with Product Engineering.
* Develops and updates PFMEAs.
* Conduct studies pertaining to cost control, cost reduction, inventory control through the application of Lean principles.
* Prepare cost estimates for proposed projects and provide cost benefit analysis by evaluating cost factors and schedules.
Plan, execute, and document engineering economic challenges.
* Maintain awareness of start-of-the-art technology and the applicability of how it can be leveraged to improve the Company's competitive position in the assigned area.
* Develop tools that enable manufacturing, aid process improvement or address safety concerns.
* Research new processes, methods, and equipment and make recommendations to achieve continuous improvement in assigned areas of the factory.
* Design, develop, and improve station loading/line balancing.
* Create and maintain a factory staffing plan based on sales demand.
Preferred Qualifications:
* Proficient in Microsoft Excel.
* AutoCAD 2D experience is required
* Experience with Fluid Power and Mechanical Systems, and Lean Manufacturing Principles
* Ability to read and interpret engineering drawings, specifications, and technical data
* Must have strong analytical and mechanical troubleshooting skills.
* Lean Manufacturing experience is preferred
* Siemens NX experience is preferred Education: Bachelor's degree (in Mechanical, Aerospace, or Industrial Engineering) with 2+ yrs experience.
Experience: Proficient Excel skills, firm understanding of DFM Techniques, ERP System experience Schedule: M-F 5x8 hr days.
There is voluntary OT as needed to meet critical deadlines on certain projects.
Interviews: 30 min Zoom US Citizen and US Person candidates permitted Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law.
Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at #ZR
Not Specified
T
Automation Controls Engineer
Salary not disclosed
The primary purpose of the Automation Controls Engineer is to provide automation support to the facility in the electrical, instrumentation and controls disciplines primarily for batch and continuous processes and packaging systems.
The individual will work with electrical and mechanical maintenance, operations, safety, and QA personnel to help deliver business objectives utilizing their technical skills to contribute.
KEY RESPONSIBILITIES Troubleshooting and determining root cause of faulted process and packaging instrumentation and electrical devices, including programmable logic controllers (PLC’s) and associated I/O modules.
Ability to understand and troubleshoot PLC, human machine interface (HMI), batching systems, and data collection system software Performing software modifications to existing packaging machinery and process system PLC’s, HMI’s, Batching and Data Collection systems Providing automation support for plant innovations EXPERIENCE/QUALIFICATIONS Proficient in programming and troubleshooting Siemens S7-300, S7-1500, and PCS7 systems using Step 7, TIA Portal, and SCL, including advanced features such as PID loops, SFCs, and CFCs Skilled in Allen-Bradley ControlLogix and CompactLogix PLCs using Studio 5000 / RSLogix 5000, with experience in Structured Text, Ladder Logic, Function Block Diagrams, and Add-On Instructions (AOIs) Knowledge of Siemens ET200S I/O and Rockwell 1756 ControlLogix I/O and POINT I/O (1734 series) Experienced in configuring and maintaining industrial communication networks including EtherNet/IP, Profibus, Profinet, DeviceNet, ControlNet, AS-i, and HART Proficient in developing and troubleshooting HMI applications using Siemens WinCC and Rockwell FactoryTalk View ME/SE Familiar with Siemens Batch Flexible and Rockwell FactoryTalk Batch systems Experience with Siemens Process Historian and Rockwell FactoryTalk Historian, including SQL database troubleshooting and data integration Ability to read, interpret, and modify electrical schematics, one-line diagrams, PFDs, and P&IDs Strong understanding of AC/DC motor control, including Siemens Micromaster, Simocode, and Rockwell PowerFlex VFDs, as well as servo systems like Kinetix Skilled in configuring and troubleshooting process instrumentation (pressure, temperature, flow, conductivity sensors) and discrete sensing devices (photo eyes, proximity sensors, motion detectors, barcode scanners) Experience with vision systems such as Cognex, and Keyence.
Proficient in robotics integration, including Fanuc robot programming and troubleshooting Familiar with virtualized environments, including VMware and Rockwell ThinManager for managing HMI and control system infrastructure Experienced in OT network architecture, including segmentation, VLAN configuration, managed switches, and firewall integration for secure and reliable machine communication Understanding of industrial cybersecurity best practices, including network hardening, user access control, patch management, and compliance with standards such as ISA/IEC 62443 REQUIREMENTS Bachelors Degree in Automation or Controls Engineering Required
The individual will work with electrical and mechanical maintenance, operations, safety, and QA personnel to help deliver business objectives utilizing their technical skills to contribute.
KEY RESPONSIBILITIES Troubleshooting and determining root cause of faulted process and packaging instrumentation and electrical devices, including programmable logic controllers (PLC’s) and associated I/O modules.
Ability to understand and troubleshoot PLC, human machine interface (HMI), batching systems, and data collection system software Performing software modifications to existing packaging machinery and process system PLC’s, HMI’s, Batching and Data Collection systems Providing automation support for plant innovations EXPERIENCE/QUALIFICATIONS Proficient in programming and troubleshooting Siemens S7-300, S7-1500, and PCS7 systems using Step 7, TIA Portal, and SCL, including advanced features such as PID loops, SFCs, and CFCs Skilled in Allen-Bradley ControlLogix and CompactLogix PLCs using Studio 5000 / RSLogix 5000, with experience in Structured Text, Ladder Logic, Function Block Diagrams, and Add-On Instructions (AOIs) Knowledge of Siemens ET200S I/O and Rockwell 1756 ControlLogix I/O and POINT I/O (1734 series) Experienced in configuring and maintaining industrial communication networks including EtherNet/IP, Profibus, Profinet, DeviceNet, ControlNet, AS-i, and HART Proficient in developing and troubleshooting HMI applications using Siemens WinCC and Rockwell FactoryTalk View ME/SE Familiar with Siemens Batch Flexible and Rockwell FactoryTalk Batch systems Experience with Siemens Process Historian and Rockwell FactoryTalk Historian, including SQL database troubleshooting and data integration Ability to read, interpret, and modify electrical schematics, one-line diagrams, PFDs, and P&IDs Strong understanding of AC/DC motor control, including Siemens Micromaster, Simocode, and Rockwell PowerFlex VFDs, as well as servo systems like Kinetix Skilled in configuring and troubleshooting process instrumentation (pressure, temperature, flow, conductivity sensors) and discrete sensing devices (photo eyes, proximity sensors, motion detectors, barcode scanners) Experience with vision systems such as Cognex, and Keyence.
Proficient in robotics integration, including Fanuc robot programming and troubleshooting Familiar with virtualized environments, including VMware and Rockwell ThinManager for managing HMI and control system infrastructure Experienced in OT network architecture, including segmentation, VLAN configuration, managed switches, and firewall integration for secure and reliable machine communication Understanding of industrial cybersecurity best practices, including network hardening, user access control, patch management, and compliance with standards such as ISA/IEC 62443 REQUIREMENTS Bachelors Degree in Automation or Controls Engineering Required
Not Specified
B
Test Scorer - Remote
Salary not disclosed
BCforward is currently seeking Test Scorer in EST and CST zones.
Position Title: Test Evaluator (Remote EST/CST)
Location: Remote (Only EST & CST)
Anticipated Start Date: ASAP
Duration: 2 months
Job Type: Contract
Shift: Monday-Friday 8:30am-4:00pm
Note: Must have bachelor's degree from accredited university and must have own equipment (Computer/laptop) with Good Internet Connectivity to WFH.
Pay Rate: $18.00/hr. on W2.
Note: Must successfully pass an initial assessment
Position Overview:
The Test Scoring/Reader position involves hand-scoring tests that contain constructed responses, such as essays, math problems requiring shown work, or written answers. These responses must be scored by a live person because they cannot be evaluated mechanically.
Tests may be completed online. For online tests, scorers log into the system to review and score responses.
Scoring is based on criteria established by each State Department of Education. You will be trained in these standards and scoring methods. The first one to two days of each project are dedicated to training. At the end of training, you must pass a qualifying test to demonstrate your ability to score accurately.
Test Scorers/Readers work in a classroom-style environment led by a Scoring Director who conducts training and overseas operations.
You must be able to work the full schedule each week, as exceptions cannot be made for other commitments. The company offers a casual work environment and pleasant atmosphere.
Job Requirements:
· Bachelor's degree from an accredited university (diploma or official transcripts required)
· Ability to work the entire duration of the project
· Comfortable working at a desk and on a computer all day
· No absences permitted during the first week for any reason
Computer Requirements:
· Laptop or desktop computer
· High-speed internet
· Google Chrome
· Audio, video, and microphone capabilities
· Quiet workspace
Remote working/work at home options are available for this role.
Not Specified
N
O&G Terminals Controls Engineer - Remote/Travel
Salary not disclosed
Position Summary: Remote/Office based with up to 25% travel Need to be located in MST or CST Timezone HFS Midstream is seeking an experienced Controls Engineer to support product distribution terminals across our enterprise.
This role focuses on the design, construction, and modification of pipeline and terminal facilities, with an emphasis on electrical and instrumentation systems(PLC's, ProLogic, Flow Meters, Acculode to Multilode) at the terminals.
The Engineer will serve as a technical specialist, developing scopes of work, engineering designs, and collaborating with interdisciplinary teams to deliver safe, efficient, and compliant projects.
Essential Duties and Responsibilities • System Design & Modification: Engineer electrical and instrumentation systems for new facilities and upgrades to existing pipeline and terminal infrastructure.
Does not need an expert in CAD • Standards Compliance: Apply NEC, NFPA, API standards, and other applicable codes to ensure safe and reliable operations.
• Control Systems Integration: Design and implement process control systems, including SCADA, PLCs, Terminal Management Systems, IT/OT considerations, and hazardous area classifications.
• Technical Documentation: Develop logic diagrams, cause-and-effect matrices, control narratives, and detailed wiring and termination drawings.
• Project Scoping: Define technical requirements and scope of work in collaboration with stakeholders.
• Electrical Engineering: Design low- and medium-voltage power distribution systems, control circuits, and instrumentation wiring for PLC's and Flow Meters.
Currently using Acculode • Procurement & Costing: Prepare equipment specifications, procurement packages, and cost estimates for budgeting purposes.
• Operational Support: Troubleshoot technical issues and assist with commissioning and Pre-Startup Safety Reviews (PSSR).
• Vendor Coordination: Review and evaluate vendor proposals for equipment purchases and modernization projects.
• Continuous Improvement: Stay current with emerging technologies and best practices in electrical and instrumentation engineering.
Experience: • Minimum 5 years of industrial experience in electrical and instrumentation design for pipeline and terminal facilities.
• Proficiency in electrical schematics, wiring diagrams, conduit layouts, instrumentation loops, and PLC hardware.
• Experience selecting electrical equipment for classified areas.
Preferred: • Professional Engineer (PE) registration.
Education: • Bachelor's degree in Electrical Engineering or Controls Engineering (or equivalent).
• Ten years of applicable experience preferred.
Skills and Competencies • Ability to interpret P&IDs, electrical one-line diagrams, and instrument drawings.
• Expertise in hazardous location wiring practices, panel design, and PLC hardware.
• Strong communication, organizational, and time-management skills.
• Advanced mathematical and analytical capabilities.
• Preferred: Familiarity with Toptech and DTN loading systems.
Work Conditions • Office/Remote-based with up to 25% travel.
• Exposure to varying weather conditions; ability to work outdoors.
• Physical requirements include lifting up to 50 lbs, climbing up to 200 ft, and working in confined spaces.
Remote working/work at home options are available for this role.
This role focuses on the design, construction, and modification of pipeline and terminal facilities, with an emphasis on electrical and instrumentation systems(PLC's, ProLogic, Flow Meters, Acculode to Multilode) at the terminals.
The Engineer will serve as a technical specialist, developing scopes of work, engineering designs, and collaborating with interdisciplinary teams to deliver safe, efficient, and compliant projects.
Essential Duties and Responsibilities • System Design & Modification: Engineer electrical and instrumentation systems for new facilities and upgrades to existing pipeline and terminal infrastructure.
Does not need an expert in CAD • Standards Compliance: Apply NEC, NFPA, API standards, and other applicable codes to ensure safe and reliable operations.
• Control Systems Integration: Design and implement process control systems, including SCADA, PLCs, Terminal Management Systems, IT/OT considerations, and hazardous area classifications.
• Technical Documentation: Develop logic diagrams, cause-and-effect matrices, control narratives, and detailed wiring and termination drawings.
• Project Scoping: Define technical requirements and scope of work in collaboration with stakeholders.
• Electrical Engineering: Design low- and medium-voltage power distribution systems, control circuits, and instrumentation wiring for PLC's and Flow Meters.
Currently using Acculode • Procurement & Costing: Prepare equipment specifications, procurement packages, and cost estimates for budgeting purposes.
• Operational Support: Troubleshoot technical issues and assist with commissioning and Pre-Startup Safety Reviews (PSSR).
• Vendor Coordination: Review and evaluate vendor proposals for equipment purchases and modernization projects.
• Continuous Improvement: Stay current with emerging technologies and best practices in electrical and instrumentation engineering.
Experience: • Minimum 5 years of industrial experience in electrical and instrumentation design for pipeline and terminal facilities.
• Proficiency in electrical schematics, wiring diagrams, conduit layouts, instrumentation loops, and PLC hardware.
• Experience selecting electrical equipment for classified areas.
Preferred: • Professional Engineer (PE) registration.
Education: • Bachelor's degree in Electrical Engineering or Controls Engineering (or equivalent).
• Ten years of applicable experience preferred.
Skills and Competencies • Ability to interpret P&IDs, electrical one-line diagrams, and instrument drawings.
• Expertise in hazardous location wiring practices, panel design, and PLC hardware.
• Strong communication, organizational, and time-management skills.
• Advanced mathematical and analytical capabilities.
• Preferred: Familiarity with Toptech and DTN loading systems.
Work Conditions • Office/Remote-based with up to 25% travel.
• Exposure to varying weather conditions; ability to work outdoors.
• Physical requirements include lifting up to 50 lbs, climbing up to 200 ft, and working in confined spaces.
Remote working/work at home options are available for this role.
Not Specified
D
Engineer, Quality Complaint Investigation (CAPA) - Hybrid
Salary not disclosed
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title
- Engineer, Quality Complaint Investigation (CAPA)
- Hybrid Duration: 9 Months Location: Hybrid at Skaneateles, NY Local candidates preferred Will consider relocation candidates Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: I.
SUMMARY: This description outlines the employment prerequisites and job responsibilities for the position of Engineer, Quality Complaint Investigation.
II.
ESSENTIAL FUNCTIONS: This position has primary responsibility for investigation, review, and completion of all Quality Engineering complaint issue analysis tasks utilizing various quality system inputs.
Review individual complaints and associated service data to determine risk level and complete investigation into the as determined problem code and cause codes for each complaint.
Analyze data from various quality inputs (including but not limited to: Field Corrective Action (FCA), Complaints, FDA Medical Device Reports (MDR), etc.) to determine trends and systemic issues.
Prepare and issue reports based on information analysis.
Review existing investigation reports and identify gaps for GMP compliance.
Develop strategies and plans to close the gaps in an efficient and technical manner.
Develop and communicate expectations for quality performance, continuous improvement, and process controls for marketed products.
Monitor and drive corrective action and continuous improvement activities that directly impact performance measures by performing primary investigations, conducting data analysis, and implementing corrective actions.
Conduct or lead corrective and preventive actions in manufacturing using formal problem-solving tools and documentation.
Support CAPA and maintenance activities for existing product lines.
Recommend and/or support projects for improvements to the quality system as approved by management.
III.
QUALIFICATIONS, KNOWLEDGE, AND SKILLS REQUIRED Medical Device Experience with knowledge of 21CFR820 preferred.
Investigational research skills Experience with any statistical software packages (Minitab a plus) Desired experience in the medical device industry in the development and deployment of Quality Systems, process controls, and continuous improvement methods.
Knowledge and working application of FDA cGMP; ANSI/ISO/ASQC requirements; CMDAS (optional).
Knowledge and working application of reading and understanding blueprints and technical drawings.
Demonstrated strong analytical problem-solving (Root Cause Investigations.
Display a solid technical understanding of engineering principles and procedures (e.g., CAD and its application or scheduling a series of technical tasks utilizing software-based tools).
Computer competency in Word, Excel, PowerPoint, Minitab, Access, and databases.
Ability to multitask and methodically manage projects.
IV.
EDUCATION/EXPERIENCE REQUIRED A Bachelor of Science degree in Engineering 1-3 years of Medical Device experience V.
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee: Must be able to sit for long periods of time Must have good hand-to-eye coordination and dexterity Physical Requirements: Dynamic Lifting capability: Must have the ability to lift 40 pounds at a time.
VI.
WORK ENVIRONMENT Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
This is a manufacturing environment regulated by the FDA and many other work rules to prevent damage to the product we manufacture.
Some of those work rules include, but are not limited to: Wearing a static protective smock at all times while in the work area Wearing a ground wrist strap and plugging that wrist strap into the working table.
Working in proximity to other employees.
Working in an environment that is temperature and humidity-controlled.
Responsibilities: Will be addressing customer complaints and leading complaints investigation.
Identify RCA.
Collaborates with the Engineer, Product service teams and follow-up on service updates.
Quality experience is preferred 2 years would be ideal.
Good to have experience in technical writing and handling class ii medical device.
Will be writing customer feedback letter addressing customer issues and root-cause findings.
Will support the functions of NCQ, CAPA, Audit.
Current team has 2 perm, 3 contract, backfill will be for the 3rd.
Getting about 1000 complaints a month, want to keep it less than 100 actions a week.
Looking for a good communicator who is good at follow-ups.
Proficiency with SAP, ETQ, Trackwise will be preferred.
Will be onsite for Team meeting, addressing complaints, once a month data trending, warehouse visits when required.
Education: Bachelors is a must have.
Interview: Remote/ virtual screening with final onsite interview.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
SAP, Medical Device, Quality Systems, EtQ
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title
- Engineer, Quality Complaint Investigation (CAPA)
- Hybrid Duration: 9 Months Location: Hybrid at Skaneateles, NY Local candidates preferred Will consider relocation candidates Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: I.
SUMMARY: This description outlines the employment prerequisites and job responsibilities for the position of Engineer, Quality Complaint Investigation.
II.
ESSENTIAL FUNCTIONS: This position has primary responsibility for investigation, review, and completion of all Quality Engineering complaint issue analysis tasks utilizing various quality system inputs.
Review individual complaints and associated service data to determine risk level and complete investigation into the as determined problem code and cause codes for each complaint.
Analyze data from various quality inputs (including but not limited to: Field Corrective Action (FCA), Complaints, FDA Medical Device Reports (MDR), etc.) to determine trends and systemic issues.
Prepare and issue reports based on information analysis.
Review existing investigation reports and identify gaps for GMP compliance.
Develop strategies and plans to close the gaps in an efficient and technical manner.
Develop and communicate expectations for quality performance, continuous improvement, and process controls for marketed products.
Monitor and drive corrective action and continuous improvement activities that directly impact performance measures by performing primary investigations, conducting data analysis, and implementing corrective actions.
Conduct or lead corrective and preventive actions in manufacturing using formal problem-solving tools and documentation.
Support CAPA and maintenance activities for existing product lines.
Recommend and/or support projects for improvements to the quality system as approved by management.
III.
QUALIFICATIONS, KNOWLEDGE, AND SKILLS REQUIRED Medical Device Experience with knowledge of 21CFR820 preferred.
Investigational research skills Experience with any statistical software packages (Minitab a plus) Desired experience in the medical device industry in the development and deployment of Quality Systems, process controls, and continuous improvement methods.
Knowledge and working application of FDA cGMP; ANSI/ISO/ASQC requirements; CMDAS (optional).
Knowledge and working application of reading and understanding blueprints and technical drawings.
Demonstrated strong analytical problem-solving (Root Cause Investigations.
Display a solid technical understanding of engineering principles and procedures (e.g., CAD and its application or scheduling a series of technical tasks utilizing software-based tools).
Computer competency in Word, Excel, PowerPoint, Minitab, Access, and databases.
Ability to multitask and methodically manage projects.
IV.
EDUCATION/EXPERIENCE REQUIRED A Bachelor of Science degree in Engineering 1-3 years of Medical Device experience V.
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee: Must be able to sit for long periods of time Must have good hand-to-eye coordination and dexterity Physical Requirements: Dynamic Lifting capability: Must have the ability to lift 40 pounds at a time.
VI.
WORK ENVIRONMENT Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
This is a manufacturing environment regulated by the FDA and many other work rules to prevent damage to the product we manufacture.
Some of those work rules include, but are not limited to: Wearing a static protective smock at all times while in the work area Wearing a ground wrist strap and plugging that wrist strap into the working table.
Working in proximity to other employees.
Working in an environment that is temperature and humidity-controlled.
Responsibilities: Will be addressing customer complaints and leading complaints investigation.
Identify RCA.
Collaborates with the Engineer, Product service teams and follow-up on service updates.
Quality experience is preferred 2 years would be ideal.
Good to have experience in technical writing and handling class ii medical device.
Will be writing customer feedback letter addressing customer issues and root-cause findings.
Will support the functions of NCQ, CAPA, Audit.
Current team has 2 perm, 3 contract, backfill will be for the 3rd.
Getting about 1000 complaints a month, want to keep it less than 100 actions a week.
Looking for a good communicator who is good at follow-ups.
Proficiency with SAP, ETQ, Trackwise will be preferred.
Will be onsite for Team meeting, addressing complaints, once a month data trending, warehouse visits when required.
Education: Bachelors is a must have.
Interview: Remote/ virtual screening with final onsite interview.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
SAP, Medical Device, Quality Systems, EtQ
Remote working/work at home options are available for this role.
Not Specified
D
Sr Analytics Implementation Engineer (Web and Mobile) - Remote
🏢 DivIHN Integration Inc
Salary not disclosed
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact our Talent Specialist, Lavanya, at (224) 369-0873 Title: Sr Analytics Implementation Engineer (Web and Mobile)
- Remote Location: Remote Duration: 2 Months Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered Preferred Time Zone: Eastern or central preferred, but any US time zone is fine Purpose of Role The Analytics Technology branch of the Business Analytics Team focuses on data capture, tool administration, and data architecture/enablement of global web and mobile app data for client The mission of Analytics Technology is to govern, centralize, and democratize eComm data sources to enable a holistic view of our shoppers (not just buyers).
This foundation enables running analytics at scale, eComm insights, and advancing the capabilities of all analytics teams.
As an Analytics Engineer, you will: Support platform migration projects by preventing and resolving analytics tracking issues on websites and native apps.
Implement and enhance analytics tracking on all platforms.
Debug and troubleshoot configurations and integrations Adobe MobileSDK and Kotlin KMP, clearly communicating findings to responsible teams.
Lead or support the upgrade of analytics implementations ensuring data continuity, privacy compliance, and performance optimization.
QualificationsRequired Passionate about data and a champion for analytics governance and enablement to support 300 global business users.
Extensive experience with tag managers, specifically Tealium and Adobe Data Collection (Launch).
Skilled at performing and documenting beacon tests using Adobe Assurance, AEP Debugger, and Omnibug.
Reliable partner with strong communication and collaboration skills.
Expert at troubleshooting and debugging web/mobile analytics implementations.
Experience validating tagging implementations using Adobe Workspace.
Familiarity with data layers, tag management, processing rules, and mobile SDK context data variables.
Hands-on experience upgrading analytics implementations through platform and library transitions Differentiators Demonstrated experience in process improvement and documentation.
Experience with Kotlin Multiplatform for mobile analytics implementations or cross-platform tagging strategies.
Ability to create tagging business requirements and collaborate with developers.
Strong bridge between business and technical teams, with attention to detail.
Experience with workflow tools like Atlassian JIRA or Asana.
Experience extracting/analyzing hit-level data in SQL.
Working knowledge of Adobe Analytics reporting tools: Analysis Workspace, Data Warehouse, Processing Rules, and Classifications.
Experience with Kotlin Multiplatform for mobile analytics implementations or cross-platform tagging strategies Team Size: Our team has 3 existing people.
This engineer will work with Dev and Engineering teams as well.
Required Technologies: Adobe Experience Platform (AEP) Mobile SDK, AEP Assurance Preferred (Nice-to-Have) Technologies: Android development,iOS development, Kotlin Multiplatform (KMP), lifecycle and navigation-based tracking, Mobile data layer design Minimum Years of Experience Required: 3 Training Duration: 1-5 days, depending on experience.
We expect this person to contribute almost immediately Travel Requirements (If Any): None Interview Process: Group/individual interviews.
Possibly a questionnaire to pre-screen applicants About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
mobile SDK, Adobe Experience Platform
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact our Talent Specialist, Lavanya, at (224) 369-0873 Title: Sr Analytics Implementation Engineer (Web and Mobile)
- Remote Location: Remote Duration: 2 Months Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered Preferred Time Zone: Eastern or central preferred, but any US time zone is fine Purpose of Role The Analytics Technology branch of the Business Analytics Team focuses on data capture, tool administration, and data architecture/enablement of global web and mobile app data for client The mission of Analytics Technology is to govern, centralize, and democratize eComm data sources to enable a holistic view of our shoppers (not just buyers).
This foundation enables running analytics at scale, eComm insights, and advancing the capabilities of all analytics teams.
As an Analytics Engineer, you will: Support platform migration projects by preventing and resolving analytics tracking issues on websites and native apps.
Implement and enhance analytics tracking on all platforms.
Debug and troubleshoot configurations and integrations Adobe MobileSDK and Kotlin KMP, clearly communicating findings to responsible teams.
Lead or support the upgrade of analytics implementations ensuring data continuity, privacy compliance, and performance optimization.
QualificationsRequired Passionate about data and a champion for analytics governance and enablement to support 300 global business users.
Extensive experience with tag managers, specifically Tealium and Adobe Data Collection (Launch).
Skilled at performing and documenting beacon tests using Adobe Assurance, AEP Debugger, and Omnibug.
Reliable partner with strong communication and collaboration skills.
Expert at troubleshooting and debugging web/mobile analytics implementations.
Experience validating tagging implementations using Adobe Workspace.
Familiarity with data layers, tag management, processing rules, and mobile SDK context data variables.
Hands-on experience upgrading analytics implementations through platform and library transitions Differentiators Demonstrated experience in process improvement and documentation.
Experience with Kotlin Multiplatform for mobile analytics implementations or cross-platform tagging strategies.
Ability to create tagging business requirements and collaborate with developers.
Strong bridge between business and technical teams, with attention to detail.
Experience with workflow tools like Atlassian JIRA or Asana.
Experience extracting/analyzing hit-level data in SQL.
Working knowledge of Adobe Analytics reporting tools: Analysis Workspace, Data Warehouse, Processing Rules, and Classifications.
Experience with Kotlin Multiplatform for mobile analytics implementations or cross-platform tagging strategies Team Size: Our team has 3 existing people.
This engineer will work with Dev and Engineering teams as well.
Required Technologies: Adobe Experience Platform (AEP) Mobile SDK, AEP Assurance Preferred (Nice-to-Have) Technologies: Android development,iOS development, Kotlin Multiplatform (KMP), lifecycle and navigation-based tracking, Mobile data layer design Minimum Years of Experience Required: 3 Training Duration: 1-5 days, depending on experience.
We expect this person to contribute almost immediately Travel Requirements (If Any): None Interview Process: Group/individual interviews.
Possibly a questionnaire to pre-screen applicants About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
mobile SDK, Adobe Experience Platform
Remote working/work at home options are available for this role.
Not Specified
J
Process Piping Engineer - Remote- Direct hire!!
🏢 Jobot
Salary not disclosed
Process Piping Engineer
- Hybrid
- Direct hire!! This Jobot Job is hosted by: Brandon DeDeker Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $80,000
- $130,000 per year A bit about us: We are a boutique, progressive, and growing engineering and project management firm committed to delivering smart solutions that positively impact our clients' lives.
We are looking to add a piping designer to our growing piping group! Why join us? Exciting opportunity to work on a wide range of projects Collaborate with diverse teams of engineers from other disciplines and industries.
Manage projects to meet critical deadlines and engineering budgets.
Opportunity for professional growth and development.
Work with a team of exceptional individuals who share a passion for innovation and customer satisfaction.
Job Details Work with vendors, clients and the internal team to determine the piping design needs Responsibilities: Assist in designing and laying out projects under the guidance of a Lead Designer or Engineer.
Proficiently use AutoCAD Plant3D and/or Solid Edge for 3D modeling, utilizing provided Point Cloud 3D scans for engineering packages.
Create equipment layout, piping layout, general arrangement drawings, piping isometrics, and P&ID drawings.
Conduct fieldwork, including walk downs of current systems, locating tie-ins, and taking measurements.
Document detailed field notes that are easily understandable by others.
Design piping systems based on project scope using P&ID's and specifications, adhering to applicable design standards.
Review project parameters related to piping requirements.
Develop preliminary Bills of Materials for piping design.
Office-based work with occasional short-term field assignments.
Qualifications: Associates degree in mechanical/process design with 3-D modeling.
Preferred minimum of 8 years of experience.
Working knowledge of industry-standard drafting practices, good mechanical aptitude, and general knowledge of Piping Engineering.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Remote working/work at home options are available for this role.
- Hybrid
- Direct hire!! This Jobot Job is hosted by: Brandon DeDeker Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $80,000
- $130,000 per year A bit about us: We are a boutique, progressive, and growing engineering and project management firm committed to delivering smart solutions that positively impact our clients' lives.
We are looking to add a piping designer to our growing piping group! Why join us? Exciting opportunity to work on a wide range of projects Collaborate with diverse teams of engineers from other disciplines and industries.
Manage projects to meet critical deadlines and engineering budgets.
Opportunity for professional growth and development.
Work with a team of exceptional individuals who share a passion for innovation and customer satisfaction.
Job Details Work with vendors, clients and the internal team to determine the piping design needs Responsibilities: Assist in designing and laying out projects under the guidance of a Lead Designer or Engineer.
Proficiently use AutoCAD Plant3D and/or Solid Edge for 3D modeling, utilizing provided Point Cloud 3D scans for engineering packages.
Create equipment layout, piping layout, general arrangement drawings, piping isometrics, and P&ID drawings.
Conduct fieldwork, including walk downs of current systems, locating tie-ins, and taking measurements.
Document detailed field notes that are easily understandable by others.
Design piping systems based on project scope using P&ID's and specifications, adhering to applicable design standards.
Review project parameters related to piping requirements.
Develop preliminary Bills of Materials for piping design.
Office-based work with occasional short-term field assignments.
Qualifications: Associates degree in mechanical/process design with 3-D modeling.
Preferred minimum of 8 years of experience.
Working knowledge of industry-standard drafting practices, good mechanical aptitude, and general knowledge of Piping Engineering.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Remote working/work at home options are available for this role.
Not Specified
J
Civil Engineer (Water Resources, Modeling, HEC-RAS) - Remote/Hybrid
🏢 Jobot
Salary not disclosed
Experienced Water Resources Engineer needed to join a growing team! This Jobot Job is hosted by: Ryan Anderson Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $120,000
- $150,000 per year A bit about us: APPLY / RESPOND TO LEARN MORE!!! TOP CLIENT SEEKING TOP TALENT!!! MATT DESIDERIO (RECRUITING MANAGER) AT JOBOT />
*MY CLIENT IS OPEN TO A HYBRID/REMOTE SCHEDULE BUT CANDIDATES MUST BE REGIONAL TO LOUISIANA AS THERE WILL BE ON-SITE / IN OFFICE / MEETING REQUIREMENTS
* Why join us? APPLY / RESPOND TO LEARN MORE ABOUT MY CLIENT! TOTAL OFFERINGS INCLUDE BUT NOT LIMITED TO:
*Competitive Salary
*Medical / Dental / Vision
*Bonus Options
*Retirement Planning
*PTO / Holidays
*Top Culture
*Growth Opportunity Job Details HERE ARE SOME DETAILS MY CLIENT IS SEEKING IN THE RIGHT CANDIDATE(s)
*Civil Engineering Experience
*Ideally a PE Certified Civil Engineer
*Project Management
*Water Resources
*Stormwater
*Drainage
*Flood Planning
*Erosion Control
*CFM Please apply / respond to start the process and learn more about the role and my client Matt Desiderio (Recruiting Manager) at Jobot
*real human
* Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Remote working/work at home options are available for this role.
Salary: $120,000
- $150,000 per year A bit about us: APPLY / RESPOND TO LEARN MORE!!! TOP CLIENT SEEKING TOP TALENT!!! MATT DESIDERIO (RECRUITING MANAGER) AT JOBOT />
*MY CLIENT IS OPEN TO A HYBRID/REMOTE SCHEDULE BUT CANDIDATES MUST BE REGIONAL TO LOUISIANA AS THERE WILL BE ON-SITE / IN OFFICE / MEETING REQUIREMENTS
* Why join us? APPLY / RESPOND TO LEARN MORE ABOUT MY CLIENT! TOTAL OFFERINGS INCLUDE BUT NOT LIMITED TO:
*Competitive Salary
*Medical / Dental / Vision
*Bonus Options
*Retirement Planning
*PTO / Holidays
*Top Culture
*Growth Opportunity Job Details HERE ARE SOME DETAILS MY CLIENT IS SEEKING IN THE RIGHT CANDIDATE(s)
*Civil Engineering Experience
*Ideally a PE Certified Civil Engineer
*Project Management
*Water Resources
*Stormwater
*Drainage
*Flood Planning
*Erosion Control
*CFM Please apply / respond to start the process and learn more about the role and my client Matt Desiderio (Recruiting Manager) at Jobot
*real human
* Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Remote working/work at home options are available for this role.
Not Specified
O
Testing Data Engineer, Remote EST
Salary not disclosed
Testing Data Engineer Fully Remote, Core hours 9am
- 5pm EST Skill set includes: Expertise on Mainframe Systems Test Management Data Analytics Mainframe Database and Data Structure Skilled in Debugging Agile (Scrum / Kanban) JIRA
Remote working/work at home options are available for this role.
- 5pm EST Skill set includes: Expertise on Mainframe Systems Test Management Data Analytics Mainframe Database and Data Structure Skilled in Debugging Agile (Scrum / Kanban) JIRA
Remote working/work at home options are available for this role.
Not Specified
J
Sr. Mechanical Engineer - Hybrid
🏢 Jobot
Salary not disclosed
Senior Mechanical Engineer PE
- (Healthcare Projects)
- Hybrid This Jobot Job is hosted by: Tony Barhoum Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $130,000
- $155,000 per year A bit about us: Award Winning Engineering Consulting firm with over 10 offices Nationwide.
For over 70 years we consistently ranked among the largest MEP and structural engineering firms in the country, we are an industry leader with expertise in diverse markets, from education to healthcare to aviation.
We are dedicated to meeting our clients' M.E.P.
engineering needs by providing architectural lighting and mechanical systems design, building commissioning services, technology systems design, life support systems engineering, and fire protection engineering.
Our two generations of technical expertise, combined with our business partnerships and the latest software and MEP technology, have earned us industry admiration, partner respect, and client loyalty.
Why join us? Benefits: Meaningful and Impactful Work! Competitive Base Salary! Competitive Bonus Package! Complete Benefits Package! Flexible Work Schedules! Accelerated Career Growth! Fun Company Activities! Job Details Senior Mechanical Engineer PE
- (Healthcare Projects)
- Hybrid Salary: $130K to $155K (Total Comp $140K to $165K) A well-established engineering consulting firm in Philadelphia is seeking a Mid to Senior Level Mechanical Engineer with a strong background in mission-critical projects, particularly within the healthcare and pharmaceutical sectors.
The ideal candidate will be responsible for leading mechanical design efforts, ensuring compliance with industry standards, and delivering high-quality solutions for complex building systems.
PE License Preferred Bachelor’s Degree in Mechanical Engineering from ABET Accredited College or University Security Clearance Preferred, Not Required 8 to 10+ years of experience with an MEP or Engineering Consulting firm designing HVAC building systems on complex projects Proficient in Revit and AutoCAD Proven Project experience in Healthcare Projects (Hospitals, Labs, etc.) etc.
Develop HVAC designs from concept through completion of construction.
Coordinate HVAC design requirements with architecture, structure, and other disciplines.
Prepare engineering design calculations and mechanical system layouts, and detailed engineering reports and narratives.
Experience with direct client contact and fostering those relationships.
Assist in developing project objectives, goals, and documentation policies.
Support business development initiatives by assisting the RFP process and interview process.
Actively engage in community and/or industry-specific organizations.
Desired, Not Required Experience and interest in Sustainable Building Design LEED AP or LEED GA with previous experience participating in the LEED or other green rating system process.
An appreciation and understanding of architectural design and how architects work and think.
BENEFITS Hybrid Work & Flexible Schedules Competitive Salary & Bonuses! Full Benefits Package! 401K Plan with Competitive Match Professional Development, Tuition & Certification Reimbursement Accelerated Career Growth! If Interested, Please Apply or Email Me Your Resume Directly at: /> Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Remote working/work at home options are available for this role.
- (Healthcare Projects)
- Hybrid This Jobot Job is hosted by: Tony Barhoum Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $130,000
- $155,000 per year A bit about us: Award Winning Engineering Consulting firm with over 10 offices Nationwide.
For over 70 years we consistently ranked among the largest MEP and structural engineering firms in the country, we are an industry leader with expertise in diverse markets, from education to healthcare to aviation.
We are dedicated to meeting our clients' M.E.P.
engineering needs by providing architectural lighting and mechanical systems design, building commissioning services, technology systems design, life support systems engineering, and fire protection engineering.
Our two generations of technical expertise, combined with our business partnerships and the latest software and MEP technology, have earned us industry admiration, partner respect, and client loyalty.
Why join us? Benefits: Meaningful and Impactful Work! Competitive Base Salary! Competitive Bonus Package! Complete Benefits Package! Flexible Work Schedules! Accelerated Career Growth! Fun Company Activities! Job Details Senior Mechanical Engineer PE
- (Healthcare Projects)
- Hybrid Salary: $130K to $155K (Total Comp $140K to $165K) A well-established engineering consulting firm in Philadelphia is seeking a Mid to Senior Level Mechanical Engineer with a strong background in mission-critical projects, particularly within the healthcare and pharmaceutical sectors.
The ideal candidate will be responsible for leading mechanical design efforts, ensuring compliance with industry standards, and delivering high-quality solutions for complex building systems.
PE License Preferred Bachelor’s Degree in Mechanical Engineering from ABET Accredited College or University Security Clearance Preferred, Not Required 8 to 10+ years of experience with an MEP or Engineering Consulting firm designing HVAC building systems on complex projects Proficient in Revit and AutoCAD Proven Project experience in Healthcare Projects (Hospitals, Labs, etc.) etc.
Develop HVAC designs from concept through completion of construction.
Coordinate HVAC design requirements with architecture, structure, and other disciplines.
Prepare engineering design calculations and mechanical system layouts, and detailed engineering reports and narratives.
Experience with direct client contact and fostering those relationships.
Assist in developing project objectives, goals, and documentation policies.
Support business development initiatives by assisting the RFP process and interview process.
Actively engage in community and/or industry-specific organizations.
Desired, Not Required Experience and interest in Sustainable Building Design LEED AP or LEED GA with previous experience participating in the LEED or other green rating system process.
An appreciation and understanding of architectural design and how architects work and think.
BENEFITS Hybrid Work & Flexible Schedules Competitive Salary & Bonuses! Full Benefits Package! 401K Plan with Competitive Match Professional Development, Tuition & Certification Reimbursement Accelerated Career Growth! If Interested, Please Apply or Email Me Your Resume Directly at: /> Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Remote working/work at home options are available for this role.
Not Specified
jobs by
✓ All jobs loaded