Engineering Jobs in Sunol, CA

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Job Overview

This position is responsible for the research, design, development and sustainability of electronic medical equipment. This individual serves as electrical engineer in a project team. As a key member of the project team, the engineer will collaborate closely with engineers and a cross-functional team to support the full product lifecycle.

Job Responsibilities and Essential Duties

• 
  
• Provide electrical technical in the research, design, development and sustainability of electronic circuits for medical devices. Ensure and maintain compliance to Corporate and Industry standards.
  
• Performs medical devices electrical system requirement study and functions research, participates in design & development activities, collaboration with contractors defining interface, power consumption and board dimensions.
  
• Programs bare metal coding for system control, performs design activities using EDA tools like OrCAD for schematics capture and PCB layout, generate circuit schematic diagrams, bills of materials and performance analyses, works with contractors for PCB fabrication and SMT, brings up PCB in the lab with tools like multimeter, oscilloscope.
  
• Perform system assembly, function testing, data analyzing, and test results documenting.
  
• Prepare documents including Design Specifications, Verification and Validation protocols/reports, relevant Risk Analysis.
  
• Support design reviews and contribute to risk assessments and design verification activities.
  
• Remote and Onsite electrical technical support as needed by the project.
  

Minimum Requirements

• 
  
• B.S. in Electrical Engineering, M.S. preferred.
  
• Minimum 0-2 years related experience
  

Required Knowledge, Skills, and Abilities

• 
  
• Deep understanding principles of DC regulators, such as LDO, Switching regulators.
  
• Knowledge of microcontroller hardware design and firmware coding, sensor interfaces such as SPI, I2C.
  
• Experience with EDA tools (OrCAD, Altium Designer, KiCAD etc.) design for schematic capture, PCB layout.
  
• Strong lab skills, including experience with oscilloscopes, multi-meter, and other diagnostic tools.
  
• Ability to work effectively in a cross-functional team environment and take direction from project leaders.
  
• Structured problem solving / root cause analysis.
  
• Ability to communicate within the discipline and with others who are not as technically trained.
  
• Strong oral and written communication skills
  
• Ability to prioritize tasks in a fast-paced environment.
  
• Knowledgeable using Adobe and Microsoft Office products such as Outlook, Word, Excel and PowerPoint.
  
• Annual Salary of 97K-107K depending on experience
  
  #LI-JF1 #LI
  

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  
• Parental and Caregiver Leave
  
• Tuition Reimbursement
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

QASource is a leading provider of software QA and testing services, supporting enterprise and high-growth technology companies. We integrate directly with engineering and product teams to deliver scalable, high-quality testing solutions across automation, manual testing, performance, security, and AI-driven QA.

Our clients expect senior-level partnership, technical fluency, and strategic account leadership.

The Senior Technical Account Manager (Sr. TAM) is responsible for managing and expanding a focused portfolio of strategic, enterprise-level accounts within a defined territory. This role requires ownership of multi-million-dollar revenue targets, executive-level relationship management, and the ability to drive account expansion through consultative, technically informed engagement.

This is not a support role. The Sr. TAM serves as a strategic advisor to Engineering Directors, VPs, CTOs, and QA leadership, ensuring delivery excellence while proactively identifying and executing growth opportunities within existing accounts.

The Sr. TAM will manage a high-touch portfolio of approximately 5–8 strategic enterprise accounts. Success in this role requires disciplined account planning, proactive client engagement, in-person relationship development, and the ability to creatively land and expand business across multiple stakeholders within complex organizations.

Responsibilities:

Account Ownership & Revenue Growth

• Own and manage a multi-million-dollar quota across a defined portfolio of 5–8 strategic enterprise accounts.
• Drive structured and strategic upsell and cross-sell initiatives within existing customers.
• Identify whitespace opportunities across QA, automation, performance, security, and AI-enabled services.
• Close meaningful expansion deals, including engagements of $150K+.
• Develop creative, value-driven approaches to land-and-expand initiatives across Engineering Directors, VPs, and CTO-level stakeholders.
• Partner with delivery leadership to align technical execution with commercial growth objectives.

Executive Relationship Management

• Build and maintain trusted relationships with Engineering Directors, VPs, CTOs, and C-suite stakeholders.
• Conduct regular in-person customer visits within assigned territory.
• Lead in-person Quarterly Business Reviews (QBRs) focused on measurable outcomes, roadmap alignment, and strategic growth opportunities.
• Serve as the executive escalation point for complex delivery or client challenges.

Strategic Account Planning & Execution

• Develop and maintain comprehensive strategic account plans for each assigned customer.
• Maintain clear documentation of stakeholder mapping, growth objectives, expansion pathways, and execution milestones.
• Track progress against defined revenue and relationship goals.
• Execute consistently against a structured path toward growth.
• Demonstrate strong organizational discipline in account tracking, forecasting, and internal coordination.
• Organization, planning rigor, and follow-through are critical success factors in this role.

Technical & AI Fluency

• Maintain broad knowledge of emerging AI technologies and their impact on software quality and engineering workflows.
• Proactively stay current on AI tools, automation advancements, and testing innovations.
• Translate AI-driven opportunities into relevant, business-aligned discussions with engineering stakeholders.
• Position QASource’s AI-augmented testing capabilities in alignment with customer technology strategies.

Technical & Delivery Alignment

• Collaborate closely with QA Managers, Engineering teams, and project leaders.
• Translate technical delivery insights into executive-level business value discussions.
• Proactively identify risks and implement mitigation strategies.
• Ensure seamless integration of QASource services into client engineering environments.
• Demonstrate a practical understanding of how software is built, tested, and released within modern SDLC frameworks.

Required Qualifications:

• 8–10+ years of experience in Technical Account Management, Enterprise Sales, Customer Success, or a related client-facing technical role.
• Proven ownership of multi-million-dollar revenue targets.
• Demonstrated success closing $150K+ expansion or new deals.
• Documented track record of expansion within a focused portfolio of strategic accounts.
• Experience managing a limited book of business (ideally 5–20 accounts; this role will manage 5–8).
• Direct experience working with Engineering Directors, VPs, CTOs, or C-suite stakeholders.
• Technology industry background specifically within software, SaaS, cloud platforms, DevOps, QA, or technical services environments.
• Demonstrated general understanding of the Software Development Lifecycle (SDLC) and how Quality Assurance integrates into development processes.
• Prior experience engaging with engineering, QA, or product teams in a software delivery context.
• Strong executive presentation skills and ability to conduct in-person QBRs.
• Demonstrated ability to creatively mine and expand accounts.
• High level of organization and structured account planning discipline.
• Stable career progression.

Preferred Qualifications:

• Background in QA, software development, DevOps, or technical services environments.
• Familiarity with CI/CD pipelines, automation frameworks, API integrations, performance testing, or AI-enabled testing tools.
• Experience operating within a territory-defined account ownership model.
• Experience in professional services or distributed delivery environments.
• MBA or advanced technical degree (preferred but not required).

Core Competencies:

• Executive presence and professionalism.
• Revenue accountability.
• Strategic account planning and disciplined execution.
• Technical credibility within software engineering environments.
• AI awareness and forward-thinking mindset.
• Consultative, value-based communication.
• Risk identification and mitigation.
• Proactive, structured account leadership.

Why Join QASource:

• Manage a focused portfolio of high-value enterprise technology clients.
• Drive measurable revenue expansion through strategic value creation.
• Partner directly with engineering and executive leadership teams.
• Operate in a technically rigorous, innovation-driven organization focused on quality and long-term partnerships.

Salary Range:

• $110,000 - $120,000 per annum (30% Variable).

Perks:

• Health, vision, and dental benefits.
• 401(k) with company match.
• Paid time off and holidays.
• Wellness programs and professional development opportunities.

QASource is a leading provider of outsourced software quality engineering services, specializing in scalable and customizable QA solutions for clients worldwide. With over 24 years of experience across diverse industries, we combine advanced AI technologies with traditional testing methodologies to enhance software quality, efficiency, and innovation. Our dedicated engineers integrate seamlessly into client workflows, providing tailored solutions that align with specific project needs. We prioritize continuous improvement, effective communication, and a culture of respect and inclusion, ensuring top-notch service to our valued clients.

We are seeking a high-performing Sales Executive to lead new client acquisition across mid-

market and enterprise software companies. This is a quota-carrying role focused on

identifying and closing new logo opportunities within engineering organizations that build

and maintain complex software applications.

This role benefits from QASource’s strong marketing engine that consistently delivers

inbound and nurtured leads. You’ll be responsible for engaging and progressing these

opportunities as well as generating your own pipeline through outbound efforts.

Responsibilities:

• Identify, qualify, and close new logo opportunities within software product companies, with a focus on engineering and QA leadership.
• Engage both inbound leads generated by marketing and self-sourced opportunities through targeted outreach.
• Understand common QA challenges (e.g., test coverage, scalability, automation limits, technical debt) and map them to QASource’s service offerings.
• Conduct discovery, coordinate with technical pre-sales for solution design, and drive deals through the full sales cycle.

Required Qualifications:

• 3–7 years of quota-carrying experience in B2B sales, preferably in IT services or consulting.
• Track record of closing new logo deals in a multi-stakeholder sales cycle.
• Strong understanding of the software development lifecycle and QA processes (Agile, DevOps, CI/CD).
• Understanding of AI/LLM use cases in software lifecycle.
• Proven ability to align technical services with business outcomes.
• Comfortable engaging with technical and executive decision-makers.
• Familiarity with sales tools (HubSpot, LinkedIn Sales Navigator, etc.).

Preferred Qualifications:

• Specific knowledge of software QA services—including manual testing, test automation, API testing, and performance/security testing—is a strong plus.
• Prior experience working with or selling to software engineering or product teams.
• Industry familiarity in SaaS, health tech, fintech, or eCommerce.

Salary Range:

• $95,000 - $120,000 per annum (+Variable).

Perks:

• Health, vision, and dental benefits.
• 401(k) with company match.
• Paid time off and holidays.
• Wellness programs and professional development opportunities.

● You will develop and maintain vehicle test plans, supporting on and off site ensuring comprehensive coverage of new site enablement features.

● You will manage test scheduling and coordination, working with vehicle operations to maximise testing efficiency.

● You will perform first-pass triage of simulation and vehicle test results, identifying issues and categorising them for engineering review and solution development.

● You will document test findings and identify opportunities to streamline processes and create reports that help autonomy engineers quickly understand test outcomes.

Qualifications

● Ability and willingness to travel for test support

● Familiarity with scripting languages (Python preferred) for automation and data analysis

● Strong organisational skills with experience managing schedules or coordinating technical workflows

● Experience with simulation environments or game engines

● Exposure to robotics, automotive, or autonomous systems

● Familiarity with version control (Git) and issue tracking systems (JIRA or similar)

● Experience with test engineering, QA, or validation processes

● Understanding of basic vehicle dynamics or motion planning concepts

ProcureAbility, a Jabil company, is the leading procurement services company, offering advisory, managed services, digital, staffing, and recruiting solutions. For 30 years, we have focused exclusively on helping clients elevate their procurement function. We combine leading methodologies, analytics, market intelligence, and industry benchmarks with our uniquely flexible and customizable service delivery model. Global organizations of all sizes trust ProcureAbility to transform their procurement operations, drive growth, and reimagine what’s possible.

Job Title: Sourcing and Contract Specialist

Our client, a leader in their industry, is hiring Sourcing and Contract Specialists. These are contract roles, currently scheduled through 12/31/26 with potential to convert to direct hire.

Hybrid Role: Training will be on-site for 2 weeks, and then the role will be hybrid. After the training period, the work is expected to be mainly remote with occasional on-site meetings.

Location: East San Francisco Bay area

Job Category: Procurement / Supply Chain

Job Level: Individual Contributor

Applicants must be authorized to work for ANY employer in the U.S. ProcureAbility is unable to sponsor or take over sponsorship of an employment Visa at this time.

What can you expect to do?

Responsibilities:

• Conducts negotiations with bidders, for non-routine, may support or work with Sourcing.

• Coordinates and assembles supporting documentation to support audits.

• Works with vendors and internal stakeholders to assemble, review, prepare, and route for vendor and management approval (using ARIBA and EDRS), necessary documents for these tasks.

• Works with vendors, Project Team to improve quality of supporting contract documents to reduce rework required by others.

• May assist in the creation and development of purchase requisitions.

• For Routine Contracts, reviews vendor proposals to ensure that rates and terms are consistent with outline agreements.

• May support / review vendor proposals to ensure that rates and terms are consistent with outline agreements.

• Ensures that Company standards are followed when executing contract documents.

• Tracks approval status of contracting documents from inception through approval and ensures that documents are routed expeditiously.

• For Routine Contracts, conducts negotiations with bidders, for non-routine, may support or work with Sourcing department.

• Reviews purchase orders and contracts as part of procurement approval process.

• Provides technical support and analysis in preparation of scope, cost, schedule, safety and environmental concerns pertinent to the contract specifications; and verify and process contract invoices.

What is needed to be successful in this role?

• Bachelor’s Degree in Construction Management, Engineering, Business Administration or related field

• Ability to work in cross-functional teams

• Ability to work in a team environment

• Ability to work on multiple issues and tasks

• Advanced in MS Excel, PowerPoint

• Demonstrated competencies on use of supply chain management tool (e.g. ARIBA) and other business systems tools (SAP, SharePoint, EDRS)

• Demonstrated knowledge of Company standards regarding contracting processes.

• Conflict resolution/negotiation skills

• Demonstrated ability to track contract costs, purchase order status, and other required information in SAP

• Demonstrated competencies on use of ARIBA and EDRS is a plus

• Process improvement experience

• Presentation Skills

• Verbal and Written Communication Skills

• Knowledge of Contractual Terms and Conditions

ProcureAbility, A Jabil Company, is proud to be an Equal Employment Opportunity and Affirmative Action Employer. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as a person with a disability, or other legally protected characteristics.

If you are a Qualified Person with a Disability or a Disabled Veteran and require assistance making your application, please get in touch with HR at

Don’t meet every single requirement? Studies have shown that women and people of color are less likely to apply for jobs unless they meet every qualification. At ProcureAbility, we are dedicated to building a diverse, inclusive, and authentic workplace, so if you’re excited about this role but your experience doesn’t align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles.

Qualifications:

• B.S. in Mechatronics, Mechanical Engineering, Electrical Engineering, or Robotics
• 2–5 years of professional experience in product design, robotics, or industrial automation
• Strong proficiency in parametric 3D modeling
• Experience carrying a PCB design from schematic to manufacturing
• PLC programming and industrial communication protocols (Modbus, EtherCAT, or CAN)
• Proficiency with lab equipment (oscilloscopes, multimeters) and shop tools (soldering, basic machining)
• Experience with 480 3ph and large battery systems
• Experience programming microcontrollers (C/C++) or Python scripting desired
• Familiarity with ROS is helpful
• Experience with regulatory certification (UL, CE, FCC) is a plus

Responsibilities:

• Design mechanical mechanisms, enclosures, and robotic end-effectors
• Create detailed manufacturing drawings (GD&T), bills of materials (BOMs), and assembly instructions
• Size and select electro-mechanical components such as motors
• Design and build test fixtures to validate mechanical life and reliability
• Design and layout mixed-signal PCBs for sensor interfacing, power management, and motor control
• Manage the PCBA fabrication process
• Design industrial cable harnesses and manage interconnects

Tool Room Manager – Medical Device Manufacturing (Bay Area, CA)

I’m supporting a leading medical device organization that is looking for a hands-on Tool Room Supervisor to lead the maintenance, repair, and optimization of 300+ complex injection molds — including hot runners, PEEK, and glass-filled materials.

This is a high-impact role overseeing a tool room team while driving mold performance, uptime, and continuous improvement across a fast-paced manufacturing environment.

What’s Offered:

• Competitive salary: $130K

• Relocation sign-on bonus for non–Bay Area candidates

• Medical, dental & vision (effective day 1)

• Company-paid life insurance & disability

• 401k with company match

• Generous PTO + 10 paid holidays

• Tuition reimbursement

• Additional perks: legal plan, pet insurance & home ownership program

If you have strong experience in injection mold repair, tooling, EDM, TIG welding, hot runners, or tool room leadership, I’d love to connect.

Interested? Send me your resume or best contact information or resume.

#injectionmolding #tooling #manufacturing #medicaldevices #hiring #toolroom #moldmaking #engineering #bayareajobs

Job Description

Sanmina Corporation (Nasdaq: SANM) is a leading integrated manufacturing solutions provider serving the fastest-growing segments of the global Electronics Manufacturing Services (EMS) market. Recognized as a technology leader, Sanmina Corporation provides end-to-end manufacturing solutions, delivering superior quality and support to Original Equipment Manufacturers (OEMs) primarily in the communications networks, defense and aerospace, industrial and semiconductor systems, medical, multimedia, computing and storage, automotive and clean technology sectors. Sanmina Corporation has facilities strategically located in key regions throughout the world.

The Sanmina Fremont facility is a full-service enclosure systems solution manufacturing plant. Located in California’s Silicon Valley, this facility produces low-to-mid volume New Product Introduction (NPI) runs to full-scale volume. The Fremont facility offers everything from small piece parts to fully integrated and tested systems. In addition, this location offers in-house painting capabilities and flexible logistics solutions in distribution, inventory management and hubbing, as well as repair services.

Job Purpose- The Production Manager is responsible for the direct management of all manufacturing and production activities for complex fabricated sheet metal, tubular frames, final assembly & test of a variety technical components & products. This role focuses on optimizing shop floor processes, ensuring product quality, meeting production schedules, and maintaining a safe working environment, directly supporting the strategic goals set by the Plant Manager.

Key Responsibilities

Production & Efficiency Management

• Oversee the daily execution of production schedules across multiple departments (e.g., sheet metal fabrication, welding, powder coat painting, final assembly, testing) to ensure on-time delivery (OTD) targets are met.
• Drive the implementation and application of Lean Manufacturing principles and Continuous Improvement initiatives (e.g., 5S, Standard Work, Waste Reduction) to enhance operational efficiency and reduce manufacturing cycle time.
• Monitor key operational metrics, including Overall Equipment Effectiveness (OEE), scrap rate, and labor utilization, taking corrective action as necessary.
• Coordinate with the Engineering department to manage the introduction of new products (NPI) smoothly into production and resolve complex manufacturing issues.

Quality and Safety

• Champion a rigorous Safety (HSE) program on the shop floor, ensuring all employees adhere to strict safety protocols and environmental compliance standards.
• Work closely with the Quality team to maintain high product quality, ensure compliance with the ISO 9001 standard, and manage in-process quality control gates.
• Lead and support teams in performing Root Cause Analysis (RCA) for production defects and implementing sustainable corrective and preventive actions (CAPA).

Team and Resource Management

• Directly supervise Production Supervisors, leading, mentoring, and developing the manufacturing workforce.
• Manage labor planning, scheduling, and capacity requirements to match demand fluctuations.
• Collaborate with Materials Planning, Purchasing and Logistics teams to optimize inventory levels and ensure the timely flow of components to the production line.

Qualifications

Education: Bachelor's degree in Industrial Engineering, Manufacturing Engineering, Operations Management, or a related technical field.

Experience: Minimum of 7+ years of experience in a manufacturing environment, with at least 3 years in a management or senior supervisory role overseeing production operations.

Industry Knowledge: Hands-on experience in the heavy electrical equipment or similar industrial manufacturing sector is highly preferred as is familiarity with processes for MV products (e.g. electrical assembly, insulation processes).

Technical Skills:

• Proven expertise in Lean Manufacturing and Continuous Improvement methodologies.
• Strong working knowledge of manufacturing ERP/MRP systems and production scheduling tools.

Leadership: Exceptional problem-solving skills, decisiveness, and proven ability to manage and motivate a large, diverse manufacturing workforce in a fast-paced environment.

This is an ITAR facility and applicant must be a US Citizen or a lawful permanent resident.

Sanmina is an Equal Opportunity Employer – M/F/Veteran/Disability/Sexual Orientation/Gender Identity

Job Summary

An experienced Quality Assurance Manager who will play a pivotal role in ensuring the consistent delivery of high-quality products that exceed customer expectations. This person will be responsible for developing, establishing, and maintaining robust quality assurance programs, policies, processes, procedures, and controls. This person will direct continuous improvement and effectiveness of all aspects of the Quality System. They will interface with manufacturing, engineering, customer, and vendors to determine responsibilities and solutions. The Quality Assurance Manager oversees and supports supplier and internal audit functions, validation and calibration activities, environmental and analytical quality testing, product stability program, incoming quality assurance, documentation system, and all compliance/regulatory responsibilities.

Duties/Responsibilities

• Responsible for implementing and maintaining the effectiveness of the quality system.
• Determines appropriate staff levels, schedules, and resources.
• Coordinates sessions with the project managers/core team leaders to look for opportunities for staff to learn about new initiatives or volunteer on new projects.
• Drives the development of department tools and methodologies.
• Determines staff assignments and schedules work to meet completion dates and deliverables.
• Establishes cross-functional team relationships.
• Provides an overview of the function and role of his/her group, technical skill sets, to other groups and/or divisions.
• Works cross-functionally in identifying and resolving quality issues.
• Drives and evaluates department progress and results.

Required Skills/Abilities

• 5 years of supervisory and/or management experience.
• Ability to understand and evaluate technical data/issues.
• Ability to manage and negotiate with external vendors.
• Good written and oral communication skills.
• Strong interpersonal and leadership skill.
• A goal-oriented self-starter with an acute attention to detail and the proven ability to develop and motivate staff.
• Show longevity and stability in previous experience.

Education and Experience

• Bachelor’s degree in Engineering, Science or technical area or equivalent experience
• 5 - 7 years’ work experience in computer/electronic environment, with an emphasis on current good manufacturing practices and quality system management.

Heavy Civil Estimator

When joining GSW Construction, Inc., you will be a part of a fast-paced construction team that strives for excellence. We are actively seeking an experienced Heavy Civil Estimator. The purpose of this role is to contribute to the success and profitability of projects by providing accurate, timely, and complete estimates. The Estimator will be responsible for calculating the cost of a broad range of projects. The goal is to provide accurate information to help in operations and strategic planning, perform quantity takeoff s, produce proposals, and prepare cost estimates.

Job Details: Full-time position

● Benefits: o Salary Employee (Schedule: Full-time with some required travel and weekend availability.) o 401(k) o OE3 Health & Dental Insurance o Paid Vacation o Salary DOE Essential Duties & Responsibilities

● Perform quantity take off s/reach out to potential subcontractors

● Analyze and compile estimate data that impact the cost of labor, materials, equipment requirements, location, and other factors to ensure a high-quality and timely estimate.

● Accurately prepares estimates. Review proposal specifications and drawings to determine scope. Determines the required contents of estimates and evaluates historical data to project man-hour data.

• Produce budgets from conceptual and schematic design phases that align with the organization's goals and strategy • Review drawings, specifications, and proposed project site conditions; record findings and solicit input from field operations to include in the final project estimate.

● Analyze alternative solutions and construction methods to increase the competitiveness of the bid.

● Apply mathematical calculations requiring advanced analytical processes to ensure logically estimated costs are accurate.

● Present estimate content in bid reviews with senior management to ensure accuracy and completeness. ● Communicate with owners, subcontractors, and public and private entities to ensure competitiveness.

● Develop and maintain business relationships to increase bid opportunities in the regional market.

● Participate in and lead discussions, catalyzing creative thinking and innovative ideas, and distinguishing a successful estimate.

Qualifications & Requirements

● Bachelor’s degree in civil engineering, Construction Management, or equivalent experience.

● 5+ years’ experience in heavy civil construction, emphasizing underground utilities, sewer/stormwater pump stations, WWTP/WTP work, heavy highway, bridges/concrete structures, and commercial/residential site work arena.

● Proficient in HCSS Heavy Bid

● Negotiated project experience preferred, including technical writing skills.

● Proficiency with all MS Office products (Word, Excel, PowerPoint, etc.)

● Advanced knowledge of civil engineering principles ● Advanced knowledge of construction principles and equipment capabilities

● Excellent interpersonal and communication skills. Specific Job Requirements:

● Knowledge of project management software and estimating software.

● Working knowledge of construction equipment, materials, techniques, and required standards applicable to the discipline.

● Successful completion of a pre-employment drug, alcohol, and background investigation.

● Valid Driver’s License.

● Current on all company-required safety training.

● Competence to maintain confidential information and avoid conflicts of interest.

● Adherence to the GSW Employee Handbook.

Notice to All Potential Job Candidates GSW Construction, Inc. is proud to be an equal-opportunity workplace. Individuals seeking employment at our company are considered without regard to age, ancestry, color, race, gender (including pregnancy, childbirth, or related medical conditions), gender identity or expression, sexual orientation, genetic information, marital status, medical condition, mental or physical disability, national origin, protected family care or medical leave status, religion, military or veteran status, or any other characteristic protected by federal, state, or local laws. Applicants must be authorized to work in the United States.

Job Description

Develop fully integrated Engineering, Procurement, Construction, Commissioning logically tied, and resource loaded schedules • Monitor, analyze and report the critical path and overall project performance • Analyze and report on scheduling and project data with an innovative approach leading to actionable outcomes • Create potential “what-if” scenario schedules showing viable alternative paths to achieve project objectives, accelerate or reduce schedule and cost risks • Ensure scheduling tools are progressed and updated weekly with all stakeholders across multiple programs, while providing accurate and meaningful outputs

Required Skills & Experience

3-10 years of scheduling/planning experience on large commercial, industrial, mining, government, or oil & gas construction projects • Project size $100M + • Direct scheduling experience with proficiency in Primavera P6 are required for this role • Proficient Microsoft Excel skills • Power BI experience preferred but not required • Experience in Critical Path Methodology, Earned Value Management with a demonstrated history of successful schedule reporting, compression, and mitigation efforts

Job Title: Electro-Mechanical Assembler

Duration: 12 Months

Location: Milpitas, CA

Pay Rate: $27- $30/hr.

Intelliswift Software Inc. conceptualizes, builds, and supports the world's most amazing technology products and solutions. Our team of rich experts from diverse backgrounds contributes to making Intelliswift one of the most reliable partners in IT and Talent solutions. We specialize in delivering world-class Digital Product Engineering, Data Management and Analytics, and Staffing Solutions services to Fortune companies, SMBs, ISVs, and fast-growing startups.

Job Description:

We are looking for Associate Test Engineers for various positions in manufacturing who will be involved with the testing of new technologies such as optics/opto-mechanical, assembly, electrical/PCB, alignment, and system integration. In these positions you will work on assignments that are moderately complex in nature where judgment is required to resolve problems and make routine recommendations.

• Perform set-up, calibration, testing and troubleshooting of mechanical assemblies at system level.
• Determine and may develop methods and procedures from blueprints, drawings and diagrams.
• Test and troubleshoot assemblies and/or final systems, and complete rework on assemblies and/or systems as a result of testing.
• Prepare technical reports summarizing findings and recommending solutions to technical problems. May assist in the selection and set-up of specialized test equipment.
• Work on assignments that are moderately difficult, requiring judgment in resolving issues or in making recommendations.
• Perform ongoing daily work with minimal instruction, and with general instructions on newly introduced assignments.
• May provide work assignment direction and technical training to peers.

Qualifications (What we need to see):

• You have hands-on experience in electro-mechanical assembly, testing, troubleshooting and repair.
• Ability to work in a clean room environment is required.
• You have experience with systems development and testing, including formulating system level requirements, test specifications and test results.
• Hands on experience using Oscilloscopes and DVM analysis tools and equipment is preferred.
• You are able to use and manipulate a variety of fine adjustment hand tools, torque wrenches and calipers.
• You work effectively across different functional teams in different locations.
• You demonstrate excellent written and oral interpersonal skills in English.
• You demonstrate excellent organization skills, with a logical approach to problem solving, good time management and task prioritization.
• You are dedicated and able to work with a minimum of supervision.
• You hold a Technical Certificate, or AS degree, or military technical training experience, or equivalent vocational training in a technical discipline and a minimum of 5 years of related experience. A BSEE, BSEET or similar degree in an engineering discipline is strongly preferred.

Equal Employment Opportunity Statement

Intelliswift celebrates a diverse and inclusive workforce. We offer equal employment opportunities to all applicants and employees. All qualified applicants will be considered regardless of race, color, sex, gender identity, gender expressions, religion, age, national origin or ancestry, citizenship, physical or mental disability, medical condition, family care status, marital status, domestic partner status, sexual orientation, genetic information, military or veteran status, or any other protected basis under the law.

Americans with Disabilities Act (ADA)

If you require a reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please contact Intelliswift Human Resources Department

Other Employment Statements

Intelliswift participates in the E-Verify program.

Learn More

For information on Intelliswift Software, Inc., visit our website at

Job Responsibilities:

• Take full ownership of project delivery from concept through construction, ensuring alignment with Flint’s constructability and BIM standards, client expectations, and financial goals.
• Lead multidisciplinary teams in the coordination of architectural, engineering, and construction processes; provide strategic guidance across all phases of design-build execution.
• Oversee and manage detailed project schedules, deliverables, and budgets; ensure key milestones are met and proactively identify and resolve risks or roadblocks.
• Facilitate and lead high-level project meetings, including design charrettes, owner presentations, technical coordination sessions, and internal strategy meetings; set clear agendas, drive outcomes, and ensure accountability.
• Oversee engagement with school districts, local jurisdictions, city planning departments, and permitting agencies to streamline submittals, revisions, and approvals.
• Provide executive-level oversight of design documentation including contracts, narratives, scopes of work, and change documentation to ensure clarity, alignment, and quality.
• Drive proposal development, fee structuring, and project scoping in close coordination with other architects, estimating, preconstruction, and executive teams.
• Direct and manage BIM execution strategies in collaboration with VDC staff; ensure accurate modeling, clash detection, and seamless transition to construction documentation.
• Ensure all project documentation meets both regulatory and constructability standards; provide quality control oversight and technical reviews as needed.
• Resolve design and construction coordination challenges swiftly and decisively; escalate issues only when necessary and act as the primary point of accountability.
• Provide high-level mentorship and leadership to project architects, designers, and support staff; foster a proactive, solutions-driven culture focused on excellence, growth, and results.

Job Requirements, Qualifications, Characteristics:

• Bachelor’s degree in Architecture.
• Licensed Architect
• 10+ years of architectural project management experience with a strong understanding of design development, construction documentation, drawings and specifications, and coordination in a fast-paced, collaborative environment.
• High proficiency in Revit is required; experience with Bluebeam, Microsoft Excel, and other design and construction-related platforms is strongly preferred.
• Familiar with Adobe Creative suite, Lumion, Enscape, Autodesk construction cloud. Modeling/drafting software such as Sketchup and AutoCAD.
• Proficient is 3D modeling & coordination tools such as ACC and Revizto.
• Having education/ DSA and public project coordination is a must.
• Strong project coordination and communication skills, with proven success managing interdisciplinary teams and fostering collaboration between design, preconstruction, and field teams.
• Commitment to high standards of professionalism, equity, and teamwork; experience engaging with diverse communities is valued. Demonstrated ability to produce accurate and detailed technical drawings and construction documents.
• Must be proactive, self-motivated, and comfortable stepping into hands-on design tasks when needed to support team success.

The Senior Estimator responsible for preparing budgets, estimates and pre- bid packages for construction projects to be built for clients under the CM at Risk guaranteed maximum pricing structure.

Responsibilities also include working with the project management team in establishing a bidders list, soliciting and evaluating subcontractor proposals and scopes of work, preparing quantity surveys and reviewing project plans and specifications for constructability and value engineering in all CSI (Construction Specification Institute) categories of work.

The Senior Estimator will supervise a team of estimators and cost engineers who support departmental and organizational goals through their efforts.

Responsibilities includes (but may not be limited to):

• Performs accurate, thorough and timely quantity takeoffs using company format, detail and coding for all MasterFormat (CSI), Uniformat and bid packages for all levels of project documents (schematic, design development and construction documents) that can be clearly understood by internal and external team members.
• Assist in developing estimates by evaluating drawings, building plans, specifications, & related documents.
• Assists in providing quantity comparison between estimate revisions.
• Prepares detailed estimate.
• Actively participates in the internal estimate review process.
• Develops accurate and concise clarifications and assumptions with the project management team’s assistance.
• Assists with final assembly of estimate for presentation to owner.
• Summarize estimate data into reports for review by executive team, clients, and design teams.
• Prepares and presents budget presentations to owners and architects.
• Leads the buyout process.
• Prepare detailed instructions to bidders, trade specific scope of work and comprehensive bid packages.
• Directs, coordinates and provides information and documents to subcontractors.
• Assist with pre-bid site walks and document existing conditions.
• Assist with subcontractor bid review and ensure scope of work is comprehensive.
• Prepare bid tallies for project team and owner review.
• Leads in the technical review of plans and specifications during the schematic design, design development and construction document phases of pre-construction.
• Assist with reviews of milestone documents to identify and communicate the development of changes to the team.
• Obtains clarification on plans and specifications from architects and engineers when necessary.
• Conducts reviews of milestone documents to identify and communicate the development of changes to the team.
• Communicates with architects and consultants to clarify scope of work, materials, and schedule requirements, and documents these clarifications.
• Demonstrate strong communication skills internally with project management team, and externally with owner, architect, engineer, and subcontractors.
• Manage individual workload to accomplish tasks within given timeframes.
• Manage other team members’ workloads to accomplish tasks within given timeframes.
• Ability to perform duties across multiple projects concurrently.
• Considers and understands problems and identifies appropriate solutions.
• Builds and maintains effective relationships with customers, design team, subcontractors, suppliers and user groups that reflect and support company core values and meets customer’s expectations.
• Attends project site pre-bid meetings, site tours and post-bid interviews as required.
• Assist and participate with pursuit interview prep and presentations.
• Develops unit costs accurately and analyzes value management analysis options.
• Develops Cost Management / Value Engineering log process and manages during the preconstruction process.
• Develops Variance Reports at milestone issuances that clearly define deltas between estimates for internal and external use.
• Develop Cost Studies in clear and concise platform for project team review and decision making.
• Develop Benchmark studies for project estimate comparison for internal review and analysis.
• Self-reliant in researching, understanding, and developing knowledge of building designs, systems, construction materials, and methods through available resources.
• Ability to teach, educate, and guide both internal and external team members.
• Provides internal database input based on current market feedback for incorporation into database.
• Leads in the training and development of cost engineers.
• Leads in the training and development of estimators.
• Provide feedback to estimate team members on work process / work product on a regular basis.
• Works closely with new hires and/or new project teams to educate them on the way of doing business based on standard forms, programs and operational standards.
• Oversees the preconstruction process with the owner’s team.
• Provides support as needed to the project management teams as needed.
• Creates projected budgets early in the design phase of a project.
• Coordinates preconstruction planning with design team, contractors and clients.
• As necessary, works with Executive Group on special initiatives, company goals and associate related training and/or programs.
• Provides input on future projects via lessons learned and continuous improvement.
• Attends project meetings with clients, the city and design team.
• Works with development or owner to coordinate the design and specifications on issues.
• Leads the pre-construction team to ensure initial budgeting represents current market pricing and quality reporting.
• Communicates with project management team, ownership, clients, subcontractors, vendors, etc. to provide quality results while mitigating project risks.
• Collaborates with VP’s towards a common goal; streamline the project delivery process, review progress of buy- out, submittals, construction schedule and performance on all projects.
• Keeps current with latest estimating technology and techniques.
• Manages project budgets for preconstruction services.
• Manage time and utilize electronic timecard software in a timely manner.
• Other duties upon request.

Qualifications:

• 10+ years of experience as Estimator / Sr. Estimator in commercial construction industry
• Bachelor’s degree in Construction Management, Construction Science, or Civil Engineering preferred but not required
• General Construction Knowledge
• Knowledgeable in civil/site construction, foundation and structural systems, interior finishes, exterior wall systems, mechanical and electrical systems and the costs of these systems
• Ability to read and interpret drawings and specifications
• General knowledge of negotiated bids, hard bids, and GMP processes
• Proficient in all estimating software programs used in preconstruction: On-Screen Takeoff (OST), Destini, Timberline, Building Connected, Assemble, Bluebeam, Power BI, BIM360, Excel, Word, MS Project
• Must possess strong verbal and written communication skills
• Strong math and analytical skills
• Attention to detail
• Organized, efficient, able to multi-task effectively, hardworking, and dedicated
• Able to thrive in a deadline-oriented, fast-paced environment
• Excellent communication skills and interpersonal skills
• Demonstrated analytical, problem solving, and both oral and written communication skills
• Enjoys being part of a collaborative team and a fun work environment
• Possess the ability to estimate all aspects of a commercial construction project, assemble into one budget and present to owners
• Must be able to operate as a “stand alone” estimator able to handle complete projects if required
• Ability to manage personnel, subcontractors, preconstruction schedules and preconstruction budgets
• Ability to mentor and coach personnel

Working Conditions:

• Duties required physical abilities such as repetitive hand and finger motion, sitting, standing, walking, as well as extending hands and arms in work areas.
• The individual is required to occasionally move around the office and constantly operate a computer and other office machinery, etc.
• Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.

PilotCBP Air Interdiction Agent

NEW RECRUITMENT AND RETENTION INCENTIVES!

Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.

If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demandAPPLY TODAY!

DONT FORGET TO CHECK OUT THE INCENTIVES SEE SALARY SECTION BELOW!

Duty Locations

Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:

Southeast Region:Homestead, FL and CAMB:Aguadilla, PR

Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX

NASOC UAS locations:Sierra Vista, AZ; San Angelo, TX

Duties and Responsibilities

As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:

• Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
• Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
• Collecting, refining, and analyzing strategic and tactical intelligence.
• Supporting search and rescue and humanitarian efforts.

Salary and Benefits

Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).

Recruitment Incentive:New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)

Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.

This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).

• GS-11, 1st year annual pay - $106,588
• GS-12, 2nd year annual pay - $127,754
• GS-13, 3rd year annual pay - $151,918

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).

• GS-11, 1st year annual pay - $115,115
• GS-12, 2nd year annual pay - $137,974
• GS-13, 3rd year annual pay - $164,071

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).

• GS-11, 1st year annual pay - $127,906
• GS-12, 2nd year annual pay - $153,305
• GS-13, 3rd year annual pay - $182,302

Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.

• RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)

• RI: Retention Incentive (25% for Key West, FL)

RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)

Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications

Experience:You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:

• Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
• Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
• Developing strategies and coordinating aircraft and ground assets.
• Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
• Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.

Hiring Minimums:

Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:

• Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
• Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
• Helicopter Rated: Rotorcraft Helicopter with instrument rating.
• Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).

Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.

250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.

FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.

Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)

UAS Flight Hours:Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the ""Total flight time"" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the ""day before an individual's 37th birthday"" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.

NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.

Age Waiver: Creditable law enforcement officer service -Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decisionIsabellav.Dept of State,the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training:This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply

There Are Three Ways to Apply to Become an Air Interdiction Agent:

• Fill out theAir Interdiction Agent applicant checklistand email it to a recruiter at along with a copy of your resume; OR

• Apply onUSAJOBS;OR

• Apply onAirline Apps.

Stay Updated Opt into CBPs talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. Youll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

• Government & Military

About the Company

Atomus’ mission is to provide world-class cybersecurity for the world’s most critical organizations. We build security compliance software delivered as managed services sold directly, with relevant professional services and support. Our commercial customers include hypersonic aircraft companies, satellite and space mission systems companies, AI and software companies, among many others serving primarily the aerospace and defense industry. At Atomus we are hardworking, we move fast, and we put our customers first.

About the Role

As a Business Operations Intern, you’ll play a key role in keeping our fast-moving team running smoothly—from coordinating product shipments and managing our Shopify store to planning team events and supporting the cofounders on strategic projects. We’re looking for someone who moves quickly, leans on AI tools to work smarter, and has a sharp eye for design and detail. This is a hands-on role where you’ll gain real experience across every facet of a growing cybersecurity startup.

Responsibilities

• Coordinate and manage physical shipments of security products to customers, including tracking orders, preparing packages, and communicating delivery timelines
• Help manage and maintain the company’s Shopify store, including inventory tracking, product listings, and order fulfillment
• Plan and coordinate team events and travel logistics
• Support the cofounders on a variety of strategic and operational projects as priorities evolve
• Manage office supply and snack ordering to keep the team well-stocked and happy
• Leverage AI tools and agents (e.g., Claude, ChatGPT, automation platforms) to streamline workflows and increase efficiency across tasks

Qualifications

• Currently enrolled in a Bachelor’s or Associate’s degree program at a Bay Area college or university, ideally pursuing a technical degree (e.g., Computer Science, Engineering, Information Systems, Business Analytics)
• Demonstrated proficiency with AI tools and a strong preference for using AI agents (e.g., Claude, Lovable) to get work done faster
• A good eye for design—whether it’s formatting a document, laying out a slide deck, or organizing a storefront
• Strong organizational skills and attention to detail
• Excellent written and verbal communication skills
• Comfortable managing logistics and coordinating shipments or deliveries
• Thrives in a fast-paced environment and can juggle multiple priorities with minimal direction
• Reliable, self-motivated, and able to work independently
• Ability to work in-office in downtown San Francisco 10–20 hours per week

Preferred Skills

• Interest in cybersecurity, technology, or the startup ecosystem
• Experience with Lovable or similar AI-powered app building tools
• Experience with Shopify or other e-commerce platforms
• Experience coordinating events, travel, or conference logistics
• Previous experience with shipping, logistics, or inventory management
• Familiarity with project management tools (e.g., Asana, Trello, Notion)
• Familiarity with design tools (e.g., Canva, Figma) for light creative tasks
• Previous internship or work experience in an office or operations role

Pay range and compensation package

Competitive hourly pay. Flexible scheduling around your class schedule (10–20 hours/week). Mentorship and hands-on exposure to multiple areas of a growing cybersecurity company. A collaborative, supportive team culture in a downtown San Francisco office.

A fast-growing robotics company is building autonomous systems designed to automate repetitive tasks within the global infrastructure and construction sector. The company’s mission is to help address workforce shortages while accelerating the development of critical infrastructure projects.

Their robotics platforms combine advanced autonomous navigation, cloud software, and intelligent field tools to improve precision and efficiency across construction environments. With a growing fleet of robots already deployed across multiple project sites globally, the company is developing the next generation of automation tools used in areas such as infrastructure development, surveying, energy projects, and large-scale construction.

The company is seeking a Full-stack Developer to design and maintain the software systems that power its robotics ecosystem — including operator dashboards, cloud infrastructure, and applications that interface with robots operating in the field.

This role will contribute to building reliable tools for mission planning, fleet monitoring, and communication between cloud systems and robotic platforms. The position involves close collaboration with robotics engineers, field operations teams, and product stakeholders to ensure the software delivers measurable impact in real-world environments.

Key Responsibilities

• Design and develop full-stack applications for device management, mission control, and fleet coordination.
• Build and maintain mobile applications used by field operators.
• Develop desktop applications used to interface with robotic systems.
• Create web dashboards and APIs for mission planning, telemetry visualization, and operational data analysis.
• Integrate cloud infrastructure for data storage, monitoring, and deployment.
• Ensure reliable communication between cloud services and deployed robotic systems.
• Collaborate with robotics, product, and field teams to deliver integrated software functionality.
• Write technical documentation for APIs, system architecture, and software modules.
• Optimize systems for scalability, reliability, and performance in field environments.
• Requirements
• Education
• Bachelor’s or Master’s degree in Computer Science, Software Engineering, or a related field.

Experience

• 4+ years of professional full-stack development experience.
• Strong experience with JavaScript / TypeScript using modern frameworks such as React, Next.js, and Node.js.
• Strong UI/UX development experience using modern CSS frameworks.
• Experience building mobile applications using React Native.
• Experience developing cross-platform desktop applications.
• Production experience with cloud platforms such as AWS including APIs, storage, and deployment pipelines.
• Strong understanding of software architecture, testing methodologies, and performance optimization.
• Proficiency with development tools including Git, issue tracking systems, and CI/CD pipelines.

Soft Skills

• Strong analytical and problem-solving ability.
• Ability to collaborate effectively in a fast-paced engineering environment.
• Strong ownership mindset and communication skills.
• Preferred Qualifications
• Experience working with robotics systems or robotics middleware.
• Familiarity with real-time communication protocols such as WebSockets or MQTT.
• Experience working with IoT devices, connected hardware, or industrial systems.
• Experience working with performance-sensitive or multi-threaded applications.
• Experience with containerization technologies such as Docker or Kubernetes.

• This role will involve collaborating with partners who source coupons and spearheading initiatives to enhance the consumer experience.
• Currently, there are eight different ideas being explored. The individual in this role will take ownership of each idea, thinking through the necessary systems and engaging with stakeholders to drive clarity. The focus will be on strategic oversight rather than heavy engineering, as we have a dedicated engineering team.
• A successful candidate should be able to navigate the integration of Order Management Systems (OMS) and loyalty programs, ensuring timelines are met.
• The role requires setting high-level, long-term goals for digital coupons, envisioning the future direction, and exploring additional opportunities for innovation.
• The individual will be responsible for building a solid product with an easy-to-use flow for coupons, ensuring a seamless experience for consumers.

Technical Designer, Furniture

SAUSALITO, CA

Serena & Lily is seeking a Technical Furniture Designer to join our Design Team. The ideal candidate will be responsible for the technical development process of all furniture categories. This role involves ensuring that quality, accuracy and on time execution in a cost-effective manner of all furniture projects from concept to production, are met while maintaining brand integrity. This position reports directly to CDO.

RESPONSIBILITIES:

• Translate design direction from CDO into detailed technical specs with accurate renderings to illustrate concept ideals.
• Develop and implement product development strategies aligned with company goals and market trends.
• Identify opportunities for innovation in furniture production, materials, and production processes.

Project Management

• Translate design direction from CDO into detailed technical specs with accurate renderings to illustrate concept ideals.
• Oversee the product development lifecycle, from initial renderings to cads, to sample and swatch reviews.
• Clearly communicate to agents and vendors calls outs and comments in a timely manner.
• Develop new finishes and color panels and ensure consistency through production.
• Ensure projects are delivered on time, within budget, and meet quality standards.
• Own the sharing of information in weekly PD meetings.
• Keep all documents and shared tools current and up to date.
• Maintain and organize swatch libraries.
• Cad all cushions where applicable and all outdoor covers for outdoor collections.
• Confirm PI sheets are accurate.
• Review and comment on furniture renewal swatches in a timely manner.

Quality & Compliance

• Establish and maintain quality assurance protocols throughout the product development process.
• Ensure all products meet regulatory and safety standards for target markets.
• Address and resolve product issues promptly and effectively.

Key Personal Attributes

• Strategic thinking and ability to align product development with business goals.
• Strong problem-solving skills and adaptability in a dynamic environment.
• Attention to detail and commitment to quality.
• Collaborative mindset with the ability to develop strong cross functional and respectful relationships.
• Strong work ethic with an ability to turn on a dime.
• Be part of a small tight knit team with a desire to jump in where needed to assist in department projects.

QUALIFICATIONS:

• Bachelor’s degree in industrial design, Product Development, Engineering, or related field.
• 5+ years of experience in furniture product development.
• Strong knowledge of furniture design, materials, manufacturing processes, and industry standards.
• Proven track record of managing multiple complex product development projects.
• Excellent leadership, communication, and interpersonal skills.
• A high level of proficiency in design software (e.g., AutoCAD, SolidWorks) and project management tools.
• Experience with sustainability practices in furniture design is a plus.

COMPENSATION:

• $100-130k per year is the anticipated starting base pay for this role. This range represents the low and high end of the anticipated base salary range for this role. The actual base pay is dependent upon many factors, such as: experience, education, and skills.
• Employees (and their families) are covered by medical, dental, vision, and basic life insurance should they choose to participate in Serena & Lily’s benefits. Employees can enroll in our company’s 401k plan. During the first year of employment, full-time employees accrue twenty-one days of PTO and seven paid holidays throughout the year.

Head of Operations and Manufacturing Ripple Medical | California (Hybrid or Remote) | Full-Time

ABOUT RIPPLE MEDICAL

Ripple Medical is a health tech company on a mission to revolutionize hypertension management with our cuffless blood pressure wearable. Once cleared by FDA, our product will enable patients to easily and accurately monitor blood pressure at home, empowering them and their providers with actionable data to improve outcomes. We're a collaborative, mission-driven team of 33 working in a medical device regulatory environment to bring this technology to the millions of patients who can benefit.

POSITION SUMMARY

The Head of Operations and Manufacturing will own the end-to-end operational infrastructure required to bring Ripple's FDA-regulated cuffless blood pressure monitor to market and scale production. This is a hands-on leadership role for someone who thrives building from zero to one in a regulated environment: selecting contract manufacturers, standing up supply chains compliant with FDA 21 CFR Part 820, establishing ISO 13485-certified quality management systems, and preparing for direct-to-patient fulfillment.

As a company preparing for 510(k) submission and commercial launch, this role is critical to ensuring we can reliably manufacture and deliver a high-quality, FDA-cleared medical device at scale. The ideal candidate brings deep experience in medical device manufacturing (particularly wearable or electro-optical devices), understands regulated hardware supply chains and design transfer, and can roll up their sleeves while building the team and processes for long-term growth.

This position reports directly to the CEO with high visibility to the leadership team and Board of Directors.

KEY RESPONSIBILITIES

Manufacturing & Production

• Lead selection and onboarding of contract manufacturing partners with Class II medical device experience, including RFQ, quality audits, contract negotiation, and ongoing management.
• Own design transfer and manufacturing transfer, working with engineering on DFM principles, Device Master Record (DMR) requirements, and production readiness.
• Establish production planning, forecasting, and capacity management for V&V builds, pilot production, and volume manufacturing.
• Drive continuous improvement in yield, quality, and cost while maintaining FDA and ISO compliance.
• Oversee pilot runs and scale-up, including process validation (IQ/OQ/PQ) and manufacturing controls.

Supply Chain & Procurement

• Build and manage the end-to-end supply chain, including component sourcing, supplier qualification, and inventory management per FDA purchasing controls.
• Develop supplier relationships and negotiate terms while ensuring supply continuity, traceability, and risk mitigation.
• Implement inventory planning to balance working capital with service levels, including buffer strategies for Year 1 launch.
• Monitor and mitigate supply chain risks: component shortages, single-source dependencies, geopolitical factors, and logistics disruptions.

Quality & Regulatory Compliance

• Maintain and improve the ISO 13485-certified QMS in partnership with the quality and regulatory team, ensuring FDA 21 CFR Part 820 compliance.
• Support 510(k) submission activities related to manufacturing, including process validation documentation, DMR development, and device history records (DHR).
• Define incoming inspection, in-process controls, and final product testing consistent with the risk management file.
• Manage product certifications for a Class II device, including FDA registration, UDI compliance, and applicable international requirements.
• Lead root cause analysis and CAPA for quality issues, ensuring post-market surveillance compliance.

Fulfillment & Logistics

• Design the direct-to-patient fulfillment strategy, including 3PL selection with FDA-cleared Class II device experience.
• Establish logistics and distribution for nationwide shipping of a regulated device with chain-of-custody and traceability.
• Develop returns, replacement, and warranty processes that balance patient experience, cost, and compliance.

Team & Organizational Development

• Start as an individual contributor who executes hands-on, then build and lead the operations team through 510(k) clearance and commercial launch.
• Establish operational metrics and dashboards for manufacturing, supply chain, and quality performance.
• Partner with finance on cost modeling, COGS optimization, and operational budgeting.
• Collaborate cross-functionally with engineering, software, regulatory, and commercial teams.

QUALIFICATIONS

• 7-12 years in manufacturing, operations, or supply chain, with 3-5+ years in medical devices (Class II preferred), wearables, or regulated hardware.
• Experience managing contract manufacturers for regulated medical devices, preferably in Asia and/or domestically.
• Experience at or with CMs/EMS providers (Flex, Jabil, Celestica, Plexus, Sanmina) in Class II medical device or wearable programs is a strong plus.
• Track record of design transfer and scaling production from pilot to volume for regulated products.
• ISO 13485 and FDA 21 CFR Part 820 experience required.
• Familiarity with the 510(k) process and manufacturing documentation (process validations, DMR/DHR) strongly preferred.
• Bachelor's in Engineering, Supply Chain, Operations, Biomedical Engineering, or related field; MBA or advanced degree a plus.
• Based in California or travel up to 25%.

COMPENSATION

• Base Salary: $160,000 - $210,000 USD
• Performance Bonus: Tied to company milestones and personal objectives
• Equity: Early-stage stock option grant with meaningful ownership
• 100% Employer-Paid Healthcare: Medical, dental, and vision
• Additional Benefits: 401(k) with company match, flexible PTO