Engineering Jobs in None, CA

Lead and provide design engineering expertise for racecar vehicle design projects supporting HRC’s pinnacle and grassroots motorsports programs. This role is responsible for creating and analyzing design concepts, CAD models, and drawings, interpreting test results, planning and completing assigned engineering projects, and mentoring engineers.

Technical Direction & Mentorship: Develop team capabilities, promote collaboration, manage conflict, provide feedback, and optimize resources.

Design Leadership: Lead design activities for subsystem prototype validation.

Strategic Planning & Team Development: Implement mid- to long-term plans, set priorities, mentor associates, evaluate performance, prepare business plans and budgets, and coordinate cross-functional activities

Administration: Ensure timely reporting of design faults, manage vendors, and oversee project timelines.

Education: BS in Mechanical Engineering

Experience:

15+ years in motorsport vehicle design

10+ years in chassis design for professional motorsports

Technical project management experience

Extensive CAD modeling expertise (parametric modeling preferred)

Comprehensive knowledge of race car chassis and mechanical systems

Technical Skills:

Strong engineering principles and analytical skills

Knowledge of raw materials, machining, casting, and treatment processes

Proficient in CAD software and design documentation

Project management and problem-solving skills

Interpersonal Skills: Active listening, leadership, teamwork, flexibility

Physical Requirement: Ability to lift up to 30 lbs of vehicle components

• Mentor junior engineers and recommend design countermeasures
• Prioritize and delegate project assignments
• Analyze failures and determine root causes
• Approve prototype design revisions and weekly status reports
• Recommend cost-effective design concepts

Physical Demands Requirements:

Bending body downward and forward by bending spine at the waist while working.

Bending legs at knee to come to a rest on knee or knees to work on close to the groundwork.

Crawling.

Moving about on hands and knees or hands and feet to work underneath suspended vehicles/engines/equipment to diagnosis problems and or remove replace parts.

Standing for sustained periods during work or events.

Sitting. Extensive travel and long travels.

Walking. Moving about on foot to accomplish tasks (particularly walking long distances at the track to pit lane and around shop) 

Lifting. Raising objects of 25 pounds from a lower to a higher position or moving objects horizontally from position-to-position.

Repetitive motion. Substantial movements (motions) of the wrists, hands, and/or fingers while servicing / maintaining a race engine, vehicles and equipment.

The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat and exposure to chemicals.

Emotional Requirements:

Make quick decisions

Hazard awareness, aware of surroundings

Planning and problem-solving

Coping with change and other people

The Electrical Design Contingent Engineer will support company projects by performing electrical design activities, collaborating cross‑functionally, and ensuring all design solutions meet performance, cost, manufacturing, and timeline targets. This role requires hands‑on involvement in design, prototyping, assembly trials, and coordination with internal teams and external suppliers.

Conduct electrical design activities in support of company project requirements. Develop new or improved designs, including 3D modeling and 2D drawings, incorporating modern technologies, industry trends, manufacturability, environmental considerations, cost, and ease of assembly. Recommend optimized design solutions to solve problems or reduce cost while meeting performance and project targets. Perform engineering hand calculations where needed (e.g., beam bending, pressure drop). Understand and apply creepage and clearance methodologies for high‑voltage components. Design wire harnesses; experience with harness layout in assembly design is a plus. Perform tolerance stack‑up calculations to ensure proper assembly under all part variances. Collaborate with other departments to ensure on‑time delivery of practical and optimized electrical design solutions. Participate in assembly trials, manufacturing trials, and vendor visits as needed, including business travel to track/HRC or other locations. Act as a liaison between Project Management and the Design Group Lead, ensuring clear communication of project history, issues, priorities, and targets. Provide critical updates and technical information to the electrical design team and group leads. Ensure BOM and pictorials are accurately maintained and updated according to project milestones. Follow up on problem reports for responsible parts and provide timely updates during weekly review meetings. Ensure designed components meet targets set by technical management, including performance, durability, weight, cost, manufacturing, and assembly. Report design errors clearly and promptly; actively review work in progress to ensure deadlines are met. Support Design for Manufacturing (DFM) activities and perform drawing content checks prior to ECN submission.

Cross‑Functional Engagement: Collaborate proactively with: Project Management; Development & Simulation teams; External suppliers; QA / Assembly Shop, Machine Shop

Provide updates and solutions at mechanical, engineering, and problem‑report meetings. Support other 3D/2D component design activities beyond electrification as needed. Maintain accountability for delivering assigned tasks according to project timelines.

Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Mechatronics, or a related technical field. 3–5+ years of experience in electrical design engineering, ideally in automotive, motorsports, aerospace, or related high‑performance industries. Proficiency in 3D CAD tools (CATIA V5/V6 or 3D Experience preferred). Strong understanding of high‑voltage electrical systems, including creepage and clearance requirements. Experience designing wire harnesses and electrical subsystems. Ability to perform engineering hand calculations and justify design decisions. Solid understanding of GD&T principles (preferred). Knowledge of DFM (Design for Manufacturing) practices and ability to collaborate closely with manufacturing teams. Ability to interpret and create engineering drawings, BOMs, and assembly documentation. Strong problem‑solving skills with the ability to troubleshoot design issues and develop effective solutions. Excellent communication skills for coordination with project managers, design leads, suppliers, and cross‑functional teams. Demonstrated ability to manage time, meet deadlines, and maintain accountability in a fast‑paced project environment. Willingness to travel to suppliers, test sites, or track locations as required.

Responsible to lead quality initiatives for pre-production builds and new product launches. This role ensures readiness through APQP methodologies, drives cross-functional corrective actions, and safeguards product conformity and process capability in a fast-paced environment.

Minimum 7–10 years of Quality Engineering experience with demonstrated leadership in cross‑functional problem solving, decision‑making, and supporting engineering, manufacturing, and new product development environments.

Must be proficient in statistical analysis software (e.g., Minitab, JMP, or equivalent.

Operates with minimal oversight, taking initiative and driving proactive problem resolution.

Collaborative team contributor with advanced analytical skills, proficiency in root‑cause analysis methodologies, and a data‑driven approach to decision making, building and leveraging Power BI for dashboard development and performance insights.

Strong project management and organizational capability, utilizing MS Project for scheduling and resource planning.

Communicate investigation findings, risk assessments, and recommended actions through formal technical presentations and reports. 

Familiarity with Six Sigma principles, DMAIC methodology, and data‑driven continuous improvement practices.

Proficient in the selection, calibration, and use of test and measurement equipment required for inspection, verification, and validation activities.

Knowledgeable in raw material specifications, supplier qualification, and vendor management, including incoming inspection and supplier performance monitoring.

Ability to read and interpret Geometric Dimensioning & Tolerancing (GD&T) per ASME Y14.5, including datum schemes and feature control frames.

Proficient in MS Office for technical reporting, KPI tracking, and documentation control.

Capable of using Minitab for statistical analysis (SPC, capability studies, DOE) and UniPoint for CAPA, NCR, and audit management.

Skilled in developing, analyzing, and presenting technical documentation, including control plans, inspection reports, and quality metrics.

Experience with 3D modeling and CMM metrology software for dimensional analysis, measurement validation, GD&T verification, and inspection.

• Define and develop Critical to Quality standards that address customer wants and needs.
• Equipment and software upgrade and replacement in the department as needed.
• Drive continuous improvement activities that reduce inspection time, streamline workflows, and improve quality throughput.

Physical Demands Requirements:

• Bending body downward and forward by bending spine at the waist while working.
• Bending legs at knee to come to a rest on knee or knees to work on close to the groundwork.
• Crawling.
• Moving about on hands and knees or hands and feet to work underneath suspended vehicles/engines/equipment to diagnosis problems and or remove replace parts.
• Standing for sustained periods during work or events.
• Sitting. Extensive travel and long travels.
• Walking. Moving about on foot to accomplish tasks (particularly walking long distances at the track to pit lane and around shop) 
• Lifting. Raising objects of 25 pounds from a lower to a higher position or moving objects horizontally from position-to-position.
• Repetitive motion. Substantial movements (motions) of the wrists, hands, and/or fingers while servicing / maintaining a race engine, vehicles and equipment.
• The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat and exposure to chemicals.

Emotional Requirements:

• Make quick decisions
• Hazard awareness, aware of surroundings
• Planning and problem-solving
• Coping with change and other people

KGS Group is looking for an Electrical Engineer to join our Bellevue, WA or Granite Bay, CA.

About Us

We are KGS Group, an employee-owned, multidisciplinary engineering consulting firm serving clients throughout North America. We’re different than traditional engineering firms. We believe a commitment to lasting relationships is just as critical as the expertise applied in our work. To us that means we put our clients and people first. We have the discipline to consistently deliver KGS Quality, never taking the easy way out. We always look closer and dig deeper. And no matter the project, we care enough to do it right.

As an employee-owned company, we’re invested in our work and our people. Working with us means you’ll be part of some of the most interesting projects up and down the west coast. With the extensive, wide-ranging expertise within our company, you’ll have countless opportunities to learn and grow.

Many of our core clients operate in the hydropower and water management fields. We are growing our U.S. team to continue to provide our industry-leading services to these clients. As we expand our presence on the west coast , we are looking for strong candidates at all levels to join our team!

The Role

As an Electrical Engineer, you will be responsible for providing engineering inputs integral to both small and large-scale hydro and dam projects. You will lead and mentor teams, support management of production and coordinate delivery of engineering work products often with multi-disciplinary project team members and external stakeholders. You will not only support and help grow the broader engineering team capabilities, but your particular focus will be on continuing the development of our hydropower capabilities and working with key staff in growing the business.

You’ll also be involved in supporting project management duties, coordinating with internal and external clients as well as assisting with guiding and mentoring other engineers within the team. In this role you will lead teams conducting technical work for feasibility studies, engineering designs, preparation of construction drawings and specifications, and carrying out inspections for rehabilitation projects for dams and hydroelectric facilities. Your particular focus will be design delivery and mentorship, but you will also be involved in the proposal process. You will be working in a collaborative environment with a great team of engineers, technicians, scientists, and other industry-leading peers.

Key Responsibilities

• Provide input to those managing and executing multiple projects (small to large) from the proposal stage through to completion
• Establish connections with other departments to support and enhance service delivery
• Work collaboratively with other disciplines and multidisciplinary project teams to execute project deliverables, as well as ensure that quality objectives, schedules, and budgets are met
• Mentor junior staff
• Design modifications to, or entirely new electrical, instrumentation, and controls systems related to dams, control structures, water retaining structures, switchyards and hydroelectric generating stations
• Conduct feasibility studies for proposed designs and assess costs and benefits for alternatives in a systematic and thorough manner.
• Manage and execute multiple projects from the proposal stage through to completion; Projects will include a variety of small to large projects involving water resources, flood control and hydroelectric sectors
• Prepare and review reports
• Perform calculations
• Conduct inspections and support project work on site as required
• Edit and prepare design specifications
• Conduct QA/QC reviews and facilitate the KGS’s QA/QC process.
• Contribute to the development of the electrical engineering practice at KGS by assisting the electrical design leadership by documenting technical knowledge, improving internal production processes, coordinating and developing internal training content, and other tasks.
• Perform other duties as assigned

About You

To fill the role, we’re looking for an applicant to bring forward a good mix of qualifications and previous experiences. Some highlights should include:

• Minimum of a Bachelor of Science (BS) degree in electrical engineering from a recognized university; A post-graduate degree is an asset
• Minimum of 7-15 years of experience in electrical engineering with demonstrated project management skills (tracking budgets and meeting schedules)
• Must be registered as a Professional Engineer (P.E.) in Washington, Oregon, or California, as well as eligible for registration as a professional engineer in other states via comity within three months of starting.
• Previous consulting experience is preferred but not required.
• Excellent verbal and written communication skills
• Candidate must be self-motivated, and able to work independently with minimal supervision
• Must be able to effectively assume a lead role as project engineer and communicate project and technical information with clients
• Demonstrated experience in site investigations, condition assessments, design and construction support are preferred
• Experience with station service distribution (all voltages), medium voltage equipment, fixed bus power distribution systems, Programmable Logic Controller (PLC) automation (for equipment control), generators and transformers including related monitoring systems, communication systems, system grounding, hoists and gate automation and balance of plant systems for hydroelectric stations preferred, but industrial experience will be considered
• Experience with the following would be considered an asset:
• Backup power systems (including Uninterruptible Power Supply (UPS), Direct Current systems and fuel fired backup)
• Lighting (including emergency and exit lighting systems)
• Fiber and copper structured cable systems, and associated networking equipment
• Distributed Control System (DCS) and PLC Automation, Human Machine Interface (HMI) and Remote Terminal Unit (RTU) integration (including any programming experience)
• Protection systems experience, including specifying, setting and verifying (include reference to voltages)
• Load flow analysis, system modelling, arc-flash, grounding, and other electrical studies (include reference to software used and any training)
• North American Electric Reliability Corporation (NERC)/Critical Infrastructure Protection (CIP) planning
• Physical or cyber security planning or design
• Unit outage planning
• Other renewable energy experience
• Travel to project sites is usually limited but is required depending on project/client requirements. The amount of travel time desired by our employees can usually be accommodated.
• Must possess a valid driver’s license and the ability/willingness to undergo security clearance checks
• Have the drive, attitude, and commitment to being an active participant in our employee-owned culture is a must

The salary range for this position is $120,000 to $155,000 annually.

Please note that the salary range mentioned in this job description should serve simply as a guide. The final compensation offered may vary based on a variety of factors, including candidate’s experience, skills, and location. KGS Group is committed to providing a fair, equitable, and competitive package that reflects the value an individual brings to the organization.

KGS Group is an employee-owned equal opportunity company offering an excellent compensation and benefits package.

KGS Group welcomes and encourages applications from people with disabilities. Upon request, KGS Group will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process.

Position Overview:

·        Job Title: Senior-Level Quality Manager

·        Job Type: Engineering/Construction/ Transit-Light Rail

·        Salary: $180,000-$200,000

·        Job Requirements: Quality Management Experience / Heavy-Civil Quality

·        Required experience: 15 - 20 yrs. in Heavy-Civil Quality, Light Rail Transit $1-5B Projects

·        Education level: Engineering or Construction Management Degree

Position Summary:

Quality Engineering, Inc. is seeking an experienced Senior Quality Manager who will be responsible for the implementation, improvement, and execution of the Quality Management System (QMS) Manual and project specific quality program requirements. This is a full-time position.

The Senior Quality Manager will ensure that the light rail project design and construction work activities are planned and executed in accordance with established transit agency  policies, procedures, systems and requirements of the quality plan and contract. This opportunity is located in Sacramento and will require the successful candidate to work onsite at the project under the supervision of the Project and Corporate Management. 

Position Description, Duties and Responsibilities:

·        Prepare, obtain approval, issue, and implement company project quality program manual (including quality assurance plan and procedures) in compliance with owner contract and company requirements

·        Manage the Quality Assurance and Control staff with oversite of Multiple contracts and projects

·        Review and accept quality program submittals for compliance, as required by contract documents and FTA Quality Management System (QMS) 2019 Guidelines

·        Ensure suppliers have appropriate Quality Control/Assurance measures in place

·        Coordinate testing and inspection of subcontractor’s scopes of work, including material testing facilities

·        Provide quality input to design and contractual documents

·        Develop an audit plan and audit schedule

·        Perform quality program, design, and construction audits for large infrastructure construction projects

·        Conduct audits of designers, manufacturers, suppliers, installation contractors

·        Perform quality engineering for test and equipment acceptance and systems integration and acceptance testing

·        Provide quality engineering support to construction managers, resident engineers, contractors, and equipment manufacturers as required

·        Analyze data for development of quality trend reports

·        Communicate directly with project & company management

·        Coordination of inspection of all materials upon delivery to site

·        Supervise and direct on-site personnel involved in quality control work

·        Supervise the inspection and review work in accordance with applicable codes and standards included in the project drawings and specifications.

·        Participate in review board meetings to resolve non-conformance areas; follow up to ensure corrections are implemented.

·        Leading the Quality team with review of field conditions for responses to RFIs.

·        Provide weekly, monthly, and quarterly quality reports to QC management

·        Leadership to ensure consistency of expectations, standards, and evaluations.

Experience and Education Requirements:

·        Engineering or Construction Management Degree and 15+ years of QA/QC experience in rail/bridge/public works industry or working for a contractor or public agency, and 10 years of Quality Management Experience.

·        P.E. preferred

·        ASQ Certifications preferred (CQA, CMQ/OE)

·        Knowledge of Transit Quality, Caltrans procedures is desirable

·        Ability to travel to construction sites (local) or office

·        USACE CQM-C is desirable

Minimum Skills, Knowledge, and Ability Requirements:

·        Computer skills including word processing, spreadsheets, and general data analysis

·        Organization, professionalism, accurate documentation skills and the ability to comply with transit quality regulatory requirements are essential.

·        Ability to interpret construction plans and specifications.

·        Experience developing quality monitoring formats and standards.

·        Experience evaluating document control plans.

·        Relevant quality assurance and/or quality control experience with transit agencies.

Company Information:

Founded in 1982, Quality Engineering, Inc. is a California-based engineering firm with extensive Quality Assurance and Quality Control Management experience in both design and construction of heavy capital projects. We are a certified SBE/DBE firm with project offices in Oakland, Sacramento, San Francisco, San Jose, Los Angeles, and Seattle.

QEI provides QA/QC services for design-bid-build and design-build projects meeting quality requirements of the FAA, FHWA, FTA. Past and current clients include BART, VTA, Sacramento Regional Transit, JPB, Seattle-Sound Transit, LA METRO, Caltrans, CAHSR, and Metrolink. We have experience working for both the owner agencies as well as large design and construction firms.

QEI offers attractive compensation and benefit packages as well as the opportunity to work on exciting high-profile projects while directly contributing to the success of a growing company.

Please visit our website at   to see what we are all about!

Description

Looking for an opportunity to make an impact?

At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainable. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.

If this sounds like the kind of environment where you can thrive, keep reading!

The Digital Modernization Sector brings together our digital transformation and IT programs, allowing us to better serve our customers through scale and repeatability.

(Group Profile/Link to Group page) - greatest work is ahead!

The NISC IV program at Leidos is looking for an Occupational Safety Health Analyst to work in Palmdale, CA OR Reno/Sparks, NV!

The selected candidate will:

• Take effective steps to ensure that workplace conditions comply with applicable federal and state Occupational Safety and Health standard provisions of any labor agreement, ensuring that all required records are prepared and maintained.

• Participates in Occupational Safety and Health Administration (OSHA) inspections and in any procedures that may follow a citation.

• Investigates, prepares, and forwards as required.

• Reports on injuries and fatalities.

• Conducts safe work procedures training courses.

Primary Responsibilities:

• This position will support the Federal Aviation Administration (FAA), Air Traffic Organization (ATO), Western Service Area (WSA) Environmental, Occupational Safety & Health (EOSH) Program and assist the District Safety and Environmental Compliance Managers (SECMs) for the Los Angeles (LAX) District.

• The candidate will support the customer’s Asbestos, Lead, Environmental Compliance, OSH Compliance, Confined Space, Fall Protection, Safety Training, Drinking Water, Indoor Air Quality (IAQ), and Pandemic programs.

• The candidate will participate in EOSH investigations related to potential accidental releases, mishaps, and employee complaints, as requested by the Safety & Environmental Compliance Manager (SECM).

Travel estimate up to 50%

Must be able to work onsite in Palmdale, CA OR Reno/Sparks, NV.

Required Qualifications:

• Working knowledge and proficiency utilizing Microsoft Office applications to include MS Word, MS Excel, MS Office and MS PowerPoint.

• The position requires the candidate to travel approximately 25% – 50% in support of Los Angeles (LAX) District.

• Ability to obtain and/or maintain Public Trust Security clearance.

• Bachelors degree with 4+ years of relevant work experience OR Masters with 2+ years of relevant work experience.  Additional years of relevant work experience may be accepted/considered in lieu of degree. 

Preferred Qualifications:

• Certified Industrial Hygienist (CIH), Certified Safety Professional (CSP), OR Associated Safety Professional is highly desired.

• Certified in any of the following areas is a plus:  Asbestos Hazard Emergency Response Act (AHERA) Asbestos Contractor/ Supervisor; AHERA Asbestos Building Inspector; Certified Lead Professional; Lead Inspector/ Risk Assessor; and Hazardous Waste Operations and Emergency Response (HAZWOPER).

• Able to be fit-tested and wear respirator, and be enrolled in Respiratory Protection Program (if hired).

• Able to meet all requirements necessary to climb structures and oversee Fall Protection Program.

• Confined Space assessment experience, program administration experience; Forklift Operator, Forklift Instructor; Aerial Lift Operator, and Aerial Lift Instructor Experience, are desired.

• Highly developed presentation skills, comfortable conducting training classes, self-motivated and proactive team player, and excellent written and oral communication skills.

Please Note:  The program budget salary for this role could fall anywhere between $85,000 to $95,000 with a slight wiggle room (no guarantees) based on relevant experience and assessment.  Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Leidos is growing!  Connect with us on LinkedIn and Facebook.

If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares.

For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.

The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

About Leidos

Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit and Benefits

Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at Your Data

Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at

If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the U.S. Federal Trade Commission.

Commitment to Non-Discrimination

All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Metrology Engineer

Summary:

 seeking a driven Process Control Engineer with expertise in a variety of Metrology tools. We are looking for someone who can support existing processes and develop new processes for new programs (30+ in flight) focusing on product quality and measurement repeatability. Collaboration is a must as you work closely with the Integration, Process Control, Facilities, Maintenance and Production teams on development of new processes, selection of new equipment/technology, standardization and problem resolution.

Objectives:

Total ownership of Atomica's metrology tools, including reflectometers, stylus profilers, optical CD, thin film stress, resistivity, etc.

Tool health, weekly SPC monitoring, and troubleshooting for process and tool issues

New equipment/technology selection, installation, and qualification

Drafting of Operating Instructions, Preventative Maintenance, and Equipment Control Plans for all metrology tools

Development of measurement techniques to characterize thin films, topography, optical critical dimensions, and other key features

Collaborate broadly to understand and anticipate the needs of Development and Production. Propose innovative solutions to current shortcomings and future problems.

Develop automated inspection routines

Integrate tool data streams into SPC system

Mentor and coach other Engineers and Technicians to teach best practices for quality control and measurement accuracy and repeatability

Perform GR&Rs

Perform materials analysis to assist in Failure Analysis and Root Cause Analysis investigations

Be an active member of the process control team to improve overall fab efficiency Capabilities:

BA/BS Degree in STEM with a minimum of 2 years relevant industry experience

Hands on experience troubleshooting equipment issues

Strong fundamentals in statistics, data analysis and demonstrated critical thinking skills

Ability to work in both a clean room environment and an office environment

Must be a US Persons under ITAR (citizen, green card holder, refugee, or asylum seeker). What Atomica Offers You:

Amazing growth and learning opportunities in MEMS

Competitive Health, Vision, Dental Insurance

401(k) and Roth 401(k) plan with company match

Continuing education opportunities

Paid Time Off

Flexible Spending Account

Catered in-office lunches